biblio
“Taco complex derived from a bis-crown ether capable of executing molecular logic operation through reversible complexation”, Journal of Organic Chemistry, vol. 77, no. 16, pp. 6789–6800, 2012.
, “Interfacing biology with nanoparticles”, Current Applied Physics, vol. 5, no. 2, pp. 118-127, 2005.
, “Colossal photo-conductive gain in low temperature processed TiO2 films and their application in quantum dot solar cells”, Applied Physics Letters, vol. 110, no. 12, p. Article Number: 123902, 2017.
, “Thiol and halometallate, mutually passivated quantum dot ink for photovoltaic application”, ACS Applied Materials & Interfaces, vol. 11, no. 29, pp. 26100-26108, 2019.
, “Alginate and hydrotalcite-like anionic clay composite systems: synthesis, characterization and application studies”, Microporous and Mesoporous Materials, vol. 158, pp. 241-246, 2012.
, “Adsorption of fluoride ions by Zn-Al layered double hydroxides”, Applied Clay Science, vol. 40, no. 1-4, pp. 54-62, 2008.
, “Preparation of spherical particles of 1,1-diamino-2,2-dinitroethene (FOX-7) using a micellar nanoreactor”, Organic Process Research & Development, vol. 16, no. 11, pp. 1711-1716, 2012.
, “Studies on [3]pseudorotaxane formation from a bis-azacrown derivative as host and imidazolium ion-derivatives as guest”, Organic & Biomolecular Chemistry, vol. 9, no. 13, pp. 4811-4817, 2011.
, “Keggin ion mediated synthesis of hydrophobized pd nanoparticles for multifunctional catalysis”, Langmuir, vol. 21, no. 6, pp. 2408-2413, 2005.
, “Azoic dye hosted in layered double hydroxide: physicochemical characterization of the intercalated materials”, Langmuir, vol. 25, no. 18, pp. 10980-10986, 2009.
, “Cellulose supported layered double hydroxides for the adsorption of fluoride from aqueous solution”, Chemosphere, vol. 72, no. 6, pp. 995-998, 2008.
, “Feasibility of ionization-mediated pathway for ultraviolet-induced melanin damage”, Journal of Physical Chemistry B, vol. 119, no. 42, pp. 13288-13293, 2015.
, “Preparation of colourless phosphate glass by stabilising higher Fe[II] in microwave heating”, Scientific Reports, vol. 8, p. 6195, 2018.
, “Photo-responsive pseudorotaxanes and assemblies”, Chemical Society Reviews, vol. 44, no. 3, pp. 663-676, 2015.
, “Quantum dots coupled to an oriented two-dimensional crystalline matrix for solar cell application”, ACS Applied Materials & Interfaces, vol. 10, no. 45, pp. 39074-39082, 2018.
, “Adsorption of aqueous selenite [Se(IV)] species on synthetic layered double hydroxide materials”, Industrial & Engineering Chemistry Research, vol. 48, no. 17, pp. 7893-7898, 2009.
, “Silver nanoparticles of variable morphology synthesized in aqueous foams as novel templates”, Bulletin of Materials Science, vol. 28, no. 5, pp. 503-510, 2005.
, “Molecular interactions, proton exchange, and photoinduced processes prompted by an inclusion process and a [2]pseudorotaxane formation”, Journal of Organic Chemistry, vol. 78, no. 18, pp. 9004-9012, 2013.
, “Modeling & simulation of micro reactor with nitration of 2-methyl-4,6 dihydroxy-pyrimidine”, Science and Technology of Energetic Materials, vol. 72, no. 1-2, pp. 9-20, 2011.
, “Recognition of Hg2+ion through restricted imine isomerization: crystallographic evidence and imaging in live cells”, Organic Letters, vol. 14, no. 12, pp. 2980–2983, 2012.
, “Structural characterization of azoic dye hosted layered double hydroxides”, Zeitschrift fur Kristallographie, vol. 224, no. 5-6, pp. 282-286, 2009.
, “Defluoridation of water using as-synthesized Zn/Al/Cl anionic clay adsorbent: equilibrium and regeneration studies”, Journal of Hazardous Materials, vol. 167, no. 1-3, pp. 873-878, 2009.
, “Realistic host-vector transmission model for describing malaria prevalence pattern”, Bulletin of Mathematical Biology, vol. 75, no. 12, pp. 2499-2528, 2013.
, “Valorization of cow urine and dung: A model biorefinery (2018)”, Waste and Biomass Valorization, vol. 11, no. 3, pp. 1-14, 2020.
, “Environmental impact study of bagasse valorization routes”, Waste and Biomass Valorization, vol. 10, no. 7, pp. 2067-2078, 2018.
, “Proposing efficient new pendant group polymer electrolyte membranes for fuel cells: a computational study”, Journal of Physical Chemistry C, vol. 118, no. 2, pp. 784-795, 2014.
, “Synthesis and characterization of hypercrosslinked hydroxyl functionalized co-polymer beads”, European Polymer Journal, vol. 59, pp. 46-58, 2014.
, “Developing spherical activated carbons from polymeric resins for removal of contaminants from aqueous and organic streams”, International Journal of Environmental Science and Technology, vol. 19, no. 10, pp. 10021-10040, 2022.
, “Interfacial tension approach toward drug loading with two-dimensional crosslinked polymer embedded gold: adsorption kinetics evaluation”, International Journal Of Polymeric Materials And Polymeric Biomaterials, vol. 65, no. 4, pp. 168-175, 2016.
, “Influence of carbon based supports on selectivity behavior of diols and propanol in Ru catalyzed glycerol hydrogenolysis”, Applied Catalysis B: Environmental, vol. 204, 2017.
, “Crosslinked polymer embedded Cu/Ag for comparative drug adsorption and kinetics evaluation”, International Journal of Polymeric Materials and Polymeric Biomaterials, vol. 65, no. 6, pp. 285-293, 2016.
, “Synthesis and characterization of thermotropic liquid crystalline polyimides”, Bulletin of Materials Science, vol. 38, no. 6, pp. 1553-1559, 2015.
, “Acetic acid-catalyzed regioselective C(sp(2))-H bond functionalization of indolizines: concomitant involvement of synthetic and theoretical studies”, Journal of Organic Chemistry, vol. 87, no. 8, pp. 5097-5112, 2022.
, “Continuous dehydration and hydrogenolysis of glycerol over non-chromium copper catalyst: laboratory-scale process studies”, Organic Process Research & Development, vol. 16, no. 5, pp. 1043-1052, 2012.
, “Treatment of spentwash using chemically modified bagasse and colour removal studies”, Bioresource Technology, vol. 97, no. 14, pp. 1752-1755, 2006.
, “Computational study of metal free alcohol dehydrogenation employing frustrated lewis pairs”, Journal of Organic Chemistry, vol. 80, no. 4, pp. 2081-2091, 2015.
, “Novel hybrid cavitation process for enhancing and altering rate of disinfection by use of natural oils derived from plants”, Ultrasonics Sonochemistry, vol. 61, p. 104820, 2020.
, “Metal-free regioselective cross dehydrogenative coupling of cyclic ethers and aryl carbonyls”, Journal of Organic Chemistry, vol. 84, no. 4, pp. 2039-2047, 2019.
, “Hyperhydrophilic three-dimensional crosslinked beads as an effective drug carrier in acidic medium: adsorption isotherm and kinetics appraisal”, New Journal of Chemistry, vol. 39, no. 5, pp. 3835-3844, 2015.
, “Isolation and characterization of chitosans from different fungi with special emphasis on zygomycetous dimorphic fungus benjaminiella poitrasii: evaluation of its chitosan nanoparticles for the inhibition of human pathogenic fungi”, Biomacromolecules, p. null, 2022.
, “Exploring the potential of doped zero-dimensional cages for proton transfer in fuel cells: a computational study”, Journal of Physical Chemistry B, vol. 116, no. 32, pp. 9803-9811, 2012.
, “Visible light mediated, metal and oxidant free highly efficient cross dehydrogenative coupling (CDC) reaction between quinoxalin-2(1H)-ones and ethers”, New Journal of Chemistry, vol. 43, no. 19, pp. 7403-7408, 2019.
, “Effect of preparation parameters of Cu catalysts on their physico-chemical properties and activities for glycerol hydrogenolysis”, Catalysis Today, vol. 198, no. 1, pp. 321-329, 2012.
, “Racemic drug resolution: a comprehensive guide”, Analytical Methods, vol. 8, no. 42, pp. 7567-7586, 2016.
, “Trending methods employed for polymerization induced self-assembly”, New Journal of Chemistry, vol. 44, no. 17, pp. 6690-6698, 2020.
, “Visible light-promoted, photocatalyst-free C(sp(2))-H bond functionalization of indolizines via EDA complexes”, European Journal of Organic Chemistry, vol. 2022, no. 18, p. e202200261, 2022.
, “Short enantioselective total synthesis of (+)-tofacitinib”, Tetrahedron Letters, vol. 67, p. 152838, 2021.
, “Advances of hydrazone linker in polymeric drug delivery”, Journal of Critical Reviews, vol. 6, no. 2, pp. 1-4, 2019.
, “Design and synthesis of cauliflower-shaped hydroxyl functionalized core-shell polymer”, Designed Monomers and Polymers, vol. 18, no. 8, pp. 723-733, 2015.
, “Role of aliphatic hydrocarbon content in non-solvating porogens toward porosity of cross-linked microbeads”, Polymer, vol. 86, pp. 8-14, 2016.
, “Highly sensitive label-free bio-interfacial colorimetric sensor based on silk fibroin-gold nanocomposite for facile detection of chlorpyrifos pesticide”, Scientific Reports, vol. 10, no. 1, p. 4198, 2020.
, “Role of interfacial tension of solvating diluents and hydrophilic-hydrophobic cross-linkers in hyper-cross-linked solid supports”, Industrial & Engineering Chemistry Research, vol. 54, no. 27, pp. 6893-6901, 2015.
, “Safe water and technology initiative for water disinfection: application of natural plant derived materials”, Journal of Water Process Engineering, vol. 43, p. 102280, 2021.
, “Selective solid-phase extraction of metal for water decontamination”, Journal of Applied Polymer Science, vol. 133, no. 1, p. 42849, 2016.
, “Green adeptness in synthesis of non-toxic copper and cobalt oxide nanocomposites with multifaceted bioactivities”, Cancer Nanotechnology, vol. 14, no. 1, p. 79, 2023.
, “Effect of Ru precursors and reduction conditions on catalyst performance in glycerol hydrogenolysis”, ChemistrySelect, vol. 2, no. 4, pp. 1734-1745, 2017.
, “Simultaneous glycerol dehydration and in situ hydrogenolysis over Cu-Al oxide under an inert atmosphere”, Green Chemistry, vol. 14, no. 10, pp. 2780-2789, 2012.
, “Optimization for the production of mycelial biomass from Benjaminiella poitrasii to isolate highly deacetylated chitosan”, Journal of Polymer Materials, vol. 34, no. 1, pp. 145-156, 2017.
, “Active sites in modified copper catalysts for selective liquid phase dehydration of aqueous glycerol to acetol”, RSC Advances, vol. 3, no. 37, pp. 16499-16508, 2013.
, “Destroying antimicrobial resistant bacteria (AMR) and difficult, opportunistic pathogen using cavitation and natural oils/plant extract”, Ultrasonics Sonochemistry, vol. 69, p. 105272, 2020.
, “Effect of composition and pretreatment parameters on activity and stability of Cu-Al catalysts for water-gas shift reaction”, ChemCatChem, vol. 6, no. 6, pp. 1698-1706, 2014.
, “Role of promoters in copper chromite catalysts for hydrogenolysis of glycerol”, Catalysis Today, vol. 164, no. 1, pp. 447-450, 2011.
, “Review on non-noble metal catalysts for glycerol hydrodeoxygenation to 1,2-propanediol with and without external hydrogen”, Green Chemistry, vol. 24, no. 18, pp. 6751-6781, 2022.
, “Less frustration, more Activity—theoretical insights into frustrated lewis pairs for hydrogenation catalysis”, ChemCatChem, vol. 9, no. 15, pp. 3013-3022, 2017.
, “Selectivity tuning options in hydrogenation of m-chloronitrobenzene to m-chloroaniline over mono- and bimetallic supported Pt catalysts”, Industrial & Engineering Chemistry Research, vol. 51, no. 48, pp. 15564-15572, 2012.
, “Synthesis of 3 alkyl and 1,3-Bis(alkyl)indolizine amides from a-bromohydroxamates”, Tetrahedron Letters, vol. 118, p. 154386, 2023.
, “Cu:Al Nano catalyst for selective hydrogenolysis of glycerol to 1,2-propanediol”, Catalysis Letters, vol. 135, no. 1-2, pp. 141-147, 2010.
, “High throughput screening of inhibitors for tuberculosis at NCL : a novel drug discovery initiative from CSIR”, in 73rd CSIR Foundation Day, at CSIR-National Chemical Laboratory, Pune, CSIR-National Chemical Laboratory, Pune, 2015.
, “Understanding the stability of an unprecedented Si-Be bond within quantum confinement”, ACS Omega, vol. 8, no. 16, pp. 14814-14822, 2023.
, “Quantum dot (Aun/Agn, n=3-8) capped single lipids: interactions and physicochemical properties”, Physical Chemistry Chemical Physics, vol. 25, no. 33, pp. 22294-22303, 2023.
, “Mapping the finite-temperature behavior of conformations to their potential energy barriers: case studies on Si6B and Si5B clusters”, ACS Omega, vol. 7, no. 7, pp. 6167-6173, 2022.
, “Hydrogen evolution by a low cost photocatalyst: bauxite residue”, International Journal of Hydrogen Energy, vol. 35, no. 20, pp. 10859-10866, 2010.
, “Photocatalytic degradation of phenolics by N-doped mesoporous titania under solar radiation”, International Journal of Photoenergy, p. Article No. 780562, 2012.
, “Enhanced nucleation of polypropylene by metal-organic frameworks (MOFs) based on aluminium dicarboxylates: influence of structural features”, RSC Advances, vol. 6, no. 3, pp. 1907-1912, 2016.
, “Role of the molecular structure of carboxylate-alumoxanes in the enhanced nucleation of polypropylene”, Chemical Communications, vol. 51, no. 49, pp. 10026-10029, 2015.
, “Electronically integrated mesoporous Ag-TiO2 nanocomposite thin films for efficient solar hydrogen production in direct sunlight”, Energy Technology, vol. 10, no. 1, p. 2100356, 2021.
, “New understanding on regulating the crystallization and morphology of the beta-polymorph of isotactic polypropylene based on carboxylate-alumoxane nucleating agents”, Macromolecules, vol. 49, no. 6, pp. 2197-2205, 2016.
, “Comparative investigation on the catalytic performance of HT/SBA-15 and SBA-15/HT composites for the isomerization of glucose to fructose”, Materials Science and Engineering B-Advanced Functional Solid-State Materials, vol. 286, p. 116052, 2022.
, “Role of surface synergistic effect on the performance of Ni-based hydrotalcite catalyst for highly efficient hydrogenation of furfural”, Journal of Molecular Catalysis A-Chemical, vol. 417, pp. 153-162, 2016.
, “Crystallization and preliminary X-ray characterization of a thermostable low-molecular-weight 1,4-beta-D-glucan glucohydrolase from an alkalothermophilic thermomonospora sp.”, Acta Crystallographica Section F-Structural Biology and Crystallization Communications, vol. 62, pp. 385-387, 2006.
, “Tuning the basicity of Cu-based mixed oxide catalysts towards the efficient conversion of glycerol to glycerol carbonate”, Molecular catalysis, vol. 460, pp. 53-62, 2018.
, “Promotional effect of Fe on the performance of supported Cu catalyst for ambient pressure hydrogenation of furfural”, RSC Advances, vol. 6, no. 5, pp. 3888-3898, 2016.
, “Antibacterial and anti-HIV metabolites from marine streptomyces albus MAB56 isolated from Andaman and Nicobar Islands, India”, Applied Biochemistry and Biotechnology, vol. 195, no. 12, pp. 7738-7754, 2023.
, “Distribution and bioprospecting potential of actinobacteria from Indian mangrove ecosystems”, in Microbial Diversity in Ecosystem Sustainability and Biotechnological Applications, Springer, Singapore, 2019, pp. 319-353.
, “Structural, magnetic, dielectric and magnetodielectric properties of Bi1-xCaxFe1-xMnxO3 in the morphotropic phase boundary region”, Materials Research Express, vol. 4, no. 1, p. Article Number: 016104, 2017.
, “Mesoporous tin oxide: an efficient catalyst with versatile applications in acid and oxidation catalysis”, Catalysis Today, vol. 309, pp. 61-76, 2018.
, “Ready access to benzannulated [5,5]-oxaspirolactones using Au(III)-catalyzed cascade cyclizations”, Journal of Organic Chemistry, vol. 87, no. 5, pp. 3025-3041, 2022.
, “Herbicidal bio-assay of isocladosporin enantiomers and determination of its plausible absolute configuration”, Journal of Antibiotics, vol. 74, no. 4, pp. 280-284, 2021.
, “Coherent fusion of water array and protonated amine in a metal-sulfate-based coordination polymer for proton conduction”, Inorganic Chemistry, vol. 54, no. 11, pp. 5366-5371, 2015.
, “Ultrahigh ionic conduction in water-stable close-packed metal-carbonate frameworks”, Inorganic Chemistry, vol. 56, no. 16, pp. 9710-9715, 2017.
, “Microporous 3D-structured hierarchically entangled graphene-supported Pt3Co alloy catalyst for PEMFC application with process-friendly features”, ACS Applied Materials & Interfaces, vol. 15, no. 23, pp. 28023-28035, 2023.
, “Zinc-air batteries catalyzed using Co3O4 nanorod-supported N-doped entangled graphene for oxygen reduction reaction”, ACS Applied Energy Materials, vol. 4, no. 5, pp. 4570-4580, 2021.
, “Why does water accelerate organic reactions under heterogeneous condition?”, Journal of Physical Chemistry A, vol. 117, no. 12, pp. 2446-2454, 2013.
, “Air-cathode interface-engineered electrocatalyst for solid-state rechargeable zinc-air batteries”, ACS Applied Energy Materials, vol. 5, no. 7, pp. 8756-8768, 2022.
, “Atypical energetic and kinetic course of excited-state intramolecular proton transfer (ESIPT) in room-temperature protic ionic liquids”, Journal of Physical Chemistry B, vol. 118, no. 9, pp. 2487-2498, 2014.
, “NiFe layered double hydroxide-decorated N-doped entangled-graphene framework: a robust water oxidation electrocatalyst”, Nanoscale Advances, vol. 2, no. 4, pp. 1709-1717, 2020.
, “Invoking pairwise interactions in water-promoted diels-alder reactions by using ionic liquids as cosolvents”, Chemphyschem, vol. 15, no. 14, pp. 3067-3077, 2014.
, “Fluorobenzoic acid coformers to improve the solubility and permeability of the BCS class IV drug naftopidil”, Chemical Communications, vol. 58, no. 37, pp. 5582-5585, 2022.
, “Curcumin-artemisinin coamorphous solid: Xenograft model preclinical study”, Pharmaceutics, vol. 10, no. 1, p. Article Number: 7, 2018.
, “Enhanced solubility, permeability, and tabletability of nicorandil by salt and cocrystal formation”, Crystengcomm, vol. 23, no. 1, pp. 227-237, 2021.
,