01708nas a2200229   4500008004100000022001400041245006200055210005900117260010600176300001400282490000700296520089800303653003201201653001101233653003301244653002301277653003101300100001501331700002001346700001801366856009401384       2005                        eng d  a0010-938X00aCorrosion protective poly(o-toluldine) coatings on copper0 aCorrosion protective polyotoluldine coatings on copper  aTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLANDbPERGAMON-ELSEVIER SCIENCE LTDcJUN  a1352-13690 v473 a<p>This study examines the use of poly(o-toulidine) (POT) coatings for corrosion protection of copper (Cu) in an aqueous solution of 3% NaCl. The POT coatings were synthesized on Cu substrates under cyclic voltammetric conditions from an aqueous solution of sodium oxalate. The resulting, POT coatings were uniform, shiny and strongly adherent to the Cu substrates. These coatings were characterized by cyclic voltammetry (CV), UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The ability of POT to serve as a corrosion protective coating for Cu was examined by potentiodynamic polarization measurements and CV. The results of this study clearly reveal that the POT acts as corrosion protective coating on Cu and reduces the corrosion rate of Cu almost by a factor of 40. (c) 2004 Elsevier Ltd. All rights reserved.</p>10aConducting polymer coatings10aCopper10aCorrosion resistant coatings10acyclic voltammetry10apoly(o-toluidine) coatings1 aShinde, V.1 aSainkar, S., R.1 aPatil, P., P.  uhttps://library.ncl.res.in/content/corrosion-protective-polyo-toluldine-coatings-copper-001804nas a2200241   4500008004100000022001400041245013100055210006900186260006900255300001400324490000800338520085200346653003201198653003401230653002301264653003501287653002101322653003101343100002101374700002001395700001801415856012901433       2006                        eng d  a0257-897200aElectrochemical polymerization of o-anisidine on low carbon steel from aqueous salicylate solution: corrosion protection study0 aElectrochemical polymerization of oanisidine on low carbon steel  aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcDEC  a2240-22470 v2013 a<p>The electrochemical polymerization of o-anisidine was carried out on low carbon steel from an aqueous salicylate medium using cyclic voltammetry. The resulting poly(o-anisidine) coatings were uniform and adherent to the steel substrates. These coatings were characterized by cyclic voltammetry, LTV-visible absorption spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction measurements and scanning electron microscopy. The ability of the poly(o-anisidine) coatings to protect low carbon steel in an aqueous 3% NaCl was evaluated by the potentiodynamic polarization measurements. The potentiodynamic polarization measurement reveals that the poly(o-anisidine) coating increases the corrosion potential and reduces the corrosion rate of low carbon steel almost by a factor of 15. (c) 2006 Elsevier B.V. All rights reserved.</p>10aConducting polymer coatings10acorrosion protective coatings10acyclic voltammetry10aElectrochemical polymerization10alow carbon steel10apoly(o-anisidine) coatings1 aWankhede, M., G.1 aGaikwad, A., B.1 aPatil, P., P.  uhttps://library.ncl.res.in/content/electrochemical-polymerization-o-anisidine-low-carbon-steel-aqueous-salicylate-solution-001828nas a2200229   4500008004100000022001400041245012000055210006900175260012000244300001200364490000600376520087200382653003201254653003401286653002301320653003501343653003601378100001801414700002001432700001801452856012801470       2006                        eng d  a1468-699600aElectrochemical synthesis of corrosion protective polyaniline coatings on mild steel from aqueous salicylate medium0 aElectrochemical synthesis of corrosion protective polyaniline co  aNATL INST MATERIALS SCIENCE, 1-2-1 SENGEN, TSUKUBA-CITY, IBARAKI, 305-0047, JAPANbNATL INST MATERIALS SCIENCEcOCT  a732-7440 v73 a<p>Strongly adherent polyaniline coatings were electrochemically synthesized on mild steel from an aqueous salicylate medium. These coatings were characterized by cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy. The extent of the corrosion protection offered by polyaniline coatings to mild steel was investigated in aqueous 3% NaCl solution, 0.01 M Na2SO4 Solution and in aqueous solutions of NaCl + Na2SO4 with different concentrations by potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results of these studies reveal that the corrosion resistance of the polyaniline-coated mild steel is significantly higher and the corrosion rate is considerably lower than that of uncoated steel. (c) 2006 Published by NIMS and Elsevier Ltd.</p>10aConducting polymer coatings10acorrosion protective coatings10acyclic voltammetry10aElectrochemical polymerization10apolyaniline coatings mild steel1 aPawar, Pritee1 aGaikwad, A., B.1 aPatil, P., P.  uhttps://library.ncl.res.in/content/electrochemical-synthesis-corrosion-protective-polyaniline-coatings-mild-steel-aqueous-001970nas a2200253   4500008004100000022001400041245008700055210006900142260006900211300001400280490000800294520108000302653003201382653001101414653003301425653002301458653003101481100001501512700002001527700001801547700002001565700001801585856011301603       2006                        eng d  a0257-897200aPoly(o-toluidine) coatings on copper: electrochemical synthesis from aqueous media0 aPolyotoluidine coatings on copper electrochemical synthesis from  aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcAPR  a5094-51010 v2003 a<p>Poly(o-toluidine) (POT) coatings were synthesized on copper (Cu) by electrochemical polymerization of o-toluidine using aqueous sodium oxalate solution as supporting electrolyte. The resulting coatings were uniform, compact and strongly adherent to the Cu substrate. These coatings were characterized by using cyclic voltammetry, UV-visible absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) measurements and X-ray photoelectron spectroscopy (XPS). The results of these studies reveal that the sodium oxalate is suitable supporting electrolyte for the electrochemical polymerization of o-toluidine on Cu substrate. It is found that the electrochemical polymerization of o-toluidine takes place after the passivation of the Cu substrate via formation of copper oxalate (CuC2O4, H2O) layer, which is confirmed by XRD and XPS. The optical absorption spectroscopy study reveals the exclusive formation of the pernigraniline base (PB) form of POT. (c) 2005 Elsevier B.V. All rights reserved.</p>10aConducting polymer coatings10aCopper10aCorrosion resistant coatings10acyclic voltammetry10apoly(o-toluidine) coatings1 aShinde, V.1 aMandale, A., B.1 aPatil, K., R.1 aGaikwad, A., B.1 aPatil, P., P.  uhttps://library.ncl.res.in/content/polyo-toluidine-coatings-copper-electrochemical-synthesis-aqueous-media-002128nas a2200241   4500008004100000022001400041245006500055210006200120260006900182300001000251490000700261520128300268653003201551653003301583653002301616653003501639653003401674653002001708100002401728700002001752700001801772856009601790       2007                        eng d  a0300-944000aPoly(o-ethylaniline) coatings for stainless steel protection0 aPolyoethylaniline coatings for stainless steel protection  aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcJAN  a54-630 v583 a<p>The poly(o-ethylaniline) coatings were electrochemically synthesized on 304-stainless steel by using cyclic voltammetry from an aqueous salicylate medium. Cyclic voltammetry, UV-vis absorption spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize these coatings, which indicates that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-ethyaniline on 304-stainless steel. The performance of poly(o-ethylaniline) as protective coating against corrosion of 304-stainless steel in aqueous 3% NaCl was evaluated by the open circuit potential measurements, potentiodynamic polarization technique, cyclic potentiodynamic polarization measurements and electrochemical impedance spectroscopy. The results of the potentiodynamic polarization and cyclic potentiodynamic polarization demonstrate that the poly(o-ethylaniline) coating provides excellent protection to both localized and general corrosion of 304-stainless steel. The corrosion potential was about 0.190 V more positive in aqueous 3% NaCl for the poly(o-ethylaniline) coated steel than that of bare steel and reduces the corrosion rate of steel almost by a factor of 20. (c) 2006 Elsevier B.V. All rights reserved.</p>10aConducting polymer coatings10aCorrosion resistant coatings10acyclic voltammetry10aElectrochemical polymerization10apoly(o-ethylaniline) coatings10astainless steel1 aChaudhari, Sudeshna1 aSainkar, S., R.1 aPatil, P., P.  uhttps://library.ncl.res.in/content/polyo-ethylaniline-coatings-stainless-steel-protection-001936nas a2200265   4500008004100000022001400041245011800055210006900173260005700242300001200299490000600311520097800317653000801295653003201303653003301335653002301368653003501391653001501426653001901441653002201460100002401482700002001506700001801526856012601544       2010                        eng d  a1547-009100aSynthesis and corrosion protection aspects of poly(o-toluidine)/CdO nanoparticle composite coatings on mild steel0 aSynthesis and corrosion protection aspects of polyotoluidineCdO   a233 SPRING ST, NEW YORK, NY 10013 USAbSPRINGERcJAN  a119-1290 v73 a<p>This study examines the possibility of using poly(o-toluidine)/CdO (POT-CdO) nanoparticle composite coating for corrosion protection of mild steel in chloride environment. The POT-CdO nanoparticle composite coating was synthesized on mild steel from aqueous tartrate solution containing CdO-nanoparticles (size similar to 18 nm) by using cyclic voltammetry. These coatings were characterized by cyclic voltammetry, UV-Visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction measurements. The corrosion protection aspects of the resulting POT-CdO nanocomposite structure were investigated in aqueous 3% NaCl solution by potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results of these investigations reveal that the POT-CdO nanoparticle composite acts as a protective coating on mild steel and reduces the corrosion rate of mild steel almost by factor of 70.</p>10aCdO10aConducting polymer coatings10aCorrosion resistant coatings10acyclic voltammetry10aElectrochemical polymerization10aMild steel10aNanocomposites10aPoly(o-toluidine)1 aChaudhari, Sudeshna1 aGaikwad, A., B.1 aPatil, P., P.  uhttps://library.ncl.res.in/content/synthesis-and-corrosion-protection-aspects-polyo-toluidinecdo-nanoparticle-composite-0