3D printing of poly(lactic acid) (PLA) blends has been attempted to resolve issues such as inherent brittleness and slow crystallization rate of PLA. However, a persistent challenge remains in the form of phase separation or gradual migration of the blended soft polymer or plasticizers. To simultaneously enhance the miscibility of the blends and toughness of 3D-printed parts, a triblock copolymer PLA-PEG-PLA was synthesized and blended with PLA in varying proportions (5, 10, 15, and 20 wt %). Blending only 10-20 wt % low molecular weight PLA-PEG-PLA into PLA yielded a miscible blend that showed a 45-fold increase in elongation at break and a 23-fold enhancement in toughness over neat PLA. Scanning electron microscopy (SEM) images of fractured cross sections revealed a brittle to ductile transition in 3D-printed PLA/PLA-PEG-PLA samples. Isothermal crystallization studies and data analysis using the Avrami equation showed an enhancement in the crystal growth rate and overall rate of crystallization. The blends achieved half of their crystallinity in approximately 3 min, a significant improvement over the 9 min required by PLA alone. This underscores the efficiency of our approach. This was also evident in the spherulite growth of 3D-printed PLA and mPLA blends when examined using polarized optical microscopy (POM). To the best of our knowledge, this is the first report exploring the use of blends that include PLA and low molecular weight PLA-PEG-PLA triblock copolymers for 3D printing applications.

Foreign