02403nas a2200241 4500008004100000022001400041245009600055210006900151260006800220300001400288490000800302520148600310653002401796653001401820653003301834653002701867100002901894700002301923700003001946700002801976700002702004856013002031 2010 eng d a0021-899500aSynthesis and characterization of new aromatic polyesters containing pendent naphthyl units0 aSynthesis and characterization of new aromatic polyesters contai a111 RIVER ST, HOBOKEN, NJ 07030 USAbJOHN WILEY & SONS INCcSEP a2545-25520 v1173 a

Two bisphenols, viz., 4,4'-[1-(2-naphthaleny-1)ethylidene]bisphenol and 4,4'-[1-(2-naphthalenyl) ethylidene]bis-3-methylphenol were prepared by condensation of commercially available 2-acetonaphthanone with phenol and o-cresol, respectively. A series of new aromatic polyesters containing pendent naphthyl units was synthesized by phase-transfer-catalyzed interfacial polycondensation of these bisphenols with isophthaloyl chloride, terephthaloyl chloride, and a mixture of isophthaloyl chlorideiterephthaloyl chloride (50 : 50 mol %). Inherent viscosities of polyesters were in the range 0.83-1.76 dL g(-1), while number average molecular weights (M(n)) were in the range 61,000-235,000 g mol(-1). Polyesters were readily soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, m-cresol, pyridine, N,N-dimethylformamide, N,N-dimethylacetarnide, and 1-methyl-2-pyrrolidinone at room temperature. Tough, transparent, and flexible films were cast from a solution of polyesters in chloroform. X-Ray diffraction measurements displayed a broad halo at 20 congruent to 19 degrees indicating the amorphous nature of polyesters. Glass transition temperatures of polyesters were in the range 209-259 degrees C. The temperature at 10% weight loss (T(10)), determined by TGA in nitrogen atmosphere, of polyesters was in the range 435-500 degrees C indicating their good thermal stability. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117: 2545-2552, 2010

10aAromatic polyesters10abisphenol10ainterfacial polycondensation10apendent naphthyl units1 aHonkhambe, Pandurang, N.1 aBiyani, Mahesh, V.1 aBhairamadgi, Nagendra, S.1 aWadgaonkar, Prakash, P.1 aSalunkhe, Manikrao, M. uhttps://library.ncl.res.in/content/synthesis-and-characterization-new-aromatic-polyesters-containing-pendent-naphthyl-units-002423nas a2200253 4500008004100000022001400041245010700055210006900162260010600231300001200337490000700349520146400356653001401820653001001834653002501844653001401869653003601883100002901919700003001948700002301978700002802001700002702029856011302056 2010 eng d a0014-305700aSynthesis and characterization of new aromatic polyesters containing cardo decahydronaphthalene groups0 aSynthesis and characterization of new aromatic polyesters contai aTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLANDbPERGAMON-ELSEVIER SCIENCE LTDcAPR a709-7180 v463 a

Three cardo bisphenols containing decahydronaphthalene group viz., 4,4'-(octahydro-2(1H)-naphthylidene)bisphenol, 4,4'-(octahydro-2(1H)-naphthylidene)bis-3-methylphenol and 4,4'-(octahydro-2(1H)-naphthylidene)bis-3,5-dimethylphenol were synthesized starting from commercially available 2-naphthol and were utilized for synthesis of new aromatic polyesters by phase transfer-catalyzed interfacial polycondensation with isophthaloyl chloride, terephthaloyl chloride and a mixture of isophthaloyl chloride and terephthaloyl chloride (50:50 mol %). Inherent viscosities and number average molecular weights (M(n)) of polyesters were in the range 0.35-0.84 dL/g and 13300-48,500 (Gel Permeation Chromatography, polystyrene standard), respectively. Polyesters were readily soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, meta-cresol, pyridine, N,N-dimethylformamide, N,N-dimethylacetamide, and 1-methy1-2-pyrrolidinone at room temperature and could be cast into tough, transparent and flexible films from their chloroform solutions. Wide-angle X-ray diffraction measurements revealed the amorphous nature of polyesters. The glass transition temperature of polyesters was in the range 207-287 degrees C. The temperature at 10% weight loss (T(10)), determined from thermogravimetric analysis of polyesters, was in the range 425-460 degrees C indicating their good thermal stability. (C) 2010 Elsevier Ltd. All rights reserved.

10abisphenol10aCardo10aDecahydronaphthalene10apolyester10aStructure-property relationship1 aHonkhambe, Pandurang, N.1 aBhairamadgi, Nagendra, S.1 aBiyani, Mahesh, V.1 aWadgaonkar, Prakash, P.1 aSalunkhe, Manikrao, M. uhttps://library.ncl.res.in/content/synthesis-and-characterization-new-aromatic-polyesters-containing-cardo-002935nas a2200277 4500008004100000022001400041245015100055210006900206260007300275300001200348490000800360520184600368653000602214653005402220653004302274653002402317653003302341653001502374653002302389100001802412700001402430700003002444700002302474700002802497856013202525 2010 eng d a0921-510700aSynthesis and characterization of polyesters from 2,3-bis (4 `-hydroxy phenyl) quinoxaline and 2,3-bis (2 `-hydroxynaphthalene-6 `-yl) quinoxaline0 aSynthesis and characterization of polyesters from 23bis 4 hydrox aPO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSbELSEVIER SCIENCE BVcAPR a186-1920 v1683 a

Two bisphenols containing pendant, quinoxaline moiety; 2,3-bis (4'-hydroxy phenyl) quinoxaline (BHPQ) and 2,3-bis (2'-hydroxynaphthalene-6-yl) quinoxaline (BHNQ) were synthesized and characterized by FT-IR, (1)H, (13)C NMR and mass spectrometry. Aromatic polyesters and copolyesters were prepared by interfacial polymerization from BHPQ or BHNQ and isophthaloyl chloride or terephthaloyl chloride or a mixture of different mole proportions of (IPC + TPC). These polyesters and copolyesters were characterized by spectroscopic technique, viscosity measurement, solubility, thermal stability. DSC and XRD. Polymers had moderate to high molecular weights as evidenced by the inherent viscosities in the range 0.35-0.78 dL/g for BHPQ series and 0.27-0.52 dL/g for BHNQ series. BHPQ polyesters and copolyesters dissolved in m-cresol, NMP and conc. H(2)SO(4) whereas, BHNQ polyesters and copolyesters were readily soluble in NMP, DMAc, (TCE + phenol) and partly soluble in solvent like CHCl(3), pyridine, etc. Wide angle X-ray diffraction (WAXD) results showed that introduction of quinoxaline moiety into polymer chain and aromatic phenyl/rigid naphthyl structures lead to crystalinity. Differentional scanning calorimetry of BHNQ polyesters showed the glass transition temperatures in the range of 131-151 degrees C. BHPQ polyesters did not show any weight loss below 330 degrees C and retained 27-55% weight at 900 degrees C when investigated by TGA under nitrogen atmosphere demonstrating good thermal stability BHNQderived polyesters showed initial decomposition temperatures in range 211-234 degrees C. The structure-property relationships for the mentioned polyesters are analyzed, as these polyesters are of interest as materials for electronics, microelectronics and membrane separation. (C) 2009 Elsevier B.V. All rights reserved.

10a210a3-Bis (2 `-hydroxynaphthalene-6 `-yl) quinoxaline10a3-Bis (4 `-hydroxy phenyl) quinoxaline10aAromatic polyesters10aGlass transition temperature10asolubility10aThermal properties1 aPatil, V., B.1 aMedhi, M.1 aBhairamadgi, Nagendra, S.1 aWadgaonkar, P., P.1 aMaldar, Noormahamad, N. uhttps://library.ncl.res.in/content/synthesis-and-characterization-polyesters-23-bis-4-hydroxy-phenyl-quinoxaline-and-23-bis-2-002698nas a2200277 4500008004100000022001400041245014400055210006900199260007600268300001400344490000800358520162000366653001401986653003102000653003702031653003002068653002102098653002302119100002902142700002302171700003002194700002402224700002702248700002802275856011702303 2011 eng d a0021-899500aPoly(ether ether ketone)s and poly(ether ether ketone ketone)s containing cardo decahydronaphthalene groups: synthesis and characterization0 aPolyether ether ketones and polyether ether ketone ketones conta aCOMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USAbWILEY-BLACKWELLcNOV a1607-16130 v1223 a

New poly(ether ether ketone)s and poly (ether ether ketone ketone) s were synthesized by polycondensation of each of the three bisphenols, viz., 4,4'-(octahydro-2(1H)-naphthylidene) bisphenol, 4,4'-(octa-hydro-2(1H)-naphthylidene) bis-3-methylphenol, and 4,4'(octahydro-2(1H)-naphthylidene) bis-3,5-dimethylphenol with 4,4'-difluorobenzophenone and 1,3-bis(4-fluorobenzoyl) benzene in a mixture of N,N-dimethylacetamide and toluene [1 : 1 (v/v)] in the presence of anhydrous potassium carbonate. Inherent viscosities of poly(ether ether ketone) s and poly (ether ether ketone ketone) s were in the range 0.32-0.80 dL/g and number-average molecular weights were in the range 16,100-55,900 g/mol. Poly(ether ether ketone) s and poly(ether ether ketone ketone) s were soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, meta-cresol, pyridine, and 1-methyl-2-pyrrolidinone at room temperature and could be cast into tough, transparent, and flexible films from their chloroform solutions. Wide angle x-ray diffraction measurements revealed the amorphous nature of poly(ether ether ketone) s and poly (ether ether ketone ketone) s. The glass transition temperature poly(ether ether ketone) s and poly(ether ether ketone ketone) s were in the range 185-251 degrees C. The temperature at 10% weight loss, determined from thermogravimetric analysis, of poly(ether ether ketone) s and poly(ether ether ketone ketone) s in nitrogen atmosphere was in the range 462-493 degrees C indicating their good thermal stability. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122: 1607-1613, 2011

10abisphenol10acardo decahydronaphthalene10apoly(ether ether ketone ketone)s10apoly(ether ether ketone)s10aPolycondensation10aThermal properties1 aHonkhambe, Pandurang, N.1 aPasale, Sharad, K.1 aBhairamadgi, Nagendra, S.1 aKumbhar, Kishor, P.1 aSalunkhe, Manikrao, M.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/polyether-ether-ketones-and-polyether-ether-ketone-ketones-containing-cardo-002154nas a2200253 4500008004100000022001400041245012400055210006900179260005700248300001400305490000700319520113600326653003801462653004601500653004401546653004201590653002301632100001801655700001901673700003001692700001901722700002801741856013101769 2011 eng d a0170-083900aSynthesis and characterization of soluble polyamides from bis-[(4 `-aminobenzyl)-4-benzamide] ether and various diacids0 aSynthesis and characterization of soluble polyamides from bis4 a a233 SPRING ST, NEW YORK, NY 10013 USAbSPRINGERcMAY a1207-12180 v663 a

New aromatic diamine containing preformed amide, ether, and methylene; bis-[(4'-aminobenzyl)-4-benzamide] ether (BABE), was synthesized and characterized by FT-IR, NMR, and mass spectrometry. Aromatic-aliphatic polyamides were prepared from BABE with aliphatic/aromatic diacids via Yamazaki's polymerization. The polyamides were characterized by FT-IR, (1)H NMR, inherent viscosity [eta(inh)], solubility tests, differential scanning calorimetry [DSC], thermogravimetric analysis [TGA], and X-ray diffraction [XRD]. Polyamides had inherent viscosities 0.35-0.84 dL/g, soluble in aprotic polar solvents like N-methyl-2-pyrrolidone, N, N-dimethyl acetamide and dimethyl sulphoxide containing LiCl due to an amorphous to partially crystalline morphology; as XRD patterns indicated. DSC analysis of polyamides showed glass transition temperatures 166-268 A degrees C. Polyamides showed high thermal stability as they did not degrade below 300 A degrees C, had 10% weight loss temperature higher than 375 A degrees C, and the char yields at 900 A degrees C were 22-55%; indicating potential applications as engineering materials.

10aAryl-ether and methylene linkages10aBis-[(4 `-aminobenzyl)-4-benzamide] ether10aDirect phosphorylative polycondensation10aSoluble aromatic-aliphatic polyamides10aThermal properties1 aPatil, A., S.1 aSayyed, M., M.1 aBhairamadgi, Nagendra, S.1 aHan, Sung-Hwan1 aMaldar, Noormahamad, N. uhttps://library.ncl.res.in/content/synthesis-and-characterization-soluble-polyamides-bis-4-aminobenzyl-4-benzamide-ether-and-0