02410nas a2200145   4500008004100000245011500041210006900156260000800225300001400233490000700247520185500254100002202109700000502131856012802136       2020                        eng d00aRational synthesis of 10GDC electrolyte through a microwave irradiation GNP facile route for SOFC applications0 aRational synthesis of 10GDC electrolyte through a microwave irra  cJAN  a3020-30280 v103 a<p>The gadolinium-doped ceria Gd0.1Ce0.9O1.95 (10GDC) powder was synthesized using a microwave-synthesized glycine nitrate process (MS-GNP). The powder was subsequently pressed into circular pellets and sintered at various temperatures viz. 800, 900, 1000 and 1200 degrees C, in a microwave, high temperature furnace for 4 h so as to investigate the effect of the sintering temperature and sintering environment on the structural, morphological, thermal and electrical properties. The crystallite size and particle size as observed from X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) are found to be in the range of 15-28 nm and 12-20 nm, respectively. The electrochemical impedance spectroscopy (EIS) analysis was carried out to study the electrochemical properties during the cooling cycle from 400 degrees C to 800 degrees C. The highest value of ionic conductivity (3.55 x 10(-1) S cm(-1)) is observed at an operating temperature of 800 degrees C and O-2 gas partial pressure of 1 atm. Further, it is observed that the sintering temperature has a significant effect on the surface morphology and crystallite size, thereby improving the electrical performance of the samples. Though 20GDC was used as an electrolyte in the authors' previous study, the novelty of the present work is the synthesis of 10GDC using a microwave-assisted glycine nitrate process and the size (thickness) of the prepared electrolyte for use in a Solid Oxide Fuel Cell (SOFC), which plays a major role in enhancing the structural, morphological and electrochemical properties with respect to different sintering temperatures as compared to the reported data. Hence, the prepared 10GDC electrolyte may be treated as one of the promising candidates as an electrolyte for SOFC for intermediate as well as high temperature applications.</p>
1 aShaikh, S., P. S.1 a  uhttps://library.ncl.res.in/content/rational-synthesis-10gdc-electrolyte-through-microwave-irradiation-gnp-facile-route-sofc