@article {45533,
	title = {Process development of silica extraction from RHA: a cradle to gate environmental impact approach},
	journal = {Environmental Science and Pollution Research},
	volume = {26},
	year = {2019},
	month = {JAN},
	pages = {492-500},
	type = {Article},
	abstract = {<p>India is one of the major rice-producing countries. Rice husk is a major agricultural by-product from rice production, which is used as a fuel in boilers. Its use as fuel produces huge amounts of silica-rich rice husk ash (RHA). This paper aims at providing an overall assessment of environmental impacts associated with the extraction of silica from RHAa process developed by our study group. The functional unit used in this study is production of 100kg of silica. The analysis included the extraction and transportation of other raw materials; RHA was assumed to be processed at the site. The study was conducted in accordance with the international ISO 14040 procedural framework. LCA is performed using GaBi Education software, and five midpoint indicators are chosen to assess the environmental impacts of silica extraction. The overall climate change (CC) of the extraction process is 7.26kg CO2 equivalent per kg of silica produced. A high contribution of calcination to CC is attributed to the use of electricity. The comprehensive environmental impacts of silica-rich RHA resulting from processing of RHA and improvement options to achieve sustainable production are presented. The negative impacts that can be avoided during silica extraction are also discussed. It is observed that calcination is a major contributor to the overall environmental indicators. The work also stresses on the use of renewable energy for electricity generation, which would help in decreasing the overall greenhouse gas emissions during extraction while ensuring waste utilization.</p>},
	keywords = {Environmental impacts, Life cycle assessment, Rice husk ash, silica},
	issn = {0944-1344},
	doi = {10.1007/s11356-018-3648-9},
	author = {Joglekar, Saurabh N. and Kharkar, Rhushikesh A. and Mandavgane, Sachin A. and Kulkarni, Bhaskar D.}
}
@article {49138,
	title = {Synthesis of advanced asbestos-free material using rice husk ash and marble waste for thermal insulation applications},
	journal = {Biomass Conversion and Biorefinery},
	volume = {13},
	year = {2023},
	month = {JUL},
	pages = {8985-8998},
	type = {Article},
	abstract = {<p>
	The importance and utilization of advanced thermal insulating materials increase due to their broad and irreplaceable energy conservation role. This paper describes the novel way of achieving insulating material. In two waste by-products, namely rice husk ash (RHA), agriculture waste, and marble waste powder (MWP), industrial waste has been utilized to make asbestos-free advanced material for thermal insulation. A novel method for making asbestos-free advanced material for thermal insulation using RHA and marble waste{\textquoteright}s inherent characteristics has developed mechano-chemical for appropriate physico-chemical consolidation, densification, and ceramic processing route. The Si and Ca sources undergo a series of chemical transformations accompanied by mass transfer and thermal reactions during the synthesis process. The formation of this silicate compound occurs due to the presence of higher contents of CaO in marble waste powder (MWP) and silica in rice husk ash (RHA), resulting in thermal insulating characteristics in the advanced thermal insulation material (ATIM). Raman spectra of ATIM after heating at 1100 degrees C were mainly amorphous, which had a broad peak at 1072 cm(-1). This shows thermal transformation occurs after the heating process, the admixture of tailored powder, and fly ash (FA). The density of the ATIM is found to be 1150 kg/m(3). The phase transformation (glass transition temperature) was found in all the samples between 600 and 800 degrees C. The mechanical properties, namely the compressive strength and impact strength evaluation test, showed that the material meets the standard specifications for ceramic tiles. The thermal conductivity (W/mK) was calculated from different temperature 30, 50, 100,150, and 200 degrees C and found to be 0.571, 0.541, 0.516, 0.498, and 0.477, respectively. According to the test results, it is concluded that ATIM from MWP, RHA, and FA were excellent insulating components. The novel feature of the reported process is the development of non-toxic and asbestos-free thermal insulating low-cost material wherein chemically designed and mineralogically formulating desired phases lead to the homogeneous and effective thermal insulating matrix. The process is feasible, simple, cheap, and highly energy-efficient, increases production efficiency, and is environmentally friendly. The widespread use of advanced material for a broad application spectrum ranges from aerospace, automobile, electronics, transportation, construction, to other industries.</p>
},
	keywords = {Asbestos, Fly ash, Marble waste, Material, Rice husk ash, Thermal insulation},
	issn = {2190-6815},
	doi = {10.1007/s13399-021-01950-8},
	author = {Verma, Sarika and Bajpai, Harsh and Suresh, S. and Mili, Medha and Gupta, Ritesh Kumar and Shetty, Rohit and Kamble, Sanjay and Khan, Mohd. Akram and Hashmi, S. A. R. and Srivastava, A. K.}
}
