02350nas a2200193   4500008004100000022001400041245013500055210006900190260011000259300001600369490000600385520151900391100002101910700002701931700002701958700001801985700002202003856013102025       2014                        eng d  a2050-748800aNew approach of blending polymeric ionic liquid with polybenzimidazole (PBI) for enhancing physical and electrochemical properties0 aNew approach of blending polymeric ionic liquid with polybenzimi  aTHOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLANDbROYAL SOC CHEMISTRYcJUN  a14449-144580 v23 a<p>Although the use of ionic liquids (IL) in polymeric membranes is known to elevate the electrochemical performance for proton exchange membrane-based fuel cells (PEMFC), they suffer from drawbacks such as IL drain and lowering in mechanical properties that lead to deterioration in PEMFC performance. To mitigate these issues, we report, for the first time, the use of polymeric ionic liquid (PIL), namely, poly(diallyl dimethyl ammonium trifluoride methane sulphonate) (P[DADMA][TFMS]) to be blended with polybenzimidazole (PBI-I) as a membrane material for PEMFC. PBI-I and (P[DADMA][TFMS]) were chosen because they form miscible blends and are suitable for acid doping as a matrix, which can eventually be used as proton conductor. The structure, miscibility and inter-polymer interactions were studied by infrared (IR) spectroscopy and differential scanning calorimetry (DSC). The increase in proton conduction in comparison to the PBI membranes was observed due to the presence of ionic groups of PILs in blend membranes. With the increase in PIL content, the proton conductivity of the composite membranes gradually increased from 0.04 S cm(-1) for PBI to 0.07 S cm(-1) for the blend membrane at 150 degrees C. The MEAs were fabricated with PBI-I, PBI-PIL15, PBI-PIL25 and PBI-PIL35. Corresponding single cells were successfully tested at temperatures of 160 degrees C. The maximum power density and current density obtained were 515 mW cm(-2) and 1632 mA cm(-2), respectively, for PBI-PIL25-based MEA.</p>1 aRewar, Anita, S.1 aChaudhari, Harshal, D.1 aIllathvalappil, Rajith1 aSreekumar, K.1 aKharul, Ulhas, K.  uhttps://library.ncl.res.in/content/new-approach-blending-polymeric-ionic-liquid-polybenzimidazole-pbi-enhancing-physical-and-0