@article { ISI:000357868100006, title = {Electrochemically exfoliated black phosphorus nanosheets - prospective field emitters}, journal = {European Journal of Inorganic Chemistry}, number = {19}, year = {2015}, month = {JUL}, pages = {3102-3107}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, abstract = {

Herein we report field emission (FE) investigations on an electrochemically exfoliated few-layered black phosphorus nanosheet emitter at a base pressure of approximately 1x10(-8) mbar. The turn-on electric field required to draw an emission current density of approximately 10 A/cm(2) is found to be about 4.2 V/m. Furthermore, few-layered black phosphorus nanosheet emitters deliver an emission current density of about 170 A/cm(2) at an applied field of about 7.5 V/m. The emission current vs. time plot measured at preset current values of about 5 A shows emission current fluctuations within +/- 10\% of the average value, indicating the highly stable nature of the black phosphorus field emitter. Thus, the 2D black phosphorus nanosheets synthesized using the simple electrochemical exfoliation method can be utilized for micro/nanoelectronics and flat panel FE display applications.

}, keywords = {field emission, Layered compounds, Nanostructures, Phosphorus}, issn = {1434-1948}, doi = {10.1002/ejic.201500145}, author = {Erande, Manisha B. and Suryawanshi, Sachin R. and More, Mahendra A. and Late, Dattatray J.} } @article {46893, title = {Piezoelectric energy harvesting from a ferroelectric hybrid salt [Ph3MeP](4)[Ni(NCS)(6)] embedded in a polymer matrix}, journal = {Angewandte Chemie-International Edition}, volume = {59}, year = {2020}, month = {JUN }, pages = {10368-10373}, type = {Article}, abstract = {

Organic-inorganic hybrid ferroelectrics are an exciting class of molecular materials with promising applications in the area of energy and electronics. The synthesis, ferroelectric and piezoelectric energy harvesting behavior of a 3d metal ion-containing A(4)BX(6) type organic-inorganic hybrid salt [Ph3MeP](4)[Ni(NCS)(6)] (1) is now presented. P-E hysteresis loop studies on 1 show a remnant ferroelectric polarization value of 18.71 mu C cm(-2), at room temperature. Composite thermoplastic polyurethane (TPU) devices with 5, 10, 15 and 20 wt \% compositions of 1 were prepared and employed for piezoelectric energy harvesting studies. A maximum output voltage of 19.29 V and a calculated power density value of 2.51 mW cm(-3) were observed for the 15 wt \% 1-TPU device. The capacitor charging experiments on the 15 wt \% 1-TPU composite device shows an excellent energy storage performance with the highest stored energies and measured charges of 198.8 mu J and 600 mu C, respectively.

}, keywords = {energy conversion, mechanical properties, non-covalent interactions, organic-inorganic hybrid composites, Phosphorus}, issn = {1433-7851}, doi = {10.1002/anie.202001250, Early Access Date = APR 2020}, author = {Vijayakanth, Thangavel and Ram, Farsa and Praveenkumar, Balu and Shanmuganathan, Kadhiravan and Boomishankar, Ramamoorthy} } @article {47778, title = {Performance of Aspergillus niger (NCIM 563) phytase based feed supplement for broiler growth and phosphorus excretion}, journal = {Biocatalysis and Agricultural Biotechnology}, volume = {31}, year = {2021}, month = {JAN}, pages = {101887}, type = {Article}, abstract = {Despite availability of commercial enzymes, the phytase produced from relatively inexpensive systems with high yields are gaining global attention in the feed industries in post-antibiotic era. We studied A. niger NCIM 563 Phytase produced in solid state fermentation (SSF) derived Koji powder and evaluated its utility in the poultry feed for broiler growth performance and phosphorous (P) excretion. The ability of phytase in the dried powder was estimated to dephytinize the poultry feed under simulated gastric conditions. Poultry feed was formulated using A. niger NCIM 563 phytase followed by a 42 days feed trial on broilers. After supplementation of phytase to the diet, there was a reduction of dietary P, maintained growth performance, skeletal development of broilers and reduced levels of phytic acid and available P in the litter. Extracellular phytase was able to replace up to 0.1\% P in poultry feed. Minimal downstream processing a low-cost feed supplement with significant phytase activity could provide added advantage for anti-nutrition free poultry feed.}, keywords = {Phosphorus, Phytase, Poultry feed, Solid state fermentation}, isbn = {1878-8181}, doi = {10.1016/j.bcab.2020.101887}, url = {https://www.sciencedirect.com/science/article/pii/S1878818120319186}, author = {Puppala, Kumar Raja and Buddhiwant, Priyanka G. and Agawane, Sachin B. and Kadam, Avinash S. and Mote, Chandrashekhar S. and Lonkar, Vijaysinh D. and Khire, Jayant M. and Dharne, Mahesh S.} } @article {49140, title = { Ferroelectric aminophosphonium cyanoferrate with a large electrostrictive coefficient as a piezoelectric nanogenerator}, journal = {Angewandte Chemie-International Edition}, volume = {62}, year = {2023}, month = {JAN }, type = {Article}, abstract = {

Hybrid materials possessing piezo- and ferroelectric properties emerge as excellent alternatives to conventional piezoceramics due to their merits of facile synthesis, lightweight nature, ease of fabrication and mechanical flexibility. Inspired by the structural stability of aminophosphonium compounds, here we report the first A(3)BX(6) type cyanometallate [Ph-2((PrNH)-Pr-i)(2)P](3)[Fe(CN)(6)] (1), which shows a ferroelectric saturation polarization (P-s) of 3.71 mu C cm(-2). Compound 1 exhibits a high electrostrictive coefficient (Q(33)) of 0.73 m(4) C-2, far exceeding those of piezoceramics (0.034-0.096 m(4) C-2). Piezoresponse force microscopy (PFM) analysis demonstrates the polarization switching and domain structure of 1 further confirming its ferroelectric nature. Furthermore, thermoplastic polyurethane (TPU) polymer composite films of 1 were prepared and employed as piezoelectric nanogenerators. Notably, the 15 wt \% 1-TPU device gave a maximum output voltage of 13.57 V and a power density of 6.03 mu W cm(-2).

}, keywords = {Cyanometallates, energy conversion, H-bonding, hybrid composites, Phosphorus}, issn = {1433-7851}, doi = {10.1002/anie.202214984}, author = {Vijayakanth, Thangavel and Sahoo, Supriya and Kothavade, Premkumar and Sharma, Vijay Bhan and Kabra, Dinesh and Zareba, Jan K. K. and Shanmuganathan, Kadhiravan and Boomishankar, Ramamoorthy} }