02168nas a2200241 4500008004100000022001400041245014700055210006900202260007700271300001400348490000700362520124400369653002101613653001501634653001301649653002001662653001601682100002501698700002801723700002501751700002401776856012601800 2013 eng d a2192-650600aRedox-mediated synthesis of functionalised graphene: a strategy towards 2D multifunctional electrocatalysts for energy conversion applications0 aRedoxmediated synthesis of functionalised graphene a strategy to aBOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANYbWILEY-V C H VERLAG GMBHcOCT a1296-13030 v783 a

A simple, one-step synthetic route for developing a two-dimensional multifunctional electrocatalyst is reported, by the functionalisation of graphene using oxidised ethylenedioxythiophene (O-EDOT). The mutually assisted redox reaction between graphene oxide (GO) and EDOT facilitates the reduction of GO to graphene with a concomitant deposition of O-EDOT on the surface of the graphene. The oxidised surface of GO catalyses the reaction without using an added reducing agent, so a controlled and uniform deposition of O-EDOT is ensured on the surface of graphene, which essentially prevents the restacking of the layers. UV/Visible, IR, Raman and X-ray photoelectron spectroscopy give valid evidence for the reduction and functionalisation of graphene sheets. The functional groups present on the surface of graphene are found to tune the physical and chemical properties of graphene. Consequently, the functionalised material displays enhanced electrocatalytic activity for the reduction of oxygen to water and I3- to I- relative to pristine graphene. These distinct property characteristics make the material a versatile cathode electrocatalyst for both alkaline anion-exchange membrane fuel cells and dye-sensitised solar cells.

10aelectrocatalysts10afuel cells10agraphene10aredox chemistry10asolar cells1 aUnni, SreeKuttan, M.1 aBhange, Siddheshwar, N.1 aAnothumakkool, Bihag1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/redox-mediated-synthesis-functionalised-graphene-strategy-towards-2d-multifunctional-002910nas a2200265 4500008004100000022001400041245014100055210006900196260000900265300001400274490000700288520197300295653001902268653002102287653002302308653002802331653002102359100002702380700002402407700002702431700002102458700001802479700002402497856012302521 2020 eng d a0947-653900aHierarchical nanoflower arrays of Co9S8-Ni3S2 on nickel foam: a highly efficient binder-free electrocatalyst for overall water splitting0 aHierarchical nanoflower arrays of Co9S8Ni3S2 on nickel foam a hi cJUN  a7900-79110 v263 a

Hydrogen production is vital for meeting future energy demands and managing environmental sustainability. Electrolysis of water is considered as the suitable method for H-2 generation in a carbon-free pathway. Herein, the synthesis of highly efficient Co9S8-Ni3S2 based hierarchical nanoflower arrays on nickel foam (NF) is explored through the one-pot hydrothermal method (Co9S8-Ni3S2/NF) for overall water splitting applications. The nanoflower arrays are self-supported on the NF without any binder, possessing the required porosity and structural characteristics. The obtained Co9S8-Ni3S2/NF displays high hydrogen evolution reaction (HER), as well as oxygen evolution reaction (OER), activities in 1 m KOH solution. The overpotentials exhibited by this system at 25 mA cm(-2) are nearly 277 and 102 mV for HER and OER, respectively, in 1 m KOH solution. Subsequently, the overall water splitting was performed in 1 m KOH solution by employing Co9S8-Ni3S2/NF as both the anode and cathode, where the system required only 1.49, 1.60, and 1.69 V to deliver the current densities of 10, 25, and 50 mA cm(-2), respectively. Comparison of the activity of Co9S8-Ni3S2/NF with the state-of-the-art Pt/C and RuO2 coated on NF displays an enhanced performance for Co9S8-Ni3S2/NF both in the half-cell as well as in the full cell, emphasizing the significance of the present work. The post analysis of the material after water electrolysis confirms that the surface Co(OH)(2) formed during the course of the reaction serves as the favorable active sites. Overall, the activity modulation achieved in the present case is attributed to the presence of the open-pore morphology of the as formed nanoflowers of Co9S8-Ni3S2 on NF and the simultaneous presence of the surface Co(OH)(2) along with the highly conducting Co9S8-Ni3S2 core, which facilitates the adsorption of the reactants and subsequently its conversion into the gaseous products during water electrolysis.

10acobalt sulfide10aelectrocatalysts10aHydrogen evolution10aoverall water splitting10aoxygen evolution1 aIllathvalappil, Rajith1 aWalko, Priyanka, S.1 aKanheerampockil, Fayis1 aBhat, Suresh, K.1 aDevi, Nandini1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/hierarchical-nanoflower-arrays-co9s8-ni3s2-nickel-foam-highly-efficient-binder-free02183nas a2200253 4500008004100000022001400041245012000055210006900175260000800244300001200252490000600264520129000270653002101560653001501581653001301596653003001609100002801639700002701667700002901694700002901723700002501752700002401777856012801801 2021 eng d a2366-748600aIn situ preparation of ionomer as a tool for triple-phase boundary enhancement in 3D graphene supported Pt catalyst0 aIn situ preparation of ionomer as a tool for triplephase boundar cJAN a20001250 v53 a

For improving the performance of platinum electrocatalysts in polymer electrolyte membrane fuel cells (PEMFCs), it is important to enhance the Pt utilization level in the catalyst systems. A high performing electrocatalyst (Pt/3DNG) is developed for PEMFC applications by using nitrogen-doped 3D graphene (3DNG) as the support material and an in situ grafted active ``triple-phase boundary'' to more precisely control the formation of the proton conducting ionomer interface at the active sites. Considering the 3D morphology of the system, during the electrode fabrication for realistic single-cell evaluation, the concept of in situ generation of the proton conducting-ionomer based ``active triple-phase boundary'' is introduced, which could potentially replace the conventional method of using Nafion ionomer for the electrode preparation. The monomers owing to their small-size can access the pores and inner regions of the 3DNG support, which on UV-curing, undergo polymerization and transform into an ionomer with an extended interfacial network into the nanoregimes of 3DNG. Single cell evaluation of the membrane electrode assembly in a high-temperature PEMFC by using phosphoric acid doped polybenzimidazole membrane demonstrates the utility of the present strategy.

10aelectrocatalysts10afuel cells10agraphene10aoxygen reduction reaction1 aGangadharan, Pranav, K.1 aVijayakumar, Vidyanand1 aNediyirakkal, Shijil, A.1 aFernandez, Roshni, Tresa1 aSiddharthan, Adhrika1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/situ-preparation-ionomer-tool-triple-phase-boundary-enhancement-3d-graphene-supported-pt