02300nas a2200253 4500008004100000022001400041245010400055210006900159260007900228300001200307490000700319520138300326653001601709653001401725653001601739653001301755653002501768100002201793700003201815700002401847700002101871700002201892856013201914 2016 eng d a2194-574800aDifferentiating process performance of various coagulants in removal of congo red and orange G dyes0 aDifferentiating process performance of various coagulants in rem aGENTHINER STRASSE 13, D-10785 BERLIN, GERMANYbWALTER DE GRUYTER GMBHcFEB a195-2110 v143 a

Two refractory azo dyes-Congo red and Orange G, especially at high concentrations were subjected to coagulation with different conventional coagulants and newer formulations developed from Aluminum sulfate, Iron (III) chloride, Aluminium chloride, Poly diallydimethylammonium chloride (Poly DADMAC) and Poly Aluminium Chloride (PAC). The highest COD reduction of 99 % was obtained with PAC SAB 18 (Powder Grade PAC) for Congo red at pH 4.5 while the color removal of 99 % was achieved with almost all the coagulants in the present study at specific pH within 3-8. The optimum dose for the iron-based coagulant is 200 mg/L while that of aluminum-based coagulants and PAC is 150-200 mg/L. Results showed that Orange G was more difficult to remove with a maximum COD removal of 65 % and 35 % color removal using various formulations. The combinational formulations of inorganic-inorganic and inorganic- organic produced a substantial enhancement in COD and color removal and reduced sludge. PAC-Fe30/70 produces the minimum sludge of 50 mL/g on Congo red. pH in the range 3-9 showed high reductions in COD and color (90-99 %) for Congo red while jerky rise in COD and color reduction was observed in the case of Orange G after pH 9. An attempt to understand the dye coagulation mechanism has been made based on the specific difference in dye structure and cation speciation.

10acoagulation10aCongo red10adye removal10aOrange G10aWastewater treatment1 aPrajapati, Kavita1 aSorokhaibam, Laxmi, Gayatri1 aBhandari, Vinay, M.1 aKilledar, D., J.1 aRanade, Vivek, V. uhttps://library.ncl.res.in/content/differentiating-process-performance-various-coagulants-removal-congo-red-and-orange-g-dyes-002328nas a2200253 4500008004100000022001400041245006700055210006700122260007100189300001400260490000600274520150100280653001601781653001601797653002301813653001701836653001401853100001701867700003201884700002401916700001301940700002201953856009901975 2016 eng d a2168-048500aGreen approach to dye wastewater treatment using biocoagulants0 aGreen approach to dye wastewater treatment using biocoagulants a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcMAY a2495-25070 v43 a

The present study focuses on newer biocoagulants, bioformulations, and the understanding of coagulant behavior with biocoagulants in relation to chemical coagulants. Newer biocoagulants, seeds of Azadirachta indica (AI) and pads of Acanthocereus tetragonus, are discussed along with two known biocoagulants, Moringa oleifera and Cicer arietinum seeds. Dye removal studies were carried out using widely reported Congo red dye to facilitate easy comparison with other conventional coagulants and the effect of various parameters such as initial dye concentration, pH, coagulant dose, etc. are discussed in detail. The use of biocoagulant was found to be highly effective, and up to 99% dye removal was achieved for coagulant doses in the range of 300-1500 mg/L. It was also observed that coagulation is pH sensitive, similar to chemical coagulants. Although the biocoagulant dose is relatively higher than the conventional chemical coagulants, a good value for the sludge volume index, similar to 50 mL/g for 1 h and 30 min, respectively, was obtained for the two coagulants, Acanthocereus tetragonus and Moringa oleifera. A very high particle count compared to chemical coagulants was observed using a focused beam reflectance measurement. Bioformulation with chemical coagulants such as alum, ferric, and aluminum based coagulants can, not only lower doses of biocoagulants (up to one-third) but can also result in significant improvement in the coagulation performance, up to 50% or more.

10acoagulation10adye removal10aEffluent treatment10aflocculation10apollution1 aChethana, M.1 aSorokhaibam, Laxmi, Gayatri1 aBhandari, Vinay, M.1 aRaja, S.1 aRanade, Vivek, V. uhttps://library.ncl.res.in/content/green-approach-dye-wastewater-treatment-using-biocoagulants03284nas a2200289 4500008004100000022001400041245012400055210006900179260000800248300001400256490000700270520233000277653001302607653001902620653001602639653002002655653001902675653001302694100002502707700002602732700002102758700002302779700002602802700001802828700002802846856012002874 2019 eng d a0885-328200aClopidogrel eluting electrospun polyurethane/polyethylene glycol thromboresistant, hemocompatible nanofibrous scaffolds0 aClopidogrel eluting electrospun polyurethanepolyethylene glycol  cMAY a1327-13470 v333 a

Biomaterials used as blood-contacting material must be hemocompatible and exhibit lower thrombotic potential while maintaining hemostasis and angiogenesis. With the aim of developing thromboresistant, hemocompatible nanofibrous scaffolds, polyurethane/polyethylene glycol scaffolds incorporated with 1, 5, and 10 wt% Clopidogrel were fabricated and evaluated for their physiochemical properties, biocompatibility, hemocompatibility, and antithrombotic potential. The results of physicochemical characterization revealed the fabrication of nanometer-sized scaffolds with smooth surfaces. The incorporation of both polyethylene glycol and Clopidogrel to polyurethane enhanced the hydrophilicity and water uptake potential of polyurethane/polyethylene glycol/Clopidogrel scaffolds. The dynamic mechanical analysis revealed the enhancement in mechanical strength of the polyurethane/polyethylene glycol scaffolds on incorporation of Clopidogrel. The polyurethane/polyethylene glycol/Clopidogrel scaffolds showed a tri-phasic drug release pattern. The results of hemocompatibility assessment demonstrated the excellent blood compatibility of the polyurethane/polyethylene glycol/Clopidogrel scaffolds, with the developed scaffolds exhibiting lower hemolysis, increased albumin and plasma protein adsorption while reduction in fibrinogen adsorption. Further, the platelet adhesion was highly suppressed and significant increase in coagulation period was observed for Clopidogrel incorporated scaffolds. The results of cell adhesion and cell viability substantiate the biocompatibility of the developed nanofibrous scaffolds with the HUVEC cell viability on polyurethane/polyethylene glycol, polyurethane/polyethylene glycol/Clopidogrel-1, 5, and 10% at day 7 found to be 12.35, 13.36, 14.85, and 4.18% higher as compared to polyurethane scaffolds, and the NIH/3T3 cell viability found to be 35.27, 70.82, 36.60, and 7.95% higher as compared to polyurethane scaffolds, respectively. Altogether the results of the study advocate the incorporation of Clopidogrel to the polyurethane/polyethylene glycol blend in order to fabricate scaffolds with appropriate antithrombotic property, hemocompatibility, and cell proliferation capacity and thus, might be successfully used as antithrombotic material for biomedical application.

10aadhesion10acardiovascular10acoagulation10aelectrospinning10aHemocompatible10aplatelet1 aShitole, Ajinkya, A.1 aGiram, Prabhanjan, S.1 aRaut, Piyush, W.1 aRade, Priyanka, P.1 aKhandwekar, Anand, P.1 aSharma, Neeti1 aGarnaik, Baijayantimala uhttps://library.ncl.res.in/content/clopidogrel-eluting-electrospun-polyurethanepolyethylene-glycol-thromboresistant01730nas a2200241 4500008004100000022001400041245008400055210006900139260000800208300000800216490000800224520096300232653001801195653002301213653001601236653002201252653002501274100001801299700002001317700001901337700002001356856011201376 2024 eng d a0049-697900aApplication of eco-friendly cationic celluloses for effective sludge dewatering0 aApplication of ecofriendly cationic celluloses for effective slu cJUN a3880 v2353 a

The study presents the application of cationic celluloses in sludge dewatering. The source of cellulose used in this study were microcrystalline cellulose and alkaline-treated rice straw. The cationic celluloses were synthesized in a two-step reaction involving oxidation of cellulose with sodium periodate and followed by Schiff base reaction with Girard reagent T to introduce quaternary ammonium cations. The functional groups and chemical structure were confirmed by FTIR and NMR spectroscopy. The molecular weight and cationicity index of cationic cellulose were determined. Owing to their low molecular weight, the cationic celluloses functioned as coagulants and brought about charge neutralization through electric patches. The cationic celluloses were effective in promoting rapid sludge settling and improving the sludge filterability. The cationic celluloses are eco-friendly and non-toxic alternatives to acrylamide-based flocculants.

10abiodegradable10aCationic cellulose10acoagulation10aSludge dewatering10aWastewater treatment1 aMenon, Snehal1 aSuresha, P., R.1 aKhairnar, Ajay1 aKalyanraman, V. uhttps://library.ncl.res.in/content/application-eco-friendly-cationic-celluloses-effective-sludge-dewatering