02272nas a2200253 4500008004100000022001400041245007000055210006900125260009200194300001000286490000600296520136500302653002101667653003001688653004101718100002301759700001901782700002201801700001801823700002101841700003001862700002201892856010401914 2009 eng d a1947-293500aSynthesis of Sb-doped SnO2 nanowires and hyperbranched structures0 aSynthesis of Sbdoped SnO2 nanowires and hyperbranched structures a26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USAbAMER SCIENTIFIC PUBLISHERScAPR a38-430 v13 a

Branched nanostructures of semiconducting materials are of great interest for their potential applications in optoelectronic, photonic devices and sensors. We herein describe a facile single-step chemical vapor deposition route for the synthesis of Sb-SnO2 hyperbranched nanostructures comprised of elongated nanowires with 30-40 nm diameter and 10-20 Am length. The morphology and structure has been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selective area electron diffraction (SAED), and powder X-ray diffraction (XRD). Also, a possible mechanism is proposed for the growth of nanowires into the hyperbranched form on the basis of the substrate effect, the role of Au nanoparticles, and the effect of Sb doping on specific morphology evolution. Interestingly, electrical conductivity measurements as a function of temperature suggest a semiconducting behavior, despite being governed by different electron-transport mechanisms with activation energies of 0.55 and 0.17 eV, which correspond to pure SnO2 and Sb-SnO2 nanowires, respectively. A precise control over the operating parameters not only envisages custom-designed, branched structures by a simple and economical route but also offers an alternative method to the expensive and tedious nanofabrication techniques for industrial applications.

10aAu Nanoparticles10achemical vapor deposition10aSb-SnO2 Hyperbranched Nanostructures1 aSathe, Bhaskar, R.1 aPatil, Mrudula1 aWalke, Pravin, S.1 aVivek, J., P.1 aLele, Ashish, K.1 aPillai, Vijayamohanan, K.1 aMulla, Imtiaz, S. uhttps://library.ncl.res.in/content/synthesis-sb-doped-sno2-nanowires-and-hyperbranched-structures-002932nas a2200241 4500008004100000022001400041245009600055210006900151260000800220300001000228490000800238520213400246653002002380653001502400653001502415653001902430100002502449700002202474700002302496700002402519700002202543856012502565 2019 eng d a0925-400500aSuperior humidity sensor and photodetector of mesoporous ZnO nanosheets at room temperature0 aSuperior humidity sensor and photodetector of mesoporous ZnO nan cAUG a83-920 v2933 a

Miniaturized sensor technology is vastly demanding multifunctional materials to fulfill many requirements simultaneously; instead of integrating various sensors into a single device. Efficient operation of these miniaturized sensors at room temperature is highly feasible and cost-effective. The humidity sensing and photodetection is precise merit of sensing in special usage like artificial skin. Sensitivity enhancement in both humidity and photodetection required the high surface area for adsorption as well as a high charge transfer mechanism. The two dimensional (2D) zinc oxide nanosheets (ZnO NS) is the ultimate structure for dimensionally confined transport properties owing to the specific surface atomic configuration that results in high sensitivity, low operating temperature, fast response and recovery, and improved selectivity. Furthermore, introducing porosity into 2D nanostructures has opened new opportunities to enhance the efficiency of sensors and detectors via increasing large surface area and tunable physical and chemical properties. Here we report preparation of mesoporous and highly crystalline 2D ZnO NS by a single step, template free, cost-effective chemical method. The structural and morphological characterizations of ZnO NS are carried out using XRD, FESEM, XPS, TEM respectively. The high-resolution TEM images emphasize sheet-like morphology with a thickness of around 18-22 nm. Further the mesoporous ZnO NS (MZNS) with the pore size between 5-10 nm are achieved by simple heat-treatment. XPS and PL study is confirming the oxygen deficiency in MZNS. The MZNS exhibits an excellent responsivity than PZNS with a fast response and rapid recovery time of 25 s and 5 s respectively along with good cyclic stability which is highly crucial for smart humidity sensor. Furthermore, it considerably enhances photo-sensor performance than pristine ZnO NS (PZNS) with (similar to)1 s response time as well as (similar to)1 s recovery time along with better stability. These promising results illustrate the great potential of MZNS for next-generation humidity sensors and photodetectors.

10ahumidity sensor10aMesoporous10ananosheets10aPhoto-detector1 aGupta, Shobhnath, P.1 aPawbake, Amit, S.1 aSathe, Bhaskar, R.1 aLate, Dattatray, J.1 aWalke, Pravin, S. uhttps://library.ncl.res.in/content/superior-humidity-sensor-and-photodetector-mesoporous-zno-nanosheets-room-temperature02609nas a2200193 4500008004100000022001400041245010600055210006900161260000800230300001400238490000700252520191700259100002402176700002402200700002402224700002302248700002202271856012202293 2023 eng d a0022-246100aSize does matter: antibacterial activities and cytotoxic evaluation of polymorphic CuO nanostructures0 aSize does matter antibacterial activities and cytotoxic evaluati cFEB a2782-28000 v583 a

Nanostructured materials play a significant role in antibacterial activities. However, understanding the geometrical influence at the nanoscale in terms of size- and shape-correlated physical properties on antibacterial activities is very essential. Herein, we report the antibacterial influence of various copper oxide nanostructures (CuO NS) such as nanoparticles (NPs) (< 10 nm), nanospheres (NSs) (50-100 nm), and porous nanoflowers (NFs) (asymptotic to 350 nm). The XRD confirmed the crystalline nature of CuO NPs without impurities. The antibacterial activities of CuO NPs were investigated by the microplate dilution method and confocal laser scanning microscopic (CLSM) imaging. NPs having a diameter less than 10 nm exhibited significant damage to the bacterial cell membrane than NSs and NFs. Interestingly, NPs illustrated relatively low antibacterial activity against Gram-negative bacteria (Pseudomonas aeruginosa and Acinetobacter baumannii) than Gram-positive bacteria (Staphylococcus aureus and Staphylococcus epidermidis). Acinetobacter baumannii was found to be more susceptible to the NPs than other bacterial strains, attributed to its increased membrane permeability. The death phase was observed at a concentration of 15.6 mu g mL(-1) and 3.9 mu g mL(-1) for P. aeruginosa and A. baumannii, respectively, when treated with CuO NP after the 8 h of incubation. Similarly, for S. aureus and S. epidermidis, the death phase was observed at the concentration of 31.2 mu g mL(-1) and 250 mu g mL(-1), respectively. Furthermore, as the cell cytotoxicity measurements against human fibroblast L9239 cells revealed that CuO NPs were safe. The morphological and cell viability assay demonstrated 100% cell survival, when treated with NPs and NSs (5, 10, and 25 mu g mL(-1)), signifies no cytotoxicity. Therefore, CuO nanoparticles can be used for clinical and therapeutic applications.

1 aDesai, Dnyanada, G.1 aNavale, Govinda, R.1 aLate, Dattatray, J.1 aDharne, Mahesh, S.1 aWalke, Pravin, S. uhttps://library.ncl.res.in/content/size-does-matter-antibacterial-activities-and-cytotoxic-evaluation-polymorphic-cuo