01572nas a2200253   4500008004100000022001400041245010500055210006900160260007900229300001400308490000700322520060600329653003700935653003000972653002601002653002101028100002601049700002201075700002401097700001801121700002201139700002501161856013201186       2010                        eng d  a1388-248100aDirect transfer of micro-molded electrodes for enhanced mass transport and water management in PEMFC0 aDirect transfer of micromolded electrodes for enhanced mass tran  a360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USAbELSEVIER SCIENCE INCcNOV  a1638-16410 v123 a<p>Soft lithography technique is used to micropattern the electrodes on the electrolyte membrane of polymer electrolyte fuel cell (PEMFC) in order to alleviate the issues due to poor water management and inadequate reactant distribution in the fuel cell environment. Membrane electrode assembly with the micropatterned electrode has shown an increase in power density at a higher temperature as well as at a higher relative humidity when compared to a flat electrode. Consistency in cell performance is observed in the case of micropatterned electrodes. (C) 2010 Elsevier B.V. All rights reserved.</p>10aBipolar plate-less PEM fuel cell10aMicropatterned electrodes10aMicrotransfer molding10aSoft lithography1 aDeshmukh, Ashvini, B.1 aKale, Vinayak, S.1 aDhavale, Vishal, M.1 aSreekumar, K.1 aVijayamohanan, K.1 aShelke, Manjusha, V.  uhttps://library.ncl.res.in/content/direct-transfer-micro-molded-electrodes-enhanced-mass-transport-and-water-management-pemfc-0