01761nas a2200241   4500008004100000022001400041245010700055210006900162260000800231300001400239490000700253520094400260653002101204653001701225653001601242100002801258700002601286700001701312700001801329700002201347700001801369856013201387       2022                        eng d  a1546-542X00aAddressing challenges in sealing of scalable multifiber module for O-2 enrichment using LSCF membranes0 aAddressing challenges in sealing of scalable multifiber module f  cMAY  a1561-15710 v193 a<p>
	Scalable and multifiber modules in oxygen separation face huge challenges due to difficulty in integrating all the necessary components, especially in sealing the fibers in a gas tight module. Here, we report our findings on design and fabrication of a multifiber La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF)-based module, which can be scaled up. The focus is on sealing ceramic-metal interfaces by layering of sealants of varying thermal properties. We have also incorporated the use of dead ended fibers to minimize ceramic-metal interfaces in the hot zones and present a new method for dead ending by flame melting. Pressurizing the air inlet feed from either bore side or shell side is detrimental to the structural integrity of the fibers. A thorough characterization of the fresh and spent fibers is also carried out using X-ray tomography and electron microscopy, which indicates effect of temperature and pressure on the fibers.</p>
10aCharacterization10apermeability10aPerovskites1 aJogdand, Shunottara, M.1 aBedadur, Prachiti, R.1 aTorris, Arun1 aAgrawal, Ravi1 aKharul, Ulhas, K.1 aDevi, Nandini  uhttps://library.ncl.res.in/content/addressing-challenges-sealing-scalable-multifiber-module-o-2-enrichment-using-lscf-membranes03221nas a2200313   4500008004100000022001400041245015500055210006900210260000900279300001600288490000700304520212700311653002402438653002502462653003102487653001502518653002602533100002802559700001802587700002702605700002602632700002002658700002702678700001702705700001802722700002202740700001802762856012702780       2025                        eng d  a1944-824400aUnderstanding the structural characteristics of modified ceramic hollow fiber oxygen transport membranes through in silico tomography simulation study0 aUnderstanding the structural characteristics of modified ceramic  cJUL   a43820-438290 v173 a<p>
	Design and development of integrated membrane reactor systems are gaining attention as a sustainable solution capable of performing multiple functions in a single reactor. Membrane reactors made of mixed ionic-electronic conduction materials dosing pure O to the reactions can be exploited for various catalytic processes. In this case, micro- and macrostructures of the membrane surface play a significant role in the permeation performance of membranes, and understanding these parameters prior to scaling up to modules is imperative. Here, 3D X-ray tomography imaging, a versatile nondestructive instrumental technique, is used in understanding the structural behavior of the membrane walls at different structural alignments, leading to anticipation of fouling areas upon assembling membrane reactors. La0.6Sr0.4Co0.2Fe0.8O3-delta hollow fiber membranes are fabricated by the phase inversion method and further modified by the optimized acid etching technique. In silico simulations on different morphologies before and after surface modifications are carried out under varying flow rates at nonambient temperatures to mimic real experimental conditions. Critical parameters such as gas velocity, pressure exerted on cavity walls, and strain, dictating structural integrity of the fibers under experimental conditions, were evaluated. As a result of the assessment, the surface-modified structural morphology with finger-like cavities initiating from the inner wall of the membrane was found to be robust. Increase in the pore size, nonuniform pore size distribution, and irregular and interdigitated cavities formed in outer fingered membranes after multiple surface treatments led to an similar to 5 fold increase in the average pressure exerted at the cavity walls when compared to inner fingered membranes. Strain profile generated for inner fingered membranes shows homogeneous distribution of strain for the applied stress throughout the 3D geometry of the membrane. This detailed structural analysis of the membrane will help in building a more robust and efficient system for scale-up applications.</p>
10a3D X-ray tomography10ain silico simulation10aoxygen transport membranes10aperovskite10aphase inversionmethod1 aJogdand, Shunottara, M.1 aSharma, Jyoti1 aKhilari, Rushikesh, S.1 aMahajan, Digvijay, P.1 aPatil, Prashant1 aPol, Harshavardhan, V.1 aTorris, Arun1 aAgrawal, Ravi1 aKharul, Ulhas, K.1 aDevi, Nandini  uhttps://library.ncl.res.in/content/understanding-structural-characteristics-modified-ceramic-hollow-fiber-oxygen-transport