biblio
, “1000-fold enhancement in proton conductivity of a MOF using post-synthetically anchored proton transporters”, Scientific Reports, vol. 6, p. 32489, 2016.
, “1D alignment of PEDOT in a buckypaper for high-performance solid supercapacitors”, Chemelectrochem, vol. 3, no. 9, pp. 1329-1336, 2016.
, “1-Dimensional confinement of porous polyethylenedioxythiophene using carbon nanofibers as a solid template: an efficient charge storage material with improved capacitance retention and cycle stability”, RSC Advances, vol. 3, no. 29, pp. 11877-11887, 2013.
, “2D layered nanomaterials as fillers in polymer composite electrolytes for lithium batteries”, Advanced Energy Materials, vol. 13, no. 15, 2023.
, “3D Hexaporous carbon assembled from single-layer graphene as high performance supercapacitor”, Chemsuschem, vol. 5, no. 11, pp. 2159-2164, 2012.
, “3-D nanoribbon-like Pt-free oxygen reduction reaction electrocatalyst derived from waste leather for anion exchange membrane fuel cells and zinc-air batteries”, Nanoscale, vol. 11, no. 16, pp. 7893-7902, 2019.
, “3D polyaniline porous layer anchored pillared graphene sheets: enhanced interface joined with high conductivity for better charge storage applications”, ACS Applied Materials & Interfaces, vol. 7, no. 14, pp. 7661-7669, 2015.
, “3-Dimensionally self-assembled single crystalline platinum nanostructures on few-layer graphene as an efficient oxygen reduction electrocatalyst”, RSC Advances, vol. 3, no. 19, pp. 6913-6921, 2013.
, “Activated nitrogen doped graphene shell towards electrochemical oxygen reduction reaction by its encapsulation on Au nanoparticle (Au@N-Gr) in water-in-oil ``nanoreactors''”, Journal of Materials Chemistry A, vol. 2, no. 5, pp. 1383-1390, 2014.
, “Activity modulated low platium content oxygen reduction electrocatalysts prepared by inducing nano-order dislocations on carbon nanofiber through N-2-doping”, Journal of Physical Chemistry C, vol. 116, no. 28, pp. 14754-14763, 2012.
, “Activity tuning of cobalt ferrite nanoparticles anchored on N-doped reduced graphene oxide as a potential oxygen reduction electrocatalyst by Zn substitution in the spinel matrix”, Chemistry Select, vol. 2, no. 26, pp. 7845-7853, 2017.
, “Air-cathode interface-engineered electrocatalyst for solid-state rechargeable zinc-air batteries”, ACS Applied Energy Materials, vol. 5, no. 7, pp. 8756-8768, 2022.
, “Artificially designed membranes using phosphonated multiwall carbon nanotube-polybenzimidazole composites for polymer electrolyte fuel cells”, Journal of Physical Chemistry Letters, vol. 1, no. 14, pp. 2109-2113, 2010.
, “Binder-free and flexible VOPO4/CNT film as cathode for aqueous rechargeable Zn-metal battery”, Advanced Sustainable Systems, vol. 7, no. 9, 2023.
, “Biomass-derived activated carbon material from native European deciduous trees as an inexpensive and sustainable energy material for supercapacitor application”, Journal of Energy Storage, vol. 34, p. 102178, 2021.
, “Can enantiomer ligands produce structurally distinct homochiral MOFs?”, CrystEngComm, vol. 17, no. 42, pp. 8202-8206, 2015.
, “Carbon derived from soft pyrolysis of a covalent organic framework as a support for small-sized RuO2 showing exceptionally low overpotential for oxygen evolution reaction”, ACS Omega, vol. 4, no. 8, pp. 13465-13473, 2019.
, “Carbon nanofiber with selectively decorated pt both on inner and outer walls as an efficient electrocatalyst for fuel cell applications”, Journal of Physical Chemistry C, vol. 113, no. 40, pp. 17572-17578, 2009.
, “Carbon nanofiber-RuO2-poly(benzimidazole) ternary hybrids for improved supercapacitor performance”, RSC Advances, vol. 3, no. 7, pp. 2428-2436, 2013.
, “Carbon nanohorn-derived graphene nanotubes as a platinum-free fuel cell cathode”, ACS Applied Materials & Interfaces, vol. 7, no. 43, pp. 24256-24264, 2015.
, “Chitosan intercalated metal organic gel as a green precursor of fe entrenched and fe distributed N-doped mesoporous graphitic carbon for oxygen reduction reaction”, Chemistryselect, vol. 2, no. 28, pp. 8762-8770, 2017.
, “Co (9) S (8) nanoparticle-supported nitrogen-doped carbon as a robust catalyst for oxygen reduction reaction in both acidic and alkaline conditions”, ChemElectroChem, vol. 7, no. 14, pp. 3123-3134, 2020.
, “Cobalt-manganese modified theophrastite phase of nickel hydroxide nanoflower arrays on nickel foam as a self-standing bifunctional electrode for overall water electrolysis”, Sustainable Energy & Fuels, vol. 7, no. 10, pp. 2428-2440, 2023.
, “Cobalt-modified covalent organic framework as a robust wateroxidation electrocatalyst”, Chemistry of Materials, vol. 28, no. 12, pp. 4375-4379, 2016.
, “Co@CoAl-layered double hydroxide/nitrogen-doped graphene composite catalyst for Al-H2O-based batteries: simultaneous hydrogen production and electricity generation”, ChemElectroChem, vol. 7, no. 12, pp. 2582-2591, 2020.
, “Coherent fusion of water array and protonated amine in a metal-sulfate-based coordination polymer for proton conduction”, Inorganic Chemistry, vol. 54, no. 11, pp. 5366-5371, 2015.
, “Co-Ni layered double hydroxide for the electrocatalytic oxidation of organic molecules: an approach to lowering the overall cell voltage for the water splitting process”, ACS Applied Materials & Interfaces, vol. 14, no. 14, pp. 16222-16232, 2022.
, “Conjugated porous polymers as precursors for electrocatalysts and storage electrode materials”, Chemical Communications, vol. 52, no. 2, pp. 316-318, 2016.
, “Convergent covalent organic framework thin sheets as flexible supercapacitor electrodes”, ACS Applied Material & Interfaces, vol. 10, no. 33, pp. 28139-28146, 2018.
, “Coordination polymers of Fe(III) and Al(III) ions with TCA ligand: distinctive fluorescence, CO2 uptake, redox-activity and oxygen evolution reaction”, Dalton Transactions, vol. 45, no. 16, pp. 6901-6908, 2016.
, “A copper(ii)-coordination polymer based on a sulfonic-carboxylic ligand exhibits high water-facilitated proton conductivity”, Dalton Transactions, vol. 48, no. 29, pp. 11034-11044, 2019.
, “CoSe2 supported on nitrogen-doped carbon nanohorns as a methanol-tolerant cathode for air-breathing microlaminar flow fuel cells”, Chemelectrochem, vol. 2, no. 9, pp. 1339-1345, 2015.
, “Covalent organic framework-cadmium sulfide hybrid as a prototype photocatalyst for visible-light-driven hydrogen production”, Chemistry A-European Journal, vol. 20, no. 48, pp. 15961-15965, 2014.
, “Cubic palladium nanorattles with solid octahedron gold core for catalysis and alkaline membrane fuel cell applications”, ChemCatChem, vol. 11, no. 17, pp. 4383-4392, 2019.
, “Cu-Pt nanocage with 3-D electrocatalytic surface as an efficient oxygen reduction electrocatalyst for a primary Zn-air battery”, ACS Catalysis, vol. 5, no. 3, pp. 1445-1452, 2015.
, “On demand electrochemical release of drugs from porous reduced graphene oxide modified flexible electrodes”, Journal of Materials Chemistry B, vol. 5, no. 32, pp. 6557-6565, 2017.
, “Dendrite growth suppression by Zn2+-integrated nafion ionomer membranes: beyond porous separators toward aqueous Zn/V2O5 batteries with extended cycle life ”, Energy Technology, vol. 7, no. 9, 2019.
, “Design of a high performance thin all-solid-state supercapacitor mimicking the active interface of its liquid-state counterpart”, ACS Applied Materials & Interfaces, vol. 5, no. 24, pp. 13397-13404, 2013.
, “Design of an "allsolid-state'' supercapacitor based on phosphoric acid doped polybenzimidazole (PBI) electrolyte”, Journal of Applied Electrochemistry, vol. 39, no. 7, pp. 1097-1103, 2009.
, “Dioxolanone-anchored poly(allyl ether)-based cross-linked dual-salt polymer electrolytes for high-voltage lithium metal batteries”, ACS Applied Materials & Interfaces, vol. 12, no. 1, pp. 567-579, 2020.
, “Distinctive PdCl2-mediated transformation of Fe-based metallogels into metal-organic frameworks”, Crystal Growth & Design, vol. 14, no. 7, pp. 3434-3437, 2014.
, “Domain size manipulation of perflouorinated polymer electrolytes by sulfonic acid-functionalized MWCNTs to enhance fuel cell performance”, Langmuir, vol. 25, no. 14, pp. 8299-8305, 2009.
, “Effect of b site coordination environment in the ORR activity in disordered brownmillerites Ba2In2-xCexO5+delta”, ACS Applied Materials & Interfaces, vol. 7, no. 5, pp. 3041-3049, 2015.
, “Effect of the viscosity of poly(benzimidazole) on the performance of a multifunctional electrocatalyst with an ideal interfacial structure”, Journal of Materials Chemistry A, vol. 1, no. 13, pp. 4265-4276, 2013.
, “Efficient electrochemical oxygen reduction to hydrogen peroxide by transition metal-doped silicate Sr0.7Na0.3SiO3-delta”, ACS Applied Materials & Interfaces, vol. 13, no. 1, pp. 382-390, 2021.
, “Efficient oxygen reduction electrocatalyst from graphene by simultaneously generating pores and nitrogen doped active sites”, Journal of Materials Chemistry, vol. 22, no. 45, pp. 23799-23805, 2012.
, “Electrochemical preparation of nitrogen-doped graphene quantum dots and their size-dependent electrocatalytic activity for oxygen reduction”, Bulletin of Materials Science, vol. 38, no. 2, pp. 435-442, 2015.
, “Electrochemically grown nanoporous MnO2 nanowalls on a porous carbon substrate with enhanced capacitance through faster ionic and electrical mobility”, Chemical Communications, vol. 50, no. 54, pp. 7188-7190, 2014.
, “Electrode|electrolyte interface enhancement in quasi-solid-state zinc-air batteries through an anion conducting polymer electrolyte interlayer by in situ polymerization”, Journal of Materials Chemistry A, vol. 11, no. 27, pp. 14776-14787, 2023.
, “Electrodeposited layered sodium vanadyl phosphate (NaxVOPO4 center dot nH(2)O) as cathode material for aqueous rechargeable zinc metal batteries”, Energy & Fuels, vol. 36, no. 12, pp. 6520-6531, 2022.
, “Electrodeposited polyethylenedioxythiophene with infiltrated gel electrolyte interface: a close contest of an all-solid-state supercapacitor with its liquid-state counterpart”, Nanoscale, vol. 6, no. 11, pp. 5944-5952, 2014.
, “Enhanced catalytic activity of polyethylenedioxythiophene towards tri-iodide reduction in DSSCs via 1-dimensional alignment using hollow carbon nanofibers”, Nanoscale, vol. 6, no. 17, pp. 10332-10339, 2014.
, “Enhanced electrocatalytic activity of PtRu/nitrogen and sulphur co-doped crumbled graphene in acid and alkaline media”, Journal of Colloid and Interface Science, vol. 590, pp. 154-163, 2021.
, “Enhanced electrocatalytic performance of functionalized carbon nanotube electrodes for oxygen reduction in proton exchange membrane fuel cells”, Physical Chemistry Chemical Physics, vol. 13, no. 21, pp. 10312-10317, 2011.
, “Enhanced proton conduction by post-synthetic covalent modification in a porous covalent framework”, Journal of Materials Chemistry A, vol. 5, no. 26, pp. 13659-13664, 2017.
, “Enhanced proton conductivity in amino acid based self-assembled non-porous hydrogen-bonded organic frameworks”, Chemical Communications, vol. 58, no. 40, pp. 5972-5975, 2022.
, “Ex-situ dispersion of core-shell nanoparticles of Cu-Pt on an in situ modified carbon surface and their enhanced electrocatalytic activities”, Chemical Communications, vol. 47, no. 13, pp. 3951-3953, 2011.
, “Facile construction of non-precious iron nitride-doped carbon nanofibers as cathode electrocatalysts for proton exchange membrane fuel cells”, Chemical Communications, vol. 47, no. 10, pp. 2910-2912, 2011.
, “Facile synthesis of CNT interconnected PVP-ZIF-8 derived hierarchically porous Zn/N co-doped carbon frameworks for oxygen reduction dagger”, Nanoscale, vol. 13, no. 12, pp. 6248-6258, 2021.
, “Fe2P4O12-carbon composite as a highly stable electrode material for electrochemical capacitors”, New Journal of Chemistry, vol. 43, no. 1, pp. 399-406, 2019.
, “Fe3+ stabilized 3D cross-linked glycine-melamine formaldehyde networks as precursor for highly efficient oxygen reduction catalyst in alkaline media”, Materials Letters, vol. 264, p. 127365, 2020.
, “Fe(III) phytate metallogel as a prototype anhydrous, intermediate temperature proton conductor”, Chemical Science, vol. 6, no. 1, pp. 603-607, 2015.
, “FeNx/FeSx-anchored carbon sheet-carbon nanotube composite electrocatalysts for oxygen reduction”, ACS Applied Nano Materials, vol. 3, no. 3, pp. 2234-2245, 2020.
, “From waste paper basket to solid state and Li-HEC ultracapacitor electrodes: a value added journey for shredded office paper”, Small, vol. 10, no. 21, pp. 4395-4402, 2014.
, “Glycine-induced electrodeposition of nanostructured cobalt hydroxide: a bifunctional catalyst for overall water splitting”, ChemSusChem, 2019.
, “Grafoil-scotch tape-derived highly conducting flexible substrate and its application as a supercapacitor electrode”, Nanoscale, vol. 9, no. 10, pp. 3593-3600, 2017.
, “Graphene enriched with pyrrolic coordination of the doped nitrogen as an efficient metal-free electrocatalyst for oxygen reduction”, Journal of Materials Chemistry, vol. 22, no. 44, pp. 23506-23513, 2012.
, “Graphene oxide sheathed ZIF-8 microcrystals: engineered precursors of nitrogen-doped porous carbon for efficient oxygen reduction reaction (ORR) electrocatalysis”, ACS Applied Materials & Interfaces, vol. 8, no. 43, pp. 29373-29382, 2016.
, “Graphene-modified electrodes for sensing doxorubicin hydrochloride in human plasma”, Analytical and Bioanalytical Chemistry, vol. 411, no. 8, pp. 1509-1516, 2019.
, “Hierarchical nanoflower arrays of Co9S8-Ni3S2 on nickel foam: a highly efficient binder-free electrocatalyst for overall water splitting”, Chemistry-A European Journal, vol. 26, no. 35, pp. 7900-7911, 2020.
, “High aspect ratio nanoscale multifunctional materials derived from hollow carbon nanofiber by polymer insertion and metal decoration”, Chemical Communications, vol. 46, no. 30, pp. 5590-5592, 2010.
, “High hydroxide conductivity in a chemically stable crystalline metal-organic framework containing a water-hydroxide supramolecular chain”, Chemical Communications, vol. 52, no. 54, pp. 8459-8462, 2016.
, “High pt utilization electrodes for polymer electrolyte membrane fuel cells by dispersing pt particles formed by a preprecipitation method on carbon ``polished'' with polypyrrole”, Journal of Physical Chemistry C, vol. 114, no. 34, pp. 14654-14661, 2010.
, “High-index faceted Au nanocrystals with highly controllable optical properties and electro-catalytic activity”, Nanoscale, vol. 8, no. 46, pp. 19224-19228, 2016.
, “High-level supercapacitive performance of chemically reduced graphene oxide”, Chem, vol. 3, no. 5, pp. 846-860, 2017.
, “Highly exposed and activity modulated sandwich type Pt thin layer catalyst with enhanced utilization”, Journal of Materials Chemistry, vol. 21, no. 47, pp. 19039-19048, 2011.
, “High-Performance flexible solid-state supercapacitor with an extended nanoregime interface through in situ polymer electrolyte generation”, ACS Applied Materials & Interfaces, vol. 8, no. 2, pp. 1233-1241, 2016.
, “High-performing PGM-free AEMFC cathodes from carbon-supported cobalt ferrite nanoparticles”, Catalysts, vol. 9, no. 3, p. 264, 2019.
, “High-voltage non-aqueous hybrid supercapacitor based on the N2200 polymer supported over multiwalled carbon nanotubes”, Nanoscale, vol. 13, no. 28, pp. 12314-12326, 2021.
, “Hydrogen-bonded organic frameworks (HOFs): a new class of porous crystalline proton-conducting materials”, Angewandte Chemie-International Edition, vol. 55, no. 36, pp. 10667-10671, 2016.
, “Hydrous RuO2-carbon nanofiber electrodes with high mass and electrode-specific capacitance for efficient energy storage”, Nanoscale, vol. 4, no. 3, pp. 890-896, 2012.
, “Imidazole-linked crystalline two-dimensional polymer with ultrahigh proton-conductivity”, Journal of the American Chemical Society, vol. 141, no. 38, pp. 14950-14954, 2019.
, “Improved performance of phosphonated carbon nanotube-polybenzimidazole composite membranes in proton exchange membrane fuel cells”, Journal of Materials Chemistry, vol. 21, no. 20, pp. 7223-7231, 2011.
, “In situ cross-linked nonaqueous polymer electrolyte for zinc-metal polymer batteries and hybrid supercapacitors”, Small, vol. 16, no. 35, p. 2002528, 2020.
, “In situ polymerization process: an essential design tool for lithium polymer batteries dagger”, Energy & Environmental Science, vol. 14, no. 5, pp. 2708-2788, 2021.
, “In situ preparation of ionomer as a tool for triple-phase boundary enhancement in 3D graphene supported Pt catalyst”, Advanced Sustainable Systems, vol. 5, no. 1, p. 2000125, 2021.
, “Influence of ice templating on oxygen reduction catalytic activity of metal-free heteroatom-doped mesoporous carbon derived from polypyrrole for zinc-air batteries”, Energy Technology, vol. 10, no. 12, 2022.
, “In-situ generated Mn3O4-reduced graphene oxide nanocomposite for oxygen reduction reaction and isolated reduced graphene oxide for supercapacitor applications”, Carbon, vol. 154, pp. 285-291, 2019.
, “Interconnected polyaniline nanostructures: enhanced interface for better supercapacitance retention”, Polymer, vol. 212, p. 123169, 2021.
, “Interlayer hydrogen-bonded covalent organic frameworks as high-performance supercapacitors”, Journal of the American Chemical Society, vol. 140, no. 35, pp. 10941-10945, 2018.
, “Iron Catalyzed Hydroformylation of Alkenes under Mild Conditions: Evidence of an Fe(II) Catalyzed Process”, Journal of the American Chemical Society, vol. 140, pp. 4430-4439, 2018.
, “Layer-separated distribution of nitrogen doped graphene by wrapping on carbon nitride tetrapods for enhanced oxygen reduction reactions in acidic medium”, Chemical Communications, vol. 50, no. 89, pp. 13769-13772, 2014.
, “Layer-separated MoS2 bearing reduced graphene oxide formed by an in situ intercalation-cum-anchoring route mediated by Co(OH)(2) as a Pt-free electrocatalyst for oxygen reduction”, Nanoscale, vol. 7, no. 40, pp. 16729-16736, 2015.
, “Lithium-assisted proton conduction at 150 degrees C in a microporous triazine-phenol polymer”, Advanced Materials Interfaces, vol. 2, no. 16, p. 1500301, 2015.
, “Low band gap benzimidazole COF supported Ni3N as highly active OER catalyst”, Advanced Energy Materials, vol. 6, no. 24, p. Article No:1601189, 2016.
, “Low surface energy plane exposed co3o4 nanocubes supported on nitrogen-doped graphene as an electrocatalyst for efficient water oxidation”, ACS Applied Materials & Interfaces, vol. 7, no. 1, pp. 442-451, 2015.
, “Low-overpotential electrocatalytic water splitting with noble-metal-free nanoparticles supported in a sp(3) n-rich flexible COF”, Advanced Energy Materials, vol. 6, no. 13, p. Article No. 1600110, 2016.
, “Magnetic reduced graphene oxide loaded hydrogels: highly versatile and efficient adsorbents for dyes and selective Cr(VI) ions removal”, Journal of Colloid and Interface Science, vol. 507, pp. 360-369, 2017.
, “Mechanochemically synthesized covalent organic framework as a proton-conducting solid electrolyte”, Journal of Materials Chemistry A, vol. 4, no. 7, pp. 2682-2690, 2016.
, “Melamine formaldehyde-metal organic gel interpenetrating polymer network derived intrinsic Fe-N-doped porous graphitic carbon electrocatalysts for oxygen reduction reaction”, New Journal of Chemistry , vol. 42, no. 23, pp. 18690-18701, 2018.