02309nas a2200313   4500008004100000022001400041245009600055210006900151260000800220300001400228490000700242520130500249653001601554653001401570653001701584653001801601653002201619653001401641100003101655700002001686700002601706700001701732700002301749700001901772700002001791700002901811700003101840856012401871       2023                        eng d  a0032-388800aLuminescent 3D printed poly(lactic acid) nanocomposites with enhanced mechanical properties0 aLuminescent 3D printed polylactic acid nanocomposites with enhan  cJUL  a2059-20720 v633 a<p>
	The three-dimensional (3D) printing of functional composite materials has gained tremendous interest in recent years. Nevertheless, research on 3D printing of luminescent composite materials is very limited, and the mechanical properties of such 3D-printed composites are poor. Herein, we report the preparation and characterization of a poly(lactic acid) (PLA) composite that, when 3D printed, exhibits enhanced toughness and high solid-state fluorescence quantum yield. Incorporation of only 1 wt% pyrene butyric acid modified cellulose nanofibers (PBA-m-CNF) and l0 wt% thermoplastic polyurethane (TPU) into PLA led to 223% increase in toughness and 21% increase in tensile modulus of PLA. Scanning electron microscopy (SEM) and X-ray microcomputed tomography (mu-CT) analysis of the fractured cross-sections of 3D printed composites revealed a ductile failure mode. The PLA/PBA-m-CNF1/TPU10 3D printed composite also exhibited a high solid-state fluorescence quantum yield of 38.35%. To the best of our knowledge, this is the first report to show both enhanced mechanical properties and high solid-state fluorescence emission for 3D printable PLA. Such functional PLA composites could have potential applications in the fabrication of complex-shaped sensors, optical light pipes, etc.</p>
10a3D printing10aComposite10afluorescence10aNanocellulose10apoly(lactic acid)10atoughness1 aKothavade, Premkumar, Anil1 aYadav, Prashant1 aNidhankar, Aakash, D.1 aTorris, Arun1 aPol, Harshawardhan1 aKafi, Abdullah1 aBateman, Stuart1 aSukumaran, Santosh, Babu1 aShanmuganathan, Kadhiravan  uhttps://library.ncl.res.in/content/luminescent-3d-printed-polylactic-acid-nanocomposites-enhanced-mechanical-properties02655nas a2200289   4500008004100000022001400041245008500055210006900140260000800209490000800217520171400225653001601939653003101955653002201986653001602008653001302024100002902037700002502066700001802091700002302109700002002132700002202152700002302174700003102197700001702228856012002245       2026                        eng d  a1022-135200aVanillin-based recyclable thermosets and their glass fiber reinforced composites0 aVanillinbased recyclable thermosets and their glass fiber reinfo  cJAN0 v2273 a<p>
	The accumulation of end-of-life plastic materials and composite reinforcement waste materials has brought much attention to developing sustainable alternatives and their re-processability. Incorporating covalent adaptable networks (CANs) into the crosslinked network bridges the concept of reversibility into the otherwise conventional non-reversible networks. This study investigates the structure-property relation in two reversible hardener systems derived from vanillin using Schiff base chemistry. The ``CAN'' systems were synthesized by condensation of vanillin with two amines, 4,4'-oxydianiline and tris(2-aminoethyl)amine, respectively, to form Va_ODA and Va_TAEA. The epoxy thermosets exhibited glass transition temperatures (T-g) of 125 degrees C and 115 degrees C, respectively, for Va_ODA and Va_TAEA, which is superior to most reversible vanillin-based systems reported. The vitrimer-thermosets exhibited promising mechanical and thermal properties, and reshaping abilities as a function of applied temperatures, indicating the dynamic nature of linkages. Chemical degradability was demonstrated by heating to 80 degrees C for 12 h in aqueous acidic medium or excess amine. The fabricated glass fiber composites exhibited good mechanical properties with tensile strength of 361 MPa and degradability in acetic acid/water mixture with a fiber recovery of &gt;98 %. The recovered glass fiber exhibited almost similar tensile strength as the virgin glass fiber, demonstrating its potential reusability. The epoxy vitrimers underwent mechanical reprocessing through hot-pressing, as well as chemical reprocessing via 3D printing and by regeneration of imine bonds to form an epoxy resin.</p>
10a3D printing10acovalent adaptable network10are-processability10aSchiff base10aVanillin1 aVeetil, Ashwani, Puthiya1 aRavikumar, Aniruddha1 aRajput, Tejas1 aSingh, Aman, Kumar1 aThakur, Tamanna1 aKrishna, Abhijith1 aPol, Harshawardhan1 aShanmuganathan, Kadhiravan1 aAsha, S., K.  uhttps://library.ncl.res.in/content/vanillin-based-recyclable-thermosets-and-their-glass-fiber-reinforced-composites