01682nas a2200277   4500008004100000022001400041245004800055210004800103260006900151300001400220490000800234520082400242653001901066653002001085653003301105653001401138100002201152700002401174700002301198700002301221700001901244700002001263700002001283700002101303856008001324       2006                        eng d  a0040-609000aField emission from oriented tin oxide rods0 aField emission from oriented tin oxide rods  aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcDEC  a1450-14540 v5153 a<p>Tin oxide (SnO2) films were grown on silicon substrates by a wet chemical route. It was found from scanning electron microscopy investigations that oriented SnO2 rods normal to the substrates were obtained. Field emission studies were carried out in diode configuration in an all metal ultra high vacuum chamber at a base pressure similar to 1.33 x 10(-8) mbar. The `onset' field required to draw 0.1 mu A/cm(2) current density from the emitter cathode was found to be similar to 3.4 V/mu m for SnO2 rods. The field emission current and applied field follows the Folwer-Nordheim relationship in low field regime. The observed results indicate that the field emission characteristics of chemically grown SnO2 structures are comparable to the vapor grown nanostructures. (c) 2006 Elsevier B.V. All rights reserved.</p>10afield emission10amicrostructures10ascanning electron microscopy10atin oxide1 aDeshpande, A., C.1 aKoinkar, Pankaj, M.1 aAshtaputre, S., S.1 aMore, Mahendra, A.1 aGosavi, S., W.1 aGodbole, P., D.1 aJoag, Dilip, S.1 aKulkarni, S., K.  uhttps://library.ncl.res.in/content/field-emission-oriented-tin-oxide-rods-001619nas a2200229   4500008004100000022001400041245010500055210006900160260000800229300001600237490000700253520083900260653001301099653002301112653002001135653002001155653002201175100002201197700002701219700001601246856012701262       2019                        eng d  a0272-884200aMagnetic parameters of SrFe12O19 sintered from a mixture of nanocrystalline and micron-sized powders0 aMagnetic parameters of SrFe12O19 sintered from a mixture of nano  cJUL  a13592-135960 v453 a<p>Obtaining higher magnetic parameters is essential for high-power sintered strontium ferrite (SrFe12O19) for various applications. A novel approach has been made to improve the magnetic parameters of sintered strontium ferrite by making self-composites from nano and micron-sized powders. Powders with two different weight ratios (50 wt% nano:50 wt% micron and 75 wt% nano:25 wt% micron) were mixed together, compacted and sintered at 1200 degrees C for 1 h. For a self-composite of 75 wt% nano and 25 wt% micron-sized powders, coercivity (H-c) of 3076 Oe has been obtained, larger than the values for the sintered compacts from the component powders. The present study suggests that the magnetic parameters of sintered SrFe12O19 can be improved by making self-composite comprising of nanocrystalline and micron-sized powders.</p>
10aCeramics10aMagnetic materials10amicrostructures10aSelf-composites10astrontium ferrite1 aShashanka, H., M.1 aAnantharamaiah, P., N.1 aJoy, P., A.  uhttps://library.ncl.res.in/content/magnetic-parameters-srfe12o19-sintered-mixture-nanocrystalline-and-micron-sized-powders