02817nas a2200229   4500008004100000022001400041245015400055210006900209260000900278300001400287490000600301520197100307100001802278700002902296700001702325700002302342700002802365700002102393700001802414700003002432856012502462       2024                        eng d  a2398-490200aDesign of Bi-functional mixed oxide electrodes for selective oxidative C-C cleavage of glycerol to formate and synchronized green hydrogen production0 aDesign of Bifunctional mixed oxide electrodes for selective oxid  cJUN   a2954-29680 v83 a<p>
	Alkaline water electrolysis is a mature method to produce green hydrogen; however, it suffers from significantly high cost as high overpotentials are required for the oxygen evolution reaction (OER). However, the OER could be avoided altogether by replacing it with kinetically favorable oxidation of abundantly available feedstock molecules at a significantly low potential to value-added product(s) together with green hydrogen generation. This is a potential method to address the high cost of green hydrogen production while converting waste to wealth. Herein, we report green, template-free hydrothermal synthesis of an electrochemically active NiCoMn mixed oxide (NCMO) electrocatalyst with multiple sites, porous structure, large surface area, and nanoneedle (NN) morphology deposited directly over Ni foam (NF). Sustainable electrocatalytic performance was demonstrated for 120 h in 0.2 M alkaline glycerol using chronoamperometry and chronopotentiometry. Highly selective formate production demonstrated an exclusive C-C cleavage with the present catalyst system. Oxides of individual metal-ions (Ni, Co, and Mn) and their bimetallic combination (NiCo, NiMn, and CoMn) exhibited lower activity and product selectivity than the trimetallic NCMO electrocatalyst. The membrane-free two-electrode electrolyzer setup with NCMO/NF at both the anode and cathode (NCMO/NF &amp; Vert;NCMO/NF) requires 1.63 V to accomplish 100 mA cm-2 with 0.2 M glycerol, which is 296 mV less than that of 1 M KOH solution. High faradaic efficiency was observed for hydrogen (98%) with highly selective formate (90%) production. Electrocatalytic formate generation from an alkaline glycerol solution with NCMO is an energy-efficient and promising approach that also supplies carbon-negative green H2. NiCoMn oxide nanoneedles with a cactus-like morphology are shown as bifunctional electrocatalysts that selectively oxidize glycerol to HCOOH and concurrently produce H2.</p>
1 aSaha, Arindam1 aMurugiah, Vasantharadevi1 aRanjan, Ravi1 aChauhan, Inderjeet1 aPatra, Kshirodra, Kumar1 aBajpai, Himanshu1 aSaha, Avisekh1 aGopinath, Chinnakonda, S.  uhttps://library.ncl.res.in/content/design-bi-functional-mixed-oxide-electrodes-selective-oxidative-c-c-cleavage-glycerol02563nas a2200241   4500008004100000022001400041245015400055210006900209260000900278300001600287490000700303520167200310653002201982653001602004653002202020653001402042653002302056100001802079700002902097700003502126700003002161856013002191       2025                        eng d  a2168-048500aSelective anodic transformation of glycerol with ZnCo 2 O 4 2D nanoplates: sustainable coproduction of carbon-negative green hydrogen and formic acid0 aSelective anodic transformation of glycerol with ZnCo 2 O 4 2D n  cJUL   a11458-114730 v133 a<p>
	In the pursuit of sustainable green hydrogen production, the electrooxidation of abundantly available carbon-containing molecules at a significantly low voltage presents a promising pathway, helping to reduce the cost of hydrogen generation while simultaneously yielding value-added chemicals/fuels. In the current study, we report the template-free green synthesis of ZnCo2O4 directly on Ni-foam (NF), demonstrating anodic stability and bifunctional electrocatalytic activity toward alkaline (1 M KOH) glycerol oxidation over an extended duration of 230 h at 50 mA cm- 2. The catalyst's high electrochemical surface area contributes to its remarkable performance, enabling sustained high current density. Compared with monometallic (ZnO or Co3O4) oxides, ZnCo2O4 oxide reveals superior catalytic performance. The two-electrode electrolyzer setup (ZnCo2O4 oxide/NF || ZnCo2O4 oxide/NF) operates at a significantly low cell potential of 1.9 V to achieve 100 mA cm- 2 in 0.2 M glycerol, which is 180 mV lower than that of conventional 1 M KOH solution. The three-electrode setup achieved 1 A/cm2 current density at 1.907 V vs RHE. Both anodic and cathodic processes exhibit high Faradaic efficiency, achieving 98% efficiency for H2 and 90% selectivity toward formate generation, along with significant methanol production. This demonstrates efficient C-C bond cleavage capability with glycerol to predominantly C1-products. The electrocatalytic formate production from alkaline glycerol using ZnCo2O4 offers an energy-efficient pathway, facilitating carbon-negative green hydrogen generation, thus contributing to a cleaner and sustainable energy landscape.</p>
10aenergy conversion10aFormic acid10aglyceroloxidation10agreen H-210awater electrolysis1 aSaha, Arindam1 aMurugiah, Vasantharadevi1 aKollenteakathootu, Jayalakshmi1 aGopinath, Chinnakonda, S.  uhttps://library.ncl.res.in/content/selective-anodic-transformation-glycerol-znco-2-o-4-2d-nanoplates-sustainable-coproduction