02003nas a2200241   4500008004100000022001400041245007700055210006900132260006800201300001400269490000800283520114800291653001801439653002301457653003101480653002501511653002001536100002701556700002301583700002201606700002201628856011101650       2006                        eng d  a0021-899500aSurface modification of polyacrylonitrile based ultrafiltration membrane0 aSurface modification of polyacrylonitrile based ultrafiltration   a111 RIVER ST, HOBOKEN, NJ 07030 USAbJOHN WILEY & SONS INCcSEP  a4378-43850 v1013 a<p>Ultrafiltration membrane based on polyacrylonitrile prepared by phase inversion method using zinc chloride as an additive showed more than 90% rejection for BSA and 90-110 Im(-2) h(-1) water flux. The surface modification of this membrane was studied using ethanolamine, triethylamine, sodium hydroxide, and potassium hydroxide solutions. The effect of base treatment time and temperature on water flux and rejection was investigated. The membranes exhibited swelling by NaOH treatment followed by deswelling by HCl post-treatment, similar to pH responsive membranes. The treatment by organic as well as inorganic bases improved water flux with a slight lowering in BSA rejection by dead-end mode type treatment. A 230% increase in water flux was achieved by sodium hydroxide treatment in crossflow mode without a noticeable pore swelling by SEM. The contact angle of the modified membranes was decreased as compared to the unmodified one indicating appreciable surface modification. As the treatment time or temperature increased, the ESCA analysis showed increased population of Na-carboxylate groups. (c) 2006 Wiley Periodicals, Inc.</p>10aBSA rejection10achemical treatment10apolyacrylonitrile membrane10asurface modification10aUltrafiltration1 aLohokare, Harshada, R.1 aKumbharkar, S., C.1 aBhole, Yogesh, S.1 aKharul, Ulhas, K.  uhttps://library.ncl.res.in/content/surface-modification-polyacrylonitrile-based-ultrafiltration-membrane-0