@article { ISI:000228868600016, title = {Rapid hydrothermal synthesis route for nanocrystalline SrZrO3 using reactive precursors}, journal = {Materials Science and Engineering B-Solid State Materials for Advanced Technology}, volume = {119}, number = {1}, year = {2005}, month = {MAY}, pages = {87-93}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Synthesis of nanocrystalline, orthorhombic (space group Pnma) SrZrO3 was achieved using appropriate molar proportions of nitrate salts of strontium and zirconium as precursors. Formation of SrZrO3 (SZ) was facilitated hydrothermally in time period as less as half-an-hour, in aqueous medium with alkaline pH as confirmed by XRD. Sample characterization was performed by FT-IR spectroscopy; powder XRD, SEM, TEM and DSC. The results have been explained by proposing a suitable reaction mechanism based on the step-wise analysis of the reaction intermediates using FT-IR as well as XRD. A double cation hydroxide composite formation is anticipated that under hydrothermal conditions results in the formation of SrZrO3. Morphology of the samples was determined with the help of SEM and TEM. The particle size distribution as seen from the TEM micrograph lies in the range of 15-25 nm. Heats of reaction for different decomposition steps were obtained by DSC. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Crystallization, diffraction, Electron microscopy, infrared spectroscopy}, issn = {0921-5107}, doi = {10.1016/j.mseb.2005.01.007}, author = {Athawale, Anjali A. and Chandwadkar, Asha J. and Karandikar, Prashant R. and Bapat, Malini S.} } @article { ISI:000232337800013, title = {R\&D spending patterns of global firms}, journal = {Research-Technology Management}, volume = {48}, number = {5}, year = {2005}, month = {SEP}, pages = {51-59}, publisher = {INDUSTRIAL RESEARCH INST INC}, type = {Article}, address = {1550 M ST., NW, WASHINGTON, DC 20005 USA}, abstract = {

R\&D spending by the top 320 companies in 2004 was US\$ 331 billion. The R\&D intensity of these globalfirms has decreased marginally, as there was a decrease in R\&D spending by pharmaceutical firms. R\&D spending as a percentage of sales is the highest in the biotechnology industry followed by pharmaceuticals and network communications. At the same time, more firms are seeking to acquire intellectual assets from external sources. Managing intellectual assets will require competence to integrate external and internal knowledge assets so that innovation efficiency can go up while idea-to-market time goes down and product pipelines get richer.

}, keywords = {distributed innovation, globalization, R\&D spending}, issn = {0895-6308}, author = {Bowonder, B. and Racherla, J. K. and Mastakar, N. V. and Krishnan, S.} } @article {42472, title = {Reaction of diaryl-1,2-diones with triphenylphosphine and diethyl azodicarboxylate leading to N, N-dicarboethoxy monohydrazones via a novel rearrangement}, journal = {Organic Letters}, volume = {7}, year = {2005}, month = {MAY}, pages = {2121{\textendash}2123}, abstract = {

A mechanistically novel reaction of diaryl-1,2-diones with diethyl azodicarboxylate and triphenylphosphine to afford N,N-dicarboethoxy monohydrazones is described. The reaction proceeds via a nitrogen to nitrogen migration of a carboethoxy group.

}, doi = {10.1021/ol050403+}, author = {Nair, Vijay and Biju, Akkattu T. and Abhilash, K. G. and Menon, Rajeev S. and Eringathodi, Suresh} } @article {42473, title = {Reaction of huisgen zwitterion with 1,2-benzoquinones and isatins: expeditious synthesis of dihydro-1,2,3-benzoxadiazoles and spirooxadiazolines}, journal = {Organic Letters}, volume = {7}, year = {2005}, month = {OCT}, pages = {5139{\textendash}5142}, type = {Article}, abstract = {

The zwitterionic intermediate generated from dialkyl azodicarboxylate and triphenylphosphine on reaction with 3-methoxy-1,2-benzoquinones afforded dihydro-1,2,3-benzoxadiazoles. N-Substituted isatins furnished spirooxadiazolines under similar conditions.

}, doi = {10.1021/ol051956n}, author = {Nair, Vijay and Biju, Akkattu T. and Vinod, A. V. and Eringathodi, Suresh} } @conference { ISI:000238054400287, title = {Reactivity descriptors: conceptual and computational developments}, booktitle = {International Conference on Computational Methods in Sciences and Engineering (ICCMSE 2005)}, series = {LECTURE SERIES ON COMPUTER AND COMPUTATIONAL SCIENCES}, volume = {4A-4B}, year = {2005}, note = {International Conference on Computational Methods in Sciences and Engineering (ICCMSE 2005), Corinth, GREECE, OCT 21-26, 2005}, month = {OCT}, pages = {1172-1174}, publisher = {Vsp BV-C/o Brill Acad Publ, Po Box 9000, 2300 Pa Leiden, Netherlands}, organization = {Vsp BV-C/o Brill Acad Publ, Po Box 9000, 2300 Pa Leiden, Netherlands}, address = {Corinth, Greece}, isbn = {90-6764-443-9}, issn = {1573-4196}, author = {Pal, Sourav}, editor = {Simos, T. and Maroulis, G.} } @article { ISI:000226290900011, title = {Rearrangement of allyl phenyl ether over Al-MCM-41}, journal = {Journal of Catalysis}, volume = {229}, number = {1}, year = {2005}, month = {JAN}, pages = {105-113}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Claisen rearrangement of allyl phenyl ether to o-allylphenol and a dihydrobenzofuran derivative was investigated over MCM-41 with different Si/Al ratios. Higher aluminum content, higher reaction temperatures, and longer run duration favor the formation of the ring compound 2,3-dihydro-2-methyl benzofuran. There is a close relationship between acidity and conversion, which suggests that the reaction occurs inside the large pores of MCM-41. The influence of temperature and catalyst Si/Al ratio on the reaction are examined by kinetic analysis, under the assumption of a first-order consecutive reaction. (C) 2004 Elsevier Inc. All rights reserved.

}, keywords = {Al-MCM-41, allyl phenyl ether, Claisen rearrangement, Mesoporous material, molecular rearrangement, Solid acids}, issn = {0021-9517}, doi = {10.1016/j.jcat.2004.09.027}, author = {Mathew, Nevin T. and Khaire, S. and Mayadevi, S. and Jha, Ratnesh Kumar and Sivasanker, S.} } @article { ISI:000229751800049, title = {Reassessment of the binary, ternary, and quaternary interactions in mixed electrolytes from thermodynamic quantities: the systems with uncommon ions containing hydrophobic character}, journal = {Journal of Physical Chemistry B}, volume = {109}, number = {23}, year = {2005}, month = {JUN}, pages = {11743-11752}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Accurate estimates of the binary, ternary, and quaternary interactions in aqueous ionic mixtures with uncommon ions with hydrophobic character are presented. For this purpose, the values of the excess Gibbs free energy of mixing, Delta(m)G(E), obtained from our earlier isopiestic osmotic coefficients (Kumar, A. J. Phys. Chem. B 2003. 107, 2808) for the mixtures of NaCl with four guanidinium (Gn(+)) salts-CH(3)COOGn, GnNO(3), GnClO(4), and Gn(2)SO(4) are analyzed with the help of the method developed by Leifer and Wigent. The methodology of Leifer and Wigent is based on the equations of Scatchard-Rush-Johnson and Friedman{\textquoteright}s cluster integral expansion theory. The Scatchard-Rush-Johnson theory explicitly considers the quaternary and higher-order ionic interactions in the mixtures as compared to the specific ion interaction theory of Pitzer, which accounts for binary and ternary interactions only. The contributions due to binary, ternary, and quaternary interaction terms to total Delta(m)G(E) are estimated and discussed critically. Also, the interaction between the same two cations, for example, Gn(+)-Gn(+), is estimated and found significant, which otherwise cannot be obtained by the use of Pitzer{\textquoteright}s theory. The information obtained from the analysis of Delta(m)G(E) is also supported by the newly measured excess volumes of mixing, Delta(m)V(E), at 298.15 K. The individual contributions of the binary, ternary, and quaternary interaction terms to total Delta(m)V(E) are described. The binary, ternary, and quaternary interaction terms for both Delta(m)G(E) and Delta(m)V(E) are analyzed in terms of Friedman{\textquoteright}s cluster integral expansion theory.

}, issn = {1520-6106}, doi = {10.1021/jp050012c}, author = {Kumar, Anil} } @article { ISI:000229119800001, title = {Recent advances in biodegradable nanocomposites}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {5}, number = {4}, year = {2005}, month = {APR}, pages = {497-526}, publisher = {AMER SCIENTIFIC PUBLISHERS}, type = {Article}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

There is growing interest in developing bio-based products and innovative process technologies that can reduce the dependence on fossil fuel and move to a sustainable materials basis. Biodegradable bio-based nanocomposites are the next generation of materials for the future. Renewable resource-based biodegradable polymers including cellulosic plastic (plastic made from wood), corn-derived plastics, and polyhydroxyalkanoates (plastics made from bacterial sources) are some of the potential biopolymers which, in combination with nanoclay reinforcement, can produce nanocomposites for a variety of applications. Nanocomposites of this category are expected to possess improved strength and stiffness with little sacrifice of toughness, reduced gas/water vapor permeability, a lower coefficient of thermal expansion, and an increased heat deflection temperature, opening an opportunity for the use of new, high performance, lightweight green nanocomposite materials to replace conventional petroleum-based composites. The present review addresses this green material, including its technical difficulties and their solutions.

}, keywords = {cellulose, layered silicates and properties, Nanocomposite, poly(caprolactone)s, poly(hydroxy alkanoate)s, polyiactic acid, Starch}, issn = {1533-4880}, doi = {10.1166/jnn.2005.111}, author = {Pandey, J. K. and Kumar, A. P. and Misra, M. and Mohanty, A. K. and Drzal, L. T. and Singh, R. P.} } @conference { ISI:000229432300024, title = {Recent applications of chloroaluminate ionic liquids in promoting organic reactions}, booktitle = {Symposium on Ionic Liquids - Fundamentals, Progress, Challenges and Opportunities held at the 226th American-Chemical-Society National Meeting}, series = {ACS Symposium Series}, volume = {902}, year = {2005}, note = {Symposium on Ionic Liquids - Fundamentals, Progress, Challenges and Opportunities held at the 226th American-Chemical-Society National Meeting, New York, NY, SEP 07-11, 2003}, month = {SEP}, pages = {350-370}, publisher = {Amer Chemical Soc, 1155 Sixteenth ST NW, Washington, DC 20036 USA}, organization = {Amer Chemical Soc, 1155 Sixteenth ST NW, Washington, DC 20036 USA}, address = {New York, USA}, abstract = {

Chloroaluminate ionic liquids composed of AICl(3) and organic cations can promote a variety of organic reactions. The composition of these chloroaluminate ionic liquids governs the acidity and basicity of solvent media, in which the reactions are carried out. Useful physico-chemical properties of these ionic liquids and the recent work on their role in accelerating organic reactions are described in the present article.

}, isbn = {0-8412-3893-6}, issn = {0097-6156}, author = {Kumar, Anil and Sarma, Diganta}, editor = {Rogers, R. D. and Seddon, K. R.} } @article { ISI:000231744300010, title = {Regression models using pattern search assisted least square support vector machines}, journal = {Chemical Engineering Research and Design}, volume = {83}, number = {A8}, year = {2005}, month = {AUG}, pages = {1030-1037}, publisher = {INST CHEMICAL ENGINEERS}, type = {Article}, address = {165-189 RAILWAY TERRACE, DAVIS BLDG, RUGBY CV21 3HQ, ENGLAND}, abstract = {

Least Square Support Vector Machines (LS-SVM), a new machine-learning tool has been employed for developing data driven models of non-linear processes. The method is firmly rooted in the statistical learning theory and transforms the input data to a higher dimensional feature space where the use of appropriate kernel functions avoid computational difficulty. Further, a pattern search algorithm, which explores multiple directions and utilizes coordinate search with fixed step size, is employed for selecting optimal LS-SVM model that produces a minimum possible prediction error. To show the efficacy and efficiency of the fully automated pattern search assisted LS-SVM methodology, we have tested it on several benchmark examples. The study suggests that proposed paradigm can be a useful and viable tool in building data driven models of non-linear processes.

}, keywords = {equality constraints, LS-SVM, model selection, Optimization, pattern search}, issn = {0263-8762}, doi = {10.1205/cherd.03144}, author = {Patil, N. S. and Shelokar, P. S. and Jayaraman, Valadi K. and Kulkarni, B. D.} } @article { ISI:000228867800003, title = {Response of trichogramma chilonis to infochemicals: an SEM and electrophysiological investigation}, journal = {Biocontrol}, volume = {50}, number = {3}, year = {2005}, month = {JUN}, pages = {429-447}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The external morphology and peripheral olfactory responses of antennal chemoreceptors of Trichogramma chilonis Ishii (Hymenoptera:Trichogrammatidae) to host related stimuli were examined by SEM and EAG technique respectively. The antennae of male and female T. chilonis reveal strong sexual dimorphism in structure as well as in types, density and distribution of individual sensillar types. The female antennae are characterized by the presence of a single uniporous sensilla on the apical tip of the dome and numerous multiporous pitted sensilla. Sensilla common to both males and females include the multiporous plate sensilla, the peg sensilla and trichoid sensilla. Differences between males and females occur with respect to their EAG profiles to 22 chemicals commonly found in plants viz., hexanal, β-pinene, citronellal, terpinene, citronellol, phytol, caryophyllene, R-(+)-limonene, linalool, carvacrol, cis-3-hexen-1-ol, ethanol, α-pinene, trans-2-hexanal, α-phellandrene, amyl acetate, cineole, quinolene, S-(-)limonene, β-myrcene, carvone, terpineol; hexane leaf extracts of three host plants of Helicoverpa armigera (cotton, chickpea and pigeon pea) and hexane scale extracts of adult males and females of H. armigera. Individually, the largest peak amplitudes in females were obtained with citronellal, phytol, caryophyllene, R-(+)-limonene, linalool, carvacrol and citronellol while in males citronellol, caryophyllene, linalool, R-(+)-limonene and amyl acetate caused the highest response. Among the different chemical classes, the largest peak amplitudes in females were obtained with oxygenated monoterpenes, while in males, fatty acid derivatives caused the highest response. In both males and females, the hydrocarbon monoterpenes caused the least response. Thus, the wide spectrum response of Trichogramma chilonis, to a wide group of chemicals belonging to different chemical classes, though varying, nevertheless suggests that using plant information enhances its parasitization efficiency.

}, keywords = {antennae, Chickpea, cotton, EAG, parasitoid, pigeon pea, scanning electron microscopy, Trichogramma chilonis, Volatiles}, issn = {1386-6141}, doi = {10.1007/s10526-004-1295-1}, author = {Sen, A and Raina, R and Joseph, Mary P. and Tungikar, VB} } @article {42687, title = {Reversible transformations of gold nanoparticle morphology}, journal = {Langmuir}, volume = {21}, year = {2005}, month = {SEP}, pages = {10280{\textendash}10283}, type = {Article}, abstract = {

Herein is reported a metamorphosis taking place in a gold nanosized system. The observed phenomenon of shape and size transformations was found to be completely reversible. Unlike most procedures in the literature where shape and size control occur in the synthetic step by adding growth- and shape-controlling agents such as surfactants or polymers, in this system postsynthetic changes in shape and size can be carried out simply by changing the ratio of reactive, competing reagents, more specifically, alkylthiols versus tetralkylammonium salts. Interestingly, the transfer of gold metal occurs (large prismatic particles to small particles and vice versa) under the influence of reagents that do not cause such interactions with bulk gold. All intermediate steps of the morphology change were observed using HRTEM and electron diffraction. The processes of breaking down and {\textquotedblleft}welding back{\textquotedblright} solid metal nanoparticles occur under mild conditions and are remarkable examples of the unique chemical properties of nanomaterials. The described process is expected to be relevant to other nanoscale systems where similar structural circumstances could occur.

}, doi = {10.1021/la051699v}, author = {Stoeva, Savka I. and Zaikovski, Vladimir and Bhagavatula L. V. Prasad and Stoimenov, Peter K. and Sorensen, Christopher M. and Klabunde, Kenneth J.} } @article {42553, title = {Review on bubble formation, rise and break-up in a gas-liquid system}, journal = {Industrial \& Engineering Chemistry Research}, volume = {44}, year = {2005}, month = {MAY}, pages = {5873{\textendash}5931}, type = {Review}, abstract = {

The formation of gas bubbles and their subsequent rise due to buoyancy are very important fundamental phenomena that contribute significantly to the hydrodynamics in gas-liquid reactors. The rise of a bubble in dispersion can be associated with possible coalescence and dispersion followed by its disengagement from the system. The phenomenon of bubble formation decides the primitive bubble size in the system (which latter attains an equilibrium size), whereas the rise velocity decides the characteristic contact time between the phases which governs the interfacial transport phenomena as well as mixing. In view of their importance, we herein present a comprehensive review of bubble formation and bubble rise velocity in gas-liquid systems. The emphasis of this review is to illustrate the present status of the subjects under consideration and to highlight the possible future directions for further understanding of the subject. The bubble formation at a single submerged orifice and on multipoint sieve trays in Newtonian as well as non-Newtonian stagnant and flowing liquids is discussed in detail, which includes its mechanism as well as the effect of several system and operating parameters on the bubble size. The comparison of results has shown that the formulation of Gaddis and Vogelpohl22 is the most suitable for the estimation of bubble size in stagnant liquids. The special cases, such as bubble formation in reduced gravity conditions and weeping and in flowing liquids, are discussed in detail. The section on the rise of a gas bubble in liquid covers the various parameters governing bubble rise and their effect on the rise velocity. A comprehensive comparison of the various formulations is made by validating the predictions with experimental data for Newtonian as well as non-Newtonian liquids, published over last several decades. The results highlight that for the estimation of rise velocity in (i) pure Newtonian liquids, (ii) contaminated Newtonian liquids, and (iii) non-Newtonian liquids, the formulation based on the wave theory by Mendelson,190 Nguyen{\textquoteright}s formulation,155 and the formulation by Rodrigues,153 (last two, based on the dimensional analysis), respectively are the most suitable. The motion of bubbles in non-Newtonian liquids and the reason behind the discontinuity in the velocity are also discussed in detail. The bubble rise is also analyzed in terms of the drag coefficient for different system parameters and bubble sizes.

}, doi = {10.1021/ie049131p}, author = {Kulkarni, Amol A. and Joshi, Jyeshtharaj B.} } @article { ISI:000228575900026, title = {Ring-closing metathesis mediated total synthesis of microcarpalide and herbarumin III}, journal = {Arkivoc}, number = {3}, year = {2005}, month = {FEB}, pages = {237-257}, publisher = {ARKAT USA INC}, address = {C/O ALAN R KATRITZKY, UNIV FLORIDA, DEPT CHEMISTRY, PO BOX 117200, GAINESVILLE, FL 32611 USA}, abstract = {

Total synthesis of naturally occurring microcarpalide and herbarumin III are described. The ring-closing metathesis (RCM) approach to coin the medium sized rings present in their molecular structures form the basic premise of this investigation.

}, keywords = {herbarumin III, microcarpalide, microfilament, phosphodiesterase, ring-closing metathesis (RCM)}, author = {Gurjar, M. K. and Nagaprasad, R. and Ramana, C. V. and Karmakar, S. and Mohapatra, Debendra K.} } @article { ISI:000233062500003, title = {Role of a co-metal in bimetallic Ni-Pt catalyst for hydrogenation of m-dinitrobenzene to m-phenylenediamine}, journal = {Applied Catalysis A-General}, volume = {295}, number = {1}, year = {2005}, month = {OCT}, pages = {23-30}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Bimetallic Ni-Pt catalysts supported on carbon were found to give very high turn over frequency numbers and almost complete selectivity to m-phenylenediamine in m-dinitrobenzene hydrogenation as compared to the monometallic nickel catalysts. The XRD and XPS characterization revealed that most of the nickel remains as Ni2+ in a monometallic catalyst while, the addition of platinum leads to the stabilization of Ni-0 state, in case of bimetallic catalysts. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Bimetallic catalyst, Catalytic hydrogenation, m-dinitrobenzene, m-phenylenediamine, Selective hydrogenation, turn over number, XPS and XRD of nickel}, issn = {0926-860X}, doi = {10.1016/j.apcata.2005.07.050}, author = {Telkar, M. M. and Nadgeri, J. M. and Rode, C. V. and Chaudhari, R.} } @article { ISI:000231067500001, title = {Role of Mg ions in modulating the morphology and structure of CaCO3 crystals grown in aqueous foams}, journal = {CrystEngComm}, volume = {7}, year = {2005}, month = {JUL}, pages = {469-475}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We investigate the role of magnesium ions in modulating the morphology and crystallography of CaCO3 crystals grown in aqueous foam. This is accomplished by first making foams from an aqueous mixture of CaCl2+MgCl2 and the anionic surfactant aerosol-OT (AOT) followed by reaction of the foam with Na2CO3 solution. The Ca2+ and Mg2+ ions electrostatically complex with AOT and react with Na2CO3 within the foam to yield CaCO3 crystals of interesting morphology. These studies indicate that CaCO3 in a fractured, needle-like morphology was formed at high Mg2+ concentrations in the foam whereas porous, rhombic CaCO3 crystals were obtained at low Mg2+ concentrations. The effect of water drainage time and thereby, the structure of the foam on the morphology of the CaCO3 crystals grown was also studied.

}, issn = {1466-8033}, doi = {10.1039/b501420b}, author = {Rautaray, Debabrata and Kasture, Manasi and Sastry, M.} } @article { ISI:000229298200025, title = {Role of non-linear processes in conducting polymer blends for piezo-sensors Part 2: studies on polyaniline/SBS blends}, journal = {Sensors and Actuators A-Physical}, volume = {120}, number = {2}, year = {2005}, month = {MAY}, pages = {474-481}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The electrical properties and piezo-response of conducting polymer blends have been investigated with respect to composition for styrene-butadiene-styrene (SBS) elastomer containing two grades of polyaniline (PANI). The blends were synthesized using solution/dispersion technique in which the conducting PANI was prepared with either HCl or dodecyl benzene sulfonic acid (DBSA) as dopant. Thick sheets cast from these exhibited high piezo-sensitive electrical resistance even at small mechanical load. The pressure dependence of resistance followed a non-linear power law of the type R = KP-m where K and m values changed considerably with composition. The current voltage characteristics in these blends were found to be highly non-linear and the conduction mechanism was either space charge limited or tunneling type depending on the concentration and nature of conducting additive. These various results have been explained on the basis of the phenomenological model developed incorporating the non-linear processes for electrical and mechanical properties. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {conducting polymer, non-linear process, piezo-sensors}, issn = {0924-4247}, doi = {10.1016/j.sna.2005.01.037}, author = {Radhakrishnan, S and Kar, Swarnendu B.} } @article { ISI:000227930800010, title = {Room temperature ionic liquid promoted improved and rapid synthesis of 2,4,5-triaryl imidazoles from aryl aldehydes and 1,2-diketones or alpha-hydroxyketone}, journal = {Tetrahedron}, volume = {61}, number = {14}, year = {2005}, month = {APR}, pages = {3539-3546}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An improved and rapid one-pot synthesis of 2,4,5-triaryl imidazoles in a room temperature ionic liquid is described, which does not need any added catalyst. Different ionic liquids based on 1-n-butyl and 1,3-di-n-butyl imidazolium salts were screened and their efficacy in terms of acidity and polarity have been correlated with yields and reaction period. The one-pot methodology resulting in excellent isolated yields in short reaction times is characterized by simple work up procedures and efficient recovery and recycling of the ionic liquid, which acts as a promoter. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {1, 2, 2-Diketones, 4, 5-triaryl imidazoles, alpha-hydroxyketone, ammonium acetate, benzaldehydes, ionic liquid (IL)}, issn = {0040-4020}, doi = {10.1016/j.tet.2005.01.116}, author = {Siddiqui, S. A. and Narkhede, U. C. and Palimkar, S. S. and Daniel, Thomas and Lahoti, Rajgopal J. and Srinivasan, K. V.} } @article { ISI:000229567400027, title = {Room temperature nitric oxide sensor actualized from Ru-doped SnO2 nanowires}, journal = {Sensors and Actuators B - Chemical}, volume = {107}, number = {2}, year = {2005}, month = {JUN}, pages = {708-715}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

We report synthesis of the novel Ru-doped SnO2 nanowires and their distinctive response towards NO., and liquefied petroleum gas (LPG) in air. These nanowires have been prepared by a simple approach of evaporation of metal oxide at elevated temperature, The sensor exhibits three order of magnitude changes in the conductivity on exposure to NO2 in air at room temperature, Furthermore. Ru being one of the excellent sensitizers towards LPG these wires also exhibits sensitivity at 250\° C. The amount of Ru plays a crucial role in modulating the sensitivity and lowering the operating temperature. {\textcopyright} 2005 Elsevier B.V. All rights reserved.

}, keywords = {LPG, Nanowires, NO2, tin oxide ruthenium oxide}, issn = {0925-4005}, doi = {10.1016/j.snb.2004.12.073}, author = {Ramgir, N. S. and Mulla, Imtiaz S. and Vijayamohanan, K. P.} } @article { ISI:000238086600005, title = {Radiation assisted synthesis of nanosized barium zirconate}, journal = {Radiation Physics and Chemistry}, volume = {75}, number = {7}, year = {2006}, month = {JUL}, pages = {755-759}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

This paper reports the synthesis of refractory barium zirconate using solid-state reactive precursors subjected to gamma-radiations of a Co-60 source. Influence of varying doses on the formation of cubic phase of BaZrO3 has been investigated with the stepwise analysis of the intermediate products by means of FT-IR, XRD and TGA techniques. TEM depicts the nanospherical nature of the BaZrO3 particles. (C) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {Ceramics, gamma-radiation, Nanoparticles, perovskite, refractory, XRD}, issn = {0969-806X}, doi = {10.1016/j.radphyschem.2005.12.041}, author = {Athawale, Anjali A. and Chandwadkar, Asha J. and Karandikar, Prashant R. and Pasricha, R. and Bapat, Malini S.} } @article { ISI:000237600800007, title = {Rapid molecular identification of freshly squeezed and reconstituted orange juice}, journal = { International Journal of Food Science and Technology}, volume = {41}, number = {6}, year = {2006}, month = {JUN}, pages = {646-651}, publisher = {BLACKWELL PUBLISHING}, type = {Article}, address = {9600 GARSINGTON RD, OXFORD OX4 2DQ, OXON, ENGLAND}, abstract = {

This work presents a rapid and accurate molecular approach in the identification of freshly squeezed and reconstituted orange juice. Primers were designed based on the 18S and internal transcribed spacer (ITS) region. The findings indicated that self-made freshly squeezed orange juice heated to 80 degrees C for 30 s caused damage to DNA integrity, thus failing in amplification by primer 18S-ITSe, which gives a polymerase chain reaction product of 2081 bp, whereas primer 18S-ITSf, fragment length 2421 bp, could only be seen in heating conditions less stringent than 70 degrees C, 15 s. This new DNA integrity-dependent method has potential applications in identifying adulteration of freshly or processed orange juice.

}, keywords = {adulteration, citrus, DNA degradation, molecular detection, reconstituted juice}, issn = {0950-5423}, doi = {10.1111/j.1365-2621.2006.01125.x}, author = {Ng, C. C. and Chang, C. C. and Wu, I. C. and Kotwal, S. and Shyu, Y. T.} } @article { ISI:000237725100015, title = {Regioselective nitration of cumene to 4-nitro cumene using nitric acid over solid acid catalyst}, journal = {Catalysis Communications}, volume = {7}, number = {6}, year = {2006}, month = {JUN}, pages = {394-398}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The regioselective nitration of cumene to 4-nitro cumene (4-NC) has been carried out using 70\% nitric acid over MoO3/SiO2 solid acid catalyst with high conversion (62\%) and selectivity (68\%) for 4-NC. A series of MoO3/SiO2 catalysts with different MoO3 loadings (1-20 mol\%) were prepared by sol-gel technique and characterized using different characterization techniques. XRD analysis revealed the amorphous nature of the catalyst up to 10-mol\% MoO3 loading and formation of alpha-MoO3 crystalline phase on amorphous high surface area mesoporous silica support at higher MoO3 loading. Maximum conversion and selectivity has been obtained with slower addition of nitric acid and simultaneous azeotropic removal of water formed during the reaction. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {cumene, nitration, ring nitration, side chain nitration, solid acid catalyst}, issn = {1566-7367}, doi = {10.1016/j.catcom.2005.12.022}, author = {Mathew, Sanyo M. and Biradar, Ankush V. and Shubhangi B. Umbarkar and Dongare, Mohan K.} } @article {Datar, title = {Remarkably rapid regioselective synthesis of beta-enaminones using silica chloride in a heterogeneous as well as an ionic liquid in a homogeneous medium at room temperature}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {245}, number = {1-2}, year = {2006}, note = {6th International Conference on Solvothermal Reactions, Mysore, INDIA, AUG 24-27, 2004}, month = {FEB}, pages = {37-46}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, type = {Article}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

{Silica chloride as a heterogeneous catalyst has been used for the regioselective synthesis of P-amino-a,P unsaturated esters and ketones. Similar regioselective synthesis was also performed using an ionic liquid 1-n-butyl imidazolium tetrafluoroborate [

}, keywords = {direct oxidation of H-2 to H2O2, H2O2 decomposition, H2O2 hydrogenation, Promoting action of chloride or bromide anions, supported Pd catalysts}, issn = {0021-9517}, doi = {10.1016/j.molcata.2005.09.021}, author = {Gholap, Atul R. and Chakor, N. S. and Daniel, Thomas and Lahoti, Rajgopal J. and Srinivasan, K. V.} } @article { ISI:000238843200010, title = {Repetitive somatic embryogenesis and plant regeneration in Garcinia indica Choiss}, journal = {In Vitro Cellular \& Developmental Biology-Plant}, volume = {42}, number = {3}, year = {2006}, month = {MAY}, pages = {256-261}, publisher = {CABI PUBLISHING}, type = {Article}, address = {C/O PUBLISHING DIVISION, NOSWORTHY WAY, WALLINGFORD OX10 8DE, OXON, ENGLAND}, abstract = {

Immature seeds of Garcinia indica Choiss. were excised from immature fruits and cultured on Lloyd and McCown (1980), woody plant medium (WPM) with different combinations of auxins and cytokinins. Somatic embryos were obtained on the media supplemented with 6-benzylaminopurine (BA; 2.2-22.1 mu M) alone or in combination with alpha-naphthalene acetic acid (NAA; 2.6 mu M) with 80\% frequency within a period of 2-3 wk. Subculture of embryos on medium containing BA (16.0 mu M) supplemented with indole-3-acetic acid (IAA; 2.8-5.7 mu M) and/or kinetin (4.6 mu M) gave rise to clusters of secondary somatic embryos along with maturation of primary embryos. In subsequent subculture on hormone-free half-strength WPM, the embryo clusters germinated with an increase in the number of secondary somatic embryos. About 70\% of somatic embryos germinated into complete plantlets, which were successfully established under greenhouse conditions.

}, keywords = {Garcinia indica, guttifereae, secondary somatic embryos, seeds, somatic embryos}, issn = {1054-5476}, doi = {10.1079/IVP2006763}, author = {Thengane, Shubhada Ratnakar and Deodhar, Swapna R. and Bhosle, S. V. and Rawal, S. K.} } @article { ISI:000241197300015, title = {Response characteristics of conducting polypyrrole bi-layer actuators: role of backing layer polymer}, journal = {Sensors and Actuators B-Chemical}, volume = {119}, number = {1}, year = {2006}, month = {NOV}, pages = {94-98}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The response of a bi-layer conducting polymer-based actuator has been studied with respect to various parameters such as backing layer thickness, backing layer modulus, applied voltage, etc. The bending angles for the bi-layer actuators made by depositing, conducting polypyrrole (PPy) films on backing layers using LDPE/LLDPE, SBS, Hytrel, PP, PET materials have been compared. The response of the bi-layer actuators indicates that there is optimum for the backing layer thickness as well as its material modulus together with the thickness of the conducting polymer at which the maximum bending is observed. Other geometrical parameters such as a length to width ratio also influence the response of these actuators and have to be chosen properly for the best actuator performance. (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {actuator, bi-layer, conducting polymer, polypyrrole, response}, issn = {0925-4005}, doi = {10.1016/j.snb.2005.11.061}, author = {Radhakrishnan, S. and Kar, Swarnendu B.} } @article { ISI:000239001900001, title = {Re-tooling Benson{\textquoteright}s group additivity method for estimation of the enthalpy of formation of free radicals: C/H and C/H/O groups}, journal = {Journal of Chemical and Engineering Data}, volume = {51}, number = {4}, year = {2006}, month = {JUL}, pages = {1169-1181}, publisher = {AMER CHEMICAL SOC}, type = {Review}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Enthalpy of formation of free radicals is often required for the discrimination of reaction mechanisms (for complex processes such as combustion, hydrocarbon oxidation, or decomposition of peroxides and hydroperoxides) involving both molecular species and free radicals. Despite the expanding availability of the experimental measurements, the database for the enthalpy of formation of radicals is still not comprehensive. One of the simplest, efficient, and reliable methods for estimating the quantity for organic radicals from their molecular structure is the group-additivity method due to Benson and co-workers. Perusal of the literature shows that the group-additivity values (GAV) for many radical groups have remained either undetermined or obtained by assignment to the corresponding molecular groups without justification. In this paper, we devise simple methodologies to evaluate GAVs for a number of new oxygen-containing radical groups and re-estimate several alkyl and oxygen-containing radical groups using experimental data on the radical enthalpy of formation. The validity of these GAVs has been established by comparing the predicted enthalpies with experimental data. Finally, some of these updated GAVs were used in estimating the enthalpy change associated with the typical elementary steps in a peroxide decomposition reaction.

}, issn = {0021-9568}, doi = {10.1021/je0503960}, author = {Bhattacharya, Arijit and Shivalkar, Sagar} } @article { ISI:000236691000034, title = {Reverse microemulsion mediated sol-gel synthesis of lithium silicate nanoparticles under ambient conditions: Scope for CO2 sequestration}, journal = {Chemical Engineering Science}, volume = {61}, number = {10}, year = {2006}, month = {MAY}, pages = {3415-3418}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

We report on the synthesis of nanocrystalline lithium silicate by coupling of sol-gel method in reverse microemulsion. The sample calcined at 800 degrees C gives pure phase lithium metasilicate nanocrystallites. X-ray diffraction and transmission electron microscopy confirmed the formation of nanocrystalline lithium silicate particles with a narrow size distribution. The nanoparticle prepared in the microemulsion shows enhanced CO2 sorption capacity and shorter retention times at higher temperature (similar to 131 ml/g at STP at 610 degrees C which are better than the best known results. (c) 2005 Elsevier Ltd. All rights reserved.

}, keywords = {Adsorption, Carbon dioxide, Microemulsion, particle, separations, sol-gel, surfactant}, issn = {0009-2509}, doi = {10.1016/j.ces.2005.11.065}, author = {Khomane, Ramdas B. and Sharma, B. K. and Saha, S. and Kulkarni, B. D.} } @article { ISI:000242873400029, title = {Ring closing metathesis approach to the indole alkaloid mitralactonine}, journal = {Tetrahedron Letters}, volume = {47}, number = {52}, year = {2006}, month = {DEC}, pages = {9301-9303}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An efficient utilisation of RCM leading to a convenient synthesis of a pentacyclic indole alkaloid is described. (c) 2006 Elsevier Ltd. All rights reserved.

}, keywords = {corynanthe type alkaloid, Dihydroxylation, mitralactonine, RCM, Swern oxidation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2006.10.106}, author = {Chavan, Subhash P. and Sharma, Pallavi and Sivappa, R. and Kalkote, Uttam R.} } @article { ISI:000238416100033, title = {Ring hydrogenation of naphthalene and 1-naphthol over supported metal catalysts in supercritical carbon dioxide solvent}, journal = {Catalysis Today}, volume = {115}, number = {1-4}, year = {2006}, note = {8th International Conference on Carbon Dioxide Utilization, Univ Oslo, Oslo, NORWAY, JUN 20-23, 2005}, month = {JUN}, pages = {248-253}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Catalytic ring hydrogenations of naphthalene and 1-naphthol were studied over several supported metal catalysts in supercritical carbon dioxide solvent at low temperature. Higher concentration of hydrogen in supercritical carbon dioxide and lower reaction temperature were responsible for higher catalyst activity and selectivities to the desired partial ring hydrogenated products as compared with those observed in organic solvent for the same catalyst. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {1-naphthol, Hydrogenation, Naphthalene, Supercritical carbon dioxide, supported metal catalyst}, issn = {0920-5861}, doi = {10.1016/j.cattod.2006.02.048}, author = {Shirai, M. and Rode, C. V. and Mine, Eiichi and Sasaki, A. and Sato, O. and Hiyoshi, Norihito} } @article { ISI:000237003000008, title = {Role of dopant ions in electrocatalytic oxidation of methanol using conducting polypyrrole electrodes}, journal = {Journal of Power Sources}, volume = {155}, number = {2}, year = {2006}, month = {APR}, pages = {157-160}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Conducting polypyrrole electrodes obtained by electro-polymerization of pyrrole on vacuum metallized glass substrates are modified by doping with a range of metal halides as dopant ions having different electronegativity. Electro-oxidation of methanol using these electrodes is studied by means of cyclic voltammetry in 0.1 M HCiO(4) as supporting electrolyte. It is found that the electronegativity of the dopant ion plays a very important role in the electrocatalytic activity. Polypyrrole doped with zirconium chloride gives the highest anodic current of 10 mA cm(-2) at the oxidation potential of methanol. The results are explained on the basis of the charge-transfer efficiency at the electrode I electrolyte interface, which is associated with the acceptor state created by the dopant in the semi-conducting polymer. (c) 2005 Published by Elsevier B.V.

}, keywords = {conducting polymers, electrocatalysis, fuel cells, Methanol oxidation, polypyrrole}, issn = {0378-7753}, doi = {10.1016/j.jpowsour.2005.03.234}, author = {Radhakrishnan, S. and Adhikari, Arindam} } @article { ISI:000241361400002, title = {Role of glucose in production and repression of polygalacturonase and pectate lyase from phytopathogenic fungus Fusarium moniliforme NCIM 1276}, journal = {World Journal of Microbiology \& Biotechnology}, volume = {22}, number = {9}, year = {2006}, month = {SEP}, pages = {893-899}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

A mangrove fungal isolate Fusarium moniliforme NCIM 1276 was found to produce the maximum extracellular endopolygalacturonase and pectate lyase activities in liquid medium containing 1\% citrus pectin and 0.2\% glucose at pH 5 and pH 8, respectively. The enzyme secretion started after 10 h, when the spores were completely germinated, and maximum production occurred after 72 h in the extracellular medium. The production of polygalacturonase was enhanced by 0.2\% glucose and completely repressed by 1\% glucose. Pectate lyase secretion was also induced by a similar concentration of glucose in the extracellular medium and significantly decreased at 1\% glucose. Quantification of extracellular and intracellular polygalacturonase and pectate lyase protein concentrations by ELISA and immunocytolocalization data suggested that glucose may control the expression of both enzymes at a transcriptional level.

}, keywords = {catabolic repression, Fusarium moniliforme, inducible enzyme, pectate lyase, polygalacturonase}, issn = {0959-3993}, doi = {10.1007/s11274-006-9119-3}, author = {Niture, Suryakant K. and Kumar, Ameeta R. and Pant, Aditi} } @article {18}, title = {Role of halide ions and temperature on the morphology of biologically synthesized gold nanotriangles}, journal = {Langmuir}, volume = {22}, number = {2}, year = {2006}, month = {JAN}, pages = {736-741}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

{In this paper, we demonstrate the effect of halide ions on the formation of biogenically prepared gold nanotriangles using the leaf extract of lemongrass (Cymbopogonflextiosus) plant. We have also studied the effect of halide ions on the morphology of biogenic nanotriangles. It has been shown that iodide ions have a greater propensity to transform flat gold nanotriangles into circular disklike structures as compared to other halide ions. The study also suggests that the presence of Cl- ions during the synthesis promotes the growth of nanotriangles, whereas the presence of I- ions distorts the nanotriangle morphology and induces the formation of aggregated spherical nanoparticles. The change in the morphology of gold nanotriangles has been explained in terms of the ability of the halide ions to stabilize or inhibit the formation of (I 11) faces to form [

}, keywords = {DME steam reforming, fuel cells, Hydrogen, Mixed oxides, supported Ga2O3, XPS}, issn = {1520-6106}, doi = {10.1021/la052055q}, author = {Rai, A. and Singh, A. and Ahmad, Absar and Sastry, M.} } @article { ISI:000241949000010, title = {Role of ligands in the formation, phase stabilization, structural and magnetic properties of alpha-Fe2O3 nanoparticles}, journal = {Journal of Nanoparticle Research}, volume = {8}, number = {5}, year = {2006}, month = {OCT}, pages = {635-643}, publisher = {SPRINGER}, type = {Article}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

The electrochemical synthesis of alpha Fe2O3 nanoparticles was performed using quaternary ammonium salts viz. TPAB, TBAB and TOAB in an organic medium by optimizing current density and molar concentration of the ligand. The role of ligands in the formation of alpha phase, structure and magnetic properties was investigated in details. The effect of increasing chain length on the particle size confirmed that as the chain length increases from propyl to octyl, the particle size decreases. X-ray diffraction spectra of as prepared samples and TEM analysis confirmed the amorphous nature of iron oxide. TEM showed beads of iron oxide joined together with a size distribution in the range of 6-30 nm. The Mossbauer studies also support this observation that for the lowest particle size, the line width is broader which successively reduces with increase in particle size. Iron oxide capped with TOAB indicated superparamagnetic nature at room temperature. The resultant internal magnetic field of 506 mm/s due to hyperfine splitting clearly established the formation of alpha-Fe2O3 The infrared spectroscopy and pH measurements revealed the binding of tetra alkyl ligand with iron oxide. The IR spectra and the increase in basicity of as prepared samples confirmed the formation of hydrated iron oxide. Above 800 degrees C the spectra indicated only iron oxide. Surface area obtained by BET method was 205 m(2)/g.

}, keywords = {Alkyl chain length, alpha-Fe2O3, Electrochemistry, magnetic properties, Nanoparticles, narrow size distribution}, issn = {1388-0764}, doi = {10.1007/s11051-005-9033-x}, author = {Joshi, Satyawati S. and Patil, Prajakta R. and Nimase, Madhav S. and Bakare, P. P.} } @article { ISI:000236922600002, title = {Room temperature synthesis of mesoporous aggregates of anatase TiO2 nanoparticles}, journal = {Materials Chemistry and Physics}, volume = {97}, number = {2-3}, year = {2006}, month = {JUN}, pages = {207-212}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The controlled hydrolysis reaction of titanium tetrabutoxide in presence of acetic acid in isopropanol, i.e. in non-aqueous media was adopted in the present work for the synthesis of nanocrystalline titania followed by aging at ambient conditions for longer duration. The powder XRD shows that the as-dried precursor (without any aging) is non-crystalline in nature. However, room temperature aging for longer duration \> 120 days not only helped to develop crystallinity in TiO2 nanoparticles but also led to the formation of their self-assembly towards mesoporous aggregates creating sponge like TiO2 nano-structure having high surface area similar to 250m (2) g(-1)and narrow pore size distribution of 4-5 nm. TEM observations revealed the generation of spherical TiO2 nanoparticles (4-5 nm) assembled to form stable spongy scaffold having porous network structure with pore size 5-6 nm. Also, presence of a pronounced hysteresis loop in BET isotherm is indicative of a 3D-intersection network of the pores of size 4-5 nm. Further heat-treatment to the aged precursor at 400 degrees C/2 h in air modify pore network structure due to sintering of TiO2 particles as is observed in TEM studies and lowering thereby the surface area to 125 m(2) g(-1) (c) 2005 Elsevier B.V. All rights reserved.

}, keywords = {Microstructure, porous materials, sol-gel processing, titania}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.02.014}, author = {Deshpande, S. B. and Potdar, H. S. and Khollam, Y. B. and Patil, K. R. and Pasricha, R. and Jacob, Nalini E.} } @article { ISI:000240291900046, title = {Room-temperature biosynthesis of ferroelectric barium titanate nanoparticles}, journal = {Journal of the American Chemical Society}, volume = {128}, number = {36}, year = {2006}, month = {SEP}, pages = {Article No. JA063011M}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The syntheses of inorganic materials by biological systems is characterized by processes that occur close to ambient temperatures, pressures, and neutral pH, as is exemplified by biosilicification and biomineralization processes in nature. Conversely, laboratory-based syntheses of oxide materials often require extremes of temperature and pressure. We have shown here the extracellular, room-temperature biosynthesis of 4-5 nm ternary oxide nanoparticles such as barium titanate (BT) using a fungus-mediated approach. The tetragonality as well as a lowered Curie transition temperature in sub-10 nm particles was established, and the ferroelectricity in these particles was shown using Kelvin probe microscopy.

}, issn = {0002-7863}, doi = {10.1021/ja063011m}, author = {Bansal, Vipul and Poddar, Pankaj and Ahmad, Absar and Sastry, Murali} } @article {42758, title = {Ruthenium(II), copper(I) and silver(I) complexes of large bite bisphosphinite, bis(2-diphenylphosphinoxynaphthalen-1-yl)methane: Application of Ru(II) complexes towards the hydrogenation of styrene and phenylacetylene}, journal = {Journal of Organometallic Chemistry}, volume = {691}, year = {2006}, month = {JUL}, pages = {4265{\textendash}4272}, type = {Article}, abstract = {

Ruthenium(II), copper(I) and silver(I) complexes of large bite bisphosphinite Ph2P{(-OC10H6)(μ-CH2)(C10H6O-)}PPh2 (1) are described. Reactions of bisphosphinite 1 with [Ru(η6-p-cymene)(μ-Cl)Cl]2 and RuCl2(PPh3)3 afford mono- and bis-chelate complexes [RuCl(η6-p-cymene){η2-Ph2P{(-OC10H6)(μ-CH2)(C10H6O-)}PPh2-κP,κP}]Cl (2) and trans-[RuCl2{η2-Ph2P{(-OC10H6)(μ-CH2)(C10H6O-)}PPh2-κP,κP}2] (3), respectively. Treatment of 1 with CuX (X = Cl, Br and I) furnish 10-membered chelate complexes of the type [Cu(X){η2-Ph2P(-OC10H6)(μ-CH2)(C10H6O-)PPh2-κP,κP}] (4, X = Cl; 5, X = Br; 6, X = I), whereas [Cu(MeCN)4]PF6 affords a bis-chelated cationic complex [Cu{η2-Ph2P(-OC10H6)(μ-CH2)(C10H6O-)PPh2-κP,κP}2][PF6] (7). Reaction between 1 and AgOTf produce both mono- and bis-chelated complexes [Ag{η2-Ph2P(-OC10H6)(μ-CH2)(C10H6O-)PPh2-κP,κP}(SO3CF3)] (8) and [Ag{η2-Ph2P(-OC10H6)(μ-CH2)(C10H6O-)PPh2-κP,κP}2][SO3CF3] (9), respectively; whereas the similar reaction of 1 with[Ag(OTf)PPh3] affords chelate complex of the type [Ag{η2-Ph2P(-OC10H6)(μ-CH2)(C10H6O-)PPh2-κP,κP}(PPh3)(SO3CF3)] (10). All the complexes were characterized by 1H NMR, 31P NMR, elemental analysis and mass spectrometry, including low-temperature NMR studies in the case of silver complexes. The molecular structures of 4 and 6 are determined by X-ray diffraction studies. Ruthenium complexes 2 and 3 promote catalytic hydrogenation of styrene and phenylacetylene with good turnover numbers.

}, doi = {10.1016/j.jorganchem.2006.06.040}, author = {Punji, Benudhar and Mague, Joel T. and Balakrishna, Maravanji S.} } @article { ISI:000242960400016, title = {Rate enhancement in palladium catalyzed Heck reactions by Lewis acid promoters}, journal = {Catalysis Communications}, volume = {8}, number = {2}, year = {2007}, month = {FEB}, pages = {183-186}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Significant enhancement in the rate of Heck reactions has been achieved when catalytic amounts of Lewis acid (like FeCl(3)) promoters in the presence of trace amounts of water (\> 2000 ppm) are used along with Pd complex catalysts. Experiments with different aryl halides, bases as well as olefins have been carried out to demonstrate the role of Lewis acid promoters. The increase in the reaction rates is due to the weakening of Ar-X bond by the Lewis acid in the manner similar to Friedel-Crafts reaction. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Heck reaction, Lewis acid, Palladium, Promoters}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.05.043}, author = {Sud, Abhishek and Deshpande, Raj Madhukar and Chaudhari, Raghunath V.} } @article {42462, title = {Reaction of huisgen zwitterion with diaryl-1,2-diones and ketones: an efficient protocol for carbon-nitrogen bond formation}, journal = {Synthesis-Stuttgart}, year = {2007}, month = {JAN}, pages = {697-704}, type = {Article}, abstract = {

The reaction of Huisgen zwitterion, derived from triphenylphosphine and dialkyl azodicarboxylate, with diaryl-1,2-diones afforded N,N-dicarboalkoxy monohydrazones via a mechanistically novel rearrangement. Cyclic and acyclic ketones furnished vinyl hydrazinedicarboxylates under similar conditions.

}, keywords = {betaines - diazo compounds - hydrazones - ketones - rearrangements}, doi = {10.1055/s-2007-965910}, author = {Nair, Vijay and Biju, Akkattu T. and Mathew, Smitha C.} } @article {42466, title = {Reaction of tpp-azodicarboxylate zwitterions and aldehydes: unprecedented synthesis of acyl carbamates}, journal = {Tetrahedron Letters}, volume = {48}, year = {2007}, month = {OCT}, pages = {9018{\textendash}9020}, type = {Article}, abstract = {

An efficient synthesis of acyl carbamates from aryl aldehydes by the reaction of triphenylphosphine and dialkyl azoesters is described.

}, doi = {10.1016/j.tetlet.2007.10.092}, author = {Nair, Vijay and Mathew, Smitha C. and Biju, Akkattu T. and Eringathodi, Suresh} } @article {Mueller, title = {Reactions of o-aminothiophenol and o-aminophenyl disulfide with itaconic anhydride and (-)-dimenthyl itaconate: access to enantiomerically pure 1,5-benzothiazepines and benzothiazolyl-2-methylacrylic acid}, journal = {Synthesis-Stuttgart}, number = {3}, year = {2007}, month = {FEB}, pages = {457-463}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

{A facile chemo- and regioselective reactions of o-aminothiophenol (o-ATP) with itaconic anhydride is described. 1,5-Benzothiazepinyl-3-acetic acid is obtained in 81\% yield via the exclusive Michael type addition of the thiol unit from o-ATP to the carbon-carbon double bond in itaconic anhydride followed by an intramolecular anhydride ring opening with an amine unit. The moderately stereoselective Michael type addition of the thiol unit from o-ATP to (-)-dimenthyl itaconate to obtain a mixture of diastereomers in a 7:3 ratio in 82\% yield has been demonstrated. The reductive sulfur-sulfur bond cleavage in the dicarboxylic acid, 2({2-[2-(3-carboxybut-3-enoylamino)phenyidisulfanyl]phenylcarbamoyl\

}, keywords = {Magnetic nanoparticles, magnetic properties, spin glasses}, issn = {0936-5214}, doi = {10.1055/s-2006-958977}, author = {Baag, Md. Merajuddin and Sahoo, Manoj Kumar and Puranik, Vedavati G. and N. P. Argade} } @article { ISI:000245961800014, title = {Reduction of oxygen by hydroxylammonium salt or hydroxylamine over supported Au nanoparticles for in situ generation of hydrogen peroxide in aqueous or non-aqueous medium}, journal = {Catalysis Communications}, volume = {8}, number = {5}, year = {2007}, month = {MAY}, pages = {811-816}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Reaction of O-2 with hydroxylamine or its salts over a number of supported gold catalysts containing An nanoparticles (at 10-70 degrees C) has been studied at atmospheric pressure for the in situ generation of H2O2 (required for organic oxidation reactions in the synthesis of fine/specialty chemicals) in aqueous (water) or non-aqueous medium. Hydrogen peroxide in high yields with harmless by-products (viz. water and nitrogen) can be generated in situ by the reduction Of O-2 by hydroxylammonium sulfate (or chloride) or hydroxylamine using the supported gold catalysts particularly Au/Gd2O3, Au/La2O3 and Au/MgO, in aqueous (water) or non-aqueous (viz. methanol) medium at close to ambient conditions. The reduction of O-2 by hydroxylammonium salt to H2O2, however, requires preneutralization of the salt by alkali; in the absence of the neutralization, only water is formed in the reaction. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {Au Nanoparticles, Au/Gd2O3, Au/La2O3, Au/MgO, Hydrogen peroxide, hydroxylamine, hydroxylammonium salts, in situ H2O2 generation}, issn = {1566-7367}, doi = {10.1016/j.catcom.2006.08.041}, author = {Choudhary, Vasant R. and Jana, Prabhas and Bhargava, Suresh Kumar} } @article { ISI:000249864300018, title = {Regio- and stereoselective synthesis of beta-amino alcohols over titanosilicate molecular sieves}, journal = {Applied Catalysis A-General}, volume = {330}, year = {2007}, month = {OCT}, pages = {145-151}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

A novel application of titanosilicate molecular sieves in the synthesis of P-amino alcohols via aminolysis of epoxides, at mild and solvent-free conditions, is reported, for the first time. A range of beta-amino alcohols with nearly 100\% regio- and stereoselectivity was produced over these reusable solid catalysts in high yields. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Aminolysis of epoxides, synthesis of beta-amino alcohols, Ti-MCM-41, titanosilicate molecular sieves}, issn = {0926-860X}, doi = {10.1016/j.apcata.2007.07.019}, author = {Satyarthi, Jitendra K. and Saikia, Lakshi and Srinivas, Darbha and Ratnasamy, P.} } @conference {42803, title = {Removal of AS(III) and AS (V) from contaminated water sources by sorption onto novel pei-attached poly(hipe) beads", paper presented at international conference on ?role of analytical chemistry in nuclear technology?}, booktitle = {Role of Analytical Chemistry in Nuclear Technology}, year = {2007}, month = {DEC}, address = {BARC, Mumbai, India}, author = {Ingavle, Ganesh C. and Tayal, Rajeev and Shaikh, Wasif Abdul Lateef and Chaudhari, Sanjeev and Chavan, Nayaku and Rajan, Chelanattukizhakkemadath Raman and Ponrathnam, Surendra} } @article {42612, title = {Rheology of surface granular flows}, journal = {Journal of Fluid Mechanics}, volume = {571}, year = {2007}, month = {JAN}, pages = {1-32}, type = {Article}, abstract = {

Surface granular flow, comprising granular material flowing on the surface of a heap of the same material, occurs in several industrial and natural systems. The rheology of such a flow was investigated by means of measurements of velocity and number-density profiles in a quasi-two-dimensional rotating cylinder, half-filled with a model granular material {\textendash} monosize spherical stainless-steel particles. The measurements were made at the centre of the cylinder, where the flow is fully developed, using streakline photography and image analysis. The stress profile was computed from the number-density profile using a force balance which takes into account wall friction. Mean-velocity and root-mean-square (r.m.s.)-velocity profiles are reported for different particle sizes and cylinder rotation speeds. The profiles for the mean velocity superimpose when distance is scaled by the particle diameter d and velocity by a characteristic shear rate and the particle diameter, where βm is the maximum dynamic angle of repose and βs is the static angle of repose. The maximum dynamic angle of repose is found to vary with the local flow rate. The scaling is also found to work for the r.m.s. velocity profiles. The mean velocity is found to decay exponentially with depth in the bed, with decay length λ = 1.1d. The r.m.s. velocity shows similar behaviour but with λ = 1.7d. The r.m.s. velocity profile shows two regimes: near the free surface the r.m.s. velocity is nearly constant and below a transition point it decays linearly with depth. The shear rate, obtained by numerical differentiation of the velocity profile, is not constant anywhere in the layer and has a maximum which occurs at the same depth as the transition in the r.m.s. velocity profile. Above the transition point the velocity distributions are Gaussian and below the transition point the velocity distributions gradually approach a Poisson distribution. The shear stress increases roughly linearly with depth. The variation in the apparent viscosity η with r.m.s. velocity u shows a relatively sharp transition at the shear-rate maximum, and in the region below this point the apparent viscosity η \~{} u-1.5. The measurements indicate that the flow comprises two layers: an upper low-viscosity layer with a nearly constant r.m.s. velocity and a lower layer of increasing viscosity with a decreasing r.m.s. velocity. The thickness of the upper layer depends on the local flow rate and is independent of particle diameter while the reverse is found to hold for the lower-layer thickness. The experimental data is compared with the predictions of three models for granular flow.

}, doi = {10.1017/S002211200600320X}, author = {Orpe, Ashish V. and Khakhar, Devang V.} } @article { ISI:000245142600008, title = {Rh(II)-catalyzed intramolecular N-H insertion of D-glucose-derived delta-amino alpha-diazo beta-ketoester: Synthesis of pyrrolidine iminosugars}, journal = {Synlett}, number = {4}, year = {2007}, month = {MAR}, pages = {559-562}, publisher = {GEORG THIEME VERLAG KG}, type = {Article}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The rhodium acetate catalyzed reaction of D-glucose-derived delta-amino alpha-diazo beta-ketoester allows a stereoselective beta-facial intramolecular N-H insertion reaction that leads to formation of the bicyclic pyrrolidinone ring skeleton in high yield. The sugar-substituted pyrrolidinone thus obtained was elaborated to allow the synthesis of promising glycosidase inhibitors, namely, 2,5-dideoxy2,5-imino-L-glycero-alpha-D-galactoheptitol and 2,5-dideoxy-2,5-imino-D-galactitol.

}, keywords = {alkaloids, azasugars, carbohydrates, N-H insertion, Pyrrolidines, rhodium carbenoid}, issn = {0936-5214}, doi = {10.1055/s-2007-970743}, author = {Vyavahare, Vinod P. and Chattopadhyay, Subrata and Puranik, Vedavati G. and Dhavale, Dilip D.} } @article { ISI:000250278300038, title = {Role of ionic diffusion in polymer gel mediated growth (PMG) technique for the synthesis of nanoparticulate fillers}, journal = {Materials Chemistry and Physics}, volume = {105}, number = {2-3}, year = {2007}, month = {OCT}, pages = {348-353}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Polymer mediated growth (PMG), which forms an important method for synthesis of nanoparticles, has one of the ions bound by polymer matrix while the other is allowed to diffuse and react to form desired compound. The exact role of ionic diffusion in the formation of nanoparticles has been investigated by taking specific case studies. Typically calcium carbonate, calcium phosphate and calcium sulfate have been formed in nano-size by PMG route using polyacrylamide gel. The extent of cross-linking of the polymer matrix in the formation of gel, affects the diffusivity of ions into polymer matrix and the size of particles formed. The rates of diffusion for different extents of cross-linking of polymer are estimated during the synthesis of nanoparticles using Fick{\textquoteright}s law. The inter-correlation between the particle size formation and the diffusion length has been clearly brought out in these studies. (c) 2007 Elsevier B.V. All rights reserved.

}, keywords = {ionic diffusion, nanoparticulate fillers, polymeric gels}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2007.04.071}, author = {Sonawane, Pradip S. and Biradar, Santoshkumar S. and Radhakrishnan, S. and Kulkarni, B. D.} } @article { ISI:000246492900025, title = {Rotary Cement Kiln Simulator (RoCKS): integrated modeling of pre-heater, calciner, kiln and clinker cooler}, journal = {Chemical Engineering Science}, volume = {62}, number = {9}, year = {2007}, month = {MAY}, pages = {2590-2607}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

This paper presents an integrated reaction engineering based mathematical model for clinker formation in cement industry. Separate models for pre-heater, calciner, rotary kiln and cooler were initially developed and coupled together to build an integrated simulator. Appropriate models for simulating gas-solid contact and heat transfer in pre-heaters were developed. Calciner was modeled by considering simultaneous combustion of coal particles and calcination of raw meal. Complex heat transfer and reactions (solid-solid, gas-solid and homogeneous reactions in gas phase) in rotary kiln were modeled using three sub-models coupled to each other. Solid-solid reactions in the bed region of the kiln were modeled using pseudo-homogeneous approximation. Melting of solids in the bed and formation of coating within the kiln were accounted. Clinker cooler was simulated by developing a two-dimensional model to capture cross-flow heat transfer between air and hot clinkers. The individual models were coupled with each other via mass and energy communication through common boundaries. The coupled model equations were solved iteratively. The model predictions agree well with the observations and experience from cement industry. The model was used to gain better understanding of influence of operating conditions on energy consumption in cement plant. Several ways for reducing energy consumption were computationally investigated. The integrated model, the developed software RoCKS (for Rotary Cement Kiln Simulator) and results presented here will be useful for enhancing our understanding and for enhancing the performance of clinker manufacturing. (C) 2007 Elsevier Ltd. All rights reserved.

}, keywords = {cement, energy consumption, reaction engineering model}, issn = {0009-2509}, doi = {10.1016/j.ces.2007.01.063}, author = {Mujumdar, Kaustubh S. and Ganesh, K. V. and Kulkarni, Sarita B. and Ranade, Vivek V.} } @article {42593, title = {Random and AB diblock copolymers of tricyclodecanemethanol urethane methacrylate with styrene: synthesis and morphology characterization}, journal = {Journal of Polymer Science Part A: Polymer Chemistry}, volume = {46}, year = {2008}, month = {DEC}, pages = {1278{\textendash}1288}, abstract = {

A monomer design having a bulky terminal tricyclodecane (TCD) unit linked via hydrogen bondable urethane to an ethyleneoxy methacrylate unit, and capable of generating three-dimensional honeycomb patterns upon solvent casting has been investigated. Random copolymers as well as a diblock copolymer Poly(Sty42-b-TCD18) of this monomer with styrene were prepared by free-radical polymerization route and atom transfer radical polymerization (ATRP) route. Morphology characterization was carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Particle size was measured by dynamic light scattering measurements (DLS). Irrespective of the wide differences in molecular weight and polydispersity index values, the random copolymers having TCD content \>30 mol \% were found to form microporous films upon solvent casting from a THF/water 9:1 solvent combination. The amount of TCD in the copolymer was found to have an influence on the pore size formed. The diblock copolymer formed microspheres \~{}200 nm in diameter. The thermal properties of all the polymers were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), and the copolymers were found to have good thermal stability. {\textcopyright} 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1278{\textendash}1288, 2008

}, doi = {10.1002/pola.22469}, author = {Deepak, V. D. and Asha, S. K.} } @article { ISI:000260561800007, title = {Rapid and high biodegradation of phenols catalyzed by Candida tropicalis NCIM 3556 cells}, journal = {Enzyme and Microbial Technology}, volume = {43}, number = {6}, year = {2008}, month = {NOV}, pages = {431-435}, publisher = {ELSEVIER SCIENCE INC}, address = {360 PARK AVE SOUTH, NEW YORK, NY 10010-1710 USA}, abstract = {

Cells of 19 yeast cultures, belonging to genus Candida were screened for biodegradation of phenol. The cultures procured from NCIM culture collection and were selected so as to contain a representative of varied strains of the species. These were grown in MGYP3 medium and tested for biodegradation of phenol. C. tropicalis (CT) nos. 3118, 3556 and C. lipolytica 3472 effectively degraded \>90\% 2 g l(-1) phenol. The C. tropicalis 3556 strain was selected for further studies as it metabolized \>95\% phenol in just 16 h as compared to the other two which took 48 h. The maximum substrate concentration that could be completely degraded was 2 g l(-1). A study of induction, of different concentration of phenol in the growth medium showed that toxicity to cell growth increased with increasing phenol levels in growth media. Biodegradation of phenol derivatives - o-cresol, m-cresol. 2,6-dimethyl phenol, alpha-naphthol, o-chlorophenol and p-nitrophenol, by the selected three strains indicated that the specificity of each culture varied for different substrate. (C) 2008 Elsevier Inc. All rights reserved.

}, keywords = {Biodegradation, Candida lipolytica, Candida tropicalis, phenol, Phenol derivatives}, issn = {0141-0229}, doi = {10.1016/j.enzmictec.2008.07.008}, author = {Varma, Rita J. and Gaikwad, Bhaskar G.} } @article { ISI:000257694300013, title = {Rapid extraction and separation of indium(III) with a high molecular weight amine}, journal = {Indian Journal of Chemical Technology}, volume = {15}, number = {3}, year = {2008}, month = {MAY}, pages = {291-297}, publisher = {NATL INST SCIENCE COMMUNICATION}, address = {DR K S KRISHNAN MARG, NEW DELHI 110 012, INDIA}, abstract = {

The liquid-liquid extraction of indium(III) from sodium succinate media using n-octylaniline in toluene as an extractant was studied. Quantitative extraction of indium(III) was observed in the range of 0.004-0.0075 M sodium succinate at pH 3.8-6.0 with 4\% n-octylaniline in toluene. Indium(III) was completely stripped from the metal loaded organic phase of the extractant with water and determined complexometrically. The stoichiometry of the extracted species was determined on the basis of;slope analysis. The extraction was found to proceed by a ion-pair mechanism with the extracted species being [RNH3+In(succinate)(2)(-)](org). Separation of indium(III) was carried out from some associated metals like Tl(I), Mg(II), Ni(II), Cu(II), Zn(II),. Cd(II), Hg(II), Pb(II), GC(IV), Sb(III), Bi(III). The selectivity of the extraction of indium(III) can also be achieved by use of a suitable masking agent for estimation and determination from the synthetic mixture corresponding to alloy to show the practical utility of the extractant.

}, keywords = {Indium(III), n-octylaniline, Separation, solvent extraction, succinate}, issn = {0971-457X}, author = {Shilmkar, T. N. and Kolekar, S. S. and Wadgaonkar, P. P. and Anuse, Mansing A.} } @article { ISI:000255421300007, title = {Rapid liquid-liquid extraction of thallium(III) from succinate media with 2-octylaminopyirdine in chloroform as the extractant}, journal = {Journal of the Serbian Chemical Society}, volume = {73}, number = {4}, year = {2008}, month = {JAN}, pages = {435-451}, publisher = {SERBIAN CHEMICAL SOC}, address = {KARNEGIJEVA 4, PO BOX 462, YU-11001 BELGRADE, YUGOSLAVIA}, abstract = {

A simple solvent extraction study of thallium(III) was conducted. Selective and quantitative extraction of thallium(III) by 2-octylaminopyridine (2-OAP) in chloroform occurred from aqueous sodium succinate medium (0.0075 M) at pH 3.0. Thallium(III) was back extracted with acetate buffer (pH 4.63). The effect of the concentration of succinate and 2-OAP, the role of various diluents, stripping agents, loading capacity of 2-OAP, equilibrium time and aqueous:organic volume ratio on the extraction of thallium(III) was studied. The stoichiometry of the extracted species was determined based on the slope analysis method and found to be 1: 2: 1 (metal: acid: extractant). The temperature dependence of the extraction equilibrium constant was also examined to estimate the apparent thermodynamic functions Delta H, Delta G and Delta S for the extraction reaction. The method is free from interference of a large number of cations and anions. The method was used for the selective extraction of thallium(III) from its binary mixture with Zn(II), Cd(II), Hg(II), Bi(ill), Pb(II), Se(IV), Te(IV), Sb(III), Ga(III), In(III), AI(III), TI(I) and Fe(III). The proposed method was applied to the synthetic mixtures and alloys. It is simple, selective, rapid and eco-friendly.

}, keywords = {2-OAP, liquid-liquid extraction, succinate media, Temperature effect, thallium(III)}, issn = {0352-5139}, doi = {10.2298/JSCO804435M}, author = {Mahamuni, Sandip V. and Wadgaonkar, Prakash P. and Anuse, Mansing A.} } @article { ISI:000253767100014, title = {Rapid phase-controlled microwave synthesis of nanostructured hierarchical tetragonal and cubic beta-In2S3 dandelion flowers}, journal = {Chemical Physics Letters}, volume = {452}, number = {4-6}, year = {2008}, month = {FEB}, pages = {301-305}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Phase controlled synthesis of hierarchical nanostructured beta-In2S3 dandelion flowers is realized by a rapid microwave solvothermal process using indium metal, nitric acid and thiourea as precursors. The tetragonal and cubic phases of the compound have been successfully and separately stabilized in the same type of dandelion morphology by using aqueous-mediated and methanol-mediated synthesis, respectively. The possible mechanism responsible for phase control is discussed. Optical properties of the flowers as well as their hydrogen generation capability by photodecomposition of H2S under visible light are also reported. (c) 2007 Elsevier B.V. All rights reserved.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2007.12.048}, author = {Naik, S. D. and Jagadale, Tushar C. and Apte, S. K. and Sonawane, S. and Kulkarni, M. V. and Patil, S. I. and Ogale, Satishchandra B. and Kale, B. B.} } @article { ISI:000253366100001, title = {Rare earth metal triflates promoted diels-alder reactions in ionic liquids}, journal = {Applied Catalysis A-General}, volume = {335}, number = {1}, year = {2008}, month = {FEB}, pages = {1-6}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Rare earth metal triflates, when used with ionic liquids can promote Diels-Alder reactions carried out with different dienes and dienophiles suggesting an enhancement in the catalytic power of the triflates in ionic liquids. It is possible to recover and reuse the ionic liquid phase with triflates to give comparable yields and stereoselectivities even after six cycles. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Diels-Alder reactions, ionic liquids, rare earth metal triflates}, issn = {0926-860X}, doi = {10.1016/j.apcata.2007.10.026}, author = {Sarma, Diganta and Kumar, Anil} } @article { ISI:000255455300004, title = {Reaction kinetics of liquid phase air oxidation of p-cresol to p-hydroxybenzaldehyde}, journal = {Applied Catalysis A-General}, volume = {339}, number = {1}, year = {2008}, month = {APR}, pages = {28-35}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The kinetics of liquid phase oxidation of p-cresol to p-hydroxybenzaldehyde has been investigated using insoluble cobalt oxide (CO3O4) catalyst at oxygen partial pressures in the range 0.1-1.5 MPa, reaction temperatures 333-393 K, p-cresol concentrations 0.49-1.53 kmol/m(3) and catalyst loadings 0.38-3.03 kg/m(3). The effects of oxygen partial pressure, reaction temperature, p-cresol concentration and catalyst loading on the initial rate of reaction have been studied. The initial rate varied linearly with catalyst loading up to 1.5 kg/m(3) beyond which it was independent of the catalyst loading while first-order dependence was observed with variation in oxygen partial pressure. A rate expression has been proposed considering Langmuir-Hinshelwood (LH) type mechanism, based on the initial rate data. A batch reactor model was also developed based on the kinetics studied and the concentration time profile predicted by the model was in good agreement with the experimental data. The activation energy for the liquid phase oxidation of p-cresol was found to be 39.6 kJ/mol. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Co3O4, kinetics, p-cresol oxidation, XPS, XRD}, issn = {0926-860X}, doi = {10.1016/j.apcata.2008.01.006}, author = {Kshirsagar, V. S. and Nadgeri, J. M. and Tayade, P. R. and Rode, C. V.} } @article {42460, title = {Reaction of huisgen zwitterion with diaryl ketones leading to the facile synthesis of mono- and bis(alkoxycarbonyl)hydrazones}, journal = {Synthesis-Stuttgart}, year = {2008}, month = {MAR}, pages = {1078-1084}, abstract = {

The Huisgen zwitterion, generated from triphenylphosphine and dialkyl azodicarboxylates, afforded upon reaction with diaryl ketones both mono- and bis(alkoxycarbonyl)hydrazones, depending on the reaction conditions.

}, doi = {10.1055/s-2008-1032125}, author = {Nair, Vijay and Mathew, Smitha C. and Biju, Akkattu T. and Eringathodi, Suresh} } @article { ISI:000259602400108, title = {Recovery of ammonical salts from mother liquid of 2-methyl-5-nitroimidazole}, journal = {Asian Journal of Chemistry}, volume = {20}, number = {4}, year = {2008}, month = {APR}, pages = {3287-3288}, publisher = {ASIAN JOURNAL OF CHEMISTRY}, address = {11/100 RAJENDRA NAGAR, SECTOR 3,, SAHIBABAD 201 005, GHAZIABAD, INDIA}, abstract = {

An attempt have been made to recover the ammonical salt (ammonium sulphate and ammonium nitrate) from the mother liquid of 2-methyl-5-nitroimidazole successfully.

}, keywords = {2-methyl-5-nitroimidazole, ammonium nitrate, ammonium sulphate, Recovery}, issn = {0970-7077}, author = {Dongare, Mohan K. and Rode, C. V. and Chandorkar, J. G.} } @article {42583, title = {Resistive switching in rose bengal and other xanthene molecules is a molecular phenomenon}, journal = {Organic Electronics}, volume = {9}, year = {2008}, month = {FEB}, pages = {495{\textendash}500}, abstract = {

There has been a debate on the mechanism of resistive switching in Rose Bengal and other Xanthene class molecules. While some authors proposed that the switching was due to an oxide layer at the Rose Bengal/Aluminum interface, some inferred the switching as an extrinsic effect like filament formation. We show results from Rose Bengal and other Xanthene class molecules on doped Si. Conductance switching in such monolayers induced by Pt/Ir tip of a scanning tunneling microscope (STM) in a non-contact mode shows that resistive switching in these molecules, initially reported by us in 2003 (in thin films), is indeed a molecular phenomenon.

}, doi = {10.1016/j.orgel.2008.02.013}, author = {Rath, Arup Kumar and Pal, Amlan J.} } @article { ISI:000255774700006, title = {Rigid bicyclo[3.3.0]octane (octahydropentalene): a heavily constrained novel aliphatic template for molecular self-assembly}, journal = {Tetrahedron Letters}, volume = {49}, number = {19}, year = {2008}, month = {MAY}, pages = {3056-3059}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

This Letter reports the utility of a heavily constrained cis-fused bicyclo[3.3.0]octane (octahydropentalene) aliphatic template for effecting molecular self-assembly. An attractive feature of this system is its heavily constrained alicyclic backbone that would allow for the exploration of self-assembling systems with conformationally ordered features. (C) 2008 Elsevier Ltd. All rights reserved.

}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2008.03.062}, author = {Kendhale, Amol M. and Gonnade, Rajesh G. and Rajamohanan, P. R. and Sanjayan, Gangadhar J.} } @article { ISI:000261767400044, title = {Role of solvent molecules as a trigger for the crystal phase transition of syndiotactic polystyrene/solvent complex}, journal = {Macromolecules}, volume = {41}, number = {24}, year = {2008}, month = {DEC}, pages = {9814-9818}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The phase transitions occurring in the syndiotactic polystyrene-norbornadiene complex were investigated by simultaneous measurements of wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). To understand the effect of norbornadiene molecules on the phase-transition behavior, the delta form samples with different contents of norbornadiene were prepared. By heating these samples, we found that the delta-to-gamma transition occurred well below 100 degrees C in a broad temperature range, and the onset of the transition temperature depended on the content of norbornadiene included in the starting sample. The sample without norbornadiene molecules showed the delta-to-gamma transition to be above 100 degrees C. Upon further heating, the gamma form transformed into a mixture of alpha and beta forms in the presence of norbornadiene molecules, whereas the sample without norbornadiene transformed into only the alpha form. In this way, it has been found that the solvent molecules, which are not completely evaporated from the sample but are transiently trapped in the amorphous region because of the slow diffusion, have a significant role in facilitating the phase transitions as well as the transition temperatures in the crystalline region. On the basis of WAXD and DSC results, a phase-transition model has been reasonably constructed.

}, issn = {0024-9297}, doi = {10.1021/ma801742p}, author = {Gowd, E. Bhoje and Tashiro, Kohji and Ramesh, C.} } @article { ISI:000258037300073, title = {RuO(2) doped SnO(2) nanobipyramids on Si (100) as a field emitter}, journal = {Thin Solid Films}, volume = {516}, number = {18}, year = {2008}, month = {JUL}, pages = {6388-6391}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Thin films of RuO(2): SnO(2) nanobipyramids have been grown on silicon (100) flat substrates, and their field emission behavior has been investigated. The field emission experiments have been performed in parallel plate configuration. In this experiment, the onset field for 0. 1 gA/ cm 2 current density has been found to be 0.2 V/mu m. The Fowler-Nordheim plot shows non-linear nature typical that of a semiconductor. The field enhancement factor has been estimated to be 35,600 cm(-1), indicating that the field emission originates from the nanometric features of the emitter. The current stability recorded at a preset value of I tA is observed to be good. Our field emission results on RuO(2): SnO(2) nanobipyramids indicate that, RuO(2): SnO(2) nanobipyramids are a potential candidate for futuristic field emission based devices. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {doped semiconductor, field emitter, field enhancement factor, ruthenium oxide, tin oxide}, issn = {0040-6090}, doi = {10.1016/j.tsf.2007.12.160}, author = {Bhise, Ashok B. and Late, Dattatray J. and Ramgir, Niranjan S. and More, Mahendra A. and Mulla, Imtiaz S. and Pillai, Vijayamohanan K. and Joag, Dilip S.} } @article { ISI:000260452200009, title = {[Ru(salen)(NO)] complex encapsulated in mesoporous SBA-16 as catalyst for hydrogenation of ketones}, journal = {Catalysis Communications}, volume = {10}, number = {1}, year = {2008}, month = {OCT}, pages = {45-48}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

SBA-16 mesoporous silica with cubic lm3m structure was synthesized using Pluronic F127 poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer (EO106PO70EO106) and it blends with Pluronic P123 triblock copolymer (EO20PO70EO20) as supramolecular templates. The resulting material was used for encapsulating [Ru(salen)(NO)] complex and used in the hydrogenation of ketones to the corresponding alcohols. The pore entrance size of SBA-16 was precisely tailored by silylation with diphenyldichlorosilane to trap [Ru(salen)(NO)] complex in the cage of SBA-16. Small angle XRD, N-2 sorption measurements, UV-Vis and FT-IR analysis evidences the structural integrity of mesoporous silica as well as the complex. (C) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Encapsulation, Hydrogenation, Ketones, SBA-16, [Ru(salen)(NO)] complex}, issn = {1566-7367}, doi = {10.1016/j.catcom.2008.07.029}, author = {Bordoloi, Ankur and Amrute, Amol P. and Halligudi, Shivaraj B.} } @article {42455, title = {Reactions of morita-baylis-hillman acetates with huisgen zwitterions: a novel strategy for the synthesis of ?-amino acid derivatives}, journal = {Synthesis}, year = {2009}, month = {APR}, pages = {1829{\textendash}1833}, abstract = {

The reaction of Huisgen Zwitterion with Morita{\textendash}Baylis{\textendash} Hillman acetates afforded b-amino acid derivatives.

}, keywords = {b-amino acid, Huisgen zwitterion, Morita{\textendash}Baylis{\textendash}Hillman acetate}, doi = {10.1055/s-0028-1088063}, author = {Jose, Anu and Paul, Rony Rajan and Mohan, Resmi and Mathew, Smitha C. and Biju, Akkattu T. and Eringathodi, Suresh and Nair, Vijay} } @article { ISI:000264247300034, title = {Reactive extrusion of poly(L-Lactic Acid) with glycidol}, journal = {Journal of Applied Polymer Science}, volume = {112}, number = {3}, year = {2009}, month = {MAY}, pages = {1391-1398}, publisher = {JOHN WILEY \& SONS INC}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Glycidol modified polylactic acid (PLLA) polymers have been prepared by reactive extrusion. Influences of residence time and the concentration of glycidol on the extent of reaction with different weight average molecular weight (45,000, 65,000, and 100,000) PLLA{\textquoteright}s were studied. Structure-property relationship has been established by measuring molecular, mesoscopic, and macroscopic properties. Under reactive extrusion conditions glycidol reacted with the end groups of PLLA to initiate chain extension. Low-molecular weight PLLA reacted with glycidol faster than the medium molecular weight PLLA, whereas high-molecular weight PLLA did not show significant reactions. The glass transition temperature, melting temperature, crystallization temperature, and heat of fusion were measured for unmodified and modified PLLA{\textquoteright}s. Chain extended PLLA had higher T(g) and T(m) than the unmodified samples. Time sweep rheological experiments were performed to test the melt stability of PLLA. Chain extended PLLA{\textquoteright}s were found to retain viscoelastic properties for much longer time than the unreacted samples. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 1391-1398, 2009

}, keywords = {biodegradable, reactive extrusion, Rheology, structure-property relations, Thermal properties}, issn = {0021-8995}, doi = {10.1002/app.29581}, author = {Deenadayalan, E. and Lele, Ashish K. and Balasubramanian, M.} } @article { ISI:000266545500027, title = {Real-time nanomechanical and topographical mapping on live bacterial cells-brevibacterium casei under stress due to their exposure to Co2+ Ions during microbial synthesis of Co3O4 nanoparticles}, journal = {Journal of Physical Chemistry B}, volume = {113}, number = {22}, year = {2009}, month = {JUN}, pages = {7927-7933}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The study of elastic properties of microbial and mammalian cells using atomic force microscopy, with force-sensitivity as high as pico-Newtons and spatial resolution of a few nanometers, is proving to be a great tool for the real-time observation of the effects of drugs, biomolecules, metal ions, and nanoparticles on cell physiology in their natural environment. It has been shown that the Young{\textquoteright}s modulus of the cell surfaces is extremely sensitive to the surrounding environment. Recently, a broad array of microbes have been used successfully to synthesize nanocrystals of several metal and metal oxides in a controlled manner at room temperature after exposing them to various metal ion precursors. However, so far there is no report on the fate of their elastic properties and cell topography etc. during and after their exposure to the metal ions during the microbial synthesis of nanomaterials. Additionally, this information is also found to be extremely relevant to areas such as bioremediation, bioleaching, and biomineralization, where it is important to study the direct influence on the cell physiology in the presence of metal ions. Here, we report, for the first time, the use of AFM force-distance curves on live cells, to directly monitor (in real time) the changes in the surface-topography, surface-adhesion, indentation-depth, and Young{\textquoteright}s modulus of a metal-tolerant marine bacterium, Brevibacterium casei, isolated from the coast of the Arabian Sea, after its exposure to the Co2+ ions during the process of biosynthesis of nanoparticles. We earlier reported that this bacterium is capable of using the cobalt acetate as a precursor to synthesize protein-functionalized Co3O4 nanoparticles with very high crystallinity. Our study indicates a significant change in the morphology as well as elastic and adhesive properties of the Brevibacterium casei, where we found an increase in the adhesive properties and the indentation depth of the bacterial surfaces and a decrease in the cell stiffness after several hours of exposure to the cobalt acetate. We have discussed both qualitative and quantitative analysis of the force-spectroscopy data in detail.

}, issn = {1520-6106}, doi = {10.1021/jp902698n}, author = {Kumar, Umesh and Vivekanand, K. and Poddar, Pankaj} } @article { ISI:000269883300021, title = {Recyclable amberlyst-70 as a catalyst for biginelli reaction: an efficient one-pot green protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones}, journal = {Catalysis Letters}, volume = {131}, number = {3-4}, year = {2009}, month = {SEP}, pages = {469-473}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

An environmentally benign aqueous protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones using Amberlyst-70 as a recyclable catalyst has been developed. The use of resinous, nontoxic, thermally stable and inexpensive Amberlyst-70, as a recyclable heterogeneous catalyst, makes the process simple with negligible chemical waste. Thus renders this method an environmentally acceptable synthetic tool for Biginelli reaction.

}, keywords = {Amberlyst-70, Biginelli reaction, green chemistry, heterogeneous catalysis}, issn = {1011-372X}, doi = {10.1007/s10562-009-9896-z}, author = {Chandak, Hemant S. and Lad, Nitin P. and Upare, Pravin P.} } @article { ISI:000264437500011, title = {Redox and selective oxidation properties of Mn complexes grafted on SBA-15}, journal = {Catalysis Today}, volume = {141}, number = {1-2}, year = {2009}, note = {18th National Symposium and Indo-US Seminar on Catalysis, Indian Inst Petroleum, Dehradun, INDIA, APR 16-18, 2007}, month = {MAR}, pages = {66-71}, publisher = {Catalysis Soc India; Petrotech Soc; Indo US Sci \& Technol Forum}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Manganese complexes of 5,10,15,20-tetraphenylporphyrin (Mn(TPP)Cl) were grafted on SBA-15 functionalized with propyl-amine, -thiol and -sulfonic acid groups. The acido-basic properties of the support influenced the oxidation state, redox behavior and selective oxidation properties of the Mn complexes. Acidic supports (SBA-15-pr-SH and SBA-15-pr-SO(3)H) promoted the reduction of Mn ions in Mn-TPP complexes from 3+ to 2+ oxidation state. A similar behavior was found also when Mn(Salen)Cl complexes were immobilized on those supports. However, the extent of such facile reduction was more in the case of Mn-TPP than in Mn-Salen complexes. The former exhibited superior catalytic activity (turnover frequency) than the latter-type Mn complexes in regio-, stereo- and chemoselective oxidation of R-(+)-limonene with molecular oxygen (1 atm) at ambient temperatures. The catalytic oxidation activity correlates with the redox behavior of the grafted Mn complexes. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {Grafted manganese complexes, Mn(Salen)Cl, Mn(TPP)Cl, Organo-functionalized SBA-15, Redox behavior of Mn, Selective oxidation of limonene}, issn = {0920-5861}, doi = {10.1016/j.cattod.2008.03.014}, author = {Saikia, Lakshi and Srinivas, D.} } @article { ISI:000264206200011, title = {Regioselective O-acylation of myo-inositol 1,3,5-orthoesters: dependence of regioselectivity on the stoichiometry of the base}, journal = {Tetrahedron}, volume = {65}, number = {13}, year = {2009}, month = {MAR}, pages = {2703-2710}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A metal mediated unusual 1-3 acyl migration from C4-O to C2-OH of myo-inositol 1,3,5-orthoformate was observed during the alkylation of racemic 4-O-benzoyl-myo-inositol 1,3,5-orthoformate. This has been exploited for the selective esterification of either the C4(6)-OH or the C2-OH of myo-inositol by varying the amount of the base used. While the use of 1 equiv of the base (sodium hydride or potassium tert-butoxide) for the acylation of myo-inositol orthoesters gives the corresponding C4-ester exclusively, the use of two or more equivalents of base for the same reaction gives the C2-ester exclusively. The relatively higher stability of the alkoxide of racemic 2-O-acyl-myo-inositol 1,3,5-orthoester as compared to the alkoxide of 4-O-acyl-myo-inositol 1,3,5-orthoester is suggested to be responsible for the observed isomerization. (c) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Acylation, Cyclitol, Inositol, Orthoester, Regioselectivity, transesterification}, issn = {0040-4020}, doi = {10.1016/j.tet.2009.01.060}, author = {Sureshan, Kana M. and Devaraj, Subramanian and Shashidhar, Mysore S.} } @article { ISI:000267728000002, title = {Relative reactivity of hydroxyl groups in inositol derivatives: role of metal ion chelation}, journal = {Carbohydrate Research}, volume = {344}, number = {10}, year = {2009}, month = {JUL}, pages = {1159-1166}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

O-Alkylation of myo-inositol derivatives containing more than one hydroxyl group via their alkali metal alkoxides (sodium or lithium) preferentially occurs at a hydroxyl group having a vicinal cis-oxygen atom. In general the observed selectivity is relatively higher for lithium alkoxides than for the corresponding sodium alkoxide. The observed regioselectivity is also dependent on other factors such as the solvent and reaction temperature. A perusal of the results presented in this article as well as those available in the literature suggests that chelation of metal ions by inositol derivatives plays a significant role in the observed regioselectivity. Steric factors associated with the axial or equatorial disposition of the reacting hydroxyl groups do not contribute much to the outcome of these O-alkylation reactions. These results could serve as guidelines in planning synthetic strategies involving other carbohydrates and their derivatives. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Carbohydrate, Chelation, Cyclitol, Inositol, Protecting group}, issn = {0008-6215}, doi = {10.1016/j.carres.2009.04.007}, author = {Devaraj, Subramanian and Jagdhane, Rajendra C. and Shashidhar, Mysore S.} } @article { ISI:000268401300001, title = {Responses of midgut amylases of Helicoverpa armigera to feeding on various host plants}, journal = {Journal of Insect Physiology}, volume = {55}, number = {8}, year = {2009}, month = {AUG}, pages = {663-670}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Midgut digestive amylases and proteinases of Helicoverpa armigera, a polyphagous and devastating insect pest of economic importance have been studied. We also identified the potential of a sorghum amylase inhibitor against H. armigera midgut amylase. Amylase activities were detected in all the larval instars, pupae, moths and eggs; early instars had lower amylase levels which steadily increased up to the sixth larval instar. Qualitative and quantitative differences in midgut amylases of H. amigera upon feeding on natural and artificial diets were evident. Natural diets were categorized as one or more members of legumes, vegetables, flowers and cereals belonging to different plant families. Amylase activity and isoform patterns varied depending on host plant and/or artificial diet. Artificial diet-fed H. armigera larvae had comparatively high amylase activity and several unique amylase isoforms. Correlation of amylase and proteinase activities of H. armigera with the protein and carbohydrate content of various diets suggested that H. armigera regulates the levels of these digestive enzymes in response to macromolecular composition of the diet. These adjustments in the digestive enzymes of H. armigera may be to obtain better nourishment from the diet and avoid toxicity due to nutritional imbalance. H. armigera, a generalist feeder experiences a great degree of nutritional heterogeneity in its diet. An investigation of the differences in enzyme levels in response to macronutrient balance and imbalance highlight their importance in insect nutrition. (C) 2009 Elsevier Ltd. All rights reserved.

}, keywords = {Amylase inhibitors, Diet, Helicoverpa armigera larvae, Midgut amylase, Proteinases}, issn = {0022-1910}, doi = {10.1016/j.jinsphys.2009.05.004}, author = {Kotkar, Hemlata M. and Sarate, Priya J. and Tamhane, Vaijayanti A. and Gupta, Vidya S. and Giri, Ashok P.} } @article {42778, title = {Responsive assemblies and microgel-based materials}, journal = {Chemical Society Reviews}, volume = {38}, year = {2009}, month = {2009}, pages = {865-874}, author = {Lyon, L. Andrew and Meng, Z. and Singh, Neetu and Sorrell, C. D. and John, A.} } @article { ISI:000266525900010, title = {Review on lazy learning regressors and their applications in QSAR}, journal = {Combinatorial Chemistry \& High Throughput Screening}, volume = {12}, number = {4}, year = {2009}, month = {MAY}, pages = {440-450}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y26, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Building accurate quantitative structure-activity relationships (QSAR) is important in drug design, environmental modeling, toxicology, and chemical property prediction. QSAR methods can be utilized to solve mainly two types of problems viz., pattern recognition, (or classification) where output is discrete (i.e. class information), e. g., active or non-active molecule, binding or non-binding molecule etc., and function approximation, (i.e. regression) where the output is continuous (e.g., actual activity prediction). The present review deals with the second type of problem (regression) with specific attention to one of the most effective machine learning procedures, viz. lazy learning. The methodologies of the algorithm along with the relevant technical information are discussed in detail. We also present three real life case studies to briefly outline the typical characteristics of the modeling formalism.

}, keywords = {classification, lazy learning, machine learning, Quantitative structure activity relationship (QSAR), regression}, issn = {1386-2073}, author = {Kulkarni, Abhijit J. and Jayaraman, Valadi K. and Kulkarni, Bhaskar D.} } @article { ISI:000265529700071, title = {Revisit to carbon monoxide oxidation on Pd(111) surfaces}, journal = {Journal of Physical Chemistry C}, volume = {113}, number = {17}, year = {2009}, month = {APR}, pages = {7385-7397}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Carbon monoxide (CO) oxidation on Pd(111) surfaces has been studied by molecular beam methods with mixed molecular beams (CO + O(2)) between 400 and 900 K and a CO:O(2) ratio of 7:1 to 1:10. A new aspect of the above reaction observed in the transient kinetics regime is the evidence for oxygen diffusion into Pd(111) subsurface layers and its significant influence toward CO oxidation at high temperatures (\>= 600 K). An overall influence of subsurface oxygen on the kinetics of the CO oxidation reaction is addressed. Interesting information derived from the above studies is the necessity to fill up the subsurface layers with oxygen atoms to a threshold coverage (theta(Osub)), above which the reactive CO adsorption occurs on the surface with subsequent CO(2) production. The above observation Was demonstrated with CO-rich reactant compositions (CO + O(2)) above 600 K via instant oxygen adsorption on Pd surfaces; however, onset of CO adsorption as well as CO(2) production occurs after a time delay. theta(Osub) and the time delay in CO adsorption (and CO(2) production) increase with increasing temperature and with CO-rich compositions. theta(Osub) was measured up to 0.3 monlayer (ML) between 500 and 850 K before the onset of CO adsorption; however, theta(Osub) increases from an insignificant value at \<500 K to 0.4 ML at 900 K with a pure O(2) beam. Onset of CO adsorption with a significant sticking coefficient on the Pd surfaces, that is, covered with significant subsurface oxygen, underscores a change in the electronic state of Pd surfaces toward mildly oxidized (or Pd(delta+)), and an electronic decoupling occurs between the bulk and the surface. The jellium model is invoked to demonstrate the changes observed. A similar observation with polycrystalline Pd surfaces suggests the defect sites is one of the channels for oxygen diffusion into subsurfaces. Initial sticking coefficient (s(0)) measurements demonstrate that there is no significant competition between CO and O(2) adsorption from the CO + O(2) mixture between 400 and 600 K, and indeed they are largely independent of each other. The maximum steady-state CO(2) formation rate was observed for a 1:1 CO/O(2) beam composition between 500 and 550 K. However, with a significant theta(Osub) the rate of CO(2) Production in the steady state is considerable even at high temperatures (700-850 K), and a broadening of the active CO oxidation regime to high temperature is observed with O(2)-rich compositions.

}, issn = {1932-7447}, doi = {10.1021/jp900890w}, author = {Nagarajan, Sankaranarayanan and Thirunavukkarasu, Kandasamy and Gopinath, Chinnakonda S.} } @article { ISI:000271538700006, title = {Rhodotorula aurantiaca penicillin V acylase: active site characterization and fluorometric studies}, journal = {Journal of Photochemistry and Photobiology B-Biology}, volume = {97}, number = {2}, year = {2009}, month = {NOV}, pages = {109-116}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Penicillin V acylase (PVA), a member of newly evolved Ntn-hydrolase superfamily, is a pharmaceutically important enzyme to produce 6-aminopenicillanic acid. Active site characterization of recently purified monomeric PVA from Rhodotorula aurantiaca (Ra-PVA), the yeast source, showed the involvement of serine and tryptophan in the enzyme activity. Modification of the protein with serine and tryptophan specific reagents such as PMSF and NBS showed partial loss of PVA activity and substrate protection. Ra-PVA was found to be a multi-tryptophan protein exhibiting one tryptophan, in native and, four in its denatured condition. Various solute quenchers and substrate were used to probe the microenvironment of the putative reactive tryptophan through fluorescence quenching. The results obtained indicate that the tryptophan residues of Ra-PVA were largely buried in hydrophobic core of the protein matrix. Quenching of the fluorescence by acrylamide was collisional. Acrylamide was the most effective quencher amongst all the used quenchers, which quenched 71.6\% of the total intrinsic fluorescence of the protein, at a very less final concentration of 0.1 M. Surface tryptophan residues were found to have predominantly more electropositively charged amino acids around them, however differentially accessible for ionic quenchers. Denaturation led to shift lambda(max) from 336, in native state, to 357 nm and more exposed to the solvent, consequently increase in fluorescence quenching with all quenchers. This is an attempt towards the conformational studies of Ra-PVA. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {active site residues, Fluorometric studies, Penicillin V acylase, Rhodotorula aurantiaca}, issn = {1011-1344}, author = {Kumar, Atul and Gowda, Nagaraj M. and Gaikwad, Sushama M. and Pundle, Archana} } @article { ISI:000264437500028, title = {Ru(II)-Chiral (1R,2S)-(+)-cis-1-amino-2-indanol immobilized over SBA-15 for asymmetric transfer hydrogenation reaction of prochiral ketones}, journal = {Catalysis Today}, volume = {141}, number = {1-2}, year = {2009}, note = {18th National Symposium and Indo-US Seminar on Catalysis, Indian Inst Petroleum, Dehradun, INDIA, APR 16-18, 2007}, month = {MAR}, pages = {161-167}, publisher = {Catalysis Soc India; Petrotech Soc; Indo US Sci \& Technol Forum}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Mesoporous SBA-15 (Santa Barbara University at California) has been synthesized and functionalized with (4-chloromethyl)phenyltriethoxysilane, there after the surface silanols groups were passivated by dimethoxydimethylsilane (MeO(2)Me(2)Si) [Bz-SBA-15]. Further (1R,2S)-(+)-cis-1-amino-2-indanol [AIL] has been immobilized over functionalized SBA-15 (BzAIL-SBA-15). The heterogeneous catalysts were synthesized by complexation of BzAIL-SBA-15 by [RuCl(2)(benzene)](2) and [RuCl(2)(p-cymene)](2) in 2-propanol at reflux condition designated as Ru-Bn-BzAIL-SBA-15 (Ru-1) and Ru-Cy-BzAIL-SBA-15 (Ru-2). The synthesized materials have been characterized by small angle X-ray diffraction spectroscopy (SAXS), N(2) adsorption-desorption isotherms, Fourier Transformed-Infra-red (FT-IR) spectroscopy, Transmission Electron Microscopy (TEM), intensively Coupled plasma atomic emission spectroscopy (ICP-AES), Diffuse reflectance UV-vis and (13)C CP MAS NMR analysis. Further the synthesized and characterized materials (Ru-1 and Ru-2) have been successfully applied in the asymmetric transfer hydrogenation (ATH) reaction of simple prochiral ketones, which gave a yield of 56\% and 18\% and enantiomeric excess (ee) values of 62\% and 77\% for Ru-1 and Ru-2, respectively, after 1 h for acetophenone. The reusability studies showed approximately the same enantiomeric excess value at lower conversions. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {(1R, 2S)-(+)-Cis-1-amino-2-indanol, Asymmetric transfer hydrogenation, Chiral amino alcohols, Mesoporous molecular sieve, Prochiral ketones, SBA-15}, issn = {0920-5861}, doi = {10.1016/j.cattod.2008.04.003}, author = {Parambadath, Surendran and Singh, A. P.} } @article { ISI:000284238000028, title = {Rapid generation of hierarchical nanoarchitectures of CdS via facile microwave assisted hydrothermal/semi-solvothermal route}, journal = {International Journal of Nanotechnology}, volume = {7}, number = {9-12, SI}, year = {2010}, month = {DEC}, pages = {1120-1130}, publisher = {INDERSCIENCE ENTERPRISES LTD}, address = {WORLD TRADE CENTER BLDG, 29 ROUTE DE PRE-BOIS, CASE POSTALE 896, CH-1215 GENEVA, SWITZERLAND}, abstract = {

1-D nanorod bundles as well as sea urchin and starfish like hierarchical morphological nanoarchitectures of CdS have been synthesised using a facile microwave assisted hydrothermal/semi-solvothermal technique. Observation of interesting regular/irregular pine-tree like secondary growth over these hierarchical nanoarchitectures is an important aspect of this work. Cadmium acetate and thiourea were used as precursor materials and were dissolved in solution containing mixture of diethylene triamine (DETA) and deionised water (DIW) in different volume ratios prior to subjecting the resultant solution to microwave radiation of 300 W at a reaction time of 10 min and temperature of 140 degrees C. XRD revealed formation of hexagonal CdS with strong (002) preferred orientation (c-axis orientation). Morphology dependent optical properties are studied using room temperature photoluminescence spectroscopy. We feel such secondary growth will be highly favourable in determining the non-linear properties of optoelectronic devices fabricated using such novel hierarchical nanoarchitectures.

}, keywords = {CdS, hierarchical nanoarchitectures, Microwave, Nanorods, secondary growth, solvothermal synthesis}, issn = {1475-7435}, author = {Shinde, Manish D. and Pawar, Amol U. and Sreeja, V. and Rane, Sunit and Potdar, Hari S. and Amalnerkar, Dinesh P.} } @article { ISI:000274490400085, title = {Reductive dechlorination of gamma-hexachlorocyclohexane using Fe-Pd bimetallic nanoparticles}, journal = {Journal of Hazardous Materials}, volume = {175}, number = {1-3}, year = {2010}, month = {MAR}, pages = {680-687}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Nanoscale Fe-Pd bimetallic particles were synthesized and used for degradation of lindane (gamma-hexachlorocyclohexane) in aqueous solution. Batch studies showed that 5 mg/Lof lindane was completely dechlorinated within 5 min at a catalyst loading of 0.5 g/L and the degradation process followed first-order kinetics. GC-MS analysis in corroboration with GC-ECD results showed the presence of cyclohexane as the final degradation product. The proposed mechanism for the reductive dechlorination of lindane involves Fe corrosion-induced hydrogen atom transfer from the Pd Surface. The enhanced degradation efficiency of Fe-Pd nanoparticles is attributed to: (1) high specific surface area of the nanoscale metal particles (60 m(2)/g), manyfold greater that of commercial grade micro- or milli-scale iron particles (similar to 1.6 m(2)/g); and, (2) increased catalytic reactivity due to the presence of I{\textquoteright}d on the Surface. Recycling and column studies showed that these nanoparticles exhibit efficient and sustained catalytic activity. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Bimetallic, Cyclohexane, Degradation, kinetics, Lindane, Nanoparticles}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2009.10.063}, author = {Nagpal, Varima and Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000284533700013, title = {Regiospecific azidoiodination of alkenes with sodium periodate, potassium iodide, and sodium azide: a high-yield synthesis of beta-iodoazides}, journal = {Synthesis-Stuttgart}, number = {22}, year = {2010}, month = {NOV}, pages = {3879-3882}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

The combination of sodium periodate, potassium iodide, and sodium azide has been found to be an efficient, simple, and inexpensive reagent system for azidoiodination of alkenes. The regiospecific 1,2-azidoiodination proceeds in an anti-Markovnikov fashion to produce beta-iodoazides in excellent yields.

}, keywords = {alkenes, azides, azidoiodination, beta-iodoazides, regio-specific}, issn = {0039-7881}, doi = {10.1055/s-0030-1258250}, author = {Chouthaiwale, Pandurang V. and Karabal, Pratibha U. and Suryavanshi, Gurunath and Sudalai, Arumugam} } @article { ISI:000278832400011, title = {Regiospecific oxyhalogenation of aromatics over SBA-15-supported nanoparticle group IV-VI metal oxides}, journal = {Catalysis Letters}, volume = {137}, number = {3-4}, year = {2010}, month = {JUL}, pages = {190-201}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

TiO(x), VO(x), MoO(x) and WO(x) supported on SBA-15 exhibit efficient catalytic activity for oxyhalogenation of aromatics with the H(2)O(2)-halide ion system. Unlike the hitherto known solid catalysts, these reusable catalysts yield the para-halogenated product with 100\% selectivity at 298 K and moderate acidic pH (3-5). The catalytic activity was enhanced by five orders of magnitude when supported on SBA-15.

}, keywords = {Haloperoxidase activity, Ordered mesoporous silica, Oxyhalogenation of aromatics, SBA-15, Supported metal oxides}, issn = {1011-372X}, doi = {10.1007/s10562-010-0350-z}, author = {Saikia, Lakshi and Rajesh, M. and Srinivas, Darbha and Ratnasamy, P.} } @article { ISI:000279085200015, title = {Regularly alternating poly(amideimide)s containing pendent pentadecyl chains: synthesis and characterization}, journal = {European Polymer Journal}, volume = {46}, number = {6}, year = {2010}, month = {JUN}, pages = {1307-1315}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

Two new aromatic diamines containing preformed amide linkages, viz., N,N{\textquoteright}-(4-pentadecyl-1,3-phenylene)bis(4-aminobenzamide) I and N,N{\textquoteright}-(4-pentadecyl-1,3-phenylene)bis(3-aminobenzamide) II, were synthesized by reaction of 4-pentadecylbenzene-1,3-diamine with 4-nitrobenzoylchloride and 3-nitrobenzoylchloride, followed by reduction of the respective dinitro derivatives. A series of new poly(amideimide)s was synthesized by poly-condensation of I and II with four commercially available aromatic dianhydrides, viz., pyromellitic dianhydride (PMDA), 4,4{\textquoteright}-biphenyltetracarboxylic dianhydride (BPDA), 4,4{\textquoteright}-oxydiphthalic anhydride (ODPA), and 4,4{\textquoteright}-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA) in N,N-dimethylacetamide (DMAc) employing conventional two step method via poly(amic acid) intermediate followed by thermal imidization. Reference poly(amideimide)s were synthesized by polycondensation of N,N{\textquoteright}-(1,3-phenylene)bis(4-aminobenzamide) and N,N{\textquoteright}-(1,3-phenylene)bis(3-aminobenzamide) with the same aromatic dianhydrides. Inherent viscosities of poly(amideimide)s containing pendent pentadecyl chains were in the range 0.37-1.23 dL/g in N,N-dimethylacetamide at 30 +/- 0.1 degrees C indicating the formation of medium to high molecular weight polymers. The poly(amideimide)s containing pendent pentadecyl chains were found to be soluble in N,N-dimethylacetamide, N,N-dimethylformamide, 1-methyl-2-pyrrolidinone and pyridine and could be cast into transparent, flexible and tough films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-ray diffractograms also displayed sharp reflection in the small angle region (20 approximate to 3 degrees) for poly(amideimide)s containing pentadecyl chains indicating the formation of layered structure arising from packing of flexible pentadecyl chains. The glass transition temperatures observed for reference poly(amideimide)s were in the range 331-275 degrees C and those for poly(amideimide)s containing pendent pentadecyl chains were in the range 185-286 degrees C indicating a large drop in T(g), owing to the {\textquoteleft}{\textquoteleft}internal plasticization{\textquoteright}{\textquoteright} effect of pentadecyl chains. The temperature at 10\% weight loss (T(10)), determined by TGA in nitrogen atmosphere, were in the range 460-480 degrees C indicating their good thermal stability. (C) 2010 Elsevier Ltd. All rights reserved.

}, keywords = {Glass transition temperature, Pendent pentadecyl chain, Poly(amideimide)s, Preformed amide linkage, thermal stability}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2010.03.007}, author = {Sadavarte, Nilakshi V. and Avadhani, C. V. and Naik, Parimal V. and Wadgaonkar, Prakash P.} } @article { ISI:000277343900009, title = {Relatedness of Indian flax genotypes (Linum usitatissimum L.): an inter-simple sequence repeat (ISSR) primer assay}, journal = {Molecular Biotechnology}, volume = {45}, number = {2}, year = {2010}, month = {JUN}, pages = {161-170}, publisher = {HUMANA PRESS INC}, address = {999 RIVERVIEW DRIVE SUITE 208, TOTOWA, NJ 07512 USA}, abstract = {

The objective of this study was to analyze the genetic relationships, using PCR-based ISSR markers, among 70 Indian flax (Linum usitatissimum L.) genotypes actively utilized in flax breeding programs. Twelve ISSR primers were used for the analysis yielding 136 loci, of which 87 were polymorphic. The average number of amplified loci and the average number of polymorphic loci per primer were 11.3 and 7.25, respectively, while the percent loci polymorphism ranged from 11.1 to 81.8 with an average of 63.9 across all the genotypes. The range of polymorphism information content scores was 0.03-0.49, with an average of 0.18. A dendrogram was generated based on the similarity matrix by the Unweighted Pair Group Method with Arithmetic Mean (UPGMA), wherein the flax genotypes were grouped in five clusters. The Jaccard{\textquoteright}s similarity coefficient among the genotypes ranged from 0.60 to 0.97. When the omega-3 alpha linolenic acid (ALA) contents of the individual genotypes were correlated with the clusters in the dendrogram, the high ALA containing genotypes were grouped in two clusters. This study identified SLS 50, Ayogi, and Sheetal to be the most diverse genotypes and suggested their use in breeding programs and for developing mapping populations.

}, keywords = {ALA, Alpha linolenic acid, Diversity assessment, Linseed, Oil content, Omega-3 fatty acid}, issn = {1073-6085}, doi = {10.1007/s12033-010-9256-7}, author = {Rajwade, Ashwini V. and Arora, Ritu S. and Kadoo, Narendra Y. and Harsulkar, Abhay M. and Ghorpade, Prakash B. and Gupta, Vidya S.} } @article { ISI:000278725100023, title = {Renewable H-2 from glycerol steam reforming: effect of La2O3 and CeO2 addition to Pt/Al2O3 catalysts.}, journal = {Chemsuschem}, volume = {3}, number = {5}, year = {2010}, month = {MAY}, pages = {619-628}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

Glycerol is the main byproduct of biodiesel production and its increased production volume derives from the increasing demand for biofuels. The conversion of glycerol to hydrogen-rich mixtures presents an attractive route towards sustainable biodiesel production. Here we explored the use of Pt/Al2O3-based catalysts for the catalytic steam reforming of glycerol, evidencing the influence of La2O3 and CeO2 doping on the catalyst activity and selectivity. The addition of the latter metal oxides to a Pt/Al2O3 catalyst is found to significantly improve the glycerol steam reforming, with high H-2 and CO2 selectivities. A good catalytic stability is achieved for the Pt/La2O3/Al2O3 system working at 350 degrees C, while the Pt/CeO2/Al2O3 catalyst sharply deactivates after 20 h under similar conditions. Studies carried out on fresh and exhausted catalysts reveal that both systems maintain high surface areas and high Pt dispersions. Therefore, the observed catalyst deactivation can be attributed to coke deposition on the active sites throughout the catalytic process and only marginally to Pt nanoparticle sintering. This work suggests that an appropriate support composition is mandatory for preparing high-performance Pt-based catalysts for the sustainable conversion of glycerol into syngas.

}, keywords = {biofuels, Glycerol, heterogeneous catalysis, platinum, supported catalysts}, issn = {1864-5631}, doi = {10.1002/cssc.200900243}, author = {Montini, Tiziano and Singh, Rakesh and Das, Piyali and Lorenzut, Barbara and Bertero, Nicolas and Riello, Pietro and Benedetti, Alvise and Giambastiani, Giuliano and Bianchini, Claudio and Zinoviev, Sergey and Miertus, Stanislav and Fornasiero, Paolo} } @article { ISI:000281296900029, title = {Reversal from endothermic to exothermic behavior of imidazolium-based ionic liquids in molecular solvents}, journal = {Chemical Physics Letters}, volume = {496}, number = {1-3}, year = {2010}, month = {AUG}, pages = {143-147}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

In this communication, we present an interesting reversal in the enthalpic behavior from endothermic to exothermic on increasing the carbon chain length attached to the imidazolium ring in the imidazolium-based ionic liquids. A systematic investigation is presented on the excess partial molar enthalpy, H(IL)(E) directly measured using isothermal titration calorimeter at 298.15 K for the interactions operating between cation and anion of four imidazolium ionic liquids with aqueous and various non-aqueous solvents. This reversal behavior is analyzed in terms of hydrophobic and solvation effects. (C) 2010 Published by Elsevier B.V.

}, issn = {0009-2614}, doi = {10.1016/j.cplett.2010.07.056}, author = {Rai, Gitanjali and Kumar, Anil} } @article { ISI:000278307300033, title = {Ring opening polymerization of dilactide using salen complex as catalyst}, journal = {Materials Science and Engineering B-Advanced Functional Solid-State Materials}, volume = {168}, number = {1-3, SI}, year = {2010}, note = {Conference on Specialty Advanced Materials and Polymers for Aerospace and Defense and Applications (SAMPADA-2008), Mat Res Soc Singapore, Singapore, SINGAPORE, JUL 03-08, 2005}, month = {APR}, pages = {193-198}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The recent concerns about our environment have led to search for environmentally benign and sustainable materials that could substitute the more commonly used petroleum based materials. Biodegradable and sustainable polylactide (PLA) is becoming one of the most promising and practical materials as a partial replacement for the petroleum-based materials. The commercially available PLA is generally homochiral poly(L-lactide) (PLLA) at present because L-lactic acid with high optical purity can only be obtained in bulk by fermentation of carbohydrate. PLLA is mostly synthesized by ring opening polymerization (ROP) of homochiral L-lactide (LLA), which is a cyclic dimer of L-lactic acid. In the present work, poly(L-lactide)s were synthesized by the ring opening polymerization (ROP) of L-lactide using iron and manganese salen complexes as catalyst. The new iron and manganese salen complexes were synthesized, purified, characterized and used as catalyst for polymerization of L-lactide. The poly(L-lactide)s prepared were characterized by infrared, proton NMR spectroscopy, solution viscosity, gel permeation chromatography, thermal analysis and X-ray diffraction. (C) 2009 Elsevier B.V. All rights reserved.

}, keywords = {Gel permeation chromatography, Iron salen catalyst, L-Lactic acid, L-Lactide, Manganese salen catalyst, Poly(L-lactide), ring opening polymerization, Solution viscosity}, issn = {0921-5107}, doi = {10.1016/j.mseb.2009.10.037}, author = {Idage, Bhaskar B. and Idage, Susheela B. and Kasegaonkar, A. S. and Jadhav, R. V.} } @article { ISI:000276592000007, title = {Robustness of the drosophila segment polarity network to transient perturbations}, journal = {IET Systems Biology}, volume = {4}, number = {2}, year = {2010}, month = {MAR}, pages = {169-176}, publisher = {INST ENGINEERING TECHNOLOGY-IET}, address = {MICHAEL FARADAY HOUSE SIX HILLS WAY STEVENAGE, HERTFORD SG1 2AY, ENGLAND}, abstract = {

Continuous and Boolean models for the Drosophila segment polarity network have shown that the system is able to maintain the wild-type pattern when subjected to sustained changes in the interaction parameters and initial conditions. Embryo development is likely to occur under fluctuating environmental conditions. Here, a well-established Boolean model is used to explore the ability of the segment polarity network to resist transient changes. Paths along which alternate unviable states are reached, and hence critical nodes whose state changes lead the system away from the wild-type state, are identified. It is found that the system appears to be more sensitive to changes that involve activation of normally inactive nodes. Through a simulation of the heat shock response, it is shown how a localised perturbation in one parasegment is more deleterious than a global perturbation affecting all parasegments. The sequence of events involved in the recovery of the system from a global transient heat shock condition is identified. Finally, these results are discussed in terms of the robustness of the system response.

}, issn = {1751-8849}, doi = {10.1049/iet-syb.2009.0036}, author = {Subramanian, K. and Gadgil, Chetan J.} } @article { ISI:000279836400055, title = {Room temperature synthesis of rutile TiO2 hierarchical nanoneedle flower morphology for dye sensitized solar cell}, journal = {Journal of Nanoscience and Nanotechnology}, volume = {10}, number = {9}, year = {2010}, month = {SEP}, pages = {5894-5898}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

Rutile TiO2 nanoneedle flowers (representing concurrent nano-micro hierarchical morphology) with high shape anisotropy ratio are synthesized at room temperature by using a simple and efficient one step electrochemical process of anodic dissolution. This process employs highly acidic bath of perchloric acid (pH \< 2) and a large current density on the surface of Titanium foil to form nanostructures. The diameter and length of rutile TiO2 nanoneedle is similar to 8 nm and 100 nm respectively (aspect ratio \> 10). Dye sensitized solar cell (DSSC) configured using such rutile TiO2 flowers is shown to exhibit IPCE of 30\% and power conversion efficiency of similar to 3.6\%.

}, keywords = {Anodization, DSSC, Nanoneedles, Rutile TiO2}, issn = {1533-4880}, doi = {10.1166/jnn.2010.2475}, author = {Hyam, Rajeshkumar S. and Bhosale, Reshma K. and Lee, Wonjoo and Han, Sung-Hwan and Hannoyer, Beatrice and Ogale, Satishchandra B.} } @article { ISI:000284454600041, title = {Ru(II) phenanthroline complex as catalyst for chemoselective hydrogenation of nitro-aryls in a green process}, journal = {Industrial \& Engineering Chemistry Research}, volume = {49}, number = {23}, year = {2010}, month = {DEC}, pages = {12180-12184}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Ru(II) Phenanthroline [Ru(II)(Phen)(n) where n = 1,2,3] complexes were used as highly chemoselective catalysts for hydrogenation of nitro aryls using molecular hydrogen in an aqueous media. Water, universal solvent, was used as a reaction mixture for hydrogenation of nitro-aryls to make the process green. The chemoselectivity in hydrogenation of substituted nitrobenzene to substituted aniline was obtained as high as \>99\% at about complete conversion of substituted nitrobenzene. The parametric effects, including effect of solvent, effect of ligand, effect of metal to ligand ratio, effect of temperature and pressure, were studied in detail to obtain the best results. The Ru(Phen)(n) was characterized by FTIR, UV-vis, and XPS.

}, issn = {0888-5885}, doi = {10.1021/ie1015969}, author = {Deshmukh, Amit A. and Prashar, Atul K. and Kinage, Anil K. and Kumar, Rajiv and Meijboom, Reinout} } @article {42536, title = {Receptor design and extraction of inorganic fluoride ion from aqueous medium}, journal = {Chemical Communications}, volume = {47}, year = {2011}, month = {MAY}, pages = {7398-7400}, abstract = {

A receptor with acidic methylene hydrogens is found to act as an efficient binding mode for F-. This reagent could as well be used for selective and quantitative extraction of F- from the aqueous solution of NaF and sea water.

}, doi = {10.1039/C1CC11458A}, author = {Das, Priyadip and Mandal, Amal Kumar and Kesharwani, Manoj K. and Suresh, Eringathodi and Ganguly, Bishwajit and Das, Amitava} } @article { ISI:000295856200011, title = {Recurrent somatic embryogenesis and plant regeneration in Angelica glauca Edgew., a critically endangered medicinal plant of the Western Himalaya}, journal = {Journal of Horticultural Science \& Biotechnology}, volume = {86}, number = {5}, year = {2011}, month = {SEP}, pages = {493-498}, publisher = {HEADLEY BROTHERS LTD}, address = {INVICTA PRESS, ASHFORD TN24 8HH, KENT, ENGLAND}, abstract = {

Secondary somatic embryogenesis and plant regeneration from seedling explants of Angelica glauca, an endangered medicinal plant of the Himalaya, is reported for the first time. Callus was obtained from all the explants tested in the present study (i.e., epicotyls, hypocotyls, and cotyledonary nodes). The highest frequency of callus formation (95.8\%) was observed using epicotyl explants on 4.0 mu M 2,4-dichlorophenoxyacetic acid (2,4-D), whereas 70.8\% of hypocotyl explants, and 58.3\% of cotyledonary nodes produced callus. One-hundred percent embryogenic callus was induced from epicotyl explants in 2.0 mu M 6-benzyladenine (BA) and 2.0 mu M alpha-naphthaleneacetic acid (NAA), together with the maximum number of somatic embryos (34.2 embryos per explant). Cotyledonary nodes did not produce somatic embryos. Histological studies confirmed the induction of somatic embryogenesis. Somatic embryos germinated into plantlets upon transfer to half-strength Murashige and Skoog (MS) medium without added plant growth regulators. We observed 85\% survival of these plantlets under field conditions. The development of secondary embryos was also observed when primary embryos were sub-cultured on full-strength MS medium containing 2.0 mu M NAA plus 2.0 mu M BA. This system of recurrent somatic embryogenesis provides a route for gene transfer and also for the large-scale production of this critically endangered medicinal plant.

}, issn = {1462-0316}, author = {Pandey, Meena and Dhar, Uppeandra and Samant, Sher Singh and Shirgurkar, Mrudul Vijay and Thengane, Shubhada Ratnakar} } @article { ISI:000294263900019, title = {Regio- and stereoselective selenium dioxide allylic oxidation of (E)-dialkyl alkylidenesuccinates to (Z)-allylic alcohols: synthesis of natural and unnatural butenolides}, journal = {Organic \& Biomolecular Chemistry}, volume = {9}, number = {18}, year = {2011}, month = {JUN}, pages = {6312-6322}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The first SeO(2) induced (Z)-selective allylic alcohol formation of dialkyl alkylidenesuccinates has been demonstrated to accomplish one-step syntheses of several essential butenolides and fused butenolides via an unusual E- to Z- carbon-carbon double bond isomerisation followed by the lactonization pathway. The observed regio- and stereoselective SeO(2) allylic oxidation protocol has also been extended to the diastereoselective total synthesis of bioactive natural product isomintlactone, its direct conversion to mintlactone and an example of the base-catalyzed intramolecular rearrangement of gamma-lactone to delta-lactone.

}, issn = {1477-0520}, doi = {10.1039/c1ob05709j}, author = {Patel, Ramesh M. and Puranik, Vedavati G. and N. P. Argade} } @article { ISI:000290787100020, title = {Regioselective monoalkylation of dimethyl alkylidenesuccinates: simple approach to dialkyl-substituted maleic anhydrides including chaetomellic acid A}, journal = {Synthesis-Stuttgart}, number = {11}, year = {2011}, month = {JUN}, pages = {1804-1808}, publisher = {GEORG THIEME VERLAG KG}, address = {RUDIGERSTR 14, D-70469 STUTTGART, GERMANY}, abstract = {

Natural and nonnatural dialkylmaleic anhydrides were readily prepared from dimethyl alkylidenesuccinates by sodium hexamethyldisilazide-induced selective monoalkylation followed by base-catalyzed hydrolysis.

}, keywords = {alkylations, Esters, furans, heterocycles, maleic anhydrides}, issn = {0039-7881}, doi = {10.1055/s-0030-1260013}, author = {Kshirsagar, Umesh A. and N. P. Argade} } @article { ISI:000291960800006, title = {Regioselective NaBH4 and DIBAL-H reductions of 3,4-dimethoxyhomopiperonylphthalimide: concise and efficient synthesis of nuevamine and isonuevamine}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry Including Medicinal Chemistry}, volume = {50}, number = {6}, year = {2011}, month = {JUN}, pages = {868-871}, publisher = {COUNCIL SCIENTIFIC \& INDUSTRIAL RES}, address = {ANUSANDHAN BHAWAN, 2 RAFI MARG, NEW DELHI, 110001, INDIA}, abstract = {

Facile synthesis of nuevamine and isonuevamine has been reported via the regioselectivc reduction of hindered and unhindered carbonyl groups of 3,4-dimethoxyhomopiperonylphthalimide, respectively using sodium borohydridc and diisobutylaluminum hydride, Mowed by an acid catalyzed intramolecular dehydrative cyclization pathways. The chemistry involved in obtaining the regioselectivity has been discussed in brief.

}, keywords = {6-dimethoxyhomophthalimide, intramolecular dehydrative cyclizations, isonuevamine, N-Homopiperonyl-5, nuevamine, regioselective reductions, synthesis}, issn = {0376-4699}, author = {Wakchaure, Prasad B. and Kunte, Sunita S. and N. P. Argade} } @article { ISI:000293546100005, title = {Removal of metal ions from aqueous solution using trioctyl phosphine oxide-containing mixed solvents in conjunction with a fibre-supported solid membrane}, journal = {Adsorption Science \& Technology}, volume = {29}, number = {2}, year = {2011}, month = {JAN}, pages = {169-183}, publisher = {MULTI-SCIENCE PUBL CO LTD}, address = {5 WATES WAY, BRENTWOOD CM15 9TB, ESSEX, ENGLAND}, abstract = {

A novel method has been developed for the removal of mercury, arsenic and tin ions using a fibre-supported solid membrane placed between the source phase and the receiving phase which contained trioctyl phosphine oxide (TOPO) in a mixed solvent. The fibre-supported solid membrane was prepared by the esterification of cellulose fibre with tartaric acid at 120 degrees C. The experimental variables explored were the initial concentration of the metal ion (10(-2) to 10(-4) M) in the source phase, the type of mixed solvent employed [containing TOPO, TOPO + acetone, TOPO + tetrahydrofuran, TOPO + 1,4-dioxane, TOPO + methanol, TOPO + ethanol or TOPO + 2-propanol (20-80\% v/v)], the concentration of HCl (0.25-1 M) in the receiving phase and the stirring speed (50-130 rpm) of the bulk source and the receiving phase. The efficiency of the organic solvent in the mixed solvent followed the order: TOPO + tetrahydrofuran \> TOPO + 1,4-dioxane \> TOPO + acetone \> TOPO + 2-propanol \> TOPO + ethanol \> TOPO + methanol \> TOPO. The separation of the metal ions was discussed.

}, issn = {0263-6174}, author = {Gaikwad, Abaji G.} } @article { ISI:000291908500016, title = {Reply to the comments of vicente et al. on {\textquoteleft}{\textquoteleft}liquid phase oxidation of p-vanillyl alcohol over synthetic co-saponite catalyst{\textquoteright}{\textquoteright} applied clay science (2010), doi:10.1016/j.clay.2010.10.026}, journal = {Applied Clay Science}, volume = {52}, number = {4}, year = {2011}, month = {JUN}, pages = {432}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, issn = {0169-1317}, doi = {10.1016/j.clay.2011.04.008}, author = {Rode, Chandrashekhar V. and Garade, Ajit C. and Biradar, Narayan S. and Kshirsagar, V. S.} } @article { ISI:000293119900005, title = {Robust synthesis of enantiopure cyclohexenyl analogues of 2/3-deoxyribose sugars as carbocyclic nucleoside precursors}, journal = {Tetrahedron}, volume = {67}, number = {32}, year = {2011}, month = {AUG}, pages = {5744-5749}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

An expedient synthesis of 2-deoxy (10) and 3-deoxy (11) cyclohexenyl analogues of 2-deoxy and 3-deoxy-D-ribose sugar from commercially available starting materials is reported. Highly efficient enzymatic resolution of the key compound 10 is described using lipase under hydrolytic conditions. The robust methodology applied here will be useful to synthesize cyclohexenyl nucleosides, which possess potent antiviral activity and are capable of gene silencing via RNAi or antisense applications. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Carbocyclic mimics of 2-deoxy-D-ribose and 3-deoxy-D-ribose Enzymatic resolution, CeNA, DA reaction}, issn = {0040-4020}, doi = {10.1016/j.tet.2011.06.003}, author = {Varada, Manojkumar and Kotikam, Venubabu and Kumar, Vaijayanti A.} } @article { ISI:000290940400021, title = {Role of doping-induced photochemical and microstructural properties in the photocatalytic activity of InVO4 for splitting of water}, journal = {Journal of Materials Science}, volume = {46}, number = {16}, year = {2011}, month = {AUG}, pages = {5466-5476}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

We report in this paper on microstructural, optical and photocatalytic properties of single-phase indium orthovanadates, as a function of doping at lattice sites. The UV-visible spectra of these samples exhibited intense UV-region bands at 250 and 350 nm, besides broad absorption band in visible region (350-700 nm). The wavelength at absorption edge and the intensity of visible absorption showed considerable increase on doping of an impurity, particularly at V or O lattice sites. Also, the samples gave rise to blue-green photoluminescence emission, with overriding bands at ca. 420, 450, 460 and 485 nm, on excitation at 240-420 nm wavelengths. The intensity of these fluorescence bands varied with excitation wavelength and impurity content of a sample. In deviation with several earlier studies, only oxygen and no hydrogen were produced during photocatalytic splitting of water, in the experiments conducted under visible light (\> 395 nm) and at a pH of similar to 6.5. The O-2 yield depended on the dispersed metal co-catalyst, impurity content and the addition of methanol as sacrificial reagent. On the other hand, small quantities of hydrogen and no oxygen were evolved on UV-irradiation of pure water using metal/InVO4. These results are ascribed to flat band potentials and the doping-induced inter-band donor and acceptor charge trapping states of InVO4, the presence of which is revealed by XRD, luminescence and XPS studies. Our study also confirms that the onset of absorption edge may not necessarily correspond to band-to-band energy gap of a semiconducting material. This accounts for some anomalous band gap energies reported earlier for InVO4.

}, issn = {0022-2461}, doi = {10.1007/s10853-011-5489-5}, author = {Rakesh, K. and Khaire, S. and Bhange, Deu S. and Dhanasekaran, P. and Deshpande, Suvarna S. and Awate, S. V. and Gupta, N. M.} } @article { ISI:000288529500015, title = {Role of lattice defects and crystallite morphology in the UV and visible-light-induced photo-catalytic properties of combustion-prepared TiO2}, journal = {Materials Chemistry and Physics}, volume = {126}, number = {3}, year = {2011}, month = {APR}, pages = {546-554}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The physico-chemical, photo-physical and micro-structural properties responsible for the strikingly different photocatalytic behavior of combustion-prepared TiO2 (c.TiO2) and Degussa P25 (d.TiO2) samples are elucidated in this study. Electron microscopy and selected area electron diffraction micrographs revealed that the two samples exhibited different morphologies. The grains of c.TiO2 were spherical and comprised of 5-6 nm size primary particle. On the other hand, d.TiO2 consisted of large (0.5-3.0 mu m) size and irregular shape aggregates having primary particles of 15-40 nm cross-sectional diameter. The ESR study revealed that the presence of certain defect states in c.TiO2 helped in stabilization of O-. and Ti3+-OH type species during room-temperature UV-irradiation. No such paramagnetic species were however formed over d.TiO2 under similar conditions. C1s and Ti 2p XPS spectra provide evidence for the presence of some lattice vacancies in c.TiO2 and also for the bulk Ti4+ -\> Ti3+ conversion during its UV-irradiation. Compared to d.TiO2, c.TiO2 displayed considerably higher activity for discoloration of methyl orange but very poor activity for splitting of water, both under UV and visible light radiations. This is attributed to enhanced surface adsorption of dye molecules over c.TiO2, because of its textural features and also the presence of photo-active ion-radicals. On the other hand, the poor activity of c.TiO2 for water splitting is related to certain defect-induced inter-band charge trapping states in the close vicinity of valence and conduction bands of c.TiO2, as revealed by thermoluminescence spectroscopy. Further, the dispersion of nanosize gold particles gave rise to augmented activity of both the catalysts, particularly for water splitting. This is explained by the promotional role of Au-0 or Au-0/TiO2 interfacial sites in the adsorption and charge-adsorbate interaction processes. (C) 2011 Elsevier B.V. All rights reserved.

}, keywords = {Band-structure, Interfaces, Microstructure, Nanostructures, Semiconductors}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2011.01.029}, author = {Deshpande, Aparna and Madras, Giridhar and Gupta, N. M.} } @article { ISI:000291113200050, title = {Role of micro-structure and interfacial properties in the higher photocatalytic activity of TiO2-supported nanogold for methanol-assisted visible-light-induced splitting of water}, journal = {Physical Chemistry Chemical Physics}, volume = {13}, number = {23}, year = {2011}, month = {MAY}, pages = {11329-11339}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This paper deals with the textural, microstructural and interfacial properties of Au/TiO2 nanocomposites, in relation to their photocatalytic activity for splitting of water. TiO2 samples of two different morphologies were employed for dispersing different cocatalysts, such as: Au, Pt, Ag or Cu, for the sake of comparison. The samples were characterized using powder XRD, XPS, UV-visible, thermoluminescence, SEM, HRTEM and SAED techniques. Compared to other metal/TiO2 photocatalysts, Au/TiO2 with an optimum gold loading of 1 wt\% was found to exhibit considerably higher activity for visible light induced production of H-2 from splitting water in the presence of methanol. Further, the sol-gel prepared TiO2 (s.TiO2), having spherical grains of 10-15 nm size, displayed better photoactivity than a Degussa P25 catalyst. The electron microscopy investigations on s.TiO2 revealed significant heterogeneity in grain morphology of individual TiO2 particles, exposure of the lattice planes, metal dispersion, and the interfacial metal/TiO2 contacts. The gold particles were found to be in a better dispersed state. O-2 TPD experiments revealed that the gold nanoparticles and Au/TiO2 interfaces may serve as distinct binding sites for adsorbate molecules. At the same time, our thermoluminescence measurements provide an insight into Au-induced new defect states that may facilitate the semiconductor-to-metal charge transfer transition. In conclusion, the superior photocatalytic activity of Au/TiO2 may relate to the grain morphology of TiO2, dispersion of gold particles, and the peculiar architecture of metal/oxide heterojunctions; giving rise in turn to augmented adsorption of reactant molecules and their interaction with the photo-generated e(-)/h(+) pair. The role played by methanol as a sacrificial reagent in photocatalytic splitting of water is discussed.

}, issn = {1463-9076}, doi = {10.1039/c1cp21194c}, author = {Awate, S. V. and Deshpande, Suvarna S. and Rakesh, K. and Dhanasekaran, P. and Gupta, N. M.} } @article { ISI:000289716300080, title = {Role of promoters in copper chromite catalysts for hydrogenolysis of glycerol}, journal = {Catalysis Today}, volume = {164}, number = {1}, year = {2011}, note = {1st Joint International Conference of the 8th Tokyo Conference on Advanced Catalytic Science and Technology/5th Asia Pacific Congress on Catalysis, Sapporo, JAPAN, JUL 18-23, 2010}, month = {APR}, pages = {447-450}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Various copper chromite catalysts with and without promoters were prepared by simultaneous co-precipitation and digestion technique and the role of promoters (Al, Ba and Zn) was investigated for hydrogenolysis of glycerol to 1,2-propylene glycol (1,2-PG) in both batch and continuous operations. Among various promoters studied, copper chromite catalyst with Ba as a promoter showed the highest activity and selectivity of 85\% to 1,2-PG. This catalyst was found to be active for more than 800 h in a continuous operation also. Ammonia TPD results showed that barium promoted copper chromite catalyst had the highest acidity which facilitates the dehydration of glycerol to acetol which is the first step in hydrogenolysis of glycerol to 1,2-PG. The effect of barium content and variation in the promoters combination was also studied. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {1, 2-Propylene glycol, Acetol, Ammonia TPD, Glycerol hydrogenolysis, Surface acidity}, issn = {0920-5861}, doi = {10.1016/j.cattod.2010.10.032}, author = {Mane, R. B. and Ghalwadkar, Ajay A. and Hengne, Amol M. and Suryawanshi, Y. R. and Rode, C. V.} } @article { ISI:000287268900024, title = {Room temperature ferromagnetism in undoped and Fe doped ZnO nanorods: microwave-assisted synthesis}, journal = {Journal of Solid State Chemistry}, volume = {184}, number = {2}, year = {2011}, month = {FEB}, pages = {391-400}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

One-dimensional (1D) undoped and Fe doped ZnO nanorods of average length similar to 1 mu m and diameter similar to 50 nm have been obtained using a microwave-assisted synthesis. The magnetization (M) and coercivity (H-c) value obtained for undoped ZnO nanorods at room temperature is similar to 5 X 10(-3) emu/g and similar to 150 Oe, respectively. The Fe doped ZnO samples show significant changes in M -H loop with increasing doping concentration. Both undoped and Fe doped ZnO nanorods exhibit a Curie transition temperature (T-c) above 390 K. Electron spin resonance and Mossbauer spectra indicate the presence of ferric ions. The origin of ferromagnetism in undoped ZnO nanorods is attributed to localized electron spin moments resulting from surface defects/vacancies, where as in Fe doped samples is explained by F center exchange mechanism. (C) 2010 Published by Elsevier Inc.

}, keywords = {Diluted magnetic semiconductors, Nanostructures, ZnO}, issn = {0022-4596}, doi = {10.1016/j.jssc.2010.11.008}, author = {Limaye, Mukta V. and Singh, Shashi B. and Das, Raja and Poddar, Pankaj and Kulkarni, Sulabha K.} } @article { ISI:000296548400026, title = {RuCl3-TBHP mediated allylic oxidation of Delta(8(9)) lanosterol derivatives}, journal = {Tetrahedron Letters}, volume = {52}, number = {45}, year = {2011}, month = {NOV}, pages = {6007-6010}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

A variety of Delta(8(9))-lanosterol derivatives were converted into 7,11-dienones using t-butyl hydroperoxide in the presence of ruthenium chloride (RuCl3) in good yields. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Allylic oxidation, Oxygenated steroids, Ruthenium chloride, Steroidal ketones, t-Butyl hydroperoxide}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2011.08.166}, author = {Shingate, Bapurao B. and Hazra, Braja G. and Salunke, Deepak B. and Pore, Vandana S.} } @article { ISI:000301128300003, title = {Radical mediated deoxygenation of inositol benzylidene acetals: conformational analysis, DFT calculations, and mechanism}, journal = {Carbohydrate Research}, volume = {351}, year = {2012}, month = {APR}, pages = {26-34}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Xanthates of 1,3-benzylidene acetal derivatives of myo- and neo-inositols undergo dideoxygenation under Barton-McCombie conditions, as a result of intramolecular abstraction of the benzylidene acetal hydrogen and subsequent cleavage of the acetal ring. Scrutiny of structure of these bicyclic inositol derivatives shows that although the conformation of the two rings can vary depending on the configuration of the inositol ring and the phase in which the molecules are present, both the xanthates lead to the formation of the same dideoxyinositol. DFT calculations on these molecular systems suggest that neo-inositol derivatives undergo conformational change prior to radical formation while myo- inositol derivatives undergo conformational change subsequent to radical formation, during the deoxygenation reaction. A low barrier for intramolecular hydrogen transfer supports the extreme facility of this deoxygenation reaction. (C) 2012 Elsevier Ltd. All rights reserved.

}, keywords = {Deoxygenation, DFT, Inositol, Mechanism, Radical, Xanthate}, issn = {0008-6215}, doi = {10.1016/j.carres.2012.01.001}, author = {Gurale, Bharat P. and Vanka, Kumar and Shashidhar, Mysore S.} } @article { ISI:000312148500013, title = {Rapid microwave synthesis of fluorescent hydrophobic carbon dots}, journal = {RSC Advances}, volume = {2}, number = {32}, year = {2012}, month = {OCT}, pages = {12129-12131}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Fluorescent hydrophobic carbon dots (HCDs) have been fabricated from a poloxamer by a simple microwave assisted process within a few minutes for the first time. Small and distinct spherical HCDs emitted bright blue and green fluorescent light depending upon the excitation wavelength and were dispersed easily in a wide variety of organic solvents. HCDs exhibited excellent water resistant behavior with a contact angle of similar to 122 degrees enforcing good hydrophobic character which will be quite useful in potential surface applications.

}, issn = {2046-2069}, doi = {10.1039/c2ra21048g}, author = {Mitra, Shouvik and Chandra, Sourov and Kundu, Tanay and Banerjee, Rahul and Pramanik, Panchanan and Goswami, Arunava} } @article { ISI:000301712600016, title = {Rapid self-healing hydrogels}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {109}, number = {12}, year = {2012}, month = {MAR}, pages = {4383-4388}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

Synthetic materials that are capable of autonomous healing upon damage are being developed at a rapid pace because of their many potential applications. Despite these advancements, achieving self-healing in permanently cross-linked hydrogels has remained elusive because of the presence of water and irreversible cross-links. Here, we demonstrate that permanently cross-linked hydrogels can be engineered to exhibit self-healing in an aqueous environment. We achieve this feature by arming the hydrogel network with flexible-pendant side chains carrying an optimal balance of hydrophilic and hydrophobic moieties that allows the side chains to mediate hydrogen bonds across the hydrogel interfaces with minimal steric hindrance and hydrophobic collapse. The self-healing reported here is rapid, occurring within seconds of the insertion of a crack into the hydrogel or juxtaposition of two separate hydrogel pieces. The healing is reversible and can be switched on and off via changes in pH, allowing external control over the healing process. Moreover, the hydrogels can sustain multiple cycles of healing and separation without compromising their mechanical properties and healing kinetics. Beyond revealing how secondary interactions could be harnessed to introduce new functions to chemically crosslinked polymeric systems, we also demonstrate various potential applications of such easy-to-synthesize, smart, self-healing hydrogels.

}, keywords = {adhesives, biomimetic materials, Hydrophobicity, molecular dynamics, smart materials}, issn = {0027-8424}, doi = {10.1073/pnas.1201122109}, author = {Phadke, Ameya and Zhang, Chao and Arman, Bedri and Hsu, Cheng-Chih and Mashelkar, Raghunath Anant and Lele, Ashish K. and Tauber, Michael J. and Arya, Gaurav and Varghese, Shyni} } @article {42511, title = {Rare example of TICT based optical responses for the specific recognition of Cr3+ by a 2,2?:6?,2?-terpyridine derivative and demonstration of multiple logic operations}, journal = {Journal of Physical Chemistry C}, volume = {116}, year = {2012}, month = {JUL}, pages = {17448{\textendash}17457}, abstract = {

Chemosensor L showed a nonlinear fluorescence response on specific binding to Cr3+ ion in the presence of various alkali, alkaline-earth, transition, and lanthanide metal ions. A luminescence band with maxima at 512 nm for L was observed (λext = 330 nm) for a twisted intramolecular charge transfer (TICT) transition following antienergy gap law behavior. However, normal energy gap law behavior prevailed on formation of a new nonluminescent charge transfer complex, Mn+{\textperiodcentered}L. For paramagnetic metal ions, paramagnetism induced luminescence quenching could have also contributed to this. A new switched on fluorescence response at λems of 356 nm (λext of 330 nm) was observed due to Franck{\textendash}Condon charge transfer (FC-CT) transition only on the formation of a complex, (Cr3+)2{\textperiodcentered}L. Spectral studies revealed a unique dynamic coordination behavior and migration of Cr3+ from the terpyridyl fragment to the NNMe2 center of L as a function of the varying concentration of another ion (Zn2+) and the subtle difference in the binding affinities of the terpyridyl moiety toward Cr3+ and Zn2+. Further, spectral responses of L toward Zn2+, different concentration of Cr3+, H+ and on subsequent addition of F{\textendash} as different ionic inputs could be correlated well for demonstrating various basic and combinatorial circuits.

}, doi = {10.1021/jp305780y}, author = {Mahato, Prasenjit and Saha, Sukdeb and Das, Amitava} } @article {42504, title = {Ratiometric detection of Cr3+ and Hg2+ by a naphthalimide-rhodamine based fluorescent probe}, journal = {Inorganic Chemistry}, volume = {51}, year = {2012}, month = {JAN}, pages = {1769{\textendash}1777}, abstract = {

Newly synthesized rhodamine derivatives, L1 and L2, are found to bind specifically to Hg2+ or Cr3+ in presence of large excess of other competing ions with associated changes in their optical and fluorescence spectral behavior. These spectral changes are significant enough in the visible region of the spectrum and thus, allow the visual detection. For L1, the detection limit is even lower than the permissible [Cr3+] or [Hg2+] in drinking water as per standard U.S. EPA norms; while the receptor, L2 could be used as a ratiometric sensor for detection of Cr3+ and Hg2+ based on the resonance energy transfer (RET) process involving the donor naphthalimide and the acceptor Cr3+/Hg2+-bound xanthene fragment. Studies reveal that these two reagents could be used for recognition and sensing of Hg2+/Cr3+. Further, confocal laser microscopic studies confirmed that the reagent L2 could also be used as an imaging probe for detection of uptake of these ions in A431 cells.

}, doi = {10.1021/ic202073q}, author = {Mahato, Prasenjit and Saha, Sukdeb and Suresh, E. and Liddo, Rosa Di and Parnigotto, Pier Paolo and Conconi, Maria Teresa and Kesharwani, Manoj K. and Ganguly, Bishwajit and Das, Amitava} } @article { ISI:000309370500010, title = {Reactions in supercritical carbon dioxide}, journal = {Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical \& Analytical Chemistry}, volume = {51}, number = {9-10, SI}, year = {2012}, month = {SEP}, pages = {1298-1305}, publisher = {NATL INST SCIENCE COMMUNICATION-NISCAIR}, address = {DR K S KRISHNAN MARG, PUSA CAMPUS, NEW DELHI 110 012, INDIA}, abstract = {

Use of conventional organic solvents often leads to the formation of hazardous waste, the disposal of which is a matter of environmental concern. Carbon dioxide is considered to be a green reaction medium and a good replacement for conventional organic solvents as it is benign and leads to elimination/reduction of hazardous wastes. Use of CO2 at near/above critical conditions has several additional advantages as the reactions can be pressure-tuned to eliminate transport resistance, increase solvent power and heat capacity. Hence, there has been considerable interest in the use of supercritical carbon dioxide as either a replacement of conventional organic solvent or as a co-solvent in reactions. Herein, recent developmenst in this area during the last decade is reviewed, specifically in gas-liquid (organic hydrogenation, hydroformylation and oxidation) and liquid-liquid (carbon-carbon coupling, alkylation, acetylation, esterification) reactions.

}, keywords = {Alkylation, Carbon dioxide, Hydroformylation, Hydrogenation, Oxidation, Supercritical carbon dioxide}, issn = {0376-4710}, author = {Mayadevi, S.} } @article { ISI:000303083900011, title = {Reactive polymers bearing styrene pendants through selective anionic polymerization of 4-vinylbenzyl methacrylate}, journal = {Macromolecules}, volume = {45}, number = {8}, year = {2012}, month = {APR}, pages = {3387-3393}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Selective anionic polymerization of 4-vinylbenzyl methacrylate at methacrylate site has been achieved using resonance stabilized anionic initiators such as 1,1-diphenylhexyllithium (DPHLi) and tritylpotassium (TritylK) in tetrahydrofuran (THF) at -78 degrees C. Polymerization proceeded selectively through methacrylate functionality of the monomer in a controlled manner and produced polymers and copolymers with narrow molecular weight distribution at low temperatures (\<=-40 degrees C). H-1 NMR of the polymer showed the presence of styrene pendants in every monomeric repeating unit. The polymerization results confirm that the resonance stabilized carbanions with an optimum pK(a) (30 \<= pK(a) \<= 32) of their conjugate acids such as DPHLi and TritylK do not react with styrene functionality at 78 degrees C. The selective initiation without cross-linking is attributed to the differences in the electronegativity between polar methacrylate and styrene functionalities and an attenuation of initiator reactivity at low temperature. Poly(4-vinylbenzyl methacrylate) and its copolymers with the vinyl pendant in close proximity with ester linkage are very reactive and unstable, readily undergoing cross-linking in solution or in solid state with or without a radical initiator.

}, issn = {0024-9297}, doi = {10.1021/ma202750b}, author = {Mohan, Y. Murali and Raghunadh, V. and Sivaram, S. and Baskaran, D.} } @article { ISI:000301985300008, title = {Recent advances in transition-metal-free carbon-carbon and carbon-heteroatom bond-forming reactions using arynes}, journal = {Chemical Society Reviews}, volume = {41}, number = {8}, year = {2012}, month = {JAN}, pages = {3140-3152}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This tutorial review is aimed at highlighting recent developments in transition-metal-free carbon-carbon and carbon-heteroatom bond-forming reactions utilizing a versatile class of reactive intermediates, viz., arynes, which hold the potential for numerous applications in organic synthesis. Key to the success of the resurgence of interest in the rich chemistry of arynes is primarily the mild condition for their generation by the fluoride-induced 1,2-elimination of 2-(trimethylsilyl)aryl triflates. Consequently, arynes have been employed for the construction of multisubstituted arenes with structural diversity and complexity. The versatile transition-metal-free applications of arynes include cycloaddition reactions, insertion reactions and multicomponent reactions. In addition, arynes have found applications in natural product synthesis. Herein, we present a concise account of the major developments that occurred in this field during the past eight years.

}, issn = {0306-0012}, doi = {10.1039/c2cs15310f}, author = {Bhunia, Anup and Yetra, Santhivardhana Reddy and Biju, Akkattu T.} } @article { ISI:000298305400004, title = {Recent applications of starch derivatives in nanodrug delivery}, journal = {Carbohydrate Polymers}, volume = {87}, number = {2}, year = {2012}, month = {JAN}, pages = {987-994}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Starch has found use in industries as diverse as food, textiles, cosmetics, plastics, adhesives, paper, and pharmaceuticals. From a pharmaceutical standpoint, starch finds its value in solid-oral dosage forms, where it has been used as a binder, diluent, and disintegrant. However, only recently has the use of starch in nanotechnology started to make significant advances in biomedical applications, including newer drug delivery techniques. There has been a considerable effort to develop biodegradable nanoparticles as effective drug delivery systems. Being cheap, non-toxic, renewable, biodegradable and compatible with many other materials for industrial applications, starch is attracting the interest of drug delivery scientists. We have put together in a short and concise format, recent applications of starch derivatives in the emerging field of nanodrug delivery with the conclusion that a lot still needs to be done. (C) 2011 Elsevier Ltd. All rights reserved.

}, keywords = {Applications, nanotechnology, Starch}, issn = {0144-8617}, doi = {10.1016/j.carbpol.2011.09.044}, author = {Rodrigues, Asha and Emeje, Martins} } @article {42501, title = {Recognition of Hg 2+ and Cr 3+ in physiological conditions by a rhodamine derivative and its application as a reagent for cell-imaging studies}, journal = {Inorganic Chemistry}, volume = {51}, year = {2012}, month = {DEC}, pages = {336{\textendash}345}, abstract = {

A new rhodamine-based receptor, derivatized with an additional fluorophore (quinoline), was synthesized for selective recognition of Hg2+ and Cr3+ in an acetonitrile/HEPES buffer medium of pH 7.3. This reagent could be used as a dual probe and allowed detection of these two ions by monitoring changes in absorption and the fluorescence spectral pattern. In both instances, the extent of the changes was significant enough to allow visual detection. More importantly, the receptor molecule could be used as an imaging reagent for detection of Hg2+ and Cr3+ uptake in live human cancer cells (MCF7) using laser confocal microscopic studies. Unlike Hg(ClO4)2 or Hg(NO3)2 salts, HgCl2 or HgI2 failed to induce any visually detectable change in color or fluorescence upon interaction with L1 under identical experimental conditions. Presumably, the higher covalent nature of HgII in HgCl2 or HgI2 accounts for its lower acidity and its inability to open up the spirolactam ring of the reagent L1. The issue has been addressed on the basis of the single-crystal X-ray structures of L1{\textperiodcentered}HgX2 (X{\textendash} = Cl{\textendash} or I{\textendash}) and results from other spectral studies.

}, doi = {10.1021/ic2017243}, author = {Saha, Sukdeb and Mahato, Prasenjit and Reddy, Upendar G. and Suresh, E. and Chakrabarty, Arindam and Baidya, Mithu and Ghosh, Sudip K. and Das, Amitava} } @article {42500, title = {Recognition of Hg2+ion through restricted imine isomerization: crystallographic evidence and imaging in live cells}, journal = {Organic Letters}, volume = {14}, year = {2012}, month = {JUN}, pages = {2980{\textendash}2983}, abstract = {

A newly synthesized imine-based receptor (L) showed remarkable specificity toward the Hg2+ ion in aqueous media over other metal ions. Coordination of L to Hg2+ induces a turn-on fluorescence response. This was explained based on the restricted imine isomerization along with PET on coordination to Hg2+. X-ray structural evidence tends to favor a C{\textendash}C bond rotation rather than C=N isomerization for adopting a favorable conformation in L for coordination to Hg2+. This reagent could be used for imaging the accumulation of Hg2+ ions in HeLa cells.

}, doi = {10.1021/ol3009733}, author = {Mandal, Amal Kumar and Suresh, Moorthy and Das, Priyadip and Suresh, E. and Baidya, Mithu and Ghosh, Sudip K. and Das, Amitava} } @article { ISI:000302540600008, title = {Regio- and stereoselective synthesis of new substituted tetrahydrocarbazoles and carbazoles using diels-alder reactions}, journal = {Synthetic Communications}, volume = {42}, number = {12}, year = {2012}, month = {NOV}, pages = {1786-1795}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Diels-Alder reactions of 3-vinylindoles were carried out with methyl acrylate and N-phenylmaleimide as dienophiles under microwave conditions to furnish unreported tetrahydrocarbazoles regio- and stereoselectively in good yields. Further dehydrogenation resulted in new substituted carbazoles.

}, keywords = {Carbazoles, regio- and stereoselective Diels-Alder reactions, tetrahydrocarbazoles}, issn = {0039-7911}, doi = {10.1080/00397911.2010.544440}, author = {Hingane, Dattatray G. and Goswami, Shailesh K. and Puranik, Vedavati G. and Kusurkar, Radhika S.} } @article { ISI:000307077500019, title = {Regulation of BACE1 by miR-29a/b in a cellular model of spinocerebellar ataxia 17}, journal = {RNA Biology}, volume = {9}, number = {6, SI}, year = {2012}, month = {JUN}, pages = {891-899}, publisher = {LANDES BIOSCIENCE}, address = {1806 RIO GRANDE ST, AUSTIN, TX 78702 USA}, abstract = {

Polyglutamine diseases are a class of neurodegenerative disorders characterized by expansion of polyglutamine repeats, protein aggregation and neuronal cell death in specific regions of the brain. The expansion of a polyglutamine repeat in the TATA binding protein (TBP) causes a neurodegenerative disease, Spinocerebellar Ataxia 17 (SC A17). This disease is characterized by intranuclear protein aggregates and selective loss of cerebellar neurons, including Purkinje cells. MicroRNAs are small, endogenous, regulatory non-coding RNA molecules that bind to mRNAs with partial complementarity and interfere in their expression. Here, we used a cellular model of SC A17 where we expressed TBP with 16 (normal) or 59 (pathogenic) polyglutamines and found differential expression of several microRNAs. Specifically, we found two microRNAs, miR-29a/b, were downregulated. With miR-29a/b downregulation, we found an increased expression of targets of miR-29a/b-beta-site amyloid precursor protein cleaving enzyme 1 (BACE 1), p53 upregulated modulator of apoptosis (PUMA) and BAK, increased cytochrome c release and apoptosis. Restoration of miR-29a/b in the pathogenic polyglutamine background reduced the BACE 1 expression. While, antagomiRs against miR-29a/b resulted in an increase in BACE 1 levels and neuronal apoptosis. In spite of the elevation of BACE 1 in Alzhemiers disease, its role in neuronal cell death has not been established. Here, we show that increased BACE 1 expression is not sufficient to cause apoptosis. However restoring level of BACE 1 to normal in polyglutamine cells partially reduced neuronal apoptosis. We show a role for the miR-29a/b-BACE 1 regulatory interaction in SC A17, suggesting that this microRNA could be part of a common molecular mechanism leading to neuronal cell death in multiple neurodegenerative disorders. The identification of a common mechanism of microRNA mediated neurodegeneration not only improves our understanding of the process, but also provides promising and novel therapeutic targets.

}, keywords = {BACE1, miR-29a/b, neurodegeneration, SCA17, TBP}, issn = {1547-6286}, doi = {10.4161/rna.19876}, author = {Roshan, Reema and Ghosh, Tanay and Gadgil, Mugdha and Pillai, Beena} } @article { ISI:000309568700049, title = {Reply to comment on {\textquoteleft}{\textquoteleft}Reductive dechlorination of gamma-hexachlorocyclohexane using Fe-Pd bimetallic nanoparticles{\textquoteright}{\textquoteright}, by C. Noubactep}, journal = {Journal of Hazardous Materials}, volume = {235}, year = {2012}, month = {OCT}, pages = {392-393}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, issn = {0304-3894}, doi = {10.1016/j.jhazmat.2011.04.015}, author = {Nagpal, Varima and Bokare, Alok D. and Chikate, Rajeev C. and Rode, Chandrashekhar V. and Paknikar, Kishore M.} } @article { ISI:000298731600002, title = {Reply to the {\textquoteleft}{\textquoteleft}comments to CFD simulation of stirred tanks: comparison of turbulence models. part I: radial flow impellers and part II: axial flow impellers, multiple impellers and multiphase dispersions{\textquoteright}{\textquoteright}}, journal = {Canadian Journal of Chemical Engineering}, volume = {90}, number = {1}, year = {2012}, month = {FEB}, pages = {3-6}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, issn = {0008-4034}, doi = {10.1002/cjce.21610}, author = {Joshi, J. B. and Nere, N. K. and Rane, C. V. and Murthy, B. N. and Mathpati, Channamallikarjun S. and Patwardhan, A. W. and Ranade, V. V.} } @article {42509, title = {Restricted conformational flexibility of a triphenylamine derivative on the formation of host-guest complexes with various macrocyclic hosts}, journal = {Chemistry a European Journal}, volume = {18}, year = {2012}, month = {MAR}, pages = {3906{\textendash}3917}, abstract = {

Herein, we report the host{\textendash}guest-type complex formation between the host molecules cucurbit[7]uril (CB[7]), β-cyclodextrin (β-CD), and dibenzo[24]crown-8 ether (DB24C8) and a newly synthesized triphenylamine (TPA) derivative 1X3 as the guest component. The host{\textendash}guest complex formation was studied in detail by using 1H NMR, 2D NOESY, UV/Vis fluorescence, and time-resolved emission spectroscopy. The chloride salt of the TPA derivative was used for recognition studies with CB[7] and β-CD in an aqueous medium. The restricted internal rotation of the guest molecule on complex formation with either of these two host molecules was reflected in the enhancement of the emission quantum yield and the average excited-state lifetime for the triphenylamine-based excited states. Studies with DB24C8 as the host molecule were performed in dichloromethane, a medium that maximizes the noncovalent interaction between the host and guest fragments. The F{\"o}rster resonance energy transfer (FRET) process involving DB24C8 and 1(PF6)3, as the donor and acceptor fragments, respectively, was established by electrochemical, steady-state emission, and time-correlated single-photon counting studies.

}, doi = {10.1002/chem.201103079}, author = {Mandal, Amal Kumar and Suresh, Moorthy and Das, Priyadip and Das, Amitava} } @article {43314, title = {Reversible assembly and disassembly of micelles by a polymer that switches betweenhydrophilic and hydrophobic wettings}, journal = {Langmuir}, volume = {28}, year = {2012}, month = {JUN}, pages = {10097-10104}, abstract = {Supramolecular complexes involving nanoscopic amphiphilic assemblies (AAs) and polyelectrolytes have been used to prepare a variety of materials, wherein the dynamic AAs retain the structural features, but the polyelectrolytes undergo conformational changes. Here we show that a charge bearing rigid conjugated polymer can alter the structural features and disassemble AAs. We also demonstrate reversible assembly and disassembly of AAs by controlling the number of charges on the rigid polymer. During the disassembly, the guest molecules sequestered in the AAs are released. The rate of release has been modulated by changing the morphology of the charge bearing polymer. Concomitant to the AAs disassembly, the polymer surface becomes hydrophobic due to the binding of the amphiphiles on the charges of the polymer backbone. By controlling the charges on the polymer, the surface wettability was varied gradually from hydrophilic to hydrophobic.}, doi = {10.1021/la301760a}, author = {Dutta, Kingshuk and Mahale, Rajashree Y. and Arulkashmir, Arulraj and Krishnamoorthy, Kothandam} } @article { ISI:000297559200027, title = {Reversible phase transformation in proton conducting strandberg-type POM based metal organic material}, journal = {Chemical Communications}, volume = {48}, number = {2}, year = {2012}, month = {NOV}, pages = {266-268}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A Cu(II)-phenanthroline connected Strandberg-type polyoxometalate based proton conducting MOF, Cu3Mo5P2, that contains one dimensional parallel water channels has been reported. Cu3Mo5P2 shows proton conduction at room temperature as well as elevated temperature.

}, issn = {1359-7345}, doi = {10.1039/c1cc15162b}, author = {Dey, Chandan and Kundu, Tanay and Banerjee, Rahul} } @article {42503, title = {Rhodamine-alginate conjugate as self-indicating gel beads for efficient detection and scavenging of Hg 2+ and Cr 3+ in aqueous media}, journal = {Chemical Communications}, volume = {48}, year = {2012}, month = {NOV}, pages = {1659-1661}, abstract = {

Effective extraction of Hg2+ and Cr3+ ions from aqueous media by novel rhodamine{\textendash}alginate polymer-based highly fluorogenic, as well as colorimetric, chemosensor beads.

}, doi = {10.1039/C1CC16554B}, author = {Saha, Sukdeb and Chhatbar, Mahesh U. and Mahato, Prasenjit and Praveen, L. and Siddhanta, A. K. and Das, Amitava} } @article {42712, title = {Ruthenium pincer-catalyzed cross-dehydrogenative coupling of primary alcohols with secondary alcohols under neutral conditions}, journal = {Advanced Synthesis \& Catalysis}, volume = {354}, year = {2012}, month = {SEP}, pages = {2403{\textendash}2406}, abstract = {

Cross-dehydrogenative coupling of primary alcohols with secondary alcohols to obtain mixed esters with the liberation of molecular hydrogen is achieved in high yield and good selectivity under neutral conditions, using a bipyridyl-based PNN ruthenium(II) pincer catalyst.

}, doi = {10.1002/adsc.201200438}, author = {Srimani, Dipankar and Balaraman, Ekambaram and Gnanaprakasam, Boopathy and Ben-David, Yehoshoa and Milstein, David} } @article { ISI:000309597000010, title = {Ruthenium-catalyzed C6-propenylation reactions of substituted pyridine derivatives: directed and direct C-H activation}, journal = {Chemistry-A European Journal}, volume = {18}, number = {42}, year = {2012}, month = {OCT}, pages = {13288-13292}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, keywords = {alkenylation, C?H activation, nitrogen heterocycles, pyridine derivatives, ruthenium}, issn = {0947-6539}, doi = {10.1002/chem.201202379}, author = {Goriya, Yogesh and Ramana, Chepuri V.} } @article {42741, title = {Rational design of highly active {\textquotedblleft}hybrid{\textquotedblright} phosphine-phosphinite pincer iridium catalysts for alkane metathesis}, journal = {ACS Catalysis}, volume = {3}, year = {2013}, month = {SEP}, pages = {2505{\textendash}2514}, abstract = {

Both the bisphosphine and bisphosphinite pincer complexes (tBu4PCP)IrH2 and (tBu4POCOP)IrH2 can cocatalyze alkane metathesis in tandem with olefin metathesis catalysts, but the two complexes have different resting states during catalysis, suggesting that different steps are turnover-limiting in each case. This led to the hypothesis that a complex with intermediate properties would be catalytically more active than either of these two species. Accordingly, {\textquotedblleft}hybrid{\textquotedblright} phosphine{\textendash}phosphinite pincer ligands (PCOP) and the corresponding iridium complexes were synthesized (3c{\textendash}e). In tandem with olefin-metathesis catalyst MoF12, (tBu4PCOP)IrH2 displays significantly higher activity for the metathesis of n-hexane than does (tBu4PCP)IrH2 or (tBu4POCOP)IrH2. (tBu2PCOPiPr2)IrH4 (3d) is even more active (\>30-fold more active than (tBu4POCOP)IrH2) and affords nearly 4.6 M alkane products after 8 h at 125 {\textdegree}C.

}, doi = {10.1021/cs400624c}, author = {Nawara-Hultzsch, Agnieszka J. and Hackenberg, Jason D. and Punji, Benudhar and Supplee, Carolyn and Emge, Thomas J. and Bailey, Brad C. and Schrock, Richard R. and Brookhart, Maurice and Goldman, Alan S.} } @article { ISI:000326946900004, title = {Rationally designed CuFe2O4-mesoporous Al2O3 composite towards stable performance of high temperature water-gas shift reaction}, journal = {Chemical Communications}, volume = {49}, number = {96}, year = {2013}, month = {JUL}, pages = {11257-11259}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

High temperature water-gas shift reaction was demonstrated for the first time on a CuFe2O4-mesoporous alumina nanocomposite between 350 and 550 degrees C with 70-80\% CO-conversion using simulated waste derived syngas under realistic conditions. Despite high Al-content, the catalyst exhibited stable activity, which was attributed to the nano-architectured robust porous nature of alumina integrated with surrounding CuFe2O4.

}, issn = {1359-7345}, doi = {10.1039/c3cc43699c}, author = {Subramanian, Vijayanand and Gnanakumar, Edwin S. and Jeong, Dae-Woon and Han, Won-Bi and Gopinath, Chinnakonda S. and Roh, Hyun-Seog} } @article { ISI:000318447100001, title = {Reactivity of thiophenes, oligothiophenes and benzothiophenes}, journal = {Advances in Heterocyclic Chemistry}, volume = {108}, year = {2013}, month = {DEC}, pages = {1-161}, publisher = {ELSEVIER ACADEMIC PRESS INC}, address = {525 B STREET, SUITE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

This article surveys the literature on the reactivity of thiophenes and benzothiophenes published since the appearance of the third edition of Comprehensive Heterocyclic Chemistry. Two areas that have received maximum attention are: (1) homo- and cross-coupling reactions leading to C C bond formation with high site selectivity and under mild reaction conditions, as well as the regioselective introduction of heteroatom substituents and (2) dithienylethenes and their symmetry-allowed photocyclized isomers, with special reference to the use of this photochromic system as photoswitching units.

}, keywords = {Benzothiophenes and oligothiophenes, Newer results on the reactivity of thiophenes, Pericyclic reactions, Transition metal-catalyzed bond formation}, isbn = {978-0-12-404598-9}, issn = {0065-2725}, doi = {10.1016/B978-0-12-404598-9.00001-8}, author = {Rajappa, Srinivasachari and Gumaste, Vikas K.}, editor = {Katritzky, A. R.} } @article { ISI:000327175500054, title = {Reactivity umpolung in intramolecular ring closure of 3,4-disubstituted butenolides: diastereoselective total synthesis of paeonilide}, journal = {Organic Letters}, volume = {15}, number = {22}, year = {2013}, month = {NOV}, pages = {5826-5829}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Remarkable reactivity reversal stratagem in 3,4-disubstituted butenolides under acidic conditions is described. Design of a suitably substituted multifunctional butenolide followed by an acid-catalyzed chemo- and diastereoselective intramolecular ring closure via the reactivity umpolung has been demonstrated to accomplish a concise total synthesis of paeonilide. Overall, the present protocol involves one-pot reduction of an a,alpha,beta-unsaturated carbon carbon double bond and intramolecular nucleophilic insertion of oxygen function at the electron-rich gamma-position of butenolide. The involved mechanistic aspects have also been discussed.

}, issn = {1523-7060}, doi = {10.1021/ol4028804}, author = {Deore, Prashant S. and N. P. Argade} } @article {PACHFULE, title = {Realistic host-vector transmission model for describing malaria prevalence pattern}, journal = {Bulletin of Mathematical Biology}, volume = {75}, number = {12}, year = {2013}, month = {DEC}, pages = {2499-2528}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Malaria continues to be a major public health concern all over the world even after effective control policies have been employed, and considerable understanding of the disease biology have been attained, from both the experimental and modelling perspective. Interactions between different general and local processes, such as dependence on age and immunity of the human host, variations of temperature and rainfall in tropical and sub-tropical areas, and continued presence of asymptomatic infections, regulate the host-vector interactions, and are responsible for the continuing disease prevalence pattern. In this paper, a general mathematical model of malaria transmission is developed considering short and long-term age-dependent immunity of human host and its interaction with pathogen-infected mosquito vector. The model is studied analytically and numerically to understand the role of different parameters related to mosquitoes and humans. To validate the model with a disease prevalence pattern in a particular region, real epidemiological data from the north-eastern part of India was used, and the effect of seasonal variation in mosquito density was modelled based on local climactic data. The model developed based on general features of host-vector interactions, and modified simply incorporating local environmental factors with minimal changes, can successfully explain the disease transmission process in the region. This provides a general approach toward modelling malaria that can be adapted to control future outbreaks of malaria.

}, keywords = {Basic reproduction number, Environmental effects, Malaria model, Prevalence data, Stability analysis}, issn = {0092-8240}, doi = {10.1007/s11538-013-9905-7}, author = {Mandal, Sandip and Sinha, Somdatta and Sarkar, Ram Rup} } @article {42740, title = {Recent advances in transition-metal-free direct C{\textendash}C and C{\textendash}heteroatom bond forming reactions}, journal = {RSC Advances}, volume = {3}, year = {2013}, month = {APR}, pages = {11957-11986}, abstract = {

The efficient generation of biaryl compounds and heterocycles via the advent of the transition-metal-free coupling reaction constitutes an important development in the last few years. Although early methods for the construction of such molecules involved transition metals, recent advances in the field have witnessed a myriad of elegant reports without the use of metal sources. The serendipitous discovery and observation of synthetic chemists have realized that there lies a great potential in exploiting the inherent reactivity of molecules in absence of transition metal. The key to the success of such coupling reactions is the use of a strong base, oxidant and a catalytic amount of N-donor ligands which contribute significantly. This review aims to highlight the recent progress in the field of transition-metal-free direct C{\textendash}C and C{\textendash}heteroatom bond forming reactions via the use of a strong base and (or) an oxidant.

}, doi = {10.1039/C3RA40813B}, author = {Mehta, Vaibhav P. and Punji, Benudhar} } @article { ISI:000325548600016, title = {Redox-mediated synthesis of functionalised graphene: a strategy towards 2D multifunctional electrocatalysts for energy conversion applications}, journal = {ChemPlusChem}, volume = {78}, number = {10}, year = {2013}, month = {OCT}, pages = {1296-1303}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

A simple, one-step synthetic route for developing a two-dimensional multifunctional electrocatalyst is reported, by the functionalisation of graphene using oxidised ethylenedioxythiophene (O-EDOT). The mutually assisted redox reaction between graphene oxide (GO) and EDOT facilitates the reduction of GO to graphene with a concomitant deposition of O-EDOT on the surface of the graphene. The oxidised surface of GO catalyses the reaction without using an added reducing agent, so a controlled and uniform deposition of O-EDOT is ensured on the surface of graphene, which essentially prevents the restacking of the layers. UV/Visible, IR, Raman and X-ray photoelectron spectroscopy give valid evidence for the reduction and functionalisation of graphene sheets. The functional groups present on the surface of graphene are found to tune the physical and chemical properties of graphene. Consequently, the functionalised material displays enhanced electrocatalytic activity for the reduction of oxygen to water and I3- to I- relative to pristine graphene. These distinct property characteristics make the material a versatile cathode electrocatalyst for both alkaline anion-exchange membrane fuel cells and dye-sensitised solar cells.

}, keywords = {electrocatalysts, fuel cells, graphene, redox chemistry, solar cells}, issn = {2192-6506}, doi = {10.1002/cplu.201300153}, author = {Unni, SreeKuttan M. and Bhange, Siddheshwar N. and Anothumakkool, Bihag and Kurungot, Sreekumar} } @article { ISI:000326495000058, title = {Relating pore hydrophilicity with vapour adsorption capacity in a series of amino acid based metal organic frameworks}, journal = {CrystEngComm}, volume = {15}, number = {45}, year = {2013}, month = {AUG}, pages = {9634-9640}, publisher = {ROYAL SOC CHEMISTRY}, type = {Article}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A new Zn based porous homochiral metal-organic framework, ThrZnOAc, belonging to unh topology, has been synthesized using pyridyl functionalized threonine and Zn(OAc)(2) as the metal precursor. Stepwise substitution of the homochiral MOF backbone by simply changing the sidearm of the amino acids (isopropyl in the case of valine, methyl in alanine and hydroxyethyl in threonine) resulted in increased water adsorption in ThrZnOAc compared to the previously reported ValZnOAc/AlaZnOAc. Extensive solvent sorption isotherms (water, methanol, isopropanol and toluene) have been carried out, which revealed high solvophilic interaction with polar solvents in ThrZnOAc due to the polar pore [2-hydroxyethyl {-CH(OH)CH3} sidearm of the amino acid], which is not prominent in the corresponding valine/alanine counterparts. The aforementioned functionalization in a series of isostructural amino acid based MOFs with the only difference being in the sidearm and their emergence as enhanced solvophilic materials is unprecedented in the MOF literature.

}, issn = {1466-8033}, doi = {10.1039/c3ce41083h}, author = {Kundu, Tanay and Sahoo, Subash Chandra and Banerjee, Rahul} } @article {42863, title = {Relay catalytic branching cascade: technique to access diverse molecular scaffolds}, journal = {Angewandte Chemie International Edition}, volume = {52}, year = {2013}, month = {JAN}, pages = {2251-2255}, doi = {10.1002/anie.201208738}, author = {Patil, Nitin T. and Shinde, Valmik S. and Sridhar, Balasubramanian} } @article {42620, title = {Resistome analysis of mycobacterium tuberculosis: identification of aminoglycoside 2{\textquoteright}-nacetyltransferase (AAC) as co-target for drug desigining}, journal = {Bioinformation}, volume = {9}, year = {2013}, month = {FEB}, pages = {174-181}, abstract = {

The emergence of multidrug resistant tuberculosis (MDRTB) highlights the urgent need to understand the mechanisms of resistance to the drugs and to develop a new arena of therapeutics to treat the disease. Ethambutol, isonazid, pyrazinamide, rifampicin are first line of drugs against TB, whereas aminoglycoside, polypeptides, fluoroquinolone, ethionamide are important second line of bactericidal drugs used to treat MDRTB, and resistance to one or both of these drugs are defining characteristic of extensively drug resistant TB. We retrieved 1,221 resistant genes from Antibiotic Resistance Gene Database (ARDB), which are responsible for resistance against first and second line antibiotics used in treatment of Mycobacterium tuberculosis infection. From network analysis of these resistance genes, 53 genes were found to be common. Phylogenetic analysis shows that more than 60\% of these genes code for acetyltransferase. Acetyltransferases detoxify antibiotics by acetylation, this mechanism plays central role in antibiotic resistance. Seven acetyltransferase (AT-1 to AT-7) were selected from phylogenetic analysis. Structural alignment shows that these acetyltransferases share common ancestral core, which can be used as a template for structure based drug designing. From STRING analysis it is found that acetyltransferase interact with 10 different proteins and it shows that, all these interaction were specific to M. tuberculosis. These results have important implications in designing new therapeutic strategies with acetyltransferase as lead co-target to combat against MDR as well as Extreme drug resistant (XDR) tuberculosis.

}, doi = {10.6026/97320630009174}, author = {Joshi R. S. and Jamdhade M. D. and Sonawane M. S. and Giri, Ashok P.} } @article { ISI:000324223600112, title = {Response to the comments on {\textquoteleft}Investigations on Ru doped ZnO: strain calculations and gas sensing study{\textquoteright}}, journal = {Sensors and Actuators B-Chemical}, volume = {186}, year = {2013}, month = {SEP}, pages = {826}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, issn = {0925-4005}, doi = {10.1016/j.snb.2013.05.089}, author = {Navale, Shalaka C. and Ravi, V. and Mulla, Imtiaz S.} } @article { ISI:000321590000015, title = {Rhenium(I) tricarbonyl complex of 5,20-bis(p-tolyl)-10,15-bis(p-methoxyphenyl)-21-selenaporphyrin: first X-ray structural characterization of metal complex of 21-selenaporphyrin}, journal = {Dalton Transactions}, volume = {42}, number = {30}, year = {2013}, month = {MAY}, pages = {10798-10806}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Synthesis and first structural characterization of hexa coordinated rhenium(I)tricarbonyl complex of 5,20-bis( p-tolyl)-10,15-bis(p-methoxyphenyl)-21-selenaporphyrin 3 are described. The Re(I)complex of 21-selenaporphyrin 3 was synthesized by treating free base 21-selenaporphyrin in 1,2-dichlorobenzene with Re(CO)(5)Cl at reflux for 7 h and analyzed using mass, NMR, FT-IR, UV-vis and electrochemical techniques. The first structure of metal complex of 21-selenaporphyrin was determined by X-ray single crystal analysis. The crystal structure revealed that the Re(CO)(3) coordinates to two of the three inner nitrogens and one selenium to produce compound 3. The selenophene ring bent towards the Re(I)ion and the selenium is displaced by 0.41 angstrom from the mean plane of 24-atoms to coordinate with Re(I)ion in eta(1)-fashion. The 21-selenaporphyrin is distorted in compound 3 compared to free base 21-selenaporphyrin. H-1 and C-13 NMR studies indicated that compound 3 exhibits fluxional behaviour in coordination mode of binding in solution. The compound 3 is highly stable and does not undergo decomplexation under acidic conditions. The absorption spectra showed three broad Q-bands and splitted Soret band and electrochemical studies indicated that compound 3 is stable under redox conditions.

}, issn = {1477-9226}, doi = {10.1039/c3dt51024g}, author = {Ghosh, Avijit and Gonnade, Rajesh G. and Ravikanth, Mangalampalli} } @article { ISI:000326049600003, title = {Rheology and microstructural studies of regenerated silk fibroin solutions}, journal = {Rheologica Acta}, volume = {52}, number = {10-12}, year = {2013}, month = {NOV}, pages = {833-840}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Regenerated silk fibroin solutions (RSF) are produced by dissolving degummed silk fibers in water. We have observed that RSF solutions at a concentration less than 15 \% by weight exhibit an unusual gel-like response in conventional shear rheology measurements. At higher concentrations, the response is predominantly viscous (or liquid-like). We have probed this counterintuitive behavior of silk fibroin solutions by using microrheology, and interfacial rheometry. Scattering techniques were also used to understand the microstructure of RSF solutions as a function of the concentration. Our studies suggest that the gel-like response of the RSF solution may result from the formation of an interfacial film at the air-solution interface, which dominates the bulk rheological response.

}, keywords = {Interfacial rheology, Microrheology, Rheology, Silk}, issn = {0035-4511}, doi = {10.1007/s00397-013-0723-5}, author = {Nisal, Anuya and Kalelkar, Chirag and Bellare, Jayesh R. and Lele, Ashish K.} } @article { ISI:000326319800045, title = {Role of metal ion in specific recognition of pyrophosphate ion under physiological conditions and hydrolysis of the phosphoester linkage by alkaline phosphatase}, journal = {Inorganic Chemistry}, volume = {52}, number = {19}, year = {2013}, month = {OCT}, pages = {11034-11041}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Complexes synthesized from Zn(II), Cu(II), and Cd(II), using a dipicolyl amine derivative (L), showed unique specificity toward pyrophosphate ion (PPi or P4O74-) among all other common anionic analytes, including different biologically significant phosphate ion (PO43-, H2PO42-) or phosphate-ion-based nucleotides, such as AMP, ADP, ATP, and CTP. However, the relative affinities of PPi toward these three metal complexes were found to vary and follow the order K-a(L.Zn-PPi) \> are given in units of (L.Cu-PPi)(a) \>= K-a(L.Cd-PPi). Luminescence responses of the receptor L were substantial on binding to Zn2+ and Cd2+, while relatively a much smaller luminescence response was observed in the presence of Cu2+. Luminescence responses of L.M-PPi (M is Zn2+, Cd2+, and Cu2+) were further modified on binding to the PPi ion. This could be utilized for quantitative detection of PPi in physiological condition as well as for developing a real time {\textquoteleft}{\textquoteleft}turn-on{\textquoteright}{\textquoteright} (for L.Zn and L.Cu) and {\textquoteleft}{\textquoteleft}turn-off{\textquoteright}{\textquoteright} (for L.Cd) fluorescence assay for evaluating the enzymatic activity of alkaline phosphatase (ALP). Experimental results revealed how the subtle differences in the binding affinities between PPi and M in L.M (M is Zn2+, Cd2+, and Cu2+), could influence the cleavage of the phosphoester linkage in PPi by ALP. The DFT calculations further revealed that the hydrolytic cleavage of the metal ion coordinated phosphoester bond is kinetically faster than that for free PPi and thus, rationalized the observed difference in the cleavage of the phosphoester bond by an important mammalian enzyme such as ALP in the presence of different metal complexes.

}, issn = {0020-1669}, doi = {10.1021/ic401243h}, author = {Das, Priyadip and Chandar, Nellore Bhanu and Chourey, Shishir and Agarwalla, Hridesh and Ganguly, Bishwajit and Das, Amitava} } @article { ISI:000326296800033, title = {Role of substituents on the reactivity and electron density profile of diimine ligands: a density functional theory based study}, journal = {Journal of Chemical Sciences}, volume = {125}, number = {5}, year = {2013}, month = {SEP}, pages = {1247-1258}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

In this paper, we study the reactivity of diimines like 2, 2({\textquoteright})-bipyridine, 1, l0-phenanthroline and 1, 2, 4-triazines using density-based reactivity descriptors. We discuss the enhancement or diminution in the reactivity of these ligands as a function of two substituent groups, namely methyl (-CH3) group and phenyl (-C6H5) group. The global reactivity descriptors explain the global affinity and philicity of these ligands, whereas the local softness depicts the particular site selectivity. The inter-molecular reactivity trends for the same systems are analysed through the philicity and group philicity indices. The sigma-donor character of these ligands is quantified with the help of electron density profile. In addition, the possible strength of interaction of these ligands with metal ions is supported with actual reaction energies of Ru-L complexes.

}, keywords = {2, 2 {\textquoteleft}-bipyridine, DFT, diimine, Reactivity descriptors, Ru-ligand interaction, substituent effects}, issn = {0974-3626}, doi = {10.1007/s12039-013-0469-8}, author = {Kulkarni, Bhakti S. and Mishra, Deepti and Pal, Sourav} } @article { ISI:000340446300077, title = {Random copolyesters containing perylene bisimide: flexible films and fluorescent fibers}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, number = {15}, year = {2014}, month = {AUG}, pages = {12457-12466}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Random copolyesters of poly(L-lactic acid) (PLLA) and [poly-(1,4-cyclohexylenedimethylene-1,4- cyclohexanedicarboxylate)] (PCCD) incorporating varying mol ratios of perylene bisimide (PBI) were developed via a high-temperature solution-blending approach. PCCD incorporating PBI was developed by melt polycondenzation followed by a polyester-polyester transesterification reaction between PCCD PBI and PLLA. The polymers exhibited good solubility in common organic solvents and formed free-standing films, which showed bright red emission upon irradiation with ultraviolet radiation. A solid state fluorescence quantum yield of 10\% was observed for this PBI based polyester, which was much higher than that reported in literature for PBI based polymers in the solid state (\<1\%). Strong red fluorescent nanofibers of these polymers were successfully constructed by electrospinning technique. A random copolyester incorporating donor based on oligo(p-pheneylenevinylene) (OPV) and PBI as acceptor chromophore was also synthesized and fluorescence microscopy images of the electrospun fibers of this polymer exhibited blue, green and red emission upon excitation at different wavelengths. The high temperature solution blending approach involving a high molecular weight polymer and a suitably functionalized it conjugated molecule described here is a unique method by which 1D nanostructures of a wide range of pi-conjugated chromophores could be fabricated having strong fluorescence, with the scope of application in nanoscale optoelectronics, biological devices, as well as sensing.

}, keywords = {flexible film, fluorescent nanofibers, luminescent film, oligo(p-phenylenevinylene), perylene bisimide}, issn = {1944-8244}, doi = {10.1021/am502248u}, author = {Nisha, S. Kumari and Asha, S. K.} } @article { ISI:000342719500042, title = {Rapid access to benzoxaphospholes and their spiro analogues by a three-component coupling involving arynes, phosphines, and activated ketones}, journal = {Organic Letters}, volume = {16}, number = {19}, year = {2014}, month = {OCT}, pages = {5132-5135}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An operationally simple multicomponent coupling involving in situ generated arynes from 2 (trimethylsilyl)aryl triflates, phosphines, and various acyclic and cyclic activated carbonyl compounds has been developed. The reaction proceeds via a formal [3 + 2] cycloaddition mode giving access to differently substituted (spiro)benzoxaphosphole derivatives in moderate to good yields Mild reaction conditions. a broad scope. and the possibility of varying all the three-components are the notable features of the present reaction.

}, issn = {1523-7060}, doi = {10.1021/ol502490t}, author = {Bhunia, Anup and Roy, Tony and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article { ISI:000336442600003, title = {Rapid efficient synthesis and characterization of silver, gold, and bimetallic nanoparticles from the medicinal plant plumbago zeylanica and their application in biofilm control}, journal = {International Journal of Nanomedicine}, volume = {9}, year = {2014}, month = {MAY}, pages = {2635-2653}, publisher = {DOVE MEDICAL PRESS LTD}, address = {PO BOX 300-008, ALBANY, AUCKLAND 0752, NEW ZEALAND}, abstract = {

Background: Nanoparticles (NPs) have gained significance in medical fields due to their high surface-area-to-volume ratio. In this study, we synthesized NPs from a medicinally important plant - Plumbago zeylanica. Materials and methods: Aqueous root extract of P. zeylanica (PZRE) was analyzed for the presence of flavonoids, sugars, and organic acids using high-performance thin-layer chromatography (HPTLC), gas chromatography-time of flight-mass spectrometry (GC-TOF-MS), and biochemical methods. The silver NPs (AgNPs), gold NPs (AuNPs), and bimetallic NPs (AgAuNPs) were synthesized from root extract and characterized using ultraviolet-visible spectra, X-ray diffraction (XRD), energy-dispersive spectrometry (EDS), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The effects of these NPs on Acinetobacter baumannii, Staphylococcus aureus, and Escherichia coli biofilms were studied using quantitative biofilm inhibition and disruption assays, as well as using fluorescence, scanning electron microscopy, and atomic force microscopy. Results: PZRE showed the presence of phenolics, such as plumbagin, and flavonoids, in addition to citric acid, sucrose, glucose, fructose, and starch, using HPTLC, GC-TOF-MS, and quantitative analysis. Bioreduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) were confirmed at absorbances of 440 nm (AgNPs), 570 nm (AuNPs), and 540 nm (AgAuNPs), respectively. The maximum rate of synthesis at 50 degrees C was achieved with 5 mM AgNO3 within 4.5 hours for AgNPs; and with 0.7 mM HAuCl4 within 5 hours for AuNPs. The synthesis of AgAuNPs, which completed within 90 minutes with 0.7 mM AgNO3 and HAuCl4, was found to be the fastest. Fourier-transform infrared spectroscopy confirmed bioreduction, while EDS and XRD patterns confirmed purity and the crystalline nature of the NPs, respectively. TEM micrographs and DLS showed about 60 nm monodispersed Ag nanospheres, 20-30 nm Au nanospheres adhering to form Au nanotriangles, and about 90 nm hexagonal blunt-ended AgAuNPs. These NPs also showed antimicrobial and antibiofilm activity against E. coli, A. baumannii, S. aureus, and a mixed culture of A. baumannii and S. aureus. AgNPs inhibited biofilm in the range of 96\%-99\% and AgAuNPs from 93\% to 98\% in single-culture biofilms. AuNPs also showed biofilm inhibition, with the highest of 98\% in S. aureus. AgNPs also showed good biofilm disruption, with the highest of 88\% in A. baumannii. Conclusion: This is the first report on rapid and efficient synthesis of AgNPs, AuNPs and AgAuNPs from P. zeylanica and their effect on quantitative inhibition and disruption of bacterial biofilms.

}, keywords = {AgAuNPs, AgNPs, AuNPs, biofilm inhibition and disruption, GC-TOF-MS, P. zeylanica}, issn = {1178-2013}, doi = {10.2147/IJN.S59834}, author = {Salunke, Gayatri R. and Ghosh, Sougata and Kumar, R. J. Santosh and Khade, Samiksha and Vashisth, Priya and Kale, Trupti S. and Chopade, Snehal and Pruthi, Vikas and Kundu, Gopal and Bellare, Jayesh R. and Chopade, Balu Ananda} } @article { ISI:000336045800018, title = {Rationalizing the role of structural motif and underlying electronic structure in the finite temperature behavior of atomic clusters}, journal = {Journal of Chemical Physics}, volume = {140}, number = {15}, year = {2014}, month = {APR}, pages = {154307}, publisher = {AMER INST PHYSICS}, address = {CIRCULATION \& FULFILLMENT DIV, 2 HUNTINGTON QUADRANGLE, STE 1 N O 1, MELVILLE, NY 11747-4501 USA}, abstract = {

Melting in finite size systems is an interesting but complex phenomenon. Many factors affect melting and owing to their interdependencies it is a challenging task to rationalize their roles in the phase transition. In this work, we demonstrate how structural motif of the ground state influences melting transition in small clusters. Here, we report a case with clusters of aluminum and gallium having same number of atoms, valence electrons, and similar structural motif of the ground state but drastically different melting temperatures. We have employed Born-Oppenheimer molecular dynamics to simulate the solid-like to liquid-like transition in these clusters. Our simulations have reproduced the experimental trends fairly well. Further, the detailed analysis of isomers has brought out the role of the ground state structure and underlying electronic structure in the finite temperature behavior of these clusters. For both clusters, isomers accessible before cluster melts have striking similarities and does have strong influence of the structural motif of the ground state. Further, the shape of the heat capacity curve is similar in both the cases but the transition is more spread over for Al-36 which is consistent with the observed isomerization pattern. Our simulations also suggest a way to characterize transition region on the basis of accessibility of the ground state at a specific temperature. (C) 2014 AIP Publishing LLC.

}, issn = {0021-9606}, doi = {10.1063/1.4871118}, author = {Susan, Anju and Joshi, Kavita} } @article { ISI:000342254500047, title = {Reaction between lawsone and aminophenol derivatives: synthesis, characterization, molecular structures and antiproliferative activity}, journal = {Journal of Molecular Structure}, volume = {1075}, year = {2014}, month = {OCT}, pages = {397-405}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Reaction between two bioreductive reactants lawsone (2-hydroxy-1,4-napthoquinone) and derivatives 2-aminophenol without catalyst is reported. The reaction between lawsone and 4-chloro-2-aminophenol leads to formation of red colored major product 1A:[2-[(5-chloro-hydroxyphenyl)amino]naphthalene-1,4-dione] and fluorescent orange colored minor compound 1B:[10-chloro-benzo[alpha]phenoxazine-5-one]. Molecular structure of 1A and 1B were determined by single crystal X-ray diffraction. Two mechanisms were proposed to the formation of red 1A and 1B. {\textquoteleft}Ortho-para{\textquoteright} tautomeric equilibrium was observed in DMSO-d(6) solution in 1A, which was revealed by H-1, C-13 NMR and LC-MS studies. Molecules of 1A formed dimers via N-H center dot center dot center dot O interaction and polymeric chain of dimers was formed by OH center dot center dot center dot O interactions. Cl center dot center dot center dot Cl interactions were observed between the polymeric chains of dimers in 1A. Molecules of 1B show Cl center dot center dot center dot N interaction. Antiproliferative properties is studied for 1A-5A compounds (obtained by the reaction of lawsone with 2-amino-4-methylpheno1;2A, 2-aminopheno1;3A, 3-aminophenol;4A and 4-aminophenol;5A) and evaluated against two cancer cell lines, THP1 (human monocytic leukemia cells) and COLO205 (colorectal adenocarcinoma) and one normal cell line, HEK293T (human embryonic kidney). The values of 50\% inhibitory concentration (IC50) of compounds 1A-5A was determined using XTT assay. The cytotoxic effects of compounds 2A and 3A were observed against COLO205 and compounds 4A and 5A on THP1 were observed to be higher in comparison to their effect on HEK293T cell lines. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Aminonaphthoquinone, Aminophenol, Benzo[alpha]phenoxazine, Cl center dot center dot center dot N interactions, Lawsone, pi-pi stacking interaction}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2014.07.007}, author = {Kathawate, Laxmi and Joshi, Pranya V. and Dash, Tapan Kumar and Pal, Sanjima and Nikalje, Milind and Weyhermueller, Thomas and Puranik, Vedavati G. and Konkimalla, V. Badireenath and Salunke-Gawali, Sunita} } @article { ISI:000329385800009, title = {Reaction kinetics and modeling of photoinitiated cationic polymerization of an alicyclic based diglycidyl ether}, journal = {Nuclear Instruments \& Methods in Physics Research Section B-Beam Interactions with Materials and Atoms}, volume = {318}, number = {B}, year = {2014}, month = {JAN}, pages = {263-268}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Photoinitiated cationic polymerization of cycloaliphatic diepoxides had received tremendous attention, while studies with lesser polymerizable diglycidyl ethers are comparatively less reported. The present work deals with the photoinitiated cationic polymerization of cyclohexane dimethanol diglycidyl ether followed by estimation of kinetic parameters. The effects of concentration of photoinitiator and temperature on curing performance were studied using photo differential scanning calorimeter or photo DSC with polychromatic radiation. It was observed that the rate of polymerization as well as ultimate conversion increased with increasing concentration of photoinitiator and temperature. The influences of gelation as well as diffusional restrictions have remarkable effect on cure performance. The kinetic parameters as per autocatalytic kinetic model were studied by Levenberg-Marquardt nonlinear regression method instead of conventional linear method for obtaining more accurate values of apparent rate constant. It was observed that the model fits with data from initial stages to almost towards the end of the reaction. The activation energy was found to be higher than the values reported for more reactive cycloaliphatic diepoxides. The value of pre-exponential factor increased with increase in activation energy showing influence of gelation at early stages of reaction. (C) 2013 Elsevier B.V. All rights reserved.

}, keywords = {Autocatalytic model, kinetics, Levenberg-Marquardt method, Photopolymerization}, issn = {0168-583X}, doi = {10.1016/j.nimb.2013.10.004}, author = {Harikrishna, Reghunathan and Ponrathnam, S. and Tambe, S. S.} } @article { ISI:000344439400007, title = {Regioselective acylation of 2-methoxy naphthalene catalyzed by supported 12-phosphotungstic acid}, journal = {Applied Catalysis A-General}, volume = {486}, year = {2014}, month = {SEP}, pages = {55-61}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

12-Phosphotungstic acid supported on silica gel, zirconium sulfate, and a combination of silica gel and zirconium sulfate (50\% w/w) were employed as solid acid catalysts for regioselective acylation of 2-methoxynaphtalene with acetic anhydride. 1-(6-Methoxynaphthalen-2-yl)ethanone (2,6-AMN), a commercially important intermediate for production of Naproxen, was obtained with excellent selectivity (\>98\%) at 67-68\% conversion using 12-phosphotungstic acid supported on silica gel 20\% (w/w) in refluxing tetrachloroethane. The unreacted starting material can be easily separated from the product by a simple crystallization from nonane. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Acylation, Naproxen, Phosphotungstic acid, Silica gel, Supported, Zirconium sulfate}, issn = {0926-860X}, doi = {10.1016/j.apcata.2014.08.026}, author = {Kumaraguru, Thenkrishnan and Devi, Ayala Vedamayee and Siddaiah, Vidavalur and Rajdeo, Kishor and Fadnavis, Nitin W.} } @article {46363, title = {Relativistic equation-of-motion coupled-cluster method: application to closed-shell atomic systems}, journal = {Physical Review Applied}, volume = {89}, year = {2014}, month = {APR }, pages = {042510}, type = {Article}, abstract = {

We report our successful implementation of the relativistic equation-of-motion coupled-cluster (EOMCC) method. This method is employed to compute the principal ionization potentials (IPs) of closed-shell rare-gas atoms, He-like ions, Be-like ions, along with Na+, Al+, K+, Be, andMg. Four-component Dirac spinors are used in the calculations, and the one-and two-electron integrals are evaluated using the Dirac-Coulomb Hamiltonian. Our results are in excellent agreement with available measurements, which are taken from the National Institute of Science and Technology database. The accuracies of the calculations are estimated to be within one half of a percent for He-like and Be-like ions and 1\% for the heavier systems. We also present results using the second-order many-body perturbation theory and random-phase approximation in the EOMCC framework. These results are compared with those of EOMCC at the level of single and double excitations in order to assess the role of the electron correlation effects in the intermediate schemes considered in our calculations.

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.89.042510}, author = {Pathak, Himadri and Sahoo, B. K. and Das, B. P. and Vaval, Nayana and Pal, Sourav} } @article {42640, title = {Relativistic equation-of-motion coupled-cluster method for the double-ionization potentials of closed-shell atoms}, journal = {Physical Review A}, volume = {90}, year = {2014}, month = {JUL}, pages = {Article No. 010501}, doi = {10.1103/PhysRevA.90.010501}, author = {Pathak, Himadri and Ghosh, Aryya and Sahoo, B. K. and Das, B. P. and Vaval, Nayana and Pal, Sourav} } @article { ISI:000346385900016, title = {Relativistic equation-of-motion coupled-cluster method for the ionization problem: application to molecules}, journal = {Physical Review A}, volume = {90}, number = {6}, year = {2014}, month = {DEC}, pages = {Article No. 062501}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

We report the implementation of the four-component spinor relativistic equation-of-motion (EOM) coupled-cluster method within the single- and double-excitation approximation to calculate the ionization potential of molecules. We have applied this method to calculate vertical ionization potentials of the molecules XH (X = F, Cl, Br, I) along with Cl-2 and Br-2 in their closed-shell configuration. We have also presented intermediate results using the second-order many-body perturbation-theory level in the EOM framework to understand the role of electron correlation. All the calculated values are compared with the available experimental results. Our results are found to be in good agreement with sophisticated experiments, and relative deviation of less than 1\% is achieved for all the considered systems.

}, issn = {1050-2947}, doi = {10.1103/PhysRevA.90.062501}, author = {Pathak, Himadri and Sasmal, Sudip and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article { ISI:000341976100014, title = {Relativistic spectroscopy of plasma-embedded Li-like systems with screening effects in two-body Debye potentials}, journal = {Journal of Physics B-Atomic Molecular and Optical Physics}, volume = {47}, number = {17}, year = {2014}, month = {SEP}, pages = {175701}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

The spectroscopic properties of Li atoms and Li-like Ca and Ti ions in the plasma environment are investigated using a relativistic coupled-cluster (RCC) method. Assuming that the plasma is of low density and very hot, we consider the Debye model with two approximations to account for the screening effects: (i) in the nuclear potential alone and (ii) in both the nuclear and the electron-electron interaction potentials. Also, calculations for the energies and the lifetimes of the atomic states are carried out for plasma-free systems to check their accuracy, after which they are investigated in the plasma environment. It is observed that screenings in the electron-electron interaction potentials stabilize the systems more than when the screenings are present only in the nuclear potential. Similarly, the blue and red shifts in the Delta n = 0 and Delta n not equal 0 transition lines (with the principal quantum number n) of the Li-like ions observed in the (i) approximation are altered in the (ii) approximation. The level crossings among the energy levels are observed for large screening effects and are found to be prominent in the states of higher orbital angular momentum. The lifetimes of many low-lying states of the allowed transitions are estimated by considering different plasma screening strengths.

}, keywords = {atomic Spectroscopy, Debye model, relativistic method}, issn = {0953-4075}, doi = {10.1088/0953-4075/47/17/175701}, author = {Das, Madhulita and Sahoo, B. K. and Pal, Sourav} } @article { ISI:000327236600002, title = {Remarkable efficiency of a pin-II proteinase inhibitor sans two conserved disulfide bonds is due to enhanced flexibility and hydrogen bond density in the reactive site loop}, journal = {Journal of Biomolecular Structure \& Dynamics}, volume = {32}, number = {1}, year = {2014}, month = {JAN}, pages = {13-26}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

Capsicum annuum (L.) expresses diverse potato type II family proteinase inhibitors comprising of inhibitory repeat domain (IRD) as basic functional unit. Most IRDs contain eight conserved cysteines forming four disulfide bonds, which are indispensible for their stability and activity. We investigated the functional significance of evolutionary variations in IRDs and their role in mediating interaction between the inhibitor and cognate proteinase. Among the 18 IRDs encoded by C. annuum, IRD-7, -9, and -12 were selected for further characterization on the basis of variation in their reactive site loop, number of conserved cysteine residues, and higher theoretical G(bind) for interaction with Helicoverpa armigera trypsin. Moreover, inhibition kinetics showed that IRD-9, despite loss of some of the disulfide bonds, was a more potent proteinase inhibitor among the three selected IRDs. Molecular dynamic simulations revealed that serine residues in the place of cysteines at seventh and eighth positions of IRD-9 resulted in an increase in the density of intramolecular hydrogen bonds and reactive site loop flexibility. Results of the serine residues chemical modification also supported this observation and provided a possible explanation for the remarkable inhibitory potential of IRD-9. Furthermore, this natural variant among IRDs showed special attributes like stability to proteolysis and synergistic inhibitory effect on other IRDs. It is likely that IRDs have coevolved selective specialization of their structure and function as a response towards specific insect proteases they encountered. Understanding the molecular mechanism of pest protease-plant proteinaceous inhibitor interaction will help in developing effective pest control strategies.An animated interactive 3D complement (I3DC) is available in Proteopedia at http://proteopedia.org/w/Journal:JBSD:39

}, keywords = {Capsicum annuum, Helicoverpa armigera, Proteases, Proteinase inhibitor}, issn = {0739-1102}, doi = {10.1080/07391102.2012.745378}, author = {Joshi, Rakesh S. and Mishra, Manasi and Tamhane, Vaijayanti A. and Ghosh, Anirban and Sonavane, Uddhavesh and Suresh, C. G. and Joshi, Rajendra and Gupta, Vidya S. and Giri, Ashok P.} } @article { ISI:000339661100021, title = {Remote trap passivation in colloidal quantum dot bulk nano-heterojunctions and its effect in solution-processed solar cells}, journal = {Advanced Materials}, volume = {26}, number = {27}, year = {2014}, month = {JUL}, pages = {4741+}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

More-efficient charge collection and suppressed trap recombination in colloidal quantum dot (CQD) solar cells is achieved by means of a bulk nano-heterojunction (BNH) structure, in which p-type and n-type materials are blended on the nanometer scale. The improved performance of the BNH devices, compared with that of bilayer devices, is displayed in higher photocurrents and higher open-circuit voltages (resulting from a trap passivation mechanism).

}, issn = {0935-9648}, doi = {10.1002/adma.201400297}, author = {Rath, Arup Kumar and Pelayo Garcia de Arquer, F. and Stavrinadis, Alexandros and Lasanta, Tania and Bernechea, Maria and Diedenhofen, Silke L. and Konstantatos, Gerasimos} } @article { ISI:000343747200015, title = {Removal of carbonate ion through cellulose fiber supported solid membrane}, journal = {Journal of Engineered Fibers and Fabrics}, volume = {9}, number = {2}, year = {2014}, month = {JAN}, pages = {120-126}, publisher = {INDA}, type = {Article}, address = {PO BOX 1288, CARY, NC 27512-1288 USA}, abstract = {

A novel fiber supported solid membrane was prepared by chemical modification of cellulose fiber with tartaric acid, 8-hydroxyquinoline and magnesium carbonate for removal of bicarbonate ion. Loading effect of tartaric acid, magnesium metal ion and 8-hydroxyquinoline over cellulose fiber was studied for removal of carbonate ion. The selective removal of carbonate, sulfate, phosphate, and nitrate ions through fiber supported solid membrane was investigated. The removal of carbonate ion with/without bubbling of CO2 was determined in source and receiving phases.

}, issn = {1558-9250}, author = {Gaikwad, Abaji G.} } @article { ISI:000343023900010, title = {Resistance through inhibition: ectopic expression of serine protease inhibitor offers stress tolerance via delayed senescence in yeast cell}, journal = {Biochemical and Biophysical Research Communications}, volume = {452}, number = {3}, year = {2014}, month = {SEP}, pages = {361-368}, publisher = {ACADEMIC PRESS INC ELSEVIER SCIENCE}, address = {525 B ST, STE 1900, SAN DIEGO, CA 92101-4495 USA}, abstract = {

Protease inhibitors have been known to confer multiple stress tolerance in transgenic plants. We have assessed growth of yeast (Pichia pastoris GS115) strains expressing inhibitory repeat domains (PpIRD(+)) of previously characterized Capsicum annuum protease inhibitors under high salt, heavy metal and oxidative stress. PpIRD(+) strains exhibited multiple stress tolerance and showed differential molecular responses at transcriptional and translational level on exposure to stress inducing agents like heavy metal, high salt and H2O2. PpIRD(+) strains display significant reduction in metacaspase (Yca1) activity, the key enzyme in apoptosis, indicates the possibility of cross reactivity of IRDs (serine protease inhibitor) with cysteine proteases. PpIRD(+) and Saccharomyces cerevisiae knockout with Yca1 (Delta Yca1) strain showed similar growth characteristics under stress, which indicated the delayed senescence due to cellular metacaspase inhibition. Molecular docking study showed a close proximity of IRDs reactive site and the active site of metacaspase in the complex that signified their strong interactions. Maintenance of GAPDH activity, primary target of metacaspase, in PpIRD(+) strain evidenced the inhibition of metacaspase activity and survival of these cells under stress. This report demonstrates a potential molecular mechanism of protease inhibitor-based multiple stress tolerance in yeast strains. (C) 2014 Elsevier Inc. All rights reserved.

}, keywords = {Metacaspase, Multiple stress tolerance, protease inhibitor, Yeast}, issn = {0006-291X}, doi = {10.1016/j.bbrc.2014.08.075}, author = {Joshi, Rakesh S. and Tanpure, Rahul S. and Singh, Rajan Kumar and Gupta, Vidya S. and Giri, Ashok P.} } @article { ISI:000347498500067, title = {Resistance to ionic pt insertion in oxygen excess LaMnO3 perovskite lattices and its effect in water gas shift reaction}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {395}, year = {2014}, month = {DEC}, pages = {534-542}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Pt doped and impregnated LaMnO3 perovskites are synthesized at different temperatures and Pt and Mn states are compared in an attempt to get insight into extent of lattice incorporation of Pt in perovskite. Various characterization studies indicate that oxygen excess system like LaMnO3 presents substantial resistance to B site doping with Pt. This behavior is different from other oxygen deficient perovskites like LaCoO3 and LaFeO3 in which lattice incorporation stabilizes the active species against sintering. Water gas shift reaction was used as a probe reaction to understand the effect of this difference in the activity. In case of LaMnO3, failure in lattice substitution leads to sintering and deactivation at high synthesis temperatures (\>= 700 degrees C) in both impregnated and doped samples. In doped samples, however, a strong interaction of Pt species with a persistent amorphous phase prevents sintering at lower synthesis temperature thereby enhancing the activity when compared to impregnated sample. The study reveals a possible mechanism in which only Pt(0) species is active with perovskite playing a minimal role in this system due to the resistance to lattice incorporation. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Oxygen excess, Perovskites, Water gas shift reaction, XPS, XRD}, issn = {1381-1169}, doi = {10.1016/j.molcata.2014.08.042}, author = {Rajesh, Thattarathody and Devi, R. Nandini} } @article { ISI:000342883100029, title = {Rhodococcus enclensis sp nov., a novel member of the genus rhodococcus}, journal = {International Journal of Systematic and Evolutionary Microbiology}, volume = {64}, number = {8}, year = {2014}, month = {AUG}, pages = {2693-2699}, publisher = {SOC GENERAL MICROBIOLOGY}, address = {MARLBOROUGH HOUSE, BASINGSTOKE RD, SPENCERS WOODS, READING RG7 1AG, BERKS, ENGLAND}, abstract = {

A novel actinobacterial strain, designated, NIO-1009(T), was isolated from a marine sediment sample collected from Chorao Island, Goa, India. Phylogenetic analysis comparisons based on 16S rRNA gene sequences between strain MO-1009(T) and other members of the genus Rhodococcus revealed that strain NI0-1009(T) had the closest sequence similarity to Rhodococcus kroppenstedtii DSM 44908(T) and Rhodococcus corynebacterioides DSM 20151(T) with 99.2 and 99.1\%, respectively. Furthermore, DNA-DNA hybridization results showed that R. kroppenstedtii DSM 44908(T) and R. corynebacterioides DSM 20151(T) were 39.5 (3.0\%) and 41.7 (2.0\%) with strain NIO-1009(T), respectively, which were well below the 70\% limit for any novel species proposal. Phylogenetically strain NIO-1009(T) forms a stable clade with and R. kroppenstedtii DSM 44908(T) and R. corynebacterioides DSM 201511 with 100\% bootstrap values. Strain NI-1009(T) contained meso-diaminopimelic acid as the diagnostic diamino acid and galactose and arabinose as the cell wall sugars. The major fatty acids were C-16:0, C-18:1 omega 9c, C-16:1(omega 6C and/or omega 7c) and 10-methyl C-18:0. The only menaquinone detected was MK-8(H-2), while the major polar lipids were diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylglycerol, phosphatidylinositol, phosphatidylinositol mannoside and one unknown phospholipid. The G + C content of the genomic DNA was 66.9 molok. The phenotypic and genotypic data showed that strain NIO-1009(T) warrants recognition as a novel species of the genus Rhodococcus for which the name Rhodococcus enclensis sp. nov., is proposed; the type strain is NIO-1009(T) (=NCIM 5452(T)=DSM 45688(T)).

}, issn = {1466-5026}, doi = {10.1099/ijs.0.061390-0}, author = {Dastager, Syed Gulam and Mawlankar, Rahul R. and Tang, Shan-Kun and Krishnamurthi, Srinivasan and Ramana, V. Venkata and Joseph, Neeta and Shouche, Yogesh S.} } @article { ISI:000327155500005, title = {Role of additives in chiral amine-catalyzed direct aldol reaction}, journal = {Synthetic Communications}, volume = {44}, number = {3}, year = {2014}, month = {FEB}, pages = {352-360}, publisher = {TAYLOR \& FRANCIS INC}, address = {325 CHESTNUT ST, SUITE 800, PHILADELPHIA, PA 19106 USA}, abstract = {

A systematic study of chiral adducts derived from amines as catalysts for aldol reaction revealed that enantioselective outcome depends on the chiral enamine intermediate and not the face-selective activation of aldehyde. A simple addition compound of proline and 8-hydroxy quinoline was found to be a good catalyst. [Supplementary materials are available for this article. Go to the publisher{\textquoteright}s online edition of Synthetic Communications (R) for the following free supplemental resource(s): Full experimental and spectral details.]

}, keywords = {Additives, Aldol reaction, chiral amines, organocatalyst, pyrrolidine-catalyzed}, issn = {0039-7911}, doi = {10.1080/00397911.2013.805231}, author = {Sutar, R. L. and Joshi, Navalkishore N.} } @article { ISI:000340427600012, title = {Role of cation-anion cooperation in the selective synthesis of glycidol from glycerol using DABCO-DMC ionic liquid as catalyst}, journal = {RSC Advances}, volume = {4}, number = {61}, year = {2014}, month = {JUL}, pages = {32127-32133}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Transesterification of dimethyl carbonate with glycerol has been investigated using 1,4-diazabicyclo [2.2.2] octane (DABCO) based ionic liquid as a catalyst. DABCO reacted with dimethyl carbonate to form ionic liquid as the reaction progressed. Though the basicity of DABCO based ionic liquid was lower than that of DABCO, the catalytic activity and selectivity to glycidol was higher with DABCO based ionic liquid as a catalyst, indicating that basicity may not be the only criterion in deciding activity and selectivity of the reaction. The cooperative effect of the cation and anion of the ionic liquid is responsible for the observed results. The best results (97\% glycerol conversion with 83\% selectivity to glycidol and 17\% selectivity to glycerol carbonate) were obtained using DABCO based ionic liquid as a catalyst. A plausible mechanism involving the role of both the cation and anion of the ionic liquid has been proposed.

}, issn = {2046-2069}, doi = {10.1039/c4ra04290e}, author = {Munshi, Mudassir K. and Gade, Swapna M. and Rane, Vilas H. and Kelkar, Ashutosh A.} } @article { ISI:000343847000023, title = {Role of G-quadruplex located at 5 end of mRNAs}, journal = {Biochimica Et Biophysica Acta-General Subjects}, volume = {1840}, number = {12}, year = {2014}, month = {DEC}, pages = {3503-3510}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Background: Secondary structures in 5{\textquoteright} UTR of mRNAs play a critical role in regulating protein synthesis. Though studies have indicated the role of secondary structure G-quadruplex in translational regulation, position-specific effect of G-quadruplex in naturally occurring mRNAs is still not understood. As a pre-initiation complex recognises 5{\textquoteright} cap of the mRNA and scans along the untranslated region (UTR) before initiating translation, the presence of G-quadruplex in 5{\textquoteright} region may have a significant contribution in regulating translation. Here, we investigate the role of G-quadruplex located at the 5{\textquoteright} end of an mRNA. Methods: Biophysical characterisation of putative G-quadruplexes was performed using UV and CD spectroscopy. Functional implication of G-quadruplex in the context of their location was assessed in cellulo using gRT-PCR and dual luciferase assay system. Results: PG4 sequences in 5{\textquoteright} UTR of AICT interacting protein (AKTIP), cathepsin B (CTSB) and forkhead box E3 (FOXE3) mRNAs form G-quadruplex whereas it is unable to form G-quadruplex in apolipoprotein A-I binding protein (APOA1BP). Our results demonstrated diverse roles of G-quadruplex located at 5{\textquoteright} end of mRNAs. Though G-quadruplex in AKTIP and CTSB mRNA act as inhibitory modules, it activates translation in FOXE3 mRNA. Conclusions: Our works suggests that G-quadruplex present at the 5{\textquoteright} terminal of an mRNA behaves differently in a different gene context. It can activate or inhibit gene expression. General significance: This study demonstrated that it is difficult to predict the role of G-quadruplex on the basis of its position in 5{\textquoteright} UTR. The neighbouring nucleotide sequence, the intracellular milieu and the interacting partners might render diverse functions to this secondary structure. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {AKTIP, APOA1BP, CTSB, FOXE3, G-quadruplex, UTR}, issn = {0304-4165}, doi = {10.1016/j.bbagen.2014.08.017}, author = {Agarwala, Prachi and Pandey, Satyaprakash and Maiti, Souvik} } @article {46379, title = {Role of hydrogen bonding in pseudocapacitance of covalent organic frameworks}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {70}, year = {2014}, month = {MAR}, pages = {C1149}, type = {Meeting Abstract}, keywords = {COF, H-bonding, pseudocapacitance}, issn = {2053-2733}, author = {Chandra, Suman and Banerjee, Rahul} } @article { ISI:000336899800007, title = {Role of iron oxide impurities in electrocatalysis by multiwall carbon nanotubes: An investigation using a novel magnetically modified ITO electrodes}, journal = {Bulletin of Materials Science}, volume = {37}, number = {2}, year = {2014}, month = {APR}, pages = {221-226}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

The role of iron oxide impurities in the electrocatalytic properties of multiwall carbon nanotubes (MWCNTs) prepared by catalytic chemical vapour decomposition method (CCVD) is studied in detail. A novel magnetically modified electrodes have been developed by which MWCNTs were immobilized on indium-tin oxide (ITO) electrodes, without any chemical binders. The electro-catalytic oxidation of dopamine, and reduction of hydrogen peroxide have been studied by cyclic voltammetry on magnetically modified electrodes with (i) MWCNTs with occluded iron oxide impurities (Fe-MWCNTs), (ii) MWCNTs grown on iron oxide nanoparticle particulate films (Io-MWCNTs) and (iii) pristine iron oxide nanoparticle particulate film (Io-NPs). A shift towards less positive potentials for the oxidation of dopamine was observed which is in the order of Fe-MWCNTs \< Io-MWCNTs \< Io-NPs. Similarly, trend towards less negative potentials for the reduction of hydrogen peroxide was observed. Thus, the electrocatalytic activities displayed by MWCNTs have been attributed to the iron oxide impurities associated with it. The systematic variation was related to the nature of interaction of iron oxide nanoparticles with MWCNT surface.

}, keywords = {dopamine, Hydrogen peroxide, iron oxide nanoparticles, magnetically-modified electrode, Multiwall carbon nanotubes (MWCNTs)}, issn = {0250-4707}, author = {Samant, Kanchan M. and Joshi, Vrushali S. and Patil, Kashinath R. and Haram, Santosh K.} } @article { ISI:000344330800015, title = {Role of nanointerfaces in Cu- and Cu plus Au-based near-ambient-temperature CO oxidation catalysts}, journal = {ChemCatChem}, volume = {6}, number = {11}, year = {2014}, month = {NOV}, pages = {3116-3124}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Disordered mesoporous Cu-doped ceria-zirconia (Cu0.1Ce0.85Zr0.05O2), and gold deposited (Au/Cu0.1Ce0.85Zr0.05O2) catalysts were synthesized and evaluated for CO oxidation. Onset of CO oxidation activity, and 50\% (100\%) CO2 formation occurs at room temperature (RT), and 77 (120)degrees C, respectively, with Cu0.1Ce0.85Zr0.05O2. A small amount of gold on Cu0.1Ce0.85Zr0.05O2 induces the sustainable oxidation catalysis around RT. Onset of copper reduction temperature decreases from 110 degrees C on Cu0.1Ce0.85Zr0.05O2 to 48 degrees C with Au/Cu0.1Ce0.85Zr0.05O2, highlighting the direct interaction between Cu and Au through a Cu-Au interface. Au particles with a (00 1) facet deposit on an oxygen-deficient site of (111) facet of CeO2-ZrO2. Any decrease in surface Cu-content with increasing Au-content further supports the Au-Cu-Ce/Zr interface interactions. Nanointerfaces of Au clusters on Cu next to oxygen-deficient sites of CeO2-ZrO2 facilitate all the elementary steps of the CO + O-2 reaction to occur in close proximity at ambient conditions.

}, keywords = {carbon monoxide, Gold, heterogeneous catalysis, Oxidation, redox}, issn = {1867-3880}, doi = {10.1002/cctc.201402581}, author = {Gnanakumar, Edwin S. and Naik, Jarpla Madhusudhan and Manikandan, Marimuthu and Raja, Thirumalaiswamy and Gopinath, Chinnakonda S.} } @article { ISI:000341619500016, title = {Role of oxygen vacancies in water gas shift reaction: activity study on BaCe0.98-xYxPt0.02O3-delta perovskites}, journal = {Journal of Physical Chemistry C}, volume = {118}, number = {36}, year = {2014}, month = {SEP}, pages = {20867-20874}, publisher = {AMER CHEMICAL SOC}, type = {Article}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Oxygen vacancies are suggested to play an important role in reactions like water gas shift where the redox mechanism is crucial. Pt-doped BaCeO3 perovskite, moderately active for water gas shift reaction, is selected for further understanding the role of oxygen vacancies, since perovskite lattice can tolerate and stabilize vacancies facilitating an accurate quantification. Vacancies are created in the system by systematic doping of increasing amounts of Y. Structure and activity studies reveal that the 6\% Y-substituted compound which has the most symmetric B site coordination environment exhibits the highest activity. Hence, it is not the extent of vacancies but their structural characteristics which are found to be decisive. Symmetric coordination around B ions facilitates water adsorption and dissociation by lowering the energy barriers due to the creation of an isotropic environment.

}, issn = {1932-7447}, doi = {10.1021/jp503922x}, author = {Rajesh, Thattarathody and Devi, R. Nandini} } @article { ISI:000350657700011, title = {Role of structure and entropy in determining differences in dynamics for glass formers with different interaction potentials}, journal = {Physical Review Letters}, volume = {113}, number = {22}, year = {2014}, month = {NOV}, pages = {225701}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

We present a study of two model liquids with different interaction potentials, exhibiting similar structure but significantly different dynamics at low temperatures. By evaluating the configurational entropy, we show that the differences in the dynamics of these systems can be understood in terms of their thermodynamic differences. Analyzing their structure, we demonstrate that differences in pair correlation functions between the two systems, through their contribution to the entropy, dominate the differences in their dynamics, and indeed overestimate the differences. Including the contribution of higher order structural correlations to the entropy leads to smaller estimates for the relaxation times, as well as smaller differences between the two studied systems.

}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.113.225701}, author = {Banerjee, Atreyee and Sengupta, Shiladitya and Sastry, Srikanth and Bhattacharyya, Sarika Maitra} } @article { ISI:000330953700014, title = {Roseovarius azorensis sp nov., isolated from seawater at espalamaca, azores}, journal = {Antonie van Leeuwenhoek International Journal of General and Molecular Microbiology}, volume = {105}, number = {3}, year = {2014}, month = {MAR}, pages = {571-578}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A Gram-negative, motile, non-spore forming, rod shaped aerobic bacterium, designated strain SSW084(T), was isolated from a surface seawater sample collected at Espalamaca (38A degrees 33{\textquoteright}N; 28A degrees 39{\textquoteright}W), Azores. Growth was found to occur from 15 to 40 A degrees C (optimum 30 A degrees C), at pH 7.0-9.0 (optimum pH 7.0) and with 25-100 \% seawater or 0.5-7.0 \% NaCl in the presence of Mg2+ and Ca2+; no growth was found with NaCl alone. Colonies on seawater nutrient agar were observed to be punctiform, white, convex, circular, smooth, and translucent. Strain SSW084(T) did not grow on Zobell marine agar and tryptic soy agar even when seawater supplemented. The major respiratory quinone was found to be Q-10 and the G + C content was determined to be 61.9 mol\%. Phylogenetic analysis based on the 16S rRNA gene sequence indicated that strain SSW084(T) belongs to the genus Roseovarius and that its closest neighbours are Roseovarius tolerans EL-172(T), Roseovarius mucosus DFL-24(T) and Roseovarius lutimaris 112(T) with 95.7, 95.4 and 95.3 \% sequence similarity respectively. The remaining species of Roseovarius showed \< 95 \% similarity. The polar lipids of strain SSW084(T) were determined to be phosphatidylethanolamine, diphosphatidylglycerol, phosphatidylglycerol, phosphatidylcholine, an unidentified lipid and one unidentified aminolipid. The major fatty acids identified were identified as C-18:1 omega 7c (52.5 \%) and C-16:0 (13.8 \%). On the basis of phenotypic, molecular and chemotaxonomic characteristics, strain SSW084(T) is considered to represent a novel species of the genus Roseovarius, for which Roseovarius azorensis sp. nov is proposed. The type strain is SSW084(T) (=KCTC 32421(T) = MTCC 11812(T)).

}, keywords = {Espalamaca, Polyphasic taxonomy, Roseovarius azorensis sp nov, Seawater}, issn = {0003-6072}, doi = {10.1007/s10482-013-0109-9}, author = {Rajasabapathy, Raju and Mohandass, Chellandi and Dastager, Syed Gulam and Liu, Qing and Thi-Nhan Khieu and Chu Ky Son and Li, Wen-Jun and Colaco, Ana} } @article { ISI:000337742600003, title = {Ru-catalyzed branched versus linear selective C3-alkylation of 2-aroylbenzofurans with acrylates via C-H activation}, journal = {Chemistry-A European Journal}, volume = {20}, number = {26}, year = {2014}, month = {JUN}, pages = {7884-7889}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

The carbonyl-directed C3-H activation and alkylation of 2-aroylbenzo[b]furans with acrylates occurs selectively either in a linear or branched fashion, depending on the catalyst employed; [Ru(p-cymene)Cl-2](2) or Ru(PPh3)(3)Cl-2, respectively. Two alternate pathways-funded upon the differences in steric and electronic preferences of these two complexes-is proposed for the selectivity of linear versus branched products.

}, keywords = {acrylate, benzo[b]furan, branched-selective alkylation, C-H activation, ruthenium}, issn = {0947-6539}, doi = {10.1002/chem.201400401}, author = {Kommagalla, Yadagiri and Srinivas, Kolluru and Ramana, Chepuri V.} } @article { ISI:000356324000001, title = {Radical-mediated dehydrative preparation of cyclic imides using (NH4)(2)S2O8-DMSO: application to the synthesis of vernakalant}, journal = {Beilstein Journal of Organic Chemistry}, volume = {11}, year = {2015}, month = {JUN}, pages = {1008-1016}, publisher = {BEILSTEIN-INSTITUT}, address = {TRAKEHNER STRASSE 7-9, FRANKFURT AM MAIN, 60487, GERMANY}, abstract = {

Ammonium persulfate-dimethyl sulfoxide (APS-DMSO) has been developed as an efficient and new dehydrating reagent for a convenient one-pot process for the synthesis of miscellaneous cyclic imides in high yields starting from readily available primary amines and cyclic anhydrides. A plausible radical mechanism involving DMSO has been proposed. The application of this facile one-pot imide forming process has been demonstrated for a practical synthesis of vernakalant.

}, keywords = {APS-DMSO, imides, practical synthesis, radical-mediated, vernakalant}, issn = {1860-5397}, doi = {10.3762/bjoc.11.113}, author = {Garad, Dnyaneshwar N. and Tanpure, Subhash D. and Mhaske, Santosh B.} } @article { ISI:000365891600061, title = {Ranking of reactions based on sensitivity of protein noise depends on the choice of noise measure}, journal = {Plos One}, volume = {10}, number = {12}, year = {2015}, month = {DEC}, pages = {Article Number: e0143867}, publisher = {PUBLIC LIBRARY SCIENCE}, address = {1160 BATTERY STREET, STE 100, SAN FRANCISCO, CA 94111 USA}, abstract = {

Gene expression is a stochastic process. Identification of the step maximally affecting noise in the protein level is an important aspect of investigation of gene product distribution. There are numerous experimental and theoretical studies that seek to identify this important step. However, these studies have used two different measures of noise, viz. coefficient of variation and Fano factor, and have compared different processes leading to contradictory observations regarding the important step. In this study, we performed systematic global and local sensitivity analysis on two models of gene expression to investigate relative contribution of reaction rate parameters to steady state noise in the protein level using both the measures of noise. We analytically and computationally showed that the ranking of parameters based on the sensitivity of the noise to variation in a given parameter is a strong function of the choice of the noise measure. If the Fano factor is used as the noise measure, translation is the important step whereas for coefficient of variation, transcription is the important step. We derived an analytical expression for local sensitivity and used it to explain the distinct contributions of each reaction parameter to the two measures of noise. We extended the analysis to a generic linear catalysis reaction system and observed that the reaction network topology was an important factor influencing the local sensitivity of the two measures of noise. Our study suggested that, for the analysis of contributions of reactions to the noise, consideration of both the measures of noise is important.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0143867}, author = {Gokhale, Sucheta A. and Gadgil, Chetan J.} } @article {42925, title = {Rapid characterization of oxidative deterioration in edible oil by optical photospectrometry}, journal = {Journal of Food and Dairy Technology}, volume = {3}, year = {2015}, month = {APR}, abstract = {

This research work aimed to investigate the kinetic reaction of reused cooking oil and find the optimum conditions of its process. The feedstock was collected from the commercially available sunflower oil. Our investigation shows that the kinetic reaction of reused sunflower oil (auto-oxidation) obtained in terms of variation of absorption coefficient of unexposed sunflower as 0.05 while the exposed sunflower had 0.075. The optimum condition from optical absorption spectroscopy investigations were obtained as 0.267 for unexposed sunflower oil and 0.194 for exposed sunflower oil at room temperature. Furthermore, our FTIR spectroscopic results obtained are accurate and precise enough for such detection such as free fatty acid (FFA ~ 26\%), acid ~ 53\% and saponification ~ 192\% get reduce in exposed oil was investigated.

}, author = {More, Pravin S. and Shelke, Anil V. and Late, Dattatray J.} } @article { ISI:000362679300035, title = {Rapid conductometric sensor for the analysis of cyanide using imidazole based receptor}, journal = {Physical Chemistry Chemical Physics}, volume = {17}, number = {40}, year = {2015}, month = {SEP}, pages = {26790-26796}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A specific and efficient hydrogen bonding interaction between cyanide and the HN-H [imidazole] in an aqueous medium has been utilized for the selective recognition of cyanide under physiological conditions. The possibility of utilizing such an interaction for developing any practical device for the specific detection of cyanide in an aqueous environment has not been explored to date. We now report a simple dip and read conductometric sensor for cyanide ions using a tailored electrode in aqueous media. The purpose built reagent, 2-phenyl-1H-anthra-[2,3-d]-immidazole-5,10 dione was immobilized in a polyaniline matrix to fabricate this conductometric device. The homogeneous immobilization of the receptor in polyaniline was confirmed by FT-IR mapping. The proposed transduction mechanism is charge neutralization on the polyaniline moiety, which ultimately inhibits the protonation resulting in a decrease in the conductance of polyaniline. The sensor response was measured in three ranges of cyanide concentration (10(-10) M to 10(-8) M; 10(-8) M to 10(-6) M and 10(-6) M to 10(-3) M). Whereas the device is found insensitive in the first range, it acts as a detector in the second range and as a proportional sensor in the third range. The minimum detection limit of this device was found to be 10 nmol L-1 (2.6 ppt), which is significantly less than the WHO guideline values. The responses have been investigated under various conditions such as different pH and the electrochemical state of the polymer. The current device has been found to be better close to neutral pH and at a 400 mV vs. Ag/AgCl potential. The reproducibility and repeatability of the sensor was investigated and interference studies were performed.

}, issn = {1463-9076}, doi = {10.1039/c5cp03773e}, author = {Paul, Anirban and Perween, Mosarrat and Saha, Sukdeb and Srivastava, Divesh N. and Das, Amitava} } @article { ISI:000356515900042, title = {Rational approach towards enhancing solar water splitting: a case study of Au-RGO/N-RGO-TiO2}, journal = {Nanoscale}, volume = {7}, number = {25}, year = {2015}, month = {MAY}, pages = {11206-11215}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A rational approach was employed to enhance the solar water splitting (SWS) efficiency by systematically combining various important factors that helps to increase the photocatalytic activity. The rational approach includes four important parameters, namely, charge generation through simulated sunlight absorption, charge separation and diffusion, charge utilization through redox reaction, and the electronic integration of all of the above three factors. The complexity of the TiO2 based catalyst and its SWS activity was increased systematically by adding reduced graphene oxide (RGO) or N-doped RGO and/or nanogold. Au-N-RGO-TiO2 shows the maximum apparent quantum yield (AQY) of 2.46\% with a H-2 yield (525 mu mol g(-1) h(-1)) from aqueous methanol, and overall water splitting activity (22 mu mol g(-1) h(-1); AQY = 0.1\%) without any sacrificial agent under one sun conditions. This exercise helps to understand the factors which help to enhance the SWS activity. Activity enhancement was observed when there is synergy among the components, especially the simulated sunlight absorption (or one sun conditions), charge separation/conduction and charge utilization. Electronic integration among the components provides the synergy for efficient solar light harvesting. In our opinion, the above synergy helps to increase the overall utilization of charge carriers towards the higher activity.

}, issn = {2040-3364}, doi = {10.1039/c5nr02613j}, author = {Bharad, Pradnya A. and Sivaranjani, Kumarsrinivasan and Gopinath, Chinnakonda S.} } @article { ISI:000362890300003, title = {Rational drug design, synthesis and biological evaluation of dihydrofolate reductase inhibitors as antituberculosis agents}, journal = {Future Medicinal Chemistry}, volume = {7}, number = {8}, year = {2015}, month = {JUN}, pages = {979-988}, publisher = {FUTURE SCI LTD}, address = {UNITED HOUSE, 2 ALBERT PL, LONDON, N3 1QB, ENGLAND}, abstract = {

Background: A series of 2,4-diamino-s-triazines was designed, with potential for activity against Mycobacterium tuberculosis (Mtb) dihydrofolate reductase enzyme, on the basis of virtual screening results and structure-based drug design. Results: The compounds were evaluated against Mtb (H(37)Rv) and their cytotoxicity was assessed using VERO cell lines. Of particular note, two compounds were found to have the most promising antituberculosis activity (6b minimum inhibitory concentration: 1.76 mu M and 6i minimum inhibitory concentration: 1.57 mu M) along with low cytotoxicity (CC50 : \> 300 mu M). The enzyme assay results of these two indicated significant inhibition of Mtb dihydrofolate reductase along with selectivity. Selected derivatives were tested against dormant tubercle bacilli in vivo and ex vivo indicating potential inhibition. Conclusion: This study provides promising antituberculosis dihydrofolate reductase inhibitors that can act as potential leads for further development.

}, issn = {1756-8919}, doi = {10.4155/FMC.15.48}, author = {Tawari, Nilesh R. and Bag, Seema and Raju, Archana and Lele, Arundhati C. and Bairwa, Ranjeet and Ray, Mukti Kanta and Rajan, M. G. R. and Nawale, Laxman U. and Sarkar, Dhiman and Degani, Mariam S.} } @article { ISI:000343686900002, title = {Rational preparation of Ag and Au bimetallic catalysts for the hydrocarbon-SCR of NOx: sequential deposition vs. coprecipitation method}, journal = {Applied Catalysis B-Environmental}, volume = {162}, year = {2015}, month = {JAN}, pages = {11-20}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

This study emphasizes the importance of the preparation method for bimetallic Au-Ag catalysts supported on alumina in the selective reduction of NOx by hydrocarbons with gas feed compositions representative of diesel fuelled engine exhaust gas. An optimal balance between oxidative and reductive surface properties is obtained when Au and Ag are successively introduced. Significant re-dispersion processes take place when the catalyst runs at 500 degrees C leading to a gain in activity at low temperature and ascribed to a better interaction between Au and Ag species. Co-precipitation leads to a preferential formation of intermetallic Au-Ag particles which is detrimental to the catalytic performances. Aging at 500 degrees C leads to a significant particle sintering and a strengthening of the metallic character. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Au-Ag particles, Co-precipitation, DeNO(x) reaction, HC-SCR}, issn = {0926-3373}, doi = {10.1016/j.apcatb.2014.06.031}, author = {More, Pavan M. and Nguyen, D. L. and Dongare, Mohan K. and Shubhangi B. Umbarkar and Nuns, N. and Girardon, J. S. and Dujardin, Christophe and Lancelot, Christine and Mamede, Anne-Sophie and Granger, P.} } @article {42433, title = {Reaction of N-heterocyclic carbenes with chalcones leading to the synthesis of deoxy-breslow intermediates in their oxidized form}, journal = {Chemical Communications}, volume = {51}, year = {2015}, month = {JUL}, pages = {13690-13693}, abstract = {

The synthesis of deoxy-Breslow intermediates in their oxidized form has been developed\ via\ the reaction of N-heterocyclic carbenes (NHCs) with chalcones. Moreover, the initial tetrahedral adduct formed from the 1,4-addition of NHCs to chalcones is also isolated.

}, doi = {10.1039/C5CC05800G}, author = {Bhunia, Anup and Thorat, Shridhar H. and Gonnade, Rajesh G. and Biju, Akkattu T.} } @article { ISI:000356753600002, title = {Reactivity and catalytic activity of hydrogen atom chemisorbed silver clusters}, journal = {Journal of Physical Chemistry A}, volume = {119}, number = {24}, year = {2015}, month = {JUN}, pages = {6162-6170}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Metal clusters of silver have attracted recent interest of researchers as a result of their potential in different,catalytic applications and low Cost. However, due to the completely filled d orbital and very high first ionization potential of the silver atom, the silver-based catalysts interact very weakly with the reacting molecules. In the current work, density functional theory calculations were carried out to investigate the effect of hydrogen atom chemisorption. On the reactivity and catalytic properties of inert silver clusters Our results affirm that the hydrogen atom chemisorption leads to enhancement the binding energy of the adsorbed O-2 molecule on the inert silver clusters. The increase in the binding energy is also characterized by the decrease in the Ag-O and increase in the O-O bond lengths in the case of the AgnH Silver clusters. Pertinent to the increase in the O-O bond length, a. significant red shift in the O-O Stretching frequency is. also noted in the case,of the AgnH silver clusters. Moreover, the hydrogen atom chemisorbed silver clusters show low reaction barriers and heat Of formation of the final products for the,environmentally important CO oxidation reaction as compared to the parent catalytically inactive clusters The obtained results were compared with those of the corresponding gold and hydrogen atom chemisorbed gold clusters obtained at the same level of theory. It is expected the current computational study will provide key insights for future advances in the design of efficient nanosilver-based catalysts through the adsorption of a small atom or a ligand.

}, issn = {1089-5639}, doi = {10.1021/acs.jpca.5b01987}, author = {Manzoor, Dar and Pal, Sourav} } @article { ISI:000352508300032, title = {Reactivity and operational stability of N-Tailed TAMLs through kinetic studies of the catalyzed oxidation of orange II by H2O2: synthesis and x-ray structure of an N-Phenyl TAML}, journal = {Chemistry A-European Journal}, volume = {21}, number = {16}, year = {2015}, month = {APR}, pages = {6226-6233}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

{The catalytic activity of the N-tailed (biuret) TAML (tetraamido macrocyclic ligand) activators [Fe{4-XC6H3-1,2-(NCOCMe2NCO)(2)NR}Cl](2-) (3; N atoms in boldface are coordinated to the central iron atom; the same nomenclature is used in for compounds 1 and 2 below), [X

}, keywords = {Hydrogen peroxide, iron, kinetics, Oxidation, reaction mechanisms}, issn = {0947-6539}, doi = {10.1002/chem.201406061}, author = {Warner, Genoa R. and Mills, Matthew R. and Enslin, Clarissa and Pattanayak, Shantanu and Panda, Chakadola and Panda, Tamas Kumar and Sen Gupta, Sayam and Ryabov, Alexander D. and Collins, Terrence J.} } @article { ISI:000363167900028, title = {Reagent for specific recognition of cysteine in aqueous buffer and in natural milk: imaging studies, enzymatic reaction and analysis of whey protein}, journal = {Chemical Communications}, volume = {51}, number = {85}, year = {2015}, month = {AUG}, pages = {15592-15595}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We report a new chemodosimetric probe (L) for specific recognition of cysteine (Cys) in aqueous buffer and in whey protein isolated from fresh cow{\textquoteright}s milk. Using this reagent we could develop a luminescence-based methodology for estimation of Cys released from a commercially available Cys-supplement drug by aminoacylase-1 in live cells.

}, issn = {1359-7345}, doi = {10.1039/c5cc04876a}, author = {Anila, H. A. and Reddy, Upendar G. and Ali, Firoj and Taye, Nandaraj and Chattopadhyay, Samit and Das, Amitava} } @article { ISI:000358219300005, title = {Recent advances in employing homoenolates generated by N-heterocyclic carbene (NHC) catalysis in carbon-carbon bond-forming reactions}, journal = {Chemical Society Reviews}, volume = {44}, number = {15}, year = {2015}, month = {MAY}, pages = {5040-5052}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The use of NHCs for generating homoenolate species has gained widespread popularity in recent years. A number of highly stereoselective processes of NHC-homoenolates have emerged. Homoenolate reactions have also been employed as key steps in the total synthesis of a number of natural products. The use of compatible co-catalysts, improved NHC-catalyst design and the use of novel precursors for homoenolate generation are among the major developments in this area that were disclosed recently. This tutorial review organises and presents the advancements in this rapidly growing area of catalysis and in the process updates a previous account published in 2011 in this journal.

}, issn = {0306-0012}, doi = {10.1039/c5cs00162e}, author = {Menon, Rajeev S. and Biju, Akkattu T. and Nair, Vijay} } @article {42436, title = {Recent advances in the N-heterocyclic carbene (NHC)-organocatalyzed stetter reaction and related chemistry}, journal = {Synthesis-Stuttgart}, volume = {47}, year = {2015}, month = {APR}, pages = {1357-1378}, abstract = {

Recent developments in the N-heterocyclic carbene (NHC)-catalyzed umpolung of aldehydes followed by their interception with activated carbon{\textendash}carbon double bonds, namely the Stetter reaction, are presented. Advances in the inter- and intramolecular versions of this reaction, enantioselective transformations as well as the use of unactivated olefins in this type of reaction are discussed.

}, doi = {10.1055/s-0034-1378692}, author = {Yetra, Santhivardhana Reddy and Patra, Atanu and Biju, Akkattu T.} } @article { ISI:000352791300086, title = {Recent development of plant products with anti-glycation activity: a review}, journal = {RSC Advances}, volume = {5}, number = {39}, year = {2015}, month = {MAR}, pages = {31113-31138}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Diabetes mellitus (DM) is an endocrine disorder characterized by chronic hyperglycemia, which results from an absolute or a relative deficiency of insulin or resistance to insulin. Hyperglycemia is increasingly linked to the pathogenesis of diabetic complications in individuals with long-duration diabetes. One of the inevitable consequences of hyperglycemia is the enhanced accumulation of advanced glycation end-products (AGEs), which are implicated in the pathogenesis of diabetes. Various natural products and their active constituents have reportedly been used for the treatment of diabetes and its complications. Some of these molecules are known to have anti-glycation activity. The search for novel anti-glycation agents from various sources is gaining a lot of importance. Attention has especially been focused on plants with an ethnopharmacological background and also on plants rich in triterpenoids and phenolics, which generally exhibit antioxidant and anti-glycation effects. Plant extracts or compounds obtained from them that possess both antioxidant and anti-glycation activities might have great therapeutic potential for treating diabetic complications. This review highlights the anti-glycation activities of phytochemicals, which will aid in the identification of lead molecules for the development of new anti-glycation drugs.

}, issn = {2046-2069}, doi = {10.1039/c4ra14211j}, author = {Chinchansure, Ashish A. and Korwar, Arvind M. and Kulkarni, Mahesh J. and Joshi, Swati P.} } @article { ISI:000359234100003, title = {Recent developments in 2D layered inorganic nanomaterials for sensing}, journal = {Nanoscale}, volume = {7}, number = {32}, year = {2015}, month = {JUN}, pages = {13293-13312}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Two dimensional layered inorganic nanomaterials (2D-LINs) have recently attracted huge interest because of their unique thickness dependent physical and chemical properties and potential technological applications. The properties of these layered materials can be tuned via both physical and chemical processes. Some 2D layered inorganic nanomaterials like MoS2, WS2 and SnS2 have been recently developed and employed in various applications, including new sensors because of their layer-dependent electrical properties. This article presents a comprehensive overview of recent developments in the application of 2D layered inorganic nanomaterials as sensors. Some of the salient features of 2D materials for different sensing applications are discussed, including gas sensing, electrochemical sensing, SERS and biosensing, SERS sensing and photodetection. The working principles of the sensors are also discussed together with examples.

}, issn = {2040-3364}, doi = {10.1039/c5nr03633j}, author = {Kannan, Padmanathan Karthick and Late, Dattatray J. and Morgan, Hywel and Rout, Chandra Sekhar} } @article { ISI:000350842300005, title = {Recent developments in solar H-2 generation from water splitting}, journal = {Journal of Chemical Sciences}, volume = {127}, number = {1}, year = {2015}, month = {JAN}, pages = {33-47}, publisher = {INDIAN ACAD SCIENCES}, address = {C V RAMAN AVENUE, SADASHIVANAGAR, P B \#8005, BANGALORE 560 080, INDIA}, abstract = {

Hydrogen production from water and sunlight through photocatalysis could become one of the channels, in the not-so-distant future, to meet a part of ever growing energy demands. However, accomplishing solar water splitting through semiconductor particulate photocatalysis seems to be the {\textquoteleft}Holy Grail{\textquoteright} problem of science. In the present mini-review, some of the critical strategies of semiconductor photocatalysis are focused with the aim of enumerating underlying critical factors such as visible light harvesting, charge carrier separation, conduction and their utilization that determine the quantum efficiency. We attempted to bring out the essential requirements expected in a material for facile water splitting by explaining important and new designs contributed in the last decade. The newly emerged designs in semiconductor architecture employing nanoscience towards meeting the critical factors of facile photocatalysis are elucidated. The importance of band gap engineering is emphasized to utilize potential wide band gap semiconductors. Assistance of metal nanostructures and quantum dots to semiconductors attains vital importance as they are exuberant visible light harvesters and charge carrier amplifiers. Benevolent use of quantum dots in solar water splitting and photoelectrochemical water splitting provides scope to revolutionize the quantum efficiency by its multiple exciton generation features. A list of drawbacks and issues that hamper the much needed breakthrough in photocatalysis of water splitting is provided to invite attention to address them and move towards sustainable water splitting.

}, keywords = {Hydrogen, nanomaterial, Photocatalysis, quantum dot, Semiconductor, visible light, water splitting}, issn = {0974-3626}, doi = {10.1007/s12039-014-0747-0}, author = {Rajaambal, Sivaraman and Sivaranjani, Kumarsrinivasan and Gopinath, Chinnakonda S.} } @article { ISI:000363416400072, title = {Recyclable ionic liquid iodinating reagent for solvent free, regioselective iodination of activated aromatic and heteroaromatic amines}, journal = {RSC Advances}, volume = {5}, number = {107}, year = {2015}, month = {OCT}, pages = {88311-88315}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This article describes a simple, efficient method for iodination of activated aromatic and heteroaromatic amines using recyclable 1-butyl-3-methylpyridinium dichloroiodate (BMPDCI) as an ionic liquid iodinating reagent, in the absence of any solvent. The main advantages are a simple efficient procedure, good yields and no need for any base/toxic heavy metals, or oxidizing agents. The ionic liquid was recovered and recycled in five subsequent reactions, without much loss of activity. This method was applied for the synthesis of the antiprotozoal drug iodoquinol and the antifungal drug clioquinol.

}, issn = {2046-2069}, doi = {10.1039/c5ra14702f}, author = {Deshmukh, Amarsinh and Gore, Babasaheb and Thulasiram, Hirekodathakallu V. and Swamy, Vincent P.} } @article { ISI:000357617800013, title = {Reduced graphene oxide composite with oxidizable manganese/cobalt mixed oxide for p-cresol oxidation by using molecular oxygen}, journal = {ChemPlusChem}, volume = {80}, number = {7}, year = {2015}, month = {JUL}, pages = {1164-1169}, publisher = {WILEY-V C H VERLAG GMBH}, type = {Article}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

A composite of graphene oxide (GO) with mixed oxide (MnCo) was prepared by using a solvothermal method. During the synthesis, both the reduction of GO and growth of metal oxides took place simultaneously. The as-prepared composite material was highly selective for the liquid-phase oxidation of p-cresol to form p-hydroxybenzaldehyde in 71\% yield within 1h. The composite material was characterised by SEM, X-ray photoelectron spectroscopy, high-resolution TEM and cyclic voltammetry (CV). A CV study revealed that the increase in the redox potential of the mixed oxide after being supported on GO, led to its higher activity of the catalyst for the oxidation reaction. The stability of the catalyst under the reaction conditions was studied by its successful reuse in three cycles.

}, keywords = {cyclic voltammetry, graphene, Oxidation, supported catalysts, transition metals}, issn = {2192-6506}, doi = {10.1002/cplu.201500053}, author = {Jha, Ajay and Patil, Sagar H. and Solanki, Bhanu P. and Ribeiro, Ana P. C. and Castro, Carlos A. N. and Patil, Kashinath R. and Coronas, Alberto and Rode, Chandrashekhar V.} } @article { ISI:000360025100006, title = {Reduction of graphene oxide by 100 MeV Au ion irradiation and its application as H2O2 sensor}, journal = {Journal of Physics D-Applied Physics}, volume = {48}, number = {36}, year = {2015}, month = {SEP}, pages = {365105}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

Graphene oxide (GO) synthesized from a modified Hummer{\textquoteright}s method was reduced (referred, rGO) by using 100 MeV Au ion species and its response to the sense H2O2 was investigated. The changes in the atomic composition and structural properties of rGO after irradiation were studied using x-ray diffraction, Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy. These results suggested that the removal of the oxygen-containing functional groups and the improvement of the electrochemical performance of reduced graphene oxide (rGO) after ion irradiation. Raman spectroscopic results revealed the increase in the disorder parameter (I-D/I-G) after Au ion irradiation and also the formation of a large number of small sp(2) domains due to the electronic energy loss of ion beam. The resultant rGO was investigated for H2O2 sensing using electrochemical techniques and it showed a good response.

}, keywords = {electronic energy loss, GO, ion beam irradiation, reduction}, issn = {0022-3727}, doi = {10.1088/0022-3727/48/36/365105}, author = {Hareesh, K. and Joshi, R. P. and Shateesh, B. and Asokan, K. and Kanjilal, D. and Late, Dattatray J. and Dahiwale, S. S. and Bhoraskar, Vasant N. and Haram, Santosh K. and Dhole, Sanjay D.} } @article { ISI:000365222000045, title = {Regioselective and diastereoselective iodocyclization reaction of alkene-thioureas: an efficient approach to bicyclic beta-lactams}, journal = {New Journal of Chemistry}, volume = {39}, number = {12}, year = {2015}, month = {SEP}, pages = {9422-9428}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Bicyclic beta-lactams, i.e. 3-thia-1-dethiacephams, were synthesized via a highly regioselective and diastereoselective iodocyclization reaction of alkene-thioureas with molecular iodine. Furthermore, the structure of 3-thia-1-dethiacepham was confirmed by a chemical method, the dehydrohalogenation reaction using DBU.

}, issn = {1144-0546}, doi = {10.1039/c5nj01963j}, author = {Garud, Dinesh R. and Sonawane, Amol D. and Auti, Jyoti B. and Rode, Navnath D. and Ranpise, Vinod R. and Joshi, Rohini R. and Joshi, Ramesh A.} } @article { ISI:000354188800009, title = {Relativistic equation-of-motion coupled-cluster investigation of the trends of single and double ionization potentials in the He and Be isoelectronic systems}, journal = {Journal of Physics B-Atomic Molecular and Optical Physics}, volume = {48}, number = {11}, year = {2015}, month = {JUN}, pages = {115009}, publisher = {IOP PUBLISHING LTD}, address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND}, abstract = {

We employ a four-component spinor relativistic equation-of-motion coupled-cluster (EOMCC) method within the single-and double-excitation approximation to calculate the single ionization potentials (IPs) and double ionization potentials (DIPs) of the He and Be isoelectronic sequences up to Ne. The obtained results are compared with the available results from the National Institute of Standards and Technology (NIST) database to test the performance of the EOMCC method. We also present intermediate results at different levels of approximations in the EOMCC framework to gain insight of the effect of electron correlation. Furthermore, we investigate the dependence of the IPs and DIPs of these ions on the ionic charge and observe that these follow parabolic trends. Similarities between the trends of IPs and DIPs in both the classes of considered systems are categorically demonstrated.

}, keywords = {coupled-cluster method, double ionization potentials, equation-of-motion theory}, issn = {0953-4075}, doi = {10.1088/0953-4075/48/11/115009}, author = {Pathak, Himadri and Sahoo, B. K. and Sengupta, Turbasu and Das, B. P. and Vaval, Nayana and Pal, Sourav} } @article {42629, title = {Relativistic extended coupled cluster method for magnetic hyperfine structure constant}, journal = {Physical Review A}, volume = {91}, year = {2015}, month = {FEB}, pages = {Article No. 022512}, type = {Article}, doi = {10.1103/PhysRevA.91.022512}, author = {Sasmal, Sudip and Pathak, Himadri and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {43312, title = {Release of a guest by disassembling a capsule through a photo triggering process}, journal = {Organic Letters}, volume = {15}, year = {2015}, month = {JAN}, pages = {4374 - 4377}, author = {Nithyanandhan, Jayaraj and Jagadesan, P. and Samanta, S. R. and Da Silva, J. P. and Ramamurthy, V.} } @article { ISI:000363949300020, title = {Removal of methylene blue (MB) dye from water environment by processed Jowar Stalk [Sorghum bicolor (L.) Moench] adsorbent}, journal = {Clean Technologies and Environmental Policy}, volume = {17}, number = {8}, year = {2015}, month = {DEC}, pages = {2349-2359}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

The present paper discusses the results of the study of adsorption of methylene blue on activated carbon, derived from cheap and abundantly available agro-residue of Jowar Stalk (JS) [Sorghum bicolor (L.) Moench] on suitable heat and acid treatment. The physico-chemical and morphological characteristics of processed carbon of JS origin were studied using X-ray diffraction, scanning electron microscopy, Brunauer, Emmett and Teller surface area, and Fourier transform infrared spectrophotometry analyses. The batch studies revealed optimum values of adsorption parameters such as pH, adsorbent dosage, agitation speed, grain size, temperature, and contact time as 7, 1.5 g l(-1), 200 rpm, finer than 75 A mu m, 30 A degrees C, and 7 h, respectively. The adsorption isotherm data were best described by Langmuir isotherm model with a maximum adsorption capacity of 176.05 mg MB g(-1) JS activated carbon at 30 A degrees C, which is higher than that available with adsorbents used by past researchers. In terms of cost-effectiveness, JS carbon shows its superiority over commercially available carbon.

}, keywords = {Adsorption, Isotherms, kinetics, Methylene blue, Processed Jowar Stalk [Sorghum bicolor (L.) Moench]}, issn = {1618-954X}, doi = {10.1007/s10098-015-0977-y}, author = {Dod, Ramesh and Banerjee, Goutam and Saini, D. R.} } @article { ISI:000350685400013, title = {Renewable fuels from biomass-derived compounds: Ru-containing hydrotalcites as catalysts for conversion of HMF to 2,5-dimethylfuran}, journal = {Catalysis Science \& Technology}, volume = {5}, number = {3}, year = {2015}, month = {MAR}, pages = {1463-1472}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Production of transportation fuels from renewable biomass is hugely important considering the current ecological concerns over CO2 built up in the atmosphere. Ruthenium-containing hydrotalcite (HT) catalysts were applied for the selective hydrogenolysis of biomass-derived 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF). Structural and morphological features of the catalysts were examined using various physico-chemical characterization techniques. The influence of various reaction parameters, such as reaction temperature, solvent, Ru content of the catalyst, etc., was investigated with respect to HMF conversion and DMF yield. The study clearly shows that well-dispersed Ru nanoparticles are highly active and selective in the conversion of HMF to DMF. A catalyst containing only 0.56 wt\% Ru converted 100 mol\% HMF to yield 58 mol\% DMF. This catalyst was found to be recyclable as the activity was retained even after five cycles of reaction. 2-Propanol was found to be a good solvent as it helped to improve DMF yield through transfer hydrogenation. Based on the results of the investigations, a reaction pathway for the conversion of HMF to DMF was proposed for the present Ru-based catalyst system.

}, issn = {2044-4753}, doi = {10.1039/c4cy01376j}, author = {Nagpure, Atul S. and Venugopal, Ashok Kumar and Lucas, Nishita and Manikandan, Marimuthu and Thirumalaiswamy, Raja and Chilukuri, Satyanarayana V.} } @article { ISI:000350674400031, title = {Reversal of H-bonding direction by N-sulfonation in a synthetic reverse-turn peptide motif}, journal = {Organic \& Biomolecular Chemistry}, volume = {13}, number = {10}, year = {2015}, month = {MAR}, pages = {3064-3069}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This communication depicts an intriguing example of hydrogen-bonding reversal upon introduction of a sulfonamide linkage at the N-terminus of a synthetic reverse-turn peptide motif. The ready availability of two sulfonyl oxygen atoms, as hydrogen-bonding acceptors, combined with the inherent twisted conformation of sulfonamides are seen to act as switches that engage/disengage the hydrogen-bond at the sticky ends/termini.

}, issn = {1477-0520}, doi = {10.1039/c4ob02438a}, author = {Vijayadas, Kuruppanthara N. and Kotmale, Amol S. and Thorat, Shridhar H. and Gonnade, Rajesh G. and Nair, Roshna V. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000364933100004, title = {Reversed reactivity of anilines with alkynes in the rhodium-catalysed C-H activation/carbonylation tandem}, journal = {Nature Communications}, volume = {6}, year = {2015}, month = {OCT}, pages = {Article Number: 8591}, publisher = {NATURE PUBLISHING GROUP}, address = {MACMILLAN BUILDING, 4 CRINAN ST, LONDON N1 9XW, ENGLAND}, abstract = {

Development of multicatalytic approach consisting of two or more mechanistically distinct catalytic steps using a single-site catalyst for rapid and straightforward access of structurally complex molecules under eco-benign conditions has significance in contemporary science. We have developed herein a rhodium-catalysed C-H activation strategy which uses an unprotected anilines and an electron-deficient alkynes to C-C bonded products as a potential intermediate in contrast to the archetypical C-N bonded products with high levels of regioselectivity. This is followed by carbonylation of C-H bond activated intermediate and subsequent annulation into quinolines has been described. This rhodium-catalysed auto-tandem reaction operates under mild, environmentally benign conditions using water as the solvent and CO surrogates as the carbonyl source with the concomitant generation of hydrogen gas. The strategy may facilitate the development of new synthetic protocols for the efficient and sustainable production of chemicals in an atom-economic way from simple, abundant starting materials.

}, issn = {2041-1723}, doi = {10.1038/ncomms9591}, author = {Midya, Siba Prasad and Sahoo, Manoj Kumar and Landge, Vinod Gokulkrishna and Rajamohanan, P. R. and Balaraman, Ekambaram} } @article {42697, title = {Reverse-hydroformylation: a missing reaction explored}, journal = {Organic Chemistry Frontiers}, volume = {2}, year = {2015}, month = {AUG}, pages = {1422-1424}, abstract = {

Recent progress in transition-metal catalysed acceptor- and acceptorless-reverse hydroformylation of aldehydes for the conversion of olefins has been discussed. The aldehyde feedstock serves as a source for production of syngas and valuable alkenes.

}, doi = {10.1039/C5QO00229J}, author = {Nandakumar, Avanashiappan and Sahoo, Manoj Kumar and Balaraman, Ekambaram} } @article { ISI:000355889800021, title = {Review of the hydrate based gas separation (HBGS) process for carbon dioxide pre-combustion capture}, journal = {Energy}, volume = {85}, year = {2015}, month = {JUN}, pages = {261-279}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

In this work, a systematic review of the literature work done so far on the use of hydrate crystallization as a basis to develop data for the hydrate based gas separation (HBGS) process for the capture of CO2 from fuel gas mixtures is presented. Such a gas mixture may arise in integrated gasification combined cycle (IGCC) power plants. A thorough assessment of the thermodynamic, kinetic factors and economic aspects of the HBGS process and critical comments are presented. Compared with competing technologies, high CO2 capacity and the use of water as a solvent are key advantages for the HBGS process for CO2 capture. Furthermore, in this review, a snapshot of the current state-of-the-art is presented and further research and development opportunities and pathways for commercializing the HBGS process for pre-combustion capture of CO2 from IGCC power plants are discussed. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Carbon dioxide capture, Clathrate process, Gas hydrates, Gas separation, IGCC plants, Pre-combustion capture}, issn = {0360-5442}, doi = {10.1016/j.energy.2015.03.103}, author = {Babu, Ponnivalavan and Linga, Praveen and Kumar, Rajnish and Englezos, Peter} } @article { ISI:000365462600035, title = {Rh-catalyzed synthesis of coumarin derivatives from phenolic acetates and acrylates via C-H bond activation}, journal = {Journal of Organic Chemistry}, volume = {80}, number = {22}, year = {2015}, month = {NOV}, pages = {11544-11550}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An efficient annulation strategy involving the reaction of phenolic acetates with acrylates in the presence of [Rh-2(OAc)(4)] as catalyst and formic acid as reducing agent, leading to the high yield synthesis of coumarin derivatives, has been developed. The addition of NaOAc as a base increased the yield of the products. The reaction is quite Successful for both electron rich as well as electron deficient phenolic acetates, affording coumarins with excellent regioselectivity, and proceeds via, C-H bond activation proven by deuterium incorporation studies.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.5b01713}, author = {Gadakh, Sunita K. and Dey, Soumen and Sudalai, Arumugarn} } @article { ISI:000356305300034, title = {Rhodium complex with unsymmetrical vicinal diamine ligand: excellent catalyst for asymmetric transfer hydrogenation of ketones}, journal = {RSC Advances}, volume = {5}, number = {64}, year = {2015}, month = {JUN}, pages = {51722-51729}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

New unsymmetrical vicinal diamine ligands with systematic variation in the regio and stereo positions in the amine and sulphonamide groups were synthesized from cheap starting material such as norephedrine. Catalytic Asymmetric Transfer Hydrogenation (ATH) of aromatic alkyl ketones has been investigated using transition metal complexes and new derivatives of monotosylated unsymmetrical vicinal diamine ligands using sodium formate as the hydrogen source, in water and methanol. Chiral secondary alcohols were obtained with excellent enantioselectivity (\>95\% ee) and conversion of ketones (\>95\%) with [Rh(Cp*)Cl-2](2) and ligand 4 as a catalyst. Enantioselectivity was found to be slightly higher with the use of methanol as a solvent for ATH of ketones with sodium formate as the hydrogen source compared to water as a solvent and was found to be consistent with all the ketones investigated. The reaction mixture is homogeneous in methanol unlike in water, where substrate and product are insoluble in water and form separate phase, sodium formate being soluble in water. The activity and enantioselectivity obtained for ATH of ketones using [Rh(Cp*)Cl-2](2) and unsymmetrical vicinal diamine ligand as catalyst was comparable with the C2 symmetric benchmark ligands like TsDPEN ((1R, 2R)-N-(p-tolylsulfonyl)-1,2-diphenylethylene- diamine), and TsCYDN ((1R, 2R)-N-(p-tolylsulfonyl)-1,2-cyclohexyl, diamine) under similar reaction conditions. To the best of our knowledge, this is first example of the ATH of ketones with good activity and high enantioselectivity with [Rh(Cp*)Cl-2](2) and unsymmetrical vicinal diamine ligands as catalyst systems.

}, issn = {2046-2069}, doi = {10.1039/c5ra08220j}, author = {Deshpande, Sudhindra H. and Shende, Vaishali S. and Shingote, Savita K. and Chakravarty, Debamitra K. and Puranik, Vedavati G. and Chaudhari, Raghunath V. and Kelkar, Ashutosh A.} } @article { ISI:000353689400017, title = {Rifampicin reduces advanced glycation end products and activates DAF-16 to increase lifespan in Caenorhabditis elegans}, journal = {Aging Cell}, volume = {14}, number = {3}, year = {2015}, month = {JUN}, pages = {463-473}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

Advanced glycation end products (AGEs) are formed when glucose reacts nonenzymatically with proteins; these modifications are implicated in aging and pathogenesis of many age-related diseases including type II diabetes, atherosclerosis, and neurodegenerative disorders. Thus, pharmaceutical interventions that can reduce AGEs may delay age-onset diseases and extend lifespan. Using LC-MSE, we show that rifampicin (RIF) reduces glycation of important cellular proteins in vivo and consequently increases lifespan in Caenorhabditis elegans by up to 60\%. RIF analog rifamycin SV (RSV) possesses similar properties, while rifaximin (RMN) lacks antiglycation activity and therefore fails to affect lifespan positively. The efficacy of RIF and RSV as potent antiglycating agents may be attributed to the presence of a p-dihydroxyl moiety that can potentially undergo spontaneous oxidation to yield highly reactive p-quinone structures, a feature absent in RMN. We also show that supplementing rifampicin late in adulthood is sufficient to increase lifespan. For its effect on longevity, rifampicin requires DAF-18 (nematode PTEN) as well as JNK-1 and activates DAF-16, the FOXO homolog. Interestingly, the drug treatment modulates transcription of a different subset of DAF-16 target genes, those not controlled by the conserved Insulin-IGF-1-like signaling pathway. RIF failed to increase the lifespan of daf-16 null mutant despite reducing glycation, showing thereby that DAF-16 may not directly affect AGE formation. Together, our data suggest that the dual ability to reduce glycation in vivo and activate prolongevity processes through DAF-16 makes RIF and RSV effective lifespan-extending interventions.

}, keywords = {advanced glycation end products, aging, Caenorhabditis elegans, DAF-16, Glycation, lifespan, rifampicin}, issn = {1474-9718}, doi = {10.1111/acel.12327}, author = {Golegaonkar, Sandeep and Tabrez, Syed S. and Pandit, Awadhesh and Sethurathinam, Shalini and Jagadeeshaprasad, Mashanipalya G. and Bansode, Sneha B. and Sampathkumar, Srinivasa-Gopalan and Kulkarni, Mahesh J. and Mukhopadhyay, Arnab} } @article { ISI:000366339300003, title = {RNA stem-loop to G-quadruplex equilibrium controls mature MicroRNA production inside the cell}, journal = {Biochemistry}, volume = {54}, number = {48}, year = {2015}, month = {DEC}, pages = {7067-7078}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The biological role of the existence of overlapping structures in RNA is possible yet remains very unexplored. G-Rich tracts of RNA form G-quadruplexes, while GC-rich sequences prefer stem-loop structures. The equilibrium between alternate structures within RNA may occur and influence its functionality. We tested the equilibrium between G-quadruplex and stem-loop structure in RNA and its effect on biological processes using pre-miRNA as a model system. Dicer enzyme recognizes canonical stem-loop structures in pre-miRNA to produce mature miRNAs. Deviation from stem-loop leads to deregulated mature miRNA levels, providing readout of the existence of an alternate structure per se G-quadruplex-mediated structural interference in miRNA maturation. In vitro analysis using beacon and Dicer cleavage assays indicated that mature miRNA levels depend on relative amounts of K+: and Mg2+ ions, suggesting an ion-dependent structural shift. Further in cellulo studies with and without TmPyP4 (RNA G-quadruplex destabilizer) demonstrated that miRNA biogenesis is modulated by G-quadruplex to stem-loop equilibrium in a subset of pre-miRNAs. Our combined analysis thus provides evidence of the formation of noncanonical G-quaciruplexes in competition with canonical stem-loop structure inside the cell and its effect on miRNA maturation in a comprehensive manner.

}, issn = {0006-2960}, doi = {10.1021/acs.biochem.5b00574}, author = {Pandey, Satyaprakash and Agarwala, Prachi and Jayaraj, Gopal Gunanathan and Gargallo, Raimundo and Maiti, Souvik} } @article { ISI:000350116200014, title = {Robustness screen in enantioselective catalysis enabled generation of enantioenriched heterocyclic scaffolds in one pot}, journal = {Chemistry-A European Journal}, volume = {21}, number = {9}, year = {2015}, month = {FEB}, pages = {3580-3584}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Enantioselective catalysis has emerged as a powerful synthetic paradigm and has accelerated the development of new methods to make diverse chiral molecules. Generally, these reactions are very sensitive to the steric and electronic environment present in the catalyst as well as the substrates. With this scenario, the presence of an additional component in the reaction mixture is expected to add complexity in achieving the enantioselective variants. Herein, we report that various enantioenriched molecules could be obtained from multiple starting materials in one pot. The reaction of aminoaromatics A with alkynols B-1, B-2, B-3...B-n with a Au-I/chiral BrOnsted acid catalyst afforded AB(1)*, AB(2)*, AB(3)*...AB(n)*; while, the reaction of alkynols B with aminoaromatics A(1), A(2), A(3)...A(n) under the same reaction conditions gave A(1)B*, A(2)B*, A(3)B*...A(n)B*.

}, keywords = {chiral Bronsted acid, Enantioselectivity, Gold, molecular scaffolds, robustness screen}, issn = {0947-6539}, doi = {10.1002/chem.201406045}, author = {Bagle, Pradip N. and Shinde, Valmik S. and Patil, Nitin T.} } @article {45930, title = {Role of aliovalent cation doping in the activity of nanocrystalline CdS for visible-light-driven H-2 production from water}, journal = {International Journal of Hydrogen Energy}, volume = {40}, year = {2015}, month = {JUL }, pages = {8695-8705}, type = {Article}, abstract = {

This study was aimed at discerning the enhancement in the visible-light-driven water splitting activity of nanocrystalline CdS photocatalysts because of their doping with a small amount of an aliovalent cation (Ag+ or Cr3+). The CdS/Cr-x (x = 0-2.3 wt\%) and CdS/Ag-x (x = 0-1.5 wt\%) samples, which were synthesized using a one-step hydrothermal method, were characterized systematically for their crystallographic, morphological, interfacial, and photo-physical properties. The Rietveld refinement of the powder X-ray diffraction data enabled us to quantify the doping-effect on the phase composition and lattice parameters. As compared to pure CdS, the samples containing similar to 0.2 wt\% of Cr or Ag showed two or tenfold enhancement in the rate of H-2 evolution from water, respectively, when sulfide-sulfite ions were used as sacrificial electron donors. This pyramidal trend, i.e. maximum activity for a specific impurity content, which decreased on decreasing as well as increasing the amount of doping, did not occur owing to the presence of a secondary-phase metal sulfide or a dispersed metal cocatalyst. Our study revealed that instead of the widely advocated mechanism involving inter-semiconductor or semiconductor-to-metal electron transfer steps, the doping-modified photoactivity of CdS was governed by certain bulk and surface properties such as the cation-dependent particle nucleation, dominance of hex-CdS facets, and structural defects. Additionally, impurity-induced sub-bandgap charge-trapping states also contributed to the overall quantum efficiency. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2015.05.019}, author = {Korake, Prakash V. and Achary, Srungarpu N. and Gupta, Narendra M.} } @article { ISI:000360934800003, title = {Role of chemical reactivity and transition state modeling for virtual screening}, journal = {Combinatorial Chemistry \& High Throughput Screening}, volume = {18}, number = {7}, year = {2015}, month = {JAN}, pages = {638-657}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Every drug discovery research program involves synthesis of a novel and potential drug molecule utilizing atom efficient, economical and environment friendly synthetic strategies. The current work focuses on the role of the reactivity based fingerprints of compounds as filters for virtual screening using a tool ChemScore. A reactant-like (RLS) and a product-like (PLS) score can be predicted for a given compound using the binary fingerprints derived from the numerous known organic reactions which capture the molecule-molecule interactions in the form of addition, substitution, rearrangement, elimination and isomerization reactions. The reaction fingerprints were applied to large databases in biology and chemistry, namely ChEMBL, KEGG, HMDB, DSSTox, and the Drug Bank database. A large network of 1113 synthetic reactions was constructed to visualize and ascertain the reactant product mappings in the chemical reaction space. The cumulative reaction fingerprints were computed for 4000 molecules belonging to 29 therapeutic classes of compounds, and these were found capable of discriminating between the cognition disorder related and anti-allergy compounds with reasonable accuracy of 75\% and AUC 0.8. In this study, the transition state based fingerprints were also developed and used effectively for virtual screening in drug related databases. The methodology presented here provides an efficient handle for the rapid scoring of molecular libraries for virtual screening.

}, keywords = {fingerprints, intermediates, metabolic pathways, product-like score, reactant-like score, reaction, screening, synthesis, virtual screening}, issn = {1386-2073}, doi = {10.2174/1386207318666150703113135}, author = {Karthikeyan, Muthukumarasamy and Vyas, Renu and Tambe, Sanjeev S. and Radhamohan, Deepthi and Kulkarni, Bhaskar D.} } @article { ISI:000360934800001, title = {Role of data and methods in chemoinformatics for virtual screening}, journal = {Combinatorial Chemistry \& High Throughput Screening}, volume = {18}, number = {7}, year = {2015}, month = {JAN}, pages = {622-623}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, issn = {1386-2073}, doi = {10.2174/138620731807150903101821}, author = {Karthikeyan, Muthukumarasamy and Vyas, Renu} } @article { ISI:000358395100008, title = {Role of interfacial tension of solvating diluents and hydrophilic-hydrophobic cross-linkers in hyper-cross-linked solid supports}, journal = {Industrial \& Engineering Chemistry Research}, volume = {54}, number = {27}, year = {2015}, month = {JUL}, pages = {6893-6901}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The properties of a hyper-cross-linked solid support are the outcome Of the interfacial tension created by solvating/nonsolvating diluents, the hydrophilicity/hydrophobicity of the cross-linkers, and their concentrations. Interestingly, a More hydrophobic diluent and cross-linker as well as a higher concentration of cross-linker-containing copolymer revealed an increase In surface area. A high surface area and low cross-link density (CLD) polymer illustrated higher epoxy content. Importantly, maximum surface area (533 m(2)/g) Was obtained at high CLD; inversely, epoxy,content (1.83 mmol/g) was higher at low CLD polymer. Notably, greater rigidity of cross-linker and its higher concentration increased T-max and T-g; contrarily, greater flexibility of cross-linker and its concentration attenuated T-max and T-g. Thermal study demonstrated the thermostability (300 degrees C) and polymer safe temperature (220 degrees C). Indeed, a lower solubility parameter difference between polymer and swelling solvent produces a higher polymer-solvent interaction parameter, resulting in increased polymer swelling. Polymers with high surface area and low CLD demonstrated greater swelling behavior.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.5b01277}, author = {Mane, Sachin and Ponrathnam, Surendra and Chavan, Nayaku} } @inbook { ISI:000350416600017, title = {Role of lipid-mediated effects in beta(2)-adrenergic receptor dimerization}, booktitle = {biochemical roles of eukaryotic cell surface macromolecules}, series = {Advances in Experimental Medicine and Biology}, volume = {842}, year = {2015}, pages = {247-261}, publisher = {Springer-Verlag Berlin}, organization = {Springer-Verlag Berlin}, address = {Heidelberger Platz 3, D-14197 Berlin, Germany :}, isbn = {978-3-319-11280-0; 978-3-319-11279-4}, issn = {0065-2598}, doi = {10.1007/978-3-319-11280-0_16}, author = {Prasanna, Xavier and Chattopadhyay, Amitabha and Sengupta, Durba}, editor = {Chakrabarti, A. and Surolia, A.} } @article { ISI:000360026900051, title = {Role of metallic packing and kinetic promoter in designing a hydrate-based gas separation process}, journal = {Energy \& Fuels}, volume = {29}, number = {7}, year = {2015}, note = {2nd International Conference Biogas Science, Vienna, AUSTRIA, 2014}, month = {JUL}, pages = {4463-4471}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

In the present work, kinetics of the hydrate-based gas separation (HBGS) process has been studied employing an unstirred reactor configuration. Gas uptake measurements were carried out for studying hydrate formation kinetics and final water to hydrate conversion using fuel gas mixtures (mixture 1, 40.4\% CO2 + 59.6\% H-2; mixture 2, 40.9\% CO2 + 58.05\% H-2 + 1.05\% H2S). Silica sand and stainless-steel-structured packing (SSP) were used as contact media in the presence of an anionic surfactant sodium dodecyl sulfate (SDS) as a kinetic promoter. Experiments were conducted with three different concentrations of SDS in water to enhance hydrate formation kinetics. On the basis of induction time and rate of hydrate growth, 1 wt \% SDS was determined to be the best concentration for carbon dioxide capture at 7.0 MPa and 273.65 K from the CO2 + H-2 gas mixture. In comparison to silica sand packing, use of SSP was found to improve the final water to hydrate conversion (71.0 +/- 4.1\%). The addition of H2S impurity in the fuel gas mixture was also found to enhance the rate of hydrate formation in the presence of SDS at 7.8 MPa and 274.5 K. On the basis of the experimental results and our previous studies on separation efficiency, a continuous HBGS process is proposed to separate CO2 and produce CO2- and H2S-free H-2 stream from a fuel gas mixture.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.5b00664}, author = {Kumar, Asheesh and Kumar, Rajnish} } @article { ISI:000368436000017, title = {Role of methyl jasmonate in the expression of mycorrhizal induced resistance against Fusarium oxysporum in tomato plants}, journal = {Physiological and Molecular Plant Pathology}, volume = {92}, year = {2015}, month = {OCT}, pages = {139-145}, publisher = {ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD}, address = {24-28 OVAL RD, LONDON NW1 7DX, ENGLAND}, abstract = {

Arbuscular mycorrhiza (AM) colonization led to a decrease in the severity of fusarium wilt disease caused by Fusarium oxysporum f. sp. lycopersici in tomato plants. The involvement of two plant defense hormones, namely methyl jasmonate (MeJA) and salicylic acid (SA), in the expression of mycorrhiza induced resistance (MIR) against this vascular pathogen was studied in the AM colonized and non-colonized (controls) plants. Activity of lipoxygenase (LOX), which plays a role in jasmonic acid (JA) biosynthesis, as well as levels of methyl jasmonate (MeJA) increased in AM colonized plants as compared to controls, but did not show any further changes in response to F. oxysporum inoculation. On the other hand, activity of phenylalanine ammonia lyase (PAL), which is an enzyme from salicylic acid (SA) biosynthetic pathway, as well as SA levels, increased in both controls and AM colonized plants in response to application of F. oxysporum spores. Hence the JA and not the SA signalling pathway appeared to play a role in the expression of MIR against this vascular pathogen. The resistance observed in AM colonized plants was completely compromised when plants were treated with the JA biosynthesis inhibitor salicylhydroxamic acid (SHAM). This confirmed that the AM-induced increase in JA levels was involved in the expression of resistance toward F. oxysporum. The SA response gene pathogenesis-related 1 (PR1) showed an increased expression in response to F. oxysporum infection in SHAM treated AM colonized plants as compared to plants that were not treated with this JA inhibitor. This suggested the possibility that JA inhibited SA responses, at least in the roots. AM colonization therefore appeared to prime plants for improved tolerance against the vascular pathogen F. oxysporum, which was mediated through the JA signalling pathway. (C) 2015 Elsevier Ltd. All rights reserved.

}, keywords = {Fusarium wilt, Glomus fasciculatum, Methyl jasmonate, Mycorrhiza induced resistance, Salicylic acid, Tomato}, issn = {0885-5765}, doi = {10.1016/j.pmpp.2015.10.002}, author = {Nair, Aswathy and Kolet, Swati P. and Thulasiram, Hirekodathakallu V. and Bhargava, Sujata} } @article { ISI:000354199900018, title = {Role of N-terminal proline in stabilizing the Ant-Pro zipper motif}, journal = {New Journal of Chemistry}, volume = {39}, number = {5}, year = {2015}, month = {MAR}, pages = {3327-3332}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Hetero-chiral hybrid peptides of the general sequence (L)alpha beta(D)(n)alpha beta(n) featuring proline (Pro, a constrained alpha-amino acid) and anthranilic acid (Ant, a constrained beta-amino acid) as building blocks, where n = 2, 4 etc., form a three-dimensional zipper-like architecture. These zipper peptides attain stable conformation by balancing the co-operative contribution of two competing non-covalent forces, namely hydrogen bonding and aromatic stacking. However, the selection of the N-terminal residue also stands to be one of the key contributors in stabilising the unusually long-range intramolecular hydrogen bond, featuring 26 atoms in the H-bonded ring observed at the termini. This article deals with the substitution alterations at the N-terminus of the zipper motif and their consequent influences on its structure and stability. In this study, the N-terminal Pro residue of the zipper motif was substituted with a flexible amino acid, alanine, and a constrained acyclic amino acid, 2-aminoisobutyric acid, to investigate the role of N-terminal proline in stabilizing the Ant-Pro zipper motif, and its stabilities were assessed by employing solution-state NMR and restrained MD simulation studies.

}, issn = {1144-0546}, doi = {10.1039/c4nj02151g}, author = {Kheria, Sanjeev and Nair, Roshna V. and Kotmale, Amol S. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000360934400002, title = {Role of open source tools and resources in virtual screening for drug discovery}, journal = {Combinatorial Chemistry \& High Throughput Screening}, volume = {18}, number = {6}, year = {2015}, month = {JUL}, pages = {528-543}, publisher = {BENTHAM SCIENCE PUBL LTD}, address = {EXECUTIVE STE Y-2, PO BOX 7917, SAIF ZONE, 1200 BR SHARJAH, U ARAB EMIRATES}, abstract = {

Advancement in chemoinformatics research in parallel with availability of high performance computing platform has made handling of large scale multi-dimensional scientific data for high throughput drug discovery easier. In this study we have explored publicly available molecular databases with the help of open-source based integrated in-house molecular informatics tools for virtual screening. The virtual screening literature for past decade has been extensively investigated and thoroughly analyzed to reveal interesting patterns with respect to the drug, target, scaffold and disease space. The review also focuses on the integrated chemoinformatics tools that are capable of harvesting chemical data from textual literature information and transform them into truly computable chemical structures, identification of unique fragments and scaffolds from a class of compounds, automatic generation of focused virtual libraries, computation of molecular descriptors for structure-activity relationship studies, application of conventional filters used in lead discovery along with in-house developed exhaustive PTC (Pharmacophore, Toxicophores and Chemophores) filters and machine learning tools for the design of potential disease specific inhibitors. A case study on kinase inhibitors is provided as an example.

}, keywords = {Chemoinformatics, kinases, open source, scaffold, virtual screening}, issn = {1386-2073}, doi = {10.2174/1386207318666150703111911}, author = {Karthikeyan, Muthukumarasamy and Vyas, Renu} } @article { ISI:000366878100001, title = {Role of surfactants in promoting gas hydrate formation}, journal = {Industrial \& Engineering Chemistry Research}, volume = {54}, number = {49}, year = {2015}, month = {DEC}, pages = {12217-12232}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Gas hydrates have been proposed as a potential technology for a number of applications, such as separation of gas mixtures, CO2 capture, transportation, and sequestration, methane storage and transport, and seawater desalination. Most of these applications will benefit from reduced induction time of hydrate nucleation, enhanced hydrate growth rate, and maximum water-to-hydrate conversion. The addition of surfactants to the gas-water system serves this purpose in a very effective manner. This review focuses on different surfactants that were utilized for gas hydrate formation studies; insights have been provided on the possible mechanisms of action through which these surfactants affect hydrate formation kinetics. A thorough analysis of the existing literature on surfactants suggests that enhanced rate of hydrate nucleation and growth kinetics may not be directly linked to micelle formation. Conversely, reduced surface tension in the presence of surfactants not only enhances the mass transfer but also changes the morphology of hydrate formation, which in turn enhances gas-water interactions for faster hydrate growth rate.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.5b03476}, author = {Kumar, Asheesh and Bhattacharjee, Gaurav and Kulkarni, B. D. and Kumar, Rajnish} } @article { ISI:000355985200027, title = {Role of the molecular structure of carboxylate-alumoxanes in the enhanced nucleation of polypropylene}, journal = {Chemical Communications}, volume = {51}, number = {49}, year = {2015}, month = {MAY}, pages = {10026-10029}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We have reported the use of carboxylate-alumoxanes as efficient nucleating agents for isotactic polypropylene (iPP) with a possible structural correlation to the nucleation efficiency. The unique, butterfly-like structure of carboxylate-alumoxanes correlates well with the nucleation characteristics of iPP and, for the first time, the impact of a thermally induced, crystalline transition of carboxylate-alumoxanes, which alters neither the structural conformation nor the nucleation efficiency of the transformed material, is demonstrated.

}, issn = {1359-7345}, doi = {10.1039/c5cc01327e}, author = {Mani, Mohan Raj and Chellaswamy, Ramesh and Marathe, Yogesh N. and Pillai, Vijayamohanan K.} } @article { ISI:000359654100006, title = {Role of tumor cell surface lysosome-associated membrane protein-1 (LAMP1) and its associated carbohydrates in lung metastasis}, journal = {Journal of Cancer Research and Clinical Oncology}, volume = {141}, number = {9}, year = {2015}, month = {SEP}, pages = {1563-1574}, publisher = {SPRINGER}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Expression of lysosome-associated membrane protein-1 (LAMP1) on the surface correlates with metastatic potential of B16 melanoma cells. Downregulation of their expression in high metastatic (B16F10) cells reduced their surface expression and metastatic potential. Present investigations explore if overexpression of LAMP1 on the surface of low metastatic (B16F1) cells augment their metastatic ability, and if so, how? B16F1 cells were transduced with lentiviral vector carrying mutant-LAMP1 (Y386A) (mutLAMP1). Surface expression of LAMP1 and carbohydrates was analyzed by flow cytometry, immunofluorescence and/or immunoprecipitation and Western blotting. Cell spreading and motility were assessed on components of extracellular matrix (ECM) (fibronectin) and basement membrane (BM) (matrigel), and galectin-3-coated coverslips/plates. Metastatic potential was assessed using experimental metastasis assay. Pre-incubation with anti-LAMP1 antibodies significantly reduced lung metastasis of B16F10 cells. Overexpression of mutLAMP1 significantly increased its surface expression on B16F1 cells, resulting in increased cellular spreading and motility on fibronectin and matrigel. LAMP1 is the major carrier of poly-N-acetyllactosamine (polyLacNAc) on B16F10 cells. However, significantly higher expression of mutLAMP1 had no effect on galectin-3 binding on cell surface or on spreading or motility of cells on galectin-3-coated coverslips/plates. These cells also failed to show any gain in metastatic ability. This could be because LAMP1 from these cells carried significantly lower levels of polyLacNAc in comparison with B16F10 cells. PolyLacNAc on B16F10 cells and galectin-3 on lungs are the major participants in melanoma metastasis. Although surface LAMP1 promotes interactions with organ ECM and BM, carbohydrates on LAMP1 play a decisive role in dictating lung metastasis.

}, keywords = {6 branched N-oligosaccharides, beta 1, Cell surface LAMP1, Galectin-3, Motility, Organ-specific metastasis, Poly-N-acetyllactosamine}, issn = {0171-5216}, doi = {10.1007/s00432-015-1917-2}, author = {Agarwal, Akhil Kumar and Srinivasan, Nithya and Godbole, Rashmi K. and More, Shyam K. and Budnar, Srikanth and Gude, Rajiv P. and Kalraiya, Rajiv D.} } @article {42984, title = {Rottlerin derivatives and other compounds from mallotus philippinensis fruits and their potential antimycobactrial activity}, journal = {Planta Medica Letters}, volume = {2}, year = {2015}, month = {JUN}, pages = {e28-e30}, abstract = {

The methanolic extract of the fruits of Mallotus philippinensis afforded 13 compounds, 7,11-diketo-lanost-3-ol (1, as acetate), lanosta-8-ene-3β-ol (2, as acetate), pregnenolone (3, as acetate), trans-chalcone (4), kamalachalcone E (5), oleanolic acid (6), gallic acid (7), kaempferol (8), myricetin (9), 1-(5,7-dihydroxy-2,2,6-trimethyl-2 H-1-benzopyran-8-yl)-3-phenyl-2-propen-1-one (10), 4'-hydroxyisorottlerin (11), rottlerin (12), and shikimic acid (13). Compound 1 was isolated as a new natural product and its structure was elucidated by 1D and 2D nuclear magnetic resonance analyses including heteronuclear single quantum correlation, heteronuclear multiple-bond correlation, correlation spectroscopy, and nuclear Overhauser effect spectroscopy experiments. All of the isolated compounds were evaluated for their antimycobacterium activity against Mycobacterium tuberculosis H37Ra. Compounds 11 and 12 exhibited promising inhibitory activity with IC50 values of 0.89 {\textpm} 0.33 {\textmu}g/mL (MIC 2.06 {\textpm} 0.41 {\textmu}g/mL) and 7.59 {\textpm} 0.42 {\textmu}g/mL (MIC 11.56 {\textpm} 0.35 {\textmu}g/mL), respectively.

}, doi = {10.1055/s-0035-1557793}, author = {Bhardwaj, Rima and Chinchansure, Ashish A. and Kulkarni, Roshan R. and Arkile, Manisha A. and Sarkar, Dhiman and Joshi, Swati P.} } @article { ISI:000356845000002, title = {Ru-catalyzed redox-neutral cleavage of the N-O bond in isoxazolidines: isatogens to pseudoindoxyls via a one-pot [3+2]-cycloaddition/N-O cleavage}, journal = {Organic Letters}, volume = {17}, number = {12}, year = {2015}, month = {JUN}, pages = {2870-2873}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A novel metal-catalyzed oxygen atom transfer reaction onto olefins is reported. By taking isatogens as substrates, a one-pot [3 + 2]-cycloaddition of nitrone with olefins followed by the Ru-catalyzed redox-neutral N-O bond cleavage of intermediate isoxazolidine has been executed as a simple method for the synthesis of 2,2-disubstituted pseudoindoxyls.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.5b00837}, author = {Kumar, Chepuri V. Suneel and Ramana, Chepuri V.} } @article { ISI:000365462600036, title = {Ruthenium(II)-catalyzed C3 arylation of 2-aroylbenzofurans with arylboronic acids/aryltrifluoroborates via carbonyl-directed C-H bond activation}, journal = {Journal of Organic Chemistry}, volume = {80}, number = {22}, year = {2015}, month = {NOV}, pages = {11551-11558}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The Ru(II)-catalyzed carbonyl-directed C-H activation with (hetero)arylboron reagents has been executed for the synthesis of 2-aroyl-3-(hetero)arylbenzofurans. A hypothesis founded upon the involvement Of an active carbonatoruthenium(II) complex for a coordinative insertion and the aerobic oxidation of the in situ generated Ru(0) to Ru(II), to continue the catalytic cycle, has been extended.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.5b01932}, author = {Paymode, Dinesh J. and Ramana, Chepuri V.} } @article { ISI:000348358200011, title = {Ruthenium(II)-catalyzed switchable C3-alkylation versus alkenylation with acrylates of 2-pyridylbenzofurans via C-H bond activation}, journal = {Catalysis Science \& Technology}, volume = {5}, number = {1}, year = {2015}, month = {OCT}, pages = {114-117}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

We documented an interesting observation of ruthenium (II)-catalyzed benzofuran C-H activation and subsequent functionalization with acrylates that reveals that a simple base can switch the process from alkylation to alkenylation.

}, issn = {2044-4753}, doi = {10.1039/c4cy01268b}, author = {Kommagalla, Yadagiri and Mullapudi, Venkanna Babu and Francis, Fredi and Ramana, Chepuri V.} } @article { ISI:000359951700161, title = {RXR-carbamate - a novel molecular transporter for skin}, journal = {Molecular Therapy}, volume = {23}, number = {1}, year = {2015}, note = {18th Annual Meeting of the American-Society-of-Gene-and-Cell-Therapy (ASGCT), New Orleans, LA, MAY 13-16, 2015}, month = {MAY}, pages = {S64-S64}, publisher = {Amer Soc Gene \& Cell Therapy}, address = {75 VARICK ST, 9TH FLR, NEW YORK, NY 10013-1917 USA}, issn = {1525-0016}, author = {Natarajan, Poornemaa and Patil, Kiran M. and Vij, Manika and Yadav, Amit K. and Kumar, Vaijayanti A. and Ganguli, Munia and Fernandes, Moneesha} } @article {43631, title = {Racemic drug resolution: a comprehensive guide}, journal = {Analytical Methods}, volume = {8}, year = {2016}, month = {OCT}, pages = {7567-7586}, abstract = {The human body is amazingly chirally selective, and consequently enantiopure drugs are essential for treating disease. Nearly 50\% of drugs are chiral wherein pharmacological activity resides with the eutomer (pharmacologically active enantiomer) whereas the distomer (inactive/less potent/equally potent/different pharmacological activity/toxic enantiomer) metabolizes by a different pathway and creates unnecessary burden on the body. A teratogenic (toxic) isomer in a racemic drug creates sideeffects, genetic diseases, or may cause death in the case of high dosage. Nowadays, market approval of enantiopure drugs has increased exponentially whereas it has tremendously decreased for racemic and achiral drugs. An expensive process is the main drawback in obtaining enantiopure drugs. Different methods such as chromatography, spectroscopy, and thermal analysis are available for optical purity determination. However, only a few chromatographic methods are useful on an industrial scale. In the present review, racemic resolution and optical purity determination methods are discussed with examples. In addition to this, eutomers and distomers of different drugs containing a single chiral center are also reported.}, doi = {10.1039/c6ay02015a}, author = {Mane, Sachin} } @article { ISI:000381418000084, title = {Radical attached aluminum nanoclusters: an alternative way of cluster stabilization}, journal = {Physical Chemistry Chemical Physics}, volume = {18}, number = {31}, year = {2016}, month = {AUG}, pages = {21746-21759}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The stability and electronic structure of radical attached aluminum nanoclusters are investigated using density functional theory (DFT). A detailed investigation shows good correlation between the thermodynamic stability of radical attached clusters and the stability of the attached radical anions. All other calculated parameters like HOMO-LUMO gap and charge transfer are also found to be consistent with the observed thermodynamic stabilities of the complexes. Investigation of the electronic structure of radical attached complexes further shows the presence of jellium structures within the core similar to the ligated clusters. Comparison with available experimental and theoretical data also proves the validity of superatomic complex theory for the radical attached clusters as well. Based on the evaluated thermodynamic parameters, selected radical attached clusters are observed to be more thermodynamically stable in comparison with experimentally synthesized ligated clusters. Stabilization of small metal clusters is one of the greatest challenges in current cluster science and the present investigation confirms the fact that radical attached clusters can provide a viable alternative to ligated clusters in the future.

}, issn = {1463-9076}, doi = {10.1039/c6cp03601e}, author = {Sengupta, Turbasu and Pal, Sourav} } @article { ISI:000380182400037, title = {Radical beckmann rearrangement and its application in the formal total synthesis of antimalarial natural product isocryptolepine via C-H activation}, journal = {Organic Letters}, volume = {18}, number = {14}, year = {2016}, month = {JUL}, pages = {3450-3453}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The Beckmann rearrangement of ketoximes, mediated by ammonium persulfate-dimethyl sulfoxide as a reagent, has been achieved under neutral conditions. Based on the radical trapping and O-18-labeling experiments, the transformation follows a mechanism involving a radical pathway. The scope and generality of the developed protocol has been demonstrated by 19 examples. The developed protocol and Pd-catalyzed intramolecular double C-H activation were used as key steps in the formal total synthesis of antimalarial natural product isocryptolepine.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.6b01634}, author = {Mahajan, Pankaj S. and Humne, Vivek T. and Tanpure, Subhash D. and Mhaske, Santosh B.} } @article {43601, title = {Radio-frequency triggered heating and drug release using doxorubicin-loaded LSMO nanoparticles for bimodal treatment of breast cancer}, journal = {Colloids and Surfaces B-Biointerfaces}, volume = {145}, year = {2016}, month = {SEP}, pages = {878-890}, abstract = {Radio-frequency responsive nanomaterials combined with drugs for simultaneous hyperthermia and drug delivery are potential anti-cancer agents. In this study, chitosan coated La0.7Sr0.3MnO3 nanoparticles (C-LSMO NPs) were synthesized and characterized by X-ray diffraction, dynamic light scattering, Fourier transform infra red spectroscopy, vibrating sample magnetometer, scanning electron and atomic force microscopy, Under low radio-frequency (365 kHz, RF), C-LSMO NPs (90 nm) showed good colloidal stability (+22 mV), superparamagnetic nature (15.4 emu/g) and heating capacity (57.4W/g SAR value). Chitosan facilitated doxorubicin entrapment (76\%) resulted in DC-LSMO NPs that showed drug release upon a 5 min RF exposure. MCF-7 and MDA-MB-231 cancer cells responded to a 5 min RF exposure in the presence of bimodal DC-LSMO NPs with a significant decrease in viability to 73\% and 88\% (Pearson correlation, r = 1, P<0.01) respectively, as compared to hyperthermia alone. Internalization of DC-LSMO NPs via the endosomal pathway led to an efficient localization of doxorubicin within the cell nucleus. The ensuing DNA damage, heat shock protein induction, and caspase production triggered apoptotic cell death. Moreover, DC-LSMO NPs successfully restricted the migration of metastatic MDA-MB-231 cancer cells. These data suggest that DC-LSMO NPs are potential bimodal therapeutic agents for cancer treatment and hold promise against disease recurrence and drug resistance. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.colsurfb.2016.06.010}, author = {Kulkarni, Vaishnavi M. and Bodas, Dhananjay and Dhoble, Deepa and Ghormade, Vandana and Paknikar, Kishore} } @article { ISI:000371560100018, title = {Rapid methane hydrate formation to develop a cost effective large scale energy storage system}, journal = {Chemical Engineering Journal}, volume = {290}, year = {2016}, month = {APR}, pages = {161-173}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Natural gas (NG) is the cleanest burning fossil fuel and its usage can significantly reduce CO2 emissions from power plants. With its widespread use, there is an ever increasing need to develop technologies to store NG on a large scale. NG storage via clathrate hydrates is the best option for a large scale storage system because of its non-explosive nature, mild storage conditions, high volumetric capacity and being an environmentally benign process. In this work, we demonstrate a new method to achieve rapid methane hydrate formation in an unstirred tank reactor configuration (UTR) at moderate temperature and pressure conditions employing tetrahydrofuran (THF) as a promoter. For the first time, THF is reported to act both as a thermodynamic and an excellent kinetic promoter for methane hydrate formation. We demonstrate a multi-scale experimental validation of our method to a volumetric sample scale-up factor of 120 and internal reactor diameter scale-up factor of 10. Further, new insights on the dissociation behavior of the hydrates are reported. There is a competitive edge for storing NG via clathrate hydrates compared to compressed natural gas storage both in terms of cost and safety. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {Energy storage, Enhanced kinetics, Gas hydrates, Natural gas storage, Tetrahydrofuran, Unstirred tank reactor}, issn = {1385-8947}, doi = {10.1016/j.cej.2016.01.026}, author = {Veluswamy, Hari Prakash and Wong, Alison Jia Hui and Babu, Ponnivalavan and Kumar, Rajnish and Kulprathipanja, Santi and Rangsunvigit, Pramoch and Linga, Praveen} } @article { ISI:000371566100001, title = {Recent advances in N-heterocyclic carbene (NHC)-catalysed benzoin reactions}, journal = {Beilstein Journal of Organic Chemistry}, volume = {12}, year = {2016}, month = {MAR}, pages = {444-461}, publisher = {BEILSTEIN-INSTITUT}, address = {TRAKEHNER STRASSE 7-9, FRANKFURT AM MAIN, 60487, GERMANY}, abstract = {

N-Heterocyclic carbenes (NHCs) have emerged as a powerful class of organocatalysts that mediate a variety of organic transformations. The Benzoin reaction constitutes one of the earliest known carbon-carbon bond-forming reactions catalysed by NHCs. The rapid growth of NHC catalysis in general has resulted in the development of a variety of benzoin and benzoin-type reactions. An overview of such NHC-catalysed benzoin reactions is presented.

}, keywords = {acyloin reaction, benzoin reaction, N-heterocyclic carbenes, organocatalysis, umpolung}, issn = {1860-5397}, doi = {10.3762/bjoc.12.47}, author = {Menon, Rajeev S. and Biju, Akkattu T. and Nair, Vijay} } @article {42420, title = {Recent advances in N-heterocyclic carbene (NHC)-catalysed benzoin reactions (vol 12, pg 444, 2016)}, journal = {Beilstein Journal of Organic Chemistry}, volume = {12}, year = {2016}, month = {OCT}, pages = {2124-2124}, keywords = {acyloin reaction; benzoin reaction; N-heterocyclic carbenes; organocatalysis; umpolung}, doi = {10.3762/bjoc.12.201}, author = {Menon, Rajeev S. and Biju, Akkattu T. and Nair, Vijay} } @article { ISI:000375837100034, title = {Reclassification of bacillus isronensis shivaji et al. 2009 as solibacillus isronensis comb. nov and emended description of genus solibacillus krishnamurthi et al. 2009}, journal = {International Journal of Systematic and Evolutionary Microbiology}, volume = {66}, number = {5}, year = {2016}, month = {MAY}, pages = {2113-2120}, publisher = {SOC GENERAL MICROBIOLOGY}, address = {MARLBOROUGH HOUSE, BASINGSTOKE RD, SPENCERS WOODS, READING RG7 1AG, BERKS, ENGLAND}, abstract = {

An investigation into the taxonomic position of Bacillus isronensis MTCC 7902(T) revealed that the strain shares a common phylogenetic lineage with Solibacillus silvestris MTCC 10789(T). It displays considerable overlap in phenotypic properties with the genus Solibacillus, including endospore shape and position, oxidase and catalase activities, presence of iso-C-15 : 0, C-16 : (1)omega 7c alcohol and iso-C-17 : 1 omega 7c as major cellular fatty acids, A4 alpha-type cell-wall peptidoglycan, polar lipids and menaquinone pattern. These features reinforce the findings of molecular phylogenetic analyses based on 16S rRNA gene, gyrB gene and 16S-23S internal transcribed spacer (ITS) region sequences and, in line with the recommendations of Kampfer et al. [Int J Syst Evol Microbiol 56 (2006), 781-786], provide justification for the transfer of Bacillus isronensis from the genus Bacillus to Solibacillus as Solibacillus isronensis comb. nov. The type strain is B3W22(T) (=MTCC 7902(T) =DSM 21046(T) =JCM 13838(T)). An emended description of the genus Solibacillus is also provided.

}, issn = {1466-5026}, doi = {10.1099/ijsem.0.000982}, author = {Mual, Poonam and Singh, Nitin Kumar and Verma, Ashish and Schumann, Peter and Krishnamurthi, Srinivasan and Dastager, Syed Gulam and Mayilraj, Shanmugam} } @article {45869, title = {Recursive orthogonal least square based soft sensor for batch distillation}, journal = {Chemical product and process modeling}, volume = {11}, year = {2016}, month = {SEP}, pages = {241-263}, type = {Article}, abstract = {A multiple-input and multiple-output (MIMO) model, namely Recursive Orthogonal Least Square (ROLS) based radial basis function (RBF) is developed to estimate product compositions in a batch distillation process from temperature measurements. The process data is generated by simulating the differential equations of the batch distillation process, changing the initial feed composition and boiluprate from batch to batch. Moreover, the reflux ratio is also randomly varied within each batch to represent the exact dynamics of the batch distillation. Temperature and distillate composition is correlated by the RBF trained by ROLS algorithm. A Single RBF network estimate the quality of products in real-time. The results show that ROLS based estimator give correct composition estimations for a batch distillation process. The robustness of the ROLS algorithm and low computational requirement makes the estimator attractive for on-line use. }, doi = {10.1515/cppm-2015-0071}, author = {Mehta, S. and Ramani, H. and Yelgatte, N. N. and Rahman, I.} } @article {43602, title = {Red mud and li-ion batteries: a magnetic connection}, journal = {Chemsuschem}, volume = {9}, year = {2016}, month = {AUG}, pages = {2193-2200}, abstract = {Exceptional Li-ion battery performance is presented with the oxide component of the anode was extracted from red mud by simple magnetic separation and applied directly without any further processing. The extracted material has -Fe2O3 as the major phase with inter-dispersed phases of Ti, Al, and Si oxides. In a half-cell assembly, the phase displayed a reversible capacity (approximate to 697mAhg(-1)) with excellent stability upon cycling. Interestingly, the stability is rendered by the multiphase constitution of the material with the presence of other electrochemically inactive metal oxides, such as Al2O3, SiO2, and Fe2TiO4, which could accommodate the strain and facilitate release during the charge-discharge processes in the electrochemically active maghemite component. We fabricated the full-cell assembly with eco-friendly cathode LiMn2O4 by adjusting the mass loading. Prior to full-cell assembly, an electrochemical pre-lithiation was enforced to overcome the irreversible capacity loss obtained from the anode. The full-cell delivered a capacity of approximate to 100mAhg(-1) (based on cathode loading) with capacity retention of approximate to 61\% after 2000cycles under ambient conditions.}, doi = {10.1002/cssc.201600561}, author = {Suryawanshi, Anil and Aravindan, Vanchiappan and Madhavi, Srinivasan and Ogale, Satishchandra B.} } @article {45632, title = {Reduced graphene oxide modified electrodes for sensitive sensing of gliadin in food samples}, journal = {ACS Sensors}, volume = {1}, year = {2016}, month = {DEC}, pages = {1462-1470}, type = {Article}, abstract = {

Incidences of food allergies are on the rise, which can greatly affect the well-being of children as well as adults. Intolerance to gluten, a protein composite of gliadin and glutenin, present in wheat, barley, and rye and several cereals, can be the causative agent of celiac disease (CD) and other allergic reactions. A gluten-free diet has become essential for people affected by CD, and consequently, the amount of gluten in food products needs to be strictly controlled. In this paper, we report an electrochemical label-free immunosensor for ultrasensitive and specific detection of gliadin. The sensor takes advantage of the specific properties of porous reduced graphene oxide (prGO) covalently functionalized with anti-gliadin antibodies using 1-pyrenecarboxylic acid as linker molecule. Using differential pulse voltammetry (DPV) and [Fe(CN)6](3-/4-) as a redox probe, a decrease of current is linked to the presence of gliadin. The sensor achieved a detection limit of 1.2 ng mL(-1) over a 1.2-34 ng mL(-1) linear range with high selectivity. The advantages offered by this sensor are the possibility to regenerate the surface of the immunosensor, its rapid and ease of production, as well as applicability for the screening of gliadin concentrations in real food samples, as shown here.

}, keywords = {anti-gliadin antibody, food samples, gliadin, Immunosensor, Porous reduced graphene oxide}, issn = {2379-3694}, doi = {10.1021/acssensors.6b00608}, author = {Chekin, Fereshteh and Singh, Santosh K. and Vasilescu, Alina and Dhavale, Vishal M. and Kurungot, Sreekumar and Boukherroub, Rabah and Szunerits, Sabine} } @article {43403, title = {Reductive cyclization of levulinic acid to gamma-valerolactone over non-noble bimetallic nanocomposite}, journal = {Industrial \& Engineering Chemistry Research}, volume = {55}, year = {2016}, month = {DEC}, pages = {13032-13039}, abstract = {Bimetallic nanoparticles have diverse applications in catalytic processes owing to the differences in individual properties that contribute to their increased catalytic activity. To further improve the efficiency, they are dispersed in an inert support that enhances the catalytic activity toward organic transformations. In this study, we report simple, facile, and cost-effective chemical route for the fabrication of nanocomposites with Fe-Ni bimetallic nanoparticles supported on montmorillonite (MMT) possessing variation in the Fe and Ni content. These composites are characterized with X-ray diffraction, transmission electron microscopy surface area, and NH3-TPD. Fe Ni bimetallic nanoparticles are well-dispersed within MMT structure having particle sizes of about 30-40 nm. Among various compositions of Fe-Ni/MMT catalysts, composite with 25\% Fe and 25\% Ni exhibits >99\% LA conversion with 98\% selectivity to GVL within 1 h. IPA is found to be better solvent for levulinic acid (LA) to gamma-valerolactone (GVL) conversion, while substantial leaching of iron takes place when water is used as a solvent. It is observed that bimetallic sites are responsible for reduction of LA, while strong acidic sites of MMT are favoring subsequent cyclization to GVL. XPS analysis of fresh and reused Fe-Ni/MMT composites suggest that the catalyst surface does not undergo any chemical change during successive cycles, and the catalytic activity is retained up to six cycles. The plausible mechanism for LA to GVL conversion involves reductive cyclization processes through formation of levulinate ester that undergoes lactonization due to synergism in bimetallic nanoparticles and MMT clay.}, doi = {10.1021/acs.iecr.6b03900}, author = {Kadu, Brijesh S. and Hengne, Amol M. and Biradar, Narayan S. and Rode, Chandrashekhar V. and Chikate, Rajeev C.} } @article { ISI:000378392200016, title = {Reductive nitrosylation of nickel(II) complex by nitric oxide followed by nitrous oxide release}, journal = {Dalton Transactions}, volume = {45}, number = {25}, year = {2016}, month = {MAY}, pages = {10200-10208}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

Ni(II) complex of ligand L (L = bis(2-ethyl-4-methylimidazol-5-yl)methane) in methanol solution reacts with an equivalent amount of NO resulting in a corresponding Ni(I) complex. Adding further NO equivalent affords a Ni(I)-nitrosyl intermediate with the {NiNO}(10) configuration. This nitrosyl intermediate upon subsequent reaction with additional NO results in the release of N2O and formation of a Ni(II)-nitrito complex. Crystallographic characterization of the nitrito complex revealed a symmetric eta(2)-O,O-nitrito bonding to the metal ion. This study demonstrates the reductive nitrosylation of a Ni(II) center followed by N2O release in the presence of excess NO.

}, issn = {1477-9226}, doi = {10.1039/c6dt00826g}, author = {Ghosh, Somnath and Deka, Hemanta and Dangat, Yuvraj B. and Saha, Soumen and Gogoi, Kuldeep and Vanka, Kumar and Mondal, Biplab} } @article { ISI:000369545400074, title = {Re-engineering of PIP3-antagonist triazole PITENIN{\textquoteright}s chemical scaffold: development of novel antifungal leads}, journal = {RSC Advances}, volume = {6}, number = {14}, year = {2016}, month = {JAN}, pages = {11691-11701}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

A novel 4-(1-phenyl-1-hydroxyethyl)-1-(o-hydroxyphenyl)-1H-1,2,3-triazole was designed by integrating the structural features of triazole PITENIN anticancer agents and the azole class of antifungal drugs. A two-step protocol comprising the Barbier propargylation and Cu-catalyzed azide-alkyne cycloaddition was established to synthesise a diverse set of compounds of this class. Their screening against a wide range of human fungal pathogens led to identification of several potential antifungal hits and some of them displayed better antifungal activity than fluconazole against Candida glabrata, Cryptococcus neoformans, Aspergillus fumigatus and Aspergillus niger. Mode of action studies revealed that their antifungal activity was resulting either from the inhibition of lanosterol 14 alpha-demethylase enzyme (leading to ergosterol depletion) or by the generation of reactive oxygen species (ROS).

}, issn = {2046-2069}, doi = {10.1039/c5ra25145a}, author = {Pulya, Sravani and Kommagalla, Yadagiri and Sant, Duhita G. and Jorwekar, Shweta U. and Tupe, Santosh G. and Deshpande, Mukund V. and Ramana, Chepuri V.} } @article { ISI:000369771800040, title = {Regioselective oxo-amination of alkenes and enol ethers with N-bromosuccinimide-dimethyl sulfoxide combination: a facile synthesis of alpha-amino-ketones and esters}, journal = {Organic Letters}, volume = {18}, number = {3}, year = {2016}, month = {FEB}, pages = {500-503}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

An unprecedented conversion of alkenes and enol ethers to the corresponding a-imido carbonyl compounds with excellent regioselectivity and yields has been developed. This oxo-amination process employs readily available N-bromosuccinimide (NBS) and secondary amines as N-sources and dimethyl sulfoxide (DMSO) as the oxidant and also leads to the production of amino alcohols in a single step on reduction, thus broadening the scope of this operationally simple reaction. For the first time, the formation of reactive Me2S+-O-Br species generated by the interaction of NBS with DMSO has been proven.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.5b03540}, author = {Prasad, Pragati K. and Reddi, Rambabu N. and Sudalai, Arumugam} } @article { ISI:000377497000004, title = {Relativistic coupled-cluster study of RaF as a candidate for the parity- and time-reversal-violating interaction}, journal = {Physical Review A}, volume = {93}, number = {6}, year = {2016}, month = {JUN}, pages = {062506}, publisher = {AMER PHYSICAL SOC}, address = {ONE PHYSICS ELLIPSE, COLLEGE PK, MD 20740-3844 USA}, abstract = {

We have employed both the Z-vector method and the expectation-value approach in the relativistic coupled-cluster framework to calculate the scalar-pseudoscalar (S-PS) P, T-odd interaction constant W-s and the effective electric field E-eff experienced by the unpaired electron in the ground electronic state of RaF. Further, the magnetic hyperfine structure constants of Ra-223 in RaF and Ra-223(+) are also calculated and compared with the experimental values wherever available to judge the extent of the accuracy obtained with the employed methods. The outcome of our study reveals that the Z-vector method is superior to the expectation-value approach in terms of accuracy obtained for the calculation of ground-state property. The Z-vector calculation shows that RaF has a high Eeff (52.5 GV/cm) and W-s (141.2 kHz), which makes it a potential candidate for the electric dipole moment of the electron (eEDM) experiment. An estimation of uncertainty associated with our final results is made, and it is found that it lies below 10\%.

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.93.062506}, author = {Sasmal, Sudip and Pathak, Himadri and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {42619, title = {Relativistic equation-of-motion coupled-cluster method for the electron attachment problem}, journal = {Computational and Theoretical Chemistry}, volume = {1076}, year = {2016}, month = {JAN}, pages = {94-100}, abstract = {

The article considers the successful implementation of relativistic equation-of-motion coupled cluster method for the electron attachment problem (EA-EOMCC) at the level of single- and double- excitation approximation. The implemented relativistic EA-EOMCC method is employed to calculate ionization potential values of alkali metal atoms (Li, Na, K, Rb, Cs, Fr) and the vertical electron affinity values of LiX (X = H, F, Cl, Br), NaY (Y = H, F, Cl) starting from their closed-shell configuration. Both four component and exact two-component calculations are done for all the opted systems. Further, we have shown the effect of spin-orbit interaction considering the atomic systems. The results of our atomic calculations are compared with the values from the NIST database and the results are found to be very accurate (\<1\%). (C) 2015 Elsevier B.V. All rights reserved.

}, doi = {10.1016/j.comptc.2015.12.015}, author = {Pathak, Himadri and Sasmal, Sudip and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {45870, title = {Relativistic equation-of-motion coupled-cluster method using open-shell reference wavefunction: application to ionization potential}, journal = {Journal of Chemical Physics}, volume = {145}, year = {2016}, month = {AUG}, type = {Article}, chapter = {074110}, abstract = {The open-shell reference relativistic equation-of-motion coupled-cluster method within its four-component description is successfully implemented with the consideration of single- and double- excitation approximations using the Dirac-Coulomb Hamiltonian. At the first attempt, the implemented method is employed to calculate ionization potential value of heavy atomic (Ag, Cs, Au, Fr, and Lr) and molecular (HgH and PbF) systems, where the effect of relativity does really matter to obtain highly accurate results. Not only the relativistic effect but also the effect of electron correlation is crucial in these heavy atomic and molecular systems. To justify the fact, we have taken two further approximations in the four-component relativistic equation-of-motion framework to quantify how the effect of electron correlation plays a role in the calculated values at different levels of theory. All these calculated results are compared with the available experimental data as well as with other theoretically calculated values to judge the extent of accuracy obtained in our calculations. }, doi = {10.1063/1.4960954}, author = {Pathak, H. and Sasmal, S. and Nayak, M. K. and Vaval, N. and Pal, S.} } @article {45871, title = {Relevance of small laboratory animals as models in translational research: challenges and road ahead}, journal = {Journal of Applied Pharmaceutical Science}, volume = {6}, year = {2016}, month = {MAY}, pages = {198-209}, type = {Article}, abstract = {Translational research using small laboratory animals is being done to demonstrate proof of concept, to study pharmacokinetics as well as to understand efficacy and safety of new drug molecules. During the evaluation of a drug candidate, the assessment of efficacy and safety is normally performed in different experiments using various animal models. In such experiments, efficacy is assessed by mimicking the disease state in animal model while safety is investigated in healthy animals. Inventing new drugs using biotechnological and nanotechnological approaches is becoming a major thrust area in drug research. Apart from this, the development of medicine from traditional knowledge like Ayurveda has emerged as major area for drug industry. Use of conventional in-vivo approaches may not prove useful to answer many questions. Transgenic/knock-out/knock-in animals are now getting space in pharmaceutical research for target identification and validation. Predictability of in-vivo research depends on scientific protocols and methods adopted for model selection and development. Various alternative approaches for in-vivo research are being followed. It is a fact that no animal model is 100 \% capable of mimicking the complex human body but still, researchers have not yet found any alternative model which can completely replace in-vivo models. This review is a holistic approach explaining the various animal models being used for translational research, animal ethical issues, alternative approaches available and provides a critical analysis of major issues/challenges faced in translational research using in-vivo approaches. }, doi = {10.7324/JAPS.2016.60531}, author = {Siddiqui, E. A. and Jagdale, P. and Ahire, K. and Jadhav, S. and Khan, S. A. and Bhosle, S. and Pal, A. and Jamdagni, P. and Chaudhari, B.} } @inbook {45872, title = {Remediation of domestic and industrial effluents using algae}, booktitle = {Algal Biorefinery: An Integrated Approach}, year = {2016}, pages = {401-437}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, abstract = {In the environment, microbial activity is considered as one of the most important mechanisms for the abatement of water-borne pollutants. In the natural and anthropogenic environment the wide range of contaminates are not eliminated by single specie but by the complex interaction of a mixed microbial population performing complementary reactions. This principle is very much applicable for the treatment of the industrial and domestic wastewater, which has excess of nitrogenous compounds (N) and phosphates (P). N and P along with various organic pollutants, if not properly treated, would create a devastating impact on natural aquatic ecosystems. Among the many other disturbing impacts, most prevalent is the phenomenon of eutrophication, which is the accumulation of high levels of organic matter and the decomposing organisms, which deplete the oxygen in water, and causing the death of other organisms, such as fish. The excess nutrients in the aquatic ecosystem support the growth of various phytoplanktons. It not only spoils the water quality but also adversely affects the whole aquatic ecosystem. This chapter will address the possibility of effectively utilizing a natural microbial flora/consortium, enriched with the rapidly growing algae for the remediation of polluted water bodies.}, issn = {978-331922813-6;978-331922812-9}, doi = {10.1007/978-3-319-22813-6_18}, author = {Nene, S. N. and Gera, G. and Yewalkar, S. N.} } @article {45877, title = {Removal of arsenite [As(III)] and arsenate [As(V)] ions from wastewater using TFA and TAFA resins: computational intelligence based reaction modeling and optimization}, journal = {Journal of environmental chemical engineering}, volume = {4}, year = {2016}, month = {DEC}, pages = {4275-4286}, type = {Article}, abstract = {Being significantly toxic, removal of arsenic forms an important part of the drinking- and waste-water treatment. Tannin is a polyphenol-rich substrate that efficiently and adsorptively binds to the multivalent metal ions. In this study, tannin-formaldehyde (TFA) and tannin-aniline-formaldehyde (TAFA) resins were synthesized and employed successfully for an adsorptive removal of arsenite [As(III)] and arsenate [As(V)] ions from the contaminated water. Next, a computational intelligence (CI) based hybrid strategy was used to model and optimize the resin-based adsorption of As(III) and As(V) ions for securing optimal reaction conditions. This strategy first uses an exclusively reaction data driven modeling strategy, namely, genetic programming (GP) to predict the extent (\%) of As(III)/As(V) adsorbed on TFA and TAFA resins. Next, the input space of the GP-based models consisting of the reaction condition variables/parameters was optimized using genetic algorithm (GA) method; the objective of this optimization was to maximize the adsorption of As(III) and As(V) ions on the two resins. Finally, the sets of optimal reaction conditions provided by GP-GA hybrid method were verified experimentally the results of which indicate that the optimized conditions have lead to 0.3\% and 1.3\% increase in the adsorption of As(III) and As(V) ions on TFA resin. More significantly, the optimized conditions have increased the adsorption of As(III) and As(V) on TAFA resin by 3.02\% and 12.77\%, respectively. The GP-GA based strategy introduced here can be gainfully utilized for modeling and optimization of similar type of contaminant-removal processes. }, doi = {10.1016/j.jece.2016.09.030}, author = {Patil-Shinde, V. and Mulani, K. B. and Donde, K. and Chavan, N. N. and Ponrathnam, S. and Tambe, S. S.} } @article { ISI:000381235800004, title = {Replica exchange molecular dynamics study of dimerization in prion protein: multiple modes of interaction and stabilization}, journal = {Journal of Physical Chemistry B}, volume = {120}, number = {30}, year = {2016}, month = {AUG}, pages = {7332-7345}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

The pathological forms of prions are known to be a result of misfolding, oligomerization, and aggregation of the cellular prion. While the mechanism of misfolding and aggregation in prions has been widely studied using both experimental and computational tools, the structural and energetic characterization of the dimer form have not garnered as much attention. On one hand dimerization can be the first step toward a nucleation-like pathway to aggregation, whereas on the other hand it may also increase the conformational stability preventing self-aggregation. In this work, we have used extensive all-atom replica exchange molecular dynamics simulations of both monomer and dimer forms of a mouse prion protein to understand the structural, dynamic, and thermodynamic stability of dimeric prion as compared to the monomeric form. We show that prion proteins can dimerize spontaneously being stabilized by hydrophobic interactions as well as intermolecular hydrogen bonding and salt bridge formation. We have computed the conformational free energy landscapes for both monomer and dimer forms to compare the thermodynamic stability and misfolding pathways. We observe large conformational heterogeneity among the various modes of interactions between the monomers and the strong intermolecular interactions may lead to as high as 20\% beta-content. The hydrophobic regions in helix-2, surrounding coil regions, terminal regions along with the natively present beta-sheet region appear to actively participate in prion-prion intermolecular interactions. Dimerization seems to considerably suppress the inherent dynamic instability observed in monomeric prions, particularly because the regions of structural frustration constitute the dimer interface. Further, we demonstrate an interesting reversible coupling between the Q160-G131 interaction (which leads to inhibition of beta-sheet extension) and the G131-V161 H-bond formation.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.6b03690}, author = {Chamachi, Neharika G. and Chakrabarty, Suman} } @article { ISI:000373762400005, title = {Reporter nanoparticle that monitors its anticancer efficacy in real time}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {113}, number = {15}, year = {2016}, month = {APR}, pages = {E2104-E2113}, publisher = {NATL ACAD SCIENCES}, address = {2101 CONSTITUTION AVE NW, WASHINGTON, DC 20418 USA}, abstract = {

The ability to monitor the efficacy of an anticancer treatment in real time can have a critical effect on the outcome. Currently, clinical readouts of efficacy rely on indirect or anatomic measurements, which occur over prolonged time scales postchemotherapy or postimmunotherapy and may not be concordant with the actual effect. Here we describe the biology-inspired engineering of a simple 2-in-1 reporter nanoparticle that not only delivers a cytotoxic or an immunotherapy payload to the tumor but also reports back on the efficacy in real time. The reporter nanoparticles are engineered from a novel two-staged stimuli-responsive polymeric material with an optimal ratio of an enzyme-cleavable drug or immunotherapy (effector elements) and a drug function-activatable reporter element. The spatiotemporally constrained delivery of the effector and the reporter elements in a single nanoparticle produces maximum signal enhancement due to the availability of the reporter element in the same cell as the drug, thereby effectively capturing the temporal apoptosis process. Using chemotherapy-sensitive and chemotherapy-resistant tumors in vivo, we show that the reporter nanoparticles can provide a real-time noninvasive readout of tumor response to chemotherapy. The reporter nanoparticle can also monitor the efficacy of immune checkpoint inhibition in melanoma. The self-reporting capability, for the first time to our knowledge, captures an anticancer nanoparticle in action in vivo.

}, keywords = {chemotherapy, immunotherapy, monitoring, nanoparticle, reporter}, issn = {0027-8424}, doi = {10.1073/pnas.1603455113}, author = {Kulkarni, Ashish and Rao, Poornima and Natarajan, Siva and Goldman, Aaron and Sabbisetti, Venkata S. and Khater, Yashika and Korimerla, Navya and Chandrasekar, Vineethkrishna and Mashelkar, Raghunath Anant and Sengupta, Shiladitya} } @article {42900, title = {Repurposing of a drug scaffold: identification of novel sila analogues of rimonabant as potent antitubercular agents}, journal = {European Journal of Medicinal Chemistry}, volume = {122}, year = {2016}, month = {OCT}, pages = {723-730}, abstract = {

The structural similarity between an MmpL3 inhibitor BM212, and a cannabinoid receptor modulator rimonabant, prompted us to investigate the anti-tubercular activity of rimonabant and its analogues. Further optimization, particularly through incorporation of silicon into the scaffold, resulted in new compounds with significant improvement in anti-tubercular activity against Mycobacterium tuberculosis (H37Rv). The sila analogue 18a was found to be the most potent antimycobacterial compound (MIC, 31 ng/mL) from this series with an excellent selectivity index. (C) 2016 Elsevier Masson SAS. All rights reserved.

}, doi = {10.1016/j.ejmech.2016.07.009}, author = {Ramesh, Remya and Shingare, Rahul D. and Kumar, Vinod and Anand, Amitesh and Swetha, B. and Veeraraghavan, Sridhar and Viswanadha, Srikant and Ummanni, Ramesh and Gokhale, Rajesh S. and Reddy, D. Srinivasa} } @article { ISI:000374876700814, title = {Repurposing of old drugs: identification of novel sila analogues of rimonabant as potent antitubercular agents}, journal = {International Journal of Infectious Diseases}, volume = {45}, number = {1}, year = {2016}, month = {APR}, pages = {407-408}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, issn = {1201-9712}, doi = {10.1016/j.ijid.2016.02.870}, author = {Ramesh, R. and Shingare, R. and Anand, Amitesh and Veeraraghavan, S. and Viswanadha, S. and Ummanni, R. and Gokhale, R. and Reddy, D. S.} } @article { ISI:000374349600022, title = {Residue dependent hydrogen-bonding preferences in orthanilic acid-based short peptide beta-turn motifs}, journal = {RSC Advances}, volume = {6}, number = {42}, year = {2016}, month = {MAR}, pages = {35328-35331}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

This communication describes the competition between native beta-turn (C10) and 2-aminobenzenesulfonic acid (SAnt)( orthanilic acid)-based pseudo beta-turn (C11) in their hybrid peptides. Solid-state crystal structure and solution-state NMR studies revealed that C10 and C11 can be simultaneously observed under appropriate conditions. The variable temperature NMR coefficient data suggest that the isolated C11/C14 hydrogen bond is weaker in comparison with the consecutive C10 and C11 turns.

}, issn = {2046-2069}, doi = {10.1039/c6ra05684a}, author = {Jedhe, Ganesh S. and Vijayadas, Kuruppanthara N. and Kotmale, Amol S. and Sangtani, Ekta and Shinde, Dinesh R. and Gonnade, Rajesh G. and Rajamohanan, Pattuparambil R. and Sanjayan, Gangadhar J.} } @article { ISI:000373481000005, title = {Restricted diet breadth of the larvae of antheraea assamensis and the role of the labrum-epipharynx and galeal sensilla}, journal = {Entomological Research}, volume = {46}, number = {2}, year = {2016}, month = {MAR}, pages = {128-138}, publisher = {WILEY-BLACKWELL}, address = {111 RIVER ST, HOBOKEN 07030-5774, NJ USA}, abstract = {

The silkworm, Antheraea assamensisHelfer (Lepidoptera: Saturniidae), grows primarily on Persea bombycina and Litsea polyantha. To understand if the restricted diet breadth is due to the specific role of gustatory sensilla of the larvae of A.assamensis, the same fifth instar larvae retaining only labrum-epipharynx or galeal sensilla were subjected to food choice tests. The foods used were leaves of two host-plant and two non-host-plant species. Mean per cent consumption and per cent of choosing larvae were used as parameters for drawing conclusions. The finding indicated involvement of the labrum-epipharynx for acceptance and galeal sensilla for rejection of a non-host-plant species. Scanning electron microscope studies revealed the presence of two sensilla on the galea, one lateral and one medial sensilla styloconicum and two gustatory sensilla in the epipharynx of A.assamensis. The study revealed the key role of galeal sensilla in the restrictive diet-breadth of A.assamensis.

}, keywords = {food choice, galea, gustatory organs, labrum}, issn = {1738-2297}, doi = {10.1111/1748-5967.12159}, author = {Bora, Dipsikha S. and Deka, Bhabesh and Sen, Avolikiteswar} } @article { ISI:000371664700022, title = {Rhodium-catalyzed ortho C-H bond activation of arylamines for the synthesis of quinoline carboxylates}, journal = {Organic \& Biomolecular Chemistry}, volume = {14}, number = {10}, year = {2016}, month = {FEB}, pages = {2969-2977}, publisher = {ROYAL SOC CHEMISTRY}, address = {THOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND}, abstract = {

The rhodium catalyzed annulation of anilines with alkynic esters allowing for the high-yield synthesis of quinoline carboxylates with excellent regioselectivity is described. This unprecedented reaction employs either formic acid as the C1 source and reductant or copper(II) as the oxidant and is proposed to proceed via rhodacycle of in situ generated amide and enamine ester followed by ortho C-H activation of arylamines with rhodium as the catalyst.

}, issn = {1477-0520}, doi = {10.1039/c6ob00170j}, author = {Gadakh, Sunita K. and Dey, Soumen and Sudalai, A.} } @article {43589, title = {RNAi of selected candidate genes interrupts growth and development of Helicoverpa armigera}, journal = {Pesticide Biochemistry and Physiology}, volume = {133}, year = {2016}, month = {OCT}, pages = {44-51}, abstract = {Helicoverpa armigera is one of the major crop pests and is less amenable to current pest control approaches. RNA interference (RNAi) is emerging as a potent arsenal for the insect pest control over current methods. Here, we examined the effect on growth and development in H. armigera by targeting various enzymes/proteins such as proteases like trypsins (HaTry2, 3, 4 and 6), chymotrypsin (HaChy4) and cysteine protease like cathepsin (HaCATHL); glutathione S-transferases (HaGST1a, 6 and 8); esterases (HaAce4, HaJHE); catalase (HaCAT); super-oxide-dismutase (HaCu/ZnSOD); fatty acid binding protein (HaFabp) and chitin deacetylase (HaCda5b) through dsRNA approach. Significant downregulation of cognate mRNA expression and reduced activity of trypsin and GST-like enzyme were evident upon feeding candidate dsRNAs to the larvae. Among these, the highest mortality was observed in HaAce4 dsRNA fed larvae followed by HaJHE; HaCAT; HaCuZnSOD; HaFabp and HaTry3 whereas remaining ones showed relatively lower mortality. Furthermore, the dsRNA fed larvae showed significant reduction in the larval mass and abnormalities at the different stages of H. armigera development compared to their control diets. For example, malformed larvae, pupae and moth at a dose of 60 pg/day were evident in high number of individual insects fed on dsRNA containing diets. Moreover, the growth and development of insects and moths were retarded in dsRNA fed larvae. These findings might provide potential new candidates for designing effective dsRNA as pesticide in crop protection. (C) 2016 Elsevier Inc. All rights reserved.}, doi = {10.1016/j.pestbp.2016.03.006}, author = {Chikate, Yojana R. and Dawkar, Vishal V. and Barbole, Ranjit S. and Tilak, Priyadarshini V. and Gupta, Vidya S. and Giri, Ashok P.} } @article {43579, title = { Robust highly flexible all-solid-state micro pseudocapacitor based on ternary oxide CuCo2O4 having ultrathin porous nanowall type morphology blended with CNT}, journal = {Chemistryselect}, volume = {1}, year = {2016}, month = {OCT}, pages = {5159-5164}, abstract = {In this work we demonstrate a facile approach to the fabrication of all solid state flexible interdigitated micro pseudocapacitor device using pre-synthesized CuCo2O4 (CCO) ternary metal oxide as the electrode material. The hydrothermally synthesized CCO exhibits a peculiar 3D interconnected aligned porous nanowall type morphology which is highly desirable for storage as well as charge transfer. The device is fabricated using CO2 laser scribing technique and the PVA-H3PO4 gel electrolyte is used as the electrolyte. The as-synthesized CCO as well as its blend with 10 wt.\% CNT are examined for the electrochemical performance. CNT blending is shown to reduce the charge transfer resistance dramatically, thereby enhancing the pseudo capacitance. The areal capacitance of 2.29 mF cm(-2) is obtained from the solid state device. Moreover, the CCO-CNT electrode also shows a high stability upto 9000 cycles without a sign of further decay. Importantly, the devices also retain over 65\% of their initial capacitance after 1000 large angle (608) bending cycles and 93\% of the initial capacitance under 1208 bending condition, thanks to the mechanical flexibility afforded by CNTs without disrupting conducting paths.}, doi = {10.1002/slct.201601348}, author = {Basu, Aniruddha and Bhardwaj, Monika and Gawli, Yogesh and Rode, Chandrasekhar V. and Ogale, Satishchandra B.} } @article {43591, title = {Role of acceptor strength on OFET properties of small molecular organic semiconducting materials with D-A-D architecture}, journal = {Synthetic Metals}, volume = {220}, year = {2016}, month = {OCT}, pages = {236-246}, abstract = {Two organic semiconducting materials 2,5-didodecyl-3,6-bis(4-(11-dodecyl-11H-benzo[a]carbazol-8yl)phenyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione. (BCDPP) and 1,5-didodecyl-3,7-bis(4-(11-dodecyl-11H-benzo[a]carbazol-8-yl)phenyl)dipyrrolo[3,2-b:3{\textquoteright},2{\textquoteright}-e]pyrazine-2,6(1H,5H)-dione (BCPzDP) with D-A-D architecture have been designed, synthesized and well characterized. Both the materials have benzocarbazole donor end-capping units. While BCDPP contains well explored diketopyrrolopyrrole (DPP), BCPzDP possesses electron deficient dipyrrolopyrazinedione (PzDP) as acceptor moiety. The importance of the nature of acceptor moiety in tuning the charge transport properties of the synthesized materials is explored. Thermal, photo-physical and electrochemical properties of these materials are measured and solution processed OFETs are fabricated. OFETs with BCDPP show unipolar p-type semiconducting properties with hole mobility of 1.02 x 10(-4) cm(2) V-1 s(-1) and OFETs of BCPzDP exhibit ambipolar charge transport behaviour with optimal saturation hole and electron mobilities of 0.0054 and 0.0013 cm(2) V-1 s(-1), respectively. (C) 2016 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.synthmet.2016.06.006}, author = {Sasikumar, M. and Bharath, D. and Kumar, G. Siva and Chereddy, Narendra Reddy and Chithiravel, S. and Krishnamoorthy, K. and Shanigaram, Balaiah and Bhanuprakash, K. and Rao, V. Jayathirtha} } @article {43592, title = {Role of aliasing and interacting factors in the enhanced production of dehalogenase from Yarrowia lipolytica for degradation of brominated compounds}, journal = {Journal of Industrial and Engineering Chemistry}, volume = {41}, year = {2016}, month = {SEP}, pages = {114-121}, abstract = {Use of persistent organobromines for industrial applications has led to their accumulation in environment. Yarrowia lipolytica NCIM 3589, a tropical marine yeast, degrades and detoxifies bromocompounds by an initial hydrolytic step. By optimizing culture conditions with 1-bromodecane as reference compound, the dehalogenase involved was remarkably enhanced 13-fold (384.13 U/ml) by a hybrid statistical Plackett-Burman and Box-Behnken design of experiments. Studies bring out in a novel way the role of aliasing and other masked interactions in growth media factors. Importantly, the enzyme acted on C3-C16 bromoalkanes and bromoaromatics, thereby generalizing the {\textquoteright}green chemistry{\textquoteright} applicability of optimized media formulation for biotechnological applications. (C) 2016 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.}, doi = {10.1016/j.jiec.2016.07.015}, author = {Vatsal, Aakanksha and Potdar, Chirag and Smita S. Zinjarde and Kumar, V. Ravi and Kulkarni, Bhasker D. and RaviKumar, Ameeta} } @article { ISI:000370489600002, title = {Role of aliphatic hydrocarbon content in non-solvating porogens toward porosity of cross-linked microbeads}, journal = {Polymer}, volume = {86}, year = {2016}, month = {MAR}, pages = {8-14}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Megaporous spherical acrylate copolymer beads were synthesized by suspension polymerization using non-solvating porogens. Non-solvating porogens with higher aliphatic hydrocarbon content generated megaporous morphology with lower surface area. Surface area increased and inversely megaporosity was decreased with decrease in the aliphatic hydrocarbon content of porogen. Megaporosity (5.47 mu m) and pore volume of 5.52 cm(3)/g was obtained with n-decanol. Thermal property of copolymer is a function of type (rigidity/flexibility/elemental composition) and concentration (cross-link density) of monomer and cross-linker. Copolymer containing rigid cross-linker (divinylbenzene) had better thermal stability over copolymer with flexible cross-linker (ethylene dimethacrylate). Further, higher concentration of rigid cross-linker or lower concentration of flexible cross-linker enhanced the thermal stability. Porous polymers are potentially recognized as a solid support for solid-phase synthesis. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Cross-linked microbeads, Interfacial tension, Megaporosity, Non-solvating porogens, Thermal properties}, issn = {0032-3861}, doi = {10.1016/j.polymer.2016.01.022}, author = {Mane, Sachin and Badiger, Manohar V. and Rajan, C. R. and Ponrathnam, Surendra and Chavan, Nayaku} } @article {45873, title = {Role of helical spring locked washer in bolted join tanalysis: A review}, journal = {International Journal of Structural Integrity}, volume = {7}, year = {2016}, month = {JUN}, pages = {346-358}, type = {Article}, abstract = {Purpose-The purpose of this paper is to give a brief introduction of helical spring locked washer along with extensive literatures survey on role of helical spring locked washer in bolted joint analysis. It is very small component of bolted joint assembly, but it play vital role in holding the assembly components together. Helical shape of it produces spring effect in the assembly which is used for keeping the assembly in tension and that is lock the assembly under dynamic loading due to vibrations to avoid the accident. Design/methodology/approach-The critical literatures survey identifies role of helical spring locked washer in different areas such as design optimization, mechanism of loosening-resistant components, bolted joint analysis, finite element-based modeling, analysis and simulation. The related literatures show contribution of helical spring washers in evaluation of anti-loosening performance of assemblies as compare to other types of washers. Findings-It proposed that design optimization of helical spring locked washer is needed as it improves the performance in the form of load-deflection characteristics, load bearing capacity and provides the best locking force for optimize functionality. Originality/value-The originality or value of this paper is to finding research gaps in literatures by dividing literatures into seven different research areas and concentrating the only on role of helical spring locked washer in bolted joint analysis. }, doi = {10.1108/IJSI-04-2015-0012}, author = {Wagh, H. K. and Desale, G. R. and Tripathi, K.} } @article { ISI:000377239000034, title = {Role of primary and secondary surfactant layers on the thermal conductivity of lauric acid coated magnetite nanofluids}, journal = {Journal of Physical Chemistry C}, volume = {120}, number = {21}, year = {2016}, month = {JUN}, pages = {11640-11651}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Lauric (dodecanoic) acid coated magnetite nanoparticles with different amounts of primary and secondary surfactant layers on the surface of the nanoparticles have been synthesized. Two sets of the surfactant coated nanoparticles are prepared; one with a comparable amount of primary surfactant and the other with a comparable amount of secondary surfactant. Nanofluids are prepared by dispersing the surfactant coated nanoparticles in toluene. Stability of the nanofluids is found to decrease with increasing amount of secondary surfactant on the surface of the nanoparticles, due to the increased hydrophilic nature of the particles in the nonpolar solvent. Thermal conductivity and viscosity of the nanofluids are found to increase with increasing amount of the secondary surfactant layer on the surface of the nanoparticles. The enhanced thermal conductivity for fluids with particles having a larger amount of secondary surfactant is ascribed to the lower dispersibility of the particles in toluene due to the exposure of the acid group of the surfactant to the hydrophobic solvent, leading to aggregation of the particles. Only a small increase in the thermal conductivity is observed for fluids with a larger amount of primary surfactant on the surface of the nanoparticles due to the increased dispersibility owing to the large number of hydrophobic tail groups of the surfactant. A larger enhancement in the thermal conductivity is observed in the presence of a small magnetic field for the fluids containing particles with a lower amount of the secondary surfactant. The overall results suggest that the thermal conductivity of the nanofluids depend on the amount and nature of the primary and secondary surfactants on the dispersed particles which in turn determine the interaction between the base fluid and the surfactant and therefore the dispersibility and stability of the nanofluids.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.5b12476}, author = {Lenin, Ramanujam and Joy, Pattayil Alias} } @conference {45823, title = {Role of Rhamnolipid: A biosurfactant in methane gas hydrate formation kinetics}, booktitle = {Proceedings of The First International Conference on Recent Advances in Bioenergy Research}, year = {2016}, month = {FEB}, publisher = {Sardar Swaran Singh Natl Inst Bio-Energy}, organization = {Sardar Swaran Singh Natl Inst Bio-Energy}, address = {7th Floor, Vijaya Building, 17, Barakhamba Rd, New Delhi, 110 001, India}, abstract = {

Naturally occurring methane gas hydrate is a vast source of methane gas which is trapped in crystalline ice-like structure present in permafrost regions and under the sea in outer continental margins. It is purposed that total amount of carbon in the form of methane hydrates is almost twice the carbon content in all the fossil fuel reserves put together, and hence these are supposed to be the future potential energy resource. This paper investigates the laboratory investigations on effect of a biosurfactant rhamnolipid on methane hydrate formation kinetics. Rhamnolipid was produced by Pseudomonas aeruginosa strain A11. The presence of P. aeruginosa has been reported in Gulf of Mexico gas hydrate samples. Biosurfactant reduced the surface tension of water from 72 to 36 mN/m with CMC of 70 mg/L. The biosurfactant dose is studied at two different concentrations in the solution at 100 and 1000 ppm. Kinetic of hydrate formation and growth is compared at 0, 100, and 1000 ppm of rhamnolipid showing that rhamnolipid acts as a hydrate promoter at these concentrations. Thus, small dosages of rhamnolipids produced by P. aeruginosa strain A11 must clearly affect the gas hydrate formation kinetics in natural sites (as in Gulf of Mexico).

}, keywords = {Induction time, methane hydrate, Potential energy resource, Pseudomonas aeruginosa, Rhamnolipid}, isbn = {978-81-322-2773-1; 978-81-322-2771-7}, doi = {10.1007/978-81-322-2773-1_25}, author = {Arora, Amit and Cameotra, Swaranjit Singh and Kumar, Rajnish and Singh, Anil Kumar and Kumar, Pushpendra and Balomajumder, Chandrajit and Laik, Sukumar}, editor = {Kumar, S and Khanal, SK and Yadav, YK} } @article { ISI:000374626200020, title = {Role of surface synergistic effect on the performance of Ni-based hydrotalcite catalyst for highly efficient hydrogenation of furfural}, journal = {Journal of Molecular Catalysis A-Chemical}, volume = {417}, year = {2016}, month = {JUN}, pages = {153-162}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

The selective vapor phase hydrogenation of furfural at ambient pressure has been investigated using a facile and robust hydrotalcite derived Ni containing mixed oxide catalyst. The systematic characterization results conferred that the difficulty in the reduction of Ni species due to the strong interaction between Ni and support, which facilitated from the homogeneous distribution of hydrotalcite structure. It was also found that the structure and catalytic performance of the catalysts were greatly influenced by Ni loading. Through fine-tuned surface elemental sites and reaction conditions, furfural conversion of 98\% with 95\% of furfuryl alcohol selectivity was achieved over a MAN-2 catalyst containing two molar ratio of Ni. The results have demonstrated that the incorporation of Mg significantly enhances the Ni-support interaction, Ni dispersion and catalytic performance. The high efficiency of the Ni-based hydrotalcite derived catalyst was mainly attributed to the surface synergistic interaction between the catalytically active metallic Ni sites and the strong basic sites, which furnished an eco-benign and sustainable catalyst for the selective hydrogenation of furfural. Furthermore, the spent catalyst analysis substantiated that no significant difference in the catalyst phase was observed even after 48 h of reaction stream. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {alcohol-hydrotalcites-selective, Biomass-frurfural-furfuryl, Hydrogenation}, issn = {1381-1169}, doi = {10.1016/j.molcata.2016.03.019}, author = {Manikandan, Marimuthu and Venugopal, Ashok Kumar and Prabu, Kandasamy and Jha, Ratnesh Kumar and Thirumalaiswamy, Raja} } @article { ISI:000375520100009, title = {RuO2 center dot nH(2)O nanoparticles anchored on carbon nano-onions: an efficient electrode for solid state flexible electrochemical supercapacitor}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {4}, number = {5}, year = {2016}, month = {MAY}, pages = {2528-2534}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

A flexible solid state electrochemical capacitor based on hydrous RuO2 nanoparticles, supported onto the nonporous and highly accessible ion adsorptive carbon nano onions (CNOs), is fabricated in a novel process of modifying a conducting carbon paper to a flexible conducting substrate, separated with a poly(vinyl alcohol)/H2SO4 gel electrolyte. The sol-gel technique tends to form homogeneously dispersed RuO2 nanoparticles with the average size of similar to 2.3 nm on the positive surface curvatures of multilayer fullerene (CNOs), which helps the high diffusivity of ions in both the aqueous and solid state gel electrolytes. The flexible substrate worked excellently as an electrical conductor as well as a stable mechanical support. This solid state flexible energy storage device showed a maximum energy density of 10.62 Whkg(-1) and a maximum power density of 4.456 kWkg(-1) for the hydrous RuO2/CNOs nanocomposite with 94.47\% cycling stability even after 4000 cycles.

}, keywords = {Carbon nano-onions, Electrochemical capacitor, Flexible conducting substrate, Flexible energy storage device, Hydrous ruthenium oxide nanoparticles}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.5b01627}, author = {Muniraj, Vedi Kuyil Azhagan and Kamaja, Chaitanya Krishna and Shelke, Manjusha V.} } @article {45633, title = {Ru-TiO2 semiconducting nanoparticles for the photo-catalytic degradation of bromothymol blue}, journal = {Journal of Materials Science-Materials in Electronics}, volume = {27}, year = {2016}, month = {DEC}, pages = {13065-13074}, type = {Article}, abstract = {

Photo-catalytic degradation of bromothymol blue (BTB) in an aqueous medium by Ru-TiO2 using UVC (254 nm) irradiation was investigated for a pH range of 4.0-8.0. The liquid impregnation method was used to synthesize 0.2, 0.4 and 0.8 \% ruthenium doped TiO2 (Ru-TiO2) nanoparticles. The characterizations of resulting nanoparticles were done using X-ray diffraction, scanning electron microscopy, fourier transform infrared spectroscopy, transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy analysis. The crystallite sizes of doped and undoped nanoparticles were determined from X-ray diffraction spectra using Scherrer equation. The average crystallite size of undoped TiO2 was found to be 17.00 nm, whereas the crystallite sizes of 0.2, 0.4 and 0.8 \% Ru-TiO2 were 16.67, 15.70 and 14.40 nm respectively. The TEM images confirm the particle sizes to be 10-40 nm. Pseudo-first order rate constants (k(obs)) determined were found to decrease with increase in pH. The effect of BTB Concentration, catalyst dosage, a percentage of doping of photo catalyst, pH and UV light intensity of BTB on the degradation rate were also examined.

}, issn = {0957-4522}, doi = {10.1007/s10854-016-5449-6}, author = {Kulkarni, R. M. and Malladi, R. S. and Hanagadakar, M. S. and Doddamani, M. R. and Santhakumari, B. and Kulkarni, S. D.} } @article {43775, title = {Rapid synthesis of highly monodispersed silver nanoparticles from the leaves of Salvadora persica}, journal = {Materials Letters}, volume = {205}, year = {2017}, month = {OCT}, pages = {226-229}, type = {Article}, abstract = {We have demonstrated a one pot green protocol for the synthesis of highly monodispersed silver nanoparticles using leaves of Salvadora persica plant. When the leaf extract of Salvadora persica plant reacted with silver nitrate (AgNO3) solution it resulted in the synthesis of highly monodispersed silver nanoparticles with an average size of 3 nm. These nanoparticles were then completely characterized by UV-Visible spectroscopy, Transmission Electron Microscopy, Energy Dispersive Analysis of X-Rays, X-ray diffraction analysis and Fourier Transform Infrared analysis. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.matlet.2017.06.089}, author = {Khan, Mamatha R. Shadab and Salunkhe, Pooja and Satpute, Shruti and Kendurkar, Shuchishweta and Prabhune, Asmita and Deval, Animesh and Chaudhari, Bhushan P.} } @article {45742, title = {Ratiometric sensor for DNA based on a dual emission Ru(dppz) light-switch complex}, journal = {Dalton Transactions}, volume = {46}, year = {2017}, month = {MAY }, pages = {6079-6086}, type = {Article}, abstract = {

Herein we describe the DNA binding properties of two new water-soluble ruthenium complexes; experimental and computational data reveal that both complexes display dual emission from MLCT and LLCT excited states. The interaction of the new complexes with DNA was also investigated. Although one of the complexes only binds DNA though groove binding, the second complex has separate ligands capable of groove binding and intercalation. Nevertheless, it was found that both complexes interact with duplex DNA with high affinity. DNA induced distinctive changes in the emission of the complexes; although the groove binding complex only displays a modest increase in emission on binding, the complex that contains the intercalating Ru-II(dppz) moiety displays a large increase in MLCT-based emission on DNA binding while emission from the LLCT excited state is unaffected. This means that the complex functions as the first ratiometric sensor for DNA.

}, issn = {1477-9226}, doi = {10.1039/c7dt00801e}, author = {Walker, Michael G. and Ramu, Vadde and Meijer, Anthony J. H. M. and Das, Amitava and Thomas, Jim A.} } @article {43495, title = {Reaction engineering of urea alcoholysis: alkyl carbamates}, journal = {Indian Journal of Chemical Technology}, volume = {24}, year = {2017}, month = {JAN}, pages = {9-19}, abstract = {Urea alcoholysis is a reversible reaction generating alkyl carbamate and ammonia as products. The reaction can be performed non-catalytically or in presence of catalyst. The first step in Reaction engineering analysis is to finalize the reactor configuration. In this case it is important to determine the necessity of reactive separation (simultaneous reaction and separation). This has been addressed by first establishing the reversibility of the reaction through theoretical and experimental investigation. Based on this analysis, an experimental setup comprising tubular reactor and a separator has been built. Experiments have been performed for different alcohols at different flow rates and temperatures. The experimental data is used to establish kinetic parameters. Systematic reaction engineering analysis based on multi-stage ideal reactors with and without simultaneous mass transfer is then carried out in terms of three dimensionless numbers. The analysis presented in this work can be readily applied to a general class of reversible reactions with volatile products and the methodology can be used to develop and design reactors for them. The approach and results presented here will be useful to establish optimal reactor configuration and design for urea alcoholysis reactions.}, author = {Mote, Dhananjay R. and Ranade, Vivek V.} } @article {43476, title = {Reactive distillation for the production of methoxy propyl acetate: experiments and simulation}, journal = {Industrial \& Engineering Chemistry Research}, volume = {56}, year = {2017}, month = {FEB}, pages = {832-843}, abstract = {Propylene glycol methyl ether acetate is an industrially important solvent. In this work, we study the applicability of reactive distillation (RD) for its synthesis in the presence of an ion-exchange resin, Amberlyst 15, as a catalyst. Simultaneous separation of water during the course of reaction shifts the reaction in the forward direction, which renders cost effectiveness and compactness to the process. The presence of an azeotrope between methoxy propanol and water complicates the separation, leading to a loss of reactants in the product streams, thereby hampering both conversion and purity. Toluene is thus used as an entrainer to further intensify the process. In this work, the intrinsic kinetic parameters are determined from batch reactor data, and used subsequently to simulate the column performance. An experimentally validated simulator is used to examine the effect of various operating and design parameters. Reactant and product losses are minimized to negligible levels and a significant increase in the conversion is realized.}, doi = {10.1021/acs.iecr.6b03489}, author = {Gadekar-Shinde, Shambala and Reddy, Bhoja and Khan, Mohammad and Chavan, Sanjay and Saini, Dauiat and Mahajani, Sanjay} } @article {43810, title = {Reactivity of difunctional polar monomers and ethylene copolymerization: a comprehensive account}, journal = {Macromolecules}, volume = {50}, year = {2017}, month = {AUG}, pages = {5748-5758}, type = {Article}, abstract = {A comprehensive picture of insertion of 1,1-disubstituted difunctional olefins, their ability to double the functional group density at the same level of incorporation as that of monofunctional olefin, and copolymerization with ethylene has been demonstrated. Exposure of a palladium complex [{P boolean AND O}PdMe(L)] (P boolean AND O = kappa(2)-P,O-Ar2PC6H4SO2O with Ar = 2-MeOC6H4.; L = C2H6OS) to methyl 2-acetamidoacrylate (MAAA) revealed slight preference for 1,2-insertion over 2,1-insertion (1.0:0.7). In contrast, insertion of electron-deficient 2-(trifluoromethyl)acrylic acid (TFMAA) unveiled selective 2,1-insertion {via [(P boolean AND O)PdC5H6F3O2] (11)1. The unstable intermediate 11 undergoes beta-hydride and beta-fluoride elimination to produce subsequent insertion and elimination products. The identity of elimination products (E/Z)-2-trifluoromethyl)but-2-enoic acid [17(E/Z)] and 2-(difluoromethylene)butanoic acid (13) was fully established by 1-2D NMR spectroscopy. These insertion experiments, taken together with insertion rates, suggest that MAAA and TFMAA. are amenable to insertion. Polymerization of ethylene with MAAA, TFMAA, acetamidoacrylic acid, 2-bromoacrylic acid, dimethyl allylmalonate, and allylmalonic acid was catalyzed by [{P boolean AND O}PdMe(L)] (L = C2H3N) (S.ACN), and the highest incorporation of 11.8\% was observed for dimethyl allylmalonate (DMAM). The changes in the surface properties of the copolymers after incorporation of difunctional olefins were evaluated by measuring the water contact angle. Copolymer with highest (11.8\% of DMAM) incorporation revealed a reduced water contact angle of 76 degrees. These findings demonstrate that 1,1-disubstituted difunctional olefins are amenable to polymerization, and incorporation of difunctional olefins In polyethylene backbone leads to the production of relatively hydrophilic polyethylene copolymers.}, doi = {10.1021/acs.macromol.7b01356}, author = {Gaikwad, Shahaji R. and Deshmukh, Satej S. and Koshti, Vijay S. and Poddar, Suparna and Gonnade, Rajesh G. and Rajamohanan, Pattuparambil R. and Chikkali, Samir H.} } @article {43699, title = {Rearrangement of imine double bond in activated quinazolinones: synthesis of phaitanthrin E}, journal = {Indian Journal of Chemistry Section B-Organic Chemistry Including Medicinal Chemistry}, volume = {56}, year = {2017}, month = {MAY}, pages = {527-530}, abstract = {Wolff-Kishner reduction of tryptanthrin to indoloquinazolinone followed by lithium diisorpropylamide induced acylation of the active methylene group with methyl chloroformate directly furnishes the phaitanthrin E in very good yield. Similar acylations of indoloquinazolinone have also been performed with four different acyl chlorides. In all examples, facile rearrangement of imine double bond from quinazolinone to indole moiety to form the corresponding alpha,beta-unsaturated carbonyl system is observed.}, author = {Vaidya, Sagar D. and N. P. Argade} } @inbook {44023, title = {Recent innovations in coronary stents}, booktitle = {Emerging Applications, Perspectives, and Discoveries in Cardiovascular Research}, year = {2017}, pages = {12}, abstract = {In heart diseases, there are frequent incidents of narrowing or blocking coronary arteries by fatty plaque deposition. As a result, blood pressure rises and the arteries weaken. This can lead to rapid rupture of the blood vessels, also known as heart attack or brain stroke. In some cases the arteries lose elasticity over old age. Heart stent or coronary stent inserts in the blocked/fragile region of coronary artery. It helps to expand the artery to allow free flow of blood and consequently, reduces blood pressure. Over past 20 years there are many modifications and innovations in the field of cardiac stents, in this chapter we will discuss few of those. }, doi = {10.4018/978-1-5225-2092-4.ch013}, author = {Sengupta, Poulomi} } @article {44044, title = {Recovery of radio-cesium from actual high level liquid waste using solvents containing calix[4]arene-crown-6 ligands}, journal = {Journal of Environmental Chemical Engineering}, volume = {5}, year = {2017}, month = {AUG}, chapter = {4134-4140}, abstract = {

This paper gives two methods, viz. a solvent extraction method and a hollow fiber contactor based liquid membrane method, for the separation of radio-cesium from actual high level liquid waste (HLLW) solutions using calix[4]arene-crown-6 based solvent systems. While the solvent extraction method involved calix[4]arene-bis-benzo-crwon-6 (CBC) in PTMS (phenyltrifluoromethyl sulphone), the hollow fiber supported liquid membrane method used a polysulphone fiber containing contactor and bis-octyl-benzo-calix[4]arene-mono-crown-6 (CMC) in 40\% iso-decanol + 60\% n-dodecane. Both methods reported selective radio-cesium separation with almost no contamination from the associated fission product radionuclides. The radiolytic stability of the hollow fiber contactor was checked by keeping the contactor module in contact with the diluted HLLW for 50 days. The second run carried out after 50 days resulted in excellent reproducibility suggesting efficacy of this method for radioactive waste remediation.

}, keywords = {137Cs, Calix-crown-6, Cesium, fibers, Fission products, Hollow fiber contactor, Liquid membranes, liquids, PUREX-HLLW, Radioactive wastesSolvent extraction, solvent extraction, Solvents}, issn = {2213-3437}, doi = {10.1016/j.jece.2017.07.055}, author = {Jagasia, P. and Dhami, P. S. and Mohapatra, P. K. and Ansari, S. A. and Jadhav, S. Y. and Kalyankar, G. K. and Gandhi, P. M. and Kharul, U. K.} } @article {43795, title = {Redox-mediated 3D graphene based nanoscoop design for ultracapacitor applications}, journal = {New Journal of Chemistry}, volume = {41}, year = {2017}, month = {AUG}, pages = {8390-8398}, type = {Article}, abstract = {Contemporary energy storage devices significantly rely on the rational design of micro and nanostructural features of electrode materials for efficient ion transport. A judicious concept of utilizing the extended charge mobility on the third dimension along with an active redox couple to significantly maximize the capacitance has been demonstrated via (a) the fabrication of a 3D network from 2D graphene and (b) the introduction of an active redox species. Compared with traditional graphene systems, an unprecedented 8-fold gain of capacitance that was sustained with minimal loss even beyond 5000 cycles is achieved and is reported for the first time. This was due to the complementary advantage of both the electric double layer capacitance of the 3D graphene electrode and the redoxmediated pseudocapacitance of K3Fe(CN)(6) in alkaline electrolytes. Colloidal polystyrene spheres with a tunable size range were used as sacrificial templates for generating the 3D network. This design outperforms others, is an excellent candidate as an ultracapacitor and is envisaged to lead to new opportunities in several electrochemical applications.}, doi = {10.1039/c7nj01461a}, author = {Rani, Pallavi and Jhajharia, Suman Kumari and Selvaraj, Kaliaperumal} } @article {43668, title = {Reductive activation of O-2 by a bioinspired Fe complex for catalytic epoxidation reactions}, journal = {Chemical Communications}, volume = {53}, year = {2017}, month = {MAY}, pages = {5914-5917}, type = {Article}, abstract = {Aerobic epoxidation of olefins catalyzed by iron complexes without the use of a sacrificial coreductant is unknown. We report the reductive activation of O-2 by a bioinspired [(bTAML)Fe-III(H2O)](-) (1) complex to catalyze the epoxidation of alkenes with TONs of up to 80. Spectroscopic and kinetic evidence indicates the involvement of FeV(O) as the active oxidant during the reaction.}, doi = {10.1039/c7cc00933j}, author = {Singh, Kundan K. and Sen Gupta, Sayam} } @article {43998, title = {Removal of endrin and dieldrin isomeric pesticides through stereoselective adsorption behavior on the graphene oxide-magnetic nanoparticles}, journal = {Environmental Science and Pollution Research}, year = {2017}, month = {SEP}, pages = {1-9}, type = {Article in Press}, abstract = {

A novel stereoselective removal behavior of isomeric endrin and dieldrin pesticides from sample solution is demonstrated using nanocomposite of graphene oxide (GO) and iron oxide (Fe3O4) magnetic nanoparticles (MNPs). The removal efficiency of endrin and dieldrin was found higher when GO-MNPs was used as a separating probe than the individual use of GO and MNPs. The removal efficiency of both the pesticides was found to be more favorable when the dosage amount of GO-MNPs was 30 mg for 30-min contact time with pH 4.0 at room temperature. The good correlation of determination (R2) with 0.975 and 0.973 values obtained for endrin and dieldrin, respectively demonstrated a well fitting of Langmuir adsorption isotherm model. The higher removal percentage (86.0\%) and higher slope value of Langmuir adsorption isotherm were estimated for endrin compared to dieldrin (74.0\%). The reason for higher adsorption percentage of endrin is due to the endo-position of oxygen atom in molecule favors more interaction of molecules with GO-MNPs compared to the exo-position of oxygen present in dieldrin. In addition, the higher value of R2 for endrin and dieldrin demonstrated better suitability of pseudo-first-order and pseudo-second-order kinetic models, respectively. The advantages of the present method are use of simple UV-vis spectrophotometry for monitoring and low-cost use of GO-MNPs nanomaterial for the removal of pesticides from sample solution. {\textcopyright} 2017 Springer-Verlag GmbH Germany

}, keywords = {Dieldrin, Endrin, Isomeric Pesticides, Removal}, doi = { 10.1007/s11356-017-0159-z}, author = {Shrivas, K. and Ghosale, A. and Nirmalkar, N. and Srivastava, A and Singh, S. K. and Shinde, S. S.} } @article {44011, title = {Repurposing Ivacaftor for treatment of staphylococcus aureus infections}, journal = {International Journal of Antimicrobial Agents}, volume = {50}, year = {2017}, month = {SEP}, pages = {389-392}, type = {Journal Article}, abstract = {

Drug repurposing of non-antimicrobials is a novel method to augment a seriously depleted drug pipeline for targeting drug{\textendash}resistant pathogens. This article highlights the potent antimicrobial activity of Ivacaftor against Staphylococcus aureus, including vancomycin{\textendash} and other multidrug{\textendash}resistant strains. The potent activity of Ivacaftor in vivo is also demonstrated in a murine neutropenic thigh infection model. Taken together, these results support the potential of Ivacaftor as an antimicrobial agent for the treatment of staphylococcal infections. {\textcopyright} 2017 Elsevier B.V. and International Society of Chemotherapy

}, doi = {10.1016/j.ijantimicag.2017.03.020}, author = {Thakare, R. and Das, S. and Vasudevan, N. and Jachak, G.R. and Reddy, D.S. and Dasgupta, A. and Chopra, S.}, editor = {Singh, A. K.} } @conference {43743, title = {Resistin mediates sex-dependent effects of perivascular adipose tissue on vascular function in the shrsp}, booktitle = {20th Annual Meeting of the Scottish-Cardiovascular-Forum}, volume = {103}, year = {2017}, month = {APR}, pages = { A3-A3}, type = {Meeting Abstract }, doi = {10.1136/heartjnl-2017-311433.6}, author = {McNeilly, Sarah and Small, Heather Y. and Mary, Sheon and Sheikh, Adam and Delles, Christian} } @article {44174, title = {Resolution of the identity and cholesky representation of EOM-MP2 approximation: implementation, accuracy and efficiency}, journal = {Journal of Chemical Sciences}, volume = {129}, year = {2017}, month = {OCT}, pages = {1611-1626}, type = {Article}, abstract = {We present a Resolution of Identity and Cholesky Decomposition Based Implementation of EOM-MP2 approximation. The RI and CD based EOM-MP2 shows significant speed-up and less storage requirement than the conventional canonical version and can be applied to very large systems. The new algorithm used for this implementation eliminates the most storage requiring four-index quantities resulting in the decrease of storage requirement, reduction in I/O penalties and improved parallel performance, at the expense of more floating point operations. Therefore, the speed-up compared to conventional EOM-MP2 method is more prominent in case of EA, EE and SF case where the storage bottleneck is significant than the EOM-IP-MP2 method, where the storage requirement is significantly less. However, the RI/CD based EOM-IP-MP2 can be coupled with frozen natural orbitals to gain further speed-up.}, keywords = {CC, CD, Cholesky decomposition, EA, EE, electron attachment, electron correlation, EOM, equation-of-motion, excited state, ionization, IP, MP2, Resolution-of-identity, RI, SF, spinflip}, issn = {0974-3626}, doi = {10.1007/s12039-017-1378-z}, author = {Kumar, Dinesh and Dutta, Achintya Kumar and Manohar, Prashant Uday} } @article {43789, title = {Revealing the mystery of metabolic adaptations using a genome scale model of Leishmania infantum}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {AUG}, type = {Article}, abstract = {Human macrophage phagolysosome and sandfly midgut provide antagonistic ecological niches for Leishmania parasites to survive and proliferate. Parasites optimize their metabolism to utilize the available inadequate resources by adapting to those environments. Lately, a number of metabolomics studies have revived the interest to understand metabolic strategies utilized by the Leishmania parasite for optimal survival within its hosts. For the first time, we propose a reconstructed genome-scale metabolic model for Leishmania infantum JPCM5, the analyses of which not only captures observations reported by metabolomics studies in other Leishmania species but also divulges novel features of the L. infantum metabolome. Our results indicate that Leishmania metabolism is organized in such a way that the parasite can select appropriate alternatives to compensate for limited external substrates. A dynamic non-essential amino acid motif exists within the network that promotes a restricted redistribution of resources to yield required essential metabolites. Further, subcellular compartments regulate this metabolic re-routing by reinforcing the physiological coupling of specific reactions. This unique metabolic organization is robust against accidental errors and provides a wide array of choices for the parasite to achieve optimal survival.}, doi = {10.1038/s41598-017-10743-x}, author = {Subramanian, Abhishek and Sarkar, Ram Rup} } @article {43782, title = {Review on cellulose and lignin based binders and electrodes: Small steps towards a sustainable lithium ion battery}, journal = {International Journal of Biological Macromolecules}, volume = {103}, year = {2017}, month = {OCT}, pages = {1032-1043}, type = {Article}, abstract = {Lithium ion batteries (LIB) are the most promising energy storage systems for portable electronics and future electric or hybrid-electric vehicles. However making them safer, cost effective and environment friendly is the key challenge. In this regard, replacing petro-derived materials by introducing renewable biomass derived cellulose derivatives and lignin based materials into the battery system is a promising approach for the development of green materials for LIB. These biomaterials introduce sustainability as well as improved safety in the final disposal of LIB batteries. In this review we introduce LIB materials technology in brief and recent developments in electrodes and binders based on cellulose and their derivatives and lignin for lithium ion batteries. (C) 2017 Elsevier B.V. All rights reserved.}, doi = {10.1016/j.ijbiomac.2017.05.155}, author = {Nirmale, Trupti C. and Kale, Bharat B. and Varma, Anjani J.} } @article {45670, title = {Revisiting HOPG superlattices: structure and conductance properties}, journal = {Surface Science}, volume = { 658 }, year = {2017}, month = {APR}, pages = {55-60}, type = {Article}, abstract = {Superlattices observed on highly oriented pyrolytic graphite (HOPG) have been studied extensively by scanning tunnelling microscopy (STM). The interest in the study of graphite superlattices has seen a resurgence since the discovery of graphene. Single layer graphene, bilayer graphene, and few layer graphene can now be grown on different substrates. The adherence of graphene to various substrates often leads to a periodic out-of-plane modulation and superlattices due to lattice mismatch. In this paper, we report STM imaging and scanning tunnelling spectroscopy (STS) of different kinds of superlattices on HOPG characterized by a variation in lattice periodicities. Our study also shows evidence of the displacement of the topmost HOPG layer by scanning different areas of the same superlattice. A correlation between the lattice periodicity with its conductance properties is derived. The results of this work are important for understanding the origin of the superlattice structure on HOPG. Investigation of such superlattices may open up possible ways to modify two dimensional electron systems to create materials with tailored electronic properties.}, doi = {10.1016/j.susc.2016.12.002}, author = {Patil, Sumati and Kolekar, Sadhu and Deshpande, Aparna} } @article {43725, title = {Rigid peptide scaffold-incorporated structural analogs of the potent antidepressant peptide drug rapastinel (GLYX-13)}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {APR}, pages = {3594-3596}, type = {Article}, abstract = {

Rapastinel (GLYX-13) is a natural amidated tetrapeptide (Thr-Pro-Pro-Thr-NH2)endowed with strong antidepressant property. Rapastinel shows considerable promise for treating drug-resistant major depressive disorder (MDD), and is under clinical phase III development. Herein, we report the synthesis of a novel class of analogues of the potent antidepressant peptide drug rapastinel featuring rigid dipeptide scaffolds comprising proline (L/D) and amino thiophene carboxylates (Atc). Amino thiophene carboxylate is a conformationally constrained aromatic beta-amino acid, known to rigidify peptide backbones thereby limiting the conformational flexibility of peptides and improving proteolytic stability.

}, doi = {10.1002/slct.201700605}, author = {Nadimpally, Krishna Chaitanya and Chakrapani, Aswathi and Prabhu, Priyanka J. and Madica, Krishnaprasad and Sanjayan, Gangadhar J.} } @inbook {45801, title = {Ring-opening polymerization and metathesis polymerizations}, booktitle = {Metal-catalyzed polymerization: fundamentals to applications}, year = {2017}, pages = {137-160}, publisher = {CRC Press}, organization = {CRC Press}, chapter = {Ring-opening polymerization and metathesis polymerizations}, abstract = {Aliphatic polyesters are important industrial polymers that have applications as fibers, coatings, bulk packaging materials, and films. Their biodegradable nature makes them an environmentally friendly alternative to the nondegradable plastics. 1 Copolymers of lactide and trimethylene carbonate (TMC) are used as thermoplastic elastomers and biomaterials for applications in tissue engineering, drug delivery, as biodegradable devices for bone fracture repair and sutures. The monomer for poly(lactic acid) (PLA), d, l-lactide is a dimer of lactic acid (LA), which is produced from natural sources such as a starch or sugar via bacterial fermentation of D-glucose. 2 Hence, production of poly(lactide) is environmentally friendly. Manufacturing of PLA has become profitable over the years. Natureworks LLC, a joint venture between Cargill and Teijen Limited, set up a 300 million pounds per year PLA production plant and sells PLA under the trade name Ingeo{\texttrademark}, which is produced in isotactic form by a carbon neutral process. Its physical properties are similar to polyolefins and polystyrene. 3 The polycondensation route for PLA is undesirable since it is difficult to produce high molecular weight polymer, making ring-opening polymerization (ROP) the method of choice. In this chapter, ROP toward sustainable polymers such as PLA and poly(e-caprolactone) (PCL) only will be discussed. ROP is a living polymerization, that is, it shows fast initiation and minimal termination and transfer reactions, however it follows step-growth kinetics. Polydispersity is usually low but can be influenced by trans-esterification reactions and is of concern while making block copolymers. The thermodynamic driving force for the polymerization is 138the relief of ring strain, which helps to overcome the high entropy values (Lactide: δS = 25.0 J mol-1 K-1; ε-CL: δS = 53.9 J mol-1 K-1). 4 ROP performed using metal catalysts that operate through cationic mechanism do not yield high molecular weight polymer desirable for practical applications. Therefore immortal ROP that follows chain-transfer pathway and involves a catalyst and a nucleophile (either part of the catalyst or externally added) that acts simultaneously as the initiator and chain-transfer agent (CTA), was developed as an efficient alternative to the classical living cationic polymerization.}, isbn = {978-149876758-3}, issn = {978-149876757-6}, doi = {10.1201/b19905}, author = {Ambade, A. V.} } @article {43836, title = {Role of base fluid on the thermal conductivity of oleic acid coated magnetite nanofluids}, journal = {COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS}, volume = {529}, year = {2017}, month = {SEP}, chapter = {922-929}, abstract = {

Thermal conductivity enhancement of nanofluids of oleic acid coated magnetite nanoparticles dispersed in four different base fluids (toluene, xylene, mesitylene, kerosene) is studied to understand the role of the solvent (base fluid). From the correlation of the thermophysical properties of the base fluid with the thermal conductivity of the corresponding nanofluid, it is found that the nanofluid with the base fluid of lower intrinsic thermal conductivity and dielectric constant shows relatively larger enhancement in the thermal conductivity. A linear increase in the thermal conductivity with increasing viscosity is observed for all four nanofluids studied. The concentration dependent thermal conductivity studies showed enhancement only above a particular concentration, within the sensitivity of the measurement, and this critical concentration is different for the different nanofluids. The nanofluid with kerosene showed the lowest critical concentration for thermal conductivity enhancement compared to the other nanofluids. The difference between the experimental thermal conductivity and the calculated value using the Maxwell model is found to depend on the critical concentration. By assuming the critical concentration as the zero concentration, it is found that all the studied nanofluids almost follow the Maxwell model of thermal conductivity. Thus, for the dispersions of the same oleic acid coated magnetite nanoparticles, the base fluid affects the critical concentration for thermal conductivity enhancement, probably due to the interfacial effects arising from the surfactant-solvent interactions.

}, keywords = {Brownian-Motion, Enhancement, Heat-transfer Characteristics, Magnetic nanofluids, Maxwell model, Nanoparticles, Particle Migration, Size, stability, Suspension, Temprature, Thermal conductivity, Thermophysical properties, transport mechanism, viscosity}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2017.06.084}, author = {Lenin, Ramanujam and Joy, Pattayil Alias} } @article {44132, title = { Role of localized graphitization on the electrical and magnetic properties of activated carbon}, journal = {Journal of the American Ceramic Society}, volume = {100}, year = {2017}, month = {NOV}, pages = {5151-5161}, type = {Article}, abstract = {The correlation between the magnetic and electrical properties of activated carbon with its microstructure is studied. The changes in the microstructure of activated carbon, after activation at three different temperatures (800 degrees C, 900 degrees C, 1000 degrees C) using different amounts of the activating agent, KOH (KOH/C ratio of 1: 1, 2: 1, 3: 1 and 4: 1), are studied using X-ray diffraction and Raman spectroscopy. The results showed the formation of localized nanographitic domains, along with the changes in the surface area and porosity of the activated carbon. The changes in the microstructure are found to be directly correlated with the magnetic properties and electrical conductivity. The interplay between ordering and disordering parameters in the activated carbon is found to determine the electrical conductivity and magnetic properties.}, doi = {10.1111/jace.15035}, author = {Raj, Kovummal Govind and Joy, Pattayil Alias} } @article {45685, title = {Role of spatial inhomogenity in GPCR dimerisation predicted by receptor association-diffusion models}, journal = {Physical Biology}, volume = {14 }, year = {2017}, month = {JUN}, pages = {036002}, type = {Article}, abstract = {G protein-coupled receptor (GPCR) association is an emerging paradigm with far reaching implications in the regulation of signalling pathways and therapeutic interventions. Recent super resolution microscopy studies have revealed that receptor dimer steady state exhibits sub-second dynamics. In particular the GPCRs, muscarinic acetylcholine receptor M-1 (M1MR) and formyl peptide receptor (FPR), have been demonstrated to exhibit a fast association/dissociation kinetics, independent of ligand binding. In this work, we have developed a spatial kinetic Monte Carlo model to investigate receptor homo-dimerisation at a single receptor resolution. Experimentally measured association/dissociation kinetic parameters and diffusion coefficients were used as inputs to the model. To test the effect of membrane spatial heterogeneity on the simulated steady state, simulations were compared to experimental statistics of dimerisation. In the simplest case the receptors are assumed to be diffusing in a spatially homogeneous environment, while spatial heterogeneity is modelled to result from crowding, membrane micro-domains and cytoskeletal compartmentalisation or {\textquoteright}corrals{\textquoteright}. We show that a simple association-diffusion model is sufficient to reproduce M1MR association statistics, but fails to reproduce FPR statistics despite comparable kinetic constants. A parameter sensitivity analysis is required to reproduce the association statistics of FPR. The model reveals the complex interplay between cytoskeletal components and their influence on receptor association kinetics within the features of the membrane landscape. These results constitute an important step towards understanding the factors modulating GPCR organisation.}, doi = {10.1088/1478-3975/aa6b68}, author = {Deshpande, Sneha A. and Pawar, Aiswarya B. and Dighe, Anish and Athale, Chaitanya A. and Sengupta, Durba} } @article {44109, title = { Role of the pair correlation function in the dynamical transition predicted by mode coupling theory}, journal = {Physical Review Letters}, volume = {119}, year = {2017}, month = {DEC}, type = {Article}, abstract = {In a recent study, we have found that for a large number of systems the configurational entropy at the pair level S-c2, which is primarily determined by the pair correlation function, vanishes at the dynamical transition temperature T-c. Thus, it appears that the information of the transition temperature is embedded in the structure of the liquid. In order to investigate this, we describe the dynamics of the system at the mean field level and, using the concepts of the dynamical density functional theory, show that the dynamical transition temperature depends only on the pair correlation function. Thus, this theory is similar in spirit to the microscopic mode coupling theory (MCT). However, unlike microscopic MCT, which predicts a very high transition temperature, the present theory predicts a transition temperature that is similar to T-c. This implies that the information of the dynamical transition temperature is embedded in the pair correlation function.}, doi = {10.1103/PhysRevLett.119.265502}, author = {Nandi, Manoj Kumar and Banerjee, Atreyee and Dasgupta, Chandan and Bhattacharyya, Sarika Maitra} } @article {43787, title = {Room-temperature direct arylation of anilides under external oxidant-free conditions using CO2-Derived Dimethyl Carbonate (DMC) as a {\textquoteright}green{\textquoteright} solvent}, journal = {Chemistryselect}, volume = {2}, year = {2017}, month = {AUG}, pages = {7565-7569}, type = {Article}, abstract = {

Here, an efficient catalytic protocol for direct C-H bond arylation of anilides under base- and external oxidant-free conditions is reported. This reaction proceeds readily at room temperature using CO2-derived dimethyl carbonate (DMC) as a green solvent under visible-light dual catalysis. Later, application of our strategy for the gram-scale synthesis of Boscalid has been successfully shown. An unprecedented unsymmetrical bis-arylation of anilides is also demonstrated under mild, redox-neutral conditions.

}, doi = {10.1002/slct.201701108}, author = {Sahoo, Manoj K. and Rana, Jagannath and Subaramanian, Murugan and Balaraman, Ekambaram} } @article {45690, title = {Route to benzimidazol-2-ones via decarbonylative ring contraction of quinoxalinediones: application to the synthesis of flibanserin, A drug for treating hypoactive sexual desire disorder in women and marine natural product hunanamycin analogue}, journal = {ACS Omega}, volume = { 2 }, year = {2017}, month = {AUG}, pages = {5137-5141}, type = {Article}, abstract = {

A simple and practical method to access a variety of benzimidazol-2-ones is reported here. A series of N-alkylsubstituted benzimidazol-2-ones were synthesized by decarbonylative ring contraction starting from corresponding quinoxalinediones for the first time. The utility of the method has been demonstrated by synthesizing recently approved controversial drug flibanserin (Addyi) and a urea analogue of marine antibiotic natural product hunanamycin-A.

}, doi = {10.1021/acsomega.7b00819}, author = {Shingare, Rahul D. and Kulkarni, Akshay S. and Sutar, Revannath L. and Reddy, D. Srinivasa} } @article {45708, title = {(R-X-R)(4)-Motif peptides containing conformationally constrained cyclohexane-derived spacers: effect on cellular uptake}, journal = {ChemMedChem}, volume = {12}, year = {2017}, month = {NOV }, pages = {1743-1747}, type = {Article}, abstract = {

Arginine-rich peptides having the (R-X-R) n motif are among the most effective cell-penetrating peptides (CPPs). Herein we report a several-fold increase in the efficacy of such CPPs if the linear flexible spacer (-X-) in the (R-X-R) motif is replaced by constrained cyclic 1,4-substituted-cyclohexane-derived spacers. Internalization of these oligomers in mammalian cell lines was found to be an energy-dependent process. Incorporation of these constrained, non-proteinogenic amino acid spacers in the CPPs is shown to enhance their proteolytic stability.

}, keywords = {(R-X-R)-motif, cell-penetrating peptides, cellular uptake, protease stability}, issn = {1860-7179}, doi = {10.1002/cmdc.201700498}, author = {Bhosle, Govind S. and Fernandes, Moneesha} } @article {45436, title = { Rational design of coumarin derivatives as antituberculosis agents}, journal = {Future Medicinal Chemistry}, volume = {10}, year = {2018}, month = {OCT}, pages = {2431-2444}, type = {Article}, abstract = {A series of coumarin derivatives was designed as potential antituberculosis agents. Results: The compounds were screened against active and dormant Mycobacterium tuberculosis (Mtb). Compounds 3k and 3n were found to have the most promising activity against replicating MtbH37Rv exhibiting minimum inhibitory concentration of 4.63 and 9.75 mu M respectively. The compounds were also effective against dormant MtbH37Rv exhibiting more potency than the standard drugs, isoniazid and rifampicin. The compounds were found to be non-cytotoxic against human cell lines. Conclusion: This study provides promising antituberculosis agents that are effective against replicating as well as dormant Mtb and can thus act as potential leads for further development. }, issn = {1756-8919}, doi = {10.4155/fmc-2018-0015}, author = {Mali, Hemlata M. and Sabale, Sandip S. and Degani, Mariam S. and Borkute, Rachana and Choudhari, Amit S. and Sarkar, Dhiman and Krishna, Vagolu Siva and Sriram, Dharmarajan} } @article {44373, title = {Rationally designed self-standing V2O5 electrode for high voltage non-aqueous all-solid-state symmetric (2.0 V) and asymmetric (2.8 V) supercapacitors}, journal = {Nanoscale}, volume = {10}, year = {2018}, month = {MAY}, pages = {8741-8751}, abstract = {The maximum capacitive potential window of certain pseudocapacitive materials cannot be accessed in aqueous electrolytes owing to the low dissociation potential of 1.2 V possessed by water molecules. However, the inferior pseudocapacitance exhibited by the commonly used electrode materials when integrated with non-aqueous electrolytes still remains a challenge in the development of supercapacitors (SC). Proper selection of materials for the electrode and a rational design process are indeed important to overcome these practical intricacies so that such systems can perform well with non-aqueous electrolytes. We address this challenge by fabricating a prototype all-solid-state device designed with high-capacitive V2O5 as the electrode material along with a Li-ion conducting organic electrolyte. V2O5 is synthesized on a pre-treated carbon-fibre paper by adopting an electrochemical deposition technique that effects an improved contact resistance. A judicious electrode preparation strategy makes it possible to overcome the constraints of the low ionic and electrical conductivities imposed by the electrolyte and electrode material, respectively. The device, assembled in a symmetrical fashion, achieves a high specific capacitance of 406 F g(-1) (at 1 A g(-1)). The profitable aspect of using an organic electrolyte is also demonstrated with an asymmetric configuration by using activated carbon as the positive and V2O5 as the negative electrode materials, respectively. The asymmetric device displays a wide working-voltage window of 2.8 V and delivers a high energy density of 102.68 W h kg(-1) at a power density of 1.49 kW kg(-1). Moreover, the low equivalent series resistance of 9.9 Omega and negligible charge transfer resistance are observed in the impedance spectra, which is a key factor that accounts for such an exemplary performance.}, doi = {10.1039/c8nr00805a}, author = {Ghosh, Meena and Vijayakumar, Vidyanand and Soni, Roby and Kurungot, Sreekumar} } @article {44239, title = {Reaction engineering for continuous production of silver nanoparticles}, journal = {Chemical Engineering \& Technology}, volume = {41}, year = {2018}, month = {JAN}, pages = {157-167}, type = {Article}, abstract = {

A scalable process for the production of silver nanoparticles that allows for complete conversion of the limiting reactant is analyzed in detail. The kinetics of silver nanoparticle synthesis using citrate reduction are investigated and used for development of a reaction engineering model to facilitate the reactor design. The effect of temperature, pH, concentration and mixing (axial dispersion) on the rates of nucleation and growth are analyzed quantitatively. An approach that considers reaction kinetics coupled with quality of dispersion is developed for reactor design as well as selection of reactor configurations for the synthesis of specific particle sizes. The developed approach has been applied for continuous production of 10-L suspension silver nanoparticles with very narrow particle size distribution.

}, keywords = {kinetics, particle size distribution, rate constant, Reactor design, Silver nanoparticle production}, issn = {0930-7516}, doi = {10.1002/ceat.201700035}, author = {Deshpande, Javdeep B. and Kulkarni, Amol A.} } @article {44218, title = {Realizing high capacitance and rate capability in polyaniline by enhancing the electrochemical surface area through induction of superhydrophilicity}, journal = {ACS Applied Materials \& Interfaces}, volume = {10}, year = {2018}, month = {JAN}, pages = {676-686}, type = {Article}, abstract = {

Polyaniline (PANI) as a pseudocapacitive material has very high theoretical capacitance of 2000 F g(-1). However, its practical capacitance has been limited by low electrochemical surface area (ESA) and unfavorable wettability toward aqueous electrolytes. This work deals with a strategy wherein the high ESA of PANI has been achieved by the induction of superhydrophilicity together with the alignment of PANI exclusively on the surface of carbon fibers as a thin layer to form a hybrid assembly. Superhydrophilicity is induced by electrochemical functionalization of the Toray carbon paper, which further induces superhydrophilicity to the electrodeposited PANI layer on the paper, thereby ensuring a high electrode-electrolyte interface. The Toray paper is electrochemically functionalized by the anodization method, which generates a highly active electrochemical surface as well as greater wettability (superhydrophilic) of the carbon fibers. Because of the strong interaction of anilinium chloride with the hydrophilic carbon surface, PANI is polymerized exclusively over the surface of the fibers without any appreciable aggregation or agglomeration of the polymer. The PANI-Toray paper assembly in the solid-state prototype supercapacitor can provide a high gravimetric capacitance of 1335 F g(-1) as well as a high areal capacitance of 1.3 F cm(-2) at a current density of 10 A g(-1). The device also exhibits high rate capability, delivering 1217 F g(-1) at a current density of 50 A g(-1) and a high energy density of 30 W h kg(-1) at a power density of 2 kW kg(-1).

}, keywords = {electrochemical active sulfate area, electrochemical functionalization, electropolymerization, polyaniline, supercapacitor, superhydrophilic}, issn = {1944-8244}, doi = {10.1021/acsami.7b15534}, author = {Soni, Roby and Kashyap, Varchaswal and Nagaraju, Divya and Kurungot, Sreekumar} } @article {45547, title = {Real-Time monitoring of biopharmaceutical crystallization: chord length distribution to crystal size distribution for lysozyme, rHu insulin, and vitamin B12}, journal = {Industrial and Engineering Chemistry Research}, year = {2018}, month = {DEC}, type = {Article}, abstract = {This investigation is focused on designing an effective strategy for the real-time monitoring of biopharmaceutical crystallization using focused beam reflectance measurement (FBRM). Lysozyme, rHu insulin, and vitamin B12 were selected as model biopharmaceutical molecules for the study. Under selected experimental conditions, lysozyme exhibits polymorphism with tetragonal and needle-shaped crystals, rHu insulin forms rhombohedral crystals, and vitamin B12 forms polyhedral-shaped crystals. Focused beam reflectance measurements were performed to obtain the real time chord length distribution (CLD) of crystals obtained using static and dynamic conditions. Mathematical models were developed for converting CLD data obtained using FBRM measurements into the useful crystal size distribution (CSD) data for low (tetragonal, rhombohedral and polyhedral) and high aspect ratio crystals (needle). For high-aspect-ratio crystals, both width-based and length-based models were developed for capturing the CSD. The model validation was performed by comparing the model CSD with the CSD obtained using microscopic image analysis. Developed models effectively capture the CSD for variable shape crystals of lysozyme, rHu insulin, and vitamin B12. It was demonstrated that in the case of high-aspect-ratio crystals, there is an intrinsic limitation in using FBRM for length-based crystal size measurement.}, doi = {10.1021/acs.iecr.8b04613}, author = {Pandit, A. and Katkar, V. and Ranade, V. and Bhambure, R.} } @article {44555, title = {Recent advances in molecular rearrangements involving aryne intermediates}, journal = {Chemical Communications}, volume = {54}, year = {2018}, month = {MAR}, pages = {2580-2594}, abstract = {

This Feature Article is aimed at highlighting the recent developments in the transition-metal-free molecular rearrangements involving arynes. The chemistry of arynes has shown incredible developments especially in transition-metal-free carbon-carbon and carbon-heteroatom bond-forming reactions in the last three decades. The rapid growth in this field is mainly due to the development of mild methods for the generation of arynes. One aspect of the recent developments in the chemistry of arynes involves the molecular rearrangements proceeding via this electrophilic intermediate. The molecular rearrangements have provided direct access to a library of valuable molecules, which cannot be accessed in a single step through other synthetic routes. Herein, we present a concise account on the developments that occurred in this field over the last three decades.

}, issn = {1359-7345}, doi = {10.1039/c7cc09122b}, author = {Roy, Tony and Biju, Akkattu T.} } @article {45463, title = {Recent advances in the organocatalytic enantioselective synthesis of functionalized -lactones}, journal = {Chemistry-An Asian Journal}, volume = {13 }, year = {2018}, month = {SEP}, pages = {2333-2349 }, type = {Article}, abstract = {

This Focus Review highlights recent developments in the organocatalytic enantioselective synthesis of -lactone derivatives. Owing to the importance of -lactones as a heterocyclic motif that is present in a variety of natural products and biologically active molecules, several catalytic methods have been developed for the synthesis of these compounds in their enantiomerically pure form. Organocatalytic methods that employ N-heterocyclic carbenes (NHCs), cinchona alkaloids, isothioureas, 4-dimethylaminopyridine (DMAP) derivatives, and phosphines have allowed the highly enantioselective synthesis of -lactones from cheap and readily available starting materials. Moreover, the inherent strain in the four-membered ring of -lactones has also been utilized in further synthetic transformations, thus making -lactones a versatile intermediate in organic synthesis.

}, doi = {10.1002/asia.201800902}, author = {Mukherjee, Subrata and Biju, Akkattu T.} } @article {45608, title = {Recent methods for the synthesis of α-acyloxy ketones }, journal = {Organic and biomolecular chemistry}, volume = {16}, year = {2018}, month = {DEC}, pages = {9334-9348 }, type = {Article }, abstract = {The present review provides a broad description of the methods reported for the synthesis of α-acyloxy ketones and some of their derivatives. α-Acyloxy ketones and their derivatives are vital synthetic intermediates and are ubiquitous as biochemical constituents of living organisms, biologically active natural products and pharmaceuticals. Due to their biological importance, new methods for their synthesis are being continuously developed and documented in the recent past. However, the chemical literature lacks a comprehensive summary on the synthetic methodologies targeting α-acyloxy ketones. In an attempt to fill this void, this review discusses their synthetic procedures developed over time. The synthetic approaches are systematically classified based on the substrates used. The mechanistic details for certain critical cases are also discussed. In the past, preparation of α-acyloxy ketones was reported from functionalized ketones like α-haloketones and diazo esters. Later on, among the reactions that formed the acyloxy ketones, oxidative coupling of ketones with carboxylic acids both under metal and metal-free conditions made their synthesis simple and versatile. Specifically, in the last decade, many oxidative coupling reactions emerged as a powerful tool for the synthesis of α-acyloxy ketones. Quite recently, acyloxy ketones{\textquoteright} synthesis has been reported from commercially available alkenes and alkynes through oxidative addition reactions. Subsequently, the mechanistic details for these coupling reactions became interesting to many organic chemists. The asymmetric version of the title compounds hails from their enzymatic resolution to metal catalysed chiral synthesis. Besides, the synthesis of acyloxy ketones from epoxides, alcohols and enamides using various oxidative reagents has also been documented.}, doi = { 10.1039/C8OB02881H}, author = {Prasad, P. K. and Reddi, R. N. and Arumugam, S.} } @article {45592, title = {Recursive orthogonal least squares based adaptive control of a polymerisation reactor}, journal = {Indian Chemical Engineer}, year = {2018}, month = {NOV}, type = {Article}, abstract = {A Nonlinear Internal Model Control (NIMC) scheme, based on a recursively updated Radial Basis Function Network (RBFN), is applied to control the nonlinear Polymerisation process. Recursive Orthogonal Least Squares (ROLS) algorithm recursively updates the weighting matrix of RBFN in real time, such that modelling errors are minimised. In addition to the ROLS based adaptive IMC, a non-adaptive IMC, based on the fixed Orthogonal Least Squares (OLS) algorithm and a normal PID controller are also applied to control the polymerisation process. The simulated results show the effectiveness of the ROLS based controller in terms of response time to step changes and disturbance rejection capabilities over the classical PID controller and the fixed OLS based IMC. Also, the proposed algorithm fits well in the IMC framework}, doi = {10.1080/00194506.2018.1545605}, author = {Tiwari, S. and Sawant, P. and Rahman, I.} } @article {45407, title = { Refractive index and vapor-liquid equilibrium data for the binary systems of anisole with xylene isomers at 93.13 kPa}, journal = {Journal of Chemical and Engineering Data}, volume = {63}, year = {2018}, month = {SEP}, pages = {3475-3481}, type = {Article}, abstract = {Phase equilibrium behavior of binary systems of anisole with xylene isomers was analyzed experimentally. An apparatus which establishes equilibrium conditions through continuous circulation of equilibrium vapor condensate and equilibrium liquid was used. Experimental data comprising refractive indices of binary mixtures, equilibrium compositions of vapor and liquid, and equilibrium temperature are reported for all binary systems. Thermodynamic consistency of vapor-liquid equilibrium data was established for using the Herington, Van Ness and absolute mean deviation tests. Interaction parameters of activity coefficient models, Wilson, nonrandom two liquid, and universal quasichemical, which are important for accounting nonideal behavior in process modeling, are also estimated through regression of the respective binary VLE data. Although VLE data shows that binary systems are nonazeotropic in nature, a pinch in the T-x,y plot indicates that separation of all binary system using distillation may need a significant number of stages.}, doi = {10.1021/acs.jced.8b00348}, author = {Yadav, Satyajeet S. and Mali, Nilesh A. and Joshi, Sunil S.} } @article {44556, title = {Regioselective and efficient enzymatic synthesis of antimicrobial andrographolide derivatives}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {28}, year = {2018}, month = {APR }, pages = {1132-1137}, abstract = {

Labdane diterpene andrographolide (1) is a major constituent of Andrographis paniculata and known to exhibit wide spectrum of biological activities. In this study, regioselective monoesters of (1) have been synthesized by using Amano lipase AK (Pseudomonas fluorescens) as a biocatalyst. Amano lipase AK was able to execute highly efficient esterification of hydroxyl group attached to C-14 carbon of (1) in presence of acyl donors. Among the various synthesized derivatives including two novel compounds such as andrographolide-14-propionate (3) and andrographolide-14-caproate (5) displayed antimicrobial activity against Staphylococcus aureus with low minimal inhibitory concentration (MIC) 4 mu g/mL and 16 mu g/mL respectively. Furthermore, they have shown low hemolysis activity at their respective MIC and increase in the permeability of the bacterial cell membrane as delineated by FITC uptake and SEM imaging studies. (C) 2018 Elsevier Ltd. All rights reserved.

}, keywords = {Acylation, Andrographolide, Antimicrobial activity, biocatalysis, Hemolysis, Lipase, Natural product}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2018.01.007}, author = {Patil, Harshal S. and Jadhav, Dipesh D. and Paul, Ajay and Mulani, Fayaj A. and Karegaonkar, Shrikant J. and Thulasiram, Hirekodathakallu V.} } @article {45426, title = { Regioselective and stereoselective reductive aziridinium ring cleavage leading to azabicyclodecane architecture: enantioselective synthesis of (+)-subincanadine F}, journal = {Journal of Organic Chemistry}, volume = {83}, year = {2018}, month = {OCT}, pages = {12164-12170}, type = {Article}, abstract = {Enantioselective synthesis of cytotoxic indole alkaloid (+)-subincanadine F was accomplished starting from the corresponding (S)-acetoxysuccinimide via aziridinium ring formation and its reductive ring expansion route. Regioselective and stereoselective reductive aziridinium carbon-nitrogen bond cleavage comprising ring expansions was a key step. The (S)-OMOM protection of the hydroxyl moiety adjacent to a benzylic carbon of an in situ formed aziridinium system was necessary for lithium borohydride-induced reductive ring expansions, and it also served as a latent source of an essential ketone carbonyl group for the generation of an alpha,beta-conjugated system.}, issn = { 0022-3263}, doi = {10.1021/acs.joc.8b02113}, author = {Kalshetti, Manojkumar G. and Argade, Narshinha P.} } @article {45376, title = {Removable functional group strategy for regiodivergent Wittig rearrangement products}, journal = {Organic \& Biomolecular Chemistry }, volume = {16}, year = {2018}, month = {DEC}, pages = {8922-8926}, type = {Article}, abstract = {1,2] and [2,3] Wittig rearrangements are competing reaction pathways, often leading to uncontrollable product distribution. We employ a single removable functional group to fulfill the dual role of attaining a reversible [2,3] and stabilizing radical intermediate for the [1,2] path to obtain both the Wittig products selectively for a broad range of substrates.}, issn = {1477-0520}, doi = {10.1039/c8ob02221f}, author = {Alam, Md Nirshad and Lakshmi, K. M. and Maity, Pradip} } @article {44643, title = {Repeated photoporation with graphene quantum dots enables homogeneous labeling of live cells with extrinsic markers for fluorescence microscopy}, journal = {Light-Science \& Applications}, volume = {7}, year = {2018}, month = {AUG}, pages = {47}, abstract = {

In the replacement of genetic probes, there is increasing interest in labeling living cells with high-quality extrinsic labels, which avoid over-expression artifacts and are available in a wide spectral range. This calls for a broadly applicable technology that can deliver such labels unambiguously to the cytosol of living cells. Here, we demonstrate that nanoparticle-sensitized photoporation can be used to this end as an emerging intracellular delivery technique. We replace the traditionally used gold nanoparticles with graphene nanoparticles as photothermal sensitizers to permeabilize the cell membrane upon laser irradiation. We demonstrate that the enhanced thermal stability of graphene quantum dots allows the formation of multiple vapor nanobubbles upon irradiation with short laser pulses, allowing the delivery of a variety of extrinsic cell labels efficiently and homogeneously into live cells. We demonstrate high-quality time-lapse imaging with confocal, total internal reflection fluorescence (TIRF), and Airyscan super-resolution microscopy. As the entire procedure is readily compatible with fluorescence (super resolution) microscopy, photoporation with graphene quantum dots has the potential to become the long-awaited generic platform for controlled intracellular delivery of fluorescent labels for live-cell imaging.

}, issn = {2047-7538}, doi = {10.1038/s41377-018-0048-3}, author = {Liu, Jing and Xiong, Ranhua and Brans, Toon and Lippens, Saskia and Parthoens, Eef and Zanacchi, Francesca Cella and Magrassi, Raffaella and Singh, Santosh K. and Kurungot, Sreekumar and Szunerits, Sabine and Bove, Hannelore and Ameloot, Marcel and Fraire, Juan C. and Teirlinck, Eline and Samal, Sangram Keshari and De Rycke, Riet and Houthaeve, Gaelle and De Smedt, Stefaan C. and Boukherroub, Rabah and Braeckmans, Kevin} } @article {44559, title = {Retention of anticancer activity of curcumin after conjugation with fluorescent gold quantum clusters: an in vitro and in vivo xenograft study}, journal = {ACS Omega}, year = {2018}, month = {MAY}, abstract = {Gold nanoparticles (Au NPs) have been thoroughly investigated for anti-cancer therapy. However, their undesired high gold content remains a problem when injected into the body for drug delivery applications. In this report, we made an effort to conjugate the curcumin molecules on the surface of gold quantum clusters (Au QCs) by a novel in situ synthesis method which provides an alternative route to not only reduce the metallic content but also increase the water solubility of curcumin and the loading efficiency. Here, curcumin itself acts as a reducing and capping agent for the synthesis of Au QCs. The UV-vis absorption, fluorescence, transmission electron microscopy, and electrospray ionization mass spectrometry results confirmed the synthesis of fluorescent Au QCs. Curcumin-conjugated Au NPs (C-Au NPs) and glutathione (GSH)-conjugated Au QCs (GSH-Au QCs) were also synthesized to visualize the effect of particle size and the capping agent, respectively, on the cytotoxicity to normal and cancer cells. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay showed that the curcumin-conjugated Au QCs (C-Au QCs) were less cytotoxic to normal cells while almost the same cytotoxic to cancer cells in comparison to curcumin itself, which indicates that curcumin preserves its anticancer property even after binding to the Au QCs. However, C-Au NPs and GSH-Au QCs did not show any cytotoxicity against the normal and cancer cells at the concentration used. The western blot assay indicated that C-Au QCs promote apoptosis in cancer cells. Further, the in vivo study on severe combined immunodeficiency mice showed that C-Au QCs also inhibited the tumor growth efficiently without showing significant toxicity to internal organs.}, doi = {10.1021/acsomega.8b00113}, author = {Khandelwal, Puneet and Alam, Aftab and Choksi, Arpankumar and Chattopadhyay, Samit and Poddar, Pankaj} } @article {44560, title = {Revealing optoelectronic and transport properties of potential perovskites Cs2PdX6 (X = Cl, Br): A probe from density functional theory (DFT)}, journal = {Solar Energy}, volume = {162}, year = {2018}, month = {MAR }, pages = {336-343}, abstract = {

Metal-halide perovskites are rapidly emerging crystalline materials that are reasonably preferred as leading aspirant for applications in optoelectronic and thermoelectric devices. In this paper, we have thoroughly reviewed and performed calculations to reveal optoelectronic and transport properties for a potential newcomer, Cs2PdX6 (X = Cl, Br) termed as Cesium Palladium Halides (CPH). Outcome of present computations are compared with available results and a reasonable agreement is recorded. Energy band gap computations performed reveal indirect band gap of 2.29 eV for Cs2PdC16, which substantially reduces to 1.22 eV when {\textquoteleft}Cl{\textquoteright} is replaced by {\textquoteleft}Br{\textquoteright}. Optical absorption spectra investigations performed here, in the energy range from 3 to 5 eV confirms effective utilization of these compounds in solar cells and other optoelectronic applications. In addition, the transport properties computations performed using semi-classical Boltzmann theory, shows constant pattern of thereto power near ambient temperature range (200-500 K), which admits possible utilization of these compounds as low temperature thermoelectric materials. Performed ZT calculations demonstrates reasonably good thermoelectric performance for both materials, as there exist minor variation (0.1) in the values over wide temperature ranges i.e. from 100 to 800 K. Further, detailed analysis of transport properties predicts p-type semiconducting nature of the present series of materials.

}, keywords = {Ab-initio studies, Density functional theory, Optical properties, Transport properties}, issn = {0038-092X}, doi = {10.1016/j.solener.2018.01.059}, author = {Bhamu, K. C. and Soni, Amit and Sahariya, Jagrati} } @article {44562, title = {Reversible phase transformation phenomenon in titanium dioxide films: evidence beyond interface-nucleation and dissolution-precipitation kinetics}, journal = {Acta Materialia}, volume = {146}, year = {2018}, month = {MAR}, pages = {253-264}, abstract = {

The re-crystallization kinetics and rutile to anatase reversible phase transformation (PT) in nano crystalline titanium dioxide (TiO2) are reported. Initially, an amorphous TiO2 film is used for the present study and in situ isothermal annealing dependent nucleation and growth kinetics of anatase and rutile phase is studied at low temperature (similar to 523 K) and well explained using Johnson Mehl AvramiKolmogorov (JMAK) model. The anatase nanocrystallite (NCs) transformation into rutile phase is reported with isothermal annealing for longer time and temperature dependent annealing in lower temperature range 523 K-673 K and explained using interface-nucleation mechanism. Furthermore, the thermodynamic stability of rutile NCs and lattice stress-induced reversible PT in nano-sized rutile TiO2 are confirmed in moderate temperature range (623 K- 973 K) and well explained using x-ray diffraction, micro-Raman spectroscopy and near edge x-ray absorption fine structure spectroscopy studies. However, annealing at higher temperature (1123 K- 1323 K) induces the growth of anatase NCs and their natural transform into rutile phase are explained by well-known dissolution precipitation mechanism. Activation energy of rutile PT is quantified and found higher for dissolution-precipitation mechanism than that for interface nucleation at earlier stage. Thus, overall PT kinetics at different temperature range is well understood by invoking in three step mechanism: 1) early stage anatase-to-rutile transformation is dominated by interface-nucleation, II) then intermediate stage reversible rutile-to-anatase PT and, Ill) at later stages, anatase-to-rutile PT is controlled by dissolution precipitation mechanism. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

}, keywords = {Dissolution-precipitation kinetics, Interface-nucleation mechanism, Johnson-Mehl-Avrami-Kolmogorov (JMAK) approach, Reversible phase transformation}, issn = {1359-6454}, doi = {10.1016/j.actamat.2017.12.050}, author = {Gautam, Subodh K. and Singh, Jitendra and Shukla, D. K. and Pippel, E. and Poddar, P. and Singh, Fouran} } @article {44563, title = {Revisiting amino acids and peptides as anti-glycation agents}, journal = {Medchemcomm}, volume = {9}, year = {2018}, month = {APR}, pages = {614-624}, abstract = {

The importance of controlling or preventing protein glycation cannot be overstated and is of prime importance in the treatment of diabetes and associated complications including Alzheimer{\textquoteright}s disease, cataracts, atherosclerosis, kidney aliments among others. In this respect, simple molecules such as amino acids and peptides hold much promise both in terms of ease and scale-up of synthesis as well as in relation to negligible/low associated toxicity. In view of this, a comprehensive account of literature reports is presented, that documents the anti-glycation activity of natural and non-natural amino acids and peptides. This review also discusses the chemical reactions involved in glycation and the formation of advanced glycation end-products (AGEs) and possible/probable intervention sites and mechanism of action of the reported amino acids/peptides. This aspect of amino acids/peptides adds to their growing importance in medicinal and therapeutic applications.

}, issn = {2040-2503}, doi = {10.1039/c7md00514h}, author = {Chilukuri, H. and Kulkarni, Mahesh J. and Fernandes, M.} } @article {44588, title = {Role of oxygen vacancies and interstitials on structural phase transition, grain growth, and optical properties of Ga doped TiO2}, journal = {Journal of Applied Physics}, volume = {123}, year = {2018}, month = {JUN}, pages = {Article Number: 245702}, abstract = {A systematic study on the effect of gallium (Ga) doping (0 <= x <= 0.10) on the structural phase transition and grain growth of TiO2 is reported here. X-ray diffraction spectroscopy and Raman spectroscopy confirm that Ga doping inhibits the phase transition. Activation energy increases from 125 kJ/mol (x = 0.00) to 300 kJ/mol (x = 0.10) upon Ga incorporation. X-ray photoelectron spectroscopy shows the presence of Ti3+/Ga3+ interstitials, substitution (Ti4+ by Ga3+), and oxygen vacancies in the samples. At lower doping (x <= 0.05), interstitials play a more significant role over substitution and oxygen vacancies, thereby resulting in a considerable lattice expansion. At higher doping (x >= 0.05), the effect of interstitials is compensated by both the effect of substitution and oxygen vacancies, thereby resulting in relatively lesser lattice expansion. Inhibition of the phase transition is the result of this lattice expansion. The crystallite size (anatase) and particle size (rutile) both are reduced due to Ga incorporation. It also modifies optical properties of pure TiO2 by increasing the bandgap (from 3.06 to 3.09 eV) and decreasing the Urbach energy (from 58.59 to 47.25 meV). This happens due to regularization of the lattice by the combined effect of substitution/ interstitials and oxygen vacancies. Published by AIP Publishing.}, doi = {10.1063/1.5027672}, author = {Khatun, Nasima and Tiwari, Saurabh and Vinod, C. P. and Tseng, Chuan-Ming and Liu, Shun Wei and Biring, Sajal and Sen, Somaditya} } @article {44565, title = {Role of palladium crystallite size on CO oxidation over CeZrO 4-δ supported Pd catalysts}, journal = {Journal of Molecular Catalysis }, volume = {455}, year = {2018}, month = {AUG}, abstract = {Photodeposited palladium on nanocrystalline CeZrO 4-δ support was evaluated for CO oxidation, as a function of particle size and pre-treatment. All the catalysts were well characterized by XRD, SEM, EDX, TEM, CO chemi-sorption and Raman spectroscopy. It was observed that change in photodeposition time alters the average crystallite size of Pd, and the same was confirmed by CO chemisorption. 7 nm average crystallite size of Pd exhibited excellent catalytic activity for CO oxidation. In order to understand the effect of support and metal-support interaction, 1 wt\% Pd was deposited deliberately onto reduced and oxidized CeZrO 4-δ support. The reduced support with anionic vacancies and more Ce 3+ species exhibited an improvement in CO oxidation at onset temperature. Detailed analysis shows that Pd-deposition occurs preferentially at oxygen-vacancy sites and subsequent metal-support interaction influences the catalysis.}, doi = {10.1016/j.mcat.2018.05.021}, author = {Burange, Anand S. and Reddy, Kasala Prabhakr and Gopinath, Chinnakonda and Shukla, Rakesh and Tyagi, Avesh K.} } @article {44206, title = {Role of surface ligands in determining the electronic properties of quantum dot solids and their impact on photovoltaic figure of merits}, journal = {Nanoscale}, volume = {10}, year = {2018}, month = {JAN}, pages = {1072-1080}, type = {Article}, abstract = {

Surface chemistry plays a crucial role in determining the electronic properties of quantum dot solids and may well be the key to mitigate loss processes involved in quantum dot solar cells. Surface ligands help to maintain the shape and size of the individual dots in solid films, to preserve the clean energy band gap of the individual particles and to control charge carrier conduction across solid films, in turn regulating their performance in photovoltaic applications. In this report, we show that the changes in size, shape and functional groups of small chain organic ligands enable us to modulate mobility, dielectric constant and carrier doping density of lead sulfide quantum dot solids. Furthermore, we correlate these results with performance, stability and recombination processes in the respective photovoltaic devices. Our results highlight the critical role of surface chemistry in the electronic properties of quantum dots. The role of the size, functionality and the surface coverage of the ligands in determining charge transport properties and the stability of quantum dot solids have been discussed. Our findings, when applied in designing new ligands with higher mobility and improved passivation of quantum dot solids, can have important implications for the development of high-performance quantum dot solar cells.

}, issn = {2040-3364}, doi = {10.1039/c7nr06116a}, author = {Goswami, Prasenjit N. and Mandal, Debranjan and Rath, Arup K.} } @article {44216, title = {Role of the (104) MgCl2 lateral cut in ziegler-natta catalysis: a computational investigation}, journal = {Journal of Physical Chemistry C}, volume = {122}, year = {2018}, month = {JAN}, pages = {285-296}, type = {Article}, abstract = {

Density functional theory (DFT) has been used for the study of ethylene polymerization in the Ziegler-Natta (ZN) olefin polymerization system for eight different alkoxy group containing titanium catalysts (Cat-A-h), Ti(III)Et(OR)(OR{\textquoteright}) (where R =-CH3,-Et,-tert-butyl, cyclohexane, R{\textquoteright} = CH3,-Et,-tert-butyl, cyclohexane). What is of significance is that the catalysts studied were all considered to be tethered to the (104) MgCl2 surface, which has traditionally been considered a {\textquoteleft}{\textquoteleft}dormant{\textquoteright}{\textquoteright} surface in Z-N catalysis systems, in contrast to the {\textquoteleft}{\textquoteleft}more active{\textquoteright}{\textquoteright} (110) MgCl2 surface. Our calculations indicate that the binding of all the catalysts to the (104) surface is favorable, even after taking entropic effects into account. For purposes of comparison, ethylene polymerization has been investigated for the Cat-C (TiEt(OEt)(2)) and the Cat-H (TiEt(CI)(OC4H8Cl)) (OC4H8Cl = the chlorobutoxy group) cases, for both the (i) (110) and the (ii) (104) MgCl2 surfaces. It has been seen that for both (i) and (ii)-the energy gap between insertion and the termination barriers (Delta X) was nearly the same for both the Cat-C and Cat-H eases, which shows that ethylene polymerization on the (104)MgCl2 surface is likely to be a ptoininent occurrence in Z-N catalysis, when alkoxy groups are bound to the titanium center. Additionally, for the Cat-C and the Cat-H cases, the regio-and stereoselective behavior of the propylene monomer on the titanium species present on the (110) and the (104) MgCl2 surfaces has also been investigated, and the results indicate that the (104) MgCl2 surface is only slightly less effective than the (110. However, the calculations also indicate that for Cat-H the (104) MgCl2 surface significantly improves the molecular weight of polypropylene in comparison to the (110) surface, further showcasing how the (104) surface (ignored until date) might be a major player in ZN catalysis. Given that a major portion of the MgCl2 support is made up of (104) lateral cuts, the current findings are of considerable relevance.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.7b07893}, author = {Kumawat, Jugal and Gupta, Virendra Kumar and Vanka, Kumar} } @article {44190, title = {Rufinamide: crystal structure elucidation and solid state characterization}, journal = {Journal of Pharmaceutical and Biomedical Analysis}, volume = {149}, year = {2018}, month = {FEB}, pages = {185-192}, type = {Article}, abstract = {

Rufinamide (R) is a triazole derivative approved for the management of partial seizures and seizures associated with Lennox-Gastaut Syndrome, in November 2007. Crystal structure, solid state characterization, drug-excipient compatibility and solubility play a pivotal role in formulation development. This work deals with the crystal structure elucidation of R by single crystal X-ray diffraction and solid state characterization by thermal, spectroscopic and crystallographic techniques. Drug- excipient compatibility was assessed by differential scanning calorimetry (DSC). New RP-HPLC method for quantification of R was developed with improved retention time. Solubility and dissolution of drug in different media was determined. Additionally, the flow behavior of the drug was evaluated by measuring Carr{\textquoteright}s index and Hausner{\textquoteright}s ratio, while the compressibility behavior was studied using Well{\textquoteright}s protocol. R crystallized from dimethylformamide (R-DMF) was utilized for single crystal analysis. The drug crystallized in triclinic crystal system with P-1 space group. Asymmetric unit cell consists of two molecules of R held by intermolecular hydrogen bond (connected by N-H center dot center dot center dot O, which forms the catemeric chain). Analytical outcomes from DSC, thermogravimetric analysis (TGA) and powder X-ray diffraction (PXRD) revealed that the drug was present in pure crystalline form and was devoid of any polymorphic or pseudopolymorphic impurities. Influence of pH on the solubility and dissolution of R-DMF was found to be insignificant. The drug exhibited poor aqueous solubility, which was improved nearly 4.6 fold with the addition of 2\% sodium lauryl sulphate (SLS). The drug exhibits poor flow and elastic compression nature. Excipients such as poly ethylene glycol (PEG) 8000, SLS, lactose monohydrate, starch and Hydroxypropyl methylcellulose (HPMC) E15 were incompatible with R-DMF as identified by thermal analysis. It is envisaged that these information regarding solid state properties of R-DMF would aid in identifying a logical path for formulation development. (C) 2017 Elsevier B.V. All rights reserved.

}, keywords = {Compressibility, Dissolution media, DSC, HPLC method, solubility}, issn = {0731-7085}, doi = {10.1016/j.jpba.2017.11.003}, author = {Salunke, Nita and Thipparaboina, Rajesh and Chavan, Rahul B. and Lodagekar, Anurag and Mittapalli, Sudhir and Nangia, Ashwini and Shastri, Nalini R.} } @article {44217, title = {Ru(II)-functionalized SBA-15 as highly chemoselective, acid free and sustainable heterogeneous catalyst for acetalization of aldehydes and ketones}, journal = {Catalysis Communications}, volume = {104}, year = {2018}, month = {JAN}, pages = {62-66}, type = {Article}, abstract = {

Combining electron deficient Ru(II) coordination sites with organofunctionalized SBA-15, (L)Ru(Il)@SBA-15, result in a mild, neutral, water scavenger free and chemo-selective acetalization catalyst for cyclic/acyclic acetals. Vacant coordination sites of ruthenium in (L)Ru(II)@SBA-15 activates protecting groups as well as reactants simultaneously and restricts the reverse acetalization reaction. Synthesized (L)Ru(Il)@SBA-15 catalyst has been thoroughly characterized and act as competitive catalyst compared to conventional acid catalysts. (L) RuaD@SBA-15 performs high catalytic activity as well as selectivity within 20 min with high TOF. The catalyst can be recycled and reaction parameters are optimized.

}, keywords = {Acetalization reactions, Acid free, chemo-selective, heterogeneous catalyst, Reusable, Ru(II) immobilized SBA-15}, issn = {1566-7367}, doi = {10.1016/j.catcom.2017.10.016}, author = {Lazar, Anish and Betsy, K. J. and Vinod, C. P. and Singh, A. P.} } @article {45438, title = {Ruthenium-catalyzed regioselective alkenylation/tandem hydroamidative cyclization of unmasked quinazolinones using terminal alkynes}, journal = {Journal of Organic Chemistry}, volume = {83}, year = {2018}, month = {AUG}, pages = {8906-8913}, type = {Article}, abstract = {

Ruthenium-catalyzed amide directed C-sp2-H activation of the quinazolinone scaffold has been demonstrated, leading to the selective mono- or dialkenylation in moderate to good yields to achieve medicinally important stilbene containing quinazolinones. The terminal allcyne is utilized as a coupling partner, which resulted in the selective trans-alkene formation. Electron-deficient phenylacetylenes facilitate alkenylation followed by tandem hydroamidation of the newly generated trans double bond to provide novel quinazolinone alkaloids related to the Luotonine class of natural products.

}, doi = {10.1021/acs.joc.8b01143}, author = {Viveki, Amol B. and Mhaske, Santosh B.} } @article {46236, title = {Raman and Na-23 solid-state NMR studies on the lead-free ferroelectrics Bi-0.5(Na1-xKx)(0.5)TiO3 in the morphotropic phase boundary region}, journal = {Materials Research Bulletin}, volume = {118}, year = {2019}, month = {OCT}, type = {Article}, abstract = {

The local structural changes, due to the substitution of the smaller Na+ by the larger K+ ion, in the lead-free piezoelectric ceramic compositions Bi-0.5(Na1-xKx)(0.5)TiO3 have been studied using Raman and Na-23 solid-state NMR spectroscopy. Different close compositions in the solid solution series Bi-0.5(Na1-xKx)(0.5)TiO3 (0 \<= x \<= 0.36, Delta x = 0.02) are studied in the morphotropic phase boundary (MPB) region arising from the different crystal structures of the end members Bi0.5Na0.5TiO3 and Bi0.5K0.5TiO3. Close correlations between the Raman and NMR parameters with the performance parameters of the system have been observed, suggesting the role of the local structural changes in determining these parameters. Raman and Na-23 NMR studies showed that the onset of the MPB region is at x = 0.16 and the MPB region corresponds to 0.16 \<= x \<= 0.24 where better performance parameters are observed.

}, doi = {10.1016/j.materresbull.2019.110506}, author = {Anjali, K. and Ajithkumar, T. G. and Joy, P. A.} } @article {46109, title = {Rapid and efficient sequestration of arsenic from contaminated water using hypertolerant Bacillus L-148 sp.: a two-step process}, journal = {Green Chemistry}, volume = {21}, year = {2019}, month = {MAY }, pages = {2245-2251}, type = {Article}, abstract = {

A fast, robust and green bioreactor for arsenic sequestration from contaminated water was designed. In the two-tier bioreactor, bacterial arsenite detoxification (1 mM) was carried out followed by precipitation of arsenate in 5 min. The precipitate could be used for supercapacitor applications. This bioreactor yielded arsenic free water, therefore, this method can be adopted for scale-up. The combination of hypertolerant bacteria and fast precipitation indicates the robustness of this pilot bioreactor.

}, issn = {1463-9262}, doi = {10.1039/c9gc00878k}, author = {Bagade, Aditi and Nandre, Vinod and Ghosh, Sayanti and Battu, Shateesh and Haram, Santosh and Giri, Ashok and Kodam, Kisan} } @article {45569, title = {Rapid and greener method for utilization of plaster of paris (POP) waste generated from biomedical samples}, journal = {International Journal of Environmental Science and Technology}, volume = {16}, year = {2019}, month = {OCT}, pages = {2475-2480}, type = {Article}, abstract = {

Plaster of Paris (POP) is one of the recalcitrant wastes generated from dentistry and orthopaedic materials used in healthcare sector. The current practice of disposal of POP waste-harbouring biomedical material by incineration is very critical and environmentally unfriendly. The eco-friendly and rapid disintegration of such biomedical-related POP waste was done by treating with ammonium bicarbonate solution (20\% w/v ABC) to form non-hazardous products like ammonium sulphate and calcium carbonate in the form of sludge. The ammonium sulphate (NH4)2SO4 is generally used in agriculture as a chemical fertilizer and calcium carbonate (CaCO3) as an additive in construction sector making this process cost-effective and value addition. Interestingly, 20\% ABC solution also had significant antibiofilm, antimicrobial activity against fungi, yeast and bacterial strains probably due to its high pH-driven osmotic effect. Therefore, 20\% ABC solution finds dual eco-friendly application in disinfection of used POP, especially arising from biomedical waste from patients.

}, keywords = {Biomedical waste, Eco-friendly disintegration, Plaster of Paris waste}, issn = {1735-1472}, doi = {10.1007/s13762-018-2070-7}, author = {Navale, G.R. and Gohil, K.N. and Puppala, K.R. and Shinde, S.S. and Umbarkar, S. and Dharne, M.S.} } @article {46057, title = {Realization of efficient field emitter based on reduced graphene oxide-Bi2S3 heterostructures}, journal = {Physica Status Solidi A-Applications and Materials Science}, year = {2019}, month = {JUL}, pages = {1900121}, type = {Article; Early Access}, abstract = {

Herein, Bi2S3 nanorods and reduced graphene oxide (rGO)-Bi2S3 heterostructures are synthesized using a simple hydrothermal method. The structural, morphological, chemical, and elemental analysis of as-synthesized materials is performed using X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Field emission (FE) studies are carried out on both pristine Bi2S3 nanorods and rGO-Bi2S3 heterostructure samples at a base pressure of approximate to 1 x 10(-8) mbar. The results show that the rGO-Bi2S3 heterostructure emitter has superior FE performance compared to pristine Bi2S3 emitters in terms of the turn-on field (2.6 V mu m(-1) at 10 mu A cm(-2)) and threshold field (4.0 V mu m(-1) at 100 mu A cm(-2)) along with a high emission current density of approximate to 1464 mu A cm(-2) at an applied electric field of 7.0 V mu m(-1). The rGO-Bi2S3 heterostructure emitter exhibits very good emission current stability, tested for more than 3 h duration, characterized by standard deviation values approximate to 2.84 and 4.06, corresponding to preset values 12 and 100 mu A. This study implies that one-step hydrothermal route can be efficiently used to synthesize organic-inorganic heterostructures that possess unique morphology. Furthermore, the synthesized rGO-Bi2S3 heterostructure emitter shows potential as an electron source for practical application in vacuum microelectronic devices.

}, keywords = {Bi2S3, field emission, Heterostructures, Nanorods, Reduced graphene oxide}, issn = {1862-6300}, doi = {10.1002/pssa.201900121}, author = {Gote, Gorkshnath H. and Bhopale, Somnath R. and More, Mahendra A. and Late, Dattatray J.} } @article {46202, title = { Recent advances in the synthesis of oxaspirolactones and their application in the total synthesis of related natural products }, journal = {Organic \& Biomolecular Chemistry}, volume = {17}, year = {2019}, month = {AUG}, pages = {7270-7292}, type = {Review}, abstract = {

Oxaspirolactones are ubiquitous structural motifs found in natural products and synthetic molecules with a diverse biochemical and physicochemical profile, and represent a valuable target in natural product chemistry and medicinal chemistry. Since the 1970s, numerous innovative synthetic methodologies have been reported for these scaffolds in the context of expanding the range of potential building blocks, catalysts, and modes of transformations (racemic or asymmetric protocols). This review focuses on a broad spectrum of approaches toward the synthesis of oxaspirolactones and their potential application in the total synthesis of biologically relevant natural products starting from the first disclosure to the latest report.

}, doi = {10.1039/c9ob01212e}, author = {Thorat, Sagar S}, editor = {Kontham, Ravindar} } @article {46358, title = {Recursive partitioning analysis and anti-tubercular screening of 3-aminopyrazine-2-carbohydrazide derivatives}, journal = {Letters in Drug Design \& Discovery}, volume = {16}, year = {2019}, month = {APR}, pages = {1264-1275}, type = {Article}, abstract = {

Background: Treating tuberculosis is a challenge due to the development of drug resistance. Hence, it is imperative to develop novel leads having high potency and efficacy to curb drug resistance. Methods: The present research work is focused on microwave-assisted synthesis of novel twenty-six 3-amino-N{\textquoteright}-benzylidenepyrazine-2-carbohydrazide derivatives (3a-z), where, lyophilization technique was used for isolation of the major intermediate, 3-aminopyrazin-2-carbohydrazide. All synthesized compounds were subjected for anti-tubercular screening against Mycobacterium tuberculosis H37Ra by using XTT Reduction Menadione Assay (XRMA) protocol. Results: Out of 26 synthesized compounds, four N{\textquoteright}-substitutedbenzaldehyde-3-amino-pyrazine-2-carbohydrazide derivatives viz. 3i, 3j 3v and 3z showed significant activity against M. tuberculosis H37Ra. The compounds 3i, 3j, 3v and 3z showed 99, 98, 92 and 87 \% inhibition respectively as compared to 94\% inhibition shown by the standard drug rifampicin. The MIC and IC50 values were in the range of 24.3-110 and 5.9-20.8 mu g/ml respectively. Conclusion: A classification model called Recursive Partitioning (RP) based on binary Quantitative Structure-Activity Relationship (QSAR) was derived for the establishment of structure-activity relationship (SAR). The predictions derived on the basis of RP model were found to be in agreement with anti-tubercular screening data.

}, keywords = {3-aminopyrazine, anti-tubercular activity, Carbohydrazide, lyophilization, QSAR, recursive partitioning}, issn = {1570-1808}, doi = {10.2174/1570180816666190329222636}, author = {Miniyar, Pankaj and Mahajan, Anand and Anuse, Dattatray and Kumar, Ashish and Barmade, Mahesh and Sarkar, Dhiman and Arkile, Manisha and Khedkar, Vijay} } @article {46332, title = {Regioselective one-pot synthesis of 3-fluoro-imidazo[1,2-a]pyridines from styrene}, journal = {Asian Journal of Organic Chemistry}, year = {2019}, month = {OCT}, type = {Article; Early Access}, abstract = {

A one-pot synthesis of C-3 fluorinated imidazopyridines (F-IMPY) is reported under the additive-free conditions from commercially available styrene and 1-fluoropyridinium tetrafluoroborate as a fluorine source. The substrate styrene undergoes keto-bromination/condensation/fluorination transformation in three sequential steps to furnish F-IMPY. This one-pot synthesis method exhibits broad substrate scope and good functional group tolerance with a good yield (up to 82\%).

}, keywords = {fluorination, imidazopyridines (F-IMPY), One-pot synthesis}, issn = {2193-5807}, doi = {10.1002/ajoc.201900521}, author = {Said, Madhukar S. and Mishra, Ankita and Pandole, Satish and Nayak, Rashmi A. and Kumar, Pradeep and Gajbhiye, Jayant M.} } @article {46056, title = {Regioselective oxidation of indoles to 2-oxindoles}, journal = {Organic \& Biomolecular Chemistry}, volume = {17}, year = {2019}, month = {JUL}, pages = {6671-6677}, type = {Article}, abstract = {

Facile regioselective oxidation of indoles to 2-oxindoles promoted by sulfuric acid adsorbed on silica gel is reported. The demonstrated practical site-selective heterogeneous oxidation reactions conveniently take place with a broad substrate scope and functional group tolerances. The present oxidation strategy is also employed to accomplish the total synthesis of natural products donaxaridine and donaxarine. On the basis of analytical and spectral data it is evidenced that donaxarine stays in equilibrium with its hydrated ring opened form. The structural features essential for this type of oxidation and plausible mechanism are discussed in brief.

}, issn = {1477-0520}, doi = {10.1039/c9ob00764d}, author = {Shelar, Santosh V. and Argade, Narshinha P.} } @article {46240, title = {Relativistic coupled-cluster investigation of parity (P) and time-reversal (T) symmetry violations in HgF}, journal = {Journal of Chemical Physics}, volume = {150}, year = {2019}, month = {FEB}, type = {Article}, abstract = {

We employ the Z-vector method in the four-component relativistic coupled-cluster framework to calculate the parity (P) and time-reversal (T) symmetry violating scalar-pseudoscalar nucleus-electron interaction constant (W-s), the effective electric field (E-eff) experienced by the unpaired electron, and the nuclear magnetic quadrupole moment-electron interaction constant (W-M) in the open-shell ground electronic state of HgF. The molecular frame dipole moment and the magnetic hyperfine structure (HFS) constant of the molecule are also calculated at the same level of theory. The outcome of our study is that HgF has a high value of E-eff (115.9 GV/cm), W-s (266.4 kHz), and W-M (3.59 x 10(33) Hz/e cm(2)), which shows that it can be a possible candidate for the search of new physics beyond the standard model. Our results are in good agreement with the available literature values. Furthermore, we investigate the effect of the basis set and the virtual energy functions on the computed properties. The role of the high-energy virtual spinors is found to be significant in the calculation of the HFS constant and the P,T-odd interaction coefficients. Published under license by AIP Publishing.

}, doi = {10.1063/1.5083000}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {46187, title = {Remarkably distinct mechanical flexibility in three structurally similar semiconducting organic crystals studied by nanoindentation and molecular dynamics}, journal = {Chemistry of Materials}, volume = {31}, year = {2019}, month = {FEB}, pages = {1391-1402}, type = {Article}, abstract = {

Distinct macroscopic mechanical responses of the three crystals of naphthalene diimide derivatives, 1Me, 1Et, and 1nPr, studied here are very intriguing because their molecular structures are very similar, with the difference only in the alkyl chain length. Among the three crystals examined, 1Me shows highly plastic bending nature, 1Et shows elastic flexibility, and 1nPr is brittle. A detailed investigation by nanoindentation and molecular dynamics (MD) simulations allowed us to correlate their distinct mechanical responses with the way the weak interactions pack in crystal structures. The elastic modulus (E) of 1Me is nearly an order of magnitude lower than that of 1Et, whereas hardness (H) is less than half. The low values of E and H of 1Me indicate that these crystals are highly compliant and offer a low resistance to plastic flow. As the knowledge of hardness and elastic modulus of molecular crystals alone is insufficient to capture their macroscopic mechanical deformation nature, that is, elastic, brittle, or plastic, we have employed three-point bending tests using the nanoindentation technique. This allowed a quantitative evaluation of flexibility of the three mechanically distinct semiconducting molecular crystals, which is important for designing larger-scale applications; these were complemented with detailed MD simulations. The elastic 1Et crystals showed remarkable flexibility even after 1000 cycles. The results emphasize that the alkyl side chains in functional organic crystals may be exploited for tuning their self-assembly as well as their mechanical properties. Hence, the study has broad implications, for example, in crystal engineering of various flexible, ordered molecular materials.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.8b04800}, author = {Devarapalli, Ramesh and Kadambi, Sourabh Bhagwan and Chen, Chun-Teh and Krishna, Gamidi Rama and Kammari, Bal Raju and Buehler, Markus J. and Ramamurty, Upadrasta and Reddy, C. Malla} } @inbook {47480, title = {Removal of pharmaceutical and personal care products from wastewater using advanced materials}, booktitle = {Pharmaceuticals and Personal Care Products: Waste Management and Treatment Technology}, number = {Emerging Contaminants and Micro Pollutants}, year = {2019}, pages = {173-212}, publisher = {Elsevier}, organization = {Elsevier}, abstract = {Recently, pharmaceuticals and personal care products (PPCPs) have attracted much attention because of their requirement in everyday life and huge production/consumption worldwide. India{\textquoteright}s pharmaceutical industry has emerged as the world{\textquoteright}s third largest in terms of volume of production. As a leading science-based industry, the pharmaceutical industry contributes to the tune of 1\% of India{\textquoteright}s total GDP. Ever increasing international demand of these products drives continued rapid expansion of the pharmaceutical industry. India becomes a preferred manufacturing location for PPCPs, which is obvious from the export of PPCPs to over 65 countries. This is primarily because of the manufacturing cost advantage. Nevertheless, the major concern of these PPCPs is their nonpassive nature. They are not benign travelers in the environment but rather they are bioaccumulative and their retention becomes toxic to wildlife and human beings. It is reported that residual PPCPs may cause endocrine disruptions that can change hormonal actions, although the adverse impact of PPCPs on human health and the environment is still not fully understood. Therefore, there is an urgent need to protect our limited water resources and the available aquatic species from deterioration due to residual PPCPs. A variety of technologies, including physical, biological, and chemical processes, have been extensively investigated for the removal of PPCPs from wastewater. Recently, advanced oxidation processes (AOPs) and advanced materials have shown great promise as an efficient alternative for mineralization of such refractory species. Therefore, a critical review of the recent advances in PPCP removal is imperative to gauge their performance. In this chapter, we briefly summarize the advances made in the technologies for PPCPs removal, followed by an in-depth review of the removal of PPCPs by advanced materials and AOPs.}, doi = {10.1016/B978-0-12-816189-0.00008-1}, author = {Morone, Amruta and Mulay, Prajakatta and Kamble, Sanjay P.} } @article {46178, title = {Re-purposing is needed for beneficial bugs, not for the drugs}, journal = {International Microbiology}, volume = {22}, year = {2019}, month = {MAR}, pages = {1-6}, type = {Review}, abstract = {

Between 150 and 200 species of plants, insects, birds or mammals go extinct every day. We do not have any idea what the global extinction rate for microorganisms is. What is clear is that we have already lost a maximum number of the microbes that used to live in and on our skins. Many of our microbial partners are facing extinction as we apply selection pressures that are unprecedented in our long-standing relationships. Recent estimates are that we have lost at least one third of the diversity of our skin microbiome. Every day, most of us bath or shower in water that contains chlorine or fluorine; these additives do a great job of killing pathogenic microbes, but they are probably not helping our skin microbiome. Most of the people apply cosmetic products every day, as these products contain preservatives that prevent microbial growth on the shelf. These same chemicals may well kill microbes on the skin. The daily use of high-pH soaps probably will not help microbial life that is adapted to living on the skin{\textquoteright}s natural pH of 5. The rise in the rate of C-section births from around 5\% in 1970 to more than 30\% today is likely to be a contributing factor. Vaginal microbes seed our skins at birth and C-sections disrupt this process. The overuse of broad-spectrum antibiotics has contributed to the loss of our microbial partners in all body sites and the skin is no exception. It is now clear that skin is an ecosystem that is dependent on commensal microbes for optimal health. In general, a diverse ecosystem is a healthy ecosystem that is robust in the face of change. Low-diversity ecosystems are more fragile and susceptible to dysbiosis. Eczema and acne rates have increased rapidly over the last 50 years. These diseases are almost unknown in hunter-gatherer communities. Now, we face two exciting challenges: finding out which species matter and how to get them back.

}, keywords = {Drugs, Dysbiosis, Microbiome, Probiotics}, issn = {1139-6709}, doi = {10.1007/s10123-018-00049-x}, author = {Ram, Hari and Dastager, Syed G.} } @article {46045, title = {Resolving the conformational dynamics of ErbB growth factor receptor dimers}, journal = {Journal of Structural Biology}, volume = {207}, year = {2019}, month = {AUG }, pages = {225-233}, type = {Article}, abstract = {

The combinatorial dimerization of the ErbB growth factor receptors (ErbB(1) - ErbB(4)) are critical for their function. Here, we have characterized the conformational dynamics of ErbB transmembrane homo-dimers and hetero-dimers by using a coarse-grain simulation framework. All dimers, except ErbB (4-4) and ErbB(1-4), exhibit at least two conformations. The reported NMR structures correspond to one of these conformations, representing the N-terminal active state in ErbB(1-1) (RH2), ErbB(2-2) (RH1) and ErbB(4-4) (RH) homo-dimers and the LH dimer in ErbB(3-3) homo-dimer, validating the computational approach. Further, we predict a right-handed ErbB(4) dimer conformer that warrants experimental testing. The five hetero-dimers that have not yet been experimentally resolved display prominent right-handed dimers associating by the SmXXXSm motif. Our results provide insights into the constitutive signaling of ErbB(4) after cleavage of the extracellular region. The presence of the inactive-like dimer conformers leading to symmetric kinase domains gives clues on the autoinhibition of the receptor dimers. The dimer states characterized here represent an important step towards understanding the combinatorial cross associations in the ErbB family.

}, keywords = {Martini coarse-grained simulations, Membrane protein structure, Transmembrane dimer}, issn = {1047-8477}, doi = {10.1016/j.jsb.2019.05.013}, author = {Pawar, Aiswarya B. and Sengupta, Durba} } @article {45604, title = {Retraction: a highly concise and practical route to clavaminols, sphinganine and (+)-spisulosine via indium mediated allylation of α-hydrazino aldehyde and a theoretical insight into the stereochemical aspects of the reaction}, journal = {RSC Advances}, volume = {9}, year = {2019}, month = {FEB}, pages = {3336-3336 }, type = {Article}, abstract = {A conceptually different approach has been employed for the synthesis of 1,2-amino alcohols by proline-catalyzed α-amination of aldehyde and one-pot indium mediated allylation of the crude α-hydrazino aldehydes. DFT based quantum chemical calculations have been performed to obtain a quantitative explanation of the stereoselectivity of the reaction.}, doi = {10.1039/C9RA90005E}, author = {Pandey, M. and Chowdhury, P. S. and Dutta, A. K. and Kumar, P. and Pal, S.} } @article {46186, title = {Retraction: organocatalytic stereoselective synthesis of passifloricin A (Retraction of Vol 10, Pg 1820, 2012)}, journal = {Organic \& Biomolecular Chemistry}, volume = {17}, year = {2019}, month = {FEB}, pages = {2289}, type = {Retraction}, issn = {1477-0520}, doi = {10.1039/c9ob90027f}, author = {Kumar, Pradeep and Pandey, Menaka and Gupta, Priti and Dhavale, Dilip D.} } @article {46103, title = {Reusable cobalt catalyst for reversible acceptorless dehydrogenation and hydrogenation of N-Heterocycles}, journal = {ChemCatChem}, volume = {11}, year = {2019}, month = {MAY}, pages = {2449-2457}, type = {Article}, abstract = {

The development of robust catalytic systems based on basemetals for reversible acceptorless dehydrogenation (ADH) and hydrogenation of feedstock chemicals is very important in the context of {\textquoteleft} hydrogen storage{\textquoteright}. Herein, we report a highly efficient reusable cobalt-based heterogeneous catalyst for reversible dehydrogenation and hydrogenation of N-heterocycles. Both the ADH and the hydrogenation processes operate under mild, benign conditions.

}, doi = {10.1002/cctc.201900367}, author = {Jaiswal, Garima and Subaramanian, Murugan and Sahoo, Manoj K. and Balaraman, Ekambaram} } @article {46039, title = {Ring opening polymerization of lactide: kinetics and modeling}, journal = {Chemical Engineering Communications}, volume = {206}, year = {2019}, month = {SEP }, pages = {1159-1167}, type = {Article}, abstract = {

The ring opening polymerization (ROP) kinetics of L-lactide was studied in bulk at 150, 160, and 180 degrees C using stannous octoate [Sn(Oct)(2)] catalyst and 1-pyrene butanol co-catalyst. The effect of different parameters namely, time and co-catalyst to catalyst ratio was studied on the properties of polylactide. The experimental results showed high conversion of L-lactide. The kinetics of L-lactide ROP follows the co-ordination insertion mechanism. The experimental results obtained were studied to account for the reversible activation, propagation, termination, and validated by modeling using MATLAB. The model developed successfully predicts the monomer conversion and the kinetics of L-lactide ROP.

}, keywords = {1-pyrene butanol, Average molecular weights, GPC, kinetics, L-Lactide, Modeling and simulation, Polymerization temperature, Proton NMR, ROP, Stannous octoate}, issn = {0098-6445}, doi = {10.1080/00986445.2018.1550395}, author = {Metkar, Sangeeta and Sathe, Vivek and Rahman, Imran and Idage, Bhaskar and Idage, Susheela} } @article {46176, title = {Robust micropropagation protocol for genetically true to type plants of Phule Arakta pomegranate}, journal = {Indian Journal of Horticulture}, volume = {76}, year = {2019}, month = {MAR}, pages = {23-31}, type = {Article}, abstract = {

A rapid and reproducible micropropagation protocol for pomegranate cv. Phule Arakta has been developed using nodal segments of field grown plant. Bud break was induced in basal Woody Plant Medium (WPM) as well as compared when WPM was supplemented with plant growth regulators. Multiple shoot proliferation was induced in the nodal segments on WPM fortified with different concentration of benzyladenine (BAP) where 2mg/I BAP developed maximum number of shoots. Elongation of shoots was further amplified with the addition of adjuvant silver nitrate. Browning of culture medium was controlled by the addition of polyvinylpyrrolidone (PVP) and regular sub-culturing enhanced shoot multiplication as well as elongation. Rooting was induced in the regenerated shoots using Indole-3-butyric acid (IBA) and 3-Indoleacetic acid where best result was obtained using shock treatment with NAA. Sub-culturing resulted in denser and better rooting. The rooted plantlets were further acclimatized and then established in soil. The clonal fidelity of the in vitro grown cultures was assessed using Random Amplified Polymorphic DNA (RAPD) and Inter Simple Sequence Repeats (ISSR) markers. The 10 RAPD decamers produced 55 bands and 4 ISSR produced 19 bands in total. RAPD primers OPC-08, OPC-13 and OPD-07 produced the highest number of distinct bands and ISSR primer UBC-834 produced maximum distinct bands. All the bands were monomorphic which confirms the genetic fidelity of the in-vitro raised P. granatum cv. Phule Arakta and supported the method of mass production of true to type progenies using tissue culture.

}, keywords = {genetic fidelity, ISSR, Punica granatum, RAPD}, issn = {0972-8538}, doi = {10.5958/0974-0112.2019.00004.5}, author = {Raman, Taramla and Gupta, Vidya S. and Shukla, Susmita} } @article {46141, title = {Role of hydrogen bonding in cocrystals and coamorphous solids: indapamide as a case study}, journal = {Crystengcomm}, volume = {21}, year = {2019}, month = {APR }, pages = {2043-2048}, type = {Article}, abstract = {

The stronger sulfonamide-pyridine (SO2NH2 center dot center dot center dot N-Py) and sulfonamide-carboxamide (SO2NH2 center dot center dot center dot O = C-NH) hydrogen bonds direct the formation of cocrystals, while the weaker sulfonamide-amine (SO2NH2 center dot center dot center dot N-H) hydrogen bond results in coamorphous products. IDP-PIP and IDP-ARG coamorphous solids exhibit remarkable stability under accelerated conditions.

}, issn = {1466-8033}, doi = {10.1039/c8ce01075g}, author = {Allu, Suryanarayana and Suresh, Kuthuru and Bolla, Geetha and Mannava, M. K. Chaitanya and Nangia, Ashwini} } @article {45628, title = {Role of Li+ and Fe3+ in modified ZnO: Structural, vibrational, opto-electronic, mechanical and magnetic properties}, journal = {Ceramics International}, volume = {45}, year = {2019}, month = {JAN}, pages = {7232-7243}, type = {Article}, abstract = {When Fe is doped in ZnO, a situation of charge imbalance is created due to the higher charge of Fe3+. A charge balance may be obtained by co-doping Li+0.5Fe3+0.5 combinations. A solid solution of Zn1-x(Fe0.5Li0.5)xO (0 <= x <= 0.03125) is synthesized with this viewpoint. The crystallites belong to a wurtzite P63mc space group, with lattice parameters a, b and c increasing nominally for x = 0.0156 and thereafter remaining invariant. The size varies in the range ~ 60{\textendash}142 nm. Interstitials of Li and Zn ions are formed. Along with Fe3+ substitution these defects are reasons for O interstitials. These oxygen interstitials increase the red emission while reduction of oxygen vacancies reduces the green emission. These point defects create structural distortion and strain which can generate Zn vacancies. Bandgap reduces due to shallow defects. Mid-bandgap states due to oxygen interstitials and Fe 3d-O 2p hybridization result in NIR emission. On the other hand the crystal surface deforms due to Li addition which hardens the materials. A weak ferromagnetism appears at very low temperature which is enhanced by Li+ addition. Long range exchange mechanism between Fe3+ ions appears in the samples, mediated by magnetic polarons due to point defects.}, keywords = {hardness, NIR emission, Shallow and deep level defects, Weak ferromagnetism, ZnO}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2019.01.004}, author = {Bajpai, G. and Moirangthem, I. and Sarkar, S. and Barman, S. R. and Vinod, C. P. and Bajpai, S. and Riyajuddin, S. and Ghosh, K. and Basaula, D. R. and Khan, M. and Liu, S. -W. and Biring, S. and Sen, S.} } @article {46319, title = {Role of particle morphology in the yielding behavior of dense thermosensitive microgel suspensions}, journal = {Journal of Applied Polymer Science}, year = {2019}, month = {OCT}, pages = {48625}, type = {Article; Early Access}, abstract = {

The yielding behavior of dense thermosensitive microgel suspensions of poly(N-isopropylacrylamide) with two different particle morphologies viz core-shell (CS) morphology and particles with uniform crosslink density were studied. Structural properties were examined using dynamic light scattering and yielding behavior was investigated by nonlinear oscillatory rheology. Suspensions of particles with uniform crosslinking density showed a typical hard sphere like behavior with the loss modulus (G {\textquoteleft}{\textquoteright}) exhibiting a single peak due to cage breaking while CS type particles shows a double yielding at different ranges of strain similar to that seen in attractive colloidal glasses. The first yielding process in CS microgels is interpreted as due to the disentanglement of the overlapped polymer chains from the shells of the neighboring microgels and the second yielding process due to the breakage of cages formed by neighboring microgel particles. Current study suggests that the interpenetration of polymer chains at high concentrations sets in an attractive like potential leading to double yielding phenomena in an otherwise purely repulsive system. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 137, 48625.

}, issn = {0021-8995}, doi = {10.1002/app.48625}, author = {Jathavedan, Kiran Kaithakkal and Kanheerampockil, Fayis and Bhat, Suresh} } @article {46169, title = {Role of structural distortion in stabilizing electrosynthesized blue emitting phosphorene quantum dots}, journal = {Journal of Physical Chemistry Letters}, volume = {10}, year = {2019}, month = {MAR }, pages = {973-980}, type = {Article}, abstract = {

Luminescent phosphorene quantum dots (PQDs) have emerged as fascinating nanomaterials for potential applications in optoelectronics, catalysis, and sensing. Herein, we investigate the structural distortion of black phosphorus (BP) under an applied electric field to yield blue luminescent PQDs [average diameter 8 +/- 1.5 nm (N = 60)]. The electrosynthesized PQDs exhibit photoluminescence emission independent of excitation wavelength with 84\% quantum efficiency. Structural distortion that occurred during the transformation of BP to PQDs is confirmed by results obtained during transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. Further, using first-principles-based density functional theory, calculations on oxygenated and nonoxygenated PQDs augment the experimental observations that an optimum oxygen content maintains the structural integrity of PQDs, above which the structural robustness of PQDs is drastically diminished.

}, issn = {1948-7185}, doi = {10.1021/acs.jpclett.8b03600}, author = {Valappil, Manila Ozhukil and Joshi, Krati and John, Lisa and Krishnamurthy, Sailaja and Jana, Bikash and Patra, Amitava and Pillai, Vijayamohanan K. and Alwarappan, Subbiah} } @article {46130, title = {Room temperature catalytic dehydrogenation of cyclic amines with the liberation of H-2 using water as a solvent}, journal = {Green Chemistry}, volume = {21}, year = {2019}, month = {APR }, pages = {2119-2128}, type = {Article}, abstract = {

Catalytic dehydrogenation of cyclic amines, in particular partially saturated N-heterocycles to N-heterocyclic arenes, with the removal of molecular hydrogen as the sole byproduct in water is reported. This dehydrogenation reaction proceeds smoothly under very mild and benign conditions and operates at room temperature. This distinctive reactivity has been achieved under dual catalytic conditions by merging the visible-light active [Ru(bpy)(3)](2+) as the photoredox catalyst and a newly synthesized cobalt complex as the proton-reduction catalyst. A detailed mechanistic study (control experiments, electrochemical studies, UV-visible experiments) is presented for the present dual catalysis.

}, issn = {1463-9262}, doi = {10.1039/c9gc00201d}, author = {Sahoo, Manoj K. and Balaraman, Ekambaram} } @article {46433, title = {Room-temperature asymmetric transfer hydrogenation of biomass-derived levulinic acid to optically pure gamma-valerolactone using a ruthenium catalyst}, journal = {ACS Omega}, volume = {4}, year = {2019}, month = {NOV }, pages = {19491-19498}, type = {Article}, abstract = {

This study presents a first report on ruthenium-catalyzed asymmetric transfer hydrogenation (ATH) of levulinic acid (LA) to chiral gamma-valerolactone (GVL). ATH of LA has been explored with Noyori{\textquoteright}s chiral catalyst (Ru-TsDPEN) in methanol solvent. Efficacy of ATH reaction of LA was investigated under different reactions conditions such as temperature, catalyst, and hydrogen donor concentration. The effect of various organic tertiary bases along with formic acid (FA) as a hydrogen donor was studied, and N-methylpiperidine with FA (1:1 molar ratio) was revealed as an efficient hydrogen donor for ATH of LA to GVL furnishing chiral GVL with complete conversion and 93\% enantiomeric excess (ee). This operationally simple and mild ATH protocol was tested for practical applicability of ATH of LA obtained from biomass waste (rice husk and wheat straw) and furnished chiral GVL with 82\% ee.

}, issn = {2470-1343}, doi = {10.1021/acsomega.9b03424}, author = {Shende, Vaishali S. and Raut, Amol B. and Raghav, Prathamesh and Kelkar, Ashutosh A. and Bhanage, Bhalchandra M.} } @article {46275, title = {Route to access imidazol[1,5-a]indole-1,3-diones and pyrrolo[1,2-c]imidazole-1,3-diones}, journal = {Organic \& Biomolecular Chemistry}, volume = {17}, year = {2019}, month = {SEP}, pages = {8384-8390}, type = {Article}, abstract = {

A novel and practical route to synthesize imidazol[1,5-a]indoles and pyrrolo[1,2-c]imidazoles via N-H functionalization has been developed. Indole-2-carboxylic acid or pyrrole-2-carboxylic acid with diverse aniline groups and carbonyldiimidazole (CDI), in the presence of a base under microwave conditions, resulted in imidazol[1,5-a]indoles and pyrrolo[1,2-c]imidazoles, respectively. The present method is free of work-up and no need for column chromatography. Both title scaffolds can serve as useful heterocyclic scaffolds in medicinal chemistry as such, or they can be used as building blocks to construct different classes of useful compounds.

}, doi = {10.1039/c9ob01462d}, author = {Rao, Ramana Sreenivasa and Shajan, Fere Joseph and Reddy, D. Srinivasa} } @article {46193, title = {Ru-catalyzed regioselective cascade annulation of acrylamides with 2-alkynoates for the synthesis of various 6-Oxo nicotinic acid esters}, journal = {Journal of Organic Chemistry}, volume = {84}, year = {2019}, month = {FEB }, pages = {1863-1870}, type = {Article}, abstract = {

Ru-catalyzed regioselective cascade annulation of acrylamides with 2-alkynoates via aza-Michael/C-H activation sequence for the synthesis of various 6-oxo nicotinic acid esters is described. The regioselectivity of the protocol has been confirmed by performing silver mediated protodecarboxylation of the corresponding 6-oxo nicotinic acid to furnish 2-pyridone. The developed protocol is copper or silver salt-free and uses inexpensive, safe, and environmentally benign peroxide-based {\textquoteleft}{\textquoteleft}oxone{\textquoteright}{\textquoteright} as the sole oxidant. A redox-neutral version of the protocol is also demonstrated.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.8b02783}, author = {Garad, Dnyaneshwar N. and Mhaske, Santosh B.} } @article {46110, title = {Ru(II)-catalyzed C-H activation/alkylation of 3-formylbenzofurans with conjugated olefins: product divergence}, journal = {Journal of Organic Chemistry}, volume = {84}, year = {2019}, month = {MAY }, pages = {5056-5066}, type = {Article}, abstract = {

Ru-catalyzed alkylation of 3-formylbenzofuran with acrylates and acrylamides has been described. Branched selectivity with unsubstituted or beta-substituted acrylates/ acrylamides and linear selectivity with alpha-substituted acrylates have been observed. However, in all of the cases, the intermediate alkylation products seem to undergo further reactions, either cycloannulation or deformylation, depending on the substrate employed. For example, with methyl acrylate, the intermediate branched alkylation product underwent cycloannulation with another molecule of methyl acrylate, resulting in a densely functionalized cyclohexene ring formation. On the other hand, in the case of N-monosubstituted acrylamides, the branched alkylation proceeded with intramolecular aldehyde-amide condensation, leading to pyridin-2-one ring annulation. However, with both methacrylate and crotonate, deformylation of the initially formed alkylation products was observed.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.8b03267}, author = {Srinivas, Kolluru and Siddiqui, Shaziyaparveen K. and Mudaliar, Jyothi K. and Ramana, Chepuri V.} } @article {45591, title = {Rylene diimide-based alternate and random copolymers for flexible supercapacitor electrode materials with exceptional stability and high power density}, journal = {Journal of Physical Chemistry C}, volume = {123}, year = {2019}, month = {JAN}, pages = {2084{\textendash}2093}, type = {Article}, abstract = {Donor{\textendash}acceptor pi-conjugated polymers are emerging as interesting electrode materials for supercapacitor device applications. They offer an exciting possibility of charge storage in both positive and negative electrodes because they are both p- and n-dopable. The ambipolar charging enables higher operating voltage, which can afford higher specific energy and power densities. The donor{\textendash}acceptor design can be either donor-alternate-acceptor or donor-random-acceptor. This architectural variation has the potential to modify the charge storage; yet surprisingly not much literature data is available exploiting this aspect. This paper explores the alternate and random geometries of donor{\textendash}acceptor π-conjugated polymers based on naphthalene diimide or perylene diimide (PDI) as the acceptor component and benzodithiophene (BDT) as the donor component and their application as composite electrode materials in a type III supercapacitor device. Results show that the donor{\textendash}acceptor alternate design involving P(PDI-alt-BDT) is an excellent supercapacitor electrode material with specific capacitance of 113 F g{\textendash}1 with excellent stability up to 4000 cycles and almost 100\% retention of the initial capacitance in a single-electrode setup in a PC-LiClO4 organic electrolyte. A flexible supercapacitor device was also fabricated which shows areal capacitance of 35 mF cm{\textendash}2 at a current density of 0.5 mA cm{\textendash}2, which is promising for commercial applications.}, doi = {10.1021/acs.jpcc.8b11229}, author = {Sharma, S. and Soni, R. and Kurungot, S. and Asha, S. K.} } @article {46607, title = {Radical rearrangement of aryl/alkylidene malononitriles via aza michael addition/decynoformylation/addition sequence: an access to alpha-aminonitriles and alpha-aminoamides}, journal = {Journal of Organic Chemistry}, volume = {85}, year = {2020}, month = {DEC }, pages = {14858-14865}, type = {Article}, abstract = {

An efficient, safe, and environmentally friendly tertiary butyl hydrogen peroxide (TBHP)-mediated rearrangement of aryl/alkylidene malononitrile with anilines has been developed with in situ generation of HCN as the cyanide source for the synthesis of substituted alpha-aminonitriles and alpha-aminoamide. A diverse set of alpha-aminonitriles and alpha-aminoamides was efficiently synthesized in good to excellent yields. This method features a broad substrate scope and good functional group tolerance, and the in situ-generated HCN bypasses the use of an external cyanide source.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.0c01358}, author = {Bhoite, Shubhangi P. and Bansodes, Ajay H. and Suryavanshi, Gurunath} } @article {46822, title = {Rapid synthesis of zwitterionic phosphonium benzoates by a three-component coupling involving phosphines, arynes and CO2}, journal = {Chemistry-An Asian Journal}, volume = {15}, year = {2020}, month = {JUL}, pages = {2203-2207}, type = {Article}, abstract = {

A mild and easy to perform multicomponent coupling involving phosphines, arynes generated from 2-(trimethylsilyl)aryl triflates, and CO(2)allowing the transition-metal-free synthesis of zwitterionic phosphonium benzoates has been developed. The reaction proceeds via the generation of 1 : 1 zwitterionic intermediates from phosphines and arynes followed by the interception with CO(2)to deliver the carboxylates in moderate to good yields instead of the anticipated benzooxaphosphol-3(1H)-ones.

}, keywords = {arynes, Carbon dioxide, multicomponent coupling, Phosphines, zwitterions}, issn = {1861-4728}, doi = {10.1002/asia.202000610, Early Access Date = JUN 2020}, author = {Bhattacharjee, Subrata and Raju, Anjali and Gaykar, Rahul N. and Gonnade, Rajesh G. and Roy, Tony and Biju, Akkattu T.} } @article {46997, title = {Rational synthesis of 10GDC electrolyte through a microwave irradiation GNP facile route for SOFC applications}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JAN}, pages = {3020-3028}, type = {Article}, abstract = {

The gadolinium-doped ceria Gd0.1Ce0.9O1.95 (10GDC) powder was synthesized using a microwave-synthesized glycine nitrate process (MS-GNP). The powder was subsequently pressed into circular pellets and sintered at various temperatures viz. 800, 900, 1000 and 1200 degrees C, in a microwave, high temperature furnace for 4 h so as to investigate the effect of the sintering temperature and sintering environment on the structural, morphological, thermal and electrical properties. The crystallite size and particle size as observed from X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) are found to be in the range of 15-28 nm and 12-20 nm, respectively. The electrochemical impedance spectroscopy (EIS) analysis was carried out to study the electrochemical properties during the cooling cycle from 400 degrees C to 800 degrees C. The highest value of ionic conductivity (3.55 x 10(-1) S cm(-1)) is observed at an operating temperature of 800 degrees C and O-2 gas partial pressure of 1 atm. Further, it is observed that the sintering temperature has a significant effect on the surface morphology and crystallite size, thereby improving the electrical performance of the samples. Though 20GDC was used as an electrolyte in the authors{\textquoteright} previous study, the novelty of the present work is the synthesis of 10GDC using a microwave-assisted glycine nitrate process and the size (thickness) of the prepared electrolyte for use in a Solid Oxide Fuel Cell (SOFC), which plays a major role in enhancing the structural, morphological and electrochemical properties with respect to different sintering temperatures as compared to the reported data. Hence, the prepared 10GDC electrolyte may be treated as one of the promising candidates as an electrolyte for SOFC for intermediate as well as high temperature applications.

}, doi = {10.1039/c9ra09476h}, author = {Shaikh, S. P. S. and Rode, V, Chandrashekhar} } @article {47017, title = {Recent advances in plant nanobionics and nanobiosensors for toxicology applications}, journal = {Current Nanoscience}, volume = {16}, year = {2020}, month = {JAN}, pages = {27-41}, type = {Review}, abstract = {

Emerging applications in the field of nanotechnology are able to solve a gamut of problems surrounding the applications of agroecosystems and food technology. Nano Engineered Material (NEM) based nanosensors are important tools for monitoring plant signaling pathways and metabolism that arc nondestructive, minimally invasive, and can provide real-time analysis of biotic and abiotic threats for better plant health. These sensors can measure chemical flux even at the single molecule level. Therefore, plant health could be monitored through nutrient management, disease assessment, plant hormones level, environmental pollution, etc. This review provides a comprehensive account of the current trends and practices for the proposed NEM related research and its (i) structural aspect, (ii) experimental design and performance as well as (iii) mechanisms of field application in agriculture and food system. This review also discusses the possibility of integration of data from NEM based nanosensors in current and emerging trends of precision agriculture, urban farming, and plant nanobionics to adopt a sustainable approach in agriculture,

}, keywords = {agro-ecosystems, engineered nanomaterials, nanobionics, Nanosensors, nanotechnology, nanotoxicology}, issn = {1573-4137}, doi = {10.2174/1573413715666190409101305}, author = {Ansari, Mohammad Hasan Dad and Lavhale, Santosh and Kalunke, Raviraj M. and Srivastava, Prabhakar L. and Pandit, Vaibhav and Gade, Subodh and Yadav, Sanjay and Laux, Peter and Luch, Andreas and Gemmati, Donato and Zamboni, Paolo and Singh, Ajay Vikram} } @article {46703, title = {Reduction of trap and polydispersity in mutually passivated quantum dot solar cells}, journal = {ACS Applied Energy Materials}, volume = {3}, year = {2020}, month = {SEP}, pages = {8903-8911}, type = {Article}, abstract = {

Control over surface passivation is a key to manage the optoelectronic properties in low-dimensional nanomaterials because of their high surface-to-volume ratios. Tunable band gap quantum dots (QDs) are a potential building block for the development of optoelectronic devices like solar cells, photodetectors, and light-emitting diodes. Long and insulating surface ligands of colloidally synthesized QDs are exchanged by short ligands to attain compact arrangement in thin films to facilitate the charge transport process. However, the ligand exchange process often resulted in reduced surface passivation, inhomogeneous QD fusion, and deterioration of energy band gap, which adversely impact their performance in solar cells. Here, we introduce a surface passivation strategy where the QDs are mutually passivated by the organic ligand 3-methyl mercapto propionate and inorganic halometallate ligands to develop a conducting QD ink. The mutually passivated QDs (MPQDs) show significant improvement in optoelectronic properties in maintaining the trap-free energy band gap and size monodispersity. The photovoltaic performance of MPQDs shows a 33\% average increase in power conversion efficiency (PCE) over the conventional halometallate passivation to attain 9.6\% PCE in MPQD solar cells. The improvements in photovoltaic parameters are corroborated by the reduction in density of the intermediate trap states and an increase in depletion width and diffusion length in MPQD-based solar cells.

}, keywords = {polydispersity, quantum dot, solar cells, surface passivation, trap states}, issn = {2574-0962}, doi = {10.1021/acsaem.0c01378}, author = {Sharma, Ashish and Mahajan, Chandan and Rath, Arup K.} } @article {46788, title = {Relativistic coupled-cluster study of BaF in search of CP violation}, journal = {Journal of Physics B-Atomic Molecular and Optical Physics}, volume = {53}, year = {2020}, month = {JUL}, pages = {135102}, type = {Article}, abstract = {

BaF is one of the potential candidates for the experimental search of the electric dipole moment of the electron (eEDM). The NL-eEDM collaboration is building a new experimental set up to measure the eEDM using the BaF molecule (The NL-eEDM collaboration, 2018 Eur. Phys. J. D 72: 197). To analyze the results of such an experiment, one would require the accurate value of the molecular P, T-odd interaction parameters that cannot be measured from any experiment. In this work, we report the precise value of the P, T-odd interaction parameters of the BaF molecule obtained from the four-component relativistic coupled-cluster calculations. We also calculate the hyperfine structure (HFS) constants of the same molecule to assess the reliability of the reported molecular parameters. The calculated HFS constants show good agreement with the available experimental values. Further, the systematic effects of electron-correlation along with the roles of inner-core electrons and the virtual energy functions in the calculation of the studied properties of BaF are investigated.

}, keywords = {electric dipole moment of the electron, electron-correlation, Relativistic effects}, issn = {0953-4075}, doi = {10.1088/1361-6455/ab84c8}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {46927, title = {Relativistic double-ionization equation-of-motion coupled-cluster method: application to low-lying doubly ionized states}, journal = {Journal of Chemical Physics}, volume = {152}, year = {2020}, month = {MAR}, pages = {104302}, type = {Article}, abstract = {

This article deals with the extension of the relativistic double-ionization equation-of-motion coupled-cluster (DI-EOMCC) method [H. Pathak et al. Phys. Rev. A 90, 010501(R) (2014)] for the molecular systems. The Dirac-Coulomb Hamiltonian with four-component spinors is considered to take care of the relativistic effects. The implemented method is employed to compute a few low-lying doubly ionized states of noble gas atoms (Ar, Kr, Xe, and Rn) and Cl-2, Br-2, HBr, and HI. Additionally, we presented results with two intermediate schemes in the four-component relativistic DI-EOMCC framework to understand the role of electron correlation. The computed double ionization spectra for the atomic systems are compared with the values from the non-relativistic DI-EOMCC method with spin-orbit coupling [Z. Wang et al. J. Chem. Phys. 142, 144109 (2015)] and the values from the National Institute of Science and Technology (NIST) database. Our atomic results are found to be in good agreement with the NIST values. Furthermore, the obtained results for the molecular systems agree well with the available experimental values.

}, issn = {0021-9606}, doi = {10.1063/1.5140988}, author = {Pathak, Himadri and Sasmal, Sudip and Talukdar, Kaushik and Nayak, Malaya K. and Veval, Nayana and Pal, Sourav} } @article {46857, title = {Removal of fluoride from aqueous solution by mesoporous silica nanoparticles functionalized with chitosan derived from mushroom}, journal = {Journal of Macromolecular Science Part A-Pure and Applied Chemistry}, volume = {57}, year = {2020}, month = {SEP }, pages = {619-627}, type = {Article}, abstract = {

In the present study, chitosan functionalized mesoporous silica nanoparticles have been synthesized. Chitosan derived from an edible mushroom, Agaricus bisporus was used during synthesis of chitosan functionalized silica nanoparticles. The functionalized silica nanoparticles were subjected to fluoride sorption using a batch method which subsequently showed removal efficiency of 95\% with maximum sorption capacity, 58.8 mg/g. The characterization of nanoparticles was carried out by SEM, EDAX, XRD and FTIR analysis respectively. EDAX analysis suggested that oxygen, 51.83\% and silica 37.24\% was main constituent of the functionalized nanomaterials. XRD yielded characteristic diffraction pattern corresponding to the lattice planes (100), (110), (112), (120), (200) and (220) respectively. Sorption data was used to study equilibrium isotherm namely Langmuir and Freundlich model. The adsorption capacity increased with temperature while kinetics studies revealed that the adsorption process followed a pseudo-second-order rate equation. The enthalpy change (Delta H) and entropy change (Delta S) was found to be -31.36 kJmol(-1) and -7.75 Jmol(-1) K-1, showing endothermic and spontaneous nature of the fluoride adsorption. Data suggested that the nature of adsorption belonged to chemisorptions. The overall results suggested that the synthesized nanoparticles showed strong and specific affinity for fluoride and could be excellent adsorbents for defluoridation.

}, keywords = {Adsorption, Chitosan, EDAX, Fluoride, SEM}, issn = {1060-1325}, doi = {10.1080/10601325.2020.1738896, Early Access Date = MAY 2020}, author = {Srivastava, Anushree and Kumari, Madhu and Ramanathan, Alagappan and Selvaraj, Kaliaperumal and Prasad, Bablu and Prasad, Kumar Suranjit} } @article {46797, title = {Renewing polyethylene: insertion copolymerization of sugar derived hydrophilic monomers with ethylene}, journal = {European Polymer Journal}, volume = {134}, year = {2020}, month = {JUL }, pages = {109775}, type = {Article}, abstract = {

Although highly desirable, insertion copolymerization of renewable resource derived functional olefins with ethylene has been rarely investigated. Herein, we report insertion copolymerization of challenging sugar derived isohexide mono-enes with ethylene in the presence of Pd-phosphinesulfonate acetonitrile catalyst (C1). Thus, copolymerization of ethylene with isomannide mono-ene (2a), isosorbide mono-ene (2b{\textquoteright}), isoidide mono-ene (2c) and methacryl-2,3,4,6-tetra-O-acetyl-D glucopyranoside (2d) afforded corresponding functionalized polyethylene (P2a-1 to P2d-1). High temperature proton NMR investigations revealed enchainment of 2a-2c in polyethylene backbone and the highest incorporation of 1.45\% was observed for 2c. The high temperature proton NMR results were further corroborated by solid state C-13 NMR and IR spectroscopy. Gel permeation chromatography analysis displayed weight average molecular weight in the range of 13.0-27.2 x 10(3) g/mol. The thus prepared copolymers revealed melting temperature in the range of 117-126 degrees C. Relatively reduced melting temperature compared to neat polyethylene may suggest an irregular arrangement of pendant functional group on polyethylene main chain.

}, keywords = {Hydrophilic polyethylene, insertion copolymerization, Isohexide mono-enes, Polyethylene, Sugar}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2020.109775}, author = {Rajput, Bhausaheb S. and Pawal, Sandip B. and Bodkhe, V. Dnyaneshwar and Rao, I. Nagamalleswara and Sainath, Annadanam V. Sesha and Chikkali, Samir H.} } @article {47453, title = {Reply to {\textquotedblleft}comment on {\textquoteleft}arresting an unusual amide tautomer using divalent cations{\textquoteright}{\textquotedblright}}, journal = {Journal of Physical Chemistry B}, volume = {125}, year = {2020}, month = {DEC}, pages = {479{\textendash}483}, type = {Article}, abstract = {

In our publication, we assigned the blue-shifted shoulder of\ N-methylacetamide (NMA) in the infrared (IR) spectrum (\~{}1645 cm{\textendash}1) to an iminolate tautomer stabilized in the presence of divalent metal cations (e.g., 5 M Ca2+).(1)\ Cremer and co-workers comment that this shoulder arises from the dehydration of the amide oxygen upon interaction with the metal cations.(2,3)\ Their assignment is based on three interesting experimental observations: (1) the IR spectrum of\ 15N-isotope-labeled NMA does not show any considerable red-shift compared to that of NMA; (2) a new peak appears for NMA at 1680 cm{\textendash}1\ in the presence of 1 M DCl, which shows a 17 cm{\textendash}1\ red-shift for\ 15N-labeled NMA; and (3) the IR spectrum of acetone C=O stretch also demonstrates a blue-shifted shoulder in the presence of a high concentration of CaCl2.

}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.0c06005}, author = {Kashid, Somnath M. and Singh, Reman K. and Kwon, Hyejin and Seol, Jin Gyu and Kim, Yung Sam and Mukherjee, Arnab and Bagchi, Sayan} } @article {46773, title = {Residue-based propensity of aggregation in the Tau amyloidogenic hexapeptides AcPHF6*and AcPHF6}, journal = {RSC Advances}, volume = {10}, year = {2020}, month = {JUL}, pages = {27331-27335}, type = {Article}, abstract = {

In Alzheimer{\textquoteright}s disease and related tauopathies, the aggregation of microtubule-associated protein, Tau, into fibrils occursviathe interaction of two hexapeptide motifs PHF*(275)VQIINK(280)and PHF(306)VQIVYK(311)as beta-sheets. To understand the role of the constituent amino acids of PHF and PHF* in the aggregation, a set of 12 alanine mutant peptides was synthesized by replacing each amino acid in PHF and PHF* with alanine and they were characterized by nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD), transmission electron microscopy (TEM) and ThS/ANS fluorescence assay. Our studies show that while the aggregation was suppressed in most of the alanine mutant peptides, replacement of glutamine by alanine in both PHF and PHF* enhanced the fibrillization.

}, doi = {10.1039/d0ra03809a}, author = {Dangi, Abha and Balmik, Abhishek Ankur and Ghorpade, Archana Kisan and Gorantla, Nalini Vijay and Sonawane, Shweta Kishor and Chinnathambi, Subashchandrabose and Marelli, Udaya Kiran} } @article {46763, title = {Review of porous adsorbents for the separation of nitrogen from natural gas}, journal = {Industrial \& Engineering Chemistry Research}, volume = {59}, year = {2020}, month = {JUL}, pages = {13355-13369}, type = {Review}, abstract = {

Natural gas is one of the critical fossil fuel sources in the world to fulfill current energy demand in the global market. Methane is the primary component in natural gas and its concentration is dependent on the source; a variety of impurities, such as nitrogen, carbon dioxide, oxygen, helium, hydrogen sulfide, water, and heavier hydrocarbons can be present, which reduces the overall fuel quality. Purification of natural gas is important in order to meet the U.S. pipeline and minimum heating value specifications. The separation of nitrogen from methane is challenging because of their similar molecular size (i.e., the two gases differ in kinetic diameter by only 0.16 angstrom). This Review discusses different methods for separating nitrogen from methane. Of these methods, pressure swing adsorption is one of the most effective techniques for separating nitrogen from natural gas using porous adsorbents, and encouraging results have been demonstrated in the past few decades. Many types of porous adsorbents are discussed here, including carbon molecular sieves, activated carbons, zeolites, titanosilicates, and metal-organic frameworks. Future trends and materials are discussed to put into perspective the new opportunities in this research area.

}, issn = {0888-5885}, doi = {10.1021/acs.iecr.0c02730}, author = {Nandanwar, Sachin U. and Corbin, David R. and Shiflett, Mark B.} } @article {47020, title = {Rheological quantification of the extent of dissolution of ultrahigh molecular weight polyethylene in melt-compounded blends with high density polyethylene}, journal = {Journal of Rheology}, volume = {64}, year = {2020}, month = {JAN}, pages = {1-12}, type = {Article}, abstract = {

Melt compounding of ultrahigh molecular weight polyethylene (UHMWPE) with high density polyethylene (HDPE) promises to be an alternative route to prepare bimodal polyethylene grades. However, complete dissolution of UHMWPE in HDPE cannot be guaranteed during melt compounding. Indeed, in an earlier work [K. Chaudhuri et al., Polym. Eng. Sci. 59, 821-829 (2019)], it was shown that a fully entangled UHMWPE did not mix well with commercial HDPE. However, a disentangled UHMWPE (dPE) could be melt-mixed in the same HDPE as evidenced qualitatively by rheological measurements. The present work is focused on quantifying the extent of dissolution of dPE in HDPE. The proposed method involves fitting rheological models for linear viscoelasticity of entangled bimodal blends of polydisperse polymers to dynamic oscillatory shear data and extracting information on the extent of dissolved species. The time-dependent diffusion model of des Cloizeaux is used along with the theory of double reptation (DR) to describe the dynamics of polydisperse homopolymers and also to extract the molecular weight distribution of the UHMWPE sample. A quadratic mixing rule, consistent with the DR model, is used to describe the dynamics of bimodal blends. Melt-mixed dPE/HDPE blends were prepared and characterized for their linear viscoelastic response by frequency sweep tests. The blends showed complex behavior with multiple crossover points, especially for the higher content of dPE. The bimodal model was then fit to the experimental frequency sweep data to determine the only unknown parameter, namely, the extent of dissolved dPE. It was found that a considerable fraction of dPE is dissolved in HDPE during melt compounding.

}, keywords = {blends, Disentangled UHMWPE, double reptation, HDPE, Mathematical modeling}, issn = {0148-6055}, doi = {10.1122/1.5113705}, author = {Chaudhuri, Krishnaroop and Lele, Ashish K.} } @article {46777, title = {Role of B site ions in bifunctional oxygen electrocatalysis: a structure-property correlation study on doped Ca(2)Fe(2)O(5)brownmillerites}, journal = {Physical Chemistry Chemical Physics}, volume = {22}, year = {2020}, month = {JUL }, pages = {15520-15527}, type = {Article}, abstract = {

The role of B site doping with transition metals in brownmillerites, a perovskite related family of compounds, in bifunctional oxygen electrocatalysis,viz., simultaneous reduction and evolution reactions, is analysed. Ca2Fe1.9M0.1O5(M = Mn, Co, Ni, and Cu) is synthesised and structurally characterised by powder XRD and Rietveld refinement. Valence states of the surface B site ions are identified by X-ray photoelectron spectroscopy. Bifunctional oxygen electrochemistry is studied with the RDE and RRDE techniques and correlated with the structural and electronic parameters like oxygen non-stoichiometry and B site catalytic activity. Since the widely accepted electronic descriptors like e(g)filling may not be sufficient for explaining the bifunctional activity, B site electron donating capability as well as the extent of oxygen vacancies enhancing O(2)adsorption is also considered. Such structural parameters are also found to influence both the ORR and OER and based on this, Ni doping is proposed as advantageous for the bifunctional activity.

}, issn = {1463-9076}, doi = {10.1039/d0cp02391d}, author = {Thundiyil, Shibin and Vinod, C. P. and Kurungot, Sreekumar and Devi, R. Nandini} } @article {46943, title = {Role of cholesterol-mediated effects in GPCR heterodimers}, journal = {Chemistry and Physics of Lipids}, volume = {227}, year = {2020}, month = {MAR}, pages = {104852}, type = {Article}, abstract = {

G protein-coupled receptors (GPCRs) are transmembrane receptors that mediate a large number of cellular responses. The organization of GPCRs into dimers and higher-order oligomers is known to allow a larger repertoire of downstream signaling events. In this context, a crosstalk between the adenosine and dopamine receptors has been reported, indicating the presence of heterodimers that are functionally relevant. In this paper, we explored the effect of membrane cholesterol on the adenosine(2A) (A(2A)) and dopamine D-3 (D-3) receptors using coarse-grain molecular dynamics simulations. We analyzed cholesterol interaction sites on the A(2A) receptor and were able to reproduce the sites indicated by crystallography and previous atomistic simulations. We predict novel cholesterol interaction sites on the D-3 receptor that could be important in the reported cholesterol sensitivity in receptor function. Further, we analyzed the formation of heterodimers between the two receptors. Our results suggest that membrane cholesterol modulates the relative population of several co-existing heterodimer conformations. Both direct receptor-cholesterol interaction and indirect membrane effects contribute toward the modulation of heterodimer conformations. These results constitute one of the first examples of modulation of GPCR hetero-dimerization by membrane cholesterol, and could prove to be useful in designing better therapeutic strategies.

}, keywords = {Adenosine(2A) receptor, Cholesterol, Dopamine D-3 receptor, G protein-coupled receptors, Heterodimer, MARTINI coarse-grain simulation}, issn = {0009-3084}, doi = {10.1016/j.chemphyslip.2019.104852}, author = {Prasanna, Xavier and Mohole, Madhura and Chattopadhyay, Amitabha and Sengupta, Durba} } @article {46916, title = {Role of dietary fatty acids in microglial polarization in Alzheimer{\textquoteright}s disease}, volume = {17}, year = {2020}, month = {MAR}, pages = {93}, type = {Review}, abstract = {

Microglial polarization is an utmost important phenomenon in Alzheimer{\textquoteright}s disease that influences the brain environment. Polarization depends upon the types of responses that cells undergo, and it is characterized by receptors present on the cell surface and the secreted cytokines to the most. The expression of receptors on the surface is majorly influenced by internal and external factors such as dietary lipids. Types of fatty acids consumed through diet influence the brain environment and glial cell phenotype and types of receptors on microglia. Reports suggest that dietary habits influence microglial polarization and the switching of microglial phenotype is very important in neurodegenerative diseases. Omega-3 fatty acids have more influence on the brain, and they are found to regulate the inflammatory stage of microglia by fine-tuning the number of receptors expressed on microglia cells. In Alzheimer{\textquoteright}s disease, one of the pathological proteins involved is Tau protein, and microtubule-associated protein upon abnormal phosphorylation detaches from the microtubule and forms insoluble aggregates. Aggregated proteins have a tendency to propagate within the neurons and also become one of the causes of neuroinflammation. We hypothesize that tuning microglia towards anti-inflammatory phenotype would reduce the propagation of Tau in Alzheimer{\textquoteright}s disease.

}, keywords = {Fatty acids, Microglial polarization, Omega-3 fatty acids, Tau inflammation, Tau phagocytosis, Tau spreading, Tauopathy}, doi = {10.1186/s12974-020-01742-3}, author = {Desale, Smita Eknath and Chinnathambi, Subashchandrabose} } @article {46932, title = {Role of electron correlation in the P, T-odd effects of CdH: a relativistic coupled-cluster investigation}, journal = {Physical Review A}, volume = {101}, year = {2020}, month = {MAR }, pages = {032505}, type = {Article}, abstract = {

We investigate the parity (P) and time-reversal (T) symmetry violating effects in the CdH molecule and perform the relativistic coupled-cluster calculation of the molecular parameters-E-eff, W-s, and W-M-related to the electric dipole moment of electron (eEDM) interaction, the scalar-pseudoscalar (S-PS) nucleus-electron neutral current coupling, and the nuclear magnetic quadrupole moment (MQM) interaction with electrons, respectively. We also compute the molecular dipole moment and the magnetic hyperfine structure coupling constant of CdH. The values of E-eff, W-s, and W-M obtained by us in the said molecule are 12.2 GV/cm, 14.0 kHz, and 0.82 x 10(33) Hz/e cm(2), respectively, within an uncertainty of 10\%. Furthermore, we study the trend of electron-correlation in the computed properties of CdH and that of the P, T-odd parameters in the group-12 monohydrides (i.e., ZnH, CdH, and HgH).

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.101.032505}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {47317, title = {Role of exposed crystal facets in the atmospheric pressure CO hydrogenation on Co3O4}, journal = {Nano-Structures \& Nano-Objects}, volume = {23}, year = {2020}, month = {JUL}, type = {Article}, abstract = {

Co3O4 nanostructures with different exposed planes are studied for atmospheric pressure CO hydrogenation. Existence of different facets is characterized by HR-TEM and found Co3O4 - NSP (nanospheres) expose (112) facet, NB (nanobelts) exhibit (110) plane and (100) is the dominant surface facet in NC (nanocubes). Different catalytic activity is demonstrated by the specific facet of Co3O4 catalysts. CO hydrogenation is facet dependent and the catalytic activity follows the order of Co3O4-NB \> Co3O4-NC \> Co3O4-NSP.

}, doi = {10.1016/j.nanoso.2020.100504}, author = {Jain, Preeti and Gupta, Sharad and Vinod, C. P.} } @inbook {47305, title = {Role of jasmonate in modulation of mycorrhizae-induced resistance against fungal pathogens}, booktitle = {Methods in Molecular Biology}, volume = {2085}, year = {2020}, pages = {109-115}, publisher = {Springer}, organization = {Springer}, abstract = {

Symbiotic association of plants with arbuscular mycorrhizal (AM) fungi brings about changes in levels of the phytohormone jasmonate (JA) in root and shoot tissues of a plant. The enhanced JA levels not only play a role in controlling the extent of AM colonization but are also involved in the expression of mycorrhizal-induced resistance (MIR) against pathogens. We describe a method used to study the levels of a volatile jasmonate derivative, methyl jasmonate (MeJA), in tomato plants colonized by AM fungi and in response to subsequent attack by the foliar pathogen Alternaria alternata.

}, doi = {10.1007/978-1-0716-0142-6_8}, author = {Nair, Aswathy and Thulasiram, H. V. and Bhargava, Sujata} } @article {46847, title = {Role of microglia in regulating cholesterol and tau pathology in alzheimer{\textquoteright}s disease}, journal = {Cellular and Molecular Neurobiology}, year = {2020}, month = {MAY}, type = {Review; Early Access 2020}, abstract = {

Cholesterol, a principal constituent of the cell membrane, plays a crucial role in the brain by regulating the synaptic transmission, neuronal signaling, as well as neurodegenerative diseases. Defects in the cholesterol trafficking are associated with enhanced generation of hyperphosphorylated Tau and Amyloid-beta protein. Tau, a major microtubule-associated protein in the brain, is the key regulator of the mature neuron. Abnormally hyperphosphorylated Tau hampers the major functions related to microtubule assembly by promoting neurofibrillary tangles of paired helical filaments, twisted ribbons, and straight filaments. The observed pathological changes due to impaired cholesterol and Tau protein accumulation cause Alzheimer{\textquoteright}s disease. Thus, in order to regulate the pathogenesis of Alzheimer{\textquoteright}s disease, regulation of cholesterol metabolism, as well as Tau phosphorylation, is essential. The current review provides an overview of (1) cholesterol synthesis in the brain, neurons, astrocytes, and microglia; (2) the mechanism involved in modulating cholesterol concentration between the astrocytes and brain; (3) major mechanisms involved in the hyperphosphorylation of Tau and amyloid-beta protein; and (4) microglial involvement in its regulation. Thus, the answering key questions will provide an in-depth information on microglia involvement in managing the pathogenesis of cholesterol-modulated hyperphosphorylated Tau protein.

}, keywords = {Alzheimer{\textquoteright}s disease, Amyloid-beta protein, Cholesterol, microglia, Tau hyperphosphorylation}, issn = {0272-4340}, doi = {10.1007/s10571-020-00883-6}, author = {Nanjundaiah, Shwetha and Chidambaram, Hariharakrishnan and Chandrashekar, Madhura and Chinnathambi, Subashchandrabose} } @article {46881, title = {Room temperature processed in-situ carbon-coated vanadium carbide (VC@C) as a high capacity robust Li/Na battery anode material}, journal = {Carbon}, volume = {161}, year = {2020}, month = {MAY}, pages = {108-116}, type = {Article}, abstract = {

3D carbide systems with their robust physical and mechanical properties have always attracted multiple application interests. In this report, we have synthesized a three-dimensional in-situ carbon coated cubic carbide, Vanadium Carbide (VC@C), by a very simple, scalable and cost-effective room temperature mechano-chemical ball-milling procedure and researched its promise as effective anode material for Li and Na ion batteries. We have demonstrated that VC@C shows an impressive initial discharge/lithiation capacity of 1165 mAh g(-1) with a high reversible capacity of 640 mAh g(-1) after 100 charge-discharge cycles at an applied current density of 0.1 A g(-1). We have also found that this material renders a very promising rate performance with significantly low capacity drop after exposing it to variable current densities ranging from 0.05 A g(-1) to 2 A g(-1) with an excellent stability up to 1000 cycles owing to its structural robustness, as verified by post-cycling characterizations. A Li-ion full cell study using LiCoO2 as cathode also showed excellent promise in terms of practical application demonstrating a reversible capacity of 95 mAh g(-1) after 100 cycles. Even for Na insertion/de-insertion VC@C shows a clear promise in terms of capacity, cyclic stability and rate performance. (C) 2020 Elsevier Ltd. All rights reserved.

}, keywords = {3D carbide, In-situ synthesis, Li-ion battery, Post cycling characterization, Room temperature ball milling, Williamson-Hall analysis}, issn = {0008-6223}, doi = {10.1016/j.carbon.2020.01.057}, author = {Mahajan, Mani and Roy, Kingshuk and Parmar, Swati and Singla, Gourav and Pandey, O. P. and Singh, K. and Vaidhyanathan, Ramanathan and Ogale, Satishchandra} } @article {47426, title = {Raman spectroscopy-based sensitive, fast and reversible vapour phase detection of explosives adsorbed on metal-organic frameworks UiO-67}, journal = {New Journal of Chemistry}, volume = {45}, year = {2021}, month = {APR}, pages = {7145-7153}, type = {Article}, abstract = {

In this work, we report highly sensitive, selective, rapid, and reversible detection of explosive molecules in the vapour phase, adsorbed on metal-organic frameworks (MOFs) under ambient laboratory conditions. The sensing is based on the quenching of the Raman intensity of a zirconium-based MOF, Zr6O4(OH)(4)(dcppy)(6) (MOF 1, UiO-67-dcppy; dcppy is 2-phenylpyridine-5,4{\textquoteright}-dicarboxylate), where 50\% of the signal quenches swiftly within similar to 5 s of its exposure to trinitrophenol (TNP) vapours, while 90\% of the Raman signal was quenched in 30 s. The high surface area of porous MOFs provides increased adsorption of various nitro analytes. The quenching of Raman peaks resulted from the pi-pi interactions of the analytes with the benzene ring of the MOF. The sensors have also been proven to be reversible and stable by mild heat treatment (80 degrees C for 5 min). These notable results using Raman spectroscopy point to a new and important approach towards explosive sensing using metal-organic frameworks considering their vast versatility. This work emphasizes the importance of a non-invasive and non-destructive technique that can be used to develop handheld vapour phase explosive detectors.

}, issn = {1144-0546}, doi = {10.1039/d0nj04915h, Early Access Date = MAR 2021}, author = {Sen Bishwas, Mousumi and Malik, Monika and Poddar, Pankaj} } @article {47346, title = {Rapid and accurate nucleobase detection using FnCas9 and its application in COVID-19 diagnosis}, journal = {Biosensors \& Bioelectronics}, volume = {183}, year = {2021}, month = {JUL }, pages = {113207}, type = {Article}, abstract = {

Rapid detection of DNA/RNA pathogenic sequences or variants through point-of-care diagnostics is valuable for accelerated clinical prognosis, as witnessed during the recent COVID-19 outbreak. Traditional methods relying on qPCR or sequencing are tough to implement with limited resources, necessitating the development of accurate and robust alternative strategies. Here, we report FnCas9 Editor Linked Uniform Detection Assay (FELUDA) that utilizes a direct Cas9 based enzymatic readout for detecting nucleobase and nucleotide sequences without transcleavage of reporter molecules. We also demonstrate that FELUDA is 100\% accurate in detecting single nucleotide variants (SNVs), including heterozygous carriers, and present a simple web-tool JATAYU to aid end-users. FELUDA is semi-quantitative, can adapt to multiple signal detection platforms, and deploy for versatile applications such as molecular diagnosis during infectious disease outbreaks like COVID-19. Employing a lateral flow readout, FELUDA shows 100\% sensitivity and 97\% specificity across all ranges of viral loads in clinical samples within 1hr. In combination with RT-RPA and a smartphone application True Outcome Predicted via Strip Evaluation (TOPSE), we present a prototype for FELUDA for CoV-2 detection closer to home.

}, keywords = {CRISPRDx, FELUDA, FnCas9, LFA, SARS-CoV2, SNV detection}, issn = {0956-5663}, doi = {10.1016/j.bios.2021.113207}, author = {Azhar, Mohd and Phutela, Rhythm and Kumar, Manoj and Ansari, Asgar Hussain and Rauthan, Riya and Gulati, Sneha and Sharma, Namrata and Sinha, Dipanjali and Sharma, Saumya and Singh, Sunaina and Acharya, Sundaram and Sarkar, Sajal and Paul, Deepanjan and Kathpalia, Poorti and Aich, Meghali and Sehgal, Paras and Ranjan, Gyan and Bhoyar, Rahul C. and Singhal, Khushboo and Lad, Harsha and Patra, Pradeep Kumar and Makharia, Govind and Chandak, Giriraj Ratan and Pesala, Bala and Chakraborty, Debojyoti and Maiti, Souvik and Indian CoV2 Genomics Genetic Epide} } @article {47401, title = {Rapid identification and tracking of SARS-CoV-2 variants of concern}, journal = {Lancet}, volume = {397}, year = {2021}, month = {APR}, pages = {1346-1347}, type = {Letter}, issn = {0140-6736}, doi = {10.1016/S0140-6736(21)00470-0}, author = {Chakraborty, Debojyoti and Agrawal, Anurag and Maiti, Souvik} } @article {47702, title = {Rationally designed, efficient, and earth-abundant Ni-Fe cocatalysts for solar hydrogen generation}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {9}, year = {2021}, month = {OCT }, pages = {13915-13925}, type = {Article}, abstract = {Developing highly efficient and affordable catalysts for solar hydrogen (H-2) generation is crucial, and employing a cocatalyst from earth-abundant elements has a critical role to play. In this context, different compositions of earth-abundant Ni-Fe alloy (1:1, 1:3, and 3:1) have been prepared by hydrothermal method; subsequently, 1 wt \% of these Ni-Fe cocatalysts were integrated with TiO2-P25 and thoroughly characterized. The resultant catalysts have been evaluated for solar H-2 production, in powder and thin film forms, under one sun condition and in direct sunlight. Interestingly, all the catalysts in the thin film form exhibit superior hydrogen yield (HY), up to 27 times higher activity than its powder counterpart. Among the photocatalysts, Ni-Fe/TiO2 (3:1 = Ni/Fe; NFT31) composition exhibits the best HY in thin film (8.27 mmol.h(-1).g(-1)) and exceeds all other compositions of catalyst. It is also to be reported that HY measured for the powder form with 1 mg shows 3-17 times higher activity than that measured with 25 mg. This is mainly attributed to effective solar light absorption with a smaller amount of photocatalyst either spread over large area in a thin film form or well-dispersed in suspension forms. Furthermore, the enhanced activity obtained with Ni-Fe/TiO2 photocatalysts is also ascribed to strong electronic integration of Ni-Fe cocatalyst with TiO2 and higher performance obtained with a thin film is attributed to increased charge carrier generation and subsequent charge separation and effective utilization. A decrease in work function of TiO2 by 0.6 eV was observed after its integration with cocatalyst in NFT31.}, keywords = {Cocatalyst, Hydrogen, Ni-Fe alloy, solar energy, TiO2, water splitting}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.1c05158}, author = {Tudu, Bijoy and Nalajala, Naresh and Reddy, Kasala Prabhakar and Saikia, Pranjal and Gopinath, Chinnakonda S.} } @article {47464, title = {Reactions of 2,3-dibromonaphthalene-1,4-dione and pyridyl amines: X-ray structures, DFT investigations, and selective detection of the Hg2+ and Ni2+ ions}, journal = {Engineered Science}, volume = {14}, year = {2021}, month = {FEB}, pages = {78-93}, type = {Article}, abstract = {

In this work, the products formed by the reaction between 2,3-dibromonaphthalene-1,4-dione with (pyridine-2-yl)methanamine and (pyridine-4-yl)methanamine are discussed in detial. The products 2-amino-3-bromonaphthalene-1,4-dione (A) and 2-aminonaphthalene-1,4-dione (B(1)) obtained are characterized through\ 1H and\ 13C-NMR, FTIR, mass spectrometry, single-crystal X-ray diffraction experiments, which are in conjunction with wB97X based density functional theory.\ compound\ A\ can effectively and selectively detect Hg2+\ and Ni2+\ ions, and proposes a potential mechanism of action.

}, issn = {2576-9898}, doi = {10.30919/es8d427}, author = {Aggrwal, Gunjan and Salunke-Gawali, Sunita and Gejji, Shridhar P. and Nikalje, Milind and Chakravarty, Debamitra and Verma, Prakash L. and Gosavi-Mirkute, Prajkta and Harihar, Shital and Jadhav , Mahesh and Puranik, Vedavati G.} } @article {47647, title = {Reactivities of silaimines with boranes: from cooperative B-H bond activation to donor stabilized silyl cation}, journal = {Organometallics}, volume = {40}, year = {2021}, month = {JUL}, pages = {2133-2138}, type = {Article}, abstract = {The recently published silylene with a tris(trimethylsilyl) group, PhC(NtBu)(2)SiSi(SiMe3)(3) (1), was reacted with the organic azides such as SiMe3N3 and AdN(3) to form the respective hypersilylsilaimines, PhC(NtBu)(2)Si(=NR)Si(SiMe3)(3) 2 (R = SiMe3) and 3 (R = Ad). The B-H bond of HBpin or HBcat was split across the Si=N bond upon reaction with 2, which generated 4 and 5, respectively. However, we could not obtain the crystals of 4 and 5 appropriate for X-ray diffraction. Subsequently, we performed the analogous reactions with a related silaimine PhC(NtBu)(2)Si(=NSiMe3)N(SiMe3) 2 (2{\textquoteright}) and isolated similar B-H bond activated products 6 and 7. The reaction of 2{\textquoteright} with HBCl2 resulted in donor stabilized silyl cations (8 and 9) supported by an amidinate ligand.}, issn = {0276-7333}, doi = {10.1021/acs.organomet.1c00273}, author = {Bisai, Milan Kumar and Sharma, Vishal and Gonnade, Rajesh G. and Sen, Sakya S.} } @article {48256, title = {Reactivity, bonding and structural elucidation of pendant methyl-pyridinato beta-diketiminate ligand moiety}, journal = {Acta Crystallographica A-Foundation and Advances}, volume = {77}, year = {2021}, month = {AUG}, pages = {C938}, type = {Meeting Abstract}, keywords = {Flexibility of beta-diketiminate ligand, six-membered dialane heterocycle: an analogue of cyclohexane, structural diversity, Transmetallation among two p-block elements}, issn = {2053-2733}, author = {Pahar, S. and Sen, S. S.} } @article {47618, title = {Reactivity of (TMS)(2)N(eta(1)-Cp*)Si=Si(eta(1)-Cp*)N(TMS)(2) toward the Halides of Groups 13-15}, journal = {Organometallics}, volume = {40}, year = {2021}, month = {JUN }, pages = {1874-1883}, type = {Article}, abstract = {In this paper, we have demonstrated the unique reactivity of a previously reported disilene [(TMS)(2)N(eta(1)-Me5C5)Si=Si(eta(1)-Me5C5)N(TMS)(2)] (1) with the halides of groups 13-15, which resulted in the formation of silicon-E (E = B, Al, Ge, P) bonds. Treatment of 1 with Lewis acidic BCl3 led to the formation of a cationic boron species [Cp*BSi(Cl)(2)N(TMS)(2))][BCl3SiCl3] (2). In contrast, the reaction of 1 with BCy2Cl afforded an oxidative addition product [(TMS)(2)N(eta(1)-Me5C5)Si(BCy2)(Cl)] (3) via the insertion of a Si(II) atom into the B-Cl bond. Extending the reaction with its higher congener led to classical Lewis acid-base adducts, (TMS)(2)N(eta(1)-Me5C5)Si -> AlCl3 (4) and (TMS)(2)N(eta(1)-Me5C5)Si -> AlBr3 (5), respectively. The reaction of GeCl2 with 1 proceeded in a completely different manner and resulted in a hybrid dendrimeric compound [HGe(Si(Cl)(2)N(TMS)(2))(3)] (6), whereas, with SnCl2, it led to Cp*SnCl (7). Lastly, the reaction of Ph2PCl followed the same pattern like Cy2BCl and led to the formation of an oxidative addition product [(TMS)(2)N(eta(1)-Me5C5)Si(PPh2)(Cl)] (9) with a Si-P bond.}, issn = {0276-7333}, doi = {10.1021/acs.organomet.1c00203}, author = {Sen, Nilanjana and Parvin, Nasrina and Tothadi, Srinu and Khan, Shabana} } @article {47621, title = {Readily available lithium compounds as catalysts for the hydroboration of carbodiimides and esters}, journal = {Journal of Organometallic Chemistry}, volume = {949}, year = {2021}, month = {SEP 15}, pages = {121924}, type = {Article}, abstract = {Selective and efficient hydroboration of esters and carbodiimides to alcohols and amines by two welldefined and readily accessible lithium complexes, 2,6-di-tert-butyl phenolate lithium (1a ) and 1,1{\textquoteright}-dilithioferrocene (1b ) are described. A range of aliphatic, aromatic, and cyclic esters with various functional groups were selectively converted into the corresponding boronate esters. Similarly, the single hydroboration of carbodiimides with aliphatic and aromatic substituents on the nitrogen atoms was studied. A possible mechanistic pathway of the hydroboration of carbodiimides with HBpin has been proposed using NMR studies and DFT calculations. These reactions are convenient alternatives to stoichiometric hydride reduction or hydrogenation. The employing of lithium complexes is also significant, because of the need to find cheap and green alternatives to noble metal complexes. (C) 2021 Elsevier B.V. All rights reserved.}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2021.121924}, author = {Bisai, Milan Kumar and Gour, Kritika and Das, Tamal and Vanka, Kumar and Sen, Sakya S.} } @article {47821, title = {Recent advances in liquid organic hydrogen carriers: an alcohol-based hydrogen economy}, journal = {ACS Catalysis}, volume = {11}, year = {2021}, month = {NOV}, pages = {14712-14726}, type = {Article}, abstract = {Energy storage and the use of abundantly available feedstock without contributing to the carbon footprint are two significant global challenges. In this regard, the development of high-performance, low-cost, sustainable, and environmentally friendly energy storage and production systems is crucial to fulfill the growing energy demands of the current society. The use of hydrogen will diversify energy sources as it significantly reduces greenhouse gas emissions and environmental pollution during energy conversion. Although the hydrogen economy is quite beneficial, hydrogen storage is still very challenging, and the existing methods suffer from a lot of problems and drawbacks. The conventional liquefaction and compression hydrogen storage technologies are associated with several challenges, including low storage density, boil-off losses, relatively high costs, and safety and transportation concerns. In recent years, liquid organic hydrogen carrier (LOHC) systems have attained a lot of importance as a substitute for the traditional storage methods. Hydrogen storage and transport using LOHCs are based on two-step cycles, such as (i) loading/storage of hydrogen by catalytic hydrogenation of H2-lean compounds and (ii) unloading/releasing hydrogen by dehydrogenating the resulting H2-rich liquids. Since alcohols are widely accessible from various industrial processes or even from biomass-derived precursors, the catalytic acceptorless dehydrogenation of alcohols is an attractive approach for future hydrogen storage applications. Hence, the catalytic dehydrogenation-hydrogenation of alcohols can be used for the development of alcohol-based LOHC systems which are economical, safe, and easy to handle. Further, they are similar to crude oils under ambient conditions and thus are suitable for use in the current energy infrastructure. This Review covers several essential aspects of these developing efficient and abundantly available LOHC systems for efficient hydrogen storage and transport applications. Additionally, reversible LOHC systems based on the catalytic dehydrogenation-hydrogenation of alcohols and their corresponding carbonyl compounds have been discussed.}, doi = {10.1021/acscatal.1c03283}, url = {https://doi.org/10.1021/acscatal.1c03283}, author = {Yadav, Vinita and Sivakumar, Ganesan and Gupta, Virendrakumar and Balaraman, Ekambaram} } @article {47498, title = {Red fluorescent ultra-small gold nanoclusters functionalized with signal molecules to probe specificity in quorum sensing receptors in gram-negative bacteria}, journal = {Archives of Microbiology}, year = {2021}, month = {JUN}, type = {Article; Early Access}, abstract = {Ultra-small (size < 2 nm) gold nanoclusters (AuNCs) are used as fluorescent probes which have excellent applications in bioimaging and sensing due to their emission in visible and NIR spectral region. Here, this property is exploited for understanding the quorum sensing phenomenon in bacteria which is regulated by signal molecules which are specific to various species. AuNCs are then functionalized with the signal molecules, Acyl Homoserine Lactones (AHL) of varying carbon chain length, C-6, C-8, and C-12 without 3rd C modification, to sense different strains of gram-negative bacteria i.e., Escherichia coli, Cronobacter sakazakii and Pseudomonas aeruginosa. In the concentration employed, selectivity to a limited extent is observed between the three Gram-negative bacteria tested. E. coli showed emission with all the AHL conjugates and P. aeruginosa did not interact with any of the three conjugates, whereas C. sakazakii showed specificity to C-8AHL. This is probably due to selectivity for cognate AHL molecules of appropriate concentrations.}, keywords = {acyl homoserine lactone, fluorescence imaging, Gold nanoclusters, quorum sensing, Receptors, selectivity}, issn = {0302-8933}, doi = {10.1007/s00203-021-02338-y, Early Access Date = JUN 2021}, author = {Chahande, Anurag M. and Lathigara, Disha and Prabhune, Asmita A. and Devi, R. Nandini} } @article {47637, title = {Reduction of hydroxyl traps and improved coupling for efficient and stable quantum dot solar cells}, journal = {ACS Applied Materials \& Interfaces}, volume = {13}, year = {2021}, month = {OCT }, pages = {46549-46557}, type = {Article}, abstract = {Progress in quantum dot (QD)-based solar cells has been underpinned by the improvements in surface passivation and advancements in device engineering. Acute control over the surface properties is crucial to restrict the formation of in-gap trap states and improve the QD coupling in achieving conducting QD films. In this report, we demonstrate a solution-phase hybrid passivation strategy, which is beneficial in removing detrimental hydroxyl traps and improving the coupling between QDs by reducing the interdot distance. Advancement in surface passivation is translated to the long carrier lifetime, higher carrier mobility, and superior protection toward degradations in QD solids. The performance of solar cell devices is increased by 26\% to reach an efficiency of 10.6\%, compared to the state-of-the-art lead halide passivated solar cells. The improvement in solar cell performance is supported by the reduction of trap states and an 80 nm increase in thickness of the light-absorbing QD layer.}, keywords = {ligand, mobility, quantum dot, solar cell, surface passivation}, issn = {1944-8244}, doi = {10.1021/acsami.1c11214}, author = {Mandal, Debranjan and Dambhare, V. Neha and Rath, Arup K.} } @article {47361, title = {Refining plant oils and sugars to platform chemicals, monomers, and polymers}, journal = {Green Chemistry}, volume = {23}, year = {2021}, month = {MAY}, pages = {4255-4295}, type = {Review}, abstract = {

As fossil resources continue to dwindle and environmental concerns are magnified, finding sustainable alternatives is the only way to mitigate resource availability and derisk the planet. The principles of Green Chemistry may provide guidance in this case, and renewable resources can be converted into useful platform chemicals, monomers, and polymers. This critical review examines the possibility of utilizing renewable plant oils and sugars to produce feedstock chemicals, monomers, and polymers. Among the seven isomerizing functionalization reactions of plant oils, isomerizing alkoxycarbonylation displays the highest terminal selectivity. Despite the low reactivity of sugar-derived isohexides, new strategies have been deployed to convert isohexides into difunctional monomers and polymers. The commercialization of isohexides and a few polymers derived from these building blocks has just commenced. Thus, challenges associated with isomerizing functionalization of plant oils and the use of sugar-derived isohexides in chemical syntheses have been summarized, and the potential of these renewable resources has been evaluated.

}, issn = {1463-9262}, doi = {10.1039/d1gc00955a, Early Access Date = MAY 2021}, author = {Pandey, Swechchha and Rajput, Bhausaheb S. and Chikkali, Samir H.} } @article {47612, title = {Replacement of loop residues in TBA by an abasic ethylene glycol spacer: effect on stability, structure and function**}, journal = {ChemistrySelect}, volume = {6}, year = {2021}, month = {OCT }, pages = {10648-10650}, type = {Article}, abstract = {This article describes the synthesis of ethyleneglycol (E) phosphoramidite and its incorporation into the thrombin binding aptamer (TBA) sequence at loop positions. Circular dichroism (CD) study revealed no major disturbances in the secondary structure of TBA by the abasic E unit and the derived oligomers exhibited a typical antiparallel chair-like conformation similar to that of TBA. UV and CD spectroscopy, together with anti-coagulation and HPLC studies revealed that although nuclease stability was enhanced, and anti-coagulation reasonably good, the thermal stability of the quadruplexes was adversely affected.}, keywords = {aptamers, clotting time, ethylene glycol spacer, G-quadruplexes, nuclease stability}, issn = {2365-6549}, doi = {10.1002/slct.202102269}, author = {Wagh, Atish A. and Ghalawat, Monika and Fernandes, Moneesha} } @article {47126, title = {Repurposing the McoTI-II rigid molecular scaffold in to inhibitor of {\textquoteleft}papain superfamily{\textquoteright} cysteine proteases}, journal = {Pharmaceuticals}, volume = {14}, year = {2021}, month = {JAN}, pages = {7}, type = {Article}, abstract = {

Clan C1A or {\textquoteleft}papain superfamily{\textquoteright} cysteine proteases are key players in many important physiological processes and diseases in most living systems. Novel approaches towards the development of their inhibitors can open new avenues in translational medicine. Here, we report a novel design of a re-engineered chimera inhibitor Mco-cysteine protease inhibitor (CPI) to inhibit the activity of C1A cysteine proteases. This was accomplished by grafting the cystatin first hairpin loop conserved motif (QVVAG) onto loop 1 of the ultrastable cyclic peptide scaffold McoTI-II. The recombinantly expressed Mco-CPI protein was able to bind with micromolar affinity to papain and showed remarkable thermostability owing to the formation of multi-disulphide bonds. Using an in silico approach based on homology modelling, protein-protein docking, the calculation of the free-energy of binding, the mechanism of inhibition of Mco-CPI against representative C1A cysteine proteases (papain and cathepsin L) was validated. Furthermore, molecular dynamics simulation of the Mco-CPI-papain complex validated the interaction as stable. To conclude, in this McoTI-II analogue, the specificity had been successfully redirected towards C1A cysteine proteases while retaining the moderate affinity. The outcomes of this study pave the way for further modifications of the Mco-CPI design for realizing its full potential in therapeutics. This study also demonstrates the relevance of ultrastable peptide-based scaffolds for the development of novel inhibitors via grafting.

}, keywords = {Cathepsin, Clan CA cysteine proteases, cyclotide, cystatin, McoTI-II, papain, protein engineering}, doi = {10.3390/ph14010007}, author = {Mishra, Manasi and Singh, Vigyasa and Tellis, Meenakshi B. and Joshi, Rakesh S. and Singh, Shailja} } @article {47752, title = {Resistive switching in HfO2-x/La0.67Sr0.33MnO3 heterostructures: an intriguing case of low H-field susceptibility of an E-field controlled active interface}, journal = {ACS Applied Materials \& Interfaces}, volume = {13}, year = {2021}, month = {NOV }, pages = {54133-54142}, type = {Article}, abstract = {High-performance nonvolatile resistive random access memories (ReRAMs) and their small stimuli control are of immense interest for high-speed computation and big-data processing in the emerging Internet of Things (IoT) arena. Here, we examine the resistive switching (RS) behavior in growth-controlled HfO2/La0.67Sr0.33MnO3 (LSMO) heterostructures and their tunability in a low magnetic field. It is demonstrated that oxygen-deficient HfO2 films show bipolar switching with a high on/off ratio, stable retention, as well as good endurance owing to the orthorhombic-rich phase constitution and charge (de)trapping-enabled Schottky-type conduction. Most importantly, we have demonstrated that RS can be tuned by a very low externally applied magnetic field (similar to 0-30 mT). Remarkably, application of a magnetic field of 30 mT causes RS to be fully quenched and frozen in the high resistive state (HRS) even after the removal of the magnetic field. However, the quenched state could be resurrected by applying a higher bias voltage than the one for initial switching. This is argued to be a consequence of the electronically and ionically {\textquoteleft}{\textquoteleft}active{\textquoteright}{\textquoteright} nature of the HfO2-x/LSMO interface on both sides and its susceptibility to the electric and low magnetic field effects. This result could pave the way for new designs of interface-engineered high-performance oxitronic ReRAM devices.}, keywords = {charge trapping-detrapping, low external magnetic field, oxide-oxide interface, pulsed laser deposition, resistive switching, Schottky barrier}, issn = {1944-8244}, doi = {10.1021/acsami.1c15082}, author = {Antad, Vivek and Shaikh, Parvez A. and Biswas, Abhijit and Rajput, Shatruhan Singh and Deo, Shrinivas and Shelke, V, Manjusha and Patil, Shivprasad and Ogale, Satishchandra} } @article {47610, title = {Resolving diverse protein-DNA footprints from exonuclease-based ChIP experiments}, journal = {Bioinformatics}, volume = {37}, year = {2021}, month = {JUL}, pages = {I367-I375}, type = {Article; Proceedings Paper}, abstract = {Motivation: High-throughput chromatin immunoprecipitation (ChIP) sequencing-based assays capture genomic regions associated with the profiled transcription factor (TF). ChIP-exo is a modified protocol, which uses lambda exonuclease to digest DNA close to the TF-DNA complex, in order to improve on the positional resolution of the TF-DNA contact. Because the digestion occurs in the 50-30 orientation, the protocol produces directional footprints close to the complex, on both sides of the double stranded DNA. Like all ChIP-based methods, ChIP-exo reports a mixture of different regions associated with the TF: those bound directly to the TF as well as via intermediaries. However, the distribution of footprints are likely to be indicative of the complex forming at the DNA. Results: We present ExoDiversity, which uses a model-based framework to learn a joint distribution over footprints and motifs, thus resolving the mixture of ChIP-exo footprints into diverse binding modes. It uses no prior motif or TF information and automatically learns the number of different modes from the data. We show its application on a wide range of TFs and organisms/cell-types. Because its goal is to explain the complete set of reported regions, it is able to identify co-factor TF motifs that appear in a small fraction of the dataset. Further, ExoDiversity discovers small nucleotide variations within and outside canonical motifs, which co-occur with variations in footprints, suggesting that the TF-DNA structural configuration at those regions is likely to be different. Finally, we show that detected modes have specific DNA shape features and conservation signals, giving insights into the structure and function of the putative TF-DNA complexes.}, issn = {1367-4803}, doi = {10.1093/bioinformatics/btab274}, author = {Biswas, Anushua and Narlikar, Leelavati} } @article {47358, title = {Resonance study: effect of partial triples excitation using complex absorbing potential-based Fock-space multi-reference coupled cluster}, journal = {International Journal of Quantum Chemistry}, volume = {121}, year = {2021}, month = {SEP}, pages = {e26738}, type = {Article; Early Access}, abstract = {

Resonances are metastable states with finite lifetime. They play important role in physics, chemistry and biology. The theoretical calculation of resonance state is a challenging problem. In this paper we have studied the shape resonance of Be, Mg, N-2 and CO. We have used correlated independent particle approximation to the Fock space multi-reference coupled cluster singles-doubles with third-order triples (CAP-CIP-FSMRCCSD(T)) method augmented by complex absorption potential. The resonance energy and decay widths are obtained by solving a non-Hermitian eigen-value problem within FSMRCC framework. The effects of the lowest order triples on the resonance energy and decay are studied.

}, keywords = {complex absorbing potential, electron affinity, Fock\&\#8208, negative ion resonance, partial triples, space MRCC}, issn = {0020-7608}, doi = {10.1002/qua.26738, Early Access Date = MAY 2021}, author = {Jana, Irina and Basumallick, Suhita and Pal, Sourav and Vaval, Nayana} } @article {47782, title = {Resveratrol loaded cubic phase nanoparticles with enhanced oral bioavailability}, journal = {BioNanoScience}, volume = {11}, year = {2021}, month = {DEC}, pages = {1108 - 1118}, type = {Article}, abstract = {Resveratrol (RES), a naturally occurring hydrophobic polyphenolic compound, has shown potential anticancer activity. However, due to low aqueous solubility and extensive first pass metabolism (primarily by cytochrome enzymes), it shows poor oral bioavailability. In the present work, novel RES loaded cubosomes of glycerol monooleate (GMO) and Gelucire 44/14 (GL44) (RES-Cubs) were prepared. RES-Cubs were prepared by emulsion evaporation technique and optimized using 32 factorial design. The optimized RES-Cubs were assessed for particle size, zeta potential, entrapment efficiency, FTIR, TEM, SAXS, in vitro resveratrol release and oral bioavailability. RES-Cubs showed an average particle size of 121.7 {\textpm} 2.54~nm with adequate entrapment efficiency of about 82.0 {\textpm} 2.35\% w/w. The analysis of SAXS profile of RES-Cubs revealed Pn3m crystallographic space group containing diamond cubic phase. In vitro RES release profile of RES-Cubs exhibited markedly sustained release of resveratrol. Furthermore, RES-Cubs demonstrated considerable enhancement in oral bioavailability (ninefold) of resveratrol as compared to RES alone. The developed RES loaded cubosomes bearing cytochrome enzyme inhibitor property can act as promising nanocarrier in the delivery of lipophilic drugs with a drawback of in vivo degradation by cytochrome enzymes.}, isbn = {2191-1649}, doi = {10.1007/s12668-021-00892-9}, url = {https://doi.org/10.1007/s12668-021-00892-9}, author = {Rawat, Neeraj Kumar and Torris, Arun and Bhat, Suresh and Mahadik, Kakasaheb and Patil, Sharvil} } @article {47416, title = {Reusable magnetic nanocatalyst for bio-fuel additives: the ultrasound-assisted synthesis of solketal dagger}, journal = {Sustainable Energy \& Fuels }, volume = {5}, year = {2021}, month = {APR}, pages = {2362-2372}, type = {Article}, abstract = {

Acetalization of glycerol into solketal, a potential fuel additive, is a promising approach to utilizing the large waste-stream of glycerol from the biodiesel industry. Herein, we report an efficient ultrasound-assisted room temperature synthesis of solketal by acetalization of glycerol with acetone using an easily recoverable sulfonic acid-functionalized, silica-coated Fe3O4 magnetic nanoparticle (Fe3O4@SiO2@SO3H MNP, FSS MNP) catalyst. The morphology, chemical composition and magnetic properties of the catalyst were elucidated. The acetalization of glycerol was carried out under ultrasonication at room temperature, resulting in 97\% glycerol conversion after 15 minutes and 95\% isolated yield of solketal with 100\% selectivity for this acetal. The facile magnetic retrievability of the catalyst imparted operational simplicity to the solketal synthetic protocol, avoiding complicated catalyst separation and product purification processes. The FSS catalyst was magnetically recycled for up to five catalytic experiments, maintaining a glycerol conversion of 95\% and without deterioration in its selectivity, composition, morphology or magnetic properties, thereby ameliorating the green aspects of the protocol.

}, issn = {2398-4902}, doi = {10.1039/d0se01900c, Early Access Date = MAR 2021}, author = {Rajkumari, Kalyani and Changmai, Bishwajit and Meher, Ananta Kumar and Vanlalveni, Chhangte and Sudarsanam, Putla and Wheatley, Andrew E. H. and Rokhum, Samuel Lalthazuala} } @article {47673, title = {Review of the recent progress on thermal conductivity of nanofluid}, journal = {Journal of Molecular Liquids}, volume = {338}, year = {2021}, month = {SEP }, pages = {116929}, type = {Review}, abstract = {Thermal properties of nanofluids are very well investigated by the global research community for their various applications. The dispersion and stability of the nanoparticles in the base fluid are the essential requirements for the efficient utilization of nanofluids in many applications. The interfacial layer plays a crucial role in the dispersion, stability, and heat transfer properties of the nanofluid. The heat transfer property of the nanofluids is mainly influenced by the heat transfer properties at the particle-fluid interface. The thickness and thermal conductivity of the interfacial layer are the crucial factors that decide the heat transfer at the interface, and the difficulties in the determination of these factors limits the progress of the research. In this review article, the experimental studies on the thickness and thermal conductivity of the interfacial layer are reviewed briefly. The effect of interfacial the layer on the nanoscale mechanisms and thermophysical properties of nanofluids are reviewed. The effect of various tunable parameters on the heat transfer properties of the interfacial layer is also reviewed. This review will be beneficial for fine-tuning nanofluid{\textquoteright}s thermal properties and their commercial applications. (C) 2021 Elsevier B.V. All rights reserved.}, keywords = {Interfacial layer, Interfacial thermal conductance, Nanofluid, Surfactants, Thermal conductivity}, issn = {0167-7322}, doi = {10.1016/j.molliq.2021.116929}, author = {Lenin, Ramanujam and Joy, Pattayil Alias and Bera, Chandan} } @article {47788, title = {Review on bio-inspired synthesis of silver nanoparticles: their antimicrobial efficacy and toxicity}, journal = {Engineered Science}, volume = {16}, year = {2021}, month = {JUN}, pages = {90-128}, type = {Review Paper}, abstract = {Silver nanoparticles are one of the most studied compounds in materials science due to their antimicrobial efficacies and, for instance, in photocatalysis, dye-sensitised solar cells, and biomedical devices. However, conventional methods of synthesis of silver nanoparticles (AgNPs) require hazardous and costly chemicals, and a large amount of energy is expended. In this review, efforts have been made to target where eco-friendly synthetic techniques are being conducted using various plant extract to develop nanoparticles in inexpensive, easily scaled up, and environmentally benign. These findings are stimulated intense research activities that focused on synthesis, modification, properties, and applications of these ecofriendly nanoparticles. This review covers all these aspects, such as the biological routes for the synthesis of nanoparticles employed to synthesis the nano-silver using algae, bacteria, plants, fungi, etc. Also, the chemical positions and possible traditional uses of the plants are enlisted.\ }, issn = {2576-9898}, doi = {10.30919/es8d479}, url = {http://dx.doi.org/10.30919/es8d479}, author = {Prasad, S.R. and Teli, S.B. and Ghosh, J. and Prasad, N.R. and Shaikh, V. S. and Nazeruddin, G.M. and Al-Sehemi, Abdullah G. Al and Patel, Imran and Shaikh, Y.I.} } @article {47773, title = {Review on liquid chromatographic analysis of colchicine in the forensic and medical perspective}, journal = {Toxicologie Analytique et Clinique}, volume = {33}, year = {2021}, month = {DEC}, pages = {276-287}, type = {Article}, abstract = {Colchicine is a tricyclic alkaloid extracted from the family of plants called Colchicaceae. Colchicine is pharmacologically active and works as an anti-mitotic agent. The alkaloid has a narrow therapeutic index, and a slight increase in colchicine concentration can lead to toxicity, and an overdose can be fatal to the individual. This nature of the alkaloid has made the scientific community interested in the analysis of colchicine. This critical review mainly comprises an analytical overview of the extraction and the liquid chromatographic (LC) analysis of colchicine in the field of forensic and medical toxicology. The prominent extraction techniques, detectors, and liquid chromatographic parameters favorable for colchicine estimation have been discussed in this paper. This review has covered the relevant research works within a timeline of two decades based on the scope of the literature and the scientific importance.}, doi = {10.1016/j.toxac.2021.07.007}, author = {Krishna, Rohith and Shivankar, Bhavana} } @article {47129, title = {Review on selective production of acetophenone from oxidation of ethylbenzene over heterogeneous catalysts in a decade}, journal = {Catalysis Letters}, year = {2021}, month = {JAN}, type = {Article; Early Access 2021}, abstract = {

The consumption of acetophenone (AP) is increasing worldwide because of its applications in products such as alcohol, aldehydes, resins, esters, fragrances, and pharmaceuticals. AP is manufactured via several methods like decomposition of cumene hydroperoxide, Hock process, and Friedel-Crafts acylation reaction using homogeneous catalysts with solvent and oxidant. However, it causes several environmental problems that deteriorate the production of AP with these methods. Oxidation of ethylbenzene (EB) is one of the promising methods to synthesize AP in liquid and vapor phases reaction using heterogeneous catalysts, which plays a vital role for selective production of AP. In this review, numerous heterogeneous catalysts are discussed including transition metal nanoparticles, transition metal complexes, and metal free catalysts (carbon nanotubes) used in last 10 years for oxidation of EB. Additionally, catalyst activity along with reaction parameters and its effect, mechanisms, and kinetics study are summarized in this article. The future scope of this reaction is also highlighted. Moreover, this work identifies best catalysts for bulk production of AP with high yield to satisfy global requirement.

}, keywords = {acetophenone, ethylbenzene, Heterogeneous catalysts, Oxidation reaction, reaction mechanisms}, issn = {1011-372X}, doi = {10.1007/s10562-020-03474-8, Early Access Date = JAN 2021}, author = {Nandanwar, Sachin U. and Rathod, Simmy and Bansal, Videsha and Bokade, Vijay V.} } @article {47051, title = {Rhamonolipids produced by Pseudomonas aeruginosa promotes methane hydrates formation in fixed bed silica gel medium}, journal = {Marine Geophysical Research}, volume = {42}, year = {2021}, month = {MAR}, pages = {5}, type = {Article}, abstract = {

Natural gas hydrates are seen as an alternative future energy source. They have also been valued for their carbon dioxide capturing capability, gas separation, desalination, natural gas storage and transportation. Developing economical and viable gas hydrate based technology is one of the most promising research areas of present decade. Successful commercialization of gas hydrate based technology is often curtailed due to slow formation rate. The present study evaluates biosurfactant as a kinetic promoter of methane hydrates formation in a fixed bed C type silica gel medium. Biosurfactant was produced by growing Pseudomonas aeruginosa strain A11 in glycerol supplemented mineral salt medium. Biosurfactant characterization with FTIR, NMR and MALDI-TOF spectroscopy reveled it to be a glycolipids type biosurfactant namely rhamnolipids. Saturating C type silica gel with of 100 ppm rhamnolipids solution enhanced the rate of methane hydrates formation by reducing the induction time. Mole of methane consumed and percentage of water to hydrate conversion was observed to be more in 1000 ppm rhamnolipids saturated C type silica gel as compared to quiescent water system and water saturated silica gel system. Overall results suggest that rhamonolipids produced by strain A11 in combination with silica gel can be utilized as environmentally safe kinetic promoter for methane hydrate formation.

}, keywords = {Biosurfactant, Energy, Glycolipids, Induction time, Kinetic promoter}, issn = {0025-3235}, doi = {10.1007/s11001-020-09426-6}, author = {Arora, Amit and Cameotra, Swaranjit Singh and Balomajumder, Chandrajit and Kumar, Rajnish and Singh, Anil Kumar and Santhakumari, B. and Kumar, Pushpendra and Laik, Sukumar} } @article {47063, title = {Rhizobacterial consortium mediated aroma and yield enhancement in basmati and non-basmati rice ( Oryza sativa L.)}, journal = {Journal of Biotechnology}, volume = {328}, year = {2021}, month = {FEB}, pages = {47-58}, type = {Article}, abstract = {

Basmati and non-basmati rice varieties are commercially important. Aromatic rice varieties are low yielding and recently depletion in aroma is observed due to the shift towards modern agriculture. Therefore, it is necessary to restore the aroma and increase the yield through sustainable agriculture. The use of microbial bioinoculants is one of the promising ways to achieve these targets. With these objectives, rhizospheric bacterial strains Enterobacter hormaechei (AM122) and Lysinibacillus xylanilyticus (DB25) having the property of synthesizing 2acetyl-1-pyrroline (2AP) were isolated from the rhizosphere of two aromatic rice varieties, Ambemohar-157 and Dehradun Basmati respectively and their effect on plant growth, aroma and yield enhancement under mono-inoculation and consortium conditions was analyzed. The bacterial inoculum in consortium resulted in significant improvement in vegetative growth, yield and 2AP content over mono inoculation and control. The study highlights the potential of E. hormaechei and L. xylanilyticus in plant growth, yield and aroma enhancement in basmati and non-basmati rice varieties. These strains can be taken up further for developing a commercial bioformulation.

}, keywords = {2-Acetyl-1-pyrroline, Basmati rice, Non-basmati rice, plant growth promotion, Rhizosphere, yield}, issn = {0168-1656}, doi = {10.1016/j.jbiotec.2021.01.012}, author = {Dhondge, Harshal V. and Pable, Anupama A. and Barvkar, Vitthal T. and Dastager, Syed G. and Nadaf, Altafhusain B.} } @article {47831, title = {Rigidity dictates spontaneous helix formation of thermoresponsive colloidal chains in poor solvent}, journal = {ACS Nano}, volume = {15}, year = {2021}, month = {DEC}, pages = {19702-19711}, type = {Article}, abstract = {The formation of helical motifs typically requires specific directional interactions. Here, we demonstrate that isotropic interparticle attraction can drive self-assembly of colloidal chains into thermo-reversible helices, for chains with a critical level of backbone rigidity. We prepare thermoresponsive colloidal chains by cross-linking PNIPAM microgel-coated polystyrene colloids ({\textquotedblleft}monomers{\textquotedblright}), aligned in an AC electric field. We control the chain rigidity by varying cross-linking time. Above the LCST of PNIPAM, there is an effective attraction between monomers so that the colloidal chains are in a bad solvent. On heating, the chains decrease in size. For the most rigid chains, the decrease is modest and is not accompanied by a change in shape. Much less rigid chains form relatively compact structures, resulting in a large increase in the local monomer density. Unusually, chains with intermediate rigidity spontaneously assemble into helical structures. The chain helicity increases with temperature and plateaus above the collapse transition temperature of the microgel particles. We simulate a minimal model that captures the spontaneous emergence of the helical conformations of the polymeric chain and provides insight into this shape transition. Our work suggests that a purely mechanical instability for semiflexible filaments can drive helix formation, without the need to invoke directional interactions.}, doi = {10.1021/acsnano.1c07048}, author = {Biswas, Bipul and Mitra, Debarshi and KP, Fayis and Bhat, Suresh and Chatterji, Apratim and Kumaraswamy, Guruswamy} } @article {47783, title = {Rise of the superbugs: what we need to know overview of antimicrobial resistance}, journal = {Resonance}, volume = {26}, year = {2021}, month = {SEP}, pages = {1251 - 1266}, type = {Article}, abstract = {Bacteria often cause infections, and we take antibiotics to help us recover. Antibiotics are like magic pills that have saved millions of lives. However, the overuse of antibiotics is now making bacteria evolve fast and evade these antibiotics. A few bacteria like the purple one in the petri plate (Figure 1) have evolved a way to dodge and not get killed by one particular kind of antibiotic. The day might come soon when not a single antibiotic would work, and we could die of even tiny paper cuts. In this article, we discuss what antibiotics are, how they target bacteria, and why bacteria are suddenly becoming resistant to antibiotics. We include a list of ten points that each of us must follow and a pledge for everyone to take, to help stop the spread of antibiotic resistance. A small questionnaire is included that we would like you all to answer. Together we can win the battle against antibiotic resistance.}, isbn = {0973-712X}, doi = {10.1007/s12045-021-1227-8}, url = {https://doi.org/10.1007/s12045-021-1227-8}, author = {Sengupta, Durba and Raghunathan, Anu} } @article {47395, title = {Role of charge compensation mechanism and defect dipoles on properties of Mn doped BCT ceramics}, journal = {Ceramics International}, volume = {47}, year = {2021}, month = {APR}, pages = {11491-11505}, type = {Article}, abstract = {

Single-phase Mn doped Barium Calcium Titanate (BCT) (Ba0.80Ca0.20Ti1-xMnxO3; x = 0.000, 0.005, 0.010, 0.015 and 0.020) lead free ceramics have been prepared by conventional solid-state reaction method. XRD studies and Rietveld refinement confirmed the existence of tetragonal phase (P4mm) for all prepared ceramic compositions. The average grain size increased up to x = 0.005 and thereafter it decreased with increase in Mn content in BCT compositions. Analysis of temperature-dependent dielectric study revealed phase transformation from tetragonal to cubic phase and defect dipole induced anomaly in paraelectric region of temperature-dependent dielectric constant ( epsilon{\textquoteright}-T) curve. Degree of diffusiveness increased with Mn doping in BCT ceramics as confirmed by evaluating diffused phase transition (DPT) parameters (gamma and delta(c)) by Power Law fitting and width of diffused phase transition (D{\textquoteright}) obtained from derivative of epsilon{\textquoteright}-T curve. Ferroelectric (P-E loops) study revealed that ceramic composition with x = 0.015 Mn content showed the highest remnant polarization (P-r) and maximum polarization (P-max) of 14.10 mu C/cm(2) and 24.20 mu C/cm(2) respectively. Enhancement in energy storage properties with applied electric fields have been observed at room temperature. Maximum energy storage density W-rec similar to 190.89 mJ/cm(3) with an efficiency of 48.63\% has been obtained for x = 0.015. A large piezoelectric charge coefficient (d(33)) of 460 pC/N has been obtained for x = 0.020. The room temperature magnetic measurements shows feeble ferromagnetism for Mn doped samples. These studies suggest the application of these ceramics for multilayer ceramic capacitors, energy storage, and high power applications..

}, keywords = {Defect dipoles, Dielectric anomaly, Energy storage, Ferroelectric materials, ferromagnetic materials, Lead-free ceramics, Mn doped BCT, piezoelectric, Williamson-Hall (W-H)}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2020.12.277}, author = {Redhu, Preeti and Sharma, Preeti and Hooda, Ashima and Singh, Anupinder and Sharma, Geeta and Punia, Rajesh} } @article {47823, title = {Role of chemical structure of support in enhancing the catalytic activity of a single atom catalyst toward NRR: a computational study}, journal = {Frontiers in Chemistry}, volume = {9}, year = {2021}, month = {SEP}, type = {Article}, abstract = {Using the periodic density functional theory{\textendash}based methodology, we propose a potential catalytic system for dinitrogen activation, viz., single metal atoms (Mo, Fe, and V) supported on graphene-based sheets. Graphene-based sheets show an excellent potential toward the anchoring of single atoms on them (Mo, Fe, and V) with adsorption energies ranging between 1.048 and 10.893~eV. Factors such as defects and BN doping are noted to enhance the adsorption energies of single metal atoms on the support. The adsorption of a dinitrogen molecule on metal atom{\textendash}anchored graphene-based supports is seen to be highly favorable, ranging between 0.620 and 2.278~eV. The adsorption is driven through a direct hybridization between the d orbitals of the metal atom (Mo, Fe, and V) on the support and the p orbital of the molecular nitrogen. Noticeably, BN-doped graphene supporting a single metal atom (Mo, Fe, and V) activates the N2 molecule with a red shift in the N{\textendash}N stretching frequency (1,597~cm-1 as compared to 2,330~cm-1 in the free N2 molecule). This red shift is corroborated by an increase in the N{\textendash}N bond length (1.23~{\r A} from 1.09~{\r A}) and charge transfer to an N2 molecule from the catalyst.}, issn = {2296-2646}, doi = {10.3389/fchem.2021.733422}, author = {Senthamaraikannan, Thillai Govindaraja and Kaliaperumal, Selvaraj and Krishnamurty, Sailaja} } @article {47098, title = {Role of cholesterol in transmembrane dimerization of the ErbB2 growth factor receptor}, journal = {Journal of Membrane Biology}, year = {2021}, month = {JAN}, type = {Article; Early Access 2021}, abstract = {

The association of ErbB2 growth factor receptors is critical for cell growth and potentiates tumor proliferation in several cancer types. An important aspect in ErbB2 association is the role of lipids such as cholesterol, especially since their metabolism is often reprogrammed in cancer cells. Here, we have coupled metadynamics with coarse-grain simulations to identify cholesterol effects in the transmembrane dimerization of ErbB2 receptors. Overall, cholesterol interactions are observed with the receptor that directly tunes the association energetics. Several dimer conformations are identified both in the presence and absence of cholesterol, although the dimer regime appears to be more favorable in the presence of cholesterol. We observe an overall modulation of the underlying energy profile and the symmetric active and inactive conformational states are not distinguished in the presence of cholesterol. We show that cholesterol binds to the receptor transmembrane domain at a site (CRAC motif) that overlaps with the dimer interface (SmXXXSm motif). The competition between the transmembrane interactions and cholesterol interactions decides the final conformational landscape. Our work is an important step toward characterizing cholesterol effects in ErbB2 membrane receptor function. [GRAPHICS] .

}, keywords = {Cholesterol, ErbB2 growth factor receptor, Her2 dimer, Juxtamembrane dimer, Martini coarse-grain simulations, Metadynamics}, issn = {0022-2631}, doi = {10.1007/s00232-021-00168-z, Early Access Date = JAN 2021}, author = {Pawar, Aiswarya B. and Sengupta, Durba} } @article {47634, title = {Role of metal-support interaction for atmospheric pressure CO2 hydrogenation over Pd/(Ti)-SBA-15 catalyst: effect of titanium composition on products selectivity}, journal = {Molecular Catalysis}, volume = {511}, year = {2021}, month = {JUL}, pages = {111732}, type = {Article}, abstract = {The potential role of metal-support interaction for tuning the product selectivity during atmospheric pressure CO2 hydrogenation has been demonstrated on Pd/(Ti)-SBA-15 catalyst. Highly dispersed Pd NPs on SBA-15 (Pd/ SBA-15) was synthesized and further modified with titanium of varying composition. Comparison of catalytic activity of Pd/Ti-SBA-15 with its counterparts (Pd/SBA-15 and Pd/TiO2) illustrated the significance of strong PdTi interface in this catalyst and its role in tuning the product selectivity of CO2 hydrogenation. The generation of an ample amount of oxygen vacancies in the Pd/Ti-SBA-15 catalyst with maximum metallic Pd sites in close vicinity of Ti is proposed to boost the CO2 hydrogenation activity.}, keywords = {CO2 hydrogenation, Metal-support interaction, Modified deposition precipitation, oxygen vacancies, Titanosilicates}, issn = {2468-8231}, doi = {10.1016/j.mcat.2021.111732}, author = {Soni, Yogita and Gupta, Sharad and Vinod, C. P.} } @article {47375, title = {Role of Nd3+ concentration on the microstructure and scintillation behaviour of langbeinite sulphate (vol 284, 128997, 2021)}, journal = {Materials Letters}, volume = {290}, year = {2021}, month = {MAY}, pages = {129472}, type = {Correction}, issn = {0167-577X}, doi = {10.1016/j.matlet.2021.129472}, author = {Poornima, Velswamy and Mohan, Subramaniam and Uma, Tiruchirappalli Sivagnanam} } @article {47096, title = {Role of Nd3+ concentration on the microstructure and scintillation behaviour of langbeinite sulphate}, journal = {Materials Letters}, volume = {284}, year = {2021}, month = {FEB }, pages = {128997}, type = {Article}, abstract = {

Langebeinite (K2Ca2(SO4)(3)) ceramics doped with increasing concentrations of Nd3+ ions (0.01-0.04 mol\%) was prepared by wet chemical precipitation and calcination at 800 degrees C. Thermal studies revealed high temperature stability of the phosphors. UV-VIS-NIR spectroscopic analysis of phosphors reveal strong absorption peaks representing f -\> f transitions. Direct bandgap derived from Kubelka-Munk plot was found to be similar to 5.66 eV. FTIR studies reveal tetrahedral symmetry of the SO42 ions. SEM micrographs reveal the formation of phosphors with wide particle size distribution and elemental composition was analysed using EDX studies. Scintillation studies representing a single high intensity peak around 784 nm is ascribed to I-4(9/2) -\> F-4(5/2) + H-2(9/2) transition. Langbeinite phosphor with 0.02 mol\% of Nd3+ exhibited maximum emission intensity indicating optimal concentration for scintillation studies favouring the development of NIR emitting phosphors. (c) 2020 Elsevier B.V. All rights reserved.

}, keywords = {Ceramics, Langebeinites, Luminescence, Microstructure, Neodymium, Scintillation}, issn = {0167-577X}, doi = {10.1016/j.matlet.2020.128997}, author = {Poornima, Velswamy and Mohan, Subramaniam and Uma, Tiruchirappalli Sivagnanam} } @article {47641, title = {Role of preparation parameters of Cu-Zn mixed oxide catalyst in solvent free glycerol carbonylation with urea}, journal = {Journal of the Indian Chemical Society}, volume = {98}, year = {2021}, month = {JUL}, pages = {100090}, type = {Article}, abstract = {Solvent-free carbonylation of glycerol with urea to glycerol carbonate (GC) was achieved over heterogeneous Cu-Zn mixed oxide catalyst. Cu-Zn catalysts with different ratios of Cu:Zn were prepared using co-precipitation (CP) and oxalate gel (OG) methods. As compared to CuO-ZnO(2:1) catalyst prepared by oxalate gel (OG) method, much higher conversion of glycerol and highest selectivity towards glycerol carbonate (GC) was achieved with CuO-ZnO_CP(2:1) catalyst. Physicochemical properties of prepared catalysts were investigated by using XRD, FT-IR, BET, TPD of CO2 and NH3 and TEM techniques. The effect of stoichiometric ratio of Cu/Zn, calcination temperature of CuO-ZnO catalysts and effect of reaction parameters such as molar ratio of substrates, time and temperature on glycerol conversion to GC were critically studied. Cu/Zn of 2:1 ratio, glycerol-urea 1:1 molar ratio, 145 degrees C reaction temperatures were found to be optimized reaction conditions to achieve highest glycerol conversion of 86\% and complete selectivity towards GC. The continuous expel of NH 3 from reaction the mixture avoided formation of ammonia complex with CuO-ZnO catalyst. As a result of this, CuO-ZnO catalyst could be recycled up to three times without losing its initial activity.}, keywords = {Co-precipitation (CP), Glycerol, Glycerol carbonate, Oxalate gel (OG)}, issn = {0019-4522}, doi = {10.1016/j.jics.2021.100090}, author = {Charate, Shrinivas and Shinde, Suhas and Kondawar, Sharda and Desai, Uday and Wadgaonkar, Prakash and Rode, Chandrashekhar} } @article {47703, title = {Room-temperature quasi-catalytic hydrogen generation from waste and water}, journal = {Green Chemistry}, volume = {23}, year = {2021}, month = {OCT}, pages = {7528-7533}, type = {Article}, abstract = {A solvation-driven catalyst-free H-2 generation system from water and various waste hydrosilanes at room temperature was developed, with good to quantitative H-2 yields in minutes. Using a green solvent is found to promote the strong coordination of proton carriers with hydrosilane to liberate H-2 based on molecular dynamics simulations. Theoretical calculations clarify that OH(-)in situ generated from H2O enabled by solvation is favorable for activating the Si-H species of hydrosilane, and the in situ formed Si-OH interacts more effectively with the adjacent remaining Si-H, both contributing to the overall enhanced H-2 generation. Moreover, the overall life-cycle impacts of the developed system are less than those of industrial H-2 production processes, especially in ozone layer depletion and abiotic depletion resources - fossil fuels. This protocol realizes the potential of efficiently producing H-2 from waste and water, and opens a new avenue to alleviate petroleum consumption.}, issn = {1463-9262}, doi = {10.1039/d1gc02722k}, author = {Wu, Hongguo and Zhang, Li-Long and Wang, Junqi and Jiang, Yiyuan and Li, Hu and Sudarsanam, Putla and Yang, Song} } @article {47047, title = {Ru-catalyzed asymmetric transfer hydrogenation of alpha-acyl butyrolactone via dynamic kinetic resolution: asymmetric synthesis of bis-THF alcohol intermediate of darunavir}, journal = {Tetrahedron Letters}, volume = {66}, year = {2021}, month = {MAR }, pages = {152831}, type = {Article}, abstract = {

The Ru-catalyzed enantio- and diastereoselective dynamic kinetic resolution of alpha-(benzyloxy/benzoyloxy)acyl-gamma-butyrolactones has been examined via transfer hydrogenation. Employing the in situ prepared (R,R)-Ru-FsDPEN catalyst, the transfer hydrogenation of using formic acid/triethylamine at rt gave the corresponding (S)-3-((S)-2-(benzyloxy/benzoyloxy)-1-hydroxyethyl)dihydrofuran-2(3H)-on e with good to excellent diastereo- and enantioselectivity. One of the resulting hydrogenation product prepared on gram scales was utilized for the synthesis of (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-ol (1), a key synthetic intermediate of various HIV protease inhibitors such as darunavir with excellent enantio-(95\% ee) and diastereoselectivities (dr 95:5). (C) 2021 Elsevier Ltd. All rights reserved.

}, keywords = {Bis-THF-OH intermediate, Darunavir, Dynamic kinetic resolution, Ru-catalysis, transfer hydrogenation}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2021.152831}, author = {More, V. Ganesh and Malekar, V. Pushpa and Kalshetti, Rupali G. and Shinde, Mahesh H. and Ramana, V. Chepuri} } @article {48006, title = {Rapid synthesis of the epi-biotin sulfone via tandem S,N-carbonyl migration/aza-michael/spirocyclization and haller-bauer reaction}, journal = {ACS Omega}, volume = {7}, year = {2022}, month = {MAY }, pages = {17215-17222}, type = {Article}, abstract = {

A synthesis of 2-epi-biotin sulfone was accomplished from commercially available L-cysteine. The synthesis features an unprecedented tandem S,N-carbonyl migration/aza-Michael/spirocyclization reaction from an L-cysteine-derived enone with aq. ammonia, in which three new sigma bonds and two rings are formed. In addition, the synthesis includes a highly diastereoselective late-stage Haller-Bauer reaction of sulfone for direct introduction of the carbon side chain.

}, issn = {2470-1343}, doi = {10.1021/acsomega.2c01030}, author = {Chavan, Subhash P. and Kalbhor, Dinesh B. and Gonnade, Rajesh G.} } @article {48203, title = {Reactive extraction of gluconic acid using trioctylamine in different diluents}, journal = {Chemical Engineering \& Technology}, volume = {45}, year = {2022}, month = {MAR}, pages = {417-424}, type = {Article}, abstract = {

Reactive extraction of gluconic acid (GA) from aqueous solutions was investigated using trioctylamine (TOA) as extractant in the presence of benzyl alcohol (BA) and 1-decanol (DE) as diluents. Physical extraction of GA with pure diluents in the absence of TOA was found to be poor. Reactive extraction with an amine-diluent mixture enhanced the separation process. Higher extraction efficiencies and distribution coefficients were achieved in the presence of BA as compared to DE. Further optimization studies were carried out to determine the synergistic effect of amine/diluent ratio. Loading ratios higher than 0.5 suggested 3:1 complex formation of GA with the amine. A reactive extraction mechanism of GA in TOA was proposed, and the equilibrium complexation constant was determined.

}, keywords = {1-Decanol, Benzyl alcohol, Gluconic acid, reactive extraction, Trioctylamine}, issn = {0930-7516}, doi = {10.1002/ceat.202100373}, author = {Kakku, Sivasankar and Gaikwad, Shripal M. and Gaikwad, Shashank and Taralkar, Suyogkumar V. and Billa, Sarath Babu and Chakinala, Anand Gupta and Chakinala, Nandana} } @article {48133, title = {Reactivity of four coordinate iridium complex towards hydrogen: an experimental and computational study}, journal = {Journal of Organometallic Chemistry}, volume = {965}, year = {2022}, month = {MAY}, pages = {122317}, type = {Article}, abstract = {

Reaction of a four coordinate, 16-electron Ir complex, [Ir-(iPr)4(POCOP)(PPh3)] (4 ) (((iPr)4)(POCOP= 2,6-bis(di-isopropyl phosphinito)benzene, kappa(3)-C6H3-1,3-[OP((iPr))(2)](2)), with H-2 resulted in an oxidative addition product, cis-dihydride complex, cis-[Ir(H)(2) ((iPr)4)(POCOP)(PPh3)] ( cis-5 ) presumably via the intermediacy of a sigma complex, [Ir(eta(2)-H-2)((iPr)4)(POCOP)(PPh3)]. The cis-dihydride complex completely isomerizes to the trans-dihydride complex trans-[Ir(H)(2) ((iPr)4)(POCOP)(PPh3)] ( trans-5 ) under ambient conditions in about 3 h. It was found that the steric and electronic features on the iridium center have significant influence on the approach of H-2 onto the metal center followed by oxidative addition and isomerization. The isomerization process was studied in detail and all the mechanistic aspects have been elucidated using a combination of both experimental work and computation. The cis-dihydride complex isomerizes to the trans-dihydride by compensating the trans influence of the strongly trans-directing hydride ligand. A mechanism involving the exchange of the position of PPh3 with a hydride ligand cis to itself via PPh3 dissociation and re-coordination thereby resulting in the formation of the trans-dihydride complex, has been proposed for the isomerization. The cis-dihydride was found to be a highly active catalyst for hydrogenation of ethy-lene. A competing reactivity study of cis-dihydride between isomerization versus insertion of C2H4 into the Ir-H bond, was studied experimentally and computationally. (c) 2022 Elsevier B.V. All rights reserved.

}, keywords = {Hydrogenation, Insertion, iridium complex, isomerization, Oxidative addition, Reductive elimination}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2022.122317}, author = {Agrawal, Nisha K. and Dash, Soumya R. and Vanka, Kumar and Nethaji, Munirathinam and Jagirdar, Balaji R.} } @article {48160, title = {Ready access to benzannulated [5,5]-oxaspirolactones using Au(III)-catalyzed cascade cyclizations}, journal = {Journal of Organic Chemistry}, volume = {87}, year = {2022}, month = {MAR}, pages = {3025-3041}, type = {Article}, abstract = {

This work showcases an unprecedented Au(III)-catalyzed cascade cyclization of 2-(4-hydroxyalkynyl)benzoates to access benzannulated [5,5]-oxaspirolactones related to biologically active natural products. This reaction proceeds through an initial 5-endo-dig mode of hydroalkoxylation of the alkynol segment to give the oxocarbenium species (via cyclic enol-ether) followed by the addition of carboxylate onto the oxocarbenium that delivers the oxaspirolactone scaffold. While testing this method{\textquoteright}s scope, we found that the steric and electronic environment of the hydroxyl group could alter the reaction pathway that delivers isochromenone through a competitive 6-endo-dig mode of attack of the carboxylate onto the tethered alkyne.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.1c02843}, author = {Mankad, Yash and Thorat, Sagar S. and Das, Pronay and Krishna, Gamidi Rama and Kontham, Ravindar and Reddy, D. Srinivasa} } @article {48143, title = {Ready access to densely substituted furans using Tsuji-Wacker type cyclization}, journal = {Journal of Organic Chemistry}, volume = {87}, year = {2022}, month = {JAN }, pages = {556-568}, type = {Article}, abstract = {

A competent method for the construction of highly substituted furans catalyzed by Pd(II) and Cu(II) chloride has been developed. The method provides easy access to di-, tri-, and tetrasubstituted furans from corresponding diols with relatively mild conditions in a unified strategy. The developed method has been successfully tested with more than 25 substrates, which resulted in furans of multiple substitution patterns with up to 84\% isolated yields.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.1c02567}, author = {Masal, Dattatraya P. and Choudhury, Rahul and Singh, Aman and Reddy, D. Srinivasa} } @article {48119, title = {Recent advances in the metal-organic framework-based electrocatalysts for trifunctional electrocatalysis}, journal = {Dalton Transactions}, volume = {51}, year = {2022}, month = {SEP}, pages = {13573-13590}, type = {Review}, abstract = {

The sustainable energy technology is in great demand due to the depletion and the risks associated with the use of fossil fuels. Various energy technologies like regenerative fuel cells, zinc-air batteries, and overall water-splitting devices have a huge scope in the growth of green energy. The efficiency of these devices is reliant upon the multifunctional electrocatalysts, which include both bifunctional and trifunctional electrocatalysts. Among the different categories of the materials used for such multifunctional electrocatalysis, metal-organic-frameworks (MOFs) occupy a very consolidated place because of their high surface area, porosity, and many other unique physicochemical properties. However, the use of MOFs for the trifunctional electrocatalytic applications is in the budding phase and needs to be explored more. Further, most of these MOF-based trifunctional electrocatalysts are derived by pyrolyzing MOFs at high temperatures. Therefore, there is a need to develop more conductive MOFs which can be directly utilized for the trifunctional applications. In this frontier article, we present the latest reports on the MOF-based materials for trifunctional applications. The material design strategies of the MOF-based materials for trifunctional electrocatalysis have been discussed. The progressive improvements made with MOFs in electrocatalytic applications have been provided with emphasis on the structural, active site and compositional requirements. Finally, the challenges and viewpoints on the future development of the MOF-based materials for trifunctional electrocatalysis have been provided.

}, issn = {1477-9226}, doi = {10.1039/d2dt01981g}, author = {Devi, Bandhana and Koner, Rik Rani and Kurungot, Sreekumar} } @article {47992, title = {Recent developments in the applications of biomass-derived sulfonated carbonaceous solid acid catalysts}, journal = {Helvetica Chimica Acta}, volume = {105}, year = {2022}, month = {AUG}, pages = {e202200032}, type = {Review}, abstract = {

Recently, carbon-based materials are gaining a lot of attraction. It is considered as an emerging area of research and has gained significant importance as an efficient catalyst/material in various fields. Biomass is abundantly available, cheap and a renewable carbon resource. Sulfonated carbonaceous solid acid catalyst can be derived by sulfonation of various sources of biomass such as sugars, lignin, fruit waste, agro-waste, bio-char, etc. Sulfonated carbonaceous solid acid catalysts can be used as a substitute to liquid acids. These catalysts possess a stable carbon skeleton and are insoluble in almost all organic solvents as well as under acidic/basic conditions. This review covers details about biomass-derived sulfonated carbonaceous solid acid catalysts and its catalytic activities in many important transformations such as hydrolysis of cellulose, synthesis of biodiesel, synthesis of various important chemicals and for various organic transformations.

}, keywords = {Biodiesel, Biomass, cellulose, Hydrolysis, sulfonated carbonaceous solid acid catalyst}, issn = {0018-019X}, doi = {10.1002/hlca.202200032}, author = {Kirdant, Swapnali P. and Tamboli, Asma T. Biradar and Jadhav, Vrushali H.} } @article {48378, title = {Rediscovering Bacon{\textquoteright}s hydrazine/phenylhydrazine mediated cyclization of 2,2 {\textquoteleft}-dicarbonylbi(hetero)aryls: construction of (5-azo)-/indazolo[2,3-a]quinolines}, journal = {Organic \& Biomolecular Chemistry}, volume = {20}, year = {2022}, month = {JAN}, pages = {636-648}, type = {Article}, abstract = {

Hydrazine/phenylhydrazine-mediated reductive dicarbonyl coupling reactions have been carried out under mild conditions to provide polycyclic aromatic compounds and azo-substituted polyaromatic compounds. This method has a broad substrate scope with good functional group compatibility.

}, issn = {1477-0520}, doi = {10.1039/d1ob02207e}, author = {Dhote, Pawan S. and Ramana, V. Chepuri} } @article {48065, title = {Reduction of carbon dioxide to dimethylformamide using ruthenium doped Mg/Al hydrotalcites under supercritical conditions}, journal = {Journal of CO2 Utilization}, volume = {61}, year = {2022}, month = {JUL}, pages = {102055}, type = {Article}, abstract = {

The utilization of carbon dioxide is one of the developing areas due to its significant contribution to global warming. Reducing carbon dioxide (CO2) to formic acid and its derivatives has gained importance because of its thermodynamic limitations and high industrial demand. In this article, we report the synthesis of dime-thylformamide (DMF) using ruthenium doped Mg/Al calcined hydrotalcite by CO2 hydrogenation in the presence of dimethylamine (DMA). At optimized conditions, complete conversion of dimethylamine was achieved with more than 92\% product yield at 170 degrees C and 13 MPa pressure with a reaction time of 6 h. Key catalyst properties were determined using X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), CO2-temper-ature programmed desorption (TPD), H-2 temperature-programmed reduction (TPR) and Fourier transform infrared (FTIR). The determination of surface morphology was carried out using field emission scanning electron microscope (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM). At the same time, the chemical composition was verified by energy-dispersive X-ray (EDS). In addition, kinetic modeling is performed using the two site Langmuir-Hinshelwood-Hougen-Watson model. The regressed kinetic parameters gave an appropriate fit with experimental concentration values and activation energy is calculated as 413 kJ/mol K-1.

}, keywords = {Dimethylformamide, Hydrogenation, hydrotalcite, Langmuir-Hinshelwood-Hougen-Watson model, Supercritical carbon dioxide}, issn = {2212-9820}, doi = {10.1016/j.jcou.2022.102055}, author = {Chaudhary, Sagar D. and Rahatade, Shardul S. and Joshi, Sunil S. and Mali, Nilesh A.} } @article {48091, title = {Reference quality genome sequence of Indian pomegranate cv. {\textquoteleft}Bhagawa{\textquoteright} (Punica granatum L.)}, journal = {Frontiers in Plant Science}, volume = {13}, year = {2022}, month = {SEP}, pages = {947164}, type = {Article}, abstract = {

Pomegranate is an important fruit crop for ensuring livelihood and nutrition security in fragile semi-arid regions of the globe having limited irrigation resources. This is a high-value, nutritionally rich, and export-oriented agri-commodity that ensures high returns on investment to growers across the world. Although it is a valuable fruit crop, it has received only a limited genomics research outcome. To fast-track the pomegranate improvement program, de novo whole-genome sequencing of the main Indian cultivar {\textquoteleft}Bhagawa{\textquoteright} was initiated by the Indian Council of Agricultural Research-National Research Center on Pomegranate (ICAR-NRCP). We have demonstrated that a combination of commercially available technologies from Illumina, PacBio, 10X Genomics, and BioNano Genomics could be used efficiently for sequencing and reference-grade de novo assembly of the pomegranate genome. The research led to a final reference-quality genome assembly for {\textquoteleft}Bhagawa{\textquoteright} of 346.08 Mb in 342 scaffolds and an average N50 of 16.12 Mb and N90 of 1088.62 Kb. This assembly covered more than 98\% of the estimated pomegranate genome size, 352.54 Mb. The LTR assembly index (LAI) value of 10 and 93.68\% Benchmarking Universal Single-Copy Orthologs (BUSCO) completeness score over the 1,440 ortholog genes of the completed pomegranate genome indicates the quality of the assembled pomegranate genome. Furthermore, 29,435 gene models were discovered with a mean transcript length of 2,954 bp and a mean coding sequence length 1,090 bp. Four transcript data samples of pomegranate tissues were mapped over the assembled {\textquoteleft}Bhagawa{\textquoteright} genome up to 95\% significant matches, indicating the high quality of the assembled genome. We have compared the {\textquoteleft}Bhagawa{\textquoteright} genome with the genomes of the pomegranate cultivars {\textquoteleft}Dabenzi{\textquoteright} and {\textquoteleft}Taishanhong.{\textquoteright} We have also performed whole-genome phylogenetic analysis using Computational Analysis of Gene Family Evolution (CAFE) and found that Eucalyptus grandis and pomegranate diverged 64 (60-70) million years ago. About 1,573 protein-coding resistance genes identified in the {\textquoteleft}Bhagawa{\textquoteright} genome were classified into 32 domains. In all, 314 copies of miRNA belonging to 26 different families were identified in the {\textquoteleft}Bhagawa{\textquoteright} genome. The reference-quality genome assembly of {\textquoteleft}Bhagawa{\textquoteright} is certainly a significant genomic resource for accelerated pomegranate improvement.

}, keywords = {genome sequencing, hybrid genome assembly, Long Terminal Repeats Assembly Index (LAI), PacBio, pomegranate}, issn = {1664-462X}, doi = {10.3389/fpls.2022.947164}, author = {Roopa Sowjanya, P. and Shilpa, Parashuram and Patil, Goudappa Prakash and Babu, Dhinesh Karuppannan and Sharma, Jyotsana and Sangnure, Vipul R. and Mundewadikar, Dhananjay M. and Natarajan, Purushothaman and Marathe, Arvind Rajiv and Reddy, Umesh K. and Singh, Vikram Nripendra} } @article {48125, title = {Regio-isomerism directed electrocatalysis for energy efficient zinc-air battery}, journal = {iScience}, volume = {25}, year = {2022}, month = {OCT }, pages = {105179}, type = {Article}, abstract = {

We have investigated the role of ligand isomerism in modulating the mechanisms and kinetics associated with charge/ discharge chemistry of an aqueous metal-air battery. The dominant electron-withdrawing inductive effect (-I effect) and the diminished electron-withdrawing resonance effect (-R effect) in the alpha-NO2 isomer noticeably diminishes the rate of oxygen reduction (ORR) and oxygen evolution reactions (OER) on the catalytic Co-center. In their beta-counterpart, the cumulative -I and -R effects noticeably enhance the OER and ORR kinetics on the same catalytic Co-center. Therefore, the regioisomerism of the -NO2 functionality amplifies the kinetics of ORR/OER without influencing their mechanistic pathways. When isomeric electrocatalysts are integrated to aid the charge chemistry of a Zn-air battery, the overpotential could be decreased by similar to 250mV with beta-NO2 isomer leading to a round-trip efficiency as high as 60\%. This work contributes to the design of novel molecular platforms to target the overall round-trip efficiency of energy storage and conversion devices.

}, doi = {10.1016/j.isci.2022.105179}, author = {Mukhopadhyay, Sanchayita and Devendrachari, Mruthyunjayachari Chattanahalli and Kanade, Sandeep C. and Vinod, Chathakudath Prabhakaran and Kotresh, Harish Makri Nimbegondi and Thotiyl, Musthafa Ottakam} } @article {48058, title = {Regioselective synthesis of 1,4,5-trisubstituted 1,2,3-triazole derivatives from alpha,beta-unsaturated carbonyls}, journal = {European Journal of Organic Chemistry}, volume = {2022}, year = {2022}, month = {JUL}, pages = {e202200317}, type = {Article}, abstract = {

The copper-catalyzed oxidative azide-olefin cycloaddition (OAOC) reaction of differently substituted alpha,beta-unsaturated carbonyls with azides provided an efficient method for preparing biologically active 1,4,5-trisubstituted 1,2,3-triazoles. In this study, the cycloaddition reaction was found to be a simple and powerful method for constructing diverse mono- and bis-(1,4,5-trisubstituted 1,2,3-triazole) functionalized heterocyclic compounds in moderate to high yields with great regioselectivity. The XRD-analysis data of one of the bis-triazole derivatives supported the regioselectivity as well as the conformity of the method in the construction of the triazole nucleus. The preliminary antifungal profile against C. albicans was observed with cinnamaldehyde-based triazole derivatives demonstrating promising results.

}, keywords = {alpha, antifungal, beta-Unsaturated carbonyls, Cycloaddition, Dibenzalacetone, Triazole}, issn = {1434-193X}, doi = {10.1002/ejoc.202200317}, author = {Verma, Naimish K. and Bera, Smritilekha and Gonnade, Rajesh and Mondal, Dhananjoy} } @article {47769, title = {Regioselectivity in metalloradical catalyzed C-H bond activation: a theoretical study}, journal = {Journal of Organometallic Chemistry}, volume = {957}, year = {2022}, month = {JAN }, pages = {122179}, type = {Article}, abstract = {Pure quantum mechanical calculations were performed to find out the origin of regioselectivity under the metalloradical catalysis (MRC) by Co(II)-porphyrin, which showed regioselectivity is the inherent property of the aminyl radical generated from the sulfamoyl azide substrate. Different conformational analysis for the transition state from alpha-Co-III-aminyl radical to zeta-Co-III-alkyl radical formation have been studied to find out the most stable conformation for the preferable selectivity. The outcome of our study completely agrees with the reported experimental results. (C) 2021 Elsevier B.V. All rights reserved.}, keywords = {C-H activation, DFT, Metalloporphyrin, Metalloradical, Regioselectivity}, issn = {0022-328X}, doi = {10.1016/j.jorganchem.2021.122179}, author = {Mukherjee, Anirban and Singh, Ritesh and Mane, Kishor D. and Das, Gourab Kanti} } @article {48386, title = {Reinforcement of electrospun polyurethane fibers with resorcinol-formaldehyde resin}, journal = {Journal of Applied Polymer Science}, volume = {139}, year = {2022}, month = {MAY}, pages = {e52007}, type = {Article}, abstract = {

This work reports a simple method to improve the properties of electrospun nanofibers. The procedure involves developing nanofibers using electrospinning followed by liquid infiltration to reinforce the fibers. Coating of polyurethane nanofibers (PUN) with resorcinol-formaldehyde (RF) significantly improves the properties of PUN. Furthermore, the morphology of fiber interface and the properties of RF coated fibers indicate that RF resin reinforces the interface between the fibers. The method leads to improvement in mechanical properties of PUN. An improvement of about 94\% and 281\% in mechanical properties like tensile strength and modulus, respectively, compared to neat PUN fibers is achieved by coating with 20\% wt/vol of RF solution.

}, keywords = {Dynamic mechanical analysis, electrospinning, liquid infiltration, polyurethane, reinforced nanofibers, resorcinol-formaldehyde}, issn = {0021-8995}, doi = {10.1002/app.52007}, author = {Nair, Kiran Sukumaran and James, Nirmala Rachel} } @article {48037, title = {Remarkable effect of Fe and Se composition on magnetic properties-comparative study of the Fe-Se system at the nanoscale}, journal = {Journal of Physical Chemistry C}, volume = {126}, year = {2022}, month = {MAR}, pages = {4655-4663}, type = {Article}, abstract = {

Herein, for the first time, the correlation between the phase structure and the magnetic properties of the Fe-Se system has been presented for FexSey compounds-where x/y ranges from 1:2 to 1:1. These phases-orthorhombic (FeSe2), monoclinic (Fe3Se4), hexagonal (Fe7Se8), and tetragonal (beta-FeSe)-were synthesized using a one-pot thermal decomposition route at the nanoscale. The magnetic properties vary enormously with change in the Fe/Se ratio due to the change in the Fe2+/Fe3+ ratio, crystal field environment around the Fe ions, magnetocrystalline anisotropy, Fe vacancies, and so forth. Among the four Fe-Se phases studied, two of them, Fe3Se4 and Fe7Se8, are ferrimagnetic below similar to 300 K and show semihard magnetic properties. The other two phases FeSe2 and beta-FeSe exhibiting weaker magnetism are less known for their magnetic properties. All these phases are prone to surface oxidation despite surface passivation, and its effect on the magnetic moment will be pronounced for the phases with weak magnetization such as FeSe2 and beta-FeSe.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.1c10286}, author = {Ghalawat, Monika and Poddar, Pankaj} } @article {48100, title = {Research progress and perspective on lithium/sodium metal anodes for next-generation rechargeable batteries}, journal = {ChemSusChem}, volume = {15}, year = {2022}, month = {JUL}, pages = {e202200504}, type = {Review}, abstract = {

With the development of consumer electronic devices and electric vehicles, lithium-ion batteries (LIBs) are vital components for high energy storage with great impact on our modern life. However, LIBs still cannot meet all the essential demands of rapidly growing new industries. In pursuance of higher energy requirement, metal batteries (MBs) are the next-generation high-energy-density devices. Li/Na metals are considered as an ideal anode for high-energy batteries due to extremely high theoretical specific capacity (3860 and 1165 mAh g(-1) for Li and Na, respectively) and low electrochemical potential (-3.04 V for Li and -2.71 V for Na vs. standard hydrogen electrode). Unfortunately, uncontrolled dendrite growth, high reactivity, and infinite volume change induce severe safety concerns and poor cycle efficiency during their application. Consequently, MBs are far from commercialization stage. This Review represents a comprehensive overview of failure mechanism of lithium/sodium metal anode and its progress for rechargeable batteries through (i) electrolyte optimization, (ii) artificial solid-electrolyte interphase (SEI) layer formation, and (iii) nanoengineering at materials level in current collector, anode, and host. The challenges in current MBs research and potential applications of lithium/sodium metal anodes are also outlined and summarized.

}, keywords = {anode, Batteries, dendrite growth, Electrolytes, Energy storage}, issn = {1864-5631}, doi = {10.1002/cssc.202200504}, author = {Patrike, Apurva and Yadav, Poonam and Shelke, Vilas and Shelke, Manjusha} } @article {48080, title = {Reusable and efficient polystyrene immobilized ionic liquid catalyst for batch and flow methylation of hydroquinone}, journal = {Catalysis Letters}, volume = {152}, year = {2022}, month = {NOV}, pages = {3304-3316}, type = {Article}, abstract = {

An environmentally benign process for synthesizing 4-methoxyphenol through methylation of hydroquinone using polystyrene immobilized Bronsted acidic ionic liquid is presented. The catalyst has been characterized by several techniques, such as solid-state NMR, FTIR, and XRD. The morphological properties were analyzed through SEM and TEM analysis. The elemental analysis was performed using EDS and XPS techniques. The catalyst was thermally stable up to 603 K, which was confirmed by TGA. The chemical interaction between ionic liquid and polystyrene was confirmed by measuring the glass transition temperature of pure polystyrene and catalyst. The BET analysis was performed to estimate the catalyst{\textquoteright}s surface area, pore size, and pore volume. The recyclability of the proposed new catalyst was established up to five recycle runs in the batch mode. In addition, continuous flow experiments were conducted to test the catalytic activity in terms of catalyst life span and showed excellent stability up to 20 h. The rapid separation, long-term stability, and efficient recycling of synthesized polymeric catalysts make an excellent alternative to the commonly used homogeneous catalysts for selective O-methylation of hydroquinone reaction. The newly developed continuous process for synthesizing 4-methoxyphenol with 100\% selectivity suggests good opportunities to reduce energy consumption, which designates a cost-effective process. [GRAPHICS] .

}, keywords = {4-Methoxyphenol, Hydroquinone, O-methylation, Polystyrene immobilized ionic liquid}, issn = {1011-372X}, doi = {10.1007/s10562-022-03918-3}, author = {Bhongale, V. Priyanka and Joshi, Sunil S. and Mali, Nilesh A.} } @article {48226, title = {Review of recent progress in electrospinning-derived freestanding and binder-free electrodes for supercapacitors}, journal = {Coordination Chemistry Reviews}, volume = {460}, year = {2022}, month = {JUN }, pages = {214466}, type = {Review}, abstract = {

The versatile electrospinning technique is scalable and suitable to fabricate highly conducting freestanding carbon nanofiber composite electrodes for energy storage devices. Freestanding/flexible electrodes hold enormous potential for use in wearable electronic devices. Carbon-yielding polymers and the optimal use of sacrificial polymers, metal oxides, and sulfides retain the flexibility and enhance the surface area and pseudocapacitance of electrodes. Both as-prepared electrospun fibers and carbonized nanofibers are compatible with surface decoration via various chemical and electrochemical routes. Metal oxides/sulfides with various morphologies, such as nanocones and nanosheets, can be grown on the carbon nanofibers or on the as-prepared electrospun fibers using chemical synthesis methods such as electro-deposition, hydrothermal processes, and chemical impregnation to enhance the pseudocapacitance of the electrodes. Similarly, the deposition of metal organic frameworks on as-prepared electrospun fibers embellishes these fibers with nanostructures of specific morphologies such as dodecahedral and spindle-shaped structures. Under optimal conditions, these morphologies do not hamper the flexibility of the fibers, and binders are not required to retain them or maintain the electrode integrity. The engineering of electrodes with various morphologies and process parameters is presented systematically. Electrospinning-derived electrodes that have demonstrated significant electrochemical performance are highlighted and critically analyzed, and the energy storage mechanisms of these supercapacitors are described in detail. (C) 2022 Elsevier B.V. All rights reserved.

}, keywords = {Carbon nanofibers, Co-axial, composites, core-shell, electrospinning, Flexible, Porous, supercapacitor}, issn = {0010-8545}, doi = {10.1016/j.ccr.2022.214466}, author = {Joshi, Bhavana and Samuel, Edmund and Kim, Yong-il and Yarin, Alexander L. and Swihart, Mark T. and Yoon, Sam S.} } @article {48103, title = {Review on computational analysis of big data in breast cancer for predicting potential biomarkers}, journal = {Current Topics in Medicinal Chemistry}, volume = {22}, year = {2022}, month = {SEP}, pages = {1793-1810}, type = {Review}, abstract = {

Breast cancer is the most predominantly occurring cancer in the world. Several genes and proteins have been recently studied to predict biomarkers that enable early disease identification and monitor its recurrence. In the era of high-throughput technology, studies show several applications of big data for identifying potential biomarkers. The review aims to provide a comprehensive overview of big data analysis in breast cancer towards the prediction of biomarkers with emphasis on computational methods like text mining, network analysis, next-generation sequencing technology (NGS), machine learning (ML), deep learning (DL), and precision medicine. Integrating data from various computational approaches enables the stratification of cancer patients and the identification of molecular signatures in cancer and their subtypes. The computational methods and statistical analysis help expedite cancer prognosis and develop precision cancer medicine (PCM). As a part of case study in the present work, we constructed a large gene-drug interaction network to predict new biomarkers genes. The gene-drug network helped us to identify eight genes that could serve as novel potential biomarkers.

}, keywords = {Big data, Biomarkers, Breast cancer, Driver genes, Network analysis, text mining}, issn = {1568-0266}, doi = {10.2174/1568026622666220907121942}, author = {Shaikh, Nilofer and Bapat, Sanket and Karthikeyan, Muthukumarasamy and Vyas, Renu} } @article {48053, title = {Review on non-noble metal catalysts for glycerol hydrodeoxygenation to 1,2-propanediol with and without external hydrogen}, journal = {Green Chemistry}, volume = {24}, year = {2022}, month = {SEP}, pages = {6751-6781}, type = {Review}, abstract = {

The depleting petroleum oil resources, political embargos, and global warming dilemma have made it mandatory to develop alternative green technologies for energy and chemical production. Glycerol is one of the top-12 building block chemicals that can be mainly obtained as a coproduct of biodiesel production. The value addition of glycerol is only possible through its conversion to commodity and fine chemicals. Glycerol hydrogenolysis is one of the crucial pathways to produce several value-added products, among which 1,2-propanediol (1,2-PDO), 1,3-propanediol (1,3-PDO), ethylene glycol (EG) and 1-and/or 2-propanols are hydrogenolysis products. Selective glycerol hydrogenolysis to the desired product 1,2-PDO is only possible through the catalyst having an optimum combination of acid/base and metal sites (metallic and mixed oxides). The present review mainly focuses on the critical assessment of the influence of different supports, catalyst preparation methods, and/or pretreatment on structural, and electronic properties and simultaneously on the activity and product selectivity of non-noble metal catalysts. The role of reaction parameters in this industrially important reaction on catalyst performance will also be presented. A rigorous survey of patented literature on non-noble metal-catalyzed glycerol hydrogenolysis to 1,2-PDO is also discussed. Further, the review covers recent progress on non-noble metal-catalyzed autogenous glycerol hydrogenolysis through glycerol aqueous phase reforming (APR) and/or catalytic transfer hydrogenolysis (CTH), to overcome the cost and handling issues of external hydrogen. Finally, techno-economic analysis is also presented which compares the glycerol hydrogenolysis with and without external hydrogen with the conventional process of 1,2-PDO production. This analysis indicated that CTH and glycerol hydrogenolysis under ambient hydrogen pressure have the potential for commercialization, however catalyst stability and elimination of co-product formation at higher glycerol concentration need to be considered critically.

}, issn = {1463-9262}, doi = {10.1039/d2gc01879a}, author = {Mane, Rasika and Jeon, Yukwon and Rode, Chandrashekhar} } @article {48075, title = {Revisiting classical pummerer cyclization reaction: a key strategy for the synthesis of (+/-)-quinagolide}, journal = {ChemistrySelect}, volume = {7}, year = {2022}, month = {JUL}, pages = {e202201600}, type = {Article}, abstract = {

A formal synthesis of (+/-)-quinagolide using beta-alanine as a starting material has been achieved. Late stage intramolecular classical Pummerer reaction has been used as a key synthetic tool to construct octahydrobenzo[g]quinoline skeleton of quinagolide. Conjugative reduction of olefin, regioselective C-alkylation over O-alkylation of beta-ketoester followed by retro-Dieckmann/ Dieckmann reaction sequence has been used as a key reaction sequence to achieve prerequisite sulfoxide for the Pummerer reaction. While revisiting the classical Pummerer reaction, the one-pot sequential thionium ion induced cyclocarbamation followed by N-carbamate deprotection and Friedel-Crafts type Pummerer cyclization was observed as an important finding of the present work.

}, keywords = {Alkylation, Cyclocarbamation, Hyperprolactinemia, rearrangement, Thionium ion}, issn = {2365-6549}, doi = {10.1002/slct.202201600}, author = {Chavan, Subhash P. and Kawale, Sanket A. and Tripathi, Anupam and Kadam, Appasaheb L. and Gonnade, Rajesh G.} } @article {48216, title = {Role of 2D material families in energy harvesting: an editorial overview}, journal = {Journal of Materials Research}, volume = {37}, year = {2022}, month = {NOV }, pages = {3857-3864}, type = {Article}, abstract = {

The ever increasing proportion of an energy consuming society and the boost in industrialization accelerated the depletion of fossil fuel based energy sources at an alarming rate. This emphasizes the necessity of sustainable energy generation and storage to meet the daily energy demands. But, these alternative renewable energy sources like solar and wind power are intermittent and highly depend on weather, place and individuals. This creates the inevitability of suitable energy storage devices like batteries and supercapacitors. The interfacing of energy storing devices is required to maintain the supply chain equilibrium, power efficiency, regulate power fluctuations and reduce pollution. Besides, the boom in electric mobility and consumer electronics also require uninterrupted power supply. Hence, in the upcoming years the energy storing devices play a vital role in addressing the energy crisis. Innovations in new materials and technologies will be the core area of research and development in the coming future. 2D materials like graphene,transition metal carbides and nitrides (MXenes), transition metal borides (MBenes) and so on are the new class of materials among them MXenes are getting more attention in energy storage owing to its exceptional properties.

}, issn = {0884-2914}, doi = {10.1557/s43578-022-00721-z}, author = {Raghavan, Prasanth and Ahn, Jou-Hyeon and Shelke, Manjusha} } @article {46609, title = {Role of cysteines in accelerating Tau filament formation}, journal = {Journal of Biomolecular Structure \& Dynamics}, volume = {40}, year = {2022}, month = {JUN}, pages = {4366-4375}, type = {Article}, abstract = {

Alzheimer{\textquoteright}s disease is majorly associated with intracellular accumulation of Tau into paired helical filaments and tangles. The self-aggregated dimeric and oligomeric species of Tau formed are more toxic to neuronal cells and acts as seeds for filament formation. The two cysteine residues and the two hexapeptide regions of full-length Tau play a key role in initialization and filament formation during Tau aggregation. The role of cysteine residues in Tau aggregation has been studied by in-vitro aggregation assay that was measured by Thioflavin S fluorescence to observe the kinetics of aggregation. In this study, we have performed in-vitro aggregation assay with recombinant full-length Tau and the cysteine mutants to understand the mechanism of cysteine independent Tau aggregation. Here, we report that cysteine mutant full-length Tau can aggregate to form filaments under in-vitro conditions. To visualize the polymorphisms of Tau and cysteine mutants under different aggregation conditions anionic cofactor, heparin was employed. Wild-type Tau showed rapid aggregation to form oligomers and filaments. On the other hand, the cysteine mutant delayed the initial Tau aggregation. This indicates the importance of cysteine residues in accelerating initial Tau nucleation for its aggregation. The filament morphology of wild-type and cysteine mutant Tau has been characterized using transmission electron microscopy and high-resolution transmission electron microscopy. Communicated by Ramaswamy H. Sarma

}, keywords = {Heparin-induced aggregation, Paired helical filaments, Tau Aggregation, Tau Oligomers, tau protein}, issn = {0739-1102}, doi = {10.1080/07391102.2020.1856720}, author = {Chidambaram, Hariharakrishnan and Chinnathambi, Subashchandrabose} } @article {47656, title = {Role of facet in the competitive pathway of ethylene epoxidation}, journal = {Surface Science}, volume = {716}, year = {2022}, month = {FEB}, pages = {121954}, type = {Article}, abstract = {Ethylene epoxide (EtO) is used as raw material for a broad range of products from pharmaceuticals and plastics to paints and adhesives. Although the reaction of ethylene interacting with preadsorbed oxygen on Ag surface is known for decades, the underlying mechanism of EtO formation is not completely understood. Successful investigation of oxametallacycle (OMC) intermediate common to selective as well as non-selective pathways has ensured at least 50\% selectivity. The current study brings out the electronic signatures of distinct conformers of OMC stabilised on two different facets of Ag viz. (100) and (111). There are subtle differences between OMC conformers observed on these two facets with near-eclipsed on Ag(100) and near-staggered on Ag(111). A detailed analysis of Ag-O, C-O, C-C, and Ag-C interactions along with projected Density of States (pDOS) and projected Crystal Orbital Hamilton Population (pCOHP) imply towards ring closure on Ag(100) and hydrogen transfer on Ag(111). Finally, our understanding based on electronic and structural signatures are backed up by activation barriers computed through NEB calculations. Activation barrier for EtO is lower on (100) as compared to (111) facet. Thus, our study sheds light on how these differences between OMC affect the selectivity towards EtO.}, keywords = {Ag(100), Ag(111), DFT, epoxidation, Ethylene Oxide (EtO), OMC}, issn = {0039-6028}, doi = {10.1016/j.susc.2021.121954}, author = {Nair, Aathira and Kenge, Nivedita and Joshi, Kavita} } @article {48059, title = {Rongalite as a sulfone source: sulfonylation of para-quinone methides and alkyl/allyl halides}, journal = {Chemistry-an Asian Journal}, volume = {17}, year = {2022}, month = {AUG}, pages = {e202200408}, type = {Article}, abstract = {

A one-pot three-component reaction using p-quinone methides, rongalite and alkyl/allyl halides has been described. The corresponding unsymmetrical sulfones were obtained in good yields under mild reaction conditions in the absence of any metal, base or any other additive.

}, keywords = {Alkyl halides, diaryl methine, p-Quinone methide, rongalite, sulfonylation}, issn = {1861-4728}, doi = {10.1002/asia.202200408}, author = {Kale, Someshwar B. and Jori, Popat K. and Das, Utpal} } @article {48102, title = {Room temperature chemoselective hydrogenation of C=C, C=O and C=N bonds by using a well-defined mixed donor Mn(I) pincer catalyst}, journal = {Chemical Science}, volume = {13}, year = {2022}, month = {NOV }, pages = {13764-13773}, type = {Article}, abstract = {

Chemoselective hydrogenation of C=C, C=O and C=N bonds in alpha,beta-unsaturated ketones, aldehydes and imines is accomplished at room temperature (27 degrees C) using a well-defined Mn(I) catalyst and 5.0 bar H-2. Amongst the three mixed-donor Mn(I) complexes developed, kappa(3)-((PNNPyz)-P-R2-N-3)Mn(CO)(2)Br (R = Ph, Pr-i, Bu-t); the Bu-t -substituted complex ((PNNPyz)-P-tBu2-N-3)Mn(CO)(2)Br shows exceptional chemoselective catalytic reduction of unsaturated bonds. This hydrogenation protocol tolerates a range of highly susceptible functionalities, such as halides (-F, -Cl, -Br, and -I), alkoxy and hydroxy, including hydrogen-sensitive moieties like acetyl, nitrile, nitro, epoxide, and unconjugated alkenyl and alkynyl groups. Additionally, the disclosed method applies to indole, pyrrole, furan, thiophene, and pyridine-containing unsaturated ketones leading to the corresponding saturated ketones. The C=C bond is chemoselectively hydrogenated in alpha,beta-unsaturated ketones, while the aldehyde{\textquoteright}s C=O bond and imine{\textquoteright}s C=N bond are preferentially reduced over the C=C bond. A detailed mechanistic study highlighted the non-innocent behavior of the ligand in the ((PNNPyz)-P-tBu2-N-3) Mn(I) complex and indicated a metal-ligand cooperative catalytic pathway. The molecular hydrogen (H-2) acts as a hydride source, whereas MeOH provides a proton for hydrogenation. DFT energy calculations supported the facile progress of most catalytic steps, involving a crucial turnover-limiting H-2 activation.

}, issn = {2041-6520}, doi = {10.1039/d2sc05274a}, author = {Shabade, Anand B. and Sharma, Dipesh M. and Bajpai, Priyam and Gonnade, Rajesh G. and Vanka, Kumar and Punji, Benudhar} } @article {48118, title = {Room temperature Z-selective hydrogenation of alkynes by hemilabile and non-innocent (NNN)Co(ii) catalysts}, journal = {Catalysis Science \& Technology}, volume = {12}, year = {2022}, month = {MAR }, pages = {1843-1849}, type = {Article}, abstract = {

Hemilabile and phosphine-free quinolinyl-based NNN-type pincer and non-pincer cobalt complexes were developed for the room temperature catalytic transfer semi-hydrogenation of alkynes to Z-alkenes. Treatment of the quinolinyl-amine ligand, [C9H6N(NH)CH2CH2NEt2] ((NNN2NEt2)-N-Q-N-CH)-H with CoX2 afforded the pincer complexes kappa(3)-((NNN2NEt2)-N-Q-N-CH)CoX2 (X = Cl, Br), whereas, the quinolinyl-amide ligand, [C9H6N(NH)C(O)CH2NEt2] ((NNNNEt2)-N-Q-N-C(O))-H gave chelate anionic complexes kappa(2)-((NN)-N-Q)CoX2((NHNEt2)-H-C(O)) (X = Cl, Br). The well-defined anionic non-pincer cobalt complexes efficiently catalyzed the semi-hydrogenation of diverse alkynes to deliver highly chemoselective and stereodivergent Z-alkenes at room temperature. This hydrogenation exhibited broad substrate scope with the tolerance of sensitive functional groups, such as -Cl, -Br, -I, -OH, -NH2, -COOMe, and pyridinyl, employing a stable and user-friendly ammonia borane hydrogen source.

}, issn = {2044-4753}, doi = {10.1039/d2cy00027j}, author = {Sharma, Dipesh M. and Gouda, Chandrakant and Gonnade, Rajesh G. and Punji, Benudhar} } @article {48163, title = {Ru, Pd doped WO3 nanomaterials: a synergistic effect of noble metals to enhance the acetone response properties}, journal = {Ceramics International}, volume = {48}, year = {2022}, month = {JUN}, pages = {17923-17933}, type = {Article}, abstract = {

Noble metals (NMs) have an enormous impact on the intrinsic properties of the metal oxides. We report the synergistic effect of Ruthenium (Ru) and Palladium (Pd) noble metals on the enhancement of gas sensing properties of pure tungsten oxide (WO3). The gas sensing material is synthesized by simple and straight forward precipitation route, and its physico-chemical analyses are determined using XRD, FESEM, TEM/HRTEM, FFT, UV-Vis, XPS, EDAX, and BET measurements. Use of the developed material as a gas sensor is evaluated using several target gases (oxidizing as well as reducing), with acetone showing the best selectivity. The noble metal doping and hence catalytic action improved the gas response qualities. The synergistic effect of Ru and Pd on WO3 gas response properties are identified, where the effect is 99.80\% sensitivity, and lower response/recovery time (10 s and 2 min) at 300 degrees C operating temperature. Nonetheless, the sensors displayed better gas sensing properties even at lower operating temperatures ranging from 200 to 275 degrees C. In addition, the synergistic effect has displayed the dramatic enhancement in the sensitivity to 76.44\% at barely 10 ppm acetone concentration. This particular result will undoubtedly be helpful for diagnostic purpose of diabetic patients, and a strong candidate for prospective gas sensing applications, particularly acetone.

}, keywords = {Acetone vapours, Precipitation route, Ru -Pd doping, synergistic effect, WO3}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2022.03.065}, author = {Kodam, Pavan M. and Ghadage, Pandurang A. and Nadargi, Digambar Y. and Shinde, K. P. and Mulla, Imtiaz S. and Park, J. S. and Suryavanshi, Sharad S.} } @article {48703, title = {Radical cascade cyclization of unactivated alkene-tethered indoles with aryldiazonium salt and sodium metabisulfite to access Azo- and Sulfonylated-2,3-Dihyro-1H-pyrrolo[1,2-a]indoles}, journal = {Journal of Organic Chemistry}, volume = {88}, year = {2023}, month = {JUN}, pages = {9123-9129}, type = {Article}, abstract = {

A method for the construction ofheterocyclic scaffold2,3-dihyro-1H-pyrrolo[1,2-a]indolesvia arylsulfonylradical-triggered cascade cyclization of unactivated alkene-tetheredindoles in the absence of any external photocatalyst has been developed.This protocol features easily accessible starting materials such assodium metabisulfite and aryldiazonium tetrafluoroborates at roomtemperature and offers good functional group compatibility, enablingthe introduction of various functionalized sulfonyl and azo groupsinto pyrrolo[1,2-a]indoles.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.3c00759}, author = {Kumar, Pawan and Rai, Archana and Kumar, Manish and Krishna, Gamidi Rama and Das, Utpal} } @article {48718, title = {Rapid bioinspired N-acyliminium ion strategy for the ABC core of the stemona alkaloids}, journal = {Asian Journal of Organic Chemistry}, volume = {12}, year = {2023}, month = {SEP}, type = {Article}, abstract = {

A concise and highly diastereoselective bioinspired key cationic cyclization strategy for the asymmetric synthesis of the tricyclic core of the (-)-stemoamide, together with 8,9-bis-epi-stemoamide has been described. The key N-acyliminium ion precursors were accessed from L-tartaric acid and L-malic acid respectively. The use of ethyl acetoacetate derived bifunctional allylidenetriphenylphosphorane reagent in the early stage of the synthetic strategy is advantageous for the rapid construction of highly functionalized key pyrrolo[1,2-\& alpha;]azepine frameworks.

}, keywords = {alkaloids, Biomimetic synthesis, Claisen rearrangement, cyclization, Regioselectivity}, issn = {2193-5807}, doi = {10.1002/ajoc.202300331}, author = {Chavan, Subhash P. and Kalbhor, Dinesh B. and Gonnade, Rajesh G.} } @article {48289, title = {Reaction pathways and kinetics of N-acetyl-d-glucosamine hydrolysis in sub- and supercritical water}, journal = {New Journal of Chemistry}, volume = {8}, year = {2023}, month = {MAY }, pages = {1097-1108}, type = {Article}, abstract = {

Subcritical and supercritical water hydrolysis of N-acetyl-d-glucosamine (NAG) to value-added chemicals has been studied in detail. Experiments were carried out using a continuous flow reactor by varying temperature (250-400 degrees C), pressure (5-25 MPa) and residence time (2-60 s). A wide product distribution was obtained during the reactions, including solid, liquid and gaseous compounds, sensitive to the state of water: sub- or supercritical. Subcritical conditions promoted the formation of solid compounds, whereas gasification was favored in supercritical water. The prominent products present in the liquid fraction were glycolic acid, acetic acid, formic acid, 5-HMF and acetamide. The formation of a few distinct nitrogen-containing heterocyclic compounds was observed only in supercritical water. Following instantaneous deacetylation of NAG, several oxidation, reduction and secondary reactions occur during hydrolysis of NAG in subcritical and supercritical water. A kinetic model for the prediction of yields of acetic acid, glycolic acid and formic acid is developed. The network of reactions showed specifc deviations from conventional understanding. The current findings show that it is possible to develop a suitable process to make a set of value-added chemicals from chitinous biomass.

}, issn = {2058-9883}, doi = {10.1039/d3re00046j}, author = {Kulkarni, Sphurti P. P. and Joshi, Sunil S. S. and Kulkarni, Amol A. A.} } @article {48782, title = {Recyclable Pd nanoparticles immobilized on amine functionalized LDH for the Suzuki-Miyaura cross-coupling reaction}, journal = {Chemical Papers}, volume = {77}, year = {2023}, month = {SEP}, pages = {5555-5569}, type = {Article}, abstract = {

In the present work, we invented a Pd nanoparticle immobilized on an amine-functionalized LDH catalyst (PdNP@NH2LDH-Al-MCM-41) for cross-coupling reactions. The palladium was grafted onto the support by treating the Pd(OAc)(2) with NH2-LDH-Al-MCM-41 in acetone at room temperature. The prepared catalyst was characterized by FT-IR, SEM, TGA, TEM, and XPS techniques. The TEM characterization of the catalyst showed the uniform distribution of PdNPs with sizes ranging from 3 to 6 nm located inside the mesoporous. The Suzuki-Miyaura cross-coupling reaction was used to demonstrate the catalytic efficiency of the prepared PdNPs@NH2-LDH-Al-MCM-41 catalyst. The prepared and analyzed catalyst showed good to excellent activity in the Suzuki-Miyaura cross-coupling reaction of various aryl bromides with different aryl boronic acids in ethanol at 80 degrees C. The catalyst showed TON up to similar to 47 and TOF similar to 47 h(-1). The catalytic results exhibited that the catalyst is completely recoverable with simple filtration. The catalytic efficiency shows a slight decrease in activity for the Suzuki-Miyaura cross-coupling reactions even after five repeated recycles. TEM images of the freshly prepared and reused catalysts (after five catalytic cycles) showed palladium nanoparticles remain unchanged at the end of the reactions. [GRAPHICS] .

}, keywords = {LDH, PdNPs, Recyclability, Suzuki-Miyaura coupling}, issn = {0366-6352}, doi = {10.1007/s11696-023-02885-2}, author = {Patil, Seema P. P. and Jadhav, Sanjay N. N. and Inamdar, Firoz A. A. and Ameen, Mohd Aatif and Rode, Chandrashekhar V. V. and Rajmane, Archana S. S. and Kumbhar, Arjun S. S.} } @article {48955, title = {Regioselective synthesis of benzannulated [5,6]-oxaspirolactones via Cu(II)-catalyzed cycloisomerization of 2-(5-Hydroxyalkynyl)benzoates}, journal = {Journal of Organic Chemistry }, volume = {88}, year = {2023}, month = {NOV}, pages = {16915-16933}, type = {Article}, abstract = {

Spiroketals and oxaspirolactones are widely found in biologically active natural products, serving as important structural motifs. In this study, we present a Cu-(II)-catalyzed cascade cycloisomerization of 2-(5-hydroxyalkynyl)-benzoates, enabling the regioselective synthesis of benzannulated [5,6]-oxaspirolactones containing an isochromen-1-one moiety. This strategy offers a rapid and efficient approach to access a diverse array of benzannulated [5,6]-oxaspirolactones. The methodology presented here showcases a broad substrate scope, delivering good yields and scalability up to gram scale. The structures of the oxaspirolactones were unequivocally confirmed through single-crystal X-ray analysis and by analogy using H-1 and C-13-{H-1} NMR data.

}, keywords = {Construction, Isocumarins, Strategies}, issn = {0022-3263}, doi = {10.1021/acs.joc.3c01751}, author = {Thorat, Sagar S. and Shimpi, Sagar P. and Sambherao, Pooja I. and Krishna, Gamidi Rama and Kontham, Ravindar} } @article {48763, title = {Regulation of trehalose metabolism in insects: from genes to the metabolite window}, journal = {Glycobiology}, volume = {33}, year = {2023}, month = {MAY }, pages = {262-273}, type = {Review}, abstract = {

Trehalose is a major circulatory sugar in the haemolymph of insects. It provides instant energy and protection against stress. Trehalose metabolism is associated with insect growth and development. The architecture and spatio-temporal expression dynamics of trehalose metabolism and transport genes are key for regulation. These genes are controlled by various transcription factors, largely linked to nutrition, insect development, and metamorphosis. Also, trehalose levels are affected by substrate affinities and modifications of enzymes involved in the pathway. A feedback mechanism involving the precursors and products can regulate trehalose metabolism. Further, the neuroendocrine system controls trehalose levels under normal and stressed conditions by producing different hormones. Hypotrehalosemic hormones work under surplus energy conditions to activate haemolymph trehalose uptake and degradation. In contrast, hypertrehalosemic hormones stimulate trehalose production in the fat body and its transport to the haemolymph. However, trehalose metabolism regulation in insects needs to be studied in detail. This review discusses aspects of trehalose synthesis, transport, and degradation dynamics in developmental transition and stress response. Unraveling the epigenetic factors, transcriptional control and chemical or genetic modulators can provide further insights into the intricate regulation of trehalose in a development- and tissue-specific manner. This molecular information about effectors and regulators of trehalose metabolism can be applied in developing diverse biotechnological applications.

}, keywords = {Hormone, Insect development, Metabolic regulation, Stress, trehalose}, issn = {0959-6658}, doi = {10.1093/glycob/cwad011}, author = {Tellis, Meenakshi B. and Kotkar, Hemlata M. and Joshi, Rakesh S.} } @article {48334, title = {Relativistic coupled-cluster study of SrF for low-energy precision tests of fundamental physics}, journal = {Theoretical Chemistry Accounts}, volume = {142}, year = {2023}, month = {FEB}, pages = {15}, type = {Article}, abstract = {

SrF, being a laser-coolable molecule, can be an interesting system for spectroscopic tests of fundamental physics. We present an electronic structure study of this molecule within the four-component relativistic coupled-cluster singles and doubles (RCCSD) framework and employ the RCCSD-based methods to compute its molecular-frame dipole moment and core properties such as hyperfine structure coupling constant and molecular P, T-odd electronic structure parameters that are of great importance for the high-precision tests of fundamental physics. The impact of basis set size, Hamiltonian and nuclear model on the property calculation of SrF is also investigated. The computed results are in good agreement with the available experimental values. The present study shows that the SrF molecule could be useful for high-precision molecular experiments to explore physics beyond the Standard Model of elementary particles.

}, keywords = {Coupled cluster theory, CP violation, Hyperfine structure, Molecular spectroscopy, Relativistic effects}, issn = {1432-881X}, doi = {10.1007/s00214-023-02953-6}, author = {Talukdar, Kaushik and Buragohain, Haimyapriya and Nayak, Malaya K. K. and Vaval, Nayana and Pal, Sourav} } @article {49143, title = {Repurposing small molecules of Tephrosia purpurea against SARS-CoV-2 main protease}, journal = {Journal of Biomolecular Structure and Dynamics}, volume = {41}, year = {2023}, month = {SEP}, pages = {6822-6833}, type = {Article}, abstract = {

Coronavirus infection is a communicable disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) which emerged as a global pandemic with deteriorating effect on the world{\textquoteright}s population. Main protease (M-pro) of SARS-CoV-2 plays a significant role in the viral replication, transcription and disease propagation as well as a potential candidate for drug discovery and development for COVID-19 infection. The current study employed state of art structure-based drug discovery to decipher the role of phytochemicals of Tephrosia purpurea against M-pro. Tephrosia purpurea is being used as a traditional medicinal plant for the treatment of cough, breathlessness and fever as per the Indian Materia Medica. Screening of the phytochemicals of Tephrosia purpurea against M-pro was performed using molecular docking approach to identify the top 5 hits (+)-tephrorin B, deguelin, vitamin p, lanceolarin and 3beta-hydroxy-20(29)-lupene with binding energy of -8.4, -8.1, -8.0, -7.8, and -7.8 kcal/mol, respectively. Furthermore, identified top 5 hits were subjected to drug-likeness and toxicity prediction as well as MM-GBSA calculation. Out of the five molecules four molecules were predicted not to comprise any mutagenic and carcinogenic effects. Top two molecules based on the drug-likeness properties for oral bio-availability were further analysed by molecular dynamics simulation at 100 ns timescale. It was observed from the dynamic behaviour of the two complexes that the addition of these molecules changed the conformation and stability of the apo protein; thus may act as inhibitors for M-pro. Communicated by Ramaswamy H. Sarma

}, keywords = {molecular dynamics, SARS-CoV-2, Tephrosia purpurea}, issn = {0739-1102}, doi = {10.1080/07391102.2022.2112616}, author = {Sahoo, Rosaleen and Sahu, Parameswar and Swargam, Sandeep and Kumari, Indu and Behera, Banshidhar} } @article {48814, title = {Response of cardiac pulse parameters in humans at various inclinations via 360{\textdegree} rotating platform for simulated microgravity perspective}, journal = {NPJ Microgravity}, volume = {9}, year = {2023}, month = {JUL}, pages = {54}, type = {Article}, abstract = {

On the Earth, the human body is designed and adapted to function under uniform gravitational acceleration. However, exposure to microgravity or weightlessness as experienced by astronauts in space causes significant alterations in the functioning of the human cardiovascular system. Due to limitations in using real microgravity platforms, researchers opted for various ground-based microgravity analogs including head-down tilt (HDT) at fixed inclination. However, in the present study, an investigation of response of various cardiac parameters and their circulatory adaptation in 18 healthy male subjects was undertaken by using an indigenously developed 360 \& DEG; rotating platform. Cardiac pulse was recorded from 0 \& DEG; to 360 \& DEG; in steps of 30 \& DEG; inclination using piezoelectric pulse sensor (MLT1010) and associated cardiac parameters were analyzed. The results showed significant changes in the pulse shape while an interesting oscillating pattern was observed in associated cardiac parameters when rotated from 0 \& DEG; to 360 \& DEG;. The response of cardiac parameters became normal after returning to supine posture indicating the ability of the cardiovascular system to reversibly adapt to the postural changes. The observed changes in cardiac parameters at an inclination of 270 \& DEG;, in particular, were found to be comparable with spaceflight studies. Based on the obtained results and the proposed extended version of fluid redistribution mechanism, we herewith hypothesize that the rotation of a subject to head down tilt inclination (270 \& DEG;) along with other inclinations could represent a better microgravity analog for understanding the cumulative cardiac response of astronauts in space, particularly for short duration space missions.

}, doi = {10.1038/s41526-023-00301-3}, author = {Jagtap, Sagar and Kumar, Ajay and Mahale, Bhoopesh and Dixit, Jyotsana and Kalange, Ashok E. and Kanawade, Rajesh and Gangal, Shashikala and Vidyasagar, Pandit} } @article {48751, title = {Review on catalytic hydrogenation of biomass-derived furfural to furfuryl alcohol: recent advances and future trends}, journal = {Energy \& Fuels}, volume = {37}, year = {2023}, month = {JUL}, pages = {11475-11496}, type = {Review}, abstract = {

Biomass is one of the highly abundantrenewable resourcesavailablethat can be converted into several high-value-added products, includingchemicals, biofuels, and advanced materials. To achieve net-zero emissionsand improve biomass application, researchers around the world haverecently focused on expanding biomass processing techniques to value-addedproducts with the eventual goal of industrializing some of the products.In this review, we summarize lignocellulosic biomass derived furfural(FA) and its subsequent hydrogenation to furfuryl alcohol (FAL). Thiswork reviews the various types of hydrogenation catalysts and theirutility in the production of value-added products from FA. There willbe an increase in the demand for selective catalysts and process technologies,as well as an increase in the challenges during valorization, as theusage of biomass to achieve carbon neutrality increases. The reviewaims to provide a concise overview of the advancements in this fieldand the potential for sustainable FAL production. In this paper, wepresent a simple strategy for selecting catalyst systems and associatedprocess parameters that facilitate the highly efficient and selectivevalorization of FA to chemicals or fuel (bioadditives) for industrialuse.

}, issn = {0887-0624}, doi = {10.1021/acs.energyfuels.3c01174}, author = {Racha, Arundhathi and Samanta, Chanchal and Sreekantan, Sreejith and Marimuthu, Banu} } @article {48438, title = {Review on electrospun nanofibers for multiple biomedical applications}, journal = {Polymers for Advanced Technologies}, volume = {34}, year = {2023}, month = {JAN}, pages = {44-63}, type = {Review}, abstract = {

Electrospinning is a well-known technique since 1544 to fabricate nanofibers using different materials like polymers, metals oxides, proteins, and many more. In recent years, electrospinning has become the most popular technique for manufacturing nanofibers due to its ease of use and economic viability. Nanofibers have remarkable properties like high surface-to-volume ratio, variable pore size distribution (10-100 nm), high porosity, low density, and are suitable for surface functionalization. Therefore, electrospun nanofibers have been utilized for numerous applications in the pharmaceutical and biomedical field like tissue engineering, scaffolds, grafts, drug delivery, and so on. In this review article, we will be focusing on the versatility, current scenario, and future endeavors of electrospun nanofibers for various biomedical applications. This review discusses the properties of nanofibers, the background of the electrospinning technique, and its emergence in chronological order. It also covers the various types of electrospinning methods and their mechanism, further elaborating the factors affecting the properties of nanofibers, and applications in tissue engineering, drug delivery, nanofibers as biosensor, skin cancer treatment, and magnetic nanofibers.

}, keywords = {biomaterial, drug delivery, electrospinning, Nanofiber, tissue engineering}, issn = {1042-7147}, doi = {10.1002/pat.5896}, author = {Patel, Pratikshkumar R. and Gundloori, Rathna Venkata Naga} } @article {48925, title = {Rh-catalyzed asymmetric hydroformylation of olefins using phosphorus ligands}, journal = {Journal of chemical sciences }, volume = {135}, year = {2023}, month = {NOV }, pages = {108}, type = {Article}, abstract = {

Easily accessible BINOL-based monodentate phosphite ligand L1 and hybrid ligand L2 have been synthesized in good yield by following a one-pot, two-step protocol. A single 31P resonance at 146.6 ppm confirmed the formation of L1. Subsequent 1-2D NMR and mass spectrometric analysis authenticated the existence of L1. These ligands afforded excellent activity and regio-selectivity in the Rh-catalyzed AHF of styrenic substrates. L1 showed excellent regioselectivity but did not discriminate between the two enantiomers, while L2 displayed an enantiomeric excess (ee) of up to 20\%. In our attempts to understand the reasons for low ee, the coordination behavior of L2 was investigated. The coordination study revealed that L2 coordinates with the Rh as a monodentate ligand, although there are two P-sites. It was found that only the phosphine arm was coordinated to the Rh and the phosphite arm stayed away from the Rh core at the ambient temperature, leading to moderate ee.Graphical abstractOne-step synthesis of a phosphite (L1) and a phosphine-phosphite (L2) ligand and their implication in the asymmetric hydroformylation of olefins with excellent regioselectivity (\>95\%) and moderate enantioselectivity (up to 20\%) is reported.

}, keywords = {catalysis, coordination, Hydroformylation, Phosphine-phosphite ligand, Phosphite ligand}, issn = {0974-3626}, doi = {10.1007/s12039-023-02227-5}, author = {Kumar, Rohit and Sen, Anirban and Chikkali, Samir H.} } @article {48677, title = {Rh-catalyzed C-H functionalization of the (Pyrazol-5-yl)pyridine core of GBT-440}, journal = {Synthesis-Stuttgart}, volume = {55}, year = {2023}, month = {NOV }, pages = {3600-3609}, type = {Article}, abstract = {

The Rh-catalyzed cross dehydrogenative coupling (CDC)/alkylation of the pyrazolylpyridine unit of GBT-440 proceeded smoothly under ambient conditions and selectively on the pyrazole unit while directed by the pyridine. The scope of these reactions was established by employing simple as well as conjugated olefins for CDC and various diazo esters and the TIPS-EBX reagent for alkylation. At the outset, a focused small molecule library around the bis-heterocyclic core of GBT440 was developed via C-H functionalization.

}, keywords = {C-H activation, cross dehydrogenative coupling, diazo ester, GBT-440, Rh catalysis, TIPS-EBX}, issn = {0039-7881}, doi = {10.1055/a-2116-6734}, author = {Kalshetti, Rupali G. and Halnor, Swapnil V. and Ramana, Chepuri V.} } @article {48310, title = {Rheology and processing study on controlling material and process defects in polymer melt extrusion film casting using polymer blends}, journal = {Journal of Plastic Film \& Sheeting}, volume = {39}, year = {2023}, month = {APR}, pages = {211-240}, type = {Article}, abstract = {

The primary objective of this research paper is to control the material and process defects in polymer melt extrusion film casting (EFC) process for linear chain architecture polyethylene (PE) resins through polymer blending methodology. Extrusion film casting is a well-known industrially important manufacturing process that is used to manufacture thousands of tons of polymer/plastic films/sheets and coated products. In this research, the necking defect in an EFC process has been studied experimentally for a linear low density polyethylene (LLDPE) resin and attempts have been made to control its necking by blending in a long chain branched (LCB) low density polyethylene (LDPE) resin. The blending methodology is based on the understanding that a LDPE resin displays enhanced resistance to necking as compared to the LLDPE resin. It is found that added LDPE resin enhances necking resistance for the primary LLDPE resin. Further, as the LDPE concentration increases in the blend formulation, the necking is further reduced as compared to pure LLDPE. Analogous to past studies on EFC of linear and long chain branched architecture containing PEs, it is observed that as the LDPE is increased in the blend formulations, the formulations displayed enhanced melt elasticity and extensional strain hardening in rheological studies. It is concluded from this study that polyethylene resins having linear chain architecture can be made amenable to enhanced resistance to necking using appropriate amount of a long chain branched resins. Finally, process defects such as the draw resonance onset could be shifted to higher draw ratios as the LDPE level is increased in the LLDPE-LDPE blend formulation.

}, keywords = {Draw resonance, Extrusion, Film, linear chain, long-chain branched, melt elasticity, Necking, onset, strain hardening}, issn = {8756-0879}, doi = {10.1177/87560879221150764}, author = {Rokade, Dhammaraj and Patil, Prashant and Nandimath, Sheetal and Pol, Harshawardhan} } @article {48973, title = {Rhizospheric bacillus spp. exhibit miticidal efficacy against oligonychus coffeae (Acari: Tetranychidae) of tea}, journal = {Microorganisms}, volume = {11}, year = {2023}, month = {NOV}, pages = {2691}, type = {Article}, abstract = {

Oligonychus coffeae (Acari: Tetranychidae), popularly known as red spider mite (RSM) is one of the major pests of commercial tea (Camellia sinensis (L.) O. Kuntze) plantation world over. Many attempts have been made in the past to control this devastating pest using a variety of microbial bioagents, however, area-wise field success is very limited. We carried out an in vitro study to explore the potential of rhizospheric Bacillus spp. (B. amyloliquefaciens BAC1, B. subtilis LB22, and B. velezensis AB22) against O. coffeae through adulticidal and ovicidal activity. The 100\% adult and egg mortality was observed with bacterial suspension (1 x 10(9 )CFU/mL) by B. velezensis AB22, showing the lowest LC50 values for both adults and eggs of O. coffeae, i.e., 0.28 x 10(5) and 0.29 x 10(5), respectively. The study also throws some insights into the underlying mechanism through electron microscopy study and identification of some putative pesticidal metabolites from all the species. The three Bacillus species were observed to have four commonly secreted putative bioactive secondary metabolites, brevianamide A, heptadecanoic acid, thiolutin, and versimide responsible for their bio-efficacy against O. coffeae. The outcome of our study provides a strong possibility of introducing Bacillus spp. as a biological miticide and developing synthetic metabolites mimicking the mechanistic pathway involved in microbial bioefficacy.

}, keywords = {Bacillus spp., Biocontrol, organic tea, Secondary metabolites}, doi = {10.3390/microorganisms11112691}, author = {Bora, Popy and Gogoi, Sukanya and Deshpande, Mukund Vinayak and Garg, Pankaj and Bhuyan, Rana P. and Altaf, Nilofar and Saha, Nikita and Borah, Sapna Mayuri and Phukon, Mousumi and Tanti, Nabajit and Saikia, Bishal and Ahmed, Shenaz Sultana and Borah, Sanjib Ranjan and Dutta, Ashish and Sarmah, Bidyut Kumar} } @article {48472, title = {Rivaroxaban eutectics with improved solubility, dissolution rates, bioavailability and stability}, journal = {Crystengcomm}, volume = {25}, year = {2023}, month = {JUN }, pages = {3253-3263}, type = {Article}, abstract = {

Rivaroxaban (RXB) is a direct factor Xa inhibitor used for the treatment of deep vein thrombosis (DVT, a blood clot in the leg) and pulmonary embolism (PE, a blood clot in the lung) and to prevent blood clots in atrial fibrillation following hip or knee surgery. However, RXB suffers from poor solubility that hinders its broader application. Although its cocrystals are reported for solubility enhancement, the methodology used to prepare multi-component crystals is complex. Also, it uses hazardous solvents to develop cocrystals. We have prepared eutectics of RXB with caffeic acid (CAA), coumaric acid (CA), fumaric acid (FA), succinic acid (SA), mandelic acid (MA) and trimesic acid (TA) and analyzed them using hot stage microscopy (HSM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and fourier transform infrared spectroscopy (FTIR) techniques. The saturation solubility and dissolution rate profiles were also obtained to investigate the effect of eutectics on these parameters. Amongst all the coformers tested, coformers CAA, CA, and FA showed significant enhancement in the solubility of RXB. The powder dissolution rate of the eutectics showed considerable enhancement compared to that of RXB. In vivo pharmacokinetic study was carried out for RXB-CAA, RXB-CA and RXB-FA in rats and compared with RXB, which showed 1.5 and 1.4 times enhancement in relative bioavailability for RXB-CAA and RXB-CA, respectively. Stability studies were carried out as per ICH guidelines for all the eutectics, which revealed excellent stability over six months under accelerated (40 degrees C and 75\%) conditions and twelve months under long-term (30 degrees C and 60\% RH) conditions. The DFT studies carried out using the B3LYP/TZVP level of theory revealed higher Gibbs free interaction energy (Delta G(int)) for homosynthons (drugMIDLINE HORIZONTAL ELLIPSISdrug and coformerMIDLINE HORIZONTAL ELLIPSIScoformer) than heterosynthons (drugMIDLINE HORIZONTAL ELLIPSIScoformer).

}, doi = {10.1039/d3ce00261f}, author = {Shaligram, Parth S. and George, Christy P. and Sharma, Himanshu and Mahadik, Kakasaheb R. and Patil, Sharvil and Vanka, Kumar and Arulmozhi, S. and Gonnade, Rajesh G.} } @article {48287, title = {Robust optimization and characterization of MCM-41 nanoparticle synthesis using modified sol-gel method}, journal = {ChemistrySelect}, volume = {8}, year = {2023}, month = {MAR}, pages = {e202204968}, type = {Article}, abstract = {

Mesoporous silica nanoparticles (MSN) for drug delivery application requires great expertise to synthesize small sized monodisperse particles. We aimed at synthesizing and optimizing MCM-41 particles with the modified Stober{\textquoteright}s method by adjusting factors such as concentrations of cetyltrimethylammonium bromide (CTAB), sodium hydroxide (NaOH) and water (H2O) with respect to tetraethyl orthosilicate (TEOS), and a process parameter (stirring). We comprehended that the reactants determined the shape and size of both the particles and pores. Upon extensive characterization we report the synthesis of spherical particles of similar to 70 nm size in a monodisperse population; the structures had hexagonal ordered pores of diameter 3.071 nm and volume 3.124 cm(3)/g; the total surface area of 3410.648 m(2)/g of the particles was covered with silanol groups that aid in functionalization; the particles exhibited great thermal stability. Thus, the extensive optimization fabricated robust MCM-41 particles fit for drug delivery application.

}, keywords = {characterization technique, dynamic light scattering (DLS), mesoporous materials, Nanoparticles, sol gel processes}, issn = {2365-6549}, doi = {10.1002/slct.202204968}, author = {Shende, Rajnigandha A. and Chaudhari, Bhushan P.} } @article {49006, title = {Robust zeolitic tetrazole framework for electrocatalytic dopamine detection with high selectivity}, journal = {Inorganic Chemistry}, volume = {62}, year = {2023}, month = {NOV }, pages = {20236-20241}, type = {Article}, abstract = {

A novel zeolitic tetrazolate framework (ZTF-8) has been synthesized by solvent-free heat-assisted (70 C-degrees) mechanochemical grinding of zinc acetate and 5-methyl tetrazole in the presence of NaOH powder. The structure of ZTF-8 adopts the zeolitic sodalite (SOD) topology with uncoordinated N-heteroatom sites and resembles the structure of the well-known zeolitic imidazole framework ZIF-8. ZTF-8 is exceptionally stable in 0.1 M aqueous acid and base solutions for 60 days at 25 C-degrees. The unique structure with uncoordinated N-heteroatom active sites and exceptional stability of ZTF-8 facilitated the electrocatalytic oxidation of dopamine to dopamine quinone at neutral pH. Without any postsynthetic modification, ZTF-8 is directly used for the facile electrochemical detection of dopamine over a wide range of concentrations (5-550 mu M) with a high sensitivity (2410.8 mu A mM-1 cm-2). It also demonstrated promising selectivity over other interferents of similar oxidation potential, such as ascorbic acid and uric acid. The DFT study revealed that the ZTF-8 framework has a higher binding energy (-145.07 kJ/mol) and stronger interaction with dopamine than its isostructural ZIF-8 structure (-130.42 kJ/mol).

}, issn = {0020-1669}, doi = {10.1021/acs.inorgchem.3c03189}, author = {Sarfudeen, Shafeeq and Sruthi, Vadakke Purakkal and Maibam, Ashakiran and Panda, Premchand and Jhariat, Pampa and Senthilkumar, Sellappan and BabaRao, Ravichandar and Panda, Tamas} } @article {48478, title = {Role of ions and their transporters in combating salt stress in Pandanus odorifer (Forssk.) Kuntze}, journal = {Acta Physiologiae Plantarum}, volume = {45}, year = {2023}, month = {MAY}, pages = {66}, type = {Article}, abstract = {

Soil salinity is a major environmental constraint causing huge losses in crop production. Pandanus odorifer (Forssk.) Kuntze is an aromatic monocot plant species belonging to the family Pandanaceae, which grows naturally on the saline soils along the coasts of Asia, Southeast Asia, and Polynesia. The plants are dioecious and highly fertile, and the consistent saline sprays, strong winds, and severe soil salinity hardly affect their growth and fertility. Hence, understanding the mechanism of high salinity tolerance in P. odorifer could provide major advances in overcoming salinity stress in crop plants. In the present study, we analyzed control (0 M NaCl) and treated (1 M NaCl treatment for 3 weeks) plants of P. odorifer to understand the role of ion distribution, ion transport, and related mechanisms under salt stress. Using a combination of ionomics and transcriptomics approaches, we identified the molecular mechanisms contributing to the high salinity stress in P. odorifer. Under NaCl stress, there was a significant increase in Na, Cl, and other ions in leaves, while the concentrations of Si, Fe, Ni, and Ti decreased. Similarly, in roots, the levels of Na, Mg, Cd, and Cr were significantly high, while the levels of other ions decreased. Most of the genes related to ion transport and homeostasis, such as NHX1, CLC-C, SOS1, HAK, and ABC transporters, were upregulated in 1 M NaCl stress conditions. This study revealed that vacuolar sequestration of Na+ and the distribution of ions in the roots and shoots play significant roles in the salt-stress tolerance mechanism of P. odorifer.

}, keywords = {Ion transport, Ionomics, Pandanus, Salinity tolerance, Transcriptomics, Vacuolar sequestration}, issn = {0137-5881}, doi = {10.1007/s11738-023-03541-8}, author = {Rashmi, Deo and Ansari, Waquar A. and Kadoo, Narendra Y. and Barvkar, Vitthal T. and Deshmukh, Rupesh and Nadaf, Altafhusain B.} } @article {49329, title = {Rational design of zero-dimensional manganese(II) halide hybrids with suppressed melting temperatures}, journal = {JOURNAL OF PHYSICAL CHEMISTRY C}, volume = {128}, year = {2024}, month = {AUG }, pages = {14849-14859}, type = {Journal Article}, keywords = {ORGANIC-INORGANIC PEROVSKITES, TRANSITION}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.4c04444}, author = {Singh, Shivangi and Marayathungal, Jumana Hasin and Das, Deep Kumar and Khan, Akram Aadil and Bakthavatsalam, Rangarajan and Hathwar, Venkatesha R. and Kundu, Janardan} } @article {49429, title = {Rational monomer design for the synthesis of conjugated polymers by direct heteroarylation polymerization}, journal = {ACS Polymers Au}, volume = {4}, year = {2024}, month = {JUL}, pages = {449{\textendash}459}, type = {Article}, abstract = {

This study focuses on the design concepts that contribute to the C{\textendash}H activation in bithiophene-flanked monomers incorporating naphthalene diimide (NDI), perylene diimide (PDI), and fluorene (FLU) and their polymerization by direct heteroarylation. Density functional theory (DFT) calculations reveal distinct energy requirements for C{\textendash}H bond abstraction, which is dictated by the electron-withdrawing strength of the central aromatic core flanked by bithiophene. These provide insights into the reactivity of each monomer for C{\textendash}H bond activation. Proton NMR spectroscopic experimental results confirm the favorable energetic profiles predicted by DFT, with NDI- and PDI-flanked monomers exhibiting lower energy requirements than fluorene-flanked monomers. Successful polymer synthesis is demonstrated for NDI and PDI, while the fluorene-flanked monomer shows challenges due to its higher energy demands.

}, doi = {https://doi.org/10.1021/acspolymersau.4c00050}, author = {Kakde, Navnath R. and Sharma, Himanshu and Dalvi, Nitin V. and Vanka, Kumar and Asha, S. K} } @article {49270, title = {Reaction kinetics for catalytic hydrogenation of quinoline to decahydroquinoline as liquid organic hydrogen carrier}, journal = {International Journal of Hydrogen Energy}, volume = {92}, year = {2024}, month = {NOV}, pages = {102-112}, type = {Article}, abstract = {

The catalytic hydrogenation of quinoline to decahydroquinoline (DHQ) formation is studied for various parameters such as temperature, hydrogen pressure, reaction time, solvents, reactant-to-solvent ratio, and catalyst loading over 5\%Pd loaded on alumina (Pd/Al2O3) to obtain optimal reaction conditions. The hydrogen uptake of quinoline in the liquid phase reaction using isopropylalcohol (IPA) is studied in an autoclave reactor. The optimum reaction parameters of 50 bar H2 pressure and 175oC with reactant to solvent ratio of 1:9 for reaction time of 5 h are observed. The effect of IPA solvent showed that hydrogen uptake of 6.91 wt\% with complete hydrogenation of quinoline and DHQ yield of more than 99\% is observed. The reaction kinetic model is developed for a simplified reaction mechanism and is simulated using the Markov Chain Monte Carlo (MCMC) simulation tool to predict the rate constants and the experimental observations are validated with the model predictions. The activation energy for quinoline hydrogenation to py-THQ formation is estimated to be 136.57 kJ/mol. It is envisaged that quinoline hydrogenation to pz-THQ is the rate-limiting step in the DHQ formation.

}, keywords = {Decahydroquinoline (DHQ), Hydrogen uptake, Liquid organic hydrogen carrier (LOHC), Markov chain Monte Carlo (MCMC) simulation, Thermal screening unit (TSU), tool}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2024.10.247}, author = {Bagwan, Farahanaz M. and Kinage, Anil K. and Vasireddy, Satyam Naidu} } @article {49650, title = {Reaction of 4 (Alkynyloxy)cyclohexa-2,5-dienones with Dimethyl Sulfoxide: a catalyst-free formation of 6/5/3-fused tricyclic enones}, journal = {Journal of Organic Chemistry}, volume = {90}, year = {2024}, month = {DEC}, pages = {653-657}, type = {article}, abstract = {

6/5/3-Fused tricyclic enones were obtained when 4-(alkynyloxy)cyclohexa-2,5-dienones were treated with DMSO at 150 {\textdegree}C. The reaction proceeded via a four-membered oxathietene intermediate. The protocol developed is atom economical, has a broad substrate scope, and is amenable to gram-scale synthesis. The products obtained are susceptible to further synthetic transformations.

}, doi = {https://doi.org/10.1021/acs.joc.4c02553}, author = {Rai, Archana and Das, Utpal} } @article {49346, title = {Reactive distillation configuration for the production of ethyl acrylate}, journal = {CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION}, volume = {203}, year = {2024}, month = {SEP}, type = {Journal Article}, keywords = {ACETIC-ACID, CYCLOHEXYL ACETATE, Design, Dimethyl carbonate}, issn = {0255-2701}, doi = {10.1016/j.cep.2024.109864}, author = {Gore, Jayram I. and Mahajani, Sanjay M. and Mali, Nilesh A.} } @article {49227, title = {Ready access to [5,6,5]-Trioxa-spiro and fused ketals via ag-catalyzed cascade annulation of 4-pentyn-1-ols and aldehydes}, journal = {Organic Letters}, volume = {26}, year = {2024}, month = {AUG}, pages = {7116-7121}, type = {Article}, abstract = {

In this study, we unveil the versatility of 4-pentyn-1-ols as carbonyl surrogates for the unprecedented synthesis of diverse oxygen heterocycles, including [5,6,5]-bis-spiroketals (trioxadispiroketals) and [5,6,5]-furano-spiroketals related to bioactive natural products. These reactions commence with the pi-activation-induced intramolecular hydroalkoxylation of 4-pentyn-1-ols, yielding cyclic enol ethers, which undergo subsequent three-component annulation with aldehydes in a [2+2+1+1] fashion, resulting in the formation of [5,6,5]-bis-spiroketals. Notably, the distinctive steric features of alkynyl alcohols, particularly those with a secondary or tertiary alcohol functionality, dictate divergent reaction pathways, leading to the formation of [5,6,5]-furano-spiroketals.

}, issn = {1523-7060}, doi = {10.1021/acs.orglett.4c02357}, author = {Vinodkumar, Ramavath and Nakate, Ashwini K. and Gamidi, Rama Krishna and Kontham, Ravindar} } @article {49263, title = {Reconstituting the microstructural properties and ionic conductivity of copper - doped yttria-stabilized zirconia via mechanochemical synthesis for intermediate-temperature solid oxide fuel cell applications}, journal = {CERAMICS INTERNATIONAL}, volume = {50}, year = {2024}, month = {OCT }, pages = {35178-35192}, type = {Journal Article}, keywords = {ELECTRICAL-PROPERTIES, OPTICAL-PROPERTIES, THERMAL-STABILITY, TRANSITION-METAL}, issn = {0272-8842}, doi = {10.1016/j.ceramint.2024.06.326}, author = {Momin, Naeemakhtar and Manjanna, J. and Kobayashi, Satoru and Aruna, S. T. and Kumar, S. Senthil and Ahmad, Tokeer and Nayaka, G. P. and Mubeen, B. and Sabale, Sandip and Kangralkari, Mrunal V. and Keri, Rangappa S.} } @article {49070, title = {Reduced graphene oxide/tungsten oxide (rGO/WO3): a versatile nanocomposite for enhanced detection of acetone}, journal = {Journal of Materials Science-Materials In Electronics}, volume = {35}, year = {2024}, month = {FEB}, pages = {264}, type = {Article}, abstract = {

In this study, we report a straightforward method for synthesizing semi-cubical nanostructures of tungsten trioxide (WO3) loaded with reduced graphene oxide (rGO) via a hydrothermal approach. Furthermore, the systematic investigations were made towards the improved gas sensing capabilities of these nanostructures for acetone. The use of semi-cubical rGO/WO3 nanostructures demonstrate the provision of efficient gas diffusion routes via a meticulously arranged mesoporous framework. Hence, it leads to a significant improvement in the sensing response towards acetone. The analysis of the sensing capabilities demonstrates that the response of the sensor is influenced by variations in operating temperature and gas concentration. It is seen that the inclusion of rGO not only enhances the sensing response but also gives quick response and recovery, which are measured to be 12 and 33 s, respectively. The WO3 sensor loaded with 0.1 wt\% rGO demonstrates a discerning reaction to acetone, exhibiting a high response of 93.60\% than that of the unmodified WO3 sensor (76.30\%). The gas sensing properties are explained through the role of rGO and the structural and morphological properties of the developed nanostructures.

}, issn = {0957-4522}, doi = {10.1007/s10854-023-11869-7}, author = {Patil, Abhijeet P. and Gaikwad, Mayur A. and Nadargi, Jyoti D. and Shaikh, Hamid and Alam, Mohammad Asif and Tamboli, Mohaseen S. and Kim, Jin Hyeok and Mulla, Imtiaz S. and Suryavanshi, Sharad S.} } @article {49332, title = {Regio- and stereoselective construction of 1,3,5-triaroylcyclohexanes via KO t Bu-mediated cyclotrimerization of aryl vinyl ketones}, journal = {Journal of Organic Chemistry}, volume = {89}, year = {2024}, month = {NOV }, pages = {17207-17212}, type = {Article}, abstract = {

Herein, we disclose a simple one-pot method for an efficient regio- and stereoselective synthesis of 1,3,5-triaroylcyclohexanes from aryl vinyl ketones using potassium tert-butoxide. The developed protocol allows the construction of various symmetrically substituted cyclohexanes in good to excellent yields. The major product 2 also can be converted to the product 3 (all equatorial) conveniently by acid catalysis. This protocol features a good substrate scope and functional group compatibility.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.4c01695}, author = {Mahale, Sachin D. and Yadav, Vinita and Gonnade, Rajesh G. and Mhaske, Santosh B.} } @article {48945, title = {Regulating the polyethylene microstructure by increasing steric crowding in naphthoxy imine-ligated Ni(II) complexes}, journal = {Polymer Chemistry}, volume = {15}, year = {2024}, month = {JAN }, pages = {292-302}, type = {Journal Article}, abstract = {

Ligands play a prominent role in ethylene polymerization. However, it is a highly challenging task to regulate branching through ligand modifications. Here we report the synthesis of systematically sterically tailored naphthoxy imine-ligated nickel complexes (Ni1, Ni2, and Ni3), their performance in ethylene polymerization, and how the ligand steric controls branching in the resultant PE. Ni1-Ni3 were prepared in one step with an excellent yield (73-93\%). The identity of these complexes was unambiguously ascertained using H-1, C-13, 2D NMR spectroscopy, mass analysis, and single-crystal X-ray diffraction. The molecular structure revealed a cis arrangement of alkyl/aryl and donor groups (C-Ni-D), which is necessary for initiating ethylene polymerization. Buried volume contours suggested Ni3 to be sterically the most bulky among the three. When exposed to ethylene, the three nickel complexes Ni1, Ni2, and Ni3 produced polyethylene with excellent activity. As predicted by buried volume calculations, dibenzhydryl-substituted Ni3 outperformed sterically less crowded Ni1 and Ni2. Careful analysis of the resultant PE disclosed that sterically less encumbered Ni1 and Ni2 produce PE with high branching (43-54 branches/1000-C atoms) density. However, the bulkiest Ni3 revealed much lower branching (28 branches/1000-C atoms) and a high TOF of 35 400 mol of PE per mol of Ni per h, along with a high molecular weight of PE (61 000 Da). The steric bulk in Ni3, most likely, reduces chain-walking and thus lowers branching in the resultant PE. As compared to the literature-reported analogous Pd1 catalyst, the Ni3 catalyst discloses high TOF, high molecular weight, and less branched, linear polyethylene.

}, keywords = {Catalyzed Olefin Polymerization, High-Temperature, Molecular Weight}, issn = {1759-9954}, doi = {10.1039/d3py01010d}, author = {Birajdar, Rajkumar S. and Gonnade, Rajesh G. and Chikkali, Samir H.} } @article {49364, title = {Relaxation of the 2a1 ionized water dimer: an interplay of intermolecular Coulombic decay (ICD) and proton transfer processes}, journal = {Journal of Chemical Physics}, volume = {160}, year = {2024}, month = {JUN }, pages = {214302}, type = {Article}, abstract = {

This article investigates the relaxation dynamics of the ionized 2a(1) state of a water molecule within a water dimer. The study was motivated by findings from two previous pieces of research that focused on the relaxation behaviors of the inner-valence ionized water dimer. The present study discloses an observation indicating that water dimers display specific fragmentation patterns following inner-valence ionization, depending on the position of the vacancy. Vacancies were created in the 2a(1) state of the proton-donating water molecule (PDWM) and proton-accepting water molecule (PAWM). Utilizing Born-Oppenheimer molecular dynamics simulations, the propagation of the 2a(1) ionized state was carried out for both scenarios. The results revealed proton transfer occurred when the vacancy resided in the PDWM, accompanied by the closing of decay channels for O-H bond distance (RO-H) \> 1.187 \& Aring; (matching Richter et al.{\textquoteright}s findings). Conversely, when vacancy was on PAWM, we observed no closing of decay channels (aligning with Jahnke et al.{\textquoteright}s findings). This difference translates to distinct fragmentation pathways. In PDWM cases, 2a(1) state ionization leads to H3O+ -OH center dot formation. In contrast, PAWM vacancies result in decay pathways leading to H2O+-H(2)O(+ )products.

}, issn = {0021-9606}, doi = {10.1063/5.0199888}, author = {Kumar, Ravi and Ghosh, Aryya and Vaval, Nayana} } @article {49025, title = {Remarkable SO2 and H2S resistant ability on CO oxidation by unique Pd/WO3 3D hollow sphere nanocatalyst: correlating structure-activity relationships on SO2 exposure}, journal = {ACS Applied Energy Materials}, volume = {7}, year = {2024}, month = {JAN }, pages = {1476-1487}, type = {Article}, abstract = {

We report a simple inorganic route for synthesizing a Pd/WO3 3D hollow sphere nanocatalyst, where Pd nanoparticles are encapsulated and well distributed on porous tungsten oxide nanospheres. The synthesis protocol has advantages, as it requires no surfactant or stabilizing agent, Pd loading is easily tuned, and the as-synthesized nanomaterials can be directly used as catalysts for the CO oxidation reaction. The synthesized nanocatalyst exhibited 100\% CO to CO2 conversion efficiency at 260 degrees C. In addition, the nanocatalyst demonstrated remarkable SO2 (3 ppm) tolerance during the CO oxidation reaction for prolonged SO2 sulfation of 1-21 h at 260-400 degrees C. This represents the longest SO2 exposure time reported to date based on a single metal Pd/support-based nanocatalyst. No decrement in CO conversion efficiency was observed even after SO2 (3 ppm) treatment for 21 h for the first time based on a single metal Pd-based nanocatalyst. Moreover, the synthesized nanocatalyst shows H2S (4 ppm), even in situ H2S tolerance during the CO oxidation reaction at 260 degrees C for 1-3 h and exhibited less sensitivity to prolonged and stringent sulfur exposure, with the highest H2S concentration and maximum 100\% CO to CO2 conversion efficiency obtained after H2S treatment for the first time based on a Pd-based nanocatalyst to the best of our knowledge. The composition and structure of the R-Pd/WO3 nanocatalyst were not much influenced, even after the prolonged SO2 and H2S exposure during the CO oxidation reaction, as verified from spent catalyst analysis. Finally, our DFT-based model provides insights into understanding the observed sulfur resistance on Pd/WO3 by analyzing the underlying electronic structure. Therefore, our strategic synthesis methodology will open up many opportunities to select Pd/metal oxide-based nanomaterials for designing highly efficient, stable, and SO2/H2S-resistant nanocomposite catalyst.

}, keywords = {CO oxidation, DFT calculation, nanocatalyst, palladium (Pd), SO2 andH(2)S resistant ability, structure-activityrelationships, tungstenoxide (WO3)}, issn = {2574-0962}, doi = {10.1021/acsaem.3c02664}, author = {Jeyavani, Vijayakrishnan and Kondhekar, Deepali and Bhati, Meema and Dev, Sahil and Joshi, Kavita and Devi, R. Nandini and Mukherjee, Shatabdi Porel} } @article {49210, title = {Renewable synthesis of MoO3 nanosheets via low temperature phase transition for supercapacitor application}, journal = {SCIENTIFIC REPORTS}, volume = {14}, year = {2024}, month = {SEP }, pages = {20503}, type = {Journal Article}, keywords = {alpha-MoO3, h-MoO3, Mixed phases (h and alpha) of MoO3, Renewable green synthesis, Very low temperature phase transition}, issn = {2045-2322}, doi = {10.1038/s41598-024-69765-x}, author = {Sankar, K. N. Amba and Kesavan, Lokesh and Saha, Bikash and Jyolsnaraj, M. K. and Mohan, S. and Nandakumar, P. and Mohanta, Kallol and Kvarnstroem, Carita} } @article {48989, title = {Repurposing phytochemicals of Citrullus colocynthis against maltase-glucoamylase using molecular docking, MMGBSA, MD simulation and linear regression to identify potential anti-diabetic compounds}, journal = {Journal of biomolecular structure and dynamics}, volume = {42}, year = {2024}, month = {JUL }, pages = {5197-5206}, type = {Article}, abstract = {

Diabetes is a common lifestyle disorder found in populations of different age groups. Maltase-glucoamylase catalyses the release of the glucose molecule in the final enzymatic reaction of starch digestion; therefore, inhibition of maltase-glucoamylase is one of the approaches in the development of therapeutics for diabetes. Citrullus colocynthis is commonly recommended in Ayurveda for the treatment of diabetes. The current study applied a structure-based drug design approach to repurpose the phytochemicals of Citrullus colocynthis to identify potential inhibitors for maltase-glucoamylase. 70 phytochemicals of Citrullus colocynthis were screened against maltase-glucoamylase and top 5 molecules 8-p-hydroxybenzylisovitexin, isoorientin, cucurbitacin B, cucurbitacin E, and cucurbitacin I with significant binding energy of -10 kcal/mol, -9.9 kcal/mol, -9.6 kcal/mol, -9.2 kcal/mol, and -7.7 kcal/mol were identified. Furthermore, MMGBSA, pharmacokinetics properties and toxicity prediction were performed on the five identified molecules and top 3 molecules were selected for molecular dynamics (MD) simulation. It was observed from the structural flexibility and dynamic behaviour of the systems that conformational changes were noticed in the complexes as compared to its native state, which suggests that the 3 molecules, namely 8-p-hydroxybenzylisovitexin, isoorientin, and cucurbitacin I of Citrullus colocynthis may act as inhibitors for maltase-glucoamylase.Communicated by Ramaswamy H. Sarma

}, keywords = {Citrullus colocynthis, Diabetes, linear regression, molecular dynamics simulation, phytochemicals}, issn = {0739-1102}, doi = {10.1080/07391102.2023.2225107}, author = {Sahu, Parameswar and Sahoo, Rosaleen and Sahu, Abhishek Kumar and Saluja, Sundeep Singh and Behera, Banshidhar} } @article {49192, title = {Resorcinol-Azodianiline Covalent Organic Framework Supported FeOOH Quantum Dot-Catalyzed Electrochemical Ammonia Synthesis under Ambient Conditions}, journal = {CHEMISTRY OF MATERIALS}, volume = {36}, year = {2024}, month = {AUG}, pages = {8229-8238}, type = {Journal Article}, keywords = {conversion, nitrogen, Recent Progress, reduction}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.4c00859}, author = {Shekhar, Pragalbh and Kosugi, Kento and Singh, Himan Dev and Kushwaha, Rinku and Rase, Deepak and Matsuzaki, Takumi and Jain, Chitvan and Singh, Piyush and Singh, Yashraj and Vinod, Chathakudath Prabhakaran and Kondo, Mio and Masaoka, Shigeyuki and Vaidhyanathan, Ramanathan} } @article {48906, title = {Review on microbial 1, 3-propanediol production: Emerging strategies, key hurdles and attainable solutions to re-establish its commercial interest}, journal = {Industrial Crops and Products}, volume = {209}, year = {2024}, month = {MAR}, type = {Article}, abstract = {

1,3-propanediol (1,3-PDO) is a vital value-added bi-functional compound that has numerous uses in the industrial sector including the polymer, pharmaceutical, food, and cosmetics industries. 1,3-PDO biosynthesis from renewable resources through green methods has received considerable attention. However, technical difficulties such as low product titer, by-product accumulation, and incomplete substrate consumption impede its sustainable production at the industrial scale. Hence, understanding the overall 1,3-PDO process development with integrated knowledge of techno-economics would help to build more production facilities across the world. In this view, the biotechnological production of 1,3-PDO is systematically reviewed briefing the synthesis routes, microbial strains, metabolic pathways, and fermentation modes along with several purification strategies. The present review also summarizes key hurdles in 1,3-PDO production and discusses the attainable solutions to achieve higher product titer. Finally, the economic viability of 1,3-PDO biosynthesis is described based on the existing research.

}, keywords = {3-Propanediol, Fermentation processes, Glycerol, Purification strategies, Techno-economical assessment}, issn = {0926-6690}, doi = {10.1016/j.indcrop.2023.117961}, author = {Nimbalkar, Pranhita R. and Dharne, Mahesh S.} } @article {49440, title = {Review on the recent advances in the design and structure{\textendash}activity relationship of TiO2-based photocatalysts for solar hydrogen production}, journal = {Energy Advances}, volume = {3}, year = {2024}, month = {JUN}, type = {Article}, abstract = {

The major issues that determine the efficiency of photocatalyst composite materials for solar hydrogen production, with or without a sacrificial agent, are efficient visible light harvesting properties, efficient separation of charge carriers and their utilization of redox sites, and stability. Thus, significant efforts have been devoted in the past few decades to modify the above characteristics by integrating constituent components of composites using different approaches. In the present review, we aim to summarize the recent advances, predominantly, in the area of TiO2-based photocatalyst composites for solar hydrogen production. Firstly, we present the recent progress in material integration aspects by discussing the integration of TiO2 with different categories of materials, including noble/3d metals, metal oxides/sulphides/selenides, other low bandgap semiconductors, C-based materials, and dye sensitizers. Furthermore, we discuss how material integration helps in tailoring the electronic and optical properties for activity tuning in solar H2 production. Subsequently, critical changes in the physico-chemical and electronic properties of composites with respect to their preparation methods, morphology, crystallographic facets, particle size, dopant, calcination temperature, and structure{\textendash}activity relationship to solar hydrogen production are addressed in detail. Moreover, we discuss the importance of fabricating a photocatalyst in a thin film form and performing solar hydrogen production in different reactor set-ups for enhancing its photocatalytic performance, while addressing device scalability. Despite the significant advancements made in this field, solar-to-hydrogen conversion efficiency still needs to be improved to realise the practical application of solar hydrogen production. In this case, the direct conversion of water to hydrogen via overall water splitting and renewable H2 production from wastewater or biomass components by employing suitable photocatalysts are some possible ways to improve the energy efficiency, and continuous research in the above directions is highly desirable.

}, doi = {10.1039/D4YA00249K}, author = {Mani, Sunesh S. and Rajendran, Sivaraj and Mathew, Thomas and Gopinath, Chinnakonda} } @article {49002, title = {Robust spin liquidity in 2D metal-organic framework Cu3 (HHTP)2 with S=1/2 kagome lattice}, journal = {Chemistry- a european journal}, volume = {30}, year = {2024}, month = {JAN }, type = {Article}, abstract = {

On one hand electron or hole doping of quantum spin liquid (QSL) may unlock high-temperature superconductivity and on the other hand it can disrupt the spin liquidity, giving rise to a magnetically ordered ground state. Recently, a 2D MOF, Cu-3(HHTP)(2) (HHTP - 2,3,6,7,10,11-hexahydroxytriphenylene), containing Cu(II) S = 1/2 frustrated spins in the Kagome lattice is emerging as a promising QSL candidate. Herein, we present an elegant in situ redox-chemistry strategy of anchoring Cu-3(HHTP)(2) crystallites onto diamagnetic reduced graphene oxide (rGO) sheets, resulting in the formation of electron-doped Cu-3(HHTP)(2)-rGO composite which exhibited a characteristic semiconducting behavior (5 K to 300 K) with high electrical conductivity of 70 S . m(-1) and a carrier density of similar to 1.1 x 10(18) cm(-3) at 300 K. Remarkably, no magnetic transition in the Cu-3(HHTP)(2)-rGO composite was observed down to 1.5 K endorsing the robust spin liquidity of the 2D MOF Cu-3(HHTP)(2). Specific heat capacity measurements led to the estimation of the residual entropy values of 28 \% and 34 \% of the theoretically expected value for the pristine Cu-3(HHTP)(2) and Cu-3(HHTP)(2)-rGO composite, establishing the presence of strong quantum fluctuations down to 1.5 K (two times smaller than the value of the exchange interaction J).

}, keywords = {2D Metal-organic Framework, Electron doping, Reduced graphene oxide, Spin Liquid, Spin-frustration}, issn = {0947-6539}, doi = {10.1002/chem.202303718}, author = {Ninawe, Pranay and Jain, Anil and Sangole, Mayur and Anas, Mohd and Ugale, Ajay and Malik, Vivek K. and Yusuf, Seikh M. and Singh, Kirandeep and Ballav, Nirmalya} } @article {49396, title = {Role and significance of virus-bacteria interactions in disease progression}, journal = {Journal of Applied Microbiology}, volume = {135}, year = {2024}, month = {JUN}, pages = {lxae130}, type = {Review}, abstract = {

Understanding disease pathogenesis caused by bacteria/virus, from the perspective of individual pathogen has provided meaningful insights. However, as viral and bacterial counterparts might inhabit the same infection site, it becomes crucial to consider their interactions and contributions in disease onset and progression. The objective of the review is to highlight the importance of considering both viral and bacterial agents during the course of coinfection. The review provides a unique perspective on the general theme of virus-bacteria interactions, which either lead to colocalized infections that are restricted to one anatomical niche, or systemic infections that have a systemic effect on the human host. The sequence, nature, and underlying mechanisms of certain virus-bacteria interactions have been elaborated with relevant examples from literature. It also attempts to address the various applied aspects, including diagnostic and therapeutic strategies for individual infections as well as virus-bacteria coinfections. The review aims to aid researchers in comprehending the intricate interplay between virus and bacteria in disease progression, thereby enhancing understanding of current methodologies and empowering the development of novel health care strategies to tackle coinfections.

}, keywords = {Bacteria, coinfections, infections, virus, virus-bacteria interactions}, issn = {1364-5072}, doi = {10.1093/jambio/lxae130}, author = {Pokhrel, Vatsala and Kuntal, Bhusan K. and Mande, Sharmila S.} } @article {49044, title = {Role of aromatic alcohol additives on asymmetric organocatalysis reactions: insights from theory}, journal = {Chemistry-an asian jounrnal}, volume = {19}, year = {2024}, month = {FEB }, type = {Article}, abstract = {

The presence of an aromatic additive has been seen to enhance, often significantly, the enantioselectivity and yield in asymmetric organocatalysis. Considering their success across a dizzying range of organocatalysts and organic transformations, it would seem unlikely that a common principle exists for their functioning. However, the current investigations with DFT suggest a general principle: the phenolic additive sandwiches itself, through hydrogen bonding and pi \& sdot;\& sdot;\& sdot;pi stacking, between the organocatalyst coordinated electrophile and nucleophile. This is seen for a wide range of experimentally reported systems. That such complex formation leads to enhanced stereoselectivity is then demonstrated for two cases: the cinchona alkaloid complex (BzCPD), catalysing thiocyanation (2-naphthol additive employed), as well as for L-pipecolicacid catalysing the asymmetric nitroaldol reaction with a range of nitro-substituted phenol additives. These findings, indicating that dual catalysis takes place when phenolic additives are employed, are likely to have a significant impact on the field of asymmetric organocatalysis. The current DFT based study, on a wide range of organocatalysis systems, reveals a general principle by which phenolic additives influence asymmetric organocatalysis reactions. It is shown that the phenolic additive forms a sandwich complex, through hydrogen bonding and pi \& sdot;\& sdot;\& sdot;pi stacking interactions, with the organocatalyst coordinated electrophile and nucleophile, and enhances the enantioselectivity of the system as a result. image

}, keywords = {Additive, Asymmetric Organocatalysis, Cinchona Alkaloid, Density functional theory, Enantioselective Thiocyanation}, issn = {1861-4728}, doi = {10.1002/asia.202300997}, author = {Banerjee, Subhrashis and Vanka, Kumar} } @article {49080, title = {Role of nitrogen doping in modulating ruthenium nanocatalysts for enhanced electrochemical hydrogen evolution reaction in alkaline medium}, journal = {Chemistry of Materials }, volume = {36}, year = {2024}, month = {APR }, pages = {4262-4274}, type = {Article}, abstract = {

Nitrogen doping has become a fundamental approach to enhance the catalytic performance of carbon materials across various applications. The introduction of nitrogen creates defects and active sites, promoting the formation of small metal particles and strengthening the metal-support interaction within carbon materials. However, the challenge lies in developing sustainable and cost-effective methods for synthesizing nitrogen-doped carbon materials. In this study, we present a sustainable approach for the synthesis of ruthenium on nitrogen-doped carbon catalysts (Ru-CCP) using chitosan as a nitrogen and carbon source. Unlike traditional methods, our process avoids the use of additional nitrogen precursors and templates, streamlining the synthesis while using a renewable resource. The synthesized material exhibits an exceptional performance in the electrochemical hydrogen evolution reaction (HER) in alkaline conditions by achieving a current density of 25 mA cm(-2) at an impressively low overpotential of 46 mV, outperforming Pt/C under similar conditions. The detailed studies on structural and electronic properties of the materials using X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and transmission electron microscopy (TEM) revealed that the remarkable catalytic activity is upheld by the unique interplay between Ru delta+ and surface nitrogen moieties, notably pyridinic and pyrrolic nitrogen. Here, we demonstrate the control of particle size and electronic environment around the metal atom via the interaction of nitrogen and unravel the role of nitrogen doping in tuning the catalytic performance. In addition, this work offers insights into efficient HER catalyst design and emphasizes the potential of biomass-derived materials like chitosan in advancing clean hydrogen production for renewable energy applications.

}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.3c03169}, author = {Korampattu, Lavanya and Barik, Sidharth and Pandikassala, Ajmal and Urkude, Rajashri R. and Kurungot, Sreekumar and Dhepe, Paresh L.} } @article {49253, title = {Rongalite as a C1 source: sulfonylmethylation of indoles with aryl/alkyl hydrazides and sulfinates}, journal = {Journal of Organic Chemistry}, volume = {89}, year = {2024}, month = {JUL}, pages = {11347-11352}, type = {Article}, abstract = {

Herein, we present a sulfonylmethylation of indoles with aryl/alkyl hydrazides and sulfinates that provides viable access to sulfone compounds using rongalite as a C1 source. This protocol features readily available chemicals and simple operations, and the products were obtained in moderate to good yields.

}, issn = {0022-3263}, doi = {10.1021/acs.joc.4c01012}, author = {Kale, Someshwar B. and Patil, Tejaswini A. and Das, Utpal} } @article {49410, title = {Room temperature photocurable PEEK polymer formulations for high-performance 3D printing applications}, journal = {ACS Applied Engineering Materials}, volume = {2}, year = {2024}, month = {JUN}, pages = {1450{\textendash}1459}, type = {Article}, abstract = {

Digital light processing (DLP) technology was employed to 3D print acrylate-modified poly(ether ether ketone) (PEEK). PEEK and modified PEEK (mPEEK incorporating pendant pentadecyl chain) polymers were synthesized and end-capped with urethane acrylate units. These end-modified PEEK polymers were combined with commercially available (meth)acrylic cross-linkers and photoinitiator to create photocurable resin formulations suitable for DLP 3D printing. The resulting 3D-printed parts exhibited remarkable mechanical strength, with a Young{\textquoteright}s modulus of 2.1 GPa. This surpassed the mechanical properties of commercial acrylate resin 3D-printed parts and achieved approximately 55\% of the Young{\textquoteright}s modulus of reported commercial PEEK polymer. Notably, the thermal properties of the 3D-printed materials were impressive, including a high glass transition temperature of 140 {\textdegree}C and stability with only around 10\% weight degradation occurring at approximately 400 {\textdegree}C. These innovative resins demonstrated excellent printability with high resolution, enabling the fabrication of intricate shapes, including complex dental materials by DLP 3D printing. Their versatility extends to potential applications in dentistry, automobile manufacturing, and robotics.

}, doi = {https://doi.org/10.1021/acsaenm.4c00275}, author = {Pal, Shibam and Gaikwad, Yogesh and Asha, S. K.} } @article {49209, title = {Ru-catalyzed asymmetric transfer hydrogenation of racemic /3-keto γ-lactams via dynamic kinetic resolution}, journal = {Tetrahedron}, volume = {167}, year = {2024}, month = {NOV }, pages = {134293}, type = {Article}, abstract = {

The enantioselective transfer hydrogenation of racemic /3-keto gamma-lactams via dynamic kinetic resolution using a chiral Ru(II) catalyst has been developed for the synthesis of optically active /3-hydroxyl lactams with excellent conversion (up to 99 \%), high diastereomeric ratio (dr dr 93:07) and enantiomeric selectivity (89 \% ee ). The reaction proceeded by using HCO2H/Et3N 2 H/Et 3 N as hydrogen donor and features mild, additive free reaction conditions, fast crystallization, broad substrate scope, and an operationally simpler setup than that for molecular hydrogenation.

}, keywords = {(R)-1-((R)-Pyrrolidin-3-yl)ethan-1-ol, /3-keto gamma-lactams, Asymmetric transfer hydrogenation, Dynamic kinetic resolution, Fluroquinolone antibiotics}, issn = {0040-4020}, doi = {10.1016/j.tet.2024.134293}, author = {Malekar, V. Pushpa and More, V. Ganesh and Ramana, V. Chepuri} } @article {49645, title = {Ru/MgO-catalysed selective aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid}, journal = {Australian Journal of Chemistry - an International Journal for Chemical Science}, volume = {77}, year = {2024}, month = {SEP}, type = {Article}, abstract = {

Biomass valorisation through the selective oxidation of carbohydrate and lipid derivatives offers access to an array of platform chemicals through energy- and atom-efficient catalytic processes. Supported metal nanoparticles are promising catalysts for the aerobic selective oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), but typically require strong liquid base to achieve high selectivity. Here, we explore the utility of MgO as a solid base support for the Ru-catalysed aerobic oxidation of HMF, obtaining 68\% FDCA yield at 160{\textdegree}C and 1.5\ MPa of O2\ using \<1\ mol-\% metal.

}, doi = {https://doi.org/10.1071/CH24082}, author = {Lokhande, Priya and Dhepe, Paresh L. and Wilson, Karen and Lee, Adam F.} } @article {49579, title = {Rapid and efficient microwave-assisted synthesis of Mn-doped cesium bromide to phase engineered cesium manganese bromide nanocrystals with color-tunable RGB emission}, journal = {Journal of Materials Chemistry C}, volume = {13}, year = {2025}, month = {MAY}, pages = {9465-9473}, type = {Article}, abstract = {

Lead-free perovskite nanocrystals (NCs) have attracted considerable attention due to their excellent optoelectronic properties. However, they generally exhibit broadband emission with poor color purity. Similarly, obtaining tunable red/green/blue (RGB) emissions from lead-free perovskite NCs is highly desirable for several display applications. However, directly synthesizing lead-free perovskite NCs with tunable RGB emission and high color purity remains challenging. Herein, we have developed a simple and rapid microwave-assisted (MW-AT) synthesis strategy for synthesizing Mn-doped CsBr [Mn2+:CsBr] to phase engineering of non-toxic and stable all-inorganic cesium manganese bromide perovskite NCs in a nonpolar solvent with tunable blue-green-red emission color with high color purity. The phase transition was triggered by changing the MnBr2 concentration during the microwave synthesis: from Mn2+:CsBr (blue emission) to zero dimensional (0D) Cs3MnBr5 NCs (green emission) to one dimensional (1D) CsMnBr3 NCs (red emission). In addition, in a controlled moisture environment, both the 0D Cs3MnBr5 and 1D CsMnBr3 NCs were transformed into 0D Cs2MnBr42H2O NCs (blue emission), which could be inversely transformed back to their respective original phase via thermal annealing. Thus, our work highlights for the first time a rapid and efficient MW-AT synthesis strategy to obtain phase-pure tunable optical properties with high color purity from Mn-doped CsBr to cesium manganese bromide perovskite NCs via phase engineering, which can be further utilized in designing anti-counterfeiting and encryption materials for coding with high security and information concealment. Our work also provides a new avenue for exploring efficient MW-AT synthesis of other earth-abundant eco-friendly highly luminescent Pb-free perovskite NCs for future endeavors.

}, issn = {2050-7526}, doi = {10.1039/d5tc00215j}, author = {Sahu, Pragati and Mukherjee, Shatabdi Porel} } @article {49718, title = {Rapid and sensitive rGO/AuNP-based electrochemical nano-biosensor for detection of E. coli and S. aureus in less than an hour}, journal = {AIP Advances}, volume = {15}, year = {2025}, month = {MAY}, pages = {055236}, type = {Article}, abstract = {

Improved diagnostic screening has become critical for bacterial infection identification and prevention. The sensitivity, reliability, repeatability, detection time, and specificity of a test or tool are critical for its translation to application. Electrochemical detection methods are quick and can provide point-of-care diagnosis. We report on reduced graphene oxide/gold (rGO-AuNP) nanocomposites that enabled highly sensitive and quick detection of harmful bacteria, such as E. coli and S. aureus. The technique involved employing rGO as a nano-carrier and Au as a bioactive surface to bind particular antibodies for electrochemical immunoassays. The current approach is culture-independent and does not require sample processing for bacterial detection. It is a pathogen detection technology that uses rGO-AuNP as an electrochemical transducer platform and target particular antibodies for E. coli and S. aureus to obtain improved sensitivity and speed. Differential pulse voltammetry was used to detect infections. These findings demonstrated that rGO-AuNp nanocomposites have up to three times the sensitivity of rGO and AuNP alone. Importantly, the antibody linked bioactive screen-printed electrodes remained stable for more than a month, allowing just electrochemical measurements to be performed at the time of detection. This allowed for pathogen detection in less than an hour. The limit of detection for both E. coli and S. aureus was 2 CFU/ml, making it extremely sensitive. An electrochemical sensor was showing a linear response with R2 0.98. According to the physicochemical evaluation of nanocomposites, the improved sensitivity and stability were caused by a lowered bandgap in composites and uniform distribution of AuNPs on a rGO nano-template. (c) 2025 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International (CC BY-NC-ND) license (https://creativecommons.org/licenses/by-nc-nd/4.0/).

}, doi = {10.1063/5.0243093}, author = {Sirdeshmukh, Vedashree V. and Joglekar, Shreeram S. and Joshi, Preeti Nigam and Kale, Anup A.} } @article {49976, title = {Rapid biosynthesis of N-doped TiO2 nanoparticles using plant extract of Tamarix sp.: Its antimicrobial, anti-oxidant activity and dielectric properties}, journal = {Next Materials}, volume = {7}, year = {2025}, month = {APR}, pages = {100624}, type = {Article}, abstract = {

Green synthesis is a technique for the fabrication of\ nanoparticles\ (NPs) that is easy, eco-friendly, and emergent. It is currently garnering the attention of the scientific community worldwide since it is non-toxic, inexpensive, and reliable, and it takes place under ambient conditions. This research aimed to synthesize green N-doped\ titanium dioxide nanoparticles\ (N-TiO2) and analyze their antimicrobial, anti-oxidant activity, and\ dielectric properties. A leaf extract of\ Tamarix\ sp. was used in a single step at\ room temperature\ to fabricate N-TiO2nanoparticles\ with an average particle size of 26.5 nm. They were subsequently characterized by certain methods like Ultra Violet-Visible spectroscopy,\ Transmission Electron Microscopy,\ Field Emission Scanning Electron Microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier Transform Infra-Red Spectroscopy, etc. Moreover, the efficiency of the synthesized\ nanoparticles\ as antimicrobial agents was investigated against\ Bacillus subtilis,\ Escherichia coli\ and\ Aspergillus niger. Using 2, 2-diphenyl-1-picrylhydrazyl hydrate (DPPH), the antioxidant activity of synthesized N-TiO2nanoparticles\ (NPs) was evaluated. UV{\textendash}visible\ spectrophotometry\ was used to monitor the radical-scavenging activity of N-TiO2\ NPs. The\ dielectric properties\ were examined with the help of impedence analyzer and we observed high\ dielectric constant\ and very low tangent loss.

}, doi = {https://doi.org/10.1016/j.nxmate.2025.100624}, author = {Naqvi, Syed Mohd Adnan and Islam,Sk Najrul and Raza, Azam and Kshirsagar, Deepa and Chavan, Padmaja and Chankeshwara, Vishakha and Firdousi, Shakeel Ahmad and Ahmad , Absar} } @article {49791, title = {Rational design of hydrophobic Cu/CuO electrodes for electrochemical oxygenation of tetralin: a strategic approach}, journal = {ChemSusChem}, volume = {18}, year = {2025}, month = {AUG }, type = {Article}, abstract = {

Electro-organic synthesis presents a sustainable and practical alternative to traditional organic synthesis methods, which typically utilize harsh reagents and require energy-intensive conditions. Nevertheless, the challenge of achieving satisfactory conversion and selectivity rates in electrocatalytic oxidation using a non-platinum group metal (PGM) catalyst pair still needs to be addressed. This study demonstrates the application of a non-PGM-based catalyst pair for the electrocatalytic oxidation of tetralin to 1-tetralone, a highly demanded raw material in the pharma industry. Copper electrodeposited on teflonated carbon paper combined with copper foam as the electrocatalyst pair has demonstrated impressive conversion and selectivity ratios to electro-synthesize 1-tetralone at room temperature and atmospheric pressure. The optimal choice of a non-PGM catalyst, ideal mass loading, and a unique electrode configuration resulted in an ultimate conversion of about 99\% of tetralin and 1-tetralone selectivity -93.7\%, yield -92.6\%. The reaction pathway associated with the electrochemical phenomena is supported by first principles-based density functional theory calculations and X-ray photoelectron spectroscopy of the electrocatalyst. This process has exceptional performance that can be adapted for a wide range of substrates and is straightforward, ambient, reagent-free, scalable, and therefore beneficial for industrial use. Therefore, initiatives have been taken in this direction.

}, keywords = {C-H activation, Copper, electrochemical oxidation, non-PGM electrocatalysts, tetralin, Tetralone}, issn = {1864-5631}, doi = {10.1002/cssc.202501184}, author = {Cherukuthota, Sri Vidya and Mathew, Elizabeth and Verma, Tushar Singh and Joshi, Krati and Selvaraj, Kaliaperumal} } @article {49878, title = {Rational design of reduced graphene oxide/TiO2/gold nanorod nanocomposite for complete degradation of polystyrene microplastics in wastewater}, journal = {Advanced Sustainable Systems}, volume = {9}, year = {2025}, month = {AUG}, type = {Article}, abstract = {

Our planet is being devoured by plastic consumption every day. Water, soil, and air are deliberately polluted by the ingredients of these nondegradable plastics. Extensive usage of plastic has serious consequences in the environment, wildlife, and human health. A comprehensive approach to eradicate plastics from the planet is therefore imperative. Herein, a ternary nanocomposite subsumed of reduced graphene oxide (rGO), titanium dioxide (TiO2), and gold nanorods (AuNRs) is synthesized and effectively deployed to remove plastics from water as well as degradation of polymer film by both chemically and photocatalytically. The hydrothermally prepared nanocomposite completely removes polystyrene molecules from water, and 1.2 mg of plastic degradation is observed during the photolysis. Conversely, chemical degradation pathway induces the weight loss of 10.7 mg. Both Plasmon-induced interfacial charge transfer transition (PICTT) and Plasmon-induced hot electron transfer (PHET) assist the formation of reactive oxygen species (ROS) that collectively degrades the polymer strands. The spectrochemical and microscopic studies validate the degradation studies with cautious conclusions.

}, keywords = {chemical degradation, Photocatalysis, plasmonic hot electron, polystyrene microplastics, Reduced graphene oxide}, issn = {2366-7486}, doi = {10.1002/adsu.202500096}, author = {UshaVipinachandran, Varsha and Naveenkumar, K. and Haroon, Kabir Hussain Badagoppam and Ashokan, Indhumathi and Sinha, Arup and Maity, Pradip and Bhunia, Susanta Kumar} } @article {49923, title = {Ready access to benzodiazocines from tryptamines: a druggable scaffold toward antiviral agents}, journal = {ACS Medicinal Chemistry Letters}, volume = {16}, year = {2025}, month = {DEC}, pages = {2362-2367}, type = {Article}, abstract = {

Herein we report the first synthesis of the proposed structure of a benzodiazocine natural product, peganutonin A. Considering the druggable nature of benzodiazocine and its limited exploration in the field of medicinal chemistry, we generalized the approach and created a library of compounds useful for various biological activities. Key steps in present approach include tryptamine cyclization facilitated by tert-butyl hypochlorite and cleavage of the fused indole ring using ozonolysis. Preliminary screening of the synthesized compounds resulted in potent antiviral compounds against the SARS-CoV-2 virus.

}, keywords = {Benzodiazocine, drug discovery, Indole cleavage, Lipinski{\textquoteright}s rule of Five, SARS-CoV-2 inhibition, Tryptamine}, issn = {1948-5875}, doi = {10.1021/acsmedchemlett.5c00527}, author = {Saranya, N. Sathya Sai and Choudhury, Rahul and Routholla, Ganesh and Supekar, Prathmesh R. and R, Nandhakumaar and Martin, Alna Kuriyickal and Muruganandham, Renuga Devi and Kumar, Bokara Kiran and Reddy, D. Srinivasa} } @article {49586, title = {Real-time estimation of blood oxygenation parameters from human foot sole during leg elevation: a preliminary study with diffuse reflectance spectroscopy}, journal = {Optics and Laser Technology}, volume = {181}, year = {2025}, month = {FEB}, pages = {111706}, type = {Article}, abstract = {

This study investigated the applicability of diffuse reflectance spectroscopy (DRS) for real-time and non-invasive measurement of blood oxygenation parameters (BOPs) such as reduced hemoglobin (RHb), oxyhemoglobin (HbO(2)), and oxygen saturation (SO2) from human foot sole during leg elevation. Seventeen (17) healthy male subjects aged between 21 to 39 years were included in this study. Diffuse reflectance spectra were recorded from measurement sites namely the 5th metatarsal, ball of great joint, calcaneum, and great toe of the human foot sole w.r.t. leg elevation angles such as 0(0), 15(0), 30(0), 45(0), and 60(0), respectively. The localized BOPs were derived from the recorded spectra. In addition, blood hemodynamic parameters (BHPs) such as heart rate (HR), SO2, perfusion index (PI), systolic blood pressure (SBP), and diastolic blood pressure (DBP) were also measured for each elevating angle. To study and assess the changes in BOPs and BHPs w.r.t. leg elevation, a One-way ANOVA test followed by a Tukey HSD post-hoc test was performed. We observed a statistically significant increase in RHb (p \< 0.001) and a decrease in HbO(2) (p \< 0.001) after 45 degrees of leg elevation, however, there was no statistically significant difference in SO2 (p = 0.74) and HR (p = 0.84) for each measurement site w.r.t. leg elevation, respectively. Furthermore, PI (p \< 0.01), ankle SBP (p \< 0.001) and DBP (p \< 0.001) were decreased w.r.t. leg elevation. The obtained results are in agreement with the literature. The preliminary results suggest that DRS has the potential for real-time estimation of BOPs from the local sites of healthy human foot soles during leg elevation. Thus, it opens the possibility of DRS to monitor and evaluate the diagnosis and treatment of ischemia and edema during leg elevation of patients through BOPs measurement.

}, keywords = {diabetic foot ulcer, diffuse reflectance spectroscopy, Leg elevation, Oxygen saturation, Oxyhemoglobin, Reduced hemoglobin}, issn = {0030-3992}, doi = {10.1016/j.optlastec.2024.111706}, author = {Kumar, Ajay and Lohchab, Viney and Pawar, Dnyandeo and Someshwar, Vimal and Mathe, Vikas and Husale, Sudhir and Kanawade, Rajesh} } @article {49593, title = {Recommendations for sample selection, collection and preparation for NMR-based metabolomics studies of blood}, journal = {Metabolomics}, volume = {21}, year = {2025}, month = {MAY}, pages = {66}, type = {Review}, abstract = {

BackgroundMetabolic profiling of blood metabolites, particularly in plasma and serum, is vital for studying human diseases, human conditions, drug interventions and toxicology. The clinical significance of blood arises from its close ties to all human cells and facile accessibility. However, patient-specific variables such as age, sex, diet, lifestyle and health status, along with pre-analytical conditions (sample handling, storage, etc.), can significantly affect metabolomic measurements in whole blood, plasma, or serum studies. These factors, referred to as confounders, must be mitigated to reveal genuine metabolic changes due to illness or intervention onset.Review objectiveThis review aims to aid metabolomics researchers in collecting reliable, standardized datasets for NMR-based blood (whole/serum/plasma) metabolomics. The goal is to reduce the impact of confounding factors and enhance inter-laboratory comparability, enabling more meaningful outcomes in metabolomics studies.Key conceptsThis review outlines the main factors affecting blood metabolite levels and offers practical suggestions for what to measure and expect, how to mitigate confounding factors, how to properly prepare, handle and store blood, plasma and serum biosamples and how to report data in targeted NMR-based metabolomics studies of blood, plasma and serum.

}, keywords = {Blood, Metabolites, Metabolomics, NMR, Plasma, Serum, Standardization}, issn = {1573-3882}, doi = {10.1007/s11306-025-02259-7}, author = {Emwas, Abdul-Hamid and Zacharias, Helena U. and Alborghetti, Marcos Rodrigo and Gowda, G. A. Nagana and Raftery, Daniel and Mckay, Ryan T. and Chang, Chung-ke and Saccenti, Edoardo and Gronwald, Wolfram and Schuchardt, Sven and Leiminger, Roland and Merzaban, Jasmeen and Madhoun, Nour Y. and Iqbal, Mazhar and Alsiary, Rawiah A. and Shivapurkar, Rupali and Pain, Arnab and Shanmugam, Dhanasekaran and Ryan, Danielle and Roy, Raja and Schirra, Horst Joachim and Morris, Vanessa and Zeri, Ana Carolina and Alahmari, Fatimah and Kaddurah-Daouk, Rima and Salek, Reza M. and LeVatte, Marcia and Berjanskii, Mark and Lee, Brian and Wishart, David S.} } @article {49525, title = {Recovery of intercalated Li and synthesis of reduced graphene oxide from graphite of spent Li-ion battery for supercapacitor application}, journal = {Inorganic Chemistry Communications}, volume = {177}, year = {2025}, month = {JUL}, pages = {114371}, type = {Article}, abstract = {

Spent Li-ion batteries (LIBs) are accumulating rapidly across the world. Anode portion of spent LIBs is comprised of graphite with a significant amount of intercalated Li. Thus, it serves as an important secondary resource of Li. Therefore, this study is focused on the eco-friendly recovery of Li from anode graphite and the conversion of recovered graphite (RG) into reduced graphene oxide (rGO) for its application in supercapacitors. The spent graphite (SG) was dissolved in 0.5 M oxalic acid with a solid-liquid ratio of 50 g L- 1 at 70 degrees C for about 90 min. Under given condition, 100 \% Li was extracted from graphite. The dissolved Li was successfully recovered as Li2CO3. Further, RG was used as a precursor for the synthesis of GO and then converted to rGO by reduction with gallic acid under microwave irradiation. As synthesized rGO was used as an electrode material for supercapacitor application. The rGO electrode exhibited highest specific capacitance of 1211 F g- 1 at a current density of 4 mA cm- 2. It showed energy density 168.2 W h kg- 1 and power density 1000 W kg- 1 with stability up to 2000 cycles (90 \% retention). Further, asymmetric solid-state device (rGO//activated carbon) was fabricated with polyvinyl alcohol - H2SO4 as electrolyte. It exhibited high energy density of 94 W h kg- 1 at a power density of 1200 W kg- 1 and cycling stability up to 1500 cycles with 86.20 \% capacity retention. Hence, rGO synthesized from spent LIB provides an excellent electrode material for construction of supercapacitor devices.

}, keywords = {Graphite anode, Lithium recovery, Recovered graphite, rGO synthesis, Spent Li-ion battery, supercapacitor}, issn = {1387-7003}, doi = {10.1016/j.inoche.2025.114371}, author = {Uppin, Bhagyashree and Sankannavar, Rohini and Kangutkar, Raju S. and Manjanna, Jayappa and Kolekar, Sanjay and Nayaka, Girish P.} } @article {49701, title = {Recycling textile dyeing effluent through ozonation: an environmentally sustainable approach for reducing freshwater and chemical consumption and lowering operational costs}, journal = {Journal of Cleaner Production}, volume = {510}, year = {2025}, month = {JUN}, pages = {145641}, type = {Article}, abstract = {

Dyeing operations in textile industries require large quantities of freshwater, which creates handling challenges and generates wastewater with high organic load that is difficult to treat and incurs high treatment costs. Minimizing freshwater consumption is essential for adopting sustainable practices. A limited number of studies are available in the literature exploring the possibility of recycling dyeing effluent through ozonation as an ecofriendly approach. Therefore, in the present work, the recycling of effluents obtained after dyeing with Reactive Red 198 (RR198) and Reactive Blue 21 (RB21) dyes through ozonation treatment has been studied. Nearly complete decolourization with COD removal efficiency of 32 \% was obtained for both dye effluents after 15 min of ozonation. The qualities of recycled dyed fabrics were compared to fresh water-dyed fabrics through spectrophotometric analysis and colour fastness tests. These qualities for both dyed fabrics with recycled effluent were found to be either in excellent or good category after each recycle. Comparative analysis of freshwater and chemical requirements, along with cost savings, was conducted over four dyeing attempts. The study revealed significant savings with recycled effluent dyeing including 60 \% reduction in fresh water usage and 75 \% in salt consumption compared to conventional freshwater dyeing. Thus, recycling textile dyeing effluent through ozonation treatment was found to be a resource efficient approach. This approach not only significantly reduces wastewater volumes but also freshwater demand without compromising the colour-related qualities of dyed fabrics. Additionally, it minimizes operational expenses, thereby, supporting textile industry{\textquoteright}s shift toward sustainable practices.

}, keywords = {Chemical saving, Freshwater consumption, Ozonation, Recycling, Textile industry effluent}, issn = {0959-6526}, doi = {10.1016/j.jclepro.2025.145641}, author = {Deogaonkar-Baride, Smita and Koli, Mitesh and Ghuge, Santosh P.} } @article {49921, title = {Regio selective synthesis of pyrazole derivatives of 5-chloro-2-methoxy phenyl hydrazide and their biological evaluation}, journal = {Journal of Heterocyclic Chemistry}, volume = {62}, year = {2025}, month = {APR}, pages = {325-329}, type = {Article}, abstract = {

Present study involves synthesis of derivatives of (5-chloro-2-methoxyphenyl) (5-alkyl-3-(substituted) (phenyl/alkyl)-1H-pyrazol-1-yl) methanones. Structural elucidation of the synthesized compounds was depicted by the data of 1H and 13C NMR, IR, and Mass spectral analysis. The newly synthesized compounds 1a-1d and 2a-2i were screened in vitro against Mycobacterium tuberculosis H37Ra using an established XRMA protocol. Among the screened compounds, 2d, 2f, and 2h showed good percent inhibition against the active stage of M. tuberculosis H37Ra 80.77, 55.70, and 79.54, respectively, at 30 mu g/mL of inhibitor concentration. Further in secondary screening, compound 2d exhibited significant antitubercular activity on the active stage of M. tuberculosis H37Ra with IC50 of 0.208 mu g/mL. The synthesized compounds were also screened for antibacterial activity and found no significant activity against Gram-positive Bacteria Bacillus subtitles and Staphylococcus aureus and Gram negative bacteria Pseudomonas aeruginosa and Escherichia coli at 30 mu g/mL, which confirms the specificity of inhibitory activity against M. tuberculosis and more selectively against the active stage. The present study will be helpful for the further development of these molecules into antitubercular lead candidates.

}, keywords = {5-chloro-2-methoxy phenyl hydrazide, antibacterial activity, Antitubercular activity, Biological evaluation, H37Ra, hydrazide, Pyrazole}, issn = {0022-152X}, doi = {10.1002/jhet.4941}, author = {Bavishi, Abhay and Vala, Hardev and Swami, Sagar and Thakrar, Shailesh and Shah, Anamik and Sarkar, Dhiman} } @article {49568, title = {Regioisomeric π-extended nanographene with long-lived phosphorescence afterglow}, journal = {Angewandte Chemie-International Edition}, volume = {64}, year = {2025}, month = {FEB}, pages = {e202422125}, type = {Article}, abstract = {

The cutouts of graphene sheets, particularly those with a nonplanar topology, present vast opportunities for advancement. Even a slight deviation from the planar structure can lead to intriguing (chiro)optical features for helically twisted nanographenes. In this context, we introduce two regioisomeric pi-extended nanographenes that exhibit distinct excited-state characteristics. The helicene structure and the photophysical features can be easily tuned by changing the connecting position of the nanographene to the carbazole core (2,7- and 3,6-). Single-crystal X-ray diffraction analysis confirmed the formation of nanographenes with bent and helical conformations. Both derivatives exhibited thermally activated delayed fluorescence at room temperature and phosphorescence at low temperatures. Notably, the nanographene with the bent structure displayed an impressive red afterglow lasting over 30seconds, in contrast to the very weak afterglow observed in the helical structure. DFT calculations revealed the existence of an isoenergetic higher triplet state (T-8) and comparatively weak spin-orbit coupling (T-1-S-0), thereby enabling the bent nanographene to exhibit a long-lived component and strong afterglow. Our findings highlight the significance of regioisomeric nanographenes with exceptional optical properties and offer a deeper understanding of the structure-property relationship in nonplanar nanographenes.

}, keywords = {Afterglow, CPL, Helicenes, nanographene, Phosphorescence, TADF}, doi = {10.1002/anie.202422125}, author = {Kumar, Viksit and Venugopal, Geethu and Jadhav, Ashok Badrinarayan and Dongre, Sangram D. and Gonnade, Rajesh and Kumar, Jatish and Ruer, Paul C. and Hupp, Benjamin and Steffen, Andreas and Babu, Sukumaran Santhosh} } @article {49698, title = {Regioselective difluoroalkylation of 2-pyridones with fluoroalkyl bromides enabled by a nickel(II) catalyst}, journal = {Chemistry-An Asian Journal}, volume = {20}, year = {2025}, month = {MAY}, type = {Article}, abstract = {

Regioselective C-H difluoroalkylation of diverse 2-pyridones with ethyl bromodifluoroacetates and bromodifluoroacetamides is accomplished by using a (dppf)NiCl2 catalyst under mild conditions. This efficient protocol could deliver a variety of C-3 difluoroalkylated pyridones with the tolerance of a range of highly susceptible functionalities, such as -Cl, -Br, -I, -COMe, -CN, -NMe2 and -NO2, including heteroarenes like pyridinyl, furanyl, thiophenyl and carbazolyl moieties. A preliminary mechanistic study suggests the radical pathway for the reaction involving fluoroalkyl radical intermediate.

}, keywords = {2-pyridones, Difluoroalkylation, Nickel, radical intermediate, Regioselectivity}, issn = {1861-4728}, doi = {10.1002/asia.202401870}, author = {Pradhan, Chandini and Khandelwal, Disha and Punji, Benudhar} } @article {49997, title = {Reimagining CO2 management: SWOT analysis and global outlook on CCUS and ICCU technologies}, journal = {Sustainable Chemistry for Climate Action}, volume = {7}, year = {2025}, month = {DEC}, pages = {100139}, type = {Article}, abstract = {

The persistent rise in atmospheric CO2\ levels, driven by industrialization and fossil fuel dependence, has made carbon dioxide a central target in global climate mitigation efforts. Despite its thermodynamic stability and linear geometry, which make its activation inherently difficult, CO2\ has long been identified as a major greenhouse gas since the mid-20th century. This review presents a comprehensive outlook on Carbon Capture, Utilization, and Storage (CCUS) technologies, with a focused discussion on Integrated Carbon Capture and Utilization (ICCU) approaches. We begin with a brief historical and scientific background on CO2\ as a greenhouse gas and the pressing need to curb emissions. A critical evaluation of various capture technologies-post-combustion, pre-combustion, oxy-fuel, and direct air capture is provided, highlighting their principles, merits, and limitations. The current global landscape of CCUS infrastructure, including pilot, commercial, and developing-scale operations, is summarized. A SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis is presented to assess the viability of CCUS pathways. Particular emphasis is placed on CO2\ capture mechanisms via absorption (liquid solvents like amines, amino acids, ILs, ammonia, and alkaline solutions) and adsorption (solid sorbents), followed by a detailed literature survey of solvent-based capture methods. Recognizing the isolated inefficiencies of standalone capture or utilization processes, the review underscores the emerging importance of ICCU strategies. Recent advancements in CO2\ conversion to methanol, methane, and formic acid via integrated systems are discussed, highlighting the synergy between capture and conversion units.

}, doi = {https://doi.org/10.1016/j.scca.2025.100139}, author = {Sudhakaran, Amitha Kalappurakkal and Sreekantan, Sreejith and Marimuthu, Banu} } @article {49728, title = {Relativistic extended-coupled-cluster calculations of P , T -odd sensitivity parameters for diatomic molecules}, journal = {Journal of Chemical Theory and Computation}, volume = {21}, year = {2025}, month = {MAY}, pages = {5481-5489}, type = {Article}, abstract = {

We demonstrate the first application of the four-component relativistic extended-coupled-cluster (ECC) method, a variational approach, to determine the P , T -odd molecular electronic structure parameters necessary for high-precision spectroscopic measurements on ultracold molecules. We calculate the P , T -odd sensitivity parameters for two moderately heavy, laser-coolable diatomic molecules (SrH and SrF), as well as two relatively lighter open-shell molecules (CaH and CaF) in their ground electronic state, 2 Sigma 1/2. The hyperfine structure constants of 87Sr in the SrF and SrH molecules are also computed and compared with available experimental results to assess the accuracy of our calculations. Furthermore, we examine the roles of electron correlation, relativity, basis set, and virtual spinors in ECC calculations of the sensitivity parameters. Our study reveals that the ECC method is a reliable technique for studying P , T -odd properties of diatomic molecules such as CaH, CaF, SrH and SrF, yielding results in very good agreement with those obtained using two widely employed analytic approaches: the Z-vector technique and the linear expectation-value method within the relativistic single-reference coupled-cluster singles and doubles framework.

}, issn = {1549-9618}, doi = {10.1021/acs.jctc.5c00329}, author = {Talukdar, Kaushik and Nayak, Malaya K. and Vaval, Nayana and Pal, Sourav} } @article {49891, title = {Renewable and degradable polyoxalates derived from castor oil}, journal = {Macromolecular Chemistry and Physics}, volume = {226}, year = {2025}, month = {SEP}, type = {Article}, abstract = {

Renewable feedstocks pave the way to reduce the demand for petroleum-derived chemicals. Castor oil is one such plant-based raw material that can be used to synthesize chemicals and materials with diverse applications. Herein, we report the synthesis of a novel monomer, 18-methoxy-18-oxooctadec-9-en-7-yl methyl oxalate (3), from castor oil-derived ricinoleic acid. The identity of the monomer 3 has been unambiguously ascertained using 1-2D NMR spectroscopic analysis. Monomer 3 was then subjected to condensation polymerization with potentially bio-renewable long-chain aliphatic diols to yield degradable linear polyoxalates having molecular weights in the range of 8000-22,000 g/mol. The polymerization reactions were performed using pTSA and [Sn(Oct)2] as catalysts, and the polymerization conditions were optimized. The structure of the polymer was confirmed by 1-2D NMR spectroscopy, IR spectroscopy, and GPC analysis. The thermal characterizations of the polyoxalates were carried out by DSC and TGA analysis. The polyoxalates were found to degrade in acidic media. These renewable polyoxalates were further reacted with thiols by {\textquoteleft}{\textquoteleft}thiol-ene{\textquoteright}{\textquoteright} click reaction to produce a cross-linked rubbery polymer, which retained degradability.

}, keywords = {castor oil derivatives, hydrolytic degradations, polyoxalates}, issn = {1022-1352}, doi = {10.1002/macp.202500113}, author = {Menon, Abhijith Hari and Joseph, Seena and Shaikh, Maulali H. and Chikkali, Samir H.} } @article {49785, title = {Residence time distribution of powders in a vertical single screw reactor: experiments using salt-coated tracer particles and simulations}, journal = {Particuology}, volume = {107}, year = {2025}, month = {DEC}, pages = {313-326}, type = {Article}, abstract = {

The use of single and twin-screw extruders for solid-phase reactions is a promising method to intensify a process in a more sustainable manner. In this manuscript, we report a detailed analysis of the residence time distribution (RTD) in vertical single-screw reactors. The results will help in the selection of the right screw design that would help achieve the desired residence time, which is necessary for a reaction to happen. Experiments were conducted in three vertical screw reactors (having fixed shaft diameter) with varying dimensions using granular free-flowing powders of sodium chloride and silica with a mean particle size of similar to 25 mu m. RTD behavior was modeled using the radial particle velocities in the screw reactor{\textquoteright}s centrifugal field. Further, a method is proposed for estimating the axial dispersion coefficient of dry powders in such sheared flows using true and bulk densities of the powder and the screw shear rate. This dispersion coefficient is used in the axially dispersed plug flow model to describe the RTD behavior of screw reactors with acceptable accuracy. The theoretically predicted and experimentally obtained dispersion coefficients are found to be similar thereby confirming the suitability of the model. (c) 2025 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights are reserved, including those for text and data mining, AI training, and similar technologies.

}, keywords = {Bulk density, Centrifugal field in screw reactor, Particle inertial number, Powder dispersion coefficient, Powder flow, Single-screw extruder}, issn = {1674-2001}, doi = {10.1016/j.partic.2025.10.008}, author = {Rajendra, R. Sriram and Palgadhmal, Anil V. and Kulkarni, Amol A.} } @article {49594, title = {Resolving salt-cocrystal conundrum in multicomponent crystals by using X-ray quantum crystallography}, journal = {Journal of Physical Chemistry C}, volume = {129}, year = {2025}, month = {MAY}, pages = {9169-9178}, type = {Article}, abstract = {

The structural identity of multicomponent crystals as a salt or cocrystal is dictated by the proton transfer state between the molecular components. In pharmaceutical drugs, solid-state forms such as salts or cocrystals can have significantly distinct stability, dissolution, and solubility profiles. The accurate location of proton positions is a formidable task using conventional X-ray crystallography, as the atomic scattering factors are based on spherical electron density models. Herein, we demonstrate that the X-ray quantum crystallographic (QCr) technique of Hirshfeld Atom Refinement (HAR), based on aspherical atomic scattering factors, can be effectively employed to resolve this riddle. Our HAR models accurately located the proton positions, thus distinguishing salts, cocrystals, and continuum crystal structures, which are substantiated by the N 1s binding energies from X-ray photoelectron spectroscopy (XPS) corresponding to the base components in a series of crystals. The QCr models reveal the subtle features of electron localization and bonding around the double-well potential in the intermolecular proton-transfer regions in these crystals.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.5c00975}, author = {Sudheendranath, Athul and Tothadi, Srinu and Pradhan, Amit Kumar and Prajapati, Aditya Kumar and Nangia, Ashwini and Thomas, Sajesh P.} } @article {49675, title = {Retrieval augmented generation for building datasets from scientific literature}, journal = {Journal of Physics-Materials}, volume = {8}, year = {2025}, month = {JUL}, pages = {035006}, type = {Article}, abstract = {

In this work, we show that employing retrieval augmented generation (RAG) with a large language model (LLM) enables us to extract accurate data from scientific literature and construct datasets. The rapid growth in publications necessitates the automation of extraction of structured data as it is crucial for training machine learning(ML) models. The pipeline developed is simple and can be adjusted accordingly with natural language as input. Quantization enables us to run LLMs on consumer hardware and remove the reliance on closed-source models. Both Llama3-8B and Gemma2-9B with RAG give structured output consistently and with high accuracy as compared to direct prompting. Using the newly developed protocol, we created a data set of metal hydrides for solid-state hydrogen storage from paper abstracts. The accuracy of the generated dataset was \>88\% in the cases tested. Further, we demonstrate that the generated dataset is ready-to-use for ML models by testing it with HYST to predict the H(2)wt\textbackslash\% at a given temperature. Thus, we demonstrate a pipeline to create datasets from scientific literature at minimal computational cost and high accuracy.

}, keywords = {dataset building, Hydrogen storage, LLM, materials, RAG}, doi = {10.1088/2515-7639/ade1fa}, author = {Maharana, Piyush Ranjan and Verma, Ashwini and Joshi, Kavita} } @article {49919, title = {Revealing the functional importance of tyrosine and tryptophan of human hemoglobin for development of structural templates representing protein microenvironment}, journal = {Computational and Theoretical Chemistry}, volume = {1254}, year = {2025}, month = {DEC}, pages = {115483}, type = {Article}, abstract = {

Microenvironment surrounding Tyrosine (Tyr) / Tryptophan (Trp) and heme appear to characterize the UV-vis absorption spectra of human hemoglobin (HHb). Structural elucidation of HHb using multiple tools, that may contribute to its spectral properties, then indicate greater structural stability of subunit A and the significance of its heme, Tyr42 and Trp14. Mutagenesis of Tyr42 and Trp14 of subunit A to Glycine (Gly) further validate their contribution in determining the structural stability, physicochemical properties, functional properties, and secondary structure of HHb. Accordingly, the use of structural coordinates of Tyr42 and heme as the first cluster and Trp14, Tyr42 and heme as the second cluster to represent the microenvironment of HHb is assessed for the first time. The calculated (DFT) absorption and FTIR properties of both the clusters are in well agreement with experimental absorption and FTIR characteristics of whole HHb suggesting prospective biomedical applications of these clusters.

}, keywords = {Heme, Human hemoglobin, Nano-peptide cluster, Representative template, Trp14, Tyr42}, issn = {2210-271X}, doi = {10.1016/j.comptc.2025.115483}, author = {Chakraborty, Madhurima and Sen Banerjee, Nineesha and Ghosh, Deborin and Bhattacharya, Prabuddha and Ganguly, Tapan} } @article {49972, title = {Review on recent progress in synthesis, properties, and applications of MXenes}, journal = {Oxford Open Materials Science}, volume = {5}, year = {2025}, month = {DEC}, type = {Article}, abstract = {

Abstract

MXenes, a noble class of two-dimensional (2D) material, discovered in 2011 have gained attention in recent years. They have attracted significant attention due to their flexible elemental composition, distinctive 2D-layered architecture, large surface area, and abundant surface terminations. Top-down synthesis techniques such as HF etching, alkaline etching, and electrochemical methods are used for MXene synthesis. Alongside these methods, methods like chemical vapor deposition (CVD), template method and plasma enhanced pulsed layer deposition (PELPD) are also used for the thin-film synthesis of MXenes. The discovery of double transition-metal layered MXene, solid, and high entropy MXene open up the prospect of further novel structures. MXenes are electrically conductive and have promising optoelectronic, mechanical, and thermoelectric properties. MXenes have also shown immense potential in biomedicine and environmental applications. The surface chemistry of MXene make them ideal for biosensors, drug delivery, and photothermal therapy, while their photocatalytic and adsorption properties enable efficient removal of pollutants and contaminants from water. This review examines the various MAX phase synthesis methods, such as solid-state reactions, hot isostatic pressing, and spark plasma sintering, followed by top-down techniques like HF etching, alkaline etching, and electrochemical etching, as well as bottom-up methods like CVD, template approaches, and plasma-enhanced pulsed layer deposition. The review also looks into the optical, chemical, and electronic properties of MXene, as well as their advancements in energy storage, optoelectronics, pollution avoidance, biomedical applications, and more.

}, doi = {https://doi.org/10.1093/oxfmat/itae017}, author = {Borah, Ashish Jyoti and Natu, Varun and Biswas, Abhijit and Srivastava, Anchal} } @article {49777, title = {Rh-Catalyzed Asymmetric Hydroformylation: The Case of Substituted and Heterocyclic Olefins}, journal = {ChemCatChem}, volume = {17}, year = {2025}, month = {NOV }, type = {Review}, abstract = {

Asymmetric hydroformylation (AHF) of prochiral alkenes is an efficient way to synthesize optically active aldehydes, which are versatile chiral building blocks for pharmaceuticals, agrochemicals, and other fine chemicals. The purpose of this review is to take stock of developments in the last decade and shed light on the understanding of the field of AHF. So far, most of the literature methods focused on the use of Rh-based catalysts, due to high catalytic activity and excellent chemoselectivity for the aldehydes. Several chiral phosphorus ligands have been successfully developed for Rh-catalyzed AHF reactions. This review examines the role of the substrate/olefins in AHF. Several different types of {\textquoteleft}{\textquoteleft}mono-substituted{\textquoteright}{\textquoteright} terminal olefins (functionalized/nonfunctionalized) with a variety of chiral ligands have been investigated, which show high activity and excellent ee of up to 99\%. The AHF of {\textquoteleft}{\textquoteleft}di-substituted{\textquoteright}{\textquoteright} and {\textquoteleft}{\textquoteleft}tri-substituted{\textquoteright}{\textquoteright} olefins is rarely reported. This review summarizes the evolution of chiral ligands for AHF. It discusses the progress made in desymmetrizing hydroformylation. In addition, it highlights important developments in AHF carried out with and without syngas. These advances span a wide variety of alkenes. Additionally, the review offers future approaches in the field of AHF for the synthesis of optically active aldehydes.

}, keywords = {Asymmetric hydroformylation, Asymmetric transfer hydroformylation, Chiral ligands, Desymmetrizing hydroformylation, Substituted alkenes}, issn = {1867-3880}, doi = {10.1002/cctc.202500979}, author = {Tewari, Tanuja and Khopade, Kishor V. and Chikkali, Samir H.} } @article {49889, title = {Rongalite-promoted self-dimerization of 3-acylidene-2-oxindoles: a diastereoselective route to synthesis of bispirooxindoles}, journal = {Organic \& Biomolecular Chemistry}, volume = {23}, year = {2025}, month = {OCT}, pages = {8687-8694}, type = {Article}, abstract = {

A facile and efficient one-pot rongalite-mediated self-dimerization of 3-acylidene-2-oxindoles has been developed for the diastereoselective synthesis of highly functionalized dispirocyclopentanebisoxindoles. The reaction proceeds via a domino sequence involving intermolecular Michael addition followed by intramolecular aldol cyclization under basic conditions. Rongalite, an inexpensive and readily available reagent (similar to\$0.03 per g), plays a crucial role in promoting the transformation, offering significant advantages such as operational simplicity, step economy, scalability to gram-scale synthesis, and potential for post-functionalization. This methodology provides an efficient route to structurally complex oxindole frameworks with high stereocontrol, demonstrating broad synthetic utility.

}, issn = {1477-0520}, doi = {10.1039/d5ob01069a}, author = {Chaudhari, Suryakant S. and Nichinde, Chandrakant B. and Patil, Baliram R. and Girase, Amardipsing S. and Kaulage, Sandeep H. and Kinage, Anil K.} } @article {49522, title = {Ruthenium-catalyzed deconstruction of polyolefins: a strategy to up-cycle waste polyethylene to value-added alkene}, journal = {Angewandte Chemie-International Edition}, volume = {64}, year = {2025}, month = {APR}, type = {Article}, abstract = {

Synthesis of value-added products from post-consumer waste polyolefins is fascinating as well as challenging. Here we report ruthenium-catalyzed up-cycling of the polyethylene to long-chain alkene derivatives. The developed methodology mainly involves two steps i.e., dehydrogenation of polyethylene through hydrogen atom transfer and its metathesis using the HG-II catalyst. The dehydrogenation of polyethylene using ruthenium catalysis derived up to 3.38 \%, of double bonds; with 90 \% of the recovered polyolefin material. The obtained unsaturated polyethylene was subjected to cross-metathesis with ethylene using HG-II catalytic system. This resulted in the synthesis of predominantly dodecene (C12) derivatives, with 58 \% selectivity, along with other derivatives of varying chain lengths. The overall reaction produced terminal and internal olefins in the ratio 1:0.8 respectively. The dehydrogenation of polyethylene and its deconstruction was confirmed by NMR spectroscopy, Gel Permeation Chromatography (GPC) and Differential Scanning Calorimetry (DSC). The origin of C12 selectivity has been demonstrated by control experiments. The scope of the methodology was extended to post-consumer waste polyethylene which gave high conversion to value-added dodecene derivatives as a major product.

}, keywords = {Deconstruction, Homogeneous catalysis, ruthenium, Upcycling, Waste plastic}, doi = {10.1002/anie.202422609}, author = {Padhi, Ganeshdev and Khopade, Kishor V. and Moyilla, Nageswararao and Rangappa, Raghavendrakumar and Chikkali, Samir H. and Barsu, Nagaraju} } @article {50022, title = {Radical-promoted cyclization of 3-allyl-2-arylquinazolinones mediated by silver(i) salts to access SCF3/SCN-enriched dihydroisoquinolino[1,2-b]quinazolinones}, journal = {Organic \& Biomolecular Chemistry}, volume = {24}, year = {2026}, month = {FEB}, pages = {1263-1267}, type = {Article}, abstract = {

Herein, we describe an efficient approach for the synthesis of SCF3- and SCN-functionalized polycyclic dihydroisoquinolino[1,2-b]quinazolinones through radical-mediated thio-functionalization of allylic alkenes followed by intramolecular cyclization. The transformation proceeds through sulfur-radical-triggered C-S and C-C bond formation, providing an efficient route to sulfur- and fluorine-enriched polycyclic quinazolinones. Moreover, this strategy offers high atom economy, operational simplicity, and broad substrate compatibility.

}, issn = {1477-0520}, doi = {10.1039/d5ob01755f}, author = {Vara, Vijay and Thete, Kishor R. and Khan, Akram A. and Muthukrishnan, M.} } @article {50031, title = {Reaction kinetics for dehydrogenation of decahydroquinoline to quinoline for hydrogen generation}, journal = {Chemical Engineering \& Technology}, volume = {49}, year = {2026}, month = {FEB}, pages = {e70177}, type = {Article}, abstract = {

Catalytic dehydrogenation of decahydroquinoline (DHQ) to quinoline is a promising pathway for hydrogen release in liquid organic hydrogen carrier systems. In this work, solvent-free DHQ dehydrogenation over Pd/Al2O3 is systematically investigated to evaluate hydrogen release performance and reaction kinetics. High DHQ conversion (83.9\%) and degree of dehydrogenation (82.7\%) are achieved at optimal reaction conditions. A power-law kinetic model based on a simplified reaction mechanism is developed and simulated using a Markov Chain Monte Carlo (MCMC) approach for estimation of rate constants and validation of concentration profiles with experimental data. The apparent activation energies are determined to be 45.85 kJ/mol for DHQ to 5,6,7,8-tetrahydroquinoline (bz-THQ) and 185.43 kJ/mol for bz-THQ to quinoline formation, identifying latter as the rate-limiting step. This framework provides mechanistic insight and supports the potential of DHQ as an efficient hydrogen carrier.

}, keywords = {Decahydroquinoline (DHQ), degree of dehydrogenation, Dehydrogenation, rate-limiting step, Reaction kinetics, Weisz-Prater criterion}, issn = {0930-7516}, doi = {10.1002/ceat.70177}, author = {Bagwan, Farahanaz M. and Dadkar, Sarthak S. and Kinage, Anil K. and Vasireddy, Satyam Naidu} } @article {49816, title = {Recyclable l-glutamic acid-based polyester schiff base cross-linker for 3D printing applications}, journal = {ACS Applied Polymer Materials}, volume = {8}, year = {2026}, month = {JAN }, pages = {641-650}, type = {Article}, abstract = {

An l-amino acid-based polyester Schiff base cross-linker was developed from amine-functionalized polyester and biobased methacrylate vanillin. Vanillin, one of the few biobased and aromatic compounds readily available on an industrial scale, has recently garnered significant attention from the polymer community. The l-amino acid-based polyester Schiff base cross-linker (P3) was synthesized by condensing the aldehyde group of methacrylate vanillin with the amine group of the l-glutamic acid polyester. This polymeric cross-linker was used in resin formulations consisting of isobornyl acrylate as a reactive diluent and diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide as the photoinitiator for digital light processing (DLP) three-dimensional (3D) printing. The resulting 3D-printed parts exhibited good mechanical properties, with a Young{\textquoteright}s modulus of 1.5 GPa, and high thermal stability, with a T max of 410 degrees C. The chemical degradability of the 3D-printed materials was demonstrated in a mixture of tetrahydrofuran and diethylene triamine (1:1) at 80 degrees C for 48 h. The reusability of the recovered resin was demonstrated by adding fresh methacrylate vanillin and photoinitiator, followed by 3D printing using a DLP 3D printer. The 3D-printed parts produced from the recycled resin retained substantial mechanical properties, with a Young{\textquoteright}s modulus of 1.39 GPa, and thermal stability, with a T max of 390 degrees C.

}, keywords = {3D printing, chemical degradation, covalent adaptable network, l-glutamicacid, Vanillin}, issn = {2637-6105}, doi = {10.1021/acsapm.5c04144}, author = {Kamble, Ganesh N. and Ghute, Aaditi P. and Asha, S. K.} } @article {49794, title = {Redox- and pH-responsive block copolymer nanocarriers with dual drug conjugation through dynamic covalent and hydrogen bonds}, journal = {Journal of Applied Polymer Science}, volume = {143}, year = {2026}, month = {MAR}, pages = {e70205}, type = {Article}, abstract = {

Loading of multiple drugs in a nanocarrier with high entrapment efficiency is important for combination therapy in cancer treatment. Here, a block copolymer comprising hydrophobic poly(epsilon-caprolactone) block with a defined number of pendent propargyl groups, polyethylene glycol monomethyl ether as a hydrophilic block, and a redox-responsive disulfide group at the block junction is synthesized using click chemistry and ring-opening polymerization (ROP). Benzaldehyde and thymine groups are introduced in the side chains for selective attachment of anti-cancer drugs, doxorubicin (DOX) and methotrexate (MTX), via the formation of pH-responsive imine linkage and hydrogen bonds, respectively. The drug-conjugated block copolymers are assembled into spherical micelles of \< 200 nm, and the preferential release of DOX and MTX in response to acidic pH and redox conditions is shown. At pH 5, DOX release was 59.5\%, and MTX release was 40\% compared to 13\% and 12\% at pH 7.4, whereas at pH 5 with 10 mM GSH, a DOX release of 81.5\% was observed after 48 h. Cellular uptake of drug-conjugated micelles and their apoptosis compared to free DOX in the MDA-MB-231 breast cancer cells is demonstrated. Caveolae-mediated endocytosis was found to be the major pathway used by drug-loaded nanocarriers.

}, keywords = {biodegradable, copolymers, DOX-conjugate, drug delivery systems, methotrexate, micelles, pH-responsive, redox-responsive}, issn = {0021-8995}, doi = {10.1002/app.70205}, author = {Avhad, Shankarrao V. and Surapaneni, Sai Geetika and Purohit, Poorvi M. and Ambade, Ashootosh V.} } @article {49941, title = {Repurposed ciprofloxacin derivatives as potent autophagic-type anticancer agents}, journal = {Bioorganic \& Medicinal Chemistry Letters}, volume = {130}, year = {2026}, month = {JAN }, pages = {130432}, type = {Article}, abstract = {

Drug repurposing - also known as drug repositioning is a proven strategy for identifying new therapeutic uses for existing and pre-approved drugs with considerable success in recent years. Herein, we report the discovery of a novel class of ciprofloxacin-amino acid conjugates that are dynamically potent against different cancer cell lines. Some of the molecules reported herein displayed a strong anti-proliferative effect on MCF-7 (IC50: 6 mu M). The most active anti-proliferative molecule of this series 7a suppressed the proliferation of HCT116, A549, and MDAMB-231 cancer cell lines. Furthermore, we established that the treatment with 7a leads to DNA damage-mediated autophagic cell death in cancer cells. Our findings suggest that appropriate derivatization of the ciprofloxacin drug can yield promising anti-cancer compounds in easy synthetic operations.

}, keywords = {Anticancer drugs, Autophagic cell death, ciprofloxacin}, issn = {0960-894X}, doi = {10.1016/j.bmcl.2025.130432}, author = {Gone, Nilu Vijay and Sharma, Tanisha and Joshi, Rakesh and Upreti, Akshita and Santra, Manas and Sanjayan, Gangadhar J.} } @article {49943, title = {Reversible twisting-induced crystalline-polycrystalline transformation in cyanoacrylate crystals}, journal = {Chemical Communications}, volume = {62}, year = {2026}, month = {JAN }, pages = {264-267}, type = {Article}, abstract = {

We report cyanoacrylate-based organic crystalline materials that exhibit reversible hand-induced helical twisting through the combined action of 1D elasticity and 2D plasticity. These crystals twist and untwist without lattice damage, retaining their elastic integrity through pi slip-stacking and Cl \& ctdot;Cl, C-H \& ctdot;Cl, and Me \& ctdot;Me interactions. Their unique integration of elastic recovery, plastic bending, and reversible twisting highlights their potential as mechanically adaptive materials for flexible and responsive devices.

}, issn = {1359-7345}, doi = {10.1039/d5cc05852j}, author = {Parthasarathy, Thiyagaraj and Bhowmik, Aritra and Bhattacharya, Biswajit and Mishra, Manish Kumar and Ghosh, Soumyajit} } @article {50051, title = {Rootless survivors in plants}, journal = {Plant Science}, volume = {364}, year = {2026}, month = {MAR}, pages = {112951}, type = {Review}, abstract = {

The root system provides anchorage, uptakes of nutrients and water, and forms different associations within soil environments that govern plant fitness, crop performance, and yield. Auxin controls almost all aspects of root development. Both shoot- and root-derived auxins contribute to formation of polar auxin transport, which is crucial for establishing and maintaining normal root architecture. The coordinated activities of auxin influx and efflux carriers establish necessary polar auxin transport. A variety of natural metabolites and synthetic compounds are shown to interfere with auxin metabolism, transporters and signaling pathways having a negative impact on root growth. In this review, we highlight the reports demonstrating the observance of rootless phenotypes in plants and associated molecular mechanisms. Rootless phenotypes can be produced under in vitro culture conditions by modulation of phytohormone combinations (especially auxin and cytokinin), and supplementation of naturally-occurring flavonoids and their glycosides or synthetic auxin transport inhibitors (1-Nnaphthylphthalamic acid and 2,3,5-triiodobenzoic acid) or under in vivo conditions by modulation of several genes directly or indirectly associated with auxin biology. Further, we describe the crosstalk of naturallyoccurring flavonoids (e.g. kaempferol, quercetin), their glycosides, and other metabolites (e.g. azelaic acid, cis-cinnamic acid) with auxin transporters, their mobile nature, and influence on root development. Moreover, we provide evolutionary perspective on the auxin and flavonoid pathways and their possible roles in naturally rootless plants. We also emphasize the importance of rootless or reduced root growth phenotypes in modern agriculture, and the pressing needs to utilize naturally occurring auxin transport inhibitors for industrial and research applications.

}, keywords = {Auxin, Flavonoid, Flavonoid-glycoside, Polar auxin transport, rootless}, issn = {0168-9452}, doi = {10.1016/j.plantsci.2025.112951}, author = {Kondhare, Kirtikumar R. and Lavhale, Santosh G. and Giri, Ashok P.} }