02799nas a2200253 4500008004100000022001400041245015200055210006900207260007100276300001400347490000600361520184700367653002102214653002002235653001002255653002802265653002102293653002302314100001602337700001502353700003002368700001502398856013202413 2014 eng d a1944-824400aFacile single-step synthesis of nitrogen-doped reduced graphene oxide-Mn3O4 hybrid functional material for the electrocatalytic reduction of oxygen0 aFacile singlestep synthesis of nitrogendoped reduced graphene ox a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcFEB a2692-26990 v63 a

Development of efficient electrocatalyst based on non-precious metal that favors the four-electron pathway for the reduction of oxygen in alkaline fuel cell is a challenging task. Herein, we demonstrate a new facile route for the synthesis of hybrid functional electrocatalyst based on nitrogen-doped reduced graphene oxide (N-rGO) and Mn3O4 with pronounced electrocatalytic activity towards oxygen reduction reaction (ORR) in alkaline solution. The synthesis involves one-step in situ reduction of both graphene oxide (GO) and Mn(VII), growth of Mn3O4 nanocrystals and nitrogen doping onto the carbon framework using a single reducing agent, hydrazine. The X-ray photoelectron (XPS), Raman and FTIR spectral, and X-ray diffraction measurements confirm the reduction of GO and growth of nanosized Mn3O4. The XPS profile reveals that N-rGO has pyridinic (40%), pyrrolic (53%), and pyridine N oxide (7%) types of nitrogen. The Mn3O4 nanoparticles are single crystalline and randomly distributed over the wrinkled N-rGO sheets. The hybrid material has excellent ORR activity and it favors the 4-electron pathway for the reduction of oxygen. The electrocatalytic performance of the hybrid catalyst is superior to the N-rGO, free Mn3O4 and their physical mixture. The hybrid material shows an onset potential of -0.075 V, which is 60-225 mV less negative than that of the other catalyst tested. It has excellent methanol tolerance and high durability. The catalytic current density achieved with the hybrid material at 0.1 mg cm(-2) is almost equivalent to that of the commercial Pt/C (10%). The synergistic effect of N-rGO and Mn3O4 enhances the overall performance of the hybrid catalyst. The nitrogen in N-rGO is considered to be at the interface to bridge the rGO framework and Mn3O4 nanoparticles and facilitates the electron transfer.

10aelectrocatalysis10ahybrid material10aMn3O410anitrogen-doped graphene10aoxygen reduction10asynergistic effect1 aBag, Sourav1 aRoy, Kanak1 aGopinath, Chinnakonda, S.1 aRaj, Retna uhttps://library.ncl.res.in/content/facile-single-step-synthesis-nitrogen-doped-reduced-graphene-oxide-mn3o4-hybrid-functional-002539nas a2200289 4500008004100000022001400041245014400055210006900199260000900268300001600277490000700293520157100300653002101871653001301892653001901905653001301924653001401937653000801951100002301959700002101982700001802003700002302021700001902044700002802063700003002091856012802121 2024 eng d a1944-824400aElectrocatalytic glycerol conversion: a low-voltage pathway to efficient carbon-negative green hydrogen and value-added chemical production0 aElectrocatalytic glycerol conversion a lowvoltage pathway to eff cMAY  a26130-261410 v163 a

Electrochemical glycerol oxidation reaction (GLYOR) could be a promising way to use the abundantly available glycerol for production of value-added chemicals and fuels. Completely avoiding the oxygen evolution reaction (OER) with GLYOR is an evolving strategy to reduce the overall cell potential and generate value-added chemicals and fuels on both the anode and cathode. We demonstrate the morphology-controlled palladium nanocrystals, afforded by colloidal chemistry, and their established morphology-dependent GLYOR performance. Although it is known that controlling the morphology of an electrocatalyst can modulate the activity and selectivity of the products, still it is a relatively underexplored area for many reactions, including GLYOR. Among nanocube (Pd-NC), truncated octahedron (Pd-TO), spherical and polycrystalline (Pd-PC) morphologies, the Pd-NC electrocatalyst deposited on a Ni foam exhibits the highest glycerol conversion (85%) along with 42% glyceric acid selectivity at a low applied potential of 0.6 V (vs reversible hydrogen electrode (RHE)) in 0.1 M glycerol and 1 M KOH at ambient temperature. Owing to the much favorable thermodynamics of GLYOR on the Pd-NC surface, the assembled electrolyzer requires an electricity input of only similar to 3.7 kWh/m(3) of H-2 at a current density of 100 mA/cm(2), in contrast to the requirement of >= 5 kWh/m(3) of H-2 with an alkaline/PEM electrolyzer. Sustainability has been successfully demonstrated at 10 and 50 mA/cm(2) and up to 120 h with GLYOR in water and simulated seawater.

10aelectrocatalysis10aGlycerol10agreen hydrogen10ananocube10aPalladium10aSDG1 aChauhan, Inderjeet1 aBajpai, Himanshu1 aRay, Bishakha1 aKolekar, Sadhu, K.1 aDatar, Suwarna1 aPatra, Kshirodra, Kumar1 aGopinath, Chinnakonda, S. uhttps://library.ncl.res.in/content/electrocatalytic-glycerol-conversion-low-voltage-pathway-efficient-carbon-negative-green01445nas a2200265 4500008004100000022001400041245011800055210006900173260000900242300001100251490000800262520055100270653001900821653002100840653001300861653000800874653002100882100002000903700002900923700002400952700002000976700003000996700002101026856013201047 2025 eng d a1383-586600aEuropium oxide on carbon nitride for electrocatalytic glycerol oxidation coupled with hydrogen evolution reaction0 aEuropium oxide on carbon nitride for electrocatalytic glycerol o cNOV  a1334420 v3723 a

{The integration of the electrochemical glycerol oxidation reaction (GOR) with the hydrogen evolution reaction (HER) has emerged as a promising alternative to the sluggish oxygen evolution reaction (OER) in water splitting toward the development of renewable and clean energy sources. However, suitable electrodes that facilitate redox kinetics while increasing the selectivity of the desired product(s) are still required. Herein, a series of europium oxide (Eu2O3) anchored on graphitic carbon nitride (g-CN) nanoaggregates (g-CNEux

10acarbon support10aelectrocatalysis10aGlycerol10aHER10aRare earth metal1 aJana, Jayasmita1 aSharma, Tata, Sanjay Kan1 aGhanem, Mohamed, A.1 aChoi, Won, Mook1 aGopinath, Chinnakonda, S.1 aHur, Seung, Hyun uhttps://library.ncl.res.in/content/europium-oxide-carbon-nitride-electrocatalytic-glycerol-oxidation-coupled-hydrogen-evolution02989nas a2200277 4500008004100000022001400041245016400055210006900219260000800288300001100296490000800307520198800315653002502303653002102328653002202349653001902371100002302390700002802413700002902441700002102470700001802491700001802509700002602527700003002553856012802583 2026 eng d a1385-894700aPotential tuneable glucose oxidation to selective C6 molecules and CC cleavage, and parallel green H2 production: sustainable high current density electrolysis0 aPotential tuneable glucose oxidation to selective C6 molecules a cFEB a1726330 v5293 a

Current study elucidates the electrocatalytic efficacy of palladium-nanocubes (Pd-NCs) for the selective oxidation of glucose to value-added chemicals with concomitant hydrogen evolution. The Pd-NC catalyst demonstrated exceptional activity and product selectivity, achieving nearly quantitative glucose conversion (>99 %) with high gluconic and glucaric acid yield at low anodic overpotential (0.6 V vs. RHE) in alkaline electrolyte. At not-so-high elevated potentials (1.2 V vs. RHE), oxidative CC scission prevails, yielding shorter-chain carboxylates along with C6-acids. Reaction products are thoroughly characterized and quantitatively estimated by NMR spectral methods; NMR methods also provide CC cleavage and mechanistic pathways of glucose to various products. Complementary DFT calculations delineate the thermodynamic favorability of glucose adsorption on Pd-NC surfaces (-1.83 eV) and the exergonic oxidation pathway under applied bias, corroborating experimental product distributions. In a two-electrode electrolyzer, Pd-NC anode paired with Pt/C and Ni2P cathode demonstrates 100 mA/cm(2) at 0.99 V and 1.37 V, respectively, with 48 % reduction in energy input (26.6 kWh/kg H-2) compared to conventional alkaline electrolysis; critically, H-2 production energy is lower than the usable energy (33.3 kWh/kg H-2). Sustainable chronopotentiometric assays confirm sustainability (similar to 140 h) in alkaline as well as saline electrolytes, underscoring the system's resilience against chloride-mediated corrosion. Present work establishes a proof of concept for integrated biomass-component valorization and carbon-negative green hydrogen production, merging atomic-level mechanistic insights with scalable reactor design. Optimization of reaction parameters, including potential tuning, reaction temperature and electrolyte engineering, offers a compelling strategy to further enhance C6 and fragmented product selectivity and overall system efficiency.

10abiomass valorization10aelectrocatalysis10aenergy conversion10aSustainability1 aChauhan, Inderjeet1 aPatra, Kshirodra, Kumar1 aVijay, Pothoppurathu, M.1 aNalajala, Naresh1 aMehta, Shweta1 aJoshi, Kavita1 aRavindranathan, Sapna1 aGopinath, Chinnakonda, S. uhttps://library.ncl.res.in/content/potential-tuneable-glucose-oxidation-selective-c6-molecules-and-cc-cleavage-and-parallel