03527nas a2200157   4500008004100000022001400041245021900055210006900274260000800343300001400351490000600365520281300371100003003184700003103214856012403245       2022                        eng d  a2051-815300aSynthesis of 2D MoO3-x/N-doped-carbon nanocomposites via in situ carbonization of layered (NH4)Mo3O9-(NH4)(2)Mo4O13-organic hybrid nanomaterials for exceptionally efficient adsorption and separation of organic dyes0 aSynthesis of 2D MoO3xNdopedcarbon nanocomposites via in situ car  cDEC  a4508-45230 v93 a<p>
	MoO3-x/N-doped-carbon (MoO3-x/N-C) nanocomposites with nanobelt structures were prepared by the in situ carbonization of the (NH4)Mo3O9-(NH4)(2)Mo4O13/oleylamine-oleic acid hybrids, and were designed using a two-step tailored nanoemulsion method followed by a solvothermal process. The MoO3-x/N-C nanocomposites possess high stability in a wide pH range of 1-11. In addition to the formation mechanism, detailed studies on adsorption properties, including adsorption isotherms, kinetics, mechanism, and reusability of the MoO3-x/N-C nanocomposites were systematically studied. The effects of various parameters on the adsorption characteristics, such as adsorbate concentration, contact time, pH, and temperature, were also evaluated. The detailed investigation of the kinetics and adsorption mechanism of MB from an aqueous solution showed that the adsorption process follows a pseudo-second-order kinetics and intraparticle diffusion model. The adsorption isotherm study demonstrated that the Langmuir isotherm model could illustrate the experimental data with a maximum adsorption capacity value of similar to 1360 mg g(-1), which turns out to be the highest among the previously reported adsorbents based on MoO3 nanomaterials, and is attributed to multiple adsorption mechanisms including electrostatic, pi-pi stacking, and H-bonding interactions between the MB dye and the MoO3-x/N-C nanocomposites. Thermodynamic analysis suggested that MB adsorption onto the MoO3-x/N-C nanocomposites was spontaneous and endothermic. Additionally, the adsorption and desorption cycles were examined for 100 ppm aqueous MB solution, where the removal efficiency by the MoO3-x/N-C nanocomposites remained at similar to 99% even after four regeneration cycles. Furthermore, the MoO3-x/N-C nanocomposites could selectively adsorb MB from a binary solution mixture containing two times higher concentrations of an anionic dye, methyl orange (MO), and the separation efficiency obtained was similar to 99% at neutral pH. More significantly, the MoO3-x/N-C nanocomposites could successfully and simultaneously adsorb several cationic dyes, including MB, malachite green (MG), crystal violet (CV), safranin O (SO), and separate an anionic dye, MO, from quaternary and pentanary dye mixture solutions with a separation efficiency of similar to 75% and 62%, respectively, at neutral pH. To the best of our knowledge, the effective separation of a single component by molybdenum oxide-based nanomaterials via a simple batch separation technique from a four/five-component mixed interfering analyte, close to a real matrix system, in an aqueous medium at neutral pH has not been reported so far. Therefore, the MoO3-x-based nanocomposite could be a new promising material for application in dye wastewater treatment.</p>
1 aGaikwad, Supriya, Hanmant1 aMukherjee, Shatabdi, Porel  uhttps://library.ncl.res.in/content/synthesis-2d-moo3-xn-doped-carbon-nanocomposites-situ-carbonization-layered-nh4mo3o9