02186nas a2200241 4500008004100000022001400041245006900055210006800124260007300192300001200265490000700277520138700284653002001671653001801691653001201709653001801721100002001739700002001759700001701779700002201796700002301818856010301841 2009 eng d a0928-493100aPolymer-embedded stannic oxide nanoparticles as humidity sensors0 aPolymerembedded stannic oxide nanoparticles as humidity sensors aPO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSbELSEVIER SCIENCE BVcAPR a847-8500 v293 a

Stannic oxide (SnO(2)) nanoparticles have been suspended in polyvinyl alcohol (PVA) matrix in different PVA: SnO(2) molar ratios ranging from 1:1 to 1:5 using simple chemical route. This suspension was deposited on ceramic substrate and upon drying was carefully detached from the substrate. SnO(2)-embedded self-standing, transparent and flexible thin films were hence synthesized. Transmission electron microscopy (TEM) and Xray diffraction (XRD) techniques show the rutile tetragonal structure of SnO(2) with particle size similar to 5 nm. UV-Visible spectroscopy demonstrates the band gap of 3.9 eV, which does not alter when embedded in polymer. Fourier transform infrared spectroscopy (FTIR) reveals that the properties of SnO(2) do not modify due to incorporation in the PVA matrix. The structures work as excellent humidity sensors at room temperature. For a critical PVA:SnO(2) molar ratio of 1:3, the resistance changes to five times of magnitude in 92% humidity within fraction of second when compared with resistance at 11% humidity. The sample regains its original resistance almost instantaneously after being removed from humid chamber. Nanodimensions of SnO(2) particles and percolation mechanism related to transport through polymer matrix and water molecule as a carrier has been used to understand the mechanism. (C) 2008 Elsevier B.V. All rights reserved.

10ahumidity sensor10aNanoparticles10aPolymer10aStannic oxide1 aHatamie, Shadie1 aDhas, Vivek, V.1 aKale, B., B.1 aMulla, Imtiaz, S.1 aKale, Sangeeta, N. uhttps://library.ncl.res.in/content/polymer-embedded-stannic-oxide-nanoparticles-humidity-sensors-002357nas a2200241 4500008004100000022001400041245010200055210006900157260006900226300001200295490000800307520148900315653002301804653003001827653002001857653003301877653000801910100001901918700002001937700001801957700001801975856012201993 2014 eng d a0925-400500aHumidity-sensing studies of cerium oxide nanoparticles synthesizedby non-isothermal precipitation0 aHumiditysensing studies of cerium oxide nanoparticles synthesize aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcNOV a229-2380 v2033 a

We report the fabrication of a highly sensitive and fast humidity sensor based on cerium oxide (CeO2) nanoparticles, which were prepared at low cost via a simple non-isothermal precipitation method. The asprepared CeO2 nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy( TEM) and the results indicated the formation of face centered cubic phase of CeO2 with average crystallite size of approximately 10-12 nm. Humidity sensors based on CeO2 nanoparticles exhibit high and linear response within the whole relative humidity (RH) range of 11-97% at an operating frequency of 60 Hz. The corresponding impedance changes by approximately three orders of magnitude within the entire humidity range from 11% to 97% RH. The response and recovery times are about 2-3 and 9-10 s, respectively, when RH was switched between 11% and 97%. Furthermore, the sensors also show relatively small hysteresis, excellent reproducibility, long term stability and broad range of operation (11-97% RH). The complex impedance spectra of the sensor at different RHs and the equivalent circuit were analyzed to explore the humidity-sensing mechanism. This study demonstrates that the CeO2 nanoparticles prepared by non-precipitation method can be used as the humidity-sensing material for the fabrication of humidity sensors. (C) 2014 Elsevier B. V. All rights reserved.

10aCeO2 nanoparticles10aComplex impedance spectra10ahumidity sensor10aNon-isothermal precipitation10aTEM1 aKhadse, V., R.1 aThakur, Sharada1 aPatil, K., R.1 aPatil, Pradip uhttps://library.ncl.res.in/content/humidity-sensing-studies-cerium-oxide-nanoparticles-synthesizedby-non-isothermal-002462nas a2200253 4500008004100000022001400041245013900055210006900194260007100263300001400334490000600348520151800354653003001872653002001902653001701922653001601939653001401955653002301969100002201992700002502014700002402039700002402063856012102087 2016 eng d a1944-824400aHighly transparent wafer-scale synthesis of crystalline WS2 nanoparticle thin film for photodetector and humidity-sensing applications0 aHighly transparent waferscale synthesis of crystalline WS2 nanop a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcFEB a3359-33650 v83 a

In the present investigation, we report a one-step synthesis method of wafer-scale highly crystalline tungsten disulfide (WS2) nanoparticle thin film by using a modified hot wire chemical vapor deposition (HW-CVD) technique. The average size of WS2 nanoparticle is found to be 25-40 nm over an entire 4 in. wafer of quartz substrate. The low-angle XRD data of WS2 nanoparticle shows the highly crystalline nature of sample along with orientation (002) direction. Furthermore, Raman spectroscopy shows two prominent phonon vibration modes of E12g and A1g at similar to 356 and similar to 420 cm(-1), respectively, indicating high purity of material. The TEM analysis shows good crystalline quality of sample. The synthesized WS2 nanoparticle thin film based device shows good response to humidity and good photosensitivity along with good long-term stability of the device. It was found that the resistance of the films decreases with increasing relative humidity (RH). The maximum humidity sensitivity of 469% along with response time of similar to 12 s and recovery time of similar to 13 s were observed for the WS2 thin film humidity sensor device. In the case of photodetection, the response time of similar to 51 s and recovery time of similar to 88 s were observed with sensitivity similar to 137% under white light illumination. Our results open up several avenues to grow other transition metal dichalcogenide nanoparticle thin film for large-area nanoelectronics as well as industrial applications.

10achemical vapor deposition10ahumidity sensor10ananoparticle10aphotosensor10athin film10atungsten disulfide1 aPawbake, Amit, S.1 aWaykar, Ravindra, G.1 aLate, Dattatray, J.1 aJadkar, Sandesh, R. uhttps://library.ncl.res.in/content/highly-transparent-wafer-scale-synthesis-crystalline-ws2-nanoparticle-thin-film-001953nas a2200217 4500008004100000022001400041245013300055210006900188260007100257300001600328490000600344520109300350653002101443653003201464653002001496653001801516100002401534700002401558700002401582856012901606 2016 eng d a1944-824400aHumidity sensing and photodetection behavior of electrochemically exfoliated atomically thin-layered black phosphorus nanosheets0 aHumidity sensing and photodetection behavior of electrochemicall a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcMAY a11548-115560 v83 a

Recent investigations on two-dimensional black phosphorus material mainly highlight work on few atomic layers and multilayers. It is still unknown if the black phosphorus atomically thin sheet is an ideal structure for the enhanced gas solid interactions due to its large surface area. To further investigate this concern, we have synthesized few atomic layer thick nanosheets of black phosphorus using an electrochemical exfoliation method. The surface morphology and thickness of the nanosheet were identified using AFM, TEM, and Raman spectroscopy. The black phosphorus nanosheet thick film device was used for the gas sensing application with exposure to different humidites. Further, the few layer black phosphorus nanosheet based transistor shows good mobility and on/off ratio. The UV light irradiation on the black phosphorus nanosheet shows good response time. The overall results show that the few layer thick film of black phosphorus nanosheets sample exhibits creditable sensitivity and better recovery time to be used in humidity sensor and photodetector applications.

10ablack phosphorus10aelectrochemical exfoliation10ahumidity sensor10aphotodetector1 aErande, Manisha, B.1 aPawar, Mahendra, S.1 aLate, Dattatray, J. uhttps://library.ncl.res.in/content/humidity-sensing-and-photodetection-behavior-electrochemically-exfoliated-atomically-thin02586nas a2200325 4500008004100000022001400041245011200055210006900167260000800236300001200244490000800256520159300264653002001857653001301877653001801890653000801908653000801916100001601924700002001940700001801960700002101978700002401999700001902023700001902042700001702061700002002078700001802098700002002116856012402136 2019 eng d a1862-630000aSolvothermal growth of PbBi2Se4 nano-flowers: a material for humidity sensor and photodetector applications0 aSolvothermal growth of PbBi2Se4 nanoflowers a material for humid cJUN a19000650 v2163 a

In the present work, lead bismuth selenide (PbBi2Se4) nano-flowers are synthesized by using a simple solvothermal method. Humidity sensor and photodetector based on PbBi2Se4 nano-flowers are fabricated on indium tin oxide (ITO) substrates and their sensing properties are investigated. Formation of PbBi2Se4 is confirmed by XRD, EDS, and XPS whereas formation of nano-flowers is confirmed by SEM and TEM analysis. XRD analysis reveals the hexagonal crystal structure of PbBi2Se4 phase with a = b = 4.22 angstrom, and c= 17.42 angstrom. The surface morphology of PbBi2Se4 clearly shows the formation of well-organized flower-like nanostructures which closely resembles the shape of Dahlia. The elemental mapping of chemical constituents obtained from SEM-EDS analysis shows uniform distribution of chemical constituents for the Pb, Bi, and Se in PbBi2Se4 nano-flowers. The PbBi2Se4 nano-flowers based humidity sensor has a typical response time of approximate to 65s and recovery time of approximate to 75 s. In case of PbBi2Se4 nano-flowers-based photodetector, the response and recovery time are observed approximate to 121 and approximate to 123 s, respectively, under visible light illumination with photoresponsivity (5 x 10(-6)), photosensitivity (2.16%), and quantum efficiency (1.5 x 10(4)). The obtained results demonstrate the potential applications of solvothermally grown PbBi2Se4 nano-flowers-based devices for humidity sensors and photodetectors. The ease of the present work is to develop novel material to obtain device quality humidity sensors and photodetectors.

10ahumidity sensor10aPbBi2Se410aphotodetector10aXPS10aXRD1 aAher, Rahul1 aBhorde, Ajinkya1 aNair, Shruthi1 aBorate, Haribhau1 aPandharkar, Subhash1 aNaik, Dhirsing1 aVairale, Priti1 aKarpe, Smita1 aLate, Dattatray1 aPrasad, Mohit1 aJadkar, Sandesh uhttps://library.ncl.res.in/content/solvothermal-growth-pbbi2se4-nano-flowers-material-humidity-sensor-and-photodetector02932nas a2200241 4500008004100000022001400041245009600055210006900151260000800220300001000228490000800238520213400246653002002380653001502400653001502415653001902430100002502449700002202474700002302496700002402519700002202543856012502565 2019 eng d a0925-400500aSuperior humidity sensor and photodetector of mesoporous ZnO nanosheets at room temperature0 aSuperior humidity sensor and photodetector of mesoporous ZnO nan cAUG a83-920 v2933 a

Miniaturized sensor technology is vastly demanding multifunctional materials to fulfill many requirements simultaneously; instead of integrating various sensors into a single device. Efficient operation of these miniaturized sensors at room temperature is highly feasible and cost-effective. The humidity sensing and photodetection is precise merit of sensing in special usage like artificial skin. Sensitivity enhancement in both humidity and photodetection required the high surface area for adsorption as well as a high charge transfer mechanism. The two dimensional (2D) zinc oxide nanosheets (ZnO NS) is the ultimate structure for dimensionally confined transport properties owing to the specific surface atomic configuration that results in high sensitivity, low operating temperature, fast response and recovery, and improved selectivity. Furthermore, introducing porosity into 2D nanostructures has opened new opportunities to enhance the efficiency of sensors and detectors via increasing large surface area and tunable physical and chemical properties. Here we report preparation of mesoporous and highly crystalline 2D ZnO NS by a single step, template free, cost-effective chemical method. The structural and morphological characterizations of ZnO NS are carried out using XRD, FESEM, XPS, TEM respectively. The high-resolution TEM images emphasize sheet-like morphology with a thickness of around 18-22 nm. Further the mesoporous ZnO NS (MZNS) with the pore size between 5-10 nm are achieved by simple heat-treatment. XPS and PL study is confirming the oxygen deficiency in MZNS. The MZNS exhibits an excellent responsivity than PZNS with a fast response and rapid recovery time of 25 s and 5 s respectively along with good cyclic stability which is highly crucial for smart humidity sensor. Furthermore, it considerably enhances photo-sensor performance than pristine ZnO NS (PZNS) with (similar to)1 s response time as well as (similar to)1 s recovery time along with better stability. These promising results illustrate the great potential of MZNS for next-generation humidity sensors and photodetectors.

10ahumidity sensor10aMesoporous10ananosheets10aPhoto-detector1 aGupta, Shobhnath, P.1 aPawbake, Amit, S.1 aSathe, Bhaskar, R.1 aLate, Dattatray, J.1 aWalke, Pravin, S. uhttps://library.ncl.res.in/content/superior-humidity-sensor-and-photodetector-mesoporous-zno-nanosheets-room-temperature