02206nas a2200265 4500008004100000022001400041245008800055210006900143260007300212300001000285490000800295520125800303653001501561653001301576653002201589653003101611653003301642100002201675700002601697700002601723700002501749700002301774700002401797856011901821 2009 eng d a0926-860X00aVisible light induced photoreduction of methyl orange by N-doped mesoporous titania0 aVisible light induced photoreduction of methyl orange by Ndoped  aPO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSbELSEVIER SCIENCE BVcMAR a26-330 v3573 a

N-doped mesoporous titania was synthesized using templating method. Biopolymer chitosan was used as a template and also as a nitrogen source along with ammonium hydroxide. Three different types of N-doped mesoporous titania were synthesized by varying composition of chitosan and titania precursor. These photocatalysts were characterized using XRD, BET-SA, FTIR, UV-DRS, SEM-EDX and XPS analysis. The photocatalytic activity of mesoporous titania was studied by methyl orange (MO) photoreduction reaction. From the experimental results it was observed that the N-doped mesoporous titania (1:2) gives the highest photocatalytic reduction of MO as compared to N-doped mesoporous titania prepared with (1:1) and (1:3) stoichiometry. This could be due to the optimal level of `N' incorporation in the N-doped mesoporous titania (1:2). Photocatalysts reduce the MO dye into derivative of hydrazine. Photoactivity of N-doped mesoporous titania (1:2) is 1.0721 mg of MO reduced per g of TiO2 vis-a-vis 0.508 mg of MO reduced per g of TiO2 for Degussa P25 photocatalyst. The effect of various operating parameters like photocatalyst loading. initial concentration and intensity of light also has been studied. (C) 2009 Elsevier B.V. All rights reserved.

10abiopolymer10aChitosan10aMO photoreduction10aN-doped mesoporous titania10aVisible active photocatalyst1 aJoshi, Meenal, M.1 aLabhsetwar, Nitin, K.1 aMangrulkar, Priti, A.1 aTijare, Saumitra, N.1 aKamble, Sanjay, P.1 aRayalu, Sadhana, S. uhttps://library.ncl.res.in/content/visible-light-induced-photoreduction-methyl-orange-n-doped-mesoporous-titania-002047nas a2200253 4500008004100000022001400041245006800055210006700123260010600190300001600296490000700312520114600319653002901465653002001494653002401514653001201538653002301550100002601573700002201599700002301621700002601644700002401670856009901694 2010 eng d a0360-319900aHydrogen evolution by a low cost photocatalyst: bauxite residue0 aHydrogen evolution by a low cost photocatalyst bauxite residue aTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLANDbPERGAMON-ELSEVIER SCIENCE LTDcOCT a10859-108660 v353 a

Bauxite residue or red mud which is an aluminium industry waste has been used as a novel low cost photocatalyst active in visible light for the generation of hydrogen from water. The driving force behind the use of bauxite residue as a photocatalyst is not only the fact that it is widely available but also bauxite residue is a fine grained mixture of oxides and hydroxides (Fe(2)O(3), TiO(2), SiO(2), and Al(2)O(3), Al(OH)3). The photocatalyst was characterized with respect to BET-SA, UV-DRS, XRD, SEM and EDX. Hydrogen yield of 4600 mu mol/h/g of TiO(2) was achieved as compared to hydrogen evolution rate of 164 mu mol/h/g of TiO(2) for commercially available titania Degussa P-25. However, the hydrogen evolution was 20.85 mu mol/h/g of photocatalyst. The results suggest that bauxite residue appears to be a novel low cost photocatalyst. The various operating conditions of photocatalytic hydrogen generation were studied which include amount of catalyst, illumination intensity, illumination time, effect of various sacrificial donors etc. (C) 2009 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.

10aAluminium industry waste10aBauxite residue10aHydrogen generation10aRed mud10aSacrificial donors1 aMangrulkar, Priti, A.1 aJoshi, Meenal, V.1 aKamble, Sanjay, P.1 aLabhsetwar, Nitin, K.1 aRayalu, Sadhana, S. uhttps://library.ncl.res.in/content/hydrogen-evolution-low-cost-photocatalyst-bauxite-residue-001875nas a2200193 4500008004100000022001400041245009600055210006900151260010400220300002300324520106100347100002601408700002301434700002201457700002501479700002601504700002401530856012701554 2012 eng d a1110-662X00aPhotocatalytic degradation of phenolics by N-doped mesoporous titania under solar radiation0 aPhotocatalytic degradation of phenolics by Ndoped mesoporous tit a410 PARK AVENUE, 15TH FLOOR, \#287 PMB, NEW YORK, NY 10022 USAbHINDAWI PUBLISHING CORPORATIONcMAR aArticle No. 7805623 a

In this study, nitrogen-doped mesoporous titania was synthesized by templating method using chitosan. This biopolymer chitosan plays the dual role of acting as a template (which imparts mesoporosity) and precursor for nitrogen. BET-SA, XRD, UV-DRS, SEM, and FTIR were used to characterize the photocatalyst. The doping of nitrogen into TiO2 lattice and its state was substantiated and measured by XPS. The photocatalytic activity of the prepared N-doped mesoporous titania for phenol and o-chlorophenol degradation was investigated under solar and artificial radiation. The rate of photocatalytic degradation was observed to be higher for o-chlorophenol than that of phenol. The photodegradation of o-chlorophenol was 98.62% and 72.2%, while in case of phenol, degradation to the tune of 69.25% and 30.58% was achieved in solar and artificial radiation. The effect of various operating parameters, namely, catalyst loading, pH, initial concentration and the effect of coexisting ions on the rate of photocatalytic degradation were studied in detail.

1 aMangrulkar, Priti, A.1 aKamble, Sanjay, P.1 aJoshi, Meenal, M.1 aMeshram, Jyotsna, S.1 aLabhsetwar, Nitin, K.1 aRayalu, Sadhana, S. uhttps://library.ncl.res.in/content/photocatalytic-degradation-phenolics-n-doped-mesoporous-titania-under-solar-radiation-0