Acetone vapour sensing characteristics of undoped and Zn, Ce doped SnO2 thick film gas sensor
Title | Acetone vapour sensing characteristics of undoped and Zn, Ce doped SnO2 thick film gas sensor |
Publication Type | Journal Article |
Year of Publication | 2013 |
Authors | Bagal, LK, Patil, JY, Bagal, KN, Mulla, IS, Suryavanshi, SS |
Journal | Materials Research Innovations |
Volume | 17 |
Issue | 2 |
Pagination | 98-105 |
Date Published | APR |
ISSN | 1432-8917 |
Keywords | Gas, Screen printing, Sensor, SnO2 |
Abstract | The nanocrystalline materials of zinc and ceria doped tin oxide [(Zn+Ce)-SnO2] powders were synthesised by coprecipitation method and investigated for their sensing properties towards liquid petroleum gas (LPG), ethanol, ammonia and acetone vapour. The crystal structure and phase of the as synthesised and sintered powders were characterised by X-ray diffractometer and the microstructure by scanning electron microscopy. All the doped and undoped SnO2 compositions revealed single phase solid solution formation. Transmission electron microscope results indicated that well crystallised (Zn+Ce) doped SnO2 particles of size similar to 7 nm were obtained at the annealing temperature of 650 degrees C. The reduction in grain size of the metal oxide is a key factor to enhance the gas sensing properties. The doping of zinc, ceria in SnO2 has reduced the grain size and improved the gas response. The results of gas sensing measurements showed that the thick films deposited on alumina substrates using screen printing technique exhibited high response to acetone at an operating temperature of 300 degrees C. Further, the selectivity of the sensor towards acetone with respect to other reducing gases (LPG, ethanol and ammonia) was studied. |
DOI | 10.1179/1433075X12Y.0000000035 |
Type of Journal (Indian or Foreign) | Foreign |
Impact Factor (IF) | 0.473 |