01922nas a2200205 4500008004100000022001400041245009300055210006900148260007300217300001400290490000800304520115100312653002101463653002201484653001401506653001501520100002801535700003001563856012301593 2008 eng d a0169-433200aEfficient route towards the covalent functionalization of single walled carbon nanotubes0 aEfficient route towards the covalent functionalization of single aPO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSbELSEVIER SCIENCE BVcJUN a4936-49430 v2543 a

A simple and efficient method of chemical functionalization of both single and multiwalled carbon nanotubes has been discussed to give enhanced water solubility by rapidly and efficiently generating an appreciable amount of hydrophilic functional groups using microwave radiation. Surface functionalization containing more than 30 wt% of oxygen has been achieved, resulting into solubility of 2-5 mg/mL. Further covalent functionalization of such soluble SWNTs provides a remarkable degree of aniline functionalization through amidation, where the formation of polyaniline has been avoided. Functionalization of SWNTs is confirmed by techniques like electron microscopy, Fourier transform infrared spectroscopy, thermogravimetry, Raman spectroscopy, cyclic voltammetry and impedance spectroscopy. Electrochemical analysis suggests an enhanced double layer capacitance (similar to 110 F/g) of nanotubes after microwave treatment. Aniline functionalization of SWNTs shows possible variations on the nanotube topography with concomitant formation of a dynamic polymer layer on the nanotube surface. (C) 2008 Elsevier B.V. All rights reserved.

10aCarbon nanotubes10aFunctionalization10aMicrowave10asolubility1 aKakade, Bhalchandra, A.1 aPillai, Vijayamohanan, K. uhttps://library.ncl.res.in/content/efficient-route-towards-covalent-functionalization-single-walled-carbon-nanotubes-001822nas a2200265 4500008004100000022001400041245010300055210006900158260012500227300001100352490000700363520081100370653002101181653002001202653001901222653001501241100002801256700003001284700002401314700002501338700002201363700002301385700002001408856012801428 2010 eng d a0003-695100aHigh current density, low threshold field emission from functionalized carbon nanotube bucky paper0 aHigh current density low threshold field emission from functiona aCIRCULATION & FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USAbAMER INST PHYSICScAUG a0731020 v973 a

Field emission studies of bucky paper of multiwalled carbon nanotubes (MWNTs), prepared after microwave (MW) assisted acid functionalization are reported along with a comparison with that of ``as-grown'' sample. MW treated bucky papers reveal an interesting linear field emission behavior in Fowler-Nordheim plot. The field emission currents at preset value are found to be remarkably stable over a period of more than 3 h sustaining current densities of 4.9 mA/cm(2) and 8.5 mA/cm(2) for ``as-grown'' and functionalized sample, respectively. The enhancement in the field emission due to functionalization has been discussed in terms of tip opening and defect induced charge transport caused by intershell and intertubular interaction. (C) 2010 American Institute of Physics. [doi:10.1063/1.3479049]

10aCarbon nanotubes10acurrent density10afield emission10afullerenes1 aKakade, Bhalchandra, A.1 aPillai, Vijayamohanan, K.1 aLate, Dattatray, J.1 aChavan, Padmakar, G.1 aSheini, Farid, J.1 aMore, Mahendra, A.1 aJoag, Dilip, S. uhttps://library.ncl.res.in/content/high-current-density-low-threshold-field-emission-functionalized-carbon-nanotube-bucky-002255nas a2200265 4500008004100000022001400041245013400055210006900189260009500258300001200353490000800365520121200373653002101585653002401606653003501630653001901665653002301684100002501707700002401732700002801756700002501784700002601809700003001835856012401865 2011 eng d a0003-269700aCarbon nanotube-modified sodium dodecyl sulfate-polyacrylamide gel electrophoresis for molecular weight determination of proteins0 aCarbon nanotubemodified sodium dodecyl sulfatepolyacrylamide gel a525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USAbACADEMIC PRESS INC ELSEVIER SCIENCEcFEB a230-2350 v4093 a

The effect of incorporating carbon nanotubes (CNTs) in the gel matrix on the electrophoretic mobility of proteins based on their molecular weight differences was investigated using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). More specifically, a reduction in standard deviation in the molecular weight calibration plots by 55% in the case of multiwalled carbon nanotubes (MWCNTs) and by 34% in the case of single-walled carbon nanotubes (SWCNTs) compared with that of pristine polyacrylamide gels was achieved after incorporating an insignificant amount of functionalized CNTs into the gel matrix. A mechanism based on a more uniform pore size distribution in CNT modified polyacrylamide gel matrix is proposed. Furthermore, the impact of SWCNTs and MWCNTs on the mobility of proteins in different molecular weight regimes at a given acrylamide concentration offers a tunable gel matrix in terms of the selection of molecular weight ranges of proteins. The robustness and excellent reproducibility of the CNT-PAGE protocol are expected to have a significant impact on the molecular weight determination of newly isolated proteins. (C) 2010 Elsevier Inc. All rights reserved.

10aCarbon nanotubes10aGel electrophoresis10aMolecular weight determination10aPolyacrylamide10aProtein separation1 aParthasarathy, Meera1 aDebgupta, Joyashish1 aKakade, Bhalchandra, A.1 aAnsary, Abu, Ayoobul1 aKhan, Mohammad, Islam1 aPillai, Vijayamohanan, K. uhttps://library.ncl.res.in/content/carbon-nanotube-modified-sodium-dodecyl-sulfate-polyacrylamide-gel-electrophoresis-0