01661nas a2200193   4500008004100000022001400041245011900055210006900174260005700243300001200300490000700312520090000319100002701219700001601246700002501262700001901287700003301306856012801339       2009                        eng d  a0947-839600aEffect of nickel nanofillers on the dielectric and magnetic properties of composites based on rubber in the X-band0 aEffect of nickel nanofillers on the dielectric and magnetic prop  a233 SPRING ST, NEW YORK, NY 10013 USAbSPRINGERcOCT  a157-1650 v973 a<p>Nickel-rubber nanocomposites were synthesized by incorporating ferromagnetic nickel nanoparticles in a natural rubber as well as neoprene rubber matrix. Complex dielectric permittivity and magnetic permeability of these composites were evaluated in the X-band microwave frequencies at room temperature using cavity perturbation technique. The dielectric loss in natural rubber is smaller compared to neoprene rubber. A steady increase in the dielectric permittivity is observed with increase in the content of nickel in both the composites. The magnetic permeability exhibits a steady decrease with increase in frequency and magnetic loss shows a relaxation at 8 GHz. The suitability of these composites as microwave absorbers is modeled based on the reflection loss which is dependant on the real and imaginary components of the complex dielectric permittivity and magnetic permeability.</p>1 aJamal, Muhammad, Abdul1 aMohanan, P.1 aJoy, Pattayil, Alias1 aKurian, Philip1 aAnantharaman, Maliemadom, R.  uhttps://library.ncl.res.in/content/effect-nickel-nanofillers-dielectric-and-magnetic-properties-composites-based-rubber-x-001783nas a2200265   4500008004100000022001400041245007000055210006900125260006900194300001200263490000800275520088300283653002401166653002501190653002501215653002301240653001901263653001901282100001901301700001901320700001601339700002501355700003301380856010401413       2010                        eng d  a0925-838800aFlexible microwave absorber based on nickel ferrite nanocomposite0 aFlexible microwave absorber based on nickel ferrite nanocomposit  aPO BOX 564, 1001 LAUSANNE, SWITZERLANDbELSEVIER SCIENCE SAcJAN  a297-3030 v4893 a<p>Flexible magnetic composite materials were prepared by incorporating precharacterized nickel ferrite nanoparticles in a natural rubber matrix. The complex dielectric permittivity and magnetic permeability of the composites were measured at different microwave frequencies using the cavity perturbation technique. A steady increase in dielectric permittivity was observed with increase in filler concentration. Maxwell-Garnett mixture equations were employed to model the effective permittivity and permeability of the composite. Reflection loss was estimated by employing the model of single layer absorber backed with a perfect conductor. Reflection loss minima of -5.9 dB at 3.2 GHz for 12 mm thick rubber ferrite composite sheet is obtained in the S-band while a loss up to -16 dB could be achieved at 9.5 GHz in the X-band. (C) 2009 Elsevier B.V. All rights reserved.</p>10aCavity perturbation10aComplex permeability10aComplex permittivity10aMicrowave absorber10aNanocomposites10aNickel ferrite1 aSunny, Vijutha1 aKurian, Philip1 aMohanan, P.1 aJoy, Pattayil, Alias1 aAnantharaman, Maliemadom, R.  uhttps://library.ncl.res.in/content/flexible-microwave-absorber-based-nickel-ferrite-nanocomposite-001908nas a2200217   4500008004100000022001400041245012100055210006900176260012500245300001100370490000800381520101800389100001901407700002001426700001901446700001601465700001901481700002501500700003301525856013201558       2014                        eng d  a0021-897900aFlexible microwave absorbers based on barium hexaferrite, carbon black, and nitrile rubber for 2-12 GHz applications0 aFlexible microwave absorbers based on barium hexaferrite carbon   aCIRCULATION & FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USAbAMER INST PHYSICScJUL  a0249020 v1163 a<p>Flexile single layer electromagnetic wave absorbers were designed by incorporating appropriate amounts of carbon black in a nitrile butadiene rubber matrix along with an optimized amount of magnetic counterpart, namely, barium hexaferrite for applications in S, C, and X-bands. Effective dielectric permittivity and magnetic permeability were measured using cavity perturbation method in the frequency range of 2-12 GHz. The microwave absorbing characteristics of the composites were studied in the S, C, and X-bands employing a model in which an electromagnetic wave is incident normally on a metal terminated single layer. Reflection loss exceeding -20 dB is obtained for all the samples in a wide frequency range of 2-12 GHz when an appropriate absorber thickness between 5 and 9 mm is chosen. The impact of carbon black is clearly observed in the optimized composites on the mechanical strength, thickness, band width of absorption, dielectric properties, and absorptivity. (C) 2014 AIP Publishing LLC.</p>1 aVinayasree, S.1 aSoloman, M., A.1 aSunny, Vijutha1 aMohanan, P.1 aKurian, Philip1 aJoy, Pattayil, Alias1 aAnantharaman, Maliemadom, R.  uhttps://library.ncl.res.in/content/flexible-microwave-absorbers-based-barium-hexaferrite-carbon-black-and-nitrile-rubber-2-12-002207nas a2200289   4500008004100000022001400041245010800055210006900163260000900232300001100241490000700252520125200259653001701511653002901528653001501557653003001572653002501602100001901627700003001646700001601676700002001692700001701712700001601729700001601745700002501761856013101786       2019                        eng d  a0957-448400aStealth emulsion based on natural rubber latex, core-shell ferrofluid/carbon black in the S and X bands0 aStealth emulsion based on natural rubber latex coreshell ferrofl  cAUG   a3157030 v303 a<p>A lossy dielectric with an appropriate magnetic property is one of the requirements of a stealth material. The thickness of the absorber and the corresponding bandwidth of absorption are also other deciding factors that determine the choice of the material as microwave absorbers. A stable emulsion, which is lossy as well as magnetic, is promising, since it can be coated on surfaces with required thickness in the desired band. A magnetic nanofluidic emulsion serves the purpose. A microwave absorbing emulsion based on natural rubber latex with core-shell magnetic nanoparticles, based on superparamagnetic iron oxide nanoparticles (SPIONs), was developed. The effect of additives like carbon black on the bandwidth of absorption was also studied as a function of weight percentage of carbon black. The complex dielectric permittivity and magnetic permeability were evaluated using a vector network analyser in the S and X bands. Furthermore, these results were modelled using surface impedance equations. These investigations revealed that the incorporation of carbon black enhances the bandwidth of absorption and an emulsion with the required dielectric permittivity and magnetic permeability can be tailored for stealth applications.</p>10acarbon black10acore-shell nanoparticles10aferrofluid10amicrowave absorbing paint10anatural rubber latex1 aVinayasree, S.1 aNair, Ajalesh, Balachandr1 aMani, Manoj1 aArchana, V., N.1 aJoseph, Rani1 aMohanan, P.1 aJoy, P., A.1 aAnantharaman, M., R.  uhttps://library.ncl.res.in/content/stealth-emulsion-based-natural-rubber-latex-core-shell-ferrofluidcarbon-black-s-and-x-bands