01760nas a2200217   4500008004100000022001400041245006500055210006500120260007500185300001200260490000700272520100800279653001601287653001501303653002701318653003601345100001801381700002101399700002601420856009601446       2015                        eng d  a1566-254300aStudies on melt processable biocomposites of polylactic acid0 aStudies on melt processable biocomposites of polylactic acid  a233 SPRING ST, NEW YORK, NY 10013 USAbSPRINGER/PLENUM PUBLISHERScSEP  a321-3330 v233 a<p>Melt processable microcrystalline cellulose (MCC)/poly(lactic acid) (PLA) composites were successfully prepared by twin-screw extrusion. Several characterization techniques were used to investigate the effect of MCC on rheological behavior, morphology, crystallization and melting behavior of the PLA and structure-property correlation of the MCC/PLA composites has been established. Rheological measurements showed that the addition of MCC has a dramatic influence on the low frequency relaxations of PLA chains and above 5 % of MCC, it forms percolated network structure. Differential scanning calorimeter analysis showed that MCC acted as nucleating agent enhancing crystallization below the percolation concentration. Properties of MCC/PLA composites have been compared with that of talc and CaCO3 filled composites. Talc is found to be more effective in crystallizing PLA than MCC and CaCO3. MCC/PLA composites are found be melt processable like that of talc and CaCO3 filled PLA composites.</p>10aBiopolymers10acomposites10aRheological properties10aStructure-property relationship1 aJoseph, Seena1 aDeenadayalan, E.1 aMahanwar, Prakash, A.  uhttps://library.ncl.res.in/content/studies-melt-processable-biocomposites-polylactic-acid-0