01973nas a2200253 4500008004100000022001400041245017000055210006900225260006900294300001200363490000800375520096400383653002801347653002001375653003101395653003701426653001901463653003101482100001501513700002001528700002001548700002601568856012501594 2009 eng d a0925-400500aVapour sensing with conductive polymer nanocomposites (CPC): polycarbonate-carbon nanotubes transducers with hierarchical structure processed by spray layer by layer0 aVapour sensing with conductive polymer nanocomposites CPC polyca aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcJUL a451-4600 v1403 a

The development of conductive polymer nanocomposite (CPC) sensors for volatile organic compounds (VOC) detection has been carried out using a spray layer by layer (LbL) process. This technique was successfully used to hierarchically structure polycarbonate-multiwall carbon nanotubes (PC-CNT) solutions into a double percolated architecture as attested by atomic force microscopy (AFM) and optical microscopy (OM). PC-CNT vapour sensing behaviour was investigated as a function of CNT content, films thickness, vapour flow and vapours solubility parameter. The response ranking A(r)(toluene)>A(r)(methanol)>A(r)(water)of PC-CNT was found to be coherent with kappa(12) Flory-Huggins interaction parameters provided that signals are normalised by analyte molecules number. Signals shape was interpreted to the light of Langmuir-Henry-Clustering (LHC) model and found to be proportional to vapour content. (C) 2009 Elsevier B.V. All rights reserved.

10aAtomic force microscopy10acarbon nanotube10aChemo-electrical behaviour10aConductive polymer nanocomposite10aVapour Sensing10aVolatile organic compounds1 aLu, Jianbo1 aKumar, Bijandra1 aCastro, Mickael1 aFeller, Jean-Francois uhttps://library.ncl.res.in/content/vapour-sensing-conductive-polymer-nanocomposites-cpc-polycarbonate-carbon-nanotubes-002056nas a2200229 4500008004100000022001400041245012700055210006900182260007300251300001200324490000800336520116700344653001501511653002501526653002001551653002101571653003401592653002901626100001901655700002501674856012701699 2013 eng d a0301-462200aSurface induced collapse of A beta(1-42) with the F19A replacement following adsorption on a single walled carbon nanotube0 aSurface induced collapse of A beta142 with the F19A replacement  aPO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSbELSEVIER SCIENCE BVcDEC a108-1150 v1843 a

Spontaneous adsorption of the A beta peptide on the surface of a single-walled carbon nanotube, resulting in the prevention of its intrinsic propensity to form collapsed states, could be a plausible means to hinder the peptide's initial nucleation and self-assembly. We report here the effects of sharply reducing both aromatic and hydrophobic character within the peptide's central hydrophobic core on its free and surface behavior. In such an altered peptide, complete surface adsorption is found to induce, rather than prevent, the adsorbed peptide's collapse. The weakened surface interactions of the central hydrophobic core allow its greater translational mobility on the surface, thereby facilitating interactions that lead to compaction. Both the adsorption and the subsequent collapse are accompanied by a loss of surface hydration in the modified peptide. We further find that such a two-step dewetting leads to hydration levels comparable to that obtained after compaction of the free peptide. These insights may be leveraged for designing molecular surfaces for disrupting intrinsic A beta behavior. (C) 2013 Elsevier B.V. All rights reserved.

10aAdsorption10aAmyloid beta peptide10acarbon nanotube10aLateral mobility10amolecular dynamics simulation10aSurface induced collapse1 aJana, Asis, K.1 aSengupta, Neelanjana uhttps://library.ncl.res.in/content/surface-induced-collapse-beta1-42-f19a-replacement-following-adsorption-single-walled-002386nas a2200253 4500008004100000022001400041245008400055210006900139260007100208300001600279490000600295520147900301653002101780653002001801653002001821653001401841653003001855100002501885700002701910700002801937700002701965700002401992856011602016 2015 eng d a1944-824400aCarbon nanohorn-derived graphene nanotubes as a platinum-free fuel cell cathode0 aCarbon nanohornderived graphene nanotubes as a platinumfree fuel a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcNOV a24256-242640 v73 a

Current low-temperature fuel cell research mainly focuses on the development of efficient nonprecious electrocatalysts for the reduction of dioxygen molecule due to the reasons like exorbitant cost and scarcity of the current state-of-the-art Pt-based catalysts. As a potential alternative to such costly electrocatalysts, we report here the preparation of an efficient graphene nanotube based oxygen reduction electrocatalyst which has been derived from single walled nanohorns, comprising a thin layer of graphene nanotubes and encapsulated iron oxide nanopartides (FeGNT). FeGNT shows a surface area of 750 m(2)/g, which is the highest ever reported among the metal encapsulated nanotubes. Moreover, the graphene protected iron oxide nanoparticles assist the system to attain efficient distribution of Fe-N-x and quaternary nitrogen based active reaction centers, which provides better activity and stability toward the oxygen reduction reaction (ORR) in acidic as well as alkaline conditions. Single cell performance of a proton exchange membrane fuel cell by using FeGNT as the cathode catalyst delivered a maximum power density of 200 mW cm(-2) with Nafion as the proton exchange membrane at 60 degrees C. The facile synthesis strategy with iron oxide encapsulated graphitic carbon morphology opens up a new horizon of hope toward developing Pt-free fuel cells and metal-air batteries along with its applicability in other energy conversion and storage devices.

10acarbon nanohorns10acarbon nanotube10aelectrocatalyst10afuel cell10aoxygen reduction reaction1 aUnni, SreeKuttan, M.1 aIllathvalappil, Rajith1 aBhange, Siddheshwar, N.1 aPuthenpediakkal, Hasna1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/carbon-nanohorn-derived-graphene-nanotubes-platinum-free-fuel-cell-cathode-002055nas a2200241 4500008004100000022001400041245004200055210004200097260010200139300001400241490000800255520129300263653002001556653002401576653000901600653001901609653001701628653002501645100001801670700001901688700003201707856007401739 2016 eng d a0011-389100aVarious types of separation membranes0 aVarious types of separation membranes aC V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIAbINDIAN ACAD SCIENCEScAPR a1426-14380 v1103 a

Membrane-based separation is a superior alternative to conventional processes in many separation problems of practical importance. For maximum effectiveness, both high selectivity and flux are desirable. This article summarizes the global efforts at designing new membrane materials, particularly carbon nanotube (CNT)-based membranes, to achieve the twin objectives mentioned above. Interest in CNT emanates from the excellent transport property of molecules through its frictionless smooth walls, with/without functionalization at the end tips. Permeation of water through graphene oxide (GO) channels, which are otherwise impermeable to solutes, has also generated considerable interest, and GO is being viewed as a promising material for separations. The performances of conducting polymers like polypyrrole, polyaniline, polythiophene-3, 4-ethylenedioxythiophene and their different composites have been studied as a function of changes in morphology and redox behaviour, and this aspect too is covered in the present article. Also, the dependence of the separation performances based on the size, charge and hydrophobic/hydrophilic properties has been discussed in detail. Advances in understanding will have an important bearing on future developments in separation science.

10acarbon nanotube10aconducting polymers10aflux10agraphene oxide10apermeability10aseparation membranes1 aDas, Debasree1 aDatta, Anindya1 aContractor, Aliasgar, Qutub uhttps://library.ncl.res.in/content/various-types-separation-membranes02872nas a2200253 4500008004100000022001400041245010000055210006900155260000800224300001400232490000600246520202700252653002002279653002002299653001402319653003002333653001602363100002802379700001502407700001902422700002302441700002402464856013002488 2020 eng d a2574-097000aFeNx/FeSx-anchored carbon sheet-carbon nanotube composite electrocatalysts for oxygen reduction0 aFeNxFeSxanchored carbon sheetcarbon nanotube composite electroca cMAR a2234-22450 v33 a

Even though various Pt-free electrocatalysts for oxygen reduction reaction (ORR) have been introduced, many of them are found to be active only in alkaline conditions. Considering Nafion, phosphoric acid-doped polybenzimidazole (PBI), and so on as the prominent ionomer membranes, used in the commercially available polymer electrolyte membrane fuel cells (PEMFCs), it becomes important that any development on the Pt-free catalysts should ensure the better ORR performance under acidic conditions. The present work effectively tackles this issue, where an ORR-based catalyst could be prepared with simultaneous incorporation of both Fe-N and Fe-S active sites on in situ generated carbon sheets which are spatially separated by the carbon nanotube (CNT) network. This catalyst shows ability to perform under both acidic and basic conditions. This has been achieved by growing a polyethylenedioxythiophene polymer network in the presence of CNT and melamine followed by its pyrolysis under an inert atmosphere. The catalyst formed at 900 degrees C (PMCNT-900) displays 0.94 V onset potential for ORR under acidic electrolyte conditions, which corresponds to 60 mV overpotential compared to its 40 wt % Pt/C counterpart. Interestingly, in single cell demonstration of Nafion-based PEMFC with PMCNT-900 as the cathode catalyst, the system delivered a maximum power density (PD) of 500 and 275 mW/cm(2) at 60 degrees C under H-2-O-2 and H-2-air feed conditions, respectively. On the other hand, in a single cell test in the anion exchange membrane fuel cell (AEMFC) mode, a maximum power density of 65 mW/cm(2) at 50 degrees C could be achieved with the same cathode catalyst, which is a comparable value obtained while employing Pt/C as the cathode. These results, thus, infer to the efficiency of the catalyst to facilitate ORR under the extreme pH conditions, and particularly its performance under acidic condition reveals its prospect as a potential Pt-free electrocatalyst to serve in the Nafion-based systems.

10acarbon nanotube10aelectrocatalyst10afuel cell10aoxygen reduction reaction10aPt-free ORR1 aBhange, Siddheshwar, N.1 aSoni, Roby1 aSingla, Gourav1 aAjithkumar, T., G.1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/fenxfesx-anchored-carbon-sheet-carbon-nanotube-composite-electrocatalysts-oxygen-reduction02851nas a2200277 4500008004100000022001400041245009800055210006900153260000800222300001400230490000700244520195500251653002002206653001802226653002502244653002802269653001902297100001902316700001902335700001802354700001902372700002302391700001802414700001802432856012302450 2022 eng d a0363-907X00aWearable fabric supercapacitors based on CNTs and polyhedral ZnO with a wide potential window0 aWearable fabric supercapacitors based on CNTs and polyhedral ZnO cMAY a8186-82000 v463 a

Wearable electronic devices such as health monitors, sensors, and e-skin can be powered by lightweight, high-power supercapacitors. Using a binder-free and low-temperature hydrothermal method, polyhedral ZnO nanoparticles were grown on carbon nanotube (CNT)-decorated cotton fabric, which is friendly to human skin and highly wearable, inexpensive, and thus commercially viable. The concentration of the starting material, zinc acetate, was varied to optimize the electrochemical performance. The evenly spaced polyhedral ZnO facilitated efficient permeation of the electrolyte into the active material. The fabric filaments were decorated with CNTs to enhance electron transfer and the overall electrochemical processes. The symmetric cell comprised of cotton fabric decorated with ZnO polyhedron/CNT showed no discernible change in the cyclic voltammetry curves even after 500 bending cycles, demonstrating the mechanical durability of the electrode. The potential window of 1.6 V using a Na2SO4/K2SO4 aqueous dual-ion electrolyte improved the long-term electrochemical stability and increased the energy storage capacity. The capacitance retention was 94% after 5000 cycles at a current density of 1 A center dot g(-1), indicating long-term electrochemical stability. A specific capacitance of 375 F center dot g(-1) at a current density of 5 A center dot g(-1) and energy density of 33.3 Wh center dot kg(-1) at a power density of 2000 W center dot kg(-1) were recorded for the optimized electrode. Highlights Polyhedral ZnO was grown on cotton fabric using a hydrothermal process. The electrochemical performance was optimized by varying the zinc acetate concentration. The highest specific capacitance was 375 F center dot g(-1) at a current density of 5 A center dot g(-1). Under optimal conditions, the capacitance retention was 94% at N = 5000 cycles. The energy density of the electrode was as high as 33.3 Wh center dot kg(-1).

10acarbon nanotube10aCotton fabric10ahydrothermal process10awearable supercapacitor10aZnO polyhedron1 aSamuel, Edmund1 aJoshi, Bhavana1 aPark, Chanwoo1 aAldalbahi, Ali1 aEl-Newehy, Mohamed1 aLee, Hae-Seok1 aYoon, Sam, S. uhttps://library.ncl.res.in/content/wearable-fabric-supercapacitors-based-cnts-and-polyhedral-zno-wide-potential-window