02019nas a2200241   4500008004100000022001400041245009000055210006900145260000800214300001400222490000700236520121900243653001601462653001801478653001501496653003701511653001801548653002601566100001901592700001701611700003101628856011801659       2020                        eng d  a0032-388800aEnhancing the mechanical properties of 3D printed polylactic acid using nanocellulose0 aEnhancing the mechanical properties of 3D printed polylactic aci  cAUG  a1842-18550 v603 a<p>We report here a systematic investigation of the mechanical properties of polylactic acid (PLA) processed by fused filament fabrication (FFF) 3D printing vs PLA processed by compression molding. Our results show that the tensile strength and modulus of FFF-PLA is 49% and 41% lower, respectively, than compression molded samples of PLA. We also demonstrate here an approach to augment the mechanical properties of 3D printed PLA using nanocellulose. Incorporation of a small quantity (1 wt%) of cellulose nanofibers (CNF) was found to enhance the tensile strength and modulus of 3D printed PLA by 84% and 63%, respectively. X-ray microtomography was used to probe the morphology of 3D printed PLA and PLA/CNF composites. 3D printed PLA/CNF composites had significantly lesser voids as compared to neat 3D printed PLA. Differential scanning calorimetry study revealed that CNF can accelerate the nucleation and crystallization of 3D printed PLA leading to enhanced crystallinity. The thermal stability of 3D printed PLA/CNF composites was not compromised by the addition of CNF. The enhanced mechanical properties of 3D printed PLA/CNF composites can be ascribed to higher crystallinity and lesser defects.</p>
10a3D printing10aBiocomposites10acomposites10afused filament fabrication (FFF)10aNanocellulose10apolylactic acid (PLA)1 aAmbone, Tushar1 aTorris, Arun1 aShanmuganathan, Kadhiravan  uhttps://library.ncl.res.in/content/enhancing-mechanical-properties-3d-printed-polylactic-acid-using-nanocellulose02309nas a2200313   4500008004100000022001400041245009600055210006900151260000800220300001400228490000700242520130500249653001601554653001401570653001701584653001801601653002201619653001401641100003101655700002001686700002601706700001701732700002301749700001901772700002001791700002901811700003101840856012401871       2023                        eng d  a0032-388800aLuminescent 3D printed poly(lactic acid) nanocomposites with enhanced mechanical properties0 aLuminescent 3D printed polylactic acid nanocomposites with enhan  cJUL  a2059-20720 v633 a<p>
	The three-dimensional (3D) printing of functional composite materials has gained tremendous interest in recent years. Nevertheless, research on 3D printing of luminescent composite materials is very limited, and the mechanical properties of such 3D-printed composites are poor. Herein, we report the preparation and characterization of a poly(lactic acid) (PLA) composite that, when 3D printed, exhibits enhanced toughness and high solid-state fluorescence quantum yield. Incorporation of only 1 wt% pyrene butyric acid modified cellulose nanofibers (PBA-m-CNF) and l0 wt% thermoplastic polyurethane (TPU) into PLA led to 223% increase in toughness and 21% increase in tensile modulus of PLA. Scanning electron microscopy (SEM) and X-ray microcomputed tomography (mu-CT) analysis of the fractured cross-sections of 3D printed composites revealed a ductile failure mode. The PLA/PBA-m-CNF1/TPU10 3D printed composite also exhibited a high solid-state fluorescence quantum yield of 38.35%. To the best of our knowledge, this is the first report to show both enhanced mechanical properties and high solid-state fluorescence emission for 3D printable PLA. Such functional PLA composites could have potential applications in the fabrication of complex-shaped sensors, optical light pipes, etc.</p>
10a3D printing10aComposite10afluorescence10aNanocellulose10apoly(lactic acid)10atoughness1 aKothavade, Premkumar, Anil1 aYadav, Prashant1 aNidhankar, Aakash, D.1 aTorris, Arun1 aPol, Harshawardhan1 aKafi, Abdullah1 aBateman, Stuart1 aSukumaran, Santosh, Babu1 aShanmuganathan, Kadhiravan  uhttps://library.ncl.res.in/content/luminescent-3d-printed-polylactic-acid-nanocomposites-enhanced-mechanical-properties02132nas a2200301   4500008004100000022001400041245011400055210006900169260000900238490000700247520111200254653001601366653002001382653000901402653002001411653000901431100002901440700001801469700002901487700002401516700002901540700002501569700001801594700002501612700003101637700003001668856013201698       2023                        eng d  a1861-472800aThermally activated delayed fluorescent solvent-free organic liquid hybrids for tunable emission applications0 aThermally activated delayed fluorescent solventfree organic liqu  cJUL 0 v183 a<p>
	The synthetic feasibility and excellent luminescence features of organic molecules attracted much attention and were eventually found useful in lighting applications. In this context, a solvent-free organic liquid having attractive thermally activated delayed fluorescence features in bulk along with high processability has prime importance. Herein, we report a series of naphthalene monoimide-based solvent-free organic liquids exhibiting cyan to red thermally activated delayed fluorescence with luminescence quantum yields up to 80% and lifetimes between 10 to 45 mu s. An effective approach explored energy transfer between liquid donors with various emitters exhibiting tunable emission colors, including white. The high processability of liquid emitters improved the compatibility with polylactic acid and was used for developing multicolor emissive objects using 3D printing. Our demonstration of the thermally activated delayed fluorescence liquid will be much appreciated as a processable alternate emissive material suitable for large-area lighting, display, and related applications.</p>
10a3D printing10aEnergy Transfer10aOLED10aOrganic Liquids10aTADF1 aNidhankar, Aakash, D. D.1 aGoudappagouda1 aKothavade, Premkumar, D.1 aDongre, Sangram, D.1 aVeer, Sairam, Dnyaneshwa1 aDash, Soumya, Ranjan1 aRajeev, Kavya1 aUnni, K., N. Narayan1 aShanmuganathan, Kadhiravan1 aBabu, Sukumaran, Santhosh  uhttps://library.ncl.res.in/content/thermally-activated-delayed-fluorescent-solvent-free-organic-liquid-hybrids-tunable-emission02643nas a2200313   4500008004100000022001400041245012700055210006900182260000800251300001600259490000700275520158000282653001601862653001501878653002201893653002101915653002101936100001901957700002301976700002501999700002402024700003002048700002302078700002002101700001802121700003102139700003002170856012902200       2024                        eng d  a1944-824400aHighly electrostrictive salt cocrystal and the piezoelectric nanogenerator application of its 3D-printed polymer composite0 aHighly electrostrictive salt cocrystal and the piezoelectric nan  cMAY  a26406-264160 v163 a<p>
	Ionic cocrystals with hydrogen bonding can form exciting materials with enhanced optical and electronic properties. We present a highly moisture-stable ammonium salt cocrystal [CH3C6H4CH(CH3)NH2][CH3C6H4CH(CH3)NH3][PF6] ((p-TEA)(p-TEAH)PF6) crystallizing in the polar monoclinic C2 space group. The asymmetry in (p-TEA)(p-TEAH)PF6 was induced by its chiral substituents, while the polar order and structural stability were achieved by using the octahedral PF6- anion and the consequent formation of salt cocrystal. The ferroelectric properties of (p-TEA)(p-TEAH)PF6 were confirmed through P-E loop measurements. Piezoresponse force microscopy (PFM) enabled the visualization of its domain structure with characteristic ``butterfly'' and hysteresis loops associated with ferro- and piezoelectric properties. Notably, (p-TEA)(p-TEAH)PF6 exhibits a large electrostrictive coefficient (Q(33)) value of 2.02 m(4) C-2, higher than those found for ceramic-based materials and comparable to that of polyvinylidene difluoride. Furthermore, the composite films of (p-TEA)(p-TEAH)PF6 with polycaprolactone (PCL) polymer and its gyroid-shaped 3D-printed composite scaled-up device, 3DP-Gy, were prepared and evaluated for piezoelectric energy-harvesting functionality. A high output voltage of 22.8 V and a power density of 118.5 mu W cm(-3) have been recorded for the 3DP-Gy device. Remarkably, no loss in voltage outputs was observed for the (p-TEA)(p-TEAH)PF6 devices even after exposure to 99% relative humidity, showcasing their utility under extremely humid conditions.</p>
10a3D printing10acocrystals10aenergy harvesting10aferroelectricity10aPiezoelectricity1 aSahoo, Supriya1 aPanday, Rishukumar1 aKothavade, Premkumar1 aSharma, Vijay, Bhan1 aSowmiyanarayanan, Anirudh1 aPraveenkumar, Balu1 aZareba, Jan, K.1 aKabra, Dinesh1 aShanmuganathan, Kadhiravan1 aBoomishankar, Ramamoorthy  uhttps://library.ncl.res.in/content/highly-electrostrictive-salt-cocrystal-and-piezoelectric-nanogenerator-application-its-3d02056nas a2200241   4500008004100000022001400041245009200055210006900147260000800216300001400224490000700238520127500245653001601520653002801536653001401564653000901578100001801587700001601605700001901621700001901640700003101659856012401690       2026                        eng d  a0969-023900aSimple two-step gelation process to strengthen 3D printed carboxy methyl cellulose gels0 aSimple twostep gelation process to strengthen 3D printed carboxy  cMAR  a2015-20300 v333 a<p>
	Carboxymethyl cellulose (CMC) is a water-soluble cellulose ether that is widely utilized in hydrogel applications due to its exceptional water absorption and biocompatibility. This study reports a simple two step strategy to make mechanically robust CMC gels without any additional chemical crosslinkers and how it could be leveraged to strengthen 3D printed CMC gels. These hydrogels, prepared through acid-induced gelation followed by freeze-thawing, exhibited a compressive modulus of 12.4 +/- 0.92 kPa and a compressive strength of 491.0 +/- 18.1 kPa. They could be leveraged for strengthening 3D printing hydrogels of intricate shapes by direct ink writing. Small amplitude oscillatory shear (SAOS) tests indicated an order of magnitude higher storage modulus for freeze-thawed gels (FC) as compared to only acid-induced CMC gels (HCMC). Nonetheless, stress relaxation experiments revealed that FC, as well as HCMC gels, relax at similar time scales. FC gels exhibited clear birefringence under crossed polarizers, indicating molecular ordering that is consistent with the presence of ordered/crystalline domains. Such ordered domains likely contribute to the higher elastic modulus and compressive strength observed in FC gels as compared to HCMC gels.</p>
10a3D printing10aCarboxymethyl cellulose10acellulose10aGels1 aRajput, Tejas1 aSathe, Asmi1 aGopal, Animesh1 aSharma, Aakash1 aShanmuganathan, Kadhiravan  uhttps://library.ncl.res.in/content/simple-two-step-gelation-process-strengthen-3d-printed-carboxy-methyl-cellulose-gels02655nas a2200289   4500008004100000022001400041245008500055210006900140260000800209490000800217520171400225653001601939653003101955653002201986653001602008653001302024100002902037700002502066700001802091700002302109700002002132700002202152700002302174700003102197700001702228856012002245       2026                        eng d  a1022-135200aVanillin-based recyclable thermosets and their glass fiber reinforced composites0 aVanillinbased recyclable thermosets and their glass fiber reinfo  cJAN0 v2273 a<p>
	The accumulation of end-of-life plastic materials and composite reinforcement waste materials has brought much attention to developing sustainable alternatives and their re-processability. Incorporating covalent adaptable networks (CANs) into the crosslinked network bridges the concept of reversibility into the otherwise conventional non-reversible networks. This study investigates the structure-property relation in two reversible hardener systems derived from vanillin using Schiff base chemistry. The ``CAN'' systems were synthesized by condensation of vanillin with two amines, 4,4'-oxydianiline and tris(2-aminoethyl)amine, respectively, to form Va_ODA and Va_TAEA. The epoxy thermosets exhibited glass transition temperatures (T-g) of 125 degrees C and 115 degrees C, respectively, for Va_ODA and Va_TAEA, which is superior to most reversible vanillin-based systems reported. The vitrimer-thermosets exhibited promising mechanical and thermal properties, and reshaping abilities as a function of applied temperatures, indicating the dynamic nature of linkages. Chemical degradability was demonstrated by heating to 80 degrees C for 12 h in aqueous acidic medium or excess amine. The fabricated glass fiber composites exhibited good mechanical properties with tensile strength of 361 MPa and degradability in acetic acid/water mixture with a fiber recovery of &gt;98 %. The recovered glass fiber exhibited almost similar tensile strength as the virgin glass fiber, demonstrating its potential reusability. The epoxy vitrimers underwent mechanical reprocessing through hot-pressing, as well as chemical reprocessing via 3D printing and by regeneration of imine bonds to form an epoxy resin.</p>
10a3D printing10acovalent adaptable network10are-processability10aSchiff base10aVanillin1 aVeetil, Ashwani, Puthiya1 aRavikumar, Aniruddha1 aRajput, Tejas1 aSingh, Aman, Kumar1 aThakur, Tamanna1 aKrishna, Abhijith1 aPol, Harshawardhan1 aShanmuganathan, Kadhiravan1 aAsha, S., K.  uhttps://library.ncl.res.in/content/vanillin-based-recyclable-thermosets-and-their-glass-fiber-reinforced-composites