@article { ISI:000242931900034,
	title = {Field emission from oriented tin oxide rods},
	journal = {Thin Solid Films},
	volume = {515},
	number = {4},
	year = {2006},
	month = {DEC},
	pages = {1450-1454},
	publisher = {ELSEVIER SCIENCE SA},
	type = {Article},
	address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND},
	abstract = {<p>Tin oxide (SnO2) films were grown on silicon substrates by a wet chemical route. It was found from scanning electron microscopy investigations that oriented SnO2 rods normal to the substrates were obtained. Field emission studies were carried out in diode configuration in an all metal ultra high vacuum chamber at a base pressure similar to 1.33 x 10(-8) mbar. The {\textquoteleft}onset{\textquoteright} field required to draw 0.1 mu A/cm(2) current density from the emitter cathode was found to be similar to 3.4 V/mu m for SnO2 rods. The field emission current and applied field follows the Folwer-Nordheim relationship in low field regime. The observed results indicate that the field emission characteristics of chemically grown SnO2 structures are comparable to the vapor grown nanostructures. (c) 2006 Elsevier B.V. All rights reserved.</p>},
	keywords = {field emission, microstructures, scanning electron microscopy, tin oxide},
	issn = {0040-6090},
	doi = {10.1016/j.tsf.2006.04.034},
	author = {Deshpande, A. C. and Koinkar, Pankaj M. and Ashtaputre, S. S. and More, Mahendra A. and Gosavi, S. W. and Godbole, P. D. and Joag, Dilip S. and Kulkarni, S. K.}
}
@article {46074,
	title = {Magnetic parameters of SrFe12O19 sintered from a mixture of nanocrystalline and micron-sized powders},
	journal = {Ceramics International},
	volume = {45},
	year = {2019},
	month = {JUL},
	pages = {13592-13596},
	type = {Article},
	abstract = {<p>Obtaining higher magnetic parameters is essential for high-power sintered strontium ferrite (SrFe12O19) for various applications. A novel approach has been made to improve the magnetic parameters of sintered strontium ferrite by making self-composites from nano and micron-sized powders. Powders with two different weight ratios (50 wt\% nano:50 wt\% micron and 75 wt\% nano:25 wt\% micron) were mixed together, compacted and sintered at 1200 degrees C for 1 h. For a self-composite of 75 wt\% nano and 25 wt\% micron-sized powders, coercivity (H-c) of 3076 Oe has been obtained, larger than the values for the sintered compacts from the component powders. The present study suggests that the magnetic parameters of sintered SrFe12O19 can be improved by making self-composite comprising of nanocrystalline and micron-sized powders.</p>
},
	keywords = {Ceramics, Magnetic materials, microstructures, Self-composites, strontium ferrite},
	issn = {0272-8842},
	doi = {10.1016/j.ceramint.2019.04.023},
	author = {Shashanka, H. M. and Anantharamaiah, P. N. and Joy, P. A.}
}
