<?xml version="1.0" encoding="UTF-8"?><xml><records><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Deshpande, A. C.</style></author><author><style face="normal" font="default" size="100%">Koinkar, Pankaj M.</style></author><author><style face="normal" font="default" size="100%">Ashtaputre, S. S.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Gosavi, S. W.</style></author><author><style face="normal" font="default" size="100%">Godbole, P. D.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author><author><style face="normal" font="default" size="100%">Kulkarni, S. K.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Field emission from oriented tin oxide rods</style></title><secondary-title><style face="normal" font="default" size="100%">Thin Solid Films</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">microstructures</style></keyword><keyword><style  face="normal" font="default" size="100%">scanning electron microscopy</style></keyword><keyword><style  face="normal" font="default" size="100%">tin oxide</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2006</style></year><pub-dates><date><style  face="normal" font="default" size="100%">DEC</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">4</style></number><publisher><style face="normal" font="default" size="100%">ELSEVIER SCIENCE SA</style></publisher><pub-location><style face="normal" font="default" size="100%">PO BOX 564, 1001 LAUSANNE, SWITZERLAND</style></pub-location><volume><style face="normal" font="default" size="100%">515</style></volume><pages><style face="normal" font="default" size="100%">1450-1454</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Tin oxide (SnO2) films were grown on silicon substrates by a wet chemical route. It was found from scanning electron microscopy investigations that oriented SnO2 rods normal to the substrates were obtained. Field emission studies were carried out in diode configuration in an all metal ultra high vacuum chamber at a base pressure similar to 1.33 x 10(-8) mbar. The `onset' field required to draw 0.1 mu A/cm(2) current density from the emitter cathode was found to be similar to 3.4 V/mu m for SnO2 rods. The field emission current and applied field follows the Folwer-Nordheim relationship in low field regime. The observed results indicate that the field emission characteristics of chemically grown SnO2 structures are comparable to the vapor grown nanostructures. (c) 2006 Elsevier B.V. All rights reserved.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">4</style></issue><work-type><style face="normal" font="default" size="100%">Article</style></work-type><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">1.761</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Bhise, Ashok B.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Ramgir, Niranjan S.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Mulla, Imtiaz S.</style></author><author><style face="normal" font="default" size="100%">Pillai, Vijayamohanan K.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Field emission investigations of RuO2-doped SnO2 wires</style></title><secondary-title><style face="normal" font="default" size="100%">Applied Surface Science</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">doped semiconductor</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">field enhancement factor</style></keyword><keyword><style  face="normal" font="default" size="100%">RuO2</style></keyword><keyword><style  face="normal" font="default" size="100%">SnO2</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2007</style></year><pub-dates><date><style  face="normal" font="default" size="100%">SEP</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">23</style></number><publisher><style face="normal" font="default" size="100%">ELSEVIER SCIENCE BV</style></publisher><pub-location><style face="normal" font="default" size="100%">PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS</style></pub-location><volume><style face="normal" font="default" size="100%">253</style></volume><pages><style face="normal" font="default" size="100%">9159-9163</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Field emission studies of a bunch and a single isolated RuO2:SnO2 wire have been performed. A current density of 5.73 x 10(4) A/cm(2) is drawn from the single wire emitter at an applied field of 8.46 x 10(4) V/mu m. Nonlinearity in the Fowler-Nordheim (F-N) plot has been observed and explained on the basis of electron emission from both the conduction and the valence bands of the semiconductor. The current stability recorded at the preset value of 1.5 LA is observed to be good. Overall the high emission current density, good stability and mechanically robust nature of the RuO2:SnO2 wires offer advantages as field emitters for many potential applications. (c) 2007 Elsevier B.V. All rights reserved.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">23</style></issue><work-type><style face="normal" font="default" size="100%">Article</style></work-type><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">3.15</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Bhise, Ashok B.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Sathe, Bhaskar R.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Mulla, Imtiaz S.</style></author><author><style face="normal" font="default" size="100%">Pillai, Vijayamohanan K.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Field emission investigation of single Fe-doped SnO2 wire</style></title><secondary-title><style face="normal" font="default" size="100%">Solid State Sciences</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Current stability</style></keyword><keyword><style  face="normal" font="default" size="100%">Fe doped</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">SnO2</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2009</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JUN</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">6</style></number><publisher><style face="normal" font="default" size="100%">ELSEVIER SCIENCE BV</style></publisher><pub-location><style face="normal" font="default" size="100%">PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS</style></pub-location><volume><style face="normal" font="default" size="100%">11</style></volume><pages><style face="normal" font="default" size="100%">1114-1117</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Tin oxide submicronwires doped with Fe element were prepared by the thermal evaporation method. Morphological and structural characterizations revealed wires with sub micron size and crystalline in nature. The field electron emission from the single Fe:SnO2 wire was carried out in conventional field emission microscope. The Fowler-Nordheim plot obtained from I-V characteristics of the wire showed a linear behavior typical that of metal. The field enhancement factor estimated from the slope of the F-N plot is 7455 cm(-1), indicating that the field emission is from nanometric features of the emitter. A current density of 10 A/cm(2) has been obtained at an applied field of 4.845 x 10(3) V/mu m. The field emission current-time record at a current level of 1 mu A for more than 3 h duration is promising for various field emissions based applications. (C) 2009 Published by Elsevier Masson SAS.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">6</style></issue><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">1.828</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Navale, Shalaka C.</style></author><author><style face="normal" font="default" size="100%">Sheini, Farid Jamali</style></author><author><style face="normal" font="default" size="100%">Patil, Sandip S.</style></author><author><style face="normal" font="default" size="100%">Mulla, Imtiaz S.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Gosavi, Suresh W.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Field emission properties of Al-doped ZnO nanostructures</style></title><secondary-title><style face="normal" font="default" size="100%">Journal of Nano Research</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Fowler-Nordheim plots</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanostructures</style></keyword><keyword><style  face="normal" font="default" size="100%">ZnO</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2009</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JAN</style></date></pub-dates></dates><publisher><style face="normal" font="default" size="100%">TRANS TECH PUBLICATIONS LTD</style></publisher><pub-location><style face="normal" font="default" size="100%">LAUBISRUTISTR 24, STAFA-ZUERICH, CH-8712, SWITZERLAND</style></pub-location><volume><style face="normal" font="default" size="100%">5</style></volume><pages><style face="normal" font="default" size="100%">231-237</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Field emission from Al-doped ZnO nanostrcutures has been investigated in planar diode configuration under ultra high vacuum conditions. The Al-doped ZnO nanostructures were synthesized by co-precipitation method with varying aluminium concentrations. The as- synthesized product was characterized by x-ray diffraction, scanning electron microscope and energy dispersive x-ray analysis. The threshold field required to draw a current density of similar to 1 mu A/cm(2) was observed to be similar to 2.0 V/mu m and similar to 2.3 V/mu m for Al-doped ZnO nanostructures synthesized with aluminium concentrations of 1% and 3%, respectively. The Fowler- Nordheim (F-N) plots for both the specimens exhibit non-linear behaviour, which is observed to be specimen dependent. The nonlinearity observed in the F-N plots has been interpreted on the basis of the theory of electron emission from semiconductor emitters. The field enhancement factors, estimated from the slope of the F-N plots, are found to be similar to 9.3 x 10(3) and 3.9 x 10(3) for 1% and 3% Al-doped ZnO emitters, respectively. The high values of the field enhancement factor Suggest that the emission is from the nanostructures. The emission current stability measured at the preset value of similar to 2 mu A over a period of more than three hours is found to be fairly stable. The results indicate use of Al-doped ZnO nanostructures as promising emitters for field emission based devices.&lt;/p&gt;</style></abstract><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">0.492</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Bhise, Ashok B.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Sathe, B.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Mulla, Imtiaz S.</style></author><author><style face="normal" font="default" size="100%">Pillai, Vijayamohanan K.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Fabrication of In-doped SnO2 nanowire arrays and its field emission investigations</style></title><secondary-title><style face="normal" font="default" size="100%">Journal of Experimental Nanoscience</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">cold cathodes</style></keyword><keyword><style  face="normal" font="default" size="100%">device</style></keyword><keyword><style  face="normal" font="default" size="100%">Doping</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanowires</style></keyword><keyword><style  face="normal" font="default" size="100%">SnO2</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2010</style></year><pub-dates><date><style  face="normal" font="default" size="100%">DEC</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">6</style></number><publisher><style face="normal" font="default" size="100%">TAYLOR &amp; FRANCIS LTD</style></publisher><pub-location><style face="normal" font="default" size="100%">4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND</style></pub-location><volume><style face="normal" font="default" size="100%">5</style></volume><pages><style face="normal" font="default" size="100%">PII 931283663</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;The field emission of In-doped SnO2 wire array has been performed in parallel plate diode configuration. A maximum current density of 60 mu A/cm2 is drawn from the emitter at an applied field of 4 V/mu m. The nonlinearity in the Fowler-Nordheim plot, characteristics of semiconductor emitter has been observed and explained on the basis of electron emission from both the conduction and the valence bands. The current stability recorded at a preset value of 1 mu A is observed to be good. The high emission current density, good current stability and mechanically robust nature of the wires offer unprecedented advantages as promising cold cathodes for many potential applications based on field emission.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">6</style></issue><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">0.955</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Al-Tabbakh, Ahmed A.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author><author><style face="normal" font="default" size="100%">Mulla, Imtiaz S.</style></author><author><style face="normal" font="default" size="100%">Pillai, Vijayamohanan K.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Fowler-nordheim plot behavior and mechanism of field electron emission from ZnO tetrapod structures	</style></title><secondary-title><style face="normal" font="default" size="100%">ACS Nano</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Fowler-Nordheim plot</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanostructures</style></keyword><keyword><style  face="normal" font="default" size="100%">nonlinearity</style></keyword><keyword><style  face="normal" font="default" size="100%">ZnO</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2010</style></year><pub-dates><date><style  face="normal" font="default" size="100%">OCT</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">10</style></number><publisher><style face="normal" font="default" size="100%">AMER CHEMICAL SOC</style></publisher><pub-location><style face="normal" font="default" size="100%">1155 16TH ST, NW, WASHINGTON, DC 20036 USA</style></pub-location><volume><style face="normal" font="default" size="100%">4</style></volume><pages><style face="normal" font="default" size="100%">5585-5590</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Field emission measurements of current-voltage characteristics are reported for tetrapod structures of ZnO. The nonlinear Fowler-Nordheim (FN) plot is analyzed according to a model of calculation based on saturation of conduction band current and predominance of valence band current at high-field values. The simulated FN plot exhibits similar features to those observed experimentally. The model of calculation suggests that the slope variation of the FN plot, in the high-field and low-field regions, does not depend on the magnitude of saturation. Instead, it is a characteristic of the energy band structure and voltage-to-barrier-field conversion factor of the emitting material.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">10</style></issue><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">9.855</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Kakade, Bhalchandra A.</style></author><author><style face="normal" font="default" size="100%">Pillai, Vijayamohanan K.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Chavan, Padmakar G.</style></author><author><style face="normal" font="default" size="100%">Sheini, Farid J.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">High current density, low threshold field emission from functionalized carbon nanotube bucky paper</style></title><secondary-title><style face="normal" font="default" size="100%">Applied Physics Letters</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Carbon nanotubes</style></keyword><keyword><style  face="normal" font="default" size="100%">current density</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">fullerenes</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2010</style></year><pub-dates><date><style  face="normal" font="default" size="100%">AUG</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">7</style></number><publisher><style face="normal" font="default" size="100%">AMER INST PHYSICS</style></publisher><pub-location><style face="normal" font="default" size="100%">CIRCULATION &amp; FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA</style></pub-location><volume><style face="normal" font="default" size="100%">97</style></volume><pages><style face="normal" font="default" size="100%">073102</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Field emission studies of bucky paper of multiwalled carbon nanotubes (MWNTs), prepared after microwave (MW) assisted acid functionalization are reported along with a comparison with that of ``as-grown'' sample. MW treated bucky papers reveal an interesting linear field emission behavior in Fowler-Nordheim plot. The field emission currents at preset value are found to be remarkably stable over a period of more than 3 h sustaining current densities of 4.9 mA/cm(2) and 8.5 mA/cm(2) for ``as-grown'' and functionalized sample, respectively. The enhancement in the field emission due to functionalization has been discussed in terms of tip opening and defect induced charge transport caused by intershell and intertubular interaction. (C) 2010 American Institute of Physics. [doi:10.1063/1.3479049]&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">7</style></issue><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">3.820</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Jamali-Sheini, Farid</style></author><author><style face="normal" font="default" size="100%">Patil, K. R.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Synthesis of Cu-ZnO and C-ZnO nanoneedle arrays on zinc foil by low temperature oxidation route: effect of buffer layers on growth, optical and field emission properties</style></title><secondary-title><style face="normal" font="default" size="100%">Applied Surface Science</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Buffer layer</style></keyword><keyword><style  face="normal" font="default" size="100%">Carbon</style></keyword><keyword><style  face="normal" font="default" size="100%">Copper</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanoneedle</style></keyword><keyword><style  face="normal" font="default" size="100%">ZnO</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2011</style></year><pub-dates><date><style  face="normal" font="default" size="100%">AUG</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">20</style></number><publisher><style face="normal" font="default" size="100%">ELSEVIER SCIENCE BV</style></publisher><pub-location><style face="normal" font="default" size="100%">PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS</style></pub-location><volume><style face="normal" font="default" size="100%">257</style></volume><pages><style face="normal" font="default" size="100%">8366-8372</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Different densities of ZnO nanoneedle films have been prepared by pre-coated zinc foils with thin layer of copper and carbon followed by thermal oxidation at 400 degrees C in air. The X-ray diffraction patterns show well defined peaks, which could be indexed to the wurtzite hexagonal phase of ZnO. The scanning electron microscope images clearly reveal formation of ZnO needles on the entire substrate surface. The X-ray photoelectron spectroscopy studies indicate that Cu and C ions are incorporated into the ZnO lattice. Photoluminescence studies evaluate different emission bands originated from different defect mechanism. From the field emission studies, the threshold field, required to draw emission current density of similar to 100 mu A/cm(2), is observed to be 2.25 V/mu m and 1.57 V/mu m for annealed zinc foil pre-coated with copper and carbon, respectively. The annealed film with copper layer exhibits good emission current stability at the pre-set value of similar to 100 mu A over a duration of 4 h. The results show that buffer layer is an important factor to control the growth rate, resulting in different density of ZnO needles, which leads to field emission properties. This method may have potential in fabrication of electron sources for high current density applications. (C) 2011 Elsevier B. V. All rights reserved.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">20</style></issue><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">2.103
</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Chavan, Padmakar G.</style></author><author><style face="normal" font="default" size="100%">Kashid, Ranjit V.</style></author><author><style face="normal" font="default" size="100%">Badhade, Satish S.</style></author><author><style face="normal" font="default" size="100%">Mulla, Imtiaz S.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">CdS nanowires: ultra-long growth and enhanced field emission properties</style></title><secondary-title><style face="normal" font="default" size="100%">Vaccum</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Current stability</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">synthesis</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2014</style></year><pub-dates><date><style  face="normal" font="default" size="100%">MAR</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">SI</style></number><publisher><style face="normal" font="default" size="100%">PERGAMON-ELSEVIER SCIENCE LTD</style></publisher><pub-location><style face="normal" font="default" size="100%">THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND</style></pub-location><volume><style face="normal" font="default" size="100%">101</style></volume><pages><style face="normal" font="default" size="100%">38-45</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Here, we report the synthesis of ultra-long CdS nanowires with aspect ratio similar to 8 x 10(4) by simple route of thermal evaporation technique. A change in the vertical arrangement of quartz boats leads in to the synthesis of ultra-long CdS nanovvires via high degree of condensation. This technique is seen to be cost effective and easy. The growth of the nanowires is found to be increased very rapidly from few micrometers to few millimeters. The possible reason for the growth of the ultra-long CdS nanowires is discussed in detail. The turn-on field defined for the current density of similar to 0.1 mu A/cm(2) has been found to be similar to 1.4, 1.45, 1 and 0.17 V/mu m for specimen A, B, C and D (specimens A-D, synthesized by variation in synthesis parameters) respectively. The turn-on field of the specimen D (similar to 0.17 V/mu m) is found to be quite superior than the value reported for other CdS nanoforms which is very remarkable. Simple way of bulk fabrication leads to the low turn-on value which indicates a possible use of the present emitter in the micro/nanoelectronics devices. (C) 2013 Elsevier Ltd. All rights reserved.&lt;/p&gt;</style></abstract><work-type><style face="normal" font="default" size="100%">Article</style></work-type><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">1.69</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Rout, Chandra Sekhar</style></author><author><style face="normal" font="default" size="100%">Khare, Ruchita T.</style></author><author><style face="normal" font="default" size="100%">Kashid, Ranjit V.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Lanzillo, Nicholas A.</style></author><author><style face="normal" font="default" size="100%">Washington, Morris</style></author><author><style face="normal" font="default" size="100%">Nayak, Saroj K.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Metallic few-layer flowerlike VS2 nanosheets as field emitters</style></title><secondary-title><style face="normal" font="default" size="100%">European Journal of Inorganic Chemistry</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Density functional calculations</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Layered compounds</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanostructures</style></keyword><keyword><style  face="normal" font="default" size="100%">Sulfur</style></keyword><keyword><style  face="normal" font="default" size="100%">Vanadium</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2014</style></year><pub-dates><date><style  face="normal" font="default" size="100%">NOV</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">31</style></number><publisher><style face="normal" font="default" size="100%">WILEY-V C H VERLAG GMBH</style></publisher><pub-location><style face="normal" font="default" size="100%">BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY</style></pub-location><pages><style face="normal" font="default" size="100%">5331-5336</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;We report first-principles DFT calculations of the single-layer VS2 work function, the experimental synthesis of flower-like few-layer-thick VS2 nanosheets by a simple one-step hydrothermal method, and the investigation of their field emission properties. The turn-on field required to draw emission current densities of 1 and 10 mu A/cm(2) were 4 and 5.01 V/mu m, respectively. The observed turn-on field values are attributed to the high field enhancement factor (ca. 2500), which is due to presence of sharp protrusions in the VS2 nanosheets. Furthermore, the field-emission current stability of the VS2 emitter shows stable behavior over a period of 12 h. Further, DFT calculations show that the work function (f) of the single-layer VS2 emitter is 6.01 eV.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">31</style></issue><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">2.942</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>47</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Chavan, Padmakar G.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Joag, Dilip S.</style></author><author><style face="normal" font="default" size="100%">Badadhe, Satish S.</style></author><author><style face="normal" font="default" size="100%">Mulla, Imtiaz S.</style></author></authors><secondary-authors><author><style face="normal" font="default" size="100%">Tsujino, S.</style></author><author><style face="normal" font="default" size="100%">Gobrecht, J.</style></author><author><style face="normal" font="default" size="100%">Paraliev, M.</style></author><author><style face="normal" font="default" size="100%">Braun, H. H.</style></author><author><style face="normal" font="default" size="100%">Groening, O.</style></author><author><style face="normal" font="default" size="100%">Feurer, T.</style></author></secondary-authors></contributors><titles><title><style face="normal" font="default" size="100%">Photo-enhanced field emission studies of tapered CdS nanobelts</style></title><secondary-title><style face="normal" font="default" size="100%">2014 27th International Vacuum Nanoelectronics Conference (IVNC) </style></secondary-title><tertiary-title><style face="normal" font="default" size="100%">International Vacuum Nanoelectronics Conference</style></tertiary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Current stability</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanobelts</style></keyword><keyword><style  face="normal" font="default" size="100%">Photoswitching</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2014</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JUL</style></date></pub-dates></dates><publisher><style face="normal" font="default" size="100%">Paul Scherrer Inst; EMPA, Mat Sci &amp; Technol; Swiss Nanoscience Inst; Appl MicroSWISS; Amer Elements; Amer Vacuum Soc; IEEE, Electron Devices Soc</style></publisher><pub-location><style face="normal" font="default" size="100%">345 E 47th St, New York, NY 10017 USA</style></pub-location><isbn><style face="normal" font="default" size="100%">978-1-4799-5306-6</style></isbn><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Field emission and photo-enhanced field emission characteristics of single crystalline tapered CdS nanobelts have been investigated. The turn-on field for the emission current density of similar to 0.1 mu A/cm(2) is found to be similar to 2.1 V/mu m, which is much lower than reported values for various CdS nanostructures. The photo-enhanced field emission current shows a reproducible photo-switching behavior with rise in current level nearly four times that of its initial preset value (similar to 1 mu A) which is found to be very remarkable. Possible mechanism of photo-enhanced field emission is discussed.&lt;/p&gt;</style></abstract><notes><style face="normal" font="default" size="100%">27th International Vacuum Nanoelectronics Conference (IVNC), Engelberg, SWITZERLAND, JUL 06-10, 2014</style></notes></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Shaikh, Parvez A.</style></author><author><style face="normal" font="default" size="100%">Khare, Ruchita T.</style></author><author><style face="normal" font="default" size="100%">Kashid, Ranjit V.</style></author><author><style face="normal" font="default" size="100%">Chaudhary, Minakshi V.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Ogale, Satishchandra B.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Pulsed laser-deposited MoS2 thin films on W and Si: field emission and photoresponse studies</style></title><secondary-title><style face="normal" font="default" size="100%">ACS Applied Materials &amp; Interfaces</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">MoS2</style></keyword><keyword><style  face="normal" font="default" size="100%">photodiode heterostructures</style></keyword><keyword><style  face="normal" font="default" size="100%">pulsed laser deposition</style></keyword><keyword><style  face="normal" font="default" size="100%">thin film</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2014</style></year><pub-dates><date><style  face="normal" font="default" size="100%">SEP</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">18</style></number><publisher><style face="normal" font="default" size="100%">AMER CHEMICAL SOC</style></publisher><pub-location><style face="normal" font="default" size="100%">1155 16TH ST, NW, WASHINGTON, DC 20036 USA</style></pub-location><volume><style face="normal" font="default" size="100%">6</style></volume><pages><style face="normal" font="default" size="100%">15881-15888</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;We report field electron emission investigations on pulsed laser-deposited molybdenum disulfide (MoS2) thin films on W-tip and Si substrates. In both cases, under the chosen growth conditions, the dry process of pulsed laser deposition (PLD) is seen to render a dense nanostructured morphology of MoS2, which is important for local electric field enhancement in field emission application. In the case of the MoS2 film on silicon (Si), the turn-on field required to draw an emission current density of 10 mu A/cm(2) is found to be 2.8 V/mu m. Interestingly, the MoS2 film on a tungsten (W) tip emitter delivers a large emission current density of similar to 30 mA/cm(2) at a relatively lower applied voltage of similar to 3.8 kV. Thus, the PLD-MoS2 can be utilized for various field emission-based applications. We also report our results of photodiode-like behavior in (n- and p- type) Si/PLDMoS2 heterostructures. Finally we show that MoS2 films deposited on flexible kapton substrate show a good photoresponse and recovery. Our investigations thus hold great promise for the development of PLD MoS2 films in application domains such as field emitters and heterostructures for novel nanoelectronic devices.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">18</style></issue><custom3><style face="normal" font="default" size="100%">Foreign</style></custom3><custom4><style face="normal" font="default" size="100%">5.76</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Erande, Manisha B.</style></author><author><style face="normal" font="default" size="100%">Suryawanshi, Sachin R.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Electrochemically exfoliated black phosphorus nanosheets - prospective field emitters</style></title><secondary-title><style face="normal" font="default" size="100%">European Journal of Inorganic Chemistry</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Layered compounds</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanostructures</style></keyword><keyword><style  face="normal" font="default" size="100%">Phosphorus</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2015</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JUL</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">19</style></number><publisher><style face="normal" font="default" size="100%">WILEY-V C H VERLAG GMBH</style></publisher><pub-location><style face="normal" font="default" size="100%">BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY</style></pub-location><pages><style face="normal" font="default" size="100%">3102-3107</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Herein we report field emission (FE) investigations on an electrochemically exfoliated few-layered black phosphorus nanosheet emitter at a base pressure of approximately 1x10(-8) mbar. The turn-on electric field required to draw an emission current density of approximately 10 A/cm(2) is found to be about 4.2 V/m. Furthermore, few-layered black phosphorus nanosheet emitters deliver an emission current density of about 170 A/cm(2) at an applied field of about 7.5 V/m. The emission current vs. time plot measured at preset current values of about 5 A shows emission current fluctuations within +/- 10% of the average value, indicating the highly stable nature of the black phosphorus field emitter. Thus, the 2D black phosphorus nanosheets synthesized using the simple electrochemical exfoliation method can be utilized for micro/nanoelectronics and flat panel FE display applications.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">19</style></issue><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">2.686</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Naik, Kusha Kumar</style></author><author><style face="normal" font="default" size="100%">Khare, Ruchita T.</style></author><author><style face="normal" font="default" size="100%">Gelamo, Rogerio V.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Thapa, Ranjit</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Rout, Chandra Sekhar</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Enhanced electron field emission from NiCo2O4 nanosheet arrays</style></title><secondary-title><style face="normal" font="default" size="100%">Materials Research Express</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Density functional theory</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">nanosheets</style></keyword><keyword><style  face="normal" font="default" size="100%">NiCo2O4</style></keyword><keyword><style  face="normal" font="default" size="100%">spinel</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2015</style></year><pub-dates><date><style  face="normal" font="default" size="100%">SEP</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">9</style></number><publisher><style face="normal" font="default" size="100%">IOP PUBLISHING LTD</style></publisher><pub-location><style face="normal" font="default" size="100%">TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND</style></pub-location><volume><style face="normal" font="default" size="100%">2</style></volume><pages><style face="normal" font="default" size="100%">095011</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Electron emission properties of electrodeposited spinel NiCo2O4 nanosheet arrays grown on Ni foam have been studied. The work function of NiCo2O4 was calculated by density functional theory using the plane-wave basis set and used to estimate the field enhancement factor. The NiCo2O4 nanosheet arrays exhibited a low turn-on field of 1.86 V mu m(-1) at 1 mu A cm(-2) and current density of 686 mu A cm(-2) at 3.2 V mu m(-1), with field enhancement factor beta = 1460 and good field emission current stability. The field emission properties of the NiCo2O4 nanosheet arrays showed enhanced performance compared to chemically prepared NiCo2O4 nanosheets. Hence, the nanosheet arrays have great potential as robust high performance vertical structure electron emitters for future flat panel displays and vacuum electronic device applications.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">9</style></issue><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">0.968</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Suryawanshi, Sachin R.</style></author><author><style face="normal" font="default" size="100%">Kolhe, Pankaj S.</style></author><author><style face="normal" font="default" size="100%">Rout, Chandra S.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Spectral analysis of the emission current noise exhibited by few layer WS2 nanosheets emitter</style></title><secondary-title><style face="normal" font="default" size="100%">Ultramicroscopy</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Current fluctuations</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Noise</style></keyword><keyword><style  face="normal" font="default" size="100%">WS2 nanosheets</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2015</style></year><pub-dates><date><style  face="normal" font="default" size="100%">FEB</style></date></pub-dates></dates><publisher><style face="normal" font="default" size="100%">ELSEVIER SCIENCE BV</style></publisher><pub-location><style face="normal" font="default" size="100%">PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS</style></pub-location><volume><style face="normal" font="default" size="100%">149</style></volume><pages><style face="normal" font="default" size="100%">51-57</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Spectral analysis of the field emission (FE) current fluctuations has been carried out at the base pressure similar to 1 x 10(-8) mbar. The emission current stability investigated at preset value of 2 mu A is characterized by `step like fluctuation. The spectral analysis performed on a FFT (Fast Fourier Transform) analyzer revealed that the observed noise is of 1/f(alpha) type, with the value of alpha as similar to 1.05. The estimated value of alpha implies that the current fluctuations are mainly due the various processes occurring on atomic scale like adsorption, migration, and/or desorption of the residual gas species on the emitter surface. (C) 2014 Elsevier B.V. All rights reserved.&lt;/p&gt;</style></abstract><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">2.874</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Kadam, Sunil R.</style></author><author><style face="normal" font="default" size="100%">Suryawanshi, Sachin R.</style></author><author><style face="normal" font="default" size="100%">Panmand, Rajendra P.</style></author><author><style face="normal" font="default" size="100%">Mate, Vivek R.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Kale, Bharat B.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Architecture of 2D MoS2 nanosheets and 3D CdMoS4 marigold flowers: consequence of annealing on field emission performance</style></title><secondary-title><style face="normal" font="default" size="100%">Microporous and Mesoporous Materials</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">MoS2 and CdMoS4</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanoflowers</style></keyword><keyword><style  face="normal" font="default" size="100%">nanosheets</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2016</style></year><pub-dates><date><style  face="normal" font="default" size="100%">MAY</style></date></pub-dates></dates><publisher><style face="normal" font="default" size="100%">ELSEVIER SCIENCE BV</style></publisher><pub-location><style face="normal" font="default" size="100%">PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS</style></pub-location><volume><style face="normal" font="default" size="100%">225</style></volume><pages><style face="normal" font="default" size="100%">573-579</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Herein, we report the field electron emission investigations on template free solvothermally synthesized layered MoS2 nanosheets as well as novel phase of CdMoS4 nanoflowers at the base pressure of similar to 1 x 10(-8) mbar. The turn-on field, threshold field and maximum emission current densities for both MoS2 and CdMoS4 are strongly influenced by thermal annealing in inert atmosphere. The turn on field, required to draw emission current density of 1 mu A/cm(2) is found to be 5.8 and 3.2 V/mu m for pristine and annealed MoS2 at 400 degrees C. In case of as prepared and annealed CdMoS4 sample the turn on field values are found to be similar to 6.2 and 5.0 V/mu m, respectively. The emission current versus time (I-t) plot measured at the preset current values of similar to 1 mu A for pristine and annealed sample indicates stable operation of the emitter. The emission current fluctuations for annealed sample are observed to be less as compared with the pristine sample due to conditioning of the emitter, thereby showing highly stable nature of emitter. Thus, the present result demonstrates the potential of annealed MoS2 nanosheets and CdMoS4 nanoflowers as an emerging materials for micro/nanoelectronics and flat panel field emission display applications. (C) 2016 Elsevier Inc. All rights reserved.&lt;/p&gt;</style></abstract><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">&lt;p&gt;3.349&lt;/p&gt;</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Suryawanshi, Sachin R.</style></author><author><style face="normal" font="default" size="100%">Pawbake, Amit S.</style></author><author><style face="normal" font="default" size="100%">Pawar, Mahendra S.</style></author><author><style face="normal" font="default" size="100%">Jadkar, Sandesh R.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Enhanced field emission behavior of layered MoSe2</style></title><secondary-title><style face="normal" font="default" size="100%">Materials Research Express</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">atomically thin nanosheets</style></keyword><keyword><style  face="normal" font="default" size="100%">chemical vapor deposition</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">layered MoSe2</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2016</style></year><pub-dates><date><style  face="normal" font="default" size="100%">MAR</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">3</style></number><publisher><style face="normal" font="default" size="100%">IOP PUBLISHING LTD</style></publisher><pub-location><style face="normal" font="default" size="100%">TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND</style></pub-location><volume><style face="normal" font="default" size="100%">3</style></volume><pages><style face="normal" font="default" size="100%">Article Number: 035003</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Herein, we report one step facile chemical vapor deposition method for synthesis of single-layer MoSe2 nanosheets with average lateral dimension similar to 60 mu m on 300 nm SiO2/Si and n-type silicon substrates and field emission investigation of MoSe2/Si at the base pressure of similar to 1 x 10(-8) mbar. The morphological and structural analyses of the as-deposited single-layer MoSe2 nanosheets were carried out using an optical microscopy, Raman spectroscopy and atomic force microscopy. Furthermore, the values of turn-on and threshold fields required to extract an emission current densities of 1 and 10 mu A cm(-2), are found to be similar to 1.9 and similar to 2.3 V mu m(-1), respectively. Interestingly, the MoSe2 nanosheet emitter delivers maximum field emission current density of similar to 1.5 mA cm(-2) at a relatively lower applied electric field of similar to 3.9 V mu m(-1). The long term operational current stability recorded at the preset values of 35 mu A over 3 hr duration and is found to be very good. The observed results demonstrates that the layered MoSe2 nanosheet based field emitter can open up many opportunities for their potential application as an electron source in flat panel display, transmission electron microscope, and x-ray generation. Thus, the facile one step synthesis approach and robust nature of single-layer MoSe2 nanosheets emitter can provide prospects for the future development of practical electron sources.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">3</style></issue><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">0.968</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Badadhe, Satish S.</style></author><author><style face="normal" font="default" size="100%">Suryawanshi, Sachin R.</style></author><author><style face="normal" font="default" size="100%">Naphade, Rounak A.</style></author><author><style face="normal" font="default" size="100%">Chaudhary, Minakshi V.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Shelke, Manjusha V.</style></author><author><style face="normal" font="default" size="100%">Ogale, Satishchandra B.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Synthesis, microstructure, optical and field emission studies of iron vanadium oxide nanosheets</style></title><secondary-title><style face="normal" font="default" size="100%">Journal of Physics D-Applied Physics</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">FeV3O8</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">nanosheets</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2016</style></year><pub-dates><date><style  face="normal" font="default" size="100%">APR</style></date></pub-dates></dates><number><style face="normal" font="default" size="100%">14</style></number><publisher><style face="normal" font="default" size="100%">IOP PUBLISHING LTD</style></publisher><pub-location><style face="normal" font="default" size="100%">TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND</style></pub-location><volume><style face="normal" font="default" size="100%">49</style></volume><pages><style face="normal" font="default" size="100%">145301</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;We report a single step growth of thin graphene-like, densely packed FeV3O8 (FVO) nanosheets on silicon substrates via facile hydrothermal synthesis. These nanosheets have dimensions of a few microns with thin edges, offering very high aspect ratio. These FVO nanosheets exhibit excellent field emission behaviour with low turn on and threshold voltages of 1.3 V mu m(-1) and 1.7 V mu m(-1), respectively. The corresponding emitter delivers high emission current density of (similar to 1.650 mA cm(-2)) at fairly low applied field (similar to 4.00 V mu m(-1)).&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">14</style></issue><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">2.772</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Suryawanshi, Sachin R.</style></author><author><style face="normal" font="default" size="100%">Kanhe, Nilesh</style></author><author><style face="normal" font="default" size="100%">Mathe, Vikas L.</style></author><author><style face="normal" font="default" size="100%">Phase, Deodatta M.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Extraction of the very high tunneling current and extremely stable emission current from GdB6/W-tip source synthesized using arc plasma</style></title><secondary-title><style face="normal" font="default" size="100%">ChemistrySelect</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Arc Plasma</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Thin films</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2017</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JAN</style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">2</style></volume><pages><style face="normal" font="default" size="100%">562-566</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Herein, we report the one step arc plasma synthesis of the GdB6 (Gadolinium hexaboride) nanoparticles and its field emission (FE) characteristics on tungsten point substrate (GdB6/ W). The SEM /TEM analysis revealed the GdB6 nanoparticles on W point substrate exhibit irregular shaped, grainy, dense, course morphology, i.e. uniformly covering the entire tip substrate surface. For GdB6/W point source, the values of the turn-on and threshold fields, defined as field required to draw an emission current density similar to 1 mA/cm(2) and similar to 100 mA/cm(2), respectively are found to be similar to 2.2 and similar to 2.7 V/mm, for anodecathode separation of similar to 1 mm. Interestingly, a very high emission current density of similar to 3.5 A/cm(2) has been drawn from the GdB6/W point emitter at relatively lower applied field of similar to 6.4 V/mm. The field enhancement factor found to be similar to 10,250. The GdB6/W point electron source exhibits a good emission current stability at similar to 10 mA for a period of 6 hr. The emission current stability is enumerated in terms of standard deviation and its magnitude has been measured to be only 1.72% with respect to the average value. The superlative field emission characteristics signify the GdB6/W point electron source as potential candidates for vacuum micro/nanoelectronics device applications.&lt;/p&gt;</style></abstract><issue><style face="normal" font="default" size="100%">1</style></issue><work-type><style face="normal" font="default" size="100%">Article</style></work-type><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;</style></custom3><custom4><style face="normal" font="default" size="100%">1.505</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Tripathi, Prashant</style></author><author><style face="normal" font="default" size="100%">Gupta, Bipin Kumar</style></author><author><style face="normal" font="default" size="100%">Bankar, Prashant K.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author><author><style face="normal" font="default" size="100%">Srivastava, Onkar Nath</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Graphene nanosheets assisted carbon hollow cylinder for high-performance field emission applications</style></title><secondary-title><style face="normal" font="default" size="100%">Materials Research Express</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Carbon nanotubes</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">graphene assisted carbon hollow cylinder</style></keyword><keyword><style  face="normal" font="default" size="100%">protrusions</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2019</style></year><pub-dates><date><style  face="normal" font="default" size="100%">SEP</style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">6</style></volume><pages><style face="normal" font="default" size="100%">095066</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Electron sources are critical constituents for myriad many electronic applications including electron imaging, mass spectroscopy etc. Here, we report the realization of high-performance field emission from graphene assisted carbon hollow cylinders (Gr-CHCs) composed of multi-stacked radially aligned CNTs. These CHCs have built-in synthesis related Fe nanoparticles (NPs). This engineered nano-structure exhibits excellent field emission properties such as one of the ultra-low turn-on field (0.64V mu m(-1) at 10 mu A cm(-2)), low threshold field (0.74V mu m(-1) at 100 mu A cm(-2)), very high current density (15.49 mA cm(-2) at 1.32V mu m(-1)) which is nearly double the current density obtained in our previous study. High field enhancement factor (0.72. x. 10(4)) with highly stable emission current at 100 mu A was observed for more than 3 hrs at the base pressure of similar to 1. x. 10(-8) mbar. This study suggests an approach to enhance the current density using the proposed innovative nanostructure and forms the basic theme of this communication. Highly efficient and stable field emissions observed are attributed to the geometry of cylinder and the production of the high density of sharp protrusions within the graphene sheets which enhance the local electric field and dramatically enhance field emission. This innovative cylindrical geometry associated with graphene assisted on Fe bearing aligned CNTs along with the periphery of the bulk cylinder provides an easy injection of electrons from the conduction band of CHCs into the vacuum in the presence of an external electric field. The tunability of field emission properties of these CHCs can be easily achieved by tailoring their diameter (10 and 20 mm) and different concentrations of the precursor. This new approach of the graphene assisted cylindrical geometry-based field emitter source provides enormous prospects and demand for next-generation high resolutions display devices.&lt;/p&gt;
</style></abstract><issue><style face="normal" font="default" size="100%">9</style></issue><work-type><style face="normal" font="default" size="100%">Article</style></work-type><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;
</style></custom3><custom4><style face="normal" font="default" size="100%">&lt;p&gt;1.449&lt;/p&gt;
</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Gote, Gorkshnath H.</style></author><author><style face="normal" font="default" size="100%">Bhopale, Somnath R.</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Realization of efficient field emitter based on reduced graphene oxide-Bi2S3 heterostructures</style></title><secondary-title><style face="normal" font="default" size="100%">Physica Status Solidi A-Applications and Materials Science</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Bi2S3</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Heterostructures</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanorods</style></keyword><keyword><style  face="normal" font="default" size="100%">Reduced graphene oxide</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2019</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JUL</style></date></pub-dates></dates><pages><style face="normal" font="default" size="100%">1900121</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Herein, Bi2S3 nanorods and reduced graphene oxide (rGO)-Bi2S3 heterostructures are synthesized using a simple hydrothermal method. The structural, morphological, chemical, and elemental analysis of as-synthesized materials is performed using X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Field emission (FE) studies are carried out on both pristine Bi2S3 nanorods and rGO-Bi2S3 heterostructure samples at a base pressure of approximate to 1 x 10(-8) mbar. The results show that the rGO-Bi2S3 heterostructure emitter has superior FE performance compared to pristine Bi2S3 emitters in terms of the turn-on field (2.6 V mu m(-1) at 10 mu A cm(-2)) and threshold field (4.0 V mu m(-1) at 100 mu A cm(-2)) along with a high emission current density of approximate to 1464 mu A cm(-2) at an applied electric field of 7.0 V mu m(-1). The rGO-Bi2S3 heterostructure emitter exhibits very good emission current stability, tested for more than 3 h duration, characterized by standard deviation values approximate to 2.84 and 4.06, corresponding to preset values 12 and 100 mu A. This study implies that one-step hydrothermal route can be efficiently used to synthesize organic-inorganic heterostructures that possess unique morphology. Furthermore, the synthesized rGO-Bi2S3 heterostructure emitter shows potential as an electron source for practical application in vacuum microelectronic devices.&lt;/p&gt;
</style></abstract><work-type><style face="normal" font="default" size="100%">Article; Early Access</style></work-type><custom3><style face="normal" font="default" size="100%">&lt;p&gt;Foreign&lt;/p&gt;
</style></custom3><custom4><style face="normal" font="default" size="100%">&lt;p&gt;1.606&lt;/p&gt;
</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Badadhe, Satish S.</style></author><author><style face="normal" font="default" size="100%">Yadav, Poonam</style></author><author><style face="normal" font="default" size="100%">Suryawanshi, Sachin</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Facile synthesis of nanocomposites of CNF-Sn and C-Sn microspheres: Prospective field emitter</style></title><secondary-title><style face="normal" font="default" size="100%">Journal of Alloys and Compounds</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">carbon nanofiber</style></keyword><keyword><style  face="normal" font="default" size="100%">electrospinning</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">Nanocomposite</style></keyword><keyword><style  face="normal" font="default" size="100%">Tin</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2022</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JUN </style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">907</style></volume><pages><style face="normal" font="default" size="100%">164318</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;
	We report synthesis of Carbon nanofibers (CNFs) and hybrid nanocomposites namely, CNF-Sn and C-Sn microspheres using simple electrospinning technique, followed by annealing in controlled atmosphere. The as-prepared materials were characterized using X-raydiffraction (XRD), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Ultra-violet photoelectron spectroscopy (UPS), and Raman spectroscopy to reveal their physico-chemical properties. As carbon family members are potential materials for field emission (FE) based applications, owing to their high aspect ratio FE characteristics of the synthesized materials were explored at base pressure of 1 x 10(-8) mbar. Interestingly, the hybrid nanocomposite CNF-Sn and C-Sn emitters showed improved FE behavior (with the turn-on field of 3.4 and 1.36 V/mu m, respectively) in contrast to the pristine CNFs emitter (turn-on field of 5.4 V/mu m). Furthermore, the maximum emission current density is substantially enhanced, 7.75 and 4.6 mA/cm(2) for CNF-Sn and C-Sn emitters, respectively. The improvement in the FE behavior of nanocomposite emitters is attributed to the combined effect of morphology and modulation of electronic properties at the interface of nanocomposites. The results confirm that FE characteristics of pristine nanostructures can be greatly improved upon formation of their nanocomposites and this approach can be extended to other nanostructures for improving their multi-functionalities. (c) 2022 Elsevier B.V. All rights reserved.&lt;/p&gt;
</style></abstract><work-type><style face="normal" font="default" size="100%">Article</style></work-type><custom3><style face="normal" font="default" size="100%">&lt;p&gt;
	Foreign&lt;/p&gt;
</style></custom3><custom4><style face="normal" font="default" size="100%">&lt;p&gt;
	6.371&lt;/p&gt;
</style></custom4></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Pawbake, Amit S.</style></author><author><style face="normal" font="default" size="100%">Khare, Ruchita T.</style></author><author><style face="normal" font="default" size="100%">Island, Joshua O.</style></author><author><style face="normal" font="default" size="100%">Flores, Eduardo</style></author><author><style face="normal" font="default" size="100%">Ares, Jose R.</style></author><author><style face="normal" font="default" size="100%">Sanchez, Carlos</style></author><author><style face="normal" font="default" size="100%">Ferrer, Isabel J.</style></author><author><style face="normal" font="default" size="100%">Pawar, Mahendra</style></author><author><style face="normal" font="default" size="100%">Frank, Otakar</style></author><author><style face="normal" font="default" size="100%">More, Mahendra A.</style></author><author><style face="normal" font="default" size="100%">van der Zant, Herre S. J.</style></author><author><style face="normal" font="default" size="100%">Castellanos-Gomez, Andres</style></author><author><style face="normal" font="default" size="100%">Late, Dattatray J.</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Titanium trisulfide nanosheets and nanoribbons for field emission- based nanodevices</style></title><secondary-title><style face="normal" font="default" size="100%">ACS Applied Nano Materials</style></secondary-title></titles><keywords><keyword><style  face="normal" font="default" size="100%">Current stability</style></keyword><keyword><style  face="normal" font="default" size="100%">field emission</style></keyword><keyword><style  face="normal" font="default" size="100%">nanoribbon</style></keyword><keyword><style  face="normal" font="default" size="100%">nanosheets</style></keyword><keyword><style  face="normal" font="default" size="100%">TiS3</style></keyword></keywords><dates><year><style  face="normal" font="default" size="100%">2023</style></year><pub-dates><date><style  face="normal" font="default" size="100%">JAN</style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">6</style></volume><pages><style face="normal" font="default" size="100%">44-49</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;
	The field emission (FE) properties of TiS3 nanosheets and nanoribbons, synthesized by direct sulfuration of bulk titanium, are investigated. The nanosheets show an enhanced FE behavior with a low turn-on field of similar to 0.3 V/ mu m, required for drawing an emission current density of similar to 10 mu A/cm2. Interestingly, the TiS3 nanosheet emitter delivered a large emission current density of similar to 0.9 mA/ cm2 at a relatively low applied electric field of similar to 0.4 V/mu m. We have estimated the values of the field enhancement factor (beta), which are found to be similar to 5 x 104 for the TiS3 nanosheet emitter and similar to 4 x 103 for the nanoribbon emitter. We attribute the superior FE performance to the presence of atomically sharp edges and the reduced thickness of TiS3, as reflected in the high value of beta. In fact, the nanosheet sample presents a higher density of ultrathin layers (similar to 12 nm-thick), and thus, they have a larger edge to volume ratio than the nanoribbon samples (which are similar to 19 nm-thick). The superior FE behavior of TiS3 nanosheets over nanoribbons makes them a propitious field emitter and can be utilized for various FE-based applications, demanding large emission currents and lower operational voltages. Moreover, the FE current stability recorded on these samples confirms their promising performance. Thus, the present investigation brings out a great promise of TiS3 nanosheets and nanoribbons as field emitters for vacuum nanoelectronics devices.&lt;/p&gt;
</style></abstract><issue><style face="normal" font="default" size="100%">1</style></issue><work-type><style face="normal" font="default" size="100%">Article</style></work-type><custom3><style face="normal" font="default" size="100%">&lt;p&gt;
	Foreign&lt;/p&gt;
</style></custom3><custom4><style face="normal" font="default" size="100%">&lt;p&gt;
	6.140&lt;/p&gt;
</style></custom4></record></records></xml>