02695nas a2200217 4500008004100000022001400041245018500055210006900240260006800309300001200377490000800389520178900397653003002186653001502216653002302231100001902254700002602273700002302299700002802322856012702350 2009 eng d a0021-899500aPolyimides based on aromatic diisocyanates containing pendent flexible alkoxy chains and aromatic dianhydrides: synthesis, characterization, and liquid-crystal alignment properties0 aPolyimides based on aromatic diisocyanates containing pendent fl a111 RIVER ST, HOBOKEN, NJ 07030 USAbJOHN WILEY & SONS INCcAPR a461-4720 v1123 a

Four new aromatic diisocyanates containing pendent flexible alkoxy chains, namely, 5-butyloxy-1,3-phenylenediisocyanate, 5-octyloxy-1,3-phenylenediisocyanate, 5-dodecyloxy-1,3-phenylenediisocyanate, and 5-hexadecyloxy-1,3-phenylenediisocyanate, were synthesized by Curtius rearrangement of the corresponding 5-alkoxy-1,3-phenylene diacylazides. These diisocyanates were each polycondensed with three commercially available aromatic dianhydrides: 4,4'-oxydiphthalic anhydride, 3,3',4,4'-(hexafluoroisopropylidene) diphthalic anhydride, and 3,3',4,4'-benzophenonetetracarboxylic dianhydride-in benzonitrile in the presence of 1,4-dizabicyclo[2.2.2]octane as a catalyst to obtain a series of polyimides with inherent viscosities in the range 0.16-0.43 dL/g. Except for 3,3',4, 4'-benzophenonetetracarboxylic dianhydride based polyimides, all of the polyimides were found to be soluble in dichloromethane, m-cresol, 1-methyl-2-pyrrolidinone, tetra-chloroethane, and pyridine either at room temperature or on heating and could be cast into tough, flexible, transparent films from a solution in in-cresol or tetra chloroethane. X-ray diffractograms revealed that the polyimides with longer alkoxy chains had layered structures. The glass-transition temperature of the polyimides containing pendent flexible alkoxy chains were in the range 159-246 degrees C as measured by differential scanning calorimetry. The temperature for the 10% weight loss of the polyimides was in the range 410-460 degrees C in a nitrogen atmosphere, which indicated good thermal stability. A pretilt angle of 2.97 degrees was observed for the polyimide derived from 5-octyloxy-1,, 3-phenylenediisocyanate and 4,4'-oxydiphthalic anhydride. (c) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 461-472, 2009

10aHigh performance polymers10apolyimides10aThermal properties1 aSarkar, Anjana1 aHalhalli, Mahadeo, R.1 aKulkarni, Arun, D.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/polyimides-based-aromatic-diisocyanates-containing-pendent-flexible-alkoxy-chains-and-002173nas a2200253 4500008004100000022001400041245004500055210004500100260007400145300001200219490000700231520139000238653001501628653001601643653001501659653002301674653000801697100002501705700002501730700002601755700002801781700002801809856008201837 2011 eng d a1022-976000aPolyamides containing quinoxaline moiety0 aPolyamides containing quinoxaline moiety aVAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDSbSPRINGERcJUL a549-5570 v183 a

A new quinoxaline moiety containing aromatic diamine; 2,3-bis[4-(4-aminophenoxy)phenyl]quinoxaline (APQ) was synthesized starting from 4-methoxybenzaldehyde and was characterized by IR, (1)H, (13)C NMR and Mass spectrometry. Five new polyamides were synthesized by polycondensation of various aliphatic diacid / aromatic diacids namely, azelaic acid, bis(4-carboxyphenyl)dimethylsilane, 4,4'-oxybis(benzoicacid), isophthalic acid and terephthalic acid with APQ by Yamazaki's phosphorylation method using triphenyl phosphite as condensing agent. The polyamides were characterized by IR spectroscopy, solubility tests, inherent viscosity, X-ray diffraction technique, differential scanning colorimetry and thermogravimetric analysis. The polyamides had inherent viscosities in the range 0.39-0.45 dL/g in N, N-dimethylacetamide at 30 +/- 0.1 A degrees C. The polyamides were soluble in polar aprotic solvents such as N, N-dimethylacetamide, N, N-dimethylformamide, dimethylsulfoxide, N-methylpyrrolidone. X-Ray diffraction studies showed that polyamides were amorphous in nature. The polyamides showed glass transition temperatures in the range 104-205 A degrees C, according to differential scanning calorimetry. Thermogravimetric analysis exhibited initial decomposition temperatures above 348 A degrees C; indicating that these polyamides possessed excellent thermal stability.

10apolyamides10aQuinoxaline10asolubility10aThermal properties10aXRD1 aPatil, Vidyadhar, B.1 aSayyed, Maheboob, M.1 aMahanwar, Prakash, A.1 aWadgaonkar, Prakash, P.1 aMaldar, Noormahamad, N. uhttps://library.ncl.res.in/content/polyamides-containing-quinoxaline-moiety-002698nas a2200277 4500008004100000022001400041245014400055210006900199260007600268300001400344490000800358520162000366653001401986653003102000653003702031653003002068653002102098653002302119100002902142700002302171700003002194700002402224700002702248700002802275856011702303 2011 eng d a0021-899500aPoly(ether ether ketone)s and poly(ether ether ketone ketone)s containing cardo decahydronaphthalene groups: synthesis and characterization0 aPolyether ether ketones and polyether ether ketone ketones conta aCOMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USAbWILEY-BLACKWELLcNOV a1607-16130 v1223 a

New poly(ether ether ketone)s and poly (ether ether ketone ketone) s were synthesized by polycondensation of each of the three bisphenols, viz., 4,4'-(octahydro-2(1H)-naphthylidene) bisphenol, 4,4'-(octa-hydro-2(1H)-naphthylidene) bis-3-methylphenol, and 4,4'(octahydro-2(1H)-naphthylidene) bis-3,5-dimethylphenol with 4,4'-difluorobenzophenone and 1,3-bis(4-fluorobenzoyl) benzene in a mixture of N,N-dimethylacetamide and toluene [1 : 1 (v/v)] in the presence of anhydrous potassium carbonate. Inherent viscosities of poly(ether ether ketone) s and poly (ether ether ketone ketone) s were in the range 0.32-0.80 dL/g and number-average molecular weights were in the range 16,100-55,900 g/mol. Poly(ether ether ketone) s and poly(ether ether ketone ketone) s were soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, meta-cresol, pyridine, and 1-methyl-2-pyrrolidinone at room temperature and could be cast into tough, transparent, and flexible films from their chloroform solutions. Wide angle x-ray diffraction measurements revealed the amorphous nature of poly(ether ether ketone) s and poly (ether ether ketone ketone) s. The glass transition temperature poly(ether ether ketone) s and poly(ether ether ketone ketone) s were in the range 185-251 degrees C. The temperature at 10% weight loss, determined from thermogravimetric analysis, of poly(ether ether ketone) s and poly(ether ether ketone ketone) s in nitrogen atmosphere was in the range 462-493 degrees C indicating their good thermal stability. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122: 1607-1613, 2011

10abisphenol10acardo decahydronaphthalene10apoly(ether ether ketone ketone)s10apoly(ether ether ketone)s10aPolycondensation10aThermal properties1 aHonkhambe, Pandurang, N.1 aPasale, Sharad, K.1 aBhairamadgi, Nagendra, S.1 aKumbhar, Kishor, P.1 aSalunkhe, Manikrao, M.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/polyether-ether-ketones-and-polyether-ether-ketone-ketones-containing-cardo-002286nas a2200277 4500008004100000022001400041245015000055210006900205260008700274300001200361490000700373520120900380653001301589653001401602653001301616653003701629653003001666653002101696653002301717100002901740700002601769700002601795700002701821700002801848856013201876 2013 eng d a0954-008300aSynthesis and characterization of poly(ether ether ketone)s and poly(ether ether ketone ketone) s containing pendant biphenyl and naphthyl groups0 aSynthesis and characterization of polyether ether ketones and po a1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLANDbSAGE PUBLICATIONS LTDcMAY a260-2670 v253 a

New poly(ether ether ketone)s (PEEKs) and poly(ether ether ketone ketone)s (PEEKKs) containing pendant biphenyl and naphthyl groups were synthesized by nucleophilic substitution reaction of each of the four bisphenols viz., 1-(4- biphenylyl)- 1,1- bis(4- hydroxyphenyl) ethane, 1-(4- biphenylyl)- 1,1- bis(3- methyl, 4- hydroxyphenyl) ethane, 4,4'-[1-(2- naphthalenyl) ethylidene] bis-phenol and 4,4'-[1-(2- naphthalenyl) ethylidene] bis-3-methylphenol with 4,4'- difluorobenzophenone and 1,3- bis(4- fluorobenzoyl) benzene in a solvent mixture of N,N-dimethylacetamide and toluene in the presence of anhydrous potassium carbonate. Inherent viscosities and number-average molecular weights of polymers were in the range of 0.42-0.86 dl/g and 2.40-7.55 x 10(4), respectively. PEEKs and PEEKKs were amorphous in nature and were readily soluble in a wide range of organic solvents and could be cast into flexible and tough films from chloroform solution. Glass transition temperature of PEEKs and PEEKKs were in the range of 180 degrees C -200 degrees C. T-10 values of PEEKs and PEEKKs were in the range of 424 degrees C-512 degrees C in nitrogen atmosphere, indicating their good thermal stability.

10abiphenyl10abisphenol10anaphthyl10apoly(ether ether ketone ketone)s10apoly(ether ether ketone)s10aPolycondensation10aThermal properties1 aHonkhambe, Pandurang, N.1 aDhamdhere, Neelam, A.1 aTawade, Bhausaheb, V.1 aSalunkhe, Manikrao, M.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/synthesis-and-characterization-polyether-ether-ketones-and-polyether-ether-ketone-ketone-s-002168nas a2200253 4500008004100000022001400041245012400055210006900179260007400248300000800322490000700330520121400337653002401551653002801575653001501603653002101618653001901639653002301658100002601681700002601707700002201733700002801755856013101783 2014 eng d a1022-976000aProcessable aromatic polyesters based on bisphenol derived from cashew nut shell liquid: synthesis and characterization0 aProcessable aromatic polyesters based on bisphenol derived from  aVAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDSbSPRINGERcNOV a6170 v213 a

A new bisphenol viz., 4-(4-hydroxyphenoxy)-3-pentadecylphenol (HPPDP) was synthesized starting from cashew nut shell liquid (CNSL). Aromatic (co)polyesters containing ether linkages in the main chain and pendent pentadecyl chains were synthesized by the interfacial polycondensation of HPPDP with terephthalic acid chloride (TPC), isophthalic acid chloride (IPC) and a mixture of TPC and IPC (50: 50 mol %) and by polycondenation of varying composition of HPPDP and bisphenol-A (BPA) with TPC. The resultant (co) polyesters exhibited inherent viscosities in the range 0.70-1.21 dL g(-1) and number-average molecular weights in the range 16,000-48,200 (GPC, polystyrene standard). Polyesters were soluble in common organic solvents such as chloroform and dichloromethane and could be cast into films from chloroform solution. Polyesters exhibited T-10 values in the range 430-455 degrees C and Tg values were in the range 29-202 degrees C. Dynamic mechanical storage modulus and maximum on transition of tan delta curve decreased with increased content of HPPDP in copolyesters. Importantly, the large difference between Tg and T-10 values offers the possibility to process these polyesters in the melt.

10aAromatic polyesters10aCashew nut shell liquid10apentadecyl10aPolycondensation10aprocessability10aThermal properties1 aTawade, Bhausaheb, V.1 aSalunke, Jagadish, K.1 aSane, Prakash, S.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/processable-aromatic-polyesters-based-bisphenol-derived-cashew-nut-shell-liquid-synthesis-002136nas a2200229 4500008004100000022001400041245012600055210006900181260000800250300001000258490000700268520133600275653002401611653001401635653001401649653001301663653002301676100002201699700002601721700002801747856013101775 2026 eng d a1060-132500aUtilization of bisphenol based on lignin-derived chemicals for the synthesis of partially bio-based aromatic copolyesters0 aUtilization of bisphenol based on ligninderived chemicals for th cJAN a83-900 v633 a

New aromatic copolyesters were synthesized by phase-transfer catalyzed interfacial polycondensation of 4,4 `-((3,4-dimethoxyphenyl)methylene)bis(2-methoxyphenol) (DMBM) with isophthaloyl chloride (IPC) and a mixture of (50:50 mol %) IPC and terephthaloyl chloride (TPC). Additionally, a series of copolyesters was synthesized by polycondensation of varying compositions of DMBM and bisphenol A with IPC. Copolyesters exhibited inherent viscosity and Mn values in the range 0.59-0.98 dL/g and 15,840-49,460 g/mol, respectively, indicating formation of reasonably high molecular weight polymers. Copolyesters could be cast into tough, transparent and flexible films from chloroform solution. UV-vis measurements on films gave values of T400, T450 and cut-off wavelength in the range 80-84 %, 83-89 % and 324-334 nm, respectively. The formation of random copolyesters was evidenced by 13C NMR spectroscopic studies. Copolyesters exhibited good thermal stability with 10% weight loss temperature in the range 391-438 degrees C. The Tg values of copolyesters were in the range 162-180 degrees C and Tg values decreased with an increase in mol% content of DMBM. Copolyesters exhibited tensile strength, Young's modulus and elongation at break values in the range 83.55-70.68 MPa, 2.11-1.31 GPa and 10.52-5.45 %, respectively.

10aAromatic polyesters10abio-based10abisphenol10amethoxyl10aThermal properties1 aWale, Apparav, K.1 aAmbade, Ashootosh, V.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/utilization-bisphenol-based-lignin-derived-chemicals-synthesis-partially-bio-based-aromatic