02264nas a2200229   4500008004100000022001400041245010800055210006900163260009900232300001000331490000700341520139900348653001801747653001301765653001901778653001301797653002201810100002801832700002901860700002601889856011901915       2016                        eng d  a0032-386100aImproved performance of microcapsules with polymer nanocomposite wall: preparation and characterization0 aImproved performance of microcapsules with polymer nanocomposite  aTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLANDbELSEVIER SCI LTDcJAN  a27-330 v833 a<p>Polyurea/clay nanocomposite microcapsules containing dimethyl phthalate (DMP) as a model compound were prepared by interfacial polymerization technique. Nanoclays namely, montmorillonite Na+ (MMT) and Laponite were incorporated into microcapsule wall and their effects on morphology, thermal properties and release of DMP from microcapsules were investigated. All microcapsules were characterized using scanning electron microscope (SEM), X-ray diffraction (XRD), transmission electron microscope (TEM), thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy. The present preparation process results in formation of polyurea/clay nanocomposite microcapsule wall with intercalated clay layered as evidenced by XRD and TEM. Nanocomposite microcapsules have shown significant reduction in release of DMP and change in release mechanism as compared to the pristine microcapsules. Nanocomposite microcapsules show good improvement in the fracture strength as compared to pristine microcapsules. The approach used herein is simple and can be adopted to many other polymeric microcapsule systems prepared by different microencapsulation techniques, requiring reduction in release rate and/or mechanism for several applications like pharmaceuticals, agrochemicals, industrially important chemicals, consumer products, etc. (C) 2015 Elsevier Ltd. All rights reserved.</p>10aMicrocapsules10aNanoclay10aNanocomposites10aPolyurea10aRelease mechanism1 aJagtap, Siddheshwar, B.1 aMohan, Muthu, Subramania1 aShukla, Parshuram, G.  uhttps://library.ncl.res.in/content/improved-performance-microcapsules-polymer-nanocomposite-wall-preparation-and-001889nas a2200229   4500008004100000245010700041210006900148260000800217300001000225490000800235520107000243100002801313700002201341700002101363700001501384700002901399700002601428700002201454700002601476700003101502856012601533       2018                        eng d00a Functionalized carbon nanotube reinforced polymer nanocomposite microcapsules with enhanced stiffness0 aFunctionalized carbon nanotube reinforced polymer nanocomposite   cAUG  a82-890 v5503 aMicrocapsules with tunable mechanical properties are highly desirable in pressure sensitive applications. We report here a facile approach to prepare polyurea/multiwall carbon nanotube (MWCNTs) nanocomposite microcapsules (MICs) with enhanced stiffness. A model compound dimethyl phthalate (DMP) was used as core material. MWCNTs were modified with reactive functional groups namely carboxyl (-COOH), amines (-NH2), and isocyanates (-NCO) to ensure a stronger interface between polymer wall and MWCNTs. Functionalization of MWCNTs was corroborated by Fourier transformed infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) was employed to study the surface morphology of MICs. The presence of MWCNTs in the microcapsule wall was confirmed by transmission electron microscopy (TEM). MICs with functionalized MWCNTs show almost 100% increase in stiffness with respect to pristine capsules. All MICs show 92-97 +/- 1% encapsulation efficiency. The approach used in this paper can be broadly utilized to tune the mechanical properties of the microcapsules.1 aJagtap, Siddheshwar, B.1 aPatil, Vishal, D.1 aSuresh, Karthika1 aRam, Farsa1 aMohan, Muthu, Subramania1 aRajput, Shatruhan, S.1 aPatil, Shivprasad1 aShukla, Parshuram, G.1 aShanmuganathan, Kadhiravan  uhttps://library.ncl.res.in/content/functionalized-carbon-nanotube-reinforced-polymer-nanocomposite-microcapsules-enhanced