02350nas a2200241   4500008004100000022001400041245013100055210006900186260007100255300001400326490000600340520141500346653003301761653001901794653002001813653002601833653003001859653002401889653001901913100002401932700002401956856012801980       2015                        eng d  a2155-543500aCu-Pt nanocage with 3-D electrocatalytic surface as an efficient oxygen reduction electrocatalyst for a primary Zn-air battery0 aCuPt nanocage with 3D electrocatalytic surface as an efficient o  a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcMAR  a1445-14520 v53 a<p>Cu-Pt nanocage (CuPt-NC) intermetallic structures have been prepared by an in situ galvanic displacement reaction. The structures are found to be well organized within the framework demarcated with distinguishing arms, having clear edges and corners with a size of similar to 20 nm. The unique nanocage structure possessing large specific surface area and better structural integrity helps to achieve improved electrochemical oxygen reduction reaction activity and stability in alkaline solution in comparison to the commercially available 20 wt % Pt/C. CuPt-NC shows 50 mV positive onset potential shift with significantly higher limiting current in comparison to Pt/C. Interestingly, CuPt-NC has shown 2.9- and 2.5-fold improved mass activity and specific activity, respectively, for ORR at 0.9 V vs RHE in comparison to Pt/C. Moreover, the stability of CuPt-NC has been tested by an accelerated durability test under alkaline conditions. CuPt-NC has been subsequently utilized as the air electrode in a primary Zn-air battery and is found to possess 1.30- and 1.34-fold improved power density and current density at 1 V, respectively, in comparison to the state-of-the-art Pt/C catalyst. In addition, CuPt-NC has shown several hours of constant discharge stability at 20 mA cm(-2) with a specific capacity of 560 mAh gZn(-1) and energy density of 728 Wh kgZn(-1) in the primary Zn-air battery system.</p>10a3-D electrocatalytic surface10aCu-Pt nanocage10aelectrocatalyst10agalvanic displacement10aoxygen reduction reaction10asolvothermal method10aZn-air battery1 aDhavale, Vishal, M.1 aKurungot, Sreekumar  uhttps://library.ncl.res.in/content/cu-pt-nanocage-3-d-electrocatalytic-surface-efficient-oxygen-reduction-electrocatalyst-002901nas a2200301   4500008004100000022001400041245013800055210006900193260000800262300001400270490000600284520183300290653003802123653002502161653002402186653003002210653002802240653001902268100002302287700002402310700002102334700002802355700001502383700002302398700002202421700002502443856013102468       2017                        eng d  a2155-543500aEfficient and durable oxygen reduction electrocatalyst based on CoMn alloy oxide nanoparticles supported over N-doped porous graphene0 aEfficient and durable oxygen reduction electrocatalyst based on   cOCT  a6700-67100 v73 aTransition metal oxide derived materials are very important for various applications, such as electronics, magnetism, catalysis, electrochemical energy conversion, and storage. Development of efficient and durable catalysts for the oxygen reduction reaction (ORR), an important reaction in fuel cells and metal air batteries, is highly desirable. Moreover, the futuristic catalysts for these applications need to be costeffective in order to ensure a competitive edge for these devices in the energy market. This article describes the synthesis of a cost-effective and efficient electrocatalyst for ORR It is based on supporting CoMn alloy oxide nano particles on N-doped porous graphene through a simple and scalable microwave irradiation method. Microwave irradiation was found to be very crucial for the fast creation of pores in the graphene framework with a concomitant formation of the CoMn alloy oxide nanoparticles. A series of catalysts have been synthesized by varying the Co:Mn ratio, among which, the one with the Co:Mn ratio of 2:1 [designated as CoMn/pNGr(2:1)] displayed remarkably higher ORR activity in 0.1 M KOH solution. It showed a similar to 60 mV potential shift with a low Tafel slope of 74 mV/decade, which is comparable to that derived from the commercial Pt/C catalyst. This high activity of CoMn/pNGr(2:1) has been credited to the cooperative effect arising from the metal entities and the defects present in the N-doped porous graphene. Finally, real system-level validations of the use of CoMn/pNGr(2:1) as cathode catalyst could be performed by fabricating and testing single-cells of an anion-exchange membrane fuel cell (AEMFC) and a primary Zn-air battery, which successfully demonstrated the efficiency of the catalyst to facilitate ORR in real integrated systems of the single-cell assemblies.10aanion-exchange membrane fuel cell10acooperativity effect10amicrowave synthesis10aoxygen reduction reaction10aporous N-doped graphene10aZn-air battery1 aSingh, Santosh, K.1 aKashyap, Varchaswal1 aManna, Narugopal1 aBhange, Siddheshwar, N.1 aSoni, Roby1 aBoukherroub, Rabah1 aSzunerits, Sabine1 aKurungot, Sreekurnar  uhttps://library.ncl.res.in/content/efficient-and-durable-oxygen-reduction-electrocatalyst-based-comn-alloy-oxide-nanoparticles