03415nas a2200289 4500008004100000245009600041210006900137260000800206490000600214520247900220653001402699653003902713653002502752653001602777653002402793653003602817653001202853653002202865653002302887100001402910700001402924700001902938700001402957700001902971700001402990856012103004 2017 eng d00aNutty carbon: morphology replicating hard carbon from walnut shell for na ion battery anode0 aNutty carbon morphology replicating hard carbon from walnut shel cJUL0 v23 a
Abstract Image

Efficient Na ion intercalation/deintercalation in the semigraphitic lattice of a hard carbon derived from the walnut shell is demonstrated. High-temperature (1000 °C) pyrolysis of walnut shells under an inert atmosphere yields a hard carbon with a low surface area (59 m2 g–1) and a large interplanar c axis separation of 0.39–0.36 nm as compared to 0.32 nm for graphite, suitable for Na ion intercalation/deintercalation. A stable reversible capacity of 257 mAh g–1 is observed at a current density of 50 mA g–1 for such nutshell-derived carbon (NDC) with an impressive rate performance. No loss of electrochemical performance is observed for high current cycling (100 mA g–1 → 2 A g–1 → 100 mA g–1). Additionally, the NDC shows remarkably stable electrochemical performance up to 300 charge–discharge cycles at 100 mA g–1 with a minimal drop in capacity.

10aBatteries10aBiological and Medicinal chemistry10aBiological materials10adiffraction10aElectric Properties10aElectrode-electrolyte interface10aspectra10aSurface structure10aThermal properties1 aWahid, M.1 aGawli, Y.1 aPuthusseri, D.1 aKumar, A.1 aShelke, M., V.1 aOgale, S. uhttps://library.ncl.res.in/content/nutty-carbon-morphology-replicating-hard-carbon-walnut-shell-na-ion-battery-anode02103nas a2200241 4500008004100000022001400041245017400055210006900229260000800298300001400306490000600320520118800326653001401514653002101528653002401549653001501573653002901588100003101617700002801648700003001676700002401706856013101730 2017 eng d a2196-021600aSingle cell fabrication towards the realistic evaluation of a CNT-strung ZIF-derived electrocatalyst as a cathode material in alkaline fuel cells and metal-air batteries0 aSingle cell fabrication towards the realistic evaluation of a CN cNOV a2928-29330 v43 a

The development of an electrocatalyst possessing all the vital requisites of an ideal electrode material, such as high porosity, high conductivity, and high intrinsic electrochemical activity, holds a decisive key in determining the activity of the triplephase boundary in many energy devices like fuel cells and metal-air battery systems. In the present work, highly porous cobalt-based ZIFs are strung along the highly conducive CNT backbone by using a simple one-pot technique at room temperature, which is then utilized to derive a porous, corrosion-resistant, Co nanoparticle-embedded electrocatalyst. Herein, for the first time, the single cell performance of the Co-ZIF-67-derived electrocatalyst has been evaluated by fabricating membrane electrode assemblies of alkaline exchange membrane fuel cell (AEMFC) and zinc-air battery (ZAB) systems. A maximum power density of 296 mW/cm(2) (vs. 317 mW/cm(2) for 40 wt.% Pt/C) and 60 mW/cm(2) (vs. 64 mW/cm(2) for 40 wt.% Pt/C) in the single cells of ZAB and AEMFC systems, respectively, establishes the practical proficiency of the homemade electrocatalyst for cathode applications during realistic system-level validations.

10aBatteries10aCarbon nanotubes10aComposite materials10afuel cells10ametal-organic frameworks1 aAiyappa, Harshitha, Barike1 aBhange, Siddheshwar, N.1 aSivasankaran, Vijitha, P.1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/single-cell-fabrication-towards-realistic-evaluation-cnt-strung-zif-derived-electrocatalyst02408nas a2200265 4500008004100000022001400041245013100055210006900186260000900255300001400264490000600278520151800284653001401802653001801816653002601834653001201860653002101872100001801893700001701911700002001928700002101948700002101969700002101990856013102011 2020 eng d a2196-021600aElectrochemical evaluation of the stability and capacity of r-GO-wrapped copper antimony chalcogenide anode for Li-ion battery0 aElectrochemical evaluation of the stability and capacity of rGOw cAUG  a3291-33000 v73 a

Poor cycling stability and capacity fade are primary concerns for next-generation anode materials for Li-ion batteries. In non-carbonaceous anode materials, alloying with Li leads to volume increase that affects practical applications, and increase in particle size, amorphization and reduced conductivity can all lead to a loss of performance. In this work, binary antimony sulfide (Sb2S3) and ternary copper antimony sulfide (CuSbS2) are synthesized by a convenient solvothermal process. These materials are used to study the Li-active/inactive concept, by incorporating Cu into Sb(2)S(3)forming CuSbS(2)wherein Cu is Li inactive whereas Sb is Li active. By direct comparison, we have shown that incorporating Cu into binary antimony sulfide (Sb2S3) resulting into ternary copper antimony sulfide (CuSbS2) addresses the problem of poor conductivity and capacity loss, as Cu provides conductivity leading to enhanced charge transfer and prevents Sb particle aggregation while charge-discharge by exhibiting spectator or diluent ion effect. The better performance of CuSbS(2)is associated with the better Li(+)ion diffusion in the CuSbS2(D=8.97x10(-15) cm(2) s(-1)) compared to Sb2S3(D=2.76x10(-15) cm(2) s(-1)) and lower series resistance of CuSbS2(R=4.70x10(5) omega) compared to Sb2S3(R=5.81x10(8) omega). We have also investigated the composite with the addition of rGO. The CuSbS2-rGO delivered a reversible capacity of 672 mAh g(-1)after 1000 cycles at 200 mA g(-1)which has shown best performance.

10aBatteries10achalcogenides10aDiffusion coefficient10alithium10aTernary sulfides1 aYadav, Poonam1 aSharma, Neha1 aPatrike, Apurva1 aSabri, Ylias, M.1 aJones, Lathe, A.1 aShelke, Manjusha uhttps://library.ncl.res.in/content/electrochemical-evaluation-stability-and-capacity-r-go-wrapped-copper-antimony-chalcogenide02180nas a2200241 4500008004100000022001400041245011200055210006900167260000800236300001500244490000700259520138600266653001001652653001401662653002001676653001701696653001901713100002001732700001801752700001801770700002101788856012901809 2022 eng d a1864-563100aResearch progress and perspective on lithium/sodium metal anodes for next-generation rechargeable batteries0 aResearch progress and perspective on lithiumsodium metal anodes  cJUL ae2022005040 v153 a

With the development of consumer electronic devices and electric vehicles, lithium-ion batteries (LIBs) are vital components for high energy storage with great impact on our modern life. However, LIBs still cannot meet all the essential demands of rapidly growing new industries. In pursuance of higher energy requirement, metal batteries (MBs) are the next-generation high-energy-density devices. Li/Na metals are considered as an ideal anode for high-energy batteries due to extremely high theoretical specific capacity (3860 and 1165 mAh g(-1) for Li and Na, respectively) and low electrochemical potential (-3.04 V for Li and -2.71 V for Na vs. standard hydrogen electrode). Unfortunately, uncontrolled dendrite growth, high reactivity, and infinite volume change induce severe safety concerns and poor cycle efficiency during their application. Consequently, MBs are far from commercialization stage. This Review represents a comprehensive overview of failure mechanism of lithium/sodium metal anode and its progress for rechargeable batteries through (i) electrolyte optimization, (ii) artificial solid-electrolyte interphase (SEI) layer formation, and (iii) nanoengineering at materials level in current collector, anode, and host. The challenges in current MBs research and potential applications of lithium/sodium metal anodes are also outlined and summarized.

10aanode10aBatteries10adendrite growth10aElectrolytes10aEnergy storage1 aPatrike, Apurva1 aYadav, Poonam1 aShelke, Vilas1 aShelke, Manjusha uhttps://library.ncl.res.in/content/research-progress-and-perspective-lithiumsodium-metal-anodes-next-generation-rechargeable02212nas a2200277 4500008004100000022001400041245008600055210006900141260000800210300001200218490000700230520131600237653001601553653001401569653002201583653002101605653001101626100001801637700003401655700002001689700002201709700002601731700003001757700003001787856011701817 2025 eng d a1613-681000aDiamondoid all-carbon porous aromatic framework host for lithium-sulfur batteries0 aDiamondoid allcarbon porous aromatic framework host for lithiums cJUN a25003880 v213 a

Lithium-sulfur batteries (LSBs) hold incredible potential as next-generation energy storage systems. However, practical applications of LSBs are significantly hindered by several critical challenges. For the first time, scalable all-carbon porous 3D polymers (3DPs) that do not contain heteroatoms or functional groups and do not require post-functionalization are investigated as hosts in lithium-sulfur batteries, demonstrating enhanced cycling stability and overall battery performance. The pyrene-containing 3DP exhibits 75% capacity retention after 600 cycles at 1 C and 52% capacity retention after 1300 cycles at 0.2 C, better than phenyl comprising 3DP. Furthermore, even at higher sulfur loading (4.1 mg cm(-2)) with an electrolyte/sulfur ratio of 5 mu L mg(-1), pyrene 3DP displayed a high capacity of 600 mA h g(-1) and stable performance over 250 cycles with negligible capacity fade. The defined pore structure of 3DPs prevents the migration of polysulfides through physical confinement and the large pi -clouds of 3DPs interact with the negative charge-bearing polysulfides generated in charge-discharge cycles through anion-pi interaction. In this way, The design ensures that the host 3DPs interact with neutral sulfur and anionic polysulfides, resulting in an excellent performance.

10a3D polymers10aBatteries10aLi-Sulfur battery10aporous materials10apyrene1 aKumar, Viksit1 aJavaregowda, Bharathkumar, H.1 aDevasia, George1 aNarayanan, Aswini1 aKrishnamurty, Sailaja1 aKrishnamoorthy, Kothandam1 aBabu, Sukumaran, Santhosh uhttps://library.ncl.res.in/content/diamondoid-all-carbon-porous-aromatic-framework-host-lithium-sulfur-batteries02285nas a2200265 4500008004100000022001400041245008800055210006900143260000800212490000700220520133500227653003301562653001401595653001501609653003101624653003001655100003001685700003401715700002901749700003301778700003201811700002601843700003001869856012001899 2025 eng d a2192-650600aMechanochemical large-scale rapid synthesis of ultrapure sodium hexafluorophosphate0 aMechanochemical largescale rapid synthesis of ultrapure sodium h cJUL0 v903 a

Among the sodium battery electrolytes, sodium hexafluorophosphate (NaPF6) exhibits superior conductivity, anodic stability, and stable cathode electrolyte interface compared to other electrolytes. Therefore, the synthesis of pure NaPF6 through a simple process is very important. Usually, NaPF6 is synthesized using HF. In our approach, NaPF6 is synthesized by grinding dry ammonium hexafluorophosphate (NH4PF6) and sodium metal. Sodium injects an electron into the ammonium ion, which results in the formation of ammonia and hydrogen. The gram scale synthesis is completed in about 30 min. Purification of the product is not needed. The product purity is confirmed by various spectroscopic and electrochemical techniques. Usually, NaPF6 comprises NaF, HF, and solvents as impurities that affect the performance of SIBs. It has been confirmed that the NaPF6 synthesized by our mechanochemical approach in the absence of solvent is devoid of impurities despite the absence of product purification step. Furthermore, the synthesis of pure NaPF6 (250 g) is demonstrated using a grinder used as household item in cooking Indian pancakes, which costs about 300 USD. The duration of the synthesis of 250 g pure NaPF6 is 1 h. The purity of this sample is comparable to that of NaPF6 (5 g) synthesized using mortar and pestle.

10aammonium hexafluorophosphate10aBatteries10acarbonates10asodium hexafluorophosphate10asodium vanadium phosphate1 aSenthilkumaran, Marimuthu1 aJavaregowda, Bharathkumar, H.1 aRajendran, Prakash, Babu1 aBalasubramanian, Rajalakshmi1 aAjithkumar, Thalasseril, G.1 aRavindranathan, Sapna1 aKrishnamoorthy, Kothandam uhttps://library.ncl.res.in/content/mechanochemical-large-scale-rapid-synthesis-ultrapure-sodium-hexafluorophosphate