02781nas a2200229   4500008004100000022001400041245012800055210006900183260000800252300001600260490000700276520196500283100003002248700002102278700002002299700002302319700001802342700001802360700001802378700002402396856013102420       2022                        eng d  a2050-748800aPseudo-boehmite AlOOH supported NGr composite-based air electrode for mechanically rechargeable Zn-air battery applications0 aPseudoboehmite AlOOH supported NGr compositebased air electrode   cMAY  a10014-100250 v103 a<p>
	Both mechanically and electrically rechargeable zinc-air batteries (ZABs) have received much interest due to their high energy density and suitability for mobile and stationary applications. However, their commercialization has been impeded by the lack of robust, low-cost and environmentally benign catalyst materials that can be easily scaled up. In this context, the present work introduces a new type of transition metal-free catalytic material (AlOOH/NGr) by anchoring the pseudo-boehmite phase of aluminium oxyhydroxide (AlOOH) nanosheets over nitrogen-doped graphene (NGr) via a single-step and straightforward hydrothermal process. Furthermore, density functional theory (DFT) based computation demonstrates that the nucleation of AlOOH starts from the N-sites and points towards the strong surface interaction between AlOOH and NGr via doped nitrogen. AlOOH/NGr consisting of thin layered pseudo-boehmite sheets uniformly distributed over NGr has displayed an oxygen reduction reaction onset potential of 0.83 V and a half-wave potential of 0.72 V, along with good catalytic durability in alkaline medium. With this, AlOOH/NGr, when used as an air electrode for fabricating a primary Zn-air battery, the system has exhibited an open circuit voltage of similar to 1.27 V with a flat discharge profile at a current rate of 10 mA cm(-2). The fabricated system delivered a specific capacity of similar to 720 mA h g(-1) and a high power density of 204 mW cm(-2) and is comparable to the counterpart system based on the state-of-the-art Pt/C (20 wt% Pt) cathode. Additionally, the homemade battery was able to maintain its performance after 4 times of mechanical recharging of the battery, which lasted for more than 35 h at a discharge current density of 10 mA cm(-2). Thus, we have uncovered the potential of an earth-abundant metal-based catalytic system for fabricating and demonstrating a robust mechanically rechargeable zinc-air battery.</p>
1 aKharabe, Geeta, Pandurang1 aManna, Narugopal1 aNadeema, Ayasha1 aSingh, Santosh, K.1 aMehta, Shweta1 aNair, Aathira1 aJoshi, Kavita1 aKurungot, Sreekumar  uhttps://library.ncl.res.in/content/pseudo-boehmite-alooh-supported-ngr-composite-based-air-electrode-mechanically-rechargeable02989nas a2200277   4500008004100000022001400041245016400055210006900219260000800288300001100296490000800307520198800315653002502303653002102328653002202349653001902371100002302390700002802413700002902441700002102470700001802491700001802509700002602527700003002553856012802583       2026                        eng d  a1385-894700aPotential tuneable glucose oxidation to selective C6 molecules and CC cleavage, and parallel green H2 production: sustainable high current density electrolysis0 aPotential tuneable glucose oxidation to selective C6 molecules a  cFEB  a1726330 v5293 a<p>
	Current study elucidates the electrocatalytic efficacy of palladium-nanocubes (Pd-NCs) for the selective oxidation of glucose to value-added chemicals with concomitant hydrogen evolution. The Pd-NC catalyst demonstrated exceptional activity and product selectivity, achieving nearly quantitative glucose conversion (&gt;99 %) with high gluconic and glucaric acid yield at low anodic overpotential (0.6 V vs. RHE) in alkaline electrolyte. At not-so-high elevated potentials (1.2 V vs. RHE), oxidative CC scission prevails, yielding shorter-chain carboxylates along with C6-acids. Reaction products are thoroughly characterized and quantitatively estimated by NMR spectral methods; NMR methods also provide CC cleavage and mechanistic pathways of glucose to various products. Complementary DFT calculations delineate the thermodynamic favorability of glucose adsorption on Pd-NC surfaces (-1.83 eV) and the exergonic oxidation pathway under applied bias, corroborating experimental product distributions. In a two-electrode electrolyzer, Pd-NC anode paired with Pt/C and Ni2P cathode demonstrates 100 mA/cm(2) at 0.99 V and 1.37 V, respectively, with 48 % reduction in energy input (26.6 kWh/kg H-2) compared to conventional alkaline electrolysis; critically, H-2 production energy is lower than the usable energy (33.3 kWh/kg H-2). Sustainable chronopotentiometric assays confirm sustainability (similar to 140 h) in alkaline as well as saline electrolytes, underscoring the system's resilience against chloride-mediated corrosion. Present work establishes a proof of concept for integrated biomass-component valorization and carbon-negative green hydrogen production, merging atomic-level mechanistic insights with scalable reactor design. Optimization of reaction parameters, including potential tuning, reaction temperature and electrolyte engineering, offers a compelling strategy to further enhance C6 and fragmented product selectivity and overall system efficiency.</p>
10abiomass valorization10aelectrocatalysis10aenergy conversion10aSustainability1 aChauhan, Inderjeet1 aPatra, Kshirodra, Kumar1 aVijay, Pothoppurathu, M.1 aNalajala, Naresh1 aMehta, Shweta1 aJoshi, Kavita1 aRavindranathan, Sapna1 aGopinath, Chinnakonda, S.  uhttps://library.ncl.res.in/content/potential-tuneable-glucose-oxidation-selective-c6-molecules-and-cc-cleavage-and-parallel