02316nas a2200193 4500008004100000245013900041210006900180260000800249300001400257490000700271520160300278653001101881653001301892653001901905100002201924700001701946700002801963856013101991 2017 eng d00aHealable network polymers bearing flexible poly(Lauryl Methacrylate) chains via thermo-reversible furan-maleimide diels-alder reaction0 aHealable network polymers bearing flexible polyLauryl Methacryla cAUG a2700-27120 v553 aA new ATRP initiator containing two furyl rings, namely, bis(furan-2-ylmethyl) 2-bromopentanedioate was synthesized starting from commercially available L-glutamic acid as a precursor. Well-defined bisfuryl-terminated poly(lauryl methacrylate) macromonomers with molecular weight and dispersity in the range 5000-12,000 g mol(-1) and 1.30-1.37, respectively, were synthesized employing the initiator by atom transfer radical polymerization (ATRP). Independently, 1,1',1"(nitrilotris(ethane-2,1-diyl)) tris(1H-pyrrole-2,5-dione) was synthesized as a tris-maleimide counterpart for furan-maleimide click reaction. Thermo-reversible network polymer bearing flexible poly(lauryl methacrylate; (PLMA) chains was obtained by furan-maleimide Diels-Alder click reaction of bisfurylterminated PLMA with 1,1',1"-(nitrilotris(ethane-2,1-diyl)) tris(1Hpyrrole-2,5-dione). The prepared network polymer showed retro-Diels-Alder reaction in the temperature range 110-170 degrees C as determined from DSC analysis. The presence of low Tg (-40 degrees C) PLMA chains induced chain mobility to the network structure which led to the complete scratch healing of the coating at 60 degrees C in five days due to furan-maleimide adduct formation. The storage modulus of the network polymer was found to be 3.7 x 10(4) Pa at the constant angular frequency of 5 rad/ sec and strain of 0.5%. The regular reversal of storage (G0) and loss modulus (G") was observed with repeated heating (40 to 110 degrees C) and cooling cycles (110 to 40 degrees C) at constant angular frequency and strain. (C) 2017 Wiley Periodicals, Inc.10aethane10aMonomers10apolymerization1 aPatil, Sachin, S.1 aTorris, Arun1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/healable-network-polymers-bearing-flexible-polylauryl-methacrylate-chains-thermo-reversible02445nas a2200241 4500008004100000022001400041245013500055210006900190260000900259300001600268490000700284520158700291653002901878653002201907653001901929653001801948100001501966700002101981700001702002700002702019700003102046856012602077 2021 eng d a0272-884200aHighly compressible ceramic/polymer aerogel-based piezoelectric nanogenerators with enhanced mechanical energy harvesting property0 aHighly compressible ceramicpolymer aerogelbased piezoelectric na cJUN  a15750-157580 v473 a

Ceramic piezoelectric materials have orders of magnitude higher piezoelectric coefficients compared to polymers. However, their brittleness precludes imposition of large strains in mechanical energy harvesting applications. We report here that ice templating affords low bulk modulus lead-free aerogel piezoelectric nanogenerators (PENG) with unprecedented combination of flexibility and high piezoelectric response (voltage and power density). A modified ice templating protocol was used to fabricate piezoelectric nanocomposites of surface modified BaTiO3 (BTO) nanoparticles in crosslinked polyethylene imine. This protocol allowed incorporating a significantly high fraction of BTO particles (up to 83 wt %) in the aerogel, while retaining remarkably high compressibility and elastic recovery up to 80% strain. The output voltage, at an applied compressive force of 20 N (100 kPa), increased with BTO loading and a maximum output voltage of 11.6 V and power density of 7.22 ?W/cm2 (49.79 ?W/cm3) was obtained for PENG aerogels containing 83 wt% BTO, which is orders of magnitude higher than previously reported values for foam-based piezoelectric energy harvesters. The BTO/PEI PENGs also showed cyclic stability over 900 cycles of deformation. PENGs with higher porosity showed better elastic recovery and piezoelectric properties than lower porosity and higher BTO content aerogels. To the best of our knowledge, this is the first report to demonstrate the piezoelectric properties of high ceramic content aerogels having very high compressibility and elastic recovery.

10aCeramic polymer aerogels10aenergy harvesting10aice templating10apiezoelectric1 aRam, Farsa1 aSuresh, Karthika1 aTorris, Arun1 aKumaraswamy, Guruswamy1 aShanmuganathan, Kadhiravan uhttps://library.ncl.res.in/content/highly-compressible-ceramicpolymer-aerogel-based-piezoelectric-nanogenerators-enhanced02677nas a2200265 4500008004100000022001400041245008300055210006900138260000900207300001400216490000700230520184900237100001902086700001602105700001702121700002502138700001602163700001702179700001602196700001902212700002602231700002002257700002002277856011402297 2023 eng d a2041-652000aHierarchical covalent organic framework-foam for multi-enzyme tandem catalysis0 aHierarchical covalent organic frameworkfoam for multienzyme tand cJUN  a6643-66530 v143 a

Covalent organic frameworks (COFs) are ideal host matrices for biomolecule immobilization and biocatalysis due to their high porosity, various functionalities, and structural robustness. However, the porosity of COFs is limited to the micropore dimension, which restricts the immobilization of enzymes with large volumes and obstructs substrate flow during enzyme catalysis. A hierarchical 3D nanostructure possessing micro-, meso-, and macroporosity could be a beneficial host matrix for such enzyme catalysis. In this study, we employed an in situ CO2 gas effervescence technique to induce disordered macropores in the ordered 2D COF nanostructure, synthesizing hierarchical TpAzo COF-foam. The resulting TpAzo foam matrix facilitates the immobilization of multiple enzymes with higher immobilization efficiency (approximately 1.5 to 4-fold) than the COF. The immobilized cellulolytic enzymes, namely beta-glucosidase (BGL), cellobiohydrolase (CBH), and endoglucanase (EG), remain active inside the TpAzo foam. The immobilized BGL exhibited activity in organic solvents and stability at room temperature (25 degrees C). The enzyme-immobilized TpAzo foam exhibited significant activity towards the hydrolysis of p-nitrophenyl-beta-d-glucopyranoside (BGL@TpAzo-foam: K-m and V-max = 23.5 +/- 3.5 mM and 497.7 +/- 28.0 mu M min(-1)) and carboxymethylcellulose (CBH@TpAzo-foam: K-m and V-max = 18.3 +/- 4.0 mg mL(-1) and 85.2 +/- 9.6 mu M min(-1) and EG@TpAzo-foam: K-m and V-max = 13.2 +/- 2.0 mg mL(-1) and 102.2 +/- 7.1 mu M min(-1)). Subsequently, the multi-enzyme immobilized TpAzo foams were utilized to perform a one-pot tandem conversion from carboxymethylcellulose (CMC) to glucose with high recyclability (10 cycles). This work opens up the possibility of synthesizing enzymes immobilized in TpAzo foam for tandem catalysis.

1 aPaul, Satyadip1 aGupta, Mani1 aDey, Kaushik1 aMahato, Ashok, Kumar1 aBag, Saikat1 aTorris, Arun1 aGowd, Bhoje1 aSajid, Hasnain1 aAddicoat, Matthew, A.1 aDatta, Supratim1 aBanerjee, Rahul uhttps://library.ncl.res.in/content/hierarchical-covalent-organic-framework-foam-multi-enzyme-tandem-catalysis02738nas a2200289 4500008004100000022001400041245016500055210006900220260000800289300001100297490000700308520168400315653002501999653003302024653002402057653004502081653003402126653002702160100002002187700002202207700001902229700001702248700002202265700002602287700000502313856013002318 2023 eng d a2352-152X00aHigh rate, high temperature, dendrite free plating/stripping of Li in 3-dimensional honeycomb boron carbon nitride to realize an ultrastable lithium metal anode0 aHigh rate high temperature dendrite free platingstripping of Li  cSEP a1075470 v683 a

Lithium (Li) metal could be the anode of choice for energy dense Li-batteries owing to its high theoretical specific capacity. However, low coulombic efficiency and poor safety on account of the occurrence of the Li-dendrites during charging-discharging pose a bottleneck for practical applications. In this work, we report a high-rate plating and stripping of Li through host engineering to realize ultrastable Li metal anode (LMA). Benchmark plating/stripping efficiency could be achieved via uniquely structured, highly ordered honeycomb boron carbon nitride (HBCN) as a functional scaffold. Boron and nitrogen doping, large surface area and ordered mesoporous structure induce homogeneous solid electrolyte interface (SEI) layer formation and provide numerous nucleation sites with subsequent dendrite-free growth with 99.98 % coulombic efficiency at 8 mA cm(-2) high current and 10 mAh cm(-2) capacity over 3000 cycles. Via post-cycling advanced characterizations techniques of Ex-situ XPS, 3D X-ray micro-tomography analyses and FESEM, we demonstrate the formation of a stable SEI layer and morphological changes that occurred during Li plating cycles in the HBCN structure. Computational studies validate the high lithium plating-stripping efficacy of HBCN to its highly ordered porous nature, exothermic Li-binding and upshift in the Fermi levels. When tested at elevated temperature (50 degrees C), a stable Li plating-stripping in HBCN is realised at 4 mA cm(-2) current and 10 mAh cm(-2) capacity values with similar to 100 % C.E. Furthermore, we report the results of testing a Li metal cell comprised of Li deposited HBCN anode and LiFePO4 (LFP) cathode.

10aBoron carbon nitride10aDendrite-free Li metal anode10aFunctional scaffold10aHigh temperature plating/stripping of Li10aMolecular planarity parameter10aX-ray micro-tomography1 aPatrike, Apurva1 aKarbhal, Indrapal1 aWasnik, Kundan1 aTorris, Arun1 aMaibam, Ashakiran1 aKrishnamurty, Sailaja1 a uhttps://library.ncl.res.in/content/high-rate-high-temperature-dendrite-free-platingstripping-li-3-dimensional-honeycomb-boron02205nas a2200253 4500008004100000022001400041245009700055210006900152260000800221490000800229520133700237653002901574653003401603653000901637653001401646653002101660100002801681700002701709700001701736700002201753700002401775700002501799856012701824 2026 eng d a0021-899500aHigh-performance sultone-modified PVA/PAMPS semi-IPN hydrogels for proton exchange membranes0 aHighperformance sultonemodified PVAPAMPS semiIPN hydrogels for p cAPR0 v1433 a

Hydrogel membranes composed of poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) and sultone-modified poly(vinyl alcohol) (PVA) were successfully synthesized and evaluated as promising proton-conducting materials. A key advantage involves the premodification of PVA with 1,3-propane sultone to introduce sulfonic acid groups, thereby imparting proton conductivity to the PVA backbone. This sultone-modified PVA was then physically entangled within a PAMPS cross-linked network to form novel semi-interpenetrating network (semi-IPN) hydrogels. This synergistic design leverages the excellent film-forming and mechanical properties of PVA with the high proton conductivity inherent to PAMPS. The synthesized membranes exhibited robust mechanical properties, with tensile strengths ranging from 5 to 30 MPa and percentage elongations between 200% and 400%, depending on their humidity content. These hydrogel membranes demonstrated proton conductivities ranging from 0.6 to 4.3 x 10-2 S cm-1. The activation energy for proton conduction was found to be as low as 3.5 kJ mol-1, significantly lower than that of the commercial benchmark membrane, Nafion 117 (12 kJ mol-1). These findings underscore the potential of these novel PAMPS/sultone-modified PVA semi-IPN hydrogel membranes for advanced fuel cell applications.

10abatteries and fuel cells10afunctionalization of polymers10aGels10amembranes10apolyelectrolytes1 aPatwadkar, Manjusha, V.1 aIllathvalappil, Rajith1 aTorris, Arun1 aFrancis, Sifa, C.1 aKurungot, Sreekumar1 aBadiger, Manohar, V. uhttps://library.ncl.res.in/content/high-performance-sultone-modified-pvapamps-semi-ipn-hydrogels-proton-exchange-membranes