biblio
, “Carbon nanofiber with selectively decorated pt both on inner and outer walls as an efficient electrocatalyst for fuel cell applications”, Journal of Physical Chemistry C, vol. 113, no. 40, pp. 17572-17578, 2009.
, “Design of an "allsolid-state'' supercapacitor based on phosphoric acid doped polybenzimidazole (PBI) electrolyte”, Journal of Applied Electrochemistry, vol. 39, no. 7, pp. 1097-1103, 2009.
, “Domain size manipulation of perflouorinated polymer electrolytes by sulfonic acid-functionalized MWCNTs to enhance fuel cell performance”, Langmuir, vol. 25, no. 14, pp. 8299-8305, 2009.
, “Artificially designed membranes using phosphonated multiwall carbon nanotube-polybenzimidazole composites for polymer electrolyte fuel cells”, Journal of Physical Chemistry Letters, vol. 1, no. 14, pp. 2109-2113, 2010.
, “High aspect ratio nanoscale multifunctional materials derived from hollow carbon nanofiber by polymer insertion and metal decoration”, Chemical Communications, vol. 46, no. 30, pp. 5590-5592, 2010.
, “High pt utilization electrodes for polymer electrolyte membrane fuel cells by dispersing pt particles formed by a preprecipitation method on carbon ``polished'' with polypyrrole”, Journal of Physical Chemistry C, vol. 114, no. 34, pp. 14654-14661, 2010.
, “Pt-MoOx-carbon nanotube redox couple based electrocatalyst as a potential partner with polybenzimidazole membrane for high temperature polymer electrolyte membrane fuel cell applications”, Electrochimica Acta, vol. 55, no. 8, pp. 2878-2887, 2010.
, “Enhanced electrocatalytic performance of functionalized carbon nanotube electrodes for oxygen reduction in proton exchange membrane fuel cells”, Physical Chemistry Chemical Physics, vol. 13, no. 21, pp. 10312-10317, 2011.
, “Ex-situ dispersion of core-shell nanoparticles of Cu-Pt on an in situ modified carbon surface and their enhanced electrocatalytic activities”, Chemical Communications, vol. 47, no. 13, pp. 3951-3953, 2011.
, “Facile construction of non-precious iron nitride-doped carbon nanofibers as cathode electrocatalysts for proton exchange membrane fuel cells”, Chemical Communications, vol. 47, no. 10, pp. 2910-2912, 2011.
, “Highly exposed and activity modulated sandwich type Pt thin layer catalyst with enhanced utilization”, Journal of Materials Chemistry, vol. 21, no. 47, pp. 19039-19048, 2011.
, “Improved performance of phosphonated carbon nanotube-polybenzimidazole composite membranes in proton exchange membrane fuel cells”, Journal of Materials Chemistry, vol. 21, no. 20, pp. 7223-7231, 2011.
, “3D Hexaporous carbon assembled from single-layer graphene as high performance supercapacitor”, Chemsuschem, vol. 5, no. 11, pp. 2159-2164, 2012.
, “Activity modulated low platium content oxygen reduction electrocatalysts prepared by inducing nano-order dislocations on carbon nanofiber through N-2-doping”, Journal of Physical Chemistry C, vol. 116, no. 28, pp. 14754-14763, 2012.
, “Efficient oxygen reduction electrocatalyst from graphene by simultaneously generating pores and nitrogen doped active sites”, Journal of Materials Chemistry, vol. 22, no. 45, pp. 23799-23805, 2012.
, “Graphene enriched with pyrrolic coordination of the doped nitrogen as an efficient metal-free electrocatalyst for oxygen reduction”, Journal of Materials Chemistry, vol. 22, no. 44, pp. 23506-23513, 2012.
, “Hydrous RuO2-carbon nanofiber electrodes with high mass and electrode-specific capacitance for efficient energy storage”, Nanoscale, vol. 4, no. 3, pp. 890-896, 2012.
, “One-dimensional confinement of a nanosized metal organic framework in carbon nanofibers for improved gas adsorption”, Chemical Communications, vol. 48, no. 14, pp. 2009-2011, 2012.
, “Polybenzimidazole mediated N-doping along the inner and outer surfaces of a carbon nanofiber and its oxygen reduction properties”, Journal of Materials Chemistry, vol. 22, no. 44, pp. 23668-23679, 2012.
, “Tuning the functionality of a carbon nanofiber-Pt-RuO2 system from charge storage to electrocatalysis”, Inorganic Chemistry, vol. 51, no. 18, pp. 9766-9774, 2012.
, “Tuning the performance of low-Pt polymer electrolyte membrane fuel cell electrodes derived from Fe2O3@Pt/C core-shell catalyst prepared by an in situ anchoring strategy”, Journal of Physical Chemistry C, vol. 116, no. 13, pp. 7318-7326, 2012.
, “1-Dimensional confinement of porous polyethylenedioxythiophene using carbon nanofibers as a solid template: an efficient charge storage material with improved capacitance retention and cycle stability”, RSC Advances, vol. 3, no. 29, pp. 11877-11887, 2013.
, “3-Dimensionally self-assembled single crystalline platinum nanostructures on few-layer graphene as an efficient oxygen reduction electrocatalyst”, RSC Advances, vol. 3, no. 19, pp. 6913-6921, 2013.
, “Carbon nanofiber-RuO2-poly(benzimidazole) ternary hybrids for improved supercapacitor performance”, RSC Advances, vol. 3, no. 7, pp. 2428-2436, 2013.
, “Design of a high performance thin all-solid-state supercapacitor mimicking the active interface of its liquid-state counterpart”, ACS Applied Materials & Interfaces, vol. 5, no. 24, pp. 13397-13404, 2013.
, “Effect of the viscosity of poly(benzimidazole) on the performance of a multifunctional electrocatalyst with an ideal interfacial structure”, Journal of Materials Chemistry A, vol. 1, no. 13, pp. 4265-4276, 2013.
, “Porous carbons from nonporous MOFs: influence of ligand characteristics on intrinsic properties of end carbon”, Crystal Growth & Design, vol. 13, no. 10, pp. 4195-4199, 2013.
, “Porous-organic-framework-templated nitrogen-rich porous carbon as a more proficient electrocatalyst than Pt/C for the electrochemical reduction of oxygen”, Chemistry-A European Journal, vol. 19, no. 3, pp. 974-980, 2013.
, “Redox-mediated synthesis of functionalised graphene: a strategy towards 2D multifunctional electrocatalysts for energy conversion applications”, ChemPlusChem, vol. 78, no. 10, pp. 1296-1303, 2013.
, “Zeolitic imidazolate framework (ZIF)-derived, hollow-core, nitrogen-doped carbon nanostructures for oxygen-reduction reactions in PEFCs”, Chemistry-A European Journal, vol. 19, no. 28, pp. 9335-9342, 2013.
, “Activated nitrogen doped graphene shell towards electrochemical oxygen reduction reaction by its encapsulation on Au nanoparticle (Au@N-Gr) in water-in-oil ``nanoreactors''”, Journal of Materials Chemistry A, vol. 2, no. 5, pp. 1383-1390, 2014.
, “All-solid-state-supercapacitor and a process for the fabrication thereof”, U.S. Patent PCT/IN2014/0002332014.
, “Covalent organic framework-cadmium sulfide hybrid as a prototype photocatalyst for visible-light-driven hydrogen production”, Chemistry A-European Journal, vol. 20, no. 48, pp. 15961-15965, 2014.
, “Distinctive PdCl2-mediated transformation of Fe-based metallogels into metal-organic frameworks”, Crystal Growth & Design, vol. 14, no. 7, pp. 3434-3437, 2014.
, “Electrochemically grown nanoporous MnO2 nanowalls on a porous carbon substrate with enhanced capacitance through faster ionic and electrical mobility”, Chemical Communications, vol. 50, no. 54, pp. 7188-7190, 2014.
, “Electrodeposited polyethylenedioxythiophene with infiltrated gel electrolyte interface: a close contest of an all-solid-state supercapacitor with its liquid-state counterpart”, Nanoscale, vol. 6, no. 11, pp. 5944-5952, 2014.
, “Enhanced catalytic activity of polyethylenedioxythiophene towards tri-iodide reduction in DSSCs via 1-dimensional alignment using hollow carbon nanofibers”, Nanoscale, vol. 6, no. 17, pp. 10332-10339, 2014.
, “From waste paper basket to solid state and Li-HEC ultracapacitor electrodes: a value added journey for shredded office paper”, Small, vol. 10, no. 21, pp. 4395-4402, 2014.
, “Layer-separated distribution of nitrogen doped graphene by wrapping on carbon nitride tetrapods for enhanced oxygen reduction reactions in acidic medium”, Chemical Communications, vol. 50, no. 89, pp. 13769-13772, 2014.
, “Nanoporous graphene by quantum dots removal from graphene and its conversion to a potential oxygen reduction electrocatalyst via nitrogen doping”, Energy & Environmental Science, vol. 7, no. 7, pp. 1059-1067, 2014.
, “Nitrogen-doped graphene interpenetrated 3D Ni-nanocages: efficient and stable water-to-dioxygen electrocatalysts”, Nanoscale, vol. 6, no. 21, pp. 13179-13187, 2014.
, “Post modification of MOF derived carbon via g-C3N4 entrapment for an efficient metal-free oxygen reduction reaction”, Chemical Communications, vol. 50, no. 25, pp. 3363-3366, 2014.
, “Post-synthetically modified porous covalent framework (PCF) for high proton conduction”, Acta Crystallographica A‐Foundation and Advances, vol. 70, p. C1156, 2014.
, “Structure and dynamics of benzyl-NX3 (X = Me, Et) trifluoromethanesulfonate ionic liquids”, Journal of Physical Chemistry B, vol. 118, no. 7, pp. 1831-1838, 2014.
, “Synthesis of an efficient heteroatom-doped carbon electro-catalyst for oxygen reduction reaction by pyrolysis of protein-rich pulse flour cooked with SiO2 nanoparticles”, Physical Chemistry Chemical Physics, vol. 16, no. 9, pp. 4251-4259, 2014.
, “Two-in-one: inherent anhydrous and water-assisted high proton conduction in a 3D metal-organic framework”, Angewandte Chemie-International Edition, vol. 53, no. 10, pp. 2638-2642, 2014.
, “3D polyaniline porous layer anchored pillared graphene sheets: enhanced interface joined with high conductivity for better charge storage applications”, ACS Applied Materials & Interfaces, vol. 7, no. 14, pp. 7661-7669, 2015.
, “Can enantiomer ligands produce structurally distinct homochiral MOFs?”, CrystEngComm, vol. 17, no. 42, pp. 8202-8206, 2015.
, “Carbon nanohorn-derived graphene nanotubes as a platinum-free fuel cell cathode”, ACS Applied Materials & Interfaces, vol. 7, no. 43, pp. 24256-24264, 2015.
, “Coherent fusion of water array and protonated amine in a metal-sulfate-based coordination polymer for proton conduction”, Inorganic Chemistry, vol. 54, no. 11, pp. 5366-5371, 2015.
, “CoSe2 supported on nitrogen-doped carbon nanohorns as a methanol-tolerant cathode for air-breathing microlaminar flow fuel cells”, Chemelectrochem, vol. 2, no. 9, pp. 1339-1345, 2015.
, “Cu-Pt nanocage with 3-D electrocatalytic surface as an efficient oxygen reduction electrocatalyst for a primary Zn-air battery”, ACS Catalysis, vol. 5, no. 3, pp. 1445-1452, 2015.
, “Effect of b site coordination environment in the ORR activity in disordered brownmillerites Ba2In2-xCexO5+delta”, ACS Applied Materials & Interfaces, vol. 7, no. 5, pp. 3041-3049, 2015.
, “Electrochemical preparation of nitrogen-doped graphene quantum dots and their size-dependent electrocatalytic activity for oxygen reduction”, Bulletin of Materials Science, vol. 38, no. 2, pp. 435-442, 2015.
, “Fe(III) phytate metallogel as a prototype anhydrous, intermediate temperature proton conductor”, Chemical Science, vol. 6, no. 1, pp. 603-607, 2015.
, “Layer-separated MoS2 bearing reduced graphene oxide formed by an in situ intercalation-cum-anchoring route mediated by Co(OH)(2) as a Pt-free electrocatalyst for oxygen reduction”, Nanoscale, vol. 7, no. 40, pp. 16729-16736, 2015.
, “Lithium-assisted proton conduction at 150 degrees C in a microporous triazine-phenol polymer”, Advanced Materials Interfaces, vol. 2, no. 16, p. 1500301, 2015.
, “Low surface energy plane exposed co3o4 nanocubes supported on nitrogen-doped graphene as an electrocatalyst for efficient water oxidation”, ACS Applied Materials & Interfaces, vol. 7, no. 1, pp. 442-451, 2015.
, “Nanocrystalline Fe-Fe2O3 particle-deposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction”, Nanoscale, vol. 7, no. 47, pp. 20117-20125, 2015.
, “Nitrogen-induced surface area and conductivity modulation of carbon nanohorn and its function as an efficient metal-free oxygen reduction electrocatalyst for anion-exchange membrane fuel cells”, SMALL, vol. 11, no. 3, pp. 352-360, 2015.
, “Surface-modified single wall carbon nanohorn as an effective electrocatalyst for platinum-free fuel cell cathodes”, Journal of Materials Chemistry A, vol. 3, no. 8, pp. 4361-4367, 2015.
, “Surface-tuned Co3O4 nanoparticles dispersed on nitrogen-doped graphene as an efficient cathode electrocatalyst for mechanical rechargeable zinc-air battery application”, ACS Applied Materials & Interfaces, vol. 7, no. 38, pp. 21138-21149, 2015.
, “Switching closed-shell to open-shell phenalenyl: toward designing electroactive materials”, Journal of the American Chemical Society, vol. 137, no. 18, pp. 5955-5960, 2015.
, “1000-fold enhancement in proton conductivity of a MOF using post-synthetically anchored proton transporters”, Scientific Reports, vol. 6, p. 32489, 2016.
, “1D alignment of PEDOT in a buckypaper for high-performance solid supercapacitors”, Chemelectrochem, vol. 3, no. 9, pp. 1329-1336, 2016.
, “Cobalt-modified covalent organic framework as a robust wateroxidation electrocatalyst”, Chemistry of Materials, vol. 28, no. 12, pp. 4375-4379, 2016.
, “Conjugated porous polymers as precursors for electrocatalysts and storage electrode materials”, Chemical Communications, vol. 52, no. 2, pp. 316-318, 2016.
, “Coordination polymers of Fe(III) and Al(III) ions with TCA ligand: distinctive fluorescence, CO2 uptake, redox-activity and oxygen evolution reaction”, Dalton Transactions, vol. 45, no. 16, pp. 6901-6908, 2016.
, “Graphene oxide sheathed ZIF-8 microcrystals: engineered precursors of nitrogen-doped porous carbon for efficient oxygen reduction reaction (ORR) electrocatalysis”, ACS Applied Materials & Interfaces, vol. 8, no. 43, pp. 29373-29382, 2016.
, “High hydroxide conductivity in a chemically stable crystalline metal-organic framework containing a water-hydroxide supramolecular chain”, Chemical Communications, vol. 52, no. 54, pp. 8459-8462, 2016.
, “High-index faceted Au nanocrystals with highly controllable optical properties and electro-catalytic activity”, Nanoscale, vol. 8, no. 46, pp. 19224-19228, 2016.
, “High-Performance flexible solid-state supercapacitor with an extended nanoregime interface through in situ polymer electrolyte generation”, ACS Applied Materials & Interfaces, vol. 8, no. 2, pp. 1233-1241, 2016.
, “Hydrogen-bonded organic frameworks (HOFs): a new class of porous crystalline proton-conducting materials”, Angewandte Chemie-International Edition, vol. 55, no. 36, pp. 10667-10671, 2016.
, “Low band gap benzimidazole COF supported Ni3N as highly active OER catalyst”, Advanced Energy Materials, vol. 6, no. 24, p. Article No:1601189, 2016.
, “Low-overpotential electrocatalytic water splitting with noble-metal-free nanoparticles supported in a sp(3) n-rich flexible COF”, Advanced Energy Materials, vol. 6, no. 13, p. Article No. 1600110, 2016.
, “Mechanochemically synthesized covalent organic framework as a proton-conducting solid electrolyte”, Journal of Materials Chemistry A, vol. 4, no. 7, pp. 2682-2690, 2016.
, “Nanoporous graphene enriched with Fe/Co-N active sites as a promising oxygen reduction electrocatalyst for anion exchange membrane fuel cells”, Advanced Functional Materials, vol. 26, no. 13, pp. 2150-2162, 2016.
, “Nitrogen and sulphur co-doped crumbled graphene for the oxygen reduction reaction with improved activity and stability in acidic medium”, Journal of Materials Chemistry A, vol. 4, no. 16, pp. 6014-6020, 2016.
, “Pb2+-N bonding chemistry: recycling of polyaniline-pb nanocrystals waste for generating high-performance supercapacitor electrodes”, Journal of Physical Chemistry C, vol. 120, no. 2, pp. 911-918, 2016.
, “Pt- and TCO-free flexible cathode for DSSC from highly conducting and flexible PEDOT paper prepared via in situ interfacial polymerization”, ACS Applied Materials & Interfaces, vol. 8, no. 1, pp. 553-562, 2016.
, “Reduced graphene oxide modified electrodes for sensitive sensing of gliadin in food samples”, ACS Sensors, vol. 1, no. 12, pp. 1462-1470, 2016.
, “Strategic Preparation of Efficient and Durable NiCo Alloy Supported N-Doped Porous Graphene as an Oxygen Evolution Electrocatalyst: A Theoretical and Experimental Investigation”, Advanced Materials Interfaces, vol. 3, no. 20, p. 1600532, 2016.
, “Understanding the electron transfer process in ZnO-naphthol azobenzoic acid composites from photophysical characterisation”, Physical Chemistry Chemical Physics, vol. 18, no. 32, pp. 22179-22187, 2016.
, “Unravelling the mechanism of electrochemical degradation of PANI in supercapacitors: achieving a feasible solution”, Chemelectrochem, vol. 3, no. 6, pp. 933-942, 2016.
, “Valorization of coffee bean waste: a coffee bean waste derived multifunctional catalyst for photocatalytic hydrogen production and electrocatalytic oxygen reduction reactions”, RSC Advances, vol. 6, no. 85, pp. 82103-82111, 2016.
, “Vitro and in silico antifungal efficacy of nitrogen- doped carbon nanohorn ( NCNH) against rhizoctonia solani”, Journal of Biomolecular Structure & Dynamics, vol. 34, no. 1, pp. 152-162, 2016.
, “Activity tuning of cobalt ferrite nanoparticles anchored on N-doped reduced graphene oxide as a potential oxygen reduction electrocatalyst by Zn substitution in the spinel matrix”, Chemistry Select, vol. 2, no. 26, pp. 7845-7853, 2017.
, “Chitosan intercalated metal organic gel as a green precursor of fe entrenched and fe distributed N-doped mesoporous graphitic carbon for oxygen reduction reaction”, Chemistryselect, vol. 2, no. 28, pp. 8762-8770, 2017.
, “On demand electrochemical release of drugs from porous reduced graphene oxide modified flexible electrodes”, Journal of Materials Chemistry B, vol. 5, no. 32, pp. 6557-6565, 2017.
, “Enhanced proton conduction by post-synthetic covalent modification in a porous covalent framework”, Journal of Materials Chemistry A, vol. 5, no. 26, pp. 13659-13664, 2017.
, “Grafoil-scotch tape-derived highly conducting flexible substrate and its application as a supercapacitor electrode”, Nanoscale, vol. 9, no. 10, pp. 3593-3600, 2017.
, “High-level supercapacitive performance of chemically reduced graphene oxide”, Chem, vol. 3, no. 5, pp. 846-860, 2017.
, “Magnetic reduced graphene oxide loaded hydrogels: highly versatile and efficient adsorbents for dyes and selective Cr(VI) ions removal”, Journal of Colloid and Interface Science, vol. 507, pp. 360-369, 2017.
, “Nanocrystalline Fe-Fe2O3 particledeposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction”, Nanoscale, vol. 9, no. 35, pp. 13341-13342, 2017.
, “Nitrogen-doped graphene anchored with mixed growth patterns of CuPt alloy nanoparticles as a highly efficient and durable electrocatalyst for the oxygen reduction reaction in an alkaline medium”, Nanoscale, vol. 9, no. 26, pp. 9009-9017, 2017.
, “Nitrogen-doped graphene with a three-dimensional architecture assisted by carbon nitride tetrapods as an efficient metal-free electrocatalyst for hydrogen evolution”, Chemelectrochem, vol. 4, no. 10, pp. 2643-2652, 2017.
, “NiZn double hydroxide nanosheet-anchored nitrogen-doped graphene enriched with the gamma-NiOOH phase as an activity modulated water oxidation electrocatalyst”, Nanoscale, vol. 9, no. 34, pp. 12590-12600, 2017.
, “ Porous reduced graphene oxide modified electrodes for the analysis of protein aggregation. part 1: lysozyme aggregation at pH 2 and 7.4”, Electrochimica Acta, vol. 254, pp. 375-383, 2017.
, “Proton conduction in a hydrogen-bonded complex of copper(II)-bipyridine glycoluril nitrate”, Dalton Transactions, vol. 46, no. 21, pp. 6968-6974, 2017.
, “Selective isolation and eradication of E. coli associated with urinary tract infections using anti-fimbrial modified magnetic reduced graphene oxide nanoheaters”, Journal of Materials Chemistry B, vol. 5, no. 40, pp. 8133-8142, 2017.