biblio
, “Biogenic green synthesis of monodispersed gum kondagogu (Cochlospermum gossypium) iron nanocomposite material and its application in germination and growth of mung bean (Vigna radiata) as a plant model”, IET Nanobiotechnology, vol. 10, no. 3, pp. 141-146, 2016.
, “Boron nitride and oxide supported on dendritic fibrous nanosilica for catalytic oxidative dehydrogenation of propane”, ACS Sustainable Chemistry & Engineering, vol. 8, no. 43, pp. 16124-16135, 2020.
, “Bulk and surface structure characterization of nanoscopic silver doped lanthanum chromites”, Applied Surface Science, vol. 264, pp. 574-580, 2013.
, “Characterization of MoSe2 thin film deposited at room temperature from solution phase”, Journal of Crystal Growth, vol. 311, no. 1, pp. 15-19, 2008.
, “Construction of two-component chemically reactive supramolecular assemblies-acyl migration reactions in cocrystals of napthalene-2,3-diol and its diesters”, ChemPlusChem, vol. 86, no. 8, pp. 1128-1134, 2021.
, “Co-precipitation technique to prepare BaTa2O6”, Ceramics International, vol. 33, no. 2, pp. 297-299, 2007.
, “Co-precipitation technique to prepare BiNbO4 powders”, Ceramics International, vol. 34, no. 6, pp. 1565-1567, 2008.
, “Co-precipitation technique to prepare BiTaO4 powders”, Materials Letters, vol. 62, no. 3, pp. 501-503, 2008.
, “Coprecipitation technique to prepare LiTaO3 powders”, Materials Letters, vol. 60, no. 8, pp. 1047-1048, 2006.
, “Coprecipitation technique to prepare Sr0.5Ba0.5Nb2O6”, Bulletin of Materials Science, vol. 29, no. 3, pp. 221-223, 2006.
, “Coprecipitation technique to prepare ZnM2O6 powders”, Bulletin of Materials Science, vol. 28, no. 3, pp. 205-207, 2005.
, “Design, synthesis, structural characterization by IR, 1H, 13C, 15N, 2D-NMR, X-ray diffraction and evaluation of a new class of phenylaminoacetic acid benzylidene hydrazines as pfENR inhibitors”, Chemical Biology & Drug Design, vol. 81, no. 6, pp. 715-729, 2013.
, “Engineering molecular topology: A pseudopeptidic macrocyclic figure-eight motif”, European Journal of Organic Chemistry, no. 7, pp. 1120-1124, 2017.
, “Epitaxially grown zinc-blende structured Mn doped ZnO nanoshell on ZnS nanoparticles”, Materials Research Bulletin, vol. 44, no. 2, pp. 339-344, 2009.
, “Fluorinated metal-organic frameworks: advantageous for higher H-2 and CO2 adsorption or not?”, Chemistry-A European Journal, vol. 18, no. 2, pp. 688-694, 2012.
, “Fungus mediated synthesis of biomedically important cerium oxide nanoparticles”, Materials Research Bulletin, vol. 48, no. 10, pp. 4134-4138, 2013.
, “Green synthesis-mediated iron oxide nanoparticles using sphagneticola trilobata (L.) for antibacterial and anticancer assessment”, Pharmacognosy Magazine, vol. 18, no. 80, pp. 953-961, 2022.
, “Identification of molecular crystals capable of undergoing an acyl-transfer reaction based on intermolecular interactions in the crystal lattice”, Chemistry-A European Journal, vol. 19, no. 38, pp. 12867-12874, 2013.
, “Liquid phase oxidation of alkanes using Cu/Co-perchlorophthalocyanine immobilized MCM-41 under mild reaction conditions”, Applied Catalysis A-General, vol. 297, no. 2, pp. 220-230, 2006.
, “Low temperature route to prepare LaFeO3 and LaCoO3”, Materials Letters, vol. 61, no. 10, pp. 2030-2032, 2007.
, “Low temperature route to prepare LaMnO3”, Materials Letters, vol. 60, no. 9-10, pp. 1213-1214, 2006.
, “Low temperature synthesis and characterization of BiNbO4 powders”, Materials Characterization, vol. 59, no. 8, pp. 1083-1087, 2008.
, “Low temperature synthesis of MgTa2O6 powders”, Materials Letters, vol. 59, no. 29-30, pp. 3926-3928, 2005.
, “Low temperature synthesis of SrNb2O6 and SrTa2O6 using hydroxide precursor”, Materials Letters, vol. 62, no. 6-7, pp. 892-894, 2008.
, “Low voltage varistor ceramics based on SnO2”, Bulletin of Materials Science, vol. 30, no. 6, pp. 583-586, 2007.
, “Magnetic and dielectric properties of nanophase manganese-substituted lithium ferrite”, Journal of Magnetism and Magnetic Materials, vol. 321, no. 19, pp. 3270-3273, 2009.
, “Magnetic, dielectric and complex impedance spectroscopic studies of nanocrystalline Cr substituted Li-ferrite”, Journal of Magnetism and Magnetic Materials, vol. 322, no. 18, pp. 2629-2633, 2010.
, “Microwave-assisted synthesis and humidity sensing of nanostructured alpha-Fe2O3”, Materials Research Bulletin, vol. 44, no. 5, pp. 1179-1182, 2009.
, “Negative thermal expansion in silicalite-1 and zirconium silicalite-1 having MFI structure”, Materials Research Bulletin, vol. 41, no. 7, pp. 1392-1402, 2006.
, “Novel hydroxide precursors for low temperature synthesis of selected ternary oxides”, Materials Research Bulletin, vol. 43, no. 7, pp. 1842-1849, 2008.
, “Novel solar light driven photocatalyst, zinc indium vanadate for photodegradation of aqueous phenol”, Materials Research Bulletin, vol. 46, no. 5, pp. 635-638, 2011.
, “Novel technique to prepare LiNbO3 at low temperature”, Materials Letter, vol. 61, no. 3, pp. 765-766, 2007.
, “Origin of high room temperature ferromagnetic moment of nanocrystalline multiferroic BiFeO3”, Applied Physics Letters, vol. 94, no. 18, p. 182507, 2009.
, “Phase evolution of NiTiO3 prepared by coprecipitation method”, Materials Letters, vol. 60, no. 15, pp. 1791-1792, 2006.
, “Photocatalytic degradation of methylene blue on Sn-doped titania nanoparticles synthesized by solution combustion route”, Materials Research Bulletin, vol. 76, pp. 264-272, 2016.
, “Photoelectrochemical properties of electrochemically deposited CdIn2S4 thin films”, Journal of Physics and Chemistry of Solids, vol. 67, no. 11, pp. 2331-2336, 2006.
, “Photoluminescent tetrahedral d(10)-metal Schiff base complexes exhibiting highly ordered mesomorphism”, Polyhedron, vol. 105, pp. 150-158, 2016.
, “Preparation and characterization of bioceramic nanocomposites based on hydroxyapatite (HA) and carboxymethyl cellulose (CMC)”, Macromolecular Research, vol. 18, no. 12, pp. 1160-1167, 2010.
, “Preparation and characterization of CuInSe2 thin films by chemical bath deposition technique”, Journal of Alloys and Compounds, vol. 500, no. 1, pp. 78-81, 2010.
, “Preparation and electrochemical characterization of lithium cobalt oxide nanoparticles by modified sol-gel method”, Materials Research Bulletin, vol. 43, no. 8-9, pp. 2497-2503, 2008.
, “Preparation of nanocrystalline LiNbO3 by citrate gel method”, Materials Letters, vol. 59, no. 19-20, pp. 2476-2478, 2005.
, “Preparation of nanocrystalline MgNb2O6 by citrate gel method”, Materials Letters, vol. 59, no. 17, pp. 2146-2148, 2005.
, “Preparation of ultrafine LiTaO3 powders by citrate gel method”, Bulletin of Materials Science, vol. 28, no. 5, pp. 391-393, 2005.
, “Six-membered NHC stabilized monomeric zinc complexes”, European Journal of Inorganic Chemistry, vol. 26, no. 21, p. e202300167, 2023.
, “Stabilization of gamma-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers. part II. polypropylene matrix”, Polymer Degradation and Stability, vol. 92, no. 2, pp. 299-309, 2007.
, “Structural characterization of azoic dye hosted layered double hydroxides”, Zeitschrift fur Kristallographie, vol. 224, no. 5-6, pp. 282-286, 2009.
, “Structural evolutions of hydrothermally prepared mesostructured MCM-48 silica using differently manufactured amorphous silica powders”, Journal of Non-Crystalline Solids, vol. 353, no. 2, pp. 194-199, 2007.
, “On the structural, magnetic and electrical properties of sol-gel derived nanosized cobalt ferrite”, Journal of Alloys and Compounds, vol. 485, no. 1-2, pp. 711-717, 2009.
, “Surface texture and specific adsorption sites of sol-gel synthesized anatase TiO2 nanoparticles”, Materials Research Bulletin, vol. 45, no. 10, pp. 1470-1475, 2010.
, “Syntheses and single crystal X-ray diffraction studies of hydroxynicotinic acid based complexes involving supramolecular interactions”, Polyhedron, vol. 133, pp. 222-230, 2017.
, “Synthesis and characterization of CoCrxFe2-xO4 nanoparticles”, Journal of Alloys and Compounds, vol. 485, no. 1-2, pp. 798-801, 2009.
, “Synthesis and characterization of nanocrystalline zinc substituted nickel ferrites”, Journal of Alloys and Compounds, vol. 496, no. 1-2, pp. 256-260, 2010.
, “Synthesis and characterization of nickel selenide thin films deposited by chemical method”, Journal of Alloys and Compounds, vol. 490, no. 1-2, pp. 228-231, 2010.
, “Synthesis, characterization and effect of sintering temperature on magnetic properties of MgNi ferrite prepared by co-precipitation method”, Journal of Alloys and Compounds, vol. 475, no. 1-2, pp. 926-929, 2009.
, “Synthesis, characterization and electrochemical investigations of mixed-ligand copper(II)-organic supramolecular frameworks”, Journal of Molecular Structure, vol. 1147, pp. 549-557, 2017.
, “Synthesis of bismuth oxide nanoparticles at 100 degrees C”, Materials Letters, vol. 59, no. 19-20, pp. 2523-2525, 2005.
, “Synthesis of bismuth titanate by the urea method”, Materials Letters, vol. 59, no. 4, pp. 514-516, 2005.
, “Synthesis of fine particles of ZnO at 100 degrees C”, Materials Letters, vol. 59, no. 7, pp. 779-781, 2005.
, “Synthesis of LSMO at low temperature by novel hydroxide precursor technique”, Materials Letters, vol. 62, no. 3, pp. 527-529, 2008.
, “Synthesis of MgNb2O6 by coprecipitation”, Materials Research Bulletin, vol. 41, no. 7, pp. 1353-1356, 2006.
, “Synthesis of nanocrystalline Mn3O4 at 100 degrees C”, Materials Research Bulletin, vol. 40, no. 4, pp. 605-609, 2005.
, “Thermal stability of the Mobil Five type metallosilicate molecular sieves - an in situ high, temperature X-ray diffraction study”, Materials Research Bulletin, vol. 42, no. 5, pp. 851-860, 2007.
, “TiO2 ceramic varistor modified with tantalum and barium”, Materials Science and Engineering B-Solid State Materials for Advanced Technology, vol. 123, no. 1, pp. 50-52, 2005.