Safe water and technology initiative for water disinfection: application of natural plant derived materials
| Title | Safe water and technology initiative for water disinfection: application of natural plant derived materials |
| Publication Type | Journal Article |
| Year of Publication | 2021 |
| Authors | Mane, MB, Bhandari, VM, Ranade, VV |
| Journal | Journal of Water Process Engineering |
| Volume | 43 |
| Pagination | 102280 |
| Date Published | OCT |
| Type of Article | Article |
| ISSN | 2214-7144 |
| Keywords | Cavitation, Disinfection, Natural oil, Plant extract, Water treatment |
| Abstract | Safe drinking water is the necessity of life. The present study reveals use of natural resources such as plant extracts and natural oils for water disinfection. Differences between oil and water soluble additives were highlighted for plant extracts and insoluble natural oils. A hybrid hydrodynamic cavitation process was quite effective in both the cases and high rates of disinfection were achieved. Studies were reported using oils (ginger, turmeric, lavender, tulsi) and rhizome derived plant extracts such as ginger, turmeric and mango ginger, as additives in process intensification (0.1% v/V). A vortex based cavitation device (vortex diode, nominal capacity 1 m3/h) was used with pressure drop of 1 bar. A high disinfection of 96% and 88% was obtained in 15 min for ginger oil and mango ginger extract respectively as compared to 44% using cavitation alone. Acoustic cavitation gave 94% and 30% disinfection with and without additive-mango ginger extract. The FTIR analyses before and after cavitation, with ginger additive, showed no by-products formation and indicated gingerol as active component in disinfection. The per-pass disinfection values were also higher, up to 5 times than cavitation alone. Hybrid hydrodynamic cavitation using natural plant derived materials can offer a promising technology alternative in water disinfection. |
| DOI | 10.1016/j.jwpe.2021.102280 |
| Type of Journal (Indian or Foreign) | Foreign |
| Impact Factor (IF) | 5.485 |
Divison category:
Chemical Engineering & Process Development
Add new comment