02214nas a2200277 4500008004100000022001400041245010600055210006900161260007700230300001200307490000800319520117400327653004101501653004501542653002301587653002801610653001301638100001901651700002101670700002301691700002301714700001501737700002801752700002501780856013101805 2005 eng d a1022-135200aHydrophobically modified poly(acrylic acid) using 3-pentadecylcyclohexylamine: synthesis and rheology0 aHydrophobically modified polyacrylic acid using 3pentadecylcyclo aPO BOX 10 11 61, D-69451 WEINHEIM, GERMANYbWILEY-V C H VERLAG GMBHcFEB a464-4720 v2063 a

Hydrophobically modified poly(acrylic acid) was synthesized using 3-pentadecylcyclohexylamine (3-PDCA), which was in turn synthesized from 3-pentadecylphenol, one of the components of cashew-nut shell liquid (CNSL), a renewable resource material. H-1 NMR spectra confirmed the incorporation of 3-PDCA onto PAA and a series of HMPs with three different molar concentrations, viz. congruent to 3, 5 and 7 mol-% of 3-PDCA, were synthesized. An increase in viscosity with increasing hydrophobic content was observed by rheological measurements. The critical association concentrations were determined using an Ubbelohde viscometer and a controlled stress rheometer. The stability of HMPs towards temperature and shear was studied. Rheological measurements showed that there was a steady increase in viscosity with increase in hydrophobe content due to the formation of reversible networks. These polymers exhibited gel-like behavior at low concentrations (greater than or equal to2 wt.-%) with an apparent yield stress (ca. 10 Pa) and showed shear thinning properties (non-Newtonian). However, below a critical concentration, c [eta], they showed Newtonian behavior.

10a3-pentadecylcyclohexylamine (3-PDCA)10ahydrophobically modified polymers (HMPs)10apoly(acrylic acid)10areversible associations10aRheology1 aShedge, A., S.1 aLele, Ashish, K.1 aWadgaonkar, P., P.1 aHourdet, Dominique1 aPcrrin, P.1 aChassenieux, Christophe1 aBadiger, Manohar, V. uhttps://library.ncl.res.in/content/hydrophobically-modified-polyacrylic-acid-using-3-pentadecylcyclohexylamine-synthesis-and-102137nas a2200253 4500008004100000022001400041245006600055210006600121260009200187300001800279490000800297520129000305653001401595653002501609653001301634653001401647100001901661700002501680700001701705700001501722700002101737700002501758856010001783 2009 eng d a1042-015000aHigh energy electron irradiation effects on polystyrene films0 aHigh energy electron irradiation effects on polystyrene films a4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLANDbTAYLOR & FRANCIS LTDcSEP aPII 9144664970 v1643 a

The effect of an 8MeV electron-beam on the structural, optical and dielectric properties of polystyrene films has been investigated respectively by means of Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-VIS) spectroscopy and electrical impedance (LCR) analysis over a radiation dose in the range of 50-250kGy using a Microtron accelerator. The FTIR spectral analysis shows no change in the overall structure of the irradiated polystyrene films, except a minor change in the intensity of a few peaks in the FTIR spectrum, indicating that polystyrene is resistant to electron-beam irradiation over the range of radiation doses investigated. The optical band gap analysis using the UV-VIS absorption spectra of the polystyrene shows a small decrease in the optical band gap (Eg) and the activation energy with an increase in electron doses. Further, the dielectric measurements over a frequency range of 100Hz to 1MHz for the electron-beam-irradiated polystyrene films show that both the dielectric constant and the dielectric loss increase with an increase in electron radiation dose, which may be ascribed to the formation of defect sites in the band gap of polystyrene as a consequence of molecular chain scission in the polymer films upon irradiation.

10aelectrons10aoptical spectroscopy10aPolymers10aradiation1 aMathad, R., D.1 aKumar, H., G. Harish1 aSannakki, B.1 aGanesh, S.1 aSarma, K., S. S.1 aBadiger, Manohar, V. uhttps://library.ncl.res.in/content/high-energy-electron-irradiation-effects-polystyrene-films-002613nas a2200229 4500008004100000022001400041245011300055210006900168260006800237300001400305490000700319520173200326653001602058653004902074653001302123653002702136100002202163700002802185700002102213700002502234856012402259 2010 eng d a0887-626600aHydrophobically modified poly(vinyl alcohol) using alkoxy-substituted methyl gallate: synthesis and rheology0 aHydrophobically modified polyvinyl alcohol using alkoxysubstitut a111 RIVER ST, HOBOKEN, NJ 07030 USAbJOHN WILEY & SONS INCcMAY a1054-10630 v483 a

Hydrophobically modified poly(vinyl alcohol) (HMPVA) polymers were synthesized by potassium t-butoxide-catalyzed reaction of PVA with methyl 3,4,5-tris(n-octyloxy) benzoate (MGC(8))/3,4,5-tris(n-dodecyloxy) benzoate (MGC(12)) and 1,3-propane sultone. The concentration of 1,3-propane sultone was kept constant at 10 mol %. and that of MGC(8) (2, 3, and 4 mol %)/MGC(12) (2 and 3 mol %) was varied to obtain HMPVAs with different hydrophobic contents. The incorporation of MGC(8)/MGC(12) and 1,3-propane sultone onto HMPVA was confirmed by NMR spectroscopy. Rheological properties of aqueous solutions also confirmed the presence of hydrophobic and charged functional groups on HMPVAs. In the semidilute regime, the specific viscosity of HMPVAs followed concentration scaling that is typical of polyelectrolytes. At higher concentrations, the HMPVA solutions with 3 and 4 mol % of MGC(8) exhibited large increase in specific viscosity. Oscillatory experiments on these solutions exhibited gel-like behavior at polymer concentrations of 40-50 g/L. Confocal microscopy images of HMPVA with 4 mol % of MGC(8) clearly indicated the existence of microgels. The tendency of formation of microgels further increased with increasing chain length of the hydrophobe, that is, with MGC(12). These samples exhibited rheological behavior that is typical of soft solids and was therefore probed by the strain-rate frequency superposition technique reported recently in the literature. HMPVAs with improved rheological properties show potential applications as thickeners in cosmetic creams, lotions and as drug carriers in pharmaceutical formulations. (C) 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1054-1063, 2010

10agallic acid10ahydrophobically modified poly(vinyl alcohol)10aRheology10awater-soluble polymers1 aShedge, Aarti, S.1 aWadgaonkar, Prakash, P.1 aLele, Ashish, K.1 aBadiger, Manohar, V. uhttps://library.ncl.res.in/content/hydrophobically-modified-polyvinyl-alcohol-using-alkoxy-substituted-methyl-gallate-001011nas a2200133 4500008004100000245003800041210003800079300001100117490000700128520062200135100002200757700002500779856007300804 2014 eng d00aHydrophobically Modified Chitosan0 aHydrophobically Modified Chitosan a91-1020 v193 a

Hydrophobically modified chitosan was prepared using the hydrophobic compound derived from natural resource material such as cashew nut shell liquid. Chitosan was modified using 3-pentadecyl cyclohexane carbaldehyde to different extents (2, 3, and 5 mol%). Solution properties of hydrophobically modified chitosan were studied by rheology and light scattering. These indicated the aggregation behavior above the critical association concentration. Further, it was concluded that above the critical association concentration, the dynamics of the network formed due to the associations slowed down significantly.

1 aShedge, Aarti, S.1 aBadiger, Manohar, V. uhttps://library.ncl.res.in/content/hydrophobically-modified-chitosan01743nas a2200277 4500008004100000022001400041245014200055210006900197260007100266300001400337490000600351520069700357653002201054653002301076653003101099653001401130653002401144653001901168100002501187700002401212700002101236700002701257700002501284700002401309856013201333 2016 eng d a1944-824400aHigh-Performance flexible solid-state supercapacitor with an extended nanoregime interface through in situ polymer electrolyte generation0 aHighPerformance flexible solidstate supercapacitor with an exten a1155 16TH ST, NW, WASHINGTON, DC 20036 USAbAMER CHEMICAL SOCcJAN a1233-12410 v83 a

{Here, we report an efficient strategy by which a significantly enhanced electrodeelectrolyte interface in an electrode for supercapacitor application could be accomplished by allowing in situ polymer gel electrolyte generation inside the nanopores of the electrodes. This unique and highly efficient strategy could be conceived by judiciously maintaining ultraviolet-triggered polymerization of a monomer mixture in the presence of a high-surface-area porous carbon. The method is very simple and scalable, and a prototype, flexible solid-state supercapacitor could even be demonstrated in an encapsulation-free condition by using the commercial-grade electrodes (thickness = 150 mu m

10acyclic voltametry10aimpedance analysis10ain situ polymer generation10ainterface10apolymer electrolyte10asupercapacitor1 aAnothumakkool, Bihag1 aTorris, Arun, A. T.1 aVeeliyath, Sajna1 aVijayakumar, Vidyanand1 aBadiger, Manohar, V.1 aKurungot, Sreekumar uhttps://library.ncl.res.in/content/high-performance-flexible-solid-state-supercapacitor-extended-nanoregime-interface-through-002205nas a2200253 4500008004100000022001400041245009700055210006900152260000800221490000800229520133700237653002901574653003401603653000901637653001401646653002101660100002801681700002701709700001701736700002201753700002401775700002501799856012701824 2026 eng d a0021-899500aHigh-performance sultone-modified PVA/PAMPS semi-IPN hydrogels for proton exchange membranes0 aHighperformance sultonemodified PVAPAMPS semiIPN hydrogels for p cAPR0 v1433 a

Hydrogel membranes composed of poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) and sultone-modified poly(vinyl alcohol) (PVA) were successfully synthesized and evaluated as promising proton-conducting materials. A key advantage involves the premodification of PVA with 1,3-propane sultone to introduce sulfonic acid groups, thereby imparting proton conductivity to the PVA backbone. This sultone-modified PVA was then physically entangled within a PAMPS cross-linked network to form novel semi-interpenetrating network (semi-IPN) hydrogels. This synergistic design leverages the excellent film-forming and mechanical properties of PVA with the high proton conductivity inherent to PAMPS. The synthesized membranes exhibited robust mechanical properties, with tensile strengths ranging from 5 to 30 MPa and percentage elongations between 200% and 400%, depending on their humidity content. These hydrogel membranes demonstrated proton conductivities ranging from 0.6 to 4.3 x 10-2 S cm-1. The activation energy for proton conduction was found to be as low as 3.5 kJ mol-1, significantly lower than that of the commercial benchmark membrane, Nafion 117 (12 kJ mol-1). These findings underscore the potential of these novel PAMPS/sultone-modified PVA semi-IPN hydrogel membranes for advanced fuel cell applications.

10abatteries and fuel cells10afunctionalization of polymers10aGels10amembranes10apolyelectrolytes1 aPatwadkar, Manjusha, V.1 aIllathvalappil, Rajith1 aTorris, Arun1 aFrancis, Sifa, C.1 aKurungot, Sreekumar1 aBadiger, Manohar, V. uhttps://library.ncl.res.in/content/high-performance-sultone-modified-pvapamps-semi-ipn-hydrogels-proton-exchange-membranes