biblio
, “Copolyesters based on poly(butylene terephthalate)s containing cyclohexyl and cyclopentyl ring: Effect of molecular structure on thermal and crystallization behavior”, Macromolecules, vol. 40, no. 19, pp. 6906-6915, 2007.
, “Co-precipitation technique to prepare BaTa2O6”, Ceramics International, vol. 33, no. 2, pp. 297-299, 2007.
, “Coprecipitation technique to prepare CoTa2O6 and CoNb2O6”, Materials Letter, vol. 61, no. 11-12, pp. 2127-2129, 2007.
, “Coprecipitation technique to prepare NiNb2O6”, Materials Letter, vol. 61, no. 11-12, pp. 2354-2355, 2007.
, “Cross- and axial-peak intensities in 2D-SLF experiments based on cross-polarization - the role of the initial density matrix”, Journal of Magnetic Resonance, vol. 185, no. 2, pp. 308-317, 2007.
, “Cyclic voltammetry, electrochemical impedance and ex situ X-ray diffraction studies of electrochemical insertion and deinsertion of lithium ion into nanostructured organic-inorganic poly(3,4-ethylenedioxythiophene) based hybrids”, Journal of Electroanalytical Chemistry, vol. 603, no. 2, pp. 287-296, 2007.
, “Development of a soft sensor for a batch distillation column using support vector regression techniques”, Chemical Engineering Research & Design , vol. 85, no. A2, pp. 283-287, 2007.
, “Direct hydrothermal synthesis of mesoporous Sn-SBA-15 materials under weak acidic conditions”, Microporous and Mesoporous Materials, vol. 100, no. 1-3, pp. 210-226, 2007.
, “Direct hydrothermal synthesis of mesoporous Sn-SBA-15 materials under weak acidic conditions”, Microporous and Mesoporous Materials, vol. 100, no. 1-3, pp. 210-226, 2007.
, “Effect of surface chemistry of Fe-Ni nanoparticles on mechanistic pathways of azo dye degradation”, Environmental Science & Technology, vol. 41, no. 21, pp. 7437-7443, 2007.
, “Efficient synthesis of fused 1,2,3-triazolo-delta-lactams using huisgen [3+2] dipolar cycloaddition ``click-chemistry'' in water”, Chemistry Letters, vol. 36, no. 5, pp. 592-593, 2007.
, “Encapsulation of endoglucanase using a biopolymer Gum arabic for its controlled release”, Bioresource Technology, vol. 98, no. 2, pp. 368-372, 2007.
, “Encapsulation of endoglucanase using a biopolymer Gum arabic for its controlled release”, Bioresource Technology, vol. 98, no. 2, pp. 368-372, 2007.
, “Energy analysis of field emitted electrons from a ZnO tetrapod”, Applied Physics Letters, vol. 90, no. 16, p. Article No. 162102, 2007.
, “Enforcing periodic secondary structures in hybrid peptides: a novel hybrid foldamer containing periodic gamma-turn motifs”, Journal of Organic Chemistry, vol. 72, no. 2, pp. 636-639, 2007.
, “Environmentally benign catalytic hydroformylation-oxidation route for naproxen synthesis”, Industrial & Engineering Chemistry Research, vol. 46, no. 25, pp. 8480-8489, 2007.
, “Expeditious assembly of 3,4-benzannulated 8-oxabicyclo[3.2.1]octane systems by [2+2+2] alkyne cyclotrimerisation: Total synthesis of (-)-bruguierol A”, European Journal of Organic Chemistry, no. 33, pp. 5483-5486, 2007.
, “Fabrication of MEMS composite-polymer gas sensor arrays for electronic nose”, Indian Journal of Pure & Applied Physics, vol. 45, no. 4, pp. 321-325, 2007.
, “Fault diagnosis using dynamic time warping”, in Pattern Recognition and Machine Intelligence, Proceedings, Heidelberger Platz 3, D-14197 Berlin, Germany, 2007, vol. 4815, pp. 57-66.
, “Field emission investigations of RuO2-doped SnO2 wires”, Applied Surface Science, vol. 253, no. 23, pp. 9159-9163, 2007.
, “Fungus-based synthesis of chemically difficult-to-synthesize multifunctional nanoparticles of CuAlO2”, Advanced Materials, vol. 19, no. 20, p. 3295+, 2007.
, “Glycine-assisted enhancement of 1,4-beta-D-xylan xylanohydrolase activity at alkaline pH with a pH optimum shift”, Biological Chemistry, vol. 388, no. 1, pp. 61-65, 2007.
, “High-temperature, polymer-graphite hybrid composites for bipolar plates: effect of processing conditions on electrical properties”, Journal of Power Sources, vol. 163, no. 2, pp. 702-707, 2007.
, “High-temperature, polymer-graphite hybrid composites for bipolar plates: effect of processing conditions on electrical properties”, Journal of Power Sources, vol. 163, no. 2, pp. 702-707, 2007.
, “Hydrodynamics and liquid phase residence time distribution in mesh microreactor”, Chemical Engineering Science, vol. 62, no. 24, pp. 7484-7493, 2007.
, “Hydrodynamics of bubble column reactors at high gas velocity: experiments and computational fluid dynamics (CFD) Simulations”, Industrial & Engineering Chemistry Research, vol. 46, no. 25, pp. 8431-8447, 2007.
, “Hydrodynamics of bubble column reactors at high gas velocity: experiments and computational fluid dynamics (CFD) Simulations”, Industrial & Engineering Chemistry Research, vol. 46, no. 25, pp. 8431-8447, 2007.
, “Immobilization of Ntn hydrolases on APTES fuctionalized SBA-15”, in From Zeolites to Porous Mof Materials: the 40th Anniversary of International Zeolite Conference, Proceedings of the 15th International Zeolite Conference, Sara Burgerhartstraat 25, Po Box 211, 1000 AE Amsterdam, Netherlands, 2007, vol. 170, pp. 1891-1898.
, “Improve polyethylene process control and product quality - using artificial intelligence-based sensors can improve costs”, Hydrocarbon Processing , vol. 86, no. 3, p. 53+, 2007.
, “Influence of surfactant on ZnO varistors”, Ceramics International, vol. 33, no. 2, pp. 289-291, 2007.
, “Interface and defect structures in YBa(2)Cu(3)O(7-delta) and Nb : SrTiO(3) heterojunction”, Journal of Physics D-Applied Physics, vol. 40, no. 1, pp. 187-191, 2007.
, “Kinetics of reductive alkylation of p-phenylenediamine with methyl ethyl ketone using 3% Pt/Al2O3 catalyst in a slurry reactor”, Industrial & Engineering Chemistry Research, vol. 46, no. 10, pp. 3243-3254, 2007.
, “Low temperature route to prepare LaFeO3 and LaCoO3”, Materials Letters, vol. 61, no. 10, pp. 2030-2032, 2007.
, “Low temperature synthesis and NOx sensing properties of nanostructured Al-doped ZnO”, Sensors and Actuators B-Chemical, vol. 126, no. 2, pp. 382-386, 2007.
, “Low voltage varistor ceramics based on SnO2”, Bulletin of Materials Science, vol. 30, no. 6, pp. 583-586, 2007.
, “Macroporous beads for lipase immobilization: kinetic resolution of a racemic drug intermediate”, Journal of Bioactive and Compatible Polymers, vol. 22, no. 2, pp. 174-194, 2007.
, “Modeling of bubble column slurry reactor for reductive alkylation of p-phenylenediamine”, Chemical Engineering Science, vol. 62, no. 24, pp. 7290-7304, 2007.
, “Modeling of bubble column slurry reactor for reductive alkylation of p-phenylenediamine”, Chemical Engineering Science, vol. 62, no. 24, pp. 7290-7304, 2007.
, “Multiutility sophorolipids as nanoparticle capping agents: synthesis of stable and water dispersible Co nanoparticles”, Langmuir, vol. 23, no. 23, pp. 11409-11412, 2007.
, “NCL-7, a novel all silica analog of polymorph B rich member of BEA family: synthesis and characterization”, Microporous and Mesoporous Materials, vol. 101, no. 1-2, pp. 108-114, 2007.
, “Novel technique to prepare LiNbO3 at low temperature”, Materials Letter, vol. 61, no. 3, pp. 765-766, 2007.
, “Organocatalytic activation of TMSCN by basic ammonium salts for efficient cyanation of aldehydes and imines”, Tetrahedron Letters, vol. 48, no. 40, pp. 7211-7214, 2007.
, “Phosphotungstic acid as an efficient solid catalyst for intramolecular rearrangement of benzyl phenyl ether to 2-benzyl phenol”, Catalysis Communications, vol. 8, no. 2, pp. 139-144, 2007.
, “Photodegradation of ethylene/propylene/polar monomers, Co-, and terpolymers. II. prepared by Ni catalyst systems”, Journal of Applied Polymer Science, vol. 104, no. 3, pp. 1783-1791, 2007.
, “Photo-oxidation of EPDM/layered double hydroxides composites: influence of layered hydroxides and stabilizers”, Express Polymer Letters, vol. 1, no. 11, pp. 748-754, 2007.
, “Polyethylene waxes: catalytic synthesis by ti-biphenolates”, Journal of Macromolecular Science Part A‐Pure and Applied Chemistry, vol. 44, no. 7-9, pp. 977-987, 2007.
, “Preface: CAMURE-6 & ISMR-5 symposium in Pune, India”, Industrial & Engineering Chemical Research, vol. 46, no. 25, p. 8291, 2007.
, “Preparation and evaluation of cellulose acetate butyrate and poly(ethylene oxide) blend microspheres for gastroretentive floating delivery of repaglinide”, Journal of Applied Polymer Science, vol. 105, no. 5, pp. 2764-2771, 2007.
, “Preparation of nanocrystalline ferroelectric CaBi4Ti4O15 by citrate gel method”, Ceramics International, vol. 33, no. 4, pp. 569-571, 2007.
, “Protecting group directed ring-closing metathesis (RCM): the first total synthesis of an anti-malarial nonenolide”, Tetrahedron Letters, vol. 48, no. 14, pp. 2621-2625, 2007.
, “Regio- and stereoselective synthesis of beta-amino alcohols over titanosilicate molecular sieves”, Applied Catalysis A-General, vol. 330, pp. 145-151, 2007.
, “Removal of AS(III) and AS (V) from contaminated water sources by sorption onto novel pei-attached poly(hipe) beads", paper presented at international conference on ?role of analytical chemistry in nuclear technology?”, in Role of Analytical Chemistry in Nuclear Technology, BARC, Mumbai, India, 2007.
, “Role of ionic diffusion in polymer gel mediated growth (PMG) technique for the synthesis of nanoparticulate fillers”, Materials Chemistry and Physics, vol. 105, no. 2-3, pp. 348-353, 2007.
, “Rotary Cement Kiln Simulator (RoCKS): integrated modeling of pre-heater, calciner, kiln and clinker cooler”, Chemical Engineering Science, vol. 62, no. 9, pp. 2590-2607, 2007.
, “[SbW9O33]-based polyoxometalate combined with a phase transfer catalyst: A highly effective catalyst system for selective oxidation of alcohols with H2O2, and spectroscopic investigation”, Journal of Molecular Catalysis A-Chemical, vol. 262, no. 1-2, pp. 52-58, 2007.
, “Singlejet fluidized beds: experiments and CFD simulations with glass and polypropylene particles”, Chemical Engineering Science, vol. 62, no. 1-2, pp. 167-183, 2007.
, “Spectroscopic and catalytic properties of SBA-15 molecular sieves functionalized with acidic and basic moieties”, Microporous and Mesoporous Materials, vol. 105, no. 1-2, pp. 170-180, 2007.
, “Stabilization of gamma-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers. part II. polypropylene matrix”, Polymer Degradation and Stability, vol. 92, no. 2, pp. 299-309, 2007.
, “Stereoselective hydrogenation of tert-butylphenols over charcoal-supported rhodium catalyst in supercritical carbon dioxide solvent”, Journal of Catalysis, vol. 252, no. 1, pp. 57-68, 2007.
, “Steric control in pd-mediated cycloisomerization of sugar alkynols: documentation of a rare allylic epimerization”, Tetrahedron Letters, vol. 48, no. 27, pp. 4771-4774, 2007.
, “Sulfonamide- and hydrazine-based palladium catalysts: stable and efficient catalysts for C-C coupling reactions in aqueous medium”, Journal of Molecular Catalysis A-Chemical, vol. 269, no. 1-2, pp. 218-224, 2007.
, “Surface-state-mediated electron transfer at nanostructured ZnO multipod/electrolyte interfaces”, Journal of Physical Chemistry C, vol. 111, no. 35, pp. 13092-13102, 2007.
, “Synthesis and characterization of hindered amine light stabilizers based on end functionalization of polypropylene”, Journal of Applied Polymer Science, vol. 104, no. 3, pp. 1596-1602, 2007.
, “Synthesis and characterization of hindered amine light stabilizers based on end functionalization of polypropylene”, Journal of Applied Polymer Science, vol. 104, no. 3, pp. 1596-1602, 2007.
, “Synthesis and characterization of NCL-5, NCL-6 and NCL-7: new zeolites enriched with polymorph B of the BEA family”, Microporous and Mesoporous Materials, vol. 105, no. 1-2, pp. 82-88, 2007.
, “Synthesis and characterization of novel polyurethanes based on 4,4 `-[1,4-phenylenedi-diazene-2,1-dlyl] bis(2-carboxyphenol) and 4,4 `-[1,4-phenylenedi-diazene-2,1-diyl] bis(2-chlorophenol) hard segments”, Reactive & Functional Polymers, vol. 67, no. 6, pp. 503-514, 2007.
, “Synthesis and evaluation of 4/5-hydroxy-2,3-diaryl(substituted)-cyclopent-2-en-1-ones as cis-restricted analogues of combretastatin A-4 as novel anticancer agents”, Journal of Medicinal Chemistry, vol. 50, no. 8, pp. 1744-1753, 2007.
, “Synthesis, characterization, and acoustic properties of new soluble polyurethanes based on 2,2 `-[1,4-phenylenebis(nitrilomethylylidene)diphenol and 2,2 `-[4,4 `-methylene-di-2-methylphenylene-1,1 `-bis(nitrilomethylylidene)]diphenol”, Journal of Applied Polymer Science, vol. 106, no. 1, pp. 299-308, 2007.
, “Synthesis, characterization, and performance evaluation of polymeric hindered amine light stabilizers (HALS) in EPDM”, E-Polymers, p. Article No. 038, 2007.
, “Synthesis, NMR, X-ray crystallography and bioactivity of some alpha-aminophosphonates”, Arkivoc, no. Part No. 13, pp. 133-141, 2007.
, “Synthesis, NMR, X-ray crystallography and bioactivity of some alpha-aminophosphonates”, Arkivoc, no. Part No. 13, pp. 133-141, 2007.
, “Synthesis of La0.7Sr0.3MnO3 at 800 degrees C using citrate gel method”, Ceramics International, vol. 33, no. 6, pp. 1129-1132, 2007.
, “Synthesis of La0.7Sr0.3MnO3 at 800 degrees C using citrate gel method”, Ceramics International, vol. 33, no. 6, pp. 1129-1132, 2007.
, “Synthesis of L-ido-configured six- and seven-membered carba-sugars”, Synthesis-Stuttgart, no. 4, pp. 523-528, 2007.
, “Synthesis of the C19-C34 segment of amphidinolide C”, Synlett, no. 4, pp. 567-570, 2007.
, “Synthesis of tinidazole by condensation-oxidation sequence using MoO3/SiO2 bifunctional catalyst”, Catalysis Communications, vol. 8, no. 10, pp. 1550-1555, 2007.
, “Thermal stability of the Mobil Five type metallosilicate molecular sieves - an in situ high, temperature X-ray diffraction study”, Materials Research Bulletin, vol. 42, no. 5, pp. 851-860, 2007.
, “Total syntheses of schulzeines B and C”, Journal of Organic Chemistry, vol. 72, no. 17, pp. 6591-6594, 2007.
, “Total synthesis of pachastrissamine (jaspine B) enantiomers from D-glucose”, Tetrahedron Letters, vol. 48, no. 2, pp. 265-268, 2007.
, “Two new eudesmanolides from sphaeranthus indicus (Linn)”, Indian Journal of Chemistry Section B-Organic Chemistry Including Medicinal Chemistry, vol. 46, no. 2, pp. 379-381, 2007.
, “Varistors based on Ta-doped TiO2”, Ceramics International, vol. 33, no. 2, pp. 301-303, 2007.
, “3-(2,4-Dichlorophenyl)-1-(4-methoxyphenyl)prop-2-en-1-one”, Acta Crystallographica Section E-Structure Reports Online, vol. 62, pp. O4773-O4774, 2006.
, “3-(2,4-Dichlorophenyl)-1-(4-methoxyphenyl)prop-2-en-1-one”, Acta Crystallographica Section E-Structure Reports Online, vol. 62, pp. O4773-O4774, 2006.
, “3-(3-bromophenyl)-1-(4-methoxyphenyl)-prop-2-en-1-one”, Acta Crystallographica Section E-Structure Reports Online, vol. 62, pp. O4798-O4799, 2006.
, “3-(3-bromophenyl)-1-(4-methoxyphenyl)-prop-2-en-1-one”, Acta Crystallographica Section E-Structure Reports Online, vol. 62, pp. O4798-O4799, 2006.
, “[6+3] cycloaddition of pentafulvenes with 3-oxidopyrylium betaine: a novel methodology toward the synthesis of 5-8 fused oxabridged cyclooctanoids”, Tetrahedron, vol. 62, no. 25, pp. 5952-5961, 2006.
, “Adsorption of methanol on Si(100)/SiO(2)and mesoporous SBA-15”, Colloids and Surfaces A-Physicochemical and Engineering Aspects, vol. 287, pp. 51-58, 2006.
, “Amino functionalized novel cholic acid derivatives induce HIV-1 replication and syncytia formation in T cells”, Journal of Medicinal Chemistry, vol. 49, no. 8, pp. 2652-2655, 2006.
, “Biochemical characterization of a low molecular weight aspartic protease inhibitor from thermo-tolerant bacillus licheniformis: kinetic interactions with pepsin”, Biochimica et Biophysica Acta-General Subjects, vol. 1760, no. 12, pp. 1845-1856, 2006.
, “Biodegradation of gamma-sterilised biomedical polyolefins under composting and fungal culture environments”, Polymer Degradation and Stability, vol. 91, no. 5, pp. 1105-1116, 2006.
, “CFD simulation of gas-liquid stirred vessel: VC, S33, and L33 flow regimes”, AICHE Journal, vol. 52, no. 5, pp. 1654-1672, 2006.
, “CFD simulation of mixing in tall gas-liquid stirred vessel: role of local flow patterns”, Chemical Engineering Science, vol. 61, no. 9, pp. 2921-2929, 2006.
, “CFD simulation of shortstopping runaway reactions in vessels agitated with impellers and jets”, Journal of Loss Prevention in the Process Industries, vol. 19, no. 6, pp. 570-581, 2006.
, “Chemical methods to synthesize FeTiO3 powders”, Materials Letters, vol. 60, no. 11, pp. 1425-1427, 2006.
, “Chemo-, regio- and stereo-selective aerial oxidation of limonene to the endo-1,2-epoxide over Mn(Salen)-sulfonated SBA-15”, Applied Catalysis A-General, vol. 309, no. 1, pp. 144-154, 2006.
, “Clay-mediated selective hydrolysis of 5 `-O-acetyl-2 `,3 `-isopropylidene/cyclohexylidene nucleosides”, Synthetic Communications, vol. 36, no. 16, pp. 2321-2327, 2006.
, “Comparative assessment of downstream processing options for lactic acid”, Separation and Purification Technology, vol. 52, no. 1, pp. 1-17, 2006.
, “Comparison of flow structures in spacer-filled flat and annular channels”, Desalination, vol. 191, no. 1-3, pp. 236-244, 2006.
, “Computational fluid dynamics simulation of the solid suspension in a stirred slurry reactor”, Industrial & Engineering Chemistry Research, vol. 45, no. 12, pp. 4416-4428, 2006.
, “Concise asymmetric route to the antibiotic macrolides patulolide A and pyrenophorin”, Tetrahedron Letters, vol. 47, no. 37, pp. 6623-6626, 2006.

