@article { ISI:000254869800024,
	title = {Polymer electrolyte fuel cells using nafion-based composite membranes with functionalized carbon nanotubes},
	journal = {Angewandte Chemie-International Edition},
	volume = {47},
	number = {14},
	year = {2008},
	month = {FEB},
	pages = {2653-2656},
	publisher = {WILEY-V C H VERLAG GMBH},
	address = {PO BOX 10 11 61, D-69451 WEINHEIM, GERMANY},
	keywords = {fuel cells, membranes, nanotubes, Polymers, proton transport},
	issn = {1433-7851},
	doi = {10.1002/anie.200704343},
	author = {Kannan, Ramaiyan and Kakade, Bhalchandra A. and Pillai, Vijayamohanan K.}
}
@article {45650,
	title = {1D alignment of PEDOT in a buckypaper for high-performance solid supercapacitors},
	journal = {Chemelectrochem},
	volume = {3},
	year = {2016},
	month = {SEP},
	pages = {1329-1336},
	type = {Article},
	abstract = {<p>A flexible solid-state supercapacitor is prepared from carbon nanotube (CNT)-based buckypaper after forming a thin layer of polyethylenedioxythiophene (PEDOT) on the surface of the CNTs in the paper. A highly conducting PEDOT phase is obtained by interfacial polymerization, in which polymerization is confined at the interface of two immiscible liquids. The hydrophilic interaction between the functionalized CNTs and the oxidizing agent (iron perchlorate, Fe(ClO4)(3)), which is located in the aqueous phase, and the restricted interaction of the oxidizing agent with the EDOT monomer in the organic layer at the immiscible interface play a vital role in establishing a uniform and aggregate-free growth pattern of PEDOT on CNT. By carefully optimizing the amount of polymer in the paper, an electrode with a sheet resistance of 3.4(-1) and equivalent series resistance of 0.95 can be prepared. A thin and flexible solid-state supercapacitor device with an overall thickness of 210m is made by using this paper as the electrodes and poly(vinyl alcohol)/lithium chloride as the gel electrolyte. The power density and energy density of the electrode are 9.94Wcm(-3) and 8.85mWhcm(-3), respectively. The device also delivers a high volumetric capacitance of 18Fcm(-3) and areal capacitance of 354mFcm(-2). The demonstrated strategy is scalable and hence the process can be conveniently applied to prepare large-area PEDOT-modified buckypapers in a short time.</p>},
	keywords = {Carbon, Energy storage, nanotubes, polymerization, Supercapacitors},
	issn = {2196-0216},
	doi = {10.1002/celc.201600229},
	author = {Soni, Roby and Anothumakkool, Bihag and Kurungot, Sreekumar}
}
@article {43771,
	title = {Band alignment and charge transfer pathway in three phase anatase-rutile-brookite TiO2 nanotubes: an efficient photocatalyst for water splitting},
	journal = {Applied Catalysis B-Environmental},
	volume = {128},
	year = {2017},
	month = {DEC},
	pages = {9-19},
	type = {Journal Article},
	abstract = {The study reports electrochemical synthesis, phase evolution and hydrogen generation efficiency of anatase, anatase-rutile and anatase-rutile-brookite (ARB) TiO2 nanotubes for the first time. The SEM and TEM micrographs confirm the tubular morphology of the samples. The presence of anatase, rutile and brookite phases in a single nanotube is confirmed from high resolution TEM analysis. The water splitting efficiency of the three systems are studied under one sun illumination. It is observed that the anatase-rutile-brookite TiO2 nanotubes are highly efficient compared to anatase-rutile or anatase TiO2 nanotubes. The hydrogen generated by ARB composites, after four hours of one sun illumination, is found to be nearly twice that of anatase TiO2 nanotubes and 1.6 times that of anatase-rutile TiO2 nanotubes. The results suggest that the ARB in single nanotube having two junction interfaces, highly facilitate interparticle charge transfer compared to single junction anatase-rutile or bare anatase TiO2 nanotubes. From the deconvolution of PL spectra and the synchrotron radiation assisted valence band edge analysis, the band diagram for the anatase-rutile-brookite phase is constructed. The charge separation and its transfer pathway for efficient photo-assisted water splitting are delineated. This opens a new route for the simple synthesis and study of tri-phase TiO2 for efficient photocatalytic water splitting compared to the widely studied two phase TiO2. (C) 2017 Published by Elsevier B.V.},
	keywords = {Anatase-Rutile-Brookite, Hydrogen generation, nanotubes, Photocatalysis, photoluminescence, Valence band edge},
	doi = {10.1016/j.apcatb.2017.06.033},
	author = {Preethi, L. K. and Mathews, Tom and Nand, Mangla and Jha, S. N. and Chinnakonda, Gopinath S. and Dash, Sitaram}
}
@article {47598,
	title = {Co-decorated tellurium nanotubes for energy storage applications},
	journal = {ACS Applied Nano Materials},
	volume = {4},
	year = {2021},
	month = {SEP},
	pages = {9008-9021},
	type = {Article},
	abstract = {This paper explicitly discusses the synthesis of Co-decorated Te nanotubes (NTs) using Te NTs as the sacrificial template and the evaluation of their electrochemical performance. First, one-dimensional (1D) Te NTs were synthesized and characterized by spectroscopic and microscopic tools such as UV-visible spectroscopy, X-ray diffraction spectroscopy, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray spectroscopy analyses. The as-prepared hexagonal Te NTs (h-Te NTs) possess diameters of about 35 +/- 5 nm and lengths of about 500 +/- 50 nm and were used for the synthesis of Co-decorated Te NTs. The 1D nanostructure with excellent conductivity enables the material to show excellent electrochemical performance. The asymmetric assembly of the CoTe-2//AC electrode material displayed a high specific capacitance of 147 F g(-1) (specific capacity, 162 C g(-1) at a current density of 2 A g(-1) in 4 M KOH electrolyte. In addition to that, the assembly of CoTe-2//AC achieved an excellent energy density of 51.1 W h kg(-1) at a power density of 2294 W kg(-1) and confirmed the as-synthesized Co-decorated Te NTs to be an excellent electrode material.},
	keywords = {cobalt, nanotubes, pseudocapacitors, surfactant, Tellurium, template},
	doi = {10.1021/acsanm.1c01613},
	author = {Bhol, Prangya and Swain, Swarnalata and Jena, Satyaranjan and Bhatte, Kushal and Rout, Chandra Sekhar and Saxena, Manav and Jadhav, Arvind H. and Samal, Akshaya K.}
}
