02003nas a2200241 4500008004100000022001400041245007700055210006900132260006800201300001400269490000800283520114800291653001801439653002301457653003101480653002501511653002001536100002701556700002301583700002201606700002201628856011101650 2006 eng d a0021-899500aSurface modification of polyacrylonitrile based ultrafiltration membrane0 aSurface modification of polyacrylonitrile based ultrafiltration  a111 RIVER ST, HOBOKEN, NJ 07030 USAbJOHN WILEY & SONS INCcSEP a4378-43850 v1013 a

Ultrafiltration membrane based on polyacrylonitrile prepared by phase inversion method using zinc chloride as an additive showed more than 90% rejection for BSA and 90-110 Im(-2) h(-1) water flux. The surface modification of this membrane was studied using ethanolamine, triethylamine, sodium hydroxide, and potassium hydroxide solutions. The effect of base treatment time and temperature on water flux and rejection was investigated. The membranes exhibited swelling by NaOH treatment followed by deswelling by HCl post-treatment, similar to pH responsive membranes. The treatment by organic as well as inorganic bases improved water flux with a slight lowering in BSA rejection by dead-end mode type treatment. A 230% increase in water flux was achieved by sodium hydroxide treatment in crossflow mode without a noticeable pore swelling by SEM. The contact angle of the modified membranes was decreased as compared to the unmodified one indicating appreciable surface modification. As the treatment time or temperature increased, the ESCA analysis showed increased population of Na-carboxylate groups. (c) 2006 Wiley Periodicals, Inc.

10aBSA rejection10achemical treatment10apolyacrylonitrile membrane10asurface modification10aUltrafiltration1 aLohokare, Harshada, R.1 aKumbharkar, S., C.1 aBhole, Yogesh, S.1 aKharul, Ulhas, K. uhttps://library.ncl.res.in/content/surface-modification-polyacrylonitrile-based-ultrafiltration-membrane-002232nas a2200253 4500008004100000022001400041245011000055210006900165260006800234300001400302490000800316520130500324653001901629653001401648653001501662653001601677653003301693100002701726700002501753700002201778700002401800700002601824856012801850 2008 eng d a0021-899500aSynthesis, characterization, and gas permeability of aromatic polyimides containing pendant phenoxy group0 aSynthesis characterization and gas permeability of aromatic poly a111 RIVER ST, HOBOKEN, NJ 07030 USAbJOHN WILEY & SONS INCcJUN a3881-38890 v1083 a

A diamine containing a pendant phenoxy group, 1-phenoxy-2,4-diaminobenzene, was synthesized and condensed with different aromatic dianhydrides [4,4'-oxydiphthalic dianhydride, 4,4'-(hexafluoroisopropylidene)diphthalic anhydride, 3,3',4,4-benzophenone tetracarboxylic dianhydride, 3,3',4,4'-biphenyltetracorboxylic dianhydride, and pyromellitic dianhydride] by one-step synthesis at a high temperature in m-cresol to obtain polyimides in high yields. Most of the polyimides exhibited good solvent solubility and could be readily dissolved in chloroform, sym-tetrachloroethane, N,N-dimethylformamide, NN-dimethylacetamide, and nitrobenzene. Their inherent viscosities were in the range of 0.33-1.16 dL/g. Wide-angle X-ray spectra revealed that these polymers were amorphous in nature. All these polyimides were thermally stable, having initial decomposition temperatures above 500 degrees C and glass-transition temperatures in the range of 248-281 degrees C. The gas permeability of 4,4'-oxydiphthalic dianhydride and 4,4'-(hexafluoroisopropylidene)diphthalic anhydride based polyimides was investigated with pure gases: He, H-2, O-2, Ar, N-2, CH4, and CO2. A polyimide containing a -C(CF3)(2)- linkage showed a good combination of permeability and selectivity. (C) 2008 Wiley Periodicals, Inc.

10aGas permeation10amembranes10apolyimides10aselectivity10astructure-property relations1 aKothawade, Sandeep, S.1 aKulkarni, Mahesh, P.1 aKharul, Ulhas, K.1 aPatil, Anandrao, S.1 aVernekar, Subhash, P. uhttps://library.ncl.res.in/content/synthesis-characterization-and-gas-permeability-aromatic-polyimides-containing-pendant-001991nas a2200217 4500008004100000022001400041245009600055210006900151260006900220300001100289490000800300520119000308653001201498653003101510653001101541653002401552653002901576100002201605700002201627856012401649 2009 eng d a1385-894700aSelective synthesis of cumene by isopropylation of benzene using catalytic membrane reactor0 aSelective synthesis of cumene by isopropylation of benzene using aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcAPR a97-1010 v1473 a

Selective isopropylation of benzene to cumene is demonstrated using catalytic membrane reactor (CMR), to our knowledge for the first time and the performance was evaluated against conventional plug flow reactor (PFR). Almost complete elimination of byproducts like polyalkylated benzene and higher aromatics could be made possible by using CMR. These are present in significant amount when reaction is carried out with PFR. The cumene selectivity increased up to a maximum of 97.25% by CMR as against 90.05% with conventional PFR. The effect of reaction parameters that can greatly influence the process economics, such as liquid hourly space velocity (LHSV), reactant mole ratio and catalyst/reactor volume ratio were investigated. Changes in these parameters made for CMR are industrially advantageous. The process by CMR is more economical and ecofriendly than PFR as far as milder process parameters (higher LHSV, lower reactant feed mole ratio, less catalyst require, etc.) and process intensification (reaction and separation in single reactor) are concerned. The study provides new insights for benzene isopropylation reaction. (C) 2008 Elsevier B.V. All rights reserved.

10aBenzene10aCatalytic membrane reactor10acumene10aDiisopropyl benzene10aFriedel-Craft alkylation1 aBokade, Vijay, V.1 aKharul, Ulhas, K. uhttps://library.ncl.res.in/content/selective-synthesis-cumene-isopropylation-benzene-using-catalytic-membrane-reactor-001697nas a2200181 4500008004100000022001400041245012800055210006900183260011000252300001400362490000600376520092000382100002301302700001901325700002001344700002201364856012901386 2015 eng d a2040-336400aSelective interfacial synthesis of metal-organic frameworks on a polybenzimidazole hollow fiber membrane for gas separation0 aSelective interfacial synthesis of metalorganic frameworks on a  aTHOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLANDbROYAL SOC CHEMISTRYcMAR a7291-72980 v73 a

Metal-organic frameworks (MOFs) have gained immense attention as new age materials due to their tuneable properties and diverse applicability. However, efforts on developing promising materials for membrane based gas separation, and control over the crystal growth positions on polymeric hollow fiber membranes still remain key challenges. In this investigation, a new, convenient and scalable room temperature interfacial method for growing MOFs (ZIF-8 and CuBTC) on either the outer or inner side of a polybenzimidazole based hollow fiber (PBI-BuI-HF) membrane surface has been achieved in a controlled manner. This was made possible by the appropriate selection of an immiscible solvent pair and the synthetic conditions. The growth of MOFs on the PBI-BuI-HF membrane by the interfacial method was continuous and showed an appreciable gas separation performance, conveying promise for their applicability.

1 aBiswal, Bishnu, P.1 aBhaskar, Anand1 aBanerjee, Rahul1 aKharul, Ulhas, K. uhttps://library.ncl.res.in/content/selective-interfacial-synthesis-metal-organic-frameworks-polybenzimidazole-hollow-fiber-002506nas a2200253 4500008004100000022001400041245008900055210006900144260006700213300001200280490000700292520159100299653003501890653002501925653001501950653002501965653002201990100002602012700002602038700002402064700002202088700002802110856011402138 2016 eng d a0959-810300aSynthesis and properties of poly(arylene ether)s based on 3-pentadecyl 4,4'-biphenol0 aSynthesis and properties of polyarylene ethers based on 3pentade a111 RIVER ST, HOBOKEN 07030-5774, NJ USAbWILEY-BLACKWELLcMAY a567-5760 v653 a

A new biphenol, 3-pentadecyl 4,4-biphenol, was synthesized starting from 3-pentadecylphenol and was polycondensed with 4,4-difluorobenzophenone, 1,3-bis(4-fluorobenzoyl)benzene and bis(4-fluorophenyl)sulfone to obtain poly(arylene ether)s with biphenylene linkages in the backbone and pendent pentadecyl chains. Inherent viscosities and number-average molecular weights (M-n) of the poly(arylene ether)s were in the range 0.50 - 0.81 dL g(-1) and 2.2 x 10(4) - 8.3 x 10(4), respectively. Detailed NMR spectroscopic studies of the poly(arylene ether)s indicated the presence of constitutional isomerism which existed because of the non-symmetrical structure of 3-pentadecyl 4,4-biphenol. The poly(arylene ether)s readily dissolved in common organic solvents such as dichloromethane, chloroform and tetrahydrofuran and could be cast into tough, transparent and flexible films from their chloroform solutions. The poly(arylene ether)s exhibited T-g values in the range 35-60 degrees C which are lower than that of reference poly(arylene ether)s without pentadecyl chains. The 10% decomposition temperatures (T-10) of the poly(arylene ether)s were in the range 410-455 degrees C indicating their good thermal stability. A gas permeation study of poly(ether sulfone) containing pendent pentadecyl chains revealed a moderate increase in permeability for helium, hydrogen and oxygen. However, there was a large increase in permeability for carbon dioxide which could be attributed to the internal plasticization effect of pendent pentadecyl chains. (c) 2016 Society of Chemical Industry

10acashew nut shell liquid (CNSL)10agas permeation study10apentadecyl10apoly(arylene ether)s10athermal stability1 aTawade, Bhausaheb, V.1 aShaligram, Sayali, V.1 aValsange, Nitin, G.1 aKharul, Ulhas, K.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/synthesis-and-properties-polyarylene-ethers-based-3-pentadecyl-44-biphenol02011nas a2200289 4500008004100000022001400041245008000055210006900135260007100204300001400275490000800289520102800297100001901325700002401344700002301368700002201391700003001413700002101443700002001464700002501484700002101509700001901530700001501549700002201564700002001586856011501606 2017 eng d a0002-786300aSelf-exfoliated guanidinium-based ionic covalent organic nanosheets (iCONs)0 aSelfexfoliated guanidiniumbased ionic covalent organic nanosheet a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcMAR a2823-28280 v1383 a

Covalent organic nanosheets (CONs) have emerged as functional two-dimensional materials for versatile applications. Although pi-pi stacking between layers, hydrolytic instability, possible restacking prevents their exfoliation on to few thin layered CONs from crystalline porous polymers. We anticipated rational designing of a structure by intrinsic ionic linker could be the solution to produce self-exfoliated CONs without external stimuli. In an attempt to address this issue, we have synthesized three self-exfoliated guanidinium halide based ionic covalent organic nanosheets (iCONs) with antimicrobial property. Self-exfoliation phenomenon has been supported by molecular dynamics (MD) simulation as well. Intrinsic ionic guanidinium unit plays the pivotal role for both self-exfoliation and antibacterial property against both Gram-positive and Gram-negative bacteria. Using such iCONs, we have devised a Mixed matrix membrane which could be useful for antimicrobial coatings with plausible medical benefits.

1 aMitra, Shouvik1 aKandambeth, Sharath1 aBiswal, Bishnu, P.1 aKhayum, Abdul, M.1 aChoudhury, Chandan, Kumar1 aMehta, Mihir, R.1 aKaur, Gagandeep1 aBanerjee, Subhrashis1 aPrabhune, Asmita1 aVerma, Sandeep1 aRoy, Sudip1 aKharul, Ulhas, K.1 aBanerjee, Rahul uhttps://library.ncl.res.in/content/self-exfoliated-guanidinium-based-ionic-covalent-organic-nanosheets-icons-001815nas a2200169 4500008004100000022001500041245014400056210006900200260000900269300001200278490000800290520115400298100002101452700002201473700002801495856012201523 2018 eng d a1381-5148 00aSpiro [fluorene-9,9 '-xanthene]-containing copolymers of intrinsic microporosity: synthesis, characterization and gas permeation properties0 aSpiro fluorene99 xanthenecontaining copolymers of intrinsic micr c2018 a153-1600 v1333 aIn the present study, a new bis(catechol) containing spiro[fluorene-9,9'-xanthene], namely, 4,4'-(spiro(fluorene9,9'-xanthene]-2',7'-diyl)bis(benzene-1,2-diol) (THSFX) was designed and synthesized. Polycondensation reactions of THSFX and varying compositions of THSFX and 5,5',6,6'-tetrahydroxy-3,3,3',3'-tetramethyl-1,1'-spirobisindane (TTSBI) were carried out with 2,3,5,6-tetrafluoroterephthalonitrile (TFTPN) to obtain a homopolymer and copolymers, respectively. The organo-soluble polymers exhibited reasonably high molecular weights (23300-34,100 g/mol) and could be cast into self-standing films from their chloroform solutions. X-Ray diffraction studies indicated that PIMs were amorphous in nature. These polymers exhibited high thermal stability (T-10 = 490-510 degrees C) and possessed intrinsic microporosity with high BET surface area (360-796 m(2)/g). The gas permeation properties of SFX-PIM-25 and SFX-PIM-33 were evaluated and they exhibited high gas permeability (CO2 = 3595-4034 Barrer). The gas permeability data of SFX-PIM-25 and SFX-PIM-33 was located close to 1991 Robson upper bound for CO2/N-2, CO2/CH4 and O-2/N-2 gas pairs1 aShrimant, Bharat1 aKharul, Ulhas, K.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/spiro-fluorene-99-xanthene-containing-copolymers-intrinsic-microporosity-synthesis02571nas a2200241 4500008004100000022001400041245012400055210006900179260000900248300001000257490000700267520172200274653001501996653001902011653002802030653001402058653003302072100002102105700002602126700002202152700002802174856012702202 2018 eng d a0887-624X00aSynthesis, characterization, and gas permeation properties of adamantane-containing polymers of intrinsic microporosity0 aSynthesis characterization and gas permeation properties of adam cJAN  a16-240 v563 a

A new bis(catechol) monomer, namely, 4,4-((1r,3r)-adamantane-2,2-diyl)bis(benzene-1,2diol) (THADM) was synthesized by condensation of 2-adamantanone with veratrole followed by demethylation of the formed (1r,3r)-2,2-bis(3,4 dimethoxyphenyl)adamantane. Polycondensation of THADM and various compositions of THADM and 5,5,6,6-tetrahydroxy-3,3,3,3-tetramethylspirobisindane was performed with 2,3,5,6-tetrafluoroterephthalonitrile (TFTPN) to obtain the homopolymer and copolymers. These polymers demonstrated good solubility in common organic solvents such as dichloromethane, chloroform, and tetrahydrofuran and could be cast into tough films from their chloroform solutions. GPC analysis revealed that number average molecular weights of polymers were in the range 48,100-61,700 gmol(-1), suggesting the formation of reasonably high molecular weight polymers. They possessed intrinsic microporosity with Brunauer-Emmett-Teller (BET) surface area in the range 703-741 m(2)g(-1). Thermogravimetric analysis of polymers indicated that 10% weight loss temperature was in the range 513-518 degrees C demonstrating their excellent thermal stability. THADM-based polymer of intrinsic microporosity (PIM) showed P(CO2)=1080, P(O-2)=232 and appreciable selectivity [(CO2/CH4)=22.6, (CO2/N-2)=26.7, and (O-2/N-2)= 5.7]. The gas permeability measurements revealed that with increase in the content of adamantane units in PIMs, selectivity increased and permeability decreased, following the trade-off relationship. The gas separation properties of PIMs containing adamantane units were located close to 2008 Robeson upper bound for gas pairs such as CO2/CH4, CO2/N-2, H-2/N-2, and O-2/N-2. (c) 2017 Wiley Periodicals, Inc.

10aadamantane10aGas permeation10aintrinsic microporosity10amembranes10astructure-property relations1 aShrimant, Bharat1 aShaligram, Sayali, V.1 aKharul, Ulhas, K.1 aWadgaonkar, Prakash, P. uhttps://library.ncl.res.in/content/synthesis-characterization-and-gas-permeation-properties-adamantane-containing-polymers02426nas a2200241 4500008004100000022001400041245017000055210006900225260000800294300001600302490000700318520150000325653003101825653001701856653003101873653003501904653002701939100002601966700002201992700001702014700002202031856013102053 2024 eng d a1944-824400aScalable, interfacially synthesized, covalent-organic framework (COF)-based thin-film composite (TFC) hollow fiber membranes for organic solvent nanofiltration (OSN)0 aScalable interfacially synthesized covalentorganic framework COF cAPR a19463-194710 v163 a

Covalent organic frameworks have great potential for energy-efficient molecular sieving-based separation. However, it remains challenging to implement COFs as an alternative membrane material due to the lack of a scalable and cost-effective fabrication mechanism. This work depicts a new method for fabricating a scalable in situ COF hollow fiber (HF) membrane by an interfacial polymerization (IP) approach at room temperature. The 2D COF film was constructed on a polyacrylonitrile HF substrate using aldehyde (1,3,5-trimethylphloroglucinol, Tp) and amine (4,4 `-azodianiline (Azo) and 4,4 `,4 `'-(1,3,5-triazine- 2,4,6-triyl) trianiline (Tta)) as precursors. The COF membrane on the PAN substrate showed 99% rejection of Direct red-80 with remarkable solvent permeance. The rejection analysis revealed that the structural aspects of the solute molecule play a major role in rejection rather than the molecular weight. We further optimized the precursor concentrations to improve the permeation performance of the resulting membrane. The durability study reveals excellent stability of the membrane toward organic solvents. This study also demonstrated the easy scalability of the membrane fabrication approach. The approach was further extrapolated to fabricate a cation-based COF membrane. These charged membranes exhibited an enhanced rejection performance. Finally, this approach can facilitate industrially challenging molecular sieving applications using COF-based membranes.

10acovalent-organic framework10ahollow fiber10ainterfacial polymerization10aorganic solvent nanofiltration10aselective COF membrane1 aKunjattu, Shebeeb, H.1 aThorat, Nitin, M.1 aGawas, Saroj1 aKharul, Ulhas, K. uhttps://library.ncl.res.in/content/scalable-interfacially-synthesized-covalent-organic-framework-cof-based-thin-film-composite