02403nas a2200241 4500008004100000022001400041245009600055210006900151260006800220300001400288490000800302520148600310653002401796653001401820653003301834653002701867100002901894700002301923700003001946700002801976700002702004856013002031 2010 eng d a0021-899500aSynthesis and characterization of new aromatic polyesters containing pendent naphthyl units0 aSynthesis and characterization of new aromatic polyesters contai a111 RIVER ST, HOBOKEN, NJ 07030 USAbJOHN WILEY & SONS INCcSEP a2545-25520 v1173 a

Two bisphenols, viz., 4,4'-[1-(2-naphthaleny-1)ethylidene]bisphenol and 4,4'-[1-(2-naphthalenyl) ethylidene]bis-3-methylphenol were prepared by condensation of commercially available 2-acetonaphthanone with phenol and o-cresol, respectively. A series of new aromatic polyesters containing pendent naphthyl units was synthesized by phase-transfer-catalyzed interfacial polycondensation of these bisphenols with isophthaloyl chloride, terephthaloyl chloride, and a mixture of isophthaloyl chlorideiterephthaloyl chloride (50 : 50 mol %). Inherent viscosities of polyesters were in the range 0.83-1.76 dL g(-1), while number average molecular weights (M(n)) were in the range 61,000-235,000 g mol(-1). Polyesters were readily soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, m-cresol, pyridine, N,N-dimethylformamide, N,N-dimethylacetarnide, and 1-methyl-2-pyrrolidinone at room temperature. Tough, transparent, and flexible films were cast from a solution of polyesters in chloroform. X-Ray diffraction measurements displayed a broad halo at 20 congruent to 19 degrees indicating the amorphous nature of polyesters. Glass transition temperatures of polyesters were in the range 209-259 degrees C. The temperature at 10% weight loss (T(10)), determined by TGA in nitrogen atmosphere, of polyesters was in the range 435-500 degrees C indicating their good thermal stability. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117: 2545-2552, 2010

10aAromatic polyesters10abisphenol10ainterfacial polycondensation10apendent naphthyl units1 aHonkhambe, Pandurang, N.1 aBiyani, Mahesh, V.1 aBhairamadgi, Nagendra, S.1 aWadgaonkar, Prakash, P.1 aSalunkhe, Manikrao, M. uhttps://library.ncl.res.in/content/synthesis-and-characterization-new-aromatic-polyesters-containing-pendent-naphthyl-units-002423nas a2200253 4500008004100000022001400041245010700055210006900162260010600231300001200337490000700349520146400356653001401820653001001834653002501844653001401869653003601883100002901919700003001948700002301978700002802001700002702029856011302056 2010 eng d a0014-305700aSynthesis and characterization of new aromatic polyesters containing cardo decahydronaphthalene groups0 aSynthesis and characterization of new aromatic polyesters contai aTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLANDbPERGAMON-ELSEVIER SCIENCE LTDcAPR a709-7180 v463 a

Three cardo bisphenols containing decahydronaphthalene group viz., 4,4'-(octahydro-2(1H)-naphthylidene)bisphenol, 4,4'-(octahydro-2(1H)-naphthylidene)bis-3-methylphenol and 4,4'-(octahydro-2(1H)-naphthylidene)bis-3,5-dimethylphenol were synthesized starting from commercially available 2-naphthol and were utilized for synthesis of new aromatic polyesters by phase transfer-catalyzed interfacial polycondensation with isophthaloyl chloride, terephthaloyl chloride and a mixture of isophthaloyl chloride and terephthaloyl chloride (50:50 mol %). Inherent viscosities and number average molecular weights (M(n)) of polyesters were in the range 0.35-0.84 dL/g and 13300-48,500 (Gel Permeation Chromatography, polystyrene standard), respectively. Polyesters were readily soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, meta-cresol, pyridine, N,N-dimethylformamide, N,N-dimethylacetamide, and 1-methy1-2-pyrrolidinone at room temperature and could be cast into tough, transparent and flexible films from their chloroform solutions. Wide-angle X-ray diffraction measurements revealed the amorphous nature of polyesters. The glass transition temperature of polyesters was in the range 207-287 degrees C. The temperature at 10% weight loss (T(10)), determined from thermogravimetric analysis of polyesters, was in the range 425-460 degrees C indicating their good thermal stability. (C) 2010 Elsevier Ltd. All rights reserved.

10abisphenol10aCardo10aDecahydronaphthalene10apolyester10aStructure-property relationship1 aHonkhambe, Pandurang, N.1 aBhairamadgi, Nagendra, S.1 aBiyani, Mahesh, V.1 aWadgaonkar, Prakash, P.1 aSalunkhe, Manikrao, M. uhttps://library.ncl.res.in/content/synthesis-and-characterization-new-aromatic-polyesters-containing-cardo-002698nas a2200277 4500008004100000022001400041245014400055210006900199260007600268300001400344490000800358520162000366653001401986653003102000653003702031653003002068653002102098653002302119100002902142700002302171700003002194700002402224700002702248700002802275856011702303 2011 eng d a0021-899500aPoly(ether ether ketone)s and poly(ether ether ketone ketone)s containing cardo decahydronaphthalene groups: synthesis and characterization0 aPolyether ether ketones and polyether ether ketone ketones conta aCOMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USAbWILEY-BLACKWELLcNOV a1607-16130 v1223 a

New poly(ether ether ketone)s and poly (ether ether ketone ketone) s were synthesized by polycondensation of each of the three bisphenols, viz., 4,4'-(octahydro-2(1H)-naphthylidene) bisphenol, 4,4'-(octa-hydro-2(1H)-naphthylidene) bis-3-methylphenol, and 4,4'(octahydro-2(1H)-naphthylidene) bis-3,5-dimethylphenol with 4,4'-difluorobenzophenone and 1,3-bis(4-fluorobenzoyl) benzene in a mixture of N,N-dimethylacetamide and toluene [1 : 1 (v/v)] in the presence of anhydrous potassium carbonate. Inherent viscosities of poly(ether ether ketone) s and poly (ether ether ketone ketone) s were in the range 0.32-0.80 dL/g and number-average molecular weights were in the range 16,100-55,900 g/mol. Poly(ether ether ketone) s and poly(ether ether ketone ketone) s were soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, meta-cresol, pyridine, and 1-methyl-2-pyrrolidinone at room temperature and could be cast into tough, transparent, and flexible films from their chloroform solutions. Wide angle x-ray diffraction measurements revealed the amorphous nature of poly(ether ether ketone) s and poly (ether ether ketone ketone) s. The glass transition temperature poly(ether ether ketone) s and poly(ether ether ketone ketone) s were in the range 185-251 degrees C. The temperature at 10% weight loss, determined from thermogravimetric analysis, of poly(ether ether ketone) s and poly(ether ether ketone ketone) s in nitrogen atmosphere was in the range 462-493 degrees C indicating their good thermal stability. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122: 1607-1613, 2011

10abisphenol10acardo decahydronaphthalene10apoly(ether ether ketone ketone)s10apoly(ether ether ketone)s10aPolycondensation10aThermal properties1 aHonkhambe, Pandurang, N.1 aPasale, Sharad, K.1 aBhairamadgi, Nagendra, S.1 aKumbhar, Kishor, P.1 aSalunkhe, Manikrao, M.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/polyether-ether-ketones-and-polyether-ether-ketone-ketones-containing-cardo-002286nas a2200277 4500008004100000022001400041245015000055210006900205260008700274300001200361490000700373520120900380653001301589653001401602653001301616653003701629653003001666653002101696653002301717100002901740700002601769700002601795700002701821700002801848856013201876 2013 eng d a0954-008300aSynthesis and characterization of poly(ether ether ketone)s and poly(ether ether ketone ketone) s containing pendant biphenyl and naphthyl groups0 aSynthesis and characterization of polyether ether ketones and po a1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLANDbSAGE PUBLICATIONS LTDcMAY a260-2670 v253 a

New poly(ether ether ketone)s (PEEKs) and poly(ether ether ketone ketone)s (PEEKKs) containing pendant biphenyl and naphthyl groups were synthesized by nucleophilic substitution reaction of each of the four bisphenols viz., 1-(4- biphenylyl)- 1,1- bis(4- hydroxyphenyl) ethane, 1-(4- biphenylyl)- 1,1- bis(3- methyl, 4- hydroxyphenyl) ethane, 4,4'-[1-(2- naphthalenyl) ethylidene] bis-phenol and 4,4'-[1-(2- naphthalenyl) ethylidene] bis-3-methylphenol with 4,4'- difluorobenzophenone and 1,3- bis(4- fluorobenzoyl) benzene in a solvent mixture of N,N-dimethylacetamide and toluene in the presence of anhydrous potassium carbonate. Inherent viscosities and number-average molecular weights of polymers were in the range of 0.42-0.86 dl/g and 2.40-7.55 x 10(4), respectively. PEEKs and PEEKKs were amorphous in nature and were readily soluble in a wide range of organic solvents and could be cast into flexible and tough films from chloroform solution. Glass transition temperature of PEEKs and PEEKKs were in the range of 180 degrees C -200 degrees C. T-10 values of PEEKs and PEEKKs were in the range of 424 degrees C-512 degrees C in nitrogen atmosphere, indicating their good thermal stability.

10abiphenyl10abisphenol10anaphthyl10apoly(ether ether ketone ketone)s10apoly(ether ether ketone)s10aPolycondensation10aThermal properties1 aHonkhambe, Pandurang, N.1 aDhamdhere, Neelam, A.1 aTawade, Bhausaheb, V.1 aSalunkhe, Manikrao, M.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/synthesis-and-characterization-polyether-ether-ketones-and-polyether-ether-ketone-ketone-s-002784nas a2200241 4500008004100000022001400041245013400055210006900189260000900258300001100267490000800278520190300286653002902189653001402218653001902232653003102251653002302282100002602305700002502331700002802356700002702384856013102411 2022 eng d a0014-305700aPost-polymerization modifiable aromatic (co)poly(ether sulfone)s possessing pendant norbornenyl groups based upon a new bisphenol0 aPostpolymerization modifiable aromatic copolyether sulfones poss cAUG  a1114310 v1763 a

A new bisphenol possessing pendant norbornenyl group viz., 4, 4 `-(bicyclo (2.2.1) hept-5-en-2 yl methylene) bis (2-methoxyphenol) (BPA-NB) was synthesized by a single-step base-catalyzed condensation reaction of 5-norbor-nene-2-carboxaldehyde with guaiacol. NMR spectral data indicated formation of BPA-NB comprising of isomeric components. A series of (co)poly(ether sulfone)s possessing pendant norbornenyl groups was synthesized by nucleophilic aromatic substitution polycondensation of varying molar ratio of BPA-NB and bisphenol-A (BPA) with bis(4-fluorophenyl) sulfone. Inherent viscosity values and number average molecular weights of (co)poly (ether sulfone)s were in the range 0.67-1.01 dL/g and 75,400-1,16,300 g/mol, respectively indicating the formation of reasonably high molecular weight polymers. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)poly(ether sulfone)s. (Co)poly(ether sulfone)s were characterized using FT-IR, H-1 NMR and C-13 NMR spectroscopy, XRD, TGA and DSC analysis. The formation of random copoly(ether sulfone)s was demonstrated by( 13)C NMR analysis. The incorporation of BPA-NB into (co)poly(ether sulfone)s resulted into improvement in Tg values. BPA-NB-based (co)poly(ether sulfone)s offered possibilities for post -modifications involving either methoxyl or norbornenyl groups. A representative copoly(ether sulfone) (PSU-NB-2) possessing pendant norbornenyl groups was chemically modified via thiol-ene reaction with three representative thiol compounds, namely, 1-dodecanethiol, 2-furanmethanethiol and 2-mercaptoethanol to yield corresponding post-modified polymers in a quantitative manner. Additionally, it was demonstrated that copoly (ether sulfone) possessing pendant norbornenyl groups could be used to form insoluble cross-linked gel in the presence of a multifunctional thiol cross-linker.

10a(Co)poly(ether sulfone)s10abisphenol10aCross -linking10aPendant norbornenyl groups10aThiol-ene reaction1 aTalanikar, Aniket, A.1 aNagane, Samadhan, S.1 aWadgaonkar, Prakash, P.1 aRashinkar, Gajanan, S. uhttps://library.ncl.res.in/content/post-polymerization-modifiable-aromatic-copolyether-sulfones-possessing-pendant-norbornenyl02477nas a2200301 4500008004100000022001400041245012900055210006900184260000800253300001100261490000800272520146800280653002901748653001301777653001801790653001601808653001401824653001401838653002301852100002201875700002301897700002601920700002301946700002501969700002601994700002802020856012702048 2024 eng d a0014-305700aCatechol- and phenolic hydroxyl-functionalized partially bio-based (Co) poly(ether sulfone)s with multifarious applicability0 aCatechol and phenolic hydroxylfunctionalized partially biobased  cNOV a1134840 v2203 a

A largely bio-based new bisphenol, namely, 4,4 `-((3,4-dimethoxyphenyl)methylene)-bis(2-methoxyphenol) (DMBM) was synthesized by the reaction of veratraldehyde with guaiacol. DMBM and varying compositions of DMBM and bisphenol A were polycondensed with bis(4-fluorophenyl) sulfone to afford reasonably high molecular weight film-forming (co)poly(ether sulfone)s possessing built-in methoxyl groups. T10 and Tg values of (co)poly(ether sulfone)s were in the range 382-478 degrees C and 171-187 degrees C, respectively indicating their good thermal stability and the values decreased with increase in mol % incorporation of DMBM. The methoxyl groups present in (co)poly (ether sulfone)s were quantitatively de-blocked resulting in the formation of corresponding polymers possessing pendant catechol moieties and free phenolic hydroxyl groups. By virtue of the presence of these functional moieties, (co)poly(ether sulfone)s are amenable for post-polymerization modifications, and exhibited properties such as antimicrobial (23 mm against Staphylococcus aureus and 18 mm against Escherichia coli)), antioxidant (72 % scavenger of free radicals), adhesive (2.24 MPa lap shear strength) and usefulness as redox-active agent in zinc-ion batteries. These data underscore the promise of DMBM as a versatile monomer of wider utility for the synthesis of functional (co)poly(ether sulfone)s capable of expanding their applicability beyond the conventional ones.

10a(Co)poly(ether sulfone)s10aadhesive10aAntimicrobial10aAntioxidant10abio-based10abisphenol10aZinc-ion batteries1 aWale, Apparav, K.1 aJagtap, Ashish, S.1 aPandey, Priyanshi, R.1 aDastager, Syed, G.1 aShelke, Manjusha, V.1 aAmbade, Ashootosh, V.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/catechol-and-phenolic-hydroxyl-functionalized-partially-bio-based-co-polyether-sulfones02136nas a2200229 4500008004100000022001400041245012600055210006900181260000800250300001000258490000700268520133600275653002401611653001401635653001401649653001301663653002301676100002201699700002601721700002801747856013101775 2026 eng d a1060-132500aUtilization of bisphenol based on lignin-derived chemicals for the synthesis of partially bio-based aromatic copolyesters0 aUtilization of bisphenol based on ligninderived chemicals for th cJAN a83-900 v633 a

New aromatic copolyesters were synthesized by phase-transfer catalyzed interfacial polycondensation of 4,4 `-((3,4-dimethoxyphenyl)methylene)bis(2-methoxyphenol) (DMBM) with isophthaloyl chloride (IPC) and a mixture of (50:50 mol %) IPC and terephthaloyl chloride (TPC). Additionally, a series of copolyesters was synthesized by polycondensation of varying compositions of DMBM and bisphenol A with IPC. Copolyesters exhibited inherent viscosity and Mn values in the range 0.59-0.98 dL/g and 15,840-49,460 g/mol, respectively, indicating formation of reasonably high molecular weight polymers. Copolyesters could be cast into tough, transparent and flexible films from chloroform solution. UV-vis measurements on films gave values of T400, T450 and cut-off wavelength in the range 80-84 %, 83-89 % and 324-334 nm, respectively. The formation of random copolyesters was evidenced by 13C NMR spectroscopic studies. Copolyesters exhibited good thermal stability with 10% weight loss temperature in the range 391-438 degrees C. The Tg values of copolyesters were in the range 162-180 degrees C and Tg values decreased with an increase in mol% content of DMBM. Copolyesters exhibited tensile strength, Young's modulus and elongation at break values in the range 83.55-70.68 MPa, 2.11-1.31 GPa and 10.52-5.45 %, respectively.

10aAromatic polyesters10abio-based10abisphenol10amethoxyl10aThermal properties1 aWale, Apparav, K.1 aAmbade, Ashootosh, V.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/utilization-bisphenol-based-lignin-derived-chemicals-synthesis-partially-bio-based-aromatic