02581nas a2200265 4500008004100000022001400041245010200055210006900157260000800226300001600234490000700250520165100257653003101908653002401939653003001963653001901993653003002012653001902042100001802061700002402079700003902103700001902142700002702161856012702188 2018 eng d a1944-824400aFused fluorenylindolenine-donor-based unsymmetrical squaraine dyes for dye-sensitized solar cells0 aFused fluorenylindoleninedonorbased unsymmetrical squaraine dyes cAUG a26335-263470 v103 a

A series of four unsymmetrical squaraine dyes, XSQ1-4, were synthesized using a fused fluorenylindolenine-based donor unit for dye-sensitized solar cells (DSSCs). The fused structure of fluorenylindolenine helped in moving the absorption toward the near-infrared (NIR) region, and the two sp(3)-C centers available on this donor were utilized to incorporate out-of-plane alkyl chains in opposite directions to control the dye-dye interactions on the TiO2 surface. High extinction coefficient (epsilon >= 10(5) M-1 cm(-1)) for absorbing NIR photons and suitable highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels with respect to the conduction band of TiO2 and electrolyte for charge injection and dye regeneration processes, respectively, make these dyes potential sensitizers for DSSCs. Introduction of branched alkyl groups in the pi-framework helped in controlling dye aggregation to reduce exciton quenching and assisted in TiO2 surface passivation to avoid the charge recombination process. Furthermore, having a naphthyl group on the indole part of the anchoring group containing segment helped to red-shift the absorption spectrum of dyes 15 nm toward the NIR region (XSQ3-4). Among all of the dyes under investigation, XSQ2 gave the best photovoltaic performance, having a short-circuit current density (J(SC)) of 13.99 mA cm(-2), open -circuit voltage (V-OC) of 0.66 V, and a fill factor (ff) of 0.71, with a device performance (eta) of 6.57%. Electrochemical impedance spectroscopy revealed higher electron lifetime on TiO2 for XSQ2, which helps to avoid the charge recombination process.

10aDye-sensitized solar cells10afluorenylindolenine10aH- and J-type aggregation10aNIR absorption10aout-of-plane alkyl groups10asquaraine dyes1 aBisht, Rajesh1 aSudhakar, Vediappan1 aKavungathodi, Munavvar, Fairoos Me1 aKarjule, Neeta1 aNithyanandhan, Jayaraj uhttps://library.ncl.res.in/content/fused-fluorenylindolenine-donor-based-unsymmetrical-squaraine-dyes-dye-sensitized-solar02335nas a2200241 4500008004100000022001400041245011500055210006900170260000800239300001400247490000600261520145000267653002301717653002001740653003101760653003201791653002601823100002801849700003901877700002701916700002701943856012301970 2019 eng d a2574-096200api-Extended cis-configured unsynimetrical squaraine dyes for dye-sensitized solar cells: panchromatic response0 apiExtended cisconfigured unsynimetrical squaraine dyes for dyese cDEC a8464-84720 v23 a

{Light absorbing sensitizer is the heart of the third generation photovoltaic technologies such as dye sensitized solar cells. Despite possessing large extinction coefficients for the metal-free organic dyes, the light harvesting efficiency is limited with the narrow absorption 20 profile in either visible or NIR regions of the solar spectrum. Though monolayer formation of organic sensitizers on semiconducting metal oxide surface leads to dye-dye interaction that leads to broadening the absorption profile, the contribution of the aggregated state to the power conversion process is found out to be poor. Here, we have engineered far-red active pi-extended cis-configured unsymmetrical squaraine dyes with carboxylic acid and cycnoacetic acid as anchoring groups with controlled aggregation and panchromatic light absorption by including the steric and electronic factors. The presence of sp(3)-C (out-of-plane) and N-alkyl (in-plane) groups played an important role in modulating the assembly of the dyes on the TiO2 electrode; the cis-squaraine unit helps to extend the conjugation in the NIR region besides enhancing the visible transition and the incident photon-to-current conversion efficiency profile that showed the importance of anchoring groups for the panchromatic response. Dye PSQ10 showed solar-to electric conversion with an onset of 850 nm with the device performance of 7.0% (V-oc = 0.581 V, J(sc) = 17.06 mA/cm(2)

10acis-squaraine dyes10aDye aggregation10aDye-sensitized solar cells10aextended far-red absorption10apanchromatic response1 aPunitharasu, Vellimalai1 aKavungathodi, Munavvar, Fairoos Me1 aSingh, Ambarish, Kumar1 aNithyanandhan, Jayaraj uhttps://library.ncl.res.in/content/pi-extended-cis-configured-unsynimetrical-squaraine-dyes-dye-sensitized-solar-cells03102nas a2200229 4500008004100000022001400041245017500055210006900230260000800299300001400307490000700321520219200328653002302520653002102543653002502564653003102589653002902620100002702649700003902676700002702715856013002742 2020 eng d a1944-824400aAlkyl-group-wrapped unsymmetrical squaraine dyes for dye-sensitized solar cells: branched alkyl chains modulate the aggregation of dyes and charge recombination processes0 aAlkylgroupwrapped unsymmetrical squaraine dyes for dyesensitized cJAN a2555-25650 v123 a

Electron transfer processes at the interfaces dictate the factors that improve the photovoltaic parameters, such as open-circuit voltage (V-oc) and short-circuit current (J(sc)), of a dye-sensitized solar cell device, besides selection of a set of suitable anode, dye, electrolyte, and cathode materials. An inefficient charge injection process at the dye-TiO2 interface and charge recombination at the TiO2-dye/electrolyte interface have detrimental effects on improving both J(sc) and V-oc. Hence, tailoring the factors that govern the improvement of J(sc) and V-oc will be an ideal approach to get the desired sensitizers with good device efficiencies. Squaraines are far-red-active zwitterionic dyes and have a high molar extinction coefficient along with unique aggregation properties due to the large dipole moment associated with them. Here, we report a series of unsymmetrical squaraine dyes, SQS1 to SQS6, with systematic variation of alkyl groups at the sp(3)-C and N-atoms of the indoline unit that is away from the anchoring group to control the dye-dye interactions on the TiO2 surface. The branched alkyl groups help in modulating the self-assembly of sensitizers on the TiO2 surface, besides passivating the surface that helps avoid the charge recombination processes. Light harvesting efficiency and cyclic voltammetry studies of dye-sensitized TiO2 electrodes indicate that the aggregation and charge hopping process between the dye molecules can be modulated, respectively, by systematically increasing the number of carbon atoms in the alkyl groups. Such a variation in the branched alkyl group helps enhance V-oc from 672 (SQS1) to 718 mV (SQS6) and J(sc) from 7.95 (SQS1) to 12.22 mA/cm(2) (SQS6), with the device efficiency ranging from 3.82% to 6.23% without any coadsorbent. Dye SQS4 achieves the highest efficiency of 7.1% (V-oc = 715 mV, J(sc) = 13.05 mA/cm(2)) with coadsorbent chenodeoxycholic acid (CDCA) using an iodine (I-/I-3(-)) electrolyte compared to its analogues. An analysis of the incident photon-to-current efficiency profiles indicates that the major contribution to photocurrent generation is from the aggregated squaraine dyes on TiO2.

10aaggregation of dye10acharge injection10acharge recombination10aDye-sensitized solar cells10aunsymmetrical squaraines1 aSingh, Ambarish, Kumar1 aKavungathodi, Munavvar, Fairoos Me1 aNithyanandhan, Jayaraj uhttps://library.ncl.res.in/content/alkyl-group-wrapped-unsymmetrical-squaraine-dyes-dye-sensitized-solar-cells-branched-alkyl