02023nas a2200241   4500008004100000022001400041245010300055210006900158260007400227300001200301490000700313520114200320653002001462653002101482653001901503653002601522653002301548100002201571700002001593700002001613700001901633856012901652       2005                        eng d  a1385-344900aCharacterization of barium titanate: BaTiO3 (BT) ceramics prepared from sol-gel derived BT powders0 aCharacterization of barium titanate BaTiO3 BT ceramics prepared   aVAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDSbSPRINGERcNOV  a103-1080 v153 a<p>Sol-gel synthesis was attempted at room temperature by adding drop wise a clear solution (made by reacting BaCO3 with glacial acetic acid) to an equi-molar solution of titanium tetrabutoxide in isopropanol (IPA) and acetic acid. The gelation occurred within 30 minutes. The as-dried gel was calcined at 750 degrees C/6 h in air to obtain carbon free BaTiO3 powders. The resulting BT powders were further pressed into pellets and sintered at 1280 degrees C/4 h in air to get dense ceramics (density similar to 94%). XRD and SEM techniques were used for phase and microstructure analysis respectively. The room temperature relative permittivity (e) of 1280 increased to 7200 (at Curie temperature of 127 degrees C) at 1 kHz frequency. The dissipation factor (tan delta) similar to 1.6% was observed in these samples. Also, the ferroelectric properties such as spontaneous polarization (Ps similar to 13 mu C/cm(2)), coercive field (E-c similar to 4.0 kV/cm) and dielectric strength (similar to 34 kV/cm) are estimated for these samples. These performance parameters are compared with the available standard data from the literature.</p>10abarium titanate10aferroelectricity10aMicrostructure10arelative permittivity10asol-gel processing1 aDeshpande, S., B.1 aGodbole, P., D.1 aKhollam, Y., B.1 aPotdar, H., S.  uhttps://library.ncl.res.in/content/characterization-barium-titanate-batio3-bt-ceramics-prepared-sol-gel-derived-bt-powders-002254nas a2200301   4500008004100000022001400041245012100055210006900176260013200245300001200377490000600389520113200395653003001527653002001557653001601577653001601593653002701609653002301636653001901659653001401678100001701692700001901709700001901728700002401747700002101771700003001792856013001822       2010                        eng d  a1475-743500aFabrication of homogeneous nanoparticle/nanoneedle BaTiO3 and Ba0.8Sr0.2TiO3 smooth thin films by simple dip coating0 aFabrication of homogeneous nanoparticlenanoneedle BaTiO3 and Ba0  aWORLD TRADE CENTER BLDG, 29 ROUTE DE PRE-BOIS, CASE POSTALE 896, CH-1215 GENEVA, SWITZERLANDbINDERSCIENCE ENTERPRISES LTDcDEC  a919-9310 v73 a<p>Ferroelectric BaTiO3 (BTO) and Ba0.8Sr0.2TiO3 (BSTO) thin film materials have been successfully prepared by sol-gel processing and simple dip coating on glass and silicon supports. Above thin films were characterised by x-ray diffraction (XRD), Raman spectroscopy, photoelectron spectroscopy, thermal analysis, atomic force microscopy (AFM) and spectroscopic ellipsometry. Phase identification of BaTiO3 and Ba0.8Sr0.2TiO3 was performed by XRD. XRD and Raman spectroscopy investigations demonstrate that thc Ba0.8Sr0.2TiO3 film exhibits tetragonal structure. AFM analysis demonstrates the elongated nanospherical particles on glass substrate and nanowires on silicon substrate, which represent a strong influence of the crystallinity of underlying substrate on the grain morphology in this technique. The thin films on both the substrates are uniformly coated without any pinhole to significant area (similar to 2.5 cm(2)), and this method might be extended to large area uniform coating. Spectroscopic ellipsometric measurements reveal the exact thickness, refractive index and extinction coefficient of the thin films.</p>10abarium strontium titanate10abarium titanate10adip coating10afabrication10aferroelectric material10alarge area coating10ananotechnology10athin film1 aSaini, Mamta1 aVivekanand, K.1 aPoddar, Pankaj1 aMurty, K., V. G. K.1 aThushara, K., S.1 aGopinath, Chinnakonda, S.  uhttps://library.ncl.res.in/content/fabrication-homogeneous-nanoparticlenanoneedle-batio3-and-ba08sr02tio3-smooth-thin-films-0