02150nas a2200205   4500008004100000020002200041245013100063210006900194260023600263520118000499653001901679653000901698653001601707653001001723100002201733700002401755700001901779700001701798856012901815       2016                        eng d  a978-1-5090-2419-300aField emission investigation of composites of polypyrrole with graphene oxide, reduced graphene oxide and graphene nanoribbons0 aField emission investigation of composites of polypyrrole with g  a345 E 47th St, New York,NY 10017 USAbIEEE; IEEE Electron Devices Soc; ZEISS; Modern Electron; Amer Vacuum Soci; Paul Scherrer Inst; Elect & Comp Engn; Univ British Columbia, Peter Wall Inst Adv Studies; Dept Elect & Comp EngncJUL3 a<p>The monomer pyrrole has been polymerized by chemical route in the presence of graphene oxide (GO), reduced graphene oxide (rGO) and graphene nanoribbons (GNR) separately to prepare nanocomposites as Polypyrrole-GO (PGO), PPy-rGO (PRGO), PPy-GNR (PGNR), respectively. The morphological, chemical and structural characterization of the as-synthesized products was carried out using scanning electron microscopy (SEM), Raman and fourier transform infrared (FTIR) spectroscopy. Field emission (FE) studies of PGO, PRGO, PGNR emitters were performed at the base pressure of 1x10(-8) mbar in planar `diode' configuration. Onset and threshold field values corresponding to emission current densities of 1 and 100 mu A/cm(2) are observed to be 1.5 and 2.3V/mu m for PGO, 1.4 and 2.2 V/mu m for PRGO and lowest for PGNR as 0.9 and 1.2V/mu m, respectively. The maximum emission current density of 2.5 mA/cm(2) drawn for PGO at the applied electric field of 3.2V/mu m, 1.2 mA/cm(2) at 3.6V/mu m from the PRGO and 8 mA/cm(2) at the field of 2.2 V/mu m from the PGNR emitters. An emission current versus time (I-t) plot shows stable emission behavior for the preset current values.</p>10afield emission10aFTIR10apolypyrrole10aRaman1 aHarpale, Kashmira1 aBansode, Sanjeewani1 aMore, Mahendra1 aLate, D., J.  uhttps://library.ncl.res.in/content/field-emission-investigation-composites-polypyrrole-graphene-oxide-reduced-graphene-oxide01950nas a2200253   4500008004100000022001400041245010600055210006900161260000800230300002300238490000700261520108800268653001901356653001401375653002801389100002201417700001701439700002201456700001801478700002201496700001901518700002801537856013101565       2018                        eng d  a1022-976000aPhenazine-containing poly(phenylenevinylene): a new polymer with impressive field emission properties0 aPhenazinecontaining polyphenylenevinylene a new polymer with imp  cFEB  aArticle Number: 610 v253 a<p>Phenazine-containing poly(phenylenevinylene) (P(PHN-PV)) was synthesized using Wittig-Horner polycondensation of the appropriately designed monomers viz. 5,10-dioctyl-5,10-dihydrophenazine-2,7-dicarbaldehyde and tetraethyl ((2,5-bis((2-ethylhexyl) oxy)-1,4 phenylene) bis(methylene)) bis(phosphonate). The design embraces the specific motivation of incorporating the nitrogen-containing heterocycle viz. .phenazine in poly(phenylenevinylene) backbone. P(PHN-PV) exhibited reversible redox properties. In the field emission measurements performed on the film of P(F'HN-PV), the turn-on field was observed to be 1.93 V/mu m for the current density of 10 mu A/cm(2). The maximum current density of similar to 4.87 mA/cm(2) was achieved at the applied field of 3.84 V/mu m. The emission current showed impressive stability for 6 h at a constant current of 1 mu A (current density of about 20 mu A/cm(2)). These results emphasize the role of phenazine heterocycle with lone pair of electrons on nitrogen in lowering the oxidation onset and in turn reduction of the turn-on voltage.</p>10afield emission10aPhenazine10aPoly(phenylenevinylene)1 aChhatre, Shraddha1 aIchake, Amol1 aHarpale, Kashmira1 aPatil, Sumati1 aDeshpande, Aparna1 aMore, Mahendra1 aWadgaonkar, Prakash, P.  uhttps://library.ncl.res.in/content/phenazine-containing-polyphenylenevinylene-new-polymer-impressive-field-emission-properties