02832nas a2200265 4500008004100000022001400041245012000055210006900175260000900244300001400253490000600267520190400273653002502177653001802202653001702220653003102237653003002268653002102298100002102319700002302340700003002363700001702393700002402410856013202434 2021 eng d a2574-096200aZinc-air batteries catalyzed using Co3O4 nanorod-supported N-doped entangled graphene for oxygen reduction reaction0 aZincair batteries catalyzed using Co3O4 nanorodsupported Ndoped  cMAY  a4570-45800 v43 a

The work reported here deals with the development of an efficient non-platinum electrocatalyst for electrochemical oxygen reduction reaction (ORR) through a sequential pathway involving hydrothermal treatment followed by freeze-drying to build the desired structural architecture of the catalyst. The designed catalyst (Co3O4/nitrogen-doped entangled porous 3D graphene (NEGF)), which contains Co3O4 nanorods anchored on the surface of three-dimensional (3D)-structured N-doped graphene, was found to display higher ORR activity during single-electrode testing and demonstrate a Zn-air battery (ZAB) system. Under the hydrothermal treatment at 180 degrees C, in the presence of ammonia, nitrogen was doped into the carbon framework of graphene, which subsequently formed a self-assembled entangled 3D structure of graphene after freeze-drying. The hydrothermal treatment and freeze-drying processes were found to play vital roles in tuning the morphological and structural features of the catalyst. The doped nitrogen, apart from its favorable contribution toward ORR, helped facilitate efficient dispersion of oxide nanorods on graphene. Co3O4/NEGF displayed remarkable ORR activity in 0.1 M KOH solution, as evident from the 60 mV onset potential shift compared to the state-of-the-art Pt/C catalyst and the Tafel slope value of 74 mV dec(-1) vs 68 mV dec(-1) for Pt/C. The ZAB fabricated by employing Co3O4/NEGF as the cathode catalyst was found to be an efficient competitor for the system based on the Pt/C cathode. This high performance has been credited to the controlled interplay of the governing factors such as the interfacial interactions leading to the efficient dispersion of metal oxide nanorods, increased catalyst surface area, the cooperative effect arising from the defects present in the N-doped porous 3D graphene, and the synergetic interactions operating in the system.

10acobalt-oxide nanorod10afreeze-drying10ahydrothermal10aN-doped entangled graphene10aoxygen reduction reaction10azinc-air battery1 aManna, Narugopal1 aSingh, Santosh, K.1 aKharabe, Geeta, Pandurang1 aTorris, Arun1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/zinc-air-batteries-catalyzed-using-co3o4-nanorod-supported-n-doped-entangled-graphene-oxygen02781nas a2200229 4500008004100000022001400041245012800055210006900183260000800252300001600260490000700276520196500283100003002248700002102278700002002299700002302319700001802342700001802360700001802378700002402396856013102420 2022 eng d a2050-748800aPseudo-boehmite AlOOH supported NGr composite-based air electrode for mechanically rechargeable Zn-air battery applications0 aPseudoboehmite AlOOH supported NGr compositebased air electrode  cMAY a10014-100250 v103 a

Both mechanically and electrically rechargeable zinc-air batteries (ZABs) have received much interest due to their high energy density and suitability for mobile and stationary applications. However, their commercialization has been impeded by the lack of robust, low-cost and environmentally benign catalyst materials that can be easily scaled up. In this context, the present work introduces a new type of transition metal-free catalytic material (AlOOH/NGr) by anchoring the pseudo-boehmite phase of aluminium oxyhydroxide (AlOOH) nanosheets over nitrogen-doped graphene (NGr) via a single-step and straightforward hydrothermal process. Furthermore, density functional theory (DFT) based computation demonstrates that the nucleation of AlOOH starts from the N-sites and points towards the strong surface interaction between AlOOH and NGr via doped nitrogen. AlOOH/NGr consisting of thin layered pseudo-boehmite sheets uniformly distributed over NGr has displayed an oxygen reduction reaction onset potential of 0.83 V and a half-wave potential of 0.72 V, along with good catalytic durability in alkaline medium. With this, AlOOH/NGr, when used as an air electrode for fabricating a primary Zn-air battery, the system has exhibited an open circuit voltage of similar to 1.27 V with a flat discharge profile at a current rate of 10 mA cm(-2). The fabricated system delivered a specific capacity of similar to 720 mA h g(-1) and a high power density of 204 mW cm(-2) and is comparable to the counterpart system based on the state-of-the-art Pt/C (20 wt% Pt) cathode. Additionally, the homemade battery was able to maintain its performance after 4 times of mechanical recharging of the battery, which lasted for more than 35 h at a discharge current density of 10 mA cm(-2). Thus, we have uncovered the potential of an earth-abundant metal-based catalytic system for fabricating and demonstrating a robust mechanically rechargeable zinc-air battery.

1 aKharabe, Geeta, Pandurang1 aManna, Narugopal1 aNadeema, Ayasha1 aSingh, Santosh, K.1 aMehta, Shweta1 aNair, Aathira1 aJoshi, Kavita1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/pseudo-boehmite-alooh-supported-ngr-composite-based-air-electrode-mechanically-rechargeable02689nas a2200337 4500008004100000022001400041245014200055210006900197260000800266490000700274520145100281653004201732653003801774653002701812653003601839653003601875653002801911653002301939100002001962700003001982700002702012700003002039700002702069700002402096700002102120700001802141700001802159700002602177700002402203856012402227 2023 eng d a1613-681000aActive site engineering and theoretical aspects of ``Superhydrophilic'' nanostructure array enabling efficient overall water electrolysis0 aActive site engineering and theoretical aspects of Superhydrophi cDEC0 v193 a

The rational design of noble metal-free electrocatalysts holds great promise for cost-effective green hydrogen generation through water electrolysis. In this context, here, the development of a superhydrophilic bifunctional electrocatalyst that facilitates both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline conditions is demonstrated. This is achieved through the in situ growth of hierarchical NiMoO4@CoMoO4 center dot xH(2)O nanostructure on nickel foam (NF) via a two-step hydrothermal synthesis method. NiMoO4@CoMoO4 center dot xH(2)O/NF facilitates OER and HER at the overpotentials of 180 and 220 mV, respectively, at the current density of 10 mA cm(-2). The NiMoO4@CoMoO4 center dot xH(2)O/NF parallel to NiMoO4@CoMoO4 center dot xH(2)O/NF cell can be operated at a potential of 1.60 V compared to 1.63 V displayed by the system based on the Pt/C@NF parallel to RuO2@NF standard electrode pair configuration at 10 mA cm(-2) for overall water splitting. The density functional theory calculations for the OER process elucidate that the lowest Delta G of NiMoO4@CoMoO4 compared to both Ni and NiMoO4 is due to the presence of Co in the OER catalytic site and its synergistic interaction with NiMoO4. The preparative strategy and mechanistic understanding make the windows open for the large-scale production of the robust and less expensive electrode material for the overall water electrolysis.

10adensity functional theory (DFT) study10ahydrogen evolution reaction (HER)10aHydrothermal synthesis10aoxygen evolution reaction (OER)10asuperhydrophilic nanostructures10asynergistic interaction10awater electrolysis1 aBarik, Sidharth1 aKharabe, Geeta, Pandurang1 aIllathvalappil, Rajith1 aSingh, Chandrodai, Pratap1 aKanheerampockil, Fayis1 aWalko, Priyanka, S.1 aBhat, Suresh, K.1 aDevi, Nandini1 aVinod, C., P.1 aKrishnamurty, Sailaja1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/active-site-engineering-and-theoretical-aspects-superhydrophilic-nanostructure-array02763nas a2200229 4500008004100000022001400041245017600055210006900231260000800300300001400308490000600322520188200328100003002210700002702240700002002267700002702287700002402314700002102338700001802359700002402377856013202401 2023 eng d a2398-490200aCobalt-manganese modified theophrastite phase of nickel hydroxide nanoflower arrays on nickel foam as a self-standing bifunctional electrode for overall water electrolysis0 aCobaltmanganese modified theophrastite phase of nickel hydroxide cMAY a2428-24400 v73 a

Designing and developing self-supported electrodes for water electrolysis is attractive as compared to conventional catalyst-coated electrodes. Herein, a (Co0.3Mn0.1Ni0.6)(OH)(2)/NF nanocomposite is prepared by anchoring (Co0.3Mn0.1Ni0.6)(OH)(2)via simple one-pot hydrothermal synthesis on nickel foam. The presence of Mn induces the external electronic structure of Co(OH)(2), and this also improves the electrochemically active surface area (ECSA). These favor better accessibility of active sites and increased intrinsic activity for the OER and HER. (Co0.3Mn0.1Ni0.6)(OH)(2)/NF has shown promising electrochemical activity toward the OER and HER in a 1 M KOH electrolyte, with an overpotential of 270 mV for the OER and 163 mV for the HER to deliver 10 mA cm(-2) current density. The overall water splitting was performed by employing (Co0.3Mn0.1Ni0.6)(OH)(2)/NF as both the cathode and anode by displaying a voltage of 1.62 V at 10 mA cm(-2), which is comparable to that extracted from a similar system based on the state-of-the-art Pt/C@NF cathode and RuO2@NF anode (1.60 V at 10 mA cm(-2)) standard electrode pair. Interestingly, at high current densities, the (Co0.3Mn0.1Ni0.6)(OH)(2)/NF//(Co0.3Mn0.1Ni0.6)(OH)(2)/NF system displayed better overall water splitting performance (1.78 V at 100 mA cm(-2)) compared to its Pt/C@NF//RuO2@NF (1.89 V at 100 mA cm(-2)) counterpart while displaying a stable output during the evolution period that lasted for 24 h. The amounts of H-2 and O-2 produced are estimated to be 701.2 and 358.6 mmol, respectively, at a time interval of 1 h; these amounts correspond to an similar to 1 : 2 ratio of O-2 and H-2, respectively. This study confirms the capability for employing (Co0.3Mn0.1Ni0.6)(OH)(2)/NF as a bi-functional and self-standing electrode for the realistic demonstrations of overall water splitting applications.

1 aKharabe, Geeta, Pandurang1 aIllathvalappil, Rajith1 aBarik, Sidharth1 aKanheerampockil, Fayis1 aWalko, Priyanka, S.1 aBhat, Suresh, K.1 aDevi, Nandini1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/cobalt-manganese-modified-theophrastite-phase-nickel-hydroxide-nanoflower-arrays-nickel-foam03376nas a2200337 4500008004100000022001400041245023000055210006900285260000800354490000700362520209900369653000702468653002602475653001402501653002702515653001802542653003002560653003002590653003402620653003402654100003002688700002002718700003302738700001802771700002702789700002002816700001802836700003602854700002402890856012402914 2024 eng d a1613-681000aAluminium, nitrogen-dual-doped reduced graphene oxide Co-existing with cobalt-encapsulated graphitic carbon nanotube as an activity modulated electrocatalyst for oxygen electrocatalyst for oxygen electrochemistry applications0 aAluminium nitrogendualdoped reduced graphene oxide Coexisting wi cAUG0 v203 a

There is a rising need to create high-performing, affordable electrocatalysts in the new field of oxygen electrochemistry. Here, a cost-effective, activity-modulated electrocatalyst with the capacity to trigger both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in an alkaline environment is presented. The catalyst (Al, Co/N-rGCNT) is made up of aluminium, nitrogen-dual-doped reduced graphene oxide sheets co-existing with cobalt-encapsulated carbon nanotube units. Based on X-ray Absorption Spectroscopy (XAS) studies, it is established that the superior reaction kinetics in Al, Co/N-rGCNT over their bulk counterparts can be attributed to their electronic regulation. The Al, Co/N-rGCNT performs as a versatile bifunctional electrocatalyst for zinc-air battery (ZAB), delivering an open circuit potential approximate to 1.35 V and peak power density of 106.3 mW cm-2, which are comparable to the system based on Pt/C. The Al, Co/N-rGCNT-based system showed a specific capacity of 737 mAh gZn-1 compared to 696 mAh gZn-1 delivered by the system based on Pt/C. The DFT calculations indicate that the adsorption of Co in the presence of Al doping in NGr improves the electronic properties favoring ORR. Thus, the Al, Co/N-rGCNT-based rechargeable ZAB (RZAB) emerges as a highly viable and affordable option for the development of RZAB for practical applications. This manuscript reports the development of a new bifunctional catalyst that exhibits high activity and stability under practical operating conditions. The catalyst (Al, Co/N-rGCNT) is made up of aluminium, nitrogen-dual-doped reduced graphene oxide sheets co-existing with the in situ formed cobalt-encapsulated CNT units is synthesized by a scalable pyrolysis method in an inert Ar atmosphere. The developed electrocatalyst achieved enhanced the oxygen reduction reaction (ORR) and the oxygen evolution reaction OER activity as a result of the favorable synergistic modulations and the system can serve as a process-friendly air-electrode for rechargeable zinc-air battery (RZAB). image

10aAl10aBifunctional catalyst10aDFT study10aencapsulated structure10aN-dual doping10aOxygen Evolution Reaction10aoxygen reduction reaction10arechargeable zinc-air battery10aX-ray absorption spectroscopy1 aKharabe, Geeta, Pandurang1 aBarik, Sidharth1 aVeeranmaril, Sudheesh, Kumar1 aNair, Aathira1 aIllathvalappil, Rajith1 aYoyakki, Athira1 aJoshi, Kavita1 aVinod, Chathakudath, Prabhakara1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/aluminium-nitrogen-dual-doped-reduced-graphene-oxide-co-existing-cobalt-encapsulated02936nas a2200301 4500008004100000022001400041245013700055210006900192260000800261490000700269520184900276653003702125653001802162653004202180653003002222653003002252653001702282100002002299700003002319700002902349700002502378700001802403700002002421700001802441700002602459700002402485856012502509 2024 eng d a1613-681000aBreaking the Pt electron symmetry and OH spillover towards ptir active center for performance modulation in direct ammonia fuel cell0 aBreaking the Pt electron symmetry and OH spillover towards ptir  cDEC0 v203 a

The growing interest in low-temperature direct ammonia fuel cells (DAFCs) arises from the utilization of a carbon-neutral ammonia source; however, DAFCs encounter significant electrode overpotentials due to the substantial energy barrier of the *NH2 to *NH dehydrogenation, compounded by the facile deactivation by *N on the Pt surface. In this work, a unique catalyst, Pt4Ir@AlOOH/NGr i.e., Pt4Ir/ANGr, is introduced composed of PtIr alloy nanoparticles controllably decorated on the pseudo-boehmite phase of AlOOH-supported nitrogen-doped reduced graphene (AlOOH/NGr) composite, synthesized via the polyol reduction method. The detailed studies on the structural and electronic properties of the catalyst by XAS and VB-XPS reveal the possible electronic modulations. The optimized Pt4Ir/ANGr composition exhibits a significantly improved onset potential and mass activity for AOR. The DFT study confirms the OHad species spillover by AlOOH and Pt4Ir (100) facilitates the conversion of the *NH2 to *NH with minimal energy barriers. Finally, testing of DAFC at the system level using a membrane electrode assembly (MEA) with Pt4Ir/ANGr as the anode catalyst, demonstrating the suitability of the catalyst for its practical applications. This study thus uncovers the potential of the Pt4Ir catalyst in synergy with ANGr, largely addressing the challenges in hydrogen transportation, storage, and safety within DAFCs. In this article, a versatile catalyst, Pt4Ir/ANGr, is introduced composed of PtIr alloy nanoparticles decorated on AlOOH/NGr composite. The AlOOH provides an -OH-rich surface conducive to the facile adsorption and decoration of the PtIr alloy nanoparticles and OHad species spillover from AlOOH to the Pt4Ir active center during AOR, further validating the higher experimental activity obtained in Pt4Ir/ANGr. image

10aammonia oxidation reaction (AOR)10ad-band center10adensity functional theory (DFT) study10adirect ammonia fuel cells10ahydroxyl spillover effect10aXAS analysis1 aBarik, Sidharth1 aKharabe, Geeta, Pandurang1 aSamal, Pragnya, Paramita1 aUrkude, Rajashri, R.1 aKumar, Sachin1 aYoyakki, Athira1 aVinod, C., P.1 aKrishnamurty, Sailaja1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/breaking-pt-electron-symmetry-and-oh-spillover-towards-ptir-active-center-performance02165nas a2200205 4500008004100000022001400041245012400055210006900179260000900248300001400257490000700271520139800278100002301676700003001699700002001729700001801749700002401767700003801791856013001829 2024 eng d a0887-062400aCo-incorporated N-doped micro-meso porous carbon as an electrocatalyst for oxygen reduction reaction and Zn-air battery0 aCoincorporated Ndoped micromeso porous carbon as an electrocatal cAPR  a7196-72070 v383 a

Metal-organic frameworks are considered ideal precursors for the preparation of transition-metal, heteroatom-doped carbon catalysts that are perceived to be efficient electrocatalysts for energy storage devices. Herein, we demonstrate the synthesis of ZIF-67-derived Co-incorporated N-doped porous carbon catalysts supported on high surface area microporous carbon prepared from a lotus seed shell. The combination of the two carbon catalysts in different weight ratios resulted in Co-incorporated N-doped carbon sheets with tuned surface area and porosity, enabling enhanced oxygen reduction reaction (ORR) activity in an alkaline medium. The optimized carbon catalyst ZL 600 (3:1) exhibited a half-wave potential of 0.79 V vs RHE and a limiting current density of -4.38 mA cm(-2) in 0.1 M KOH solution with higher stability and methanol tolerance. The optimized sample ZL 600 (3:1) demonstrated as a cathode in a zinc-air battery exhibited an open circuit voltage of 1.29 V with a flat discharge profile at a current rate of 10 mA cm(-2). The homemade system produced a specific capacity of 610 mAh g(-1) and a peak power density of 111 mW cm(-2), comparable to the cathode made with Pt/C. The high micro-mesoporosity, pyridinic and pyrrolic nitrogen contents, as well as enriched Co-active centers protected by carbon sheets favorably contributed to the efficient ORR mechanism.

1 aPriya, Vaishna, K.1 aKharabe, Geeta, Pandurang1 aBarik, Sidharth1 aMohamed, Peer1 aKurungot, Sreekumar1 aHareesh, Unnikrishnan, Nair Saras uhttps://library.ncl.res.in/content/co-incorporated-n-doped-micro-meso-porous-carbon-electrocatalyst-oxygen-reduction-reaction02443nas a2200313 4500008004100000022001400041245012100055210006900176260000800245490000600253520146100259653000801720653001701728653000801745653001501753653000801768653001501776100001801791700002001809700003001829700001701859700002201876700001401898700002201912700002101934700002101955700002401976856012902000 2025 eng d a2366-748600aBinder-free in situ interface reconstruction of NiMoO4 nanorods over Ni(OH)2 nanosheets for efficient urea oxidation0 aBinderfree in situ interface reconstruction of NiMoO4 nanorods o cDEC0 v93 a

Replacing the energy-intensive oxygen evolution reaction (OER) with the urea oxidation reaction (UOR) in electrochemical water splitting offers simultaneous green hydrogen production and urea-rich wastewater oxidation, enhancing energy efficiency and economic viability. In this study, a non-noble metal-based binder-free NiMoO4/Ni(OH)2/NF electrocatalyst is developed, featuring NiMoO4 nanorods anchored on Ni(OH)2 nanosheets. This unique morphology facilitates a highly active in situ reconstructed interface, delivering a current density of 134 mA cm-2 at 1.40 V (vs RHE) in 1 m KOH with 0.33 m urea, significantly outperforming its individual components. The catalyst demonstrates excellent stability over 50 h at 30 mA cm-2. When integrated into an anion exchange membrane urea electrolyser (13 cm2 area) with Pt@C/NF as the HER cathode, the system achieves 192 mA cm-2 at 1.60 V. The post-UOR studies confirm the presence of an amorphous NiMoO4-crystalline Ni(OH)2 interface, which plays a key role in enhancing the availability of the active sites to enhance the UOR performance. The improved electrochemical performance of the engineered catalyst can be ascribed to the in situ reconstructed amorphous-crystalline interface, optimal hydrophilicity, reduced charge transfer resistance, and the distinct morphology. This strategy offers a promising pathway for developing highly active electrocatalysts for energy conversion applications.

10aAEM10aelectrolyser10aOWS10atomography10aUOR10awastewater1 aKumar, Yogesh1 aBarik, Sidharth1 aKharabe, Geeta, Pandurang1 aTorris, Arun1 aSingh, Mayank, U.1 aMohan, S.1 aGalave, Chaitanya1 aTekawadia, Jyoti1 aKanawade, Rajesh1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/binder-free-situ-interface-reconstruction-nimoo4-nanorods-over-nioh2-nanosheets-efficient02473nas a2200277 4500008004100000022001400041245010900055210006900164260000800233490000700241520149100248653001801739653003001757653003301787653002501820653002101845653004501866653003401911100003001945700002001975700001701995700001602012700001802028700002402046856012502070 2025 eng d a1613-681000aDefect-rich CoFe-alloy with engineered carbon support for high-performance rechargeable Zn-air batteries0 aDefectrich CoFealloy with engineered carbon support for highperf cSEP0 v213 a

Defect-rich CoFe-alloy with engineered carbon support is synthesized as a bifunctional cathode, coupled with a modified electrode fabrication technique, for rechargeable zinc-air batteries (RZABs). The CoFe(2:1)/N-rGCNT-catalyst is synthesized by annealing graphene oxide (GO), cobalt and iron acetate, and melamine, leading to the in situ formation of CoFe alloy-encapsulated CNTs. This resulted in a unique layer-separated Fe-rich skin@CoFe alloy decorated nitrogen-doped graphene (NGr) with CoFe-encapsulated CNTs. The interplay of line defects, enhanced conductivity, and electronic modulation underpins electrocatalyst's performance. Electrochemical analysis revealed an onset potential of 955 mV vs RHE, a half-wave potential of 835 mV vs RHE for oxygen reduction reaction (ORR) and an overpotential of 340 mV for oxygen evolution reaction (OER), yielding a Delta E of 0.73 V, comparable to the reported catalysts. The 3D X-ray microtomography simulations suggest improved air permeability of CoFe(2:1)/N-rGCNT facilitates easier gas diffusion, contributing in better device performance. The RZAB with CoFe(2:1)/N-rGCNT-cathode exhibited a peak power density of 171.3 mW cm(-)2, surpassing 140.8 mW cm(-)2 obtained from a cell based on Pt/C-cathode. The Co/N-rGCNT-based battery achieved a stable discharge profile at 10 mA cm(-)2 with a specific capacity of 650 mAh g(-)(1)Zn, and in rechargeable mode, achieved 140 h of high-rate charge-discharge cycling capability.

10a3D tomography10aN-doping10aalloy encapsulated structure10adevice demonstration10agrain boundaries10aoxygen reduction and evolution reactions10arechargeable zinc-air battery1 aKharabe, Geeta, Pandurang1 aBarik, Sidharth1 aTorris, Arun1 aMaria, Anit1 aKumar, Yogesh1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/defect-rich-cofe-alloy-engineered-carbon-support-high-performance-rechargeable-zn-air02891nas a2200313 4500008004100000022001400041245016200055210006900217260000800286300001400294490000700308520176200315653003302077653002402110653001402134653002502148653001302173653004502186653003402231100003002265700001802295700002002313700002502333700002002358700001802378700002602396700002402422856013102446 2025 eng d a1944-824400aHydrogel electrolyte-mediated in situ Zn-anode modification and the Ru-RuO2/NGr-coated cathode for high-performance solid-state rechargeable Zn-air batteries0 aHydrogel electrolytemediated in situ Znanode modification and th cJAN a3188-32040 v173 a

This work aims to deal with the challenges associated with designing complementary bifunctional electrocatalysts and a separator/membrane that enables rechargeable zinc-air batteries (RZABs) with nearly solid-state operability. This solid-state RZAB was accomplished by integrating a bifunctional electrocatalyst based on Ru-RuO2 interface nanoparticles supported on nitrogen-doped (N-doped) graphene (Ru-RuO2/NGr) and a dual-doped poly(acrylic acid) hydrogel (d-PAA) electrolyte soaked in KOH with sodium stannate additive. The catalyst shows enhanced activity and stability toward the two oxygen reactions, i.e., oxygen reduction and evolution reactions (ORR and OER), with a very low potential difference (Delta E) of 0.64 V. The computational insights bring out the electronic factors contributing to the enhanced catalytic activity of Ru-RuO2/NGr based on the charge density difference (CDD) between the interfaces. The disadvantages of the existing solid-state RZABs, such as their limited lifespan brought on by passivation, dendritic growth, corrosion, and shape change, have also been taken into account. The introduction of the stannate additive to the electrolyte induced an in situ Zn-anode modification, which subsequently improved the interfacial stability of the ZABs and, hence, the battery life cycles. The experimental observations reveal that, during the charging process, the Sn nanoparticles enable the homogeneous Zn deposition on the surface of the anode. Thus, the in situ Zn-anode surface modification assisted in achieving a high-rate cycle capability, viz., the homemade catalyst-based system exhibited continuous charge-discharge cycles for 20 h at a current density of 2.0 mA cm-2, with each cycle lasting for 5 min.

10aBifunctional Electrocatalyst10aCore-ShellStructure10aDFT study10aelectrolyte additive10aHydrogel10asolid-state rechargeable zinc-airbattery10aX-ray absorption spectroscopy1 aKharabe, Geeta, Pandurang1 aVerma, Tushar1 aBarik, Sidharth1 aUrkude, Rajashri, R.1 aAyasha, Nadeema1 aGhosh, Biplab1 aKrishnamurty, Sailaja1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/hydrogel-electrolyte-mediated-situ-zn-anode-modification-and-ru-ruo2ngr-coated-cathode-high02408nas a2200277 4500008004100000022001400041245016800055210006900223260000800292490000600300520146300306653000801769653001801777653001701795653000801812653000801820100001801828700002001846700002401866700003001890700002301920700002101943700001701964700002401981856012502005 2025 eng d a2366-748600aSelf-supported super-hydrophilic interconnected nanospikes and particles of MoS2-Ni3S2/NF with optimum d-band center for anion exchange membrane water electrolyzer0 aSelfsupported superhydrophilic interconnected nanospikes and par cMAR0 v93 a

There is an imperative need for highly efficient electrocatalysts for cost-effective hydrogen production. Herein, a self-supported, hybrid composite as a bifunctional electrocatalyst is introduced. This is achieved by in situ growth of MoS2-Ni3S2 on nickel foam (NF), designated as MoS2-Ni3S2/NF, synthesized by a facile one-step hydrothermal synthesis method. MoS2-Ni3S2/NF exhibits low overpotentials of only 187 and 146 mV for OER and HER, respectively, to achieve a current density of 10 mA cm-2 in 1 M KOH. The practical application of the designed bifunctional electrocatalyst is verified by constructing the MoS2-Ni3S2/NF || MoS2-Ni3S2/NF symmetrical membrane electrode assembly (MEA) of 4 cm2 working area for the anion exchange membrane water electrolyzer. The system shows continuous electrolysis for the monitored 48 h duration. For OER, an optimum d-band center of -1.66 eV for the heterostructure is calculated from the Density Functional Theory (DFT) studies. The factors like the unique structure of the electrocatalyst, enhanced hydrophilicity, improved electrochemically accessible number of sites (ECASs), and optimum d-band center, are expected to be the primary contributors to the system's improved performance. Thus, the present finding unveils a straightforward synthesis approach for creating a stable electrocatalyst for advancing commercial water electrolysis in the realm of renewable electrochemical energy conversion.

10aAEM10ad-band center10aelectrolyzer10aHER10aOER1 aKumar, Yogesh1 aBarik, Sidharth1 aSamudre, Nikhil, S.1 aKharabe, Geeta, Pandurang1 aChauhan, Inderjeet1 aManna, Narugopal1 aBhat, Suresh1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/self-supported-super-hydrophilic-interconnected-nanospikes-and-particles-mos2-ni3s2nf