@article { ISI:000229103900015, title = {Nanostructured tin oxide: synthesis and gas-sensing properties}, journal = {Materials Chemistry and Physics}, volume = {92}, number = {2-3}, year = {2005}, month = {AUG}, pages = {384-388}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Pure and Ru-doped nanostructured SnO2 sensing materials were synthesized using a modified Pechini route. Incorporation of Ru in SnO2 results in the reduction of particle size (8.3 nm) compared with that of the pure SnO2 (28.2 nm). Moreover, the sensor exhibited a reasonably good sensitivity towards both H-2 and liquified petroleum gas (LPG). The effect of Ru incorporation, operating temperature, and gas concentration on the structure, morphology, and sensitivity is discussed using the results of X-ray diffraction (XRD), and scanning electron microscopy (SEM) along with sensing performance. {\textcopyright} 2005 Elsevier B.V. All rights reserved.

}, keywords = {hydrogen and hydrocarbon sensor, Nanostructure, ruthenium, tin oxide}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2005.01.050}, author = {Niranjan, R. S. and Hwang, Young Kyu and Kim, D. K. and Jhung, S. H. and Chang, J. S. and Mulla, Imtiaz S.} } @article { ISI:000238491100062, title = {Effect of calcination cycles on the preparation of tin oxide based traditional drug: studies on its formation and characterization}, journal = {Journal of Pharmaceutical and Biomedical Analysis}, volume = {41}, number = {4}, year = {2006}, month = {JUN}, pages = {1473-1478}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, type = {Article}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND}, abstract = {

The preparation method of metal based Indian traditional drugs involves conversion of a pure metal into its oxide by repeated high temperature calcination cycles. In this work, the effect of number of calcination cycles followed in the preparation of tin oxide based Ayurvedic drug, {\textquoteleft}vanga bhasma{\textquoteright} was studied by a systematic characterization of the drug samples after various calcination stages. It was found that tin was in the form of Sn4+ state and that the formation of SnO2 proceeded step-wise through Sn(OH)(4). (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {calcination cycles, Oxidation, oxidation state of tin, Particle size, tin oxide, vanga bhasma}, issn = {0731-7085}, doi = {10.1016/j.jpba.2006.03.032}, author = {Wadekar, M. P. and Rode, C. V. and Bendale, Y. N. and Patil, K. R. and Gaikwad, A. B. and Prabhune, Asmita} } @article { ISI:000242931900034, title = {Field emission from oriented tin oxide rods}, journal = {Thin Solid Films}, volume = {515}, number = {4}, year = {2006}, month = {DEC}, pages = {1450-1454}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Tin oxide (SnO2) films were grown on silicon substrates by a wet chemical route. It was found from scanning electron microscopy investigations that oriented SnO2 rods normal to the substrates were obtained. Field emission studies were carried out in diode configuration in an all metal ultra high vacuum chamber at a base pressure similar to 1.33 x 10(-8) mbar. The {\textquoteleft}onset{\textquoteright} field required to draw 0.1 mu A/cm(2) current density from the emitter cathode was found to be similar to 3.4 V/mu m for SnO2 rods. The field emission current and applied field follows the Folwer-Nordheim relationship in low field regime. The observed results indicate that the field emission characteristics of chemically grown SnO2 structures are comparable to the vapor grown nanostructures. (c) 2006 Elsevier B.V. All rights reserved.

}, keywords = {field emission, microstructures, scanning electron microscopy, tin oxide}, issn = {0040-6090}, doi = {10.1016/j.tsf.2006.04.034}, author = {Deshpande, A. C. and Koinkar, Pankaj M. and Ashtaputre, S. S. and More, Mahendra A. and Gosavi, S. W. and Godbole, P. D. and Joag, Dilip S. and Kulkarni, S. K.} } @article { ISI:000252474200009, title = {Low voltage varistor ceramics based on SnO2}, journal = {Bulletin of Materials Science}, volume = {30}, number = {6}, year = {2007}, month = {DEC}, pages = {583-586}, publisher = {SPRINGER}, type = {Article}, address = {233 SPRING STREET, NEW YORK, NY 10013 USA}, abstract = {

The nonlinear current (I)-voltage (V) characteristics of tin dioxide doped with either Nb2O5 and CoO or Sb2O3 and CoO show promising values of nonlinear coefficient (alpha) values (similar to 11) with low breakdown voltages (E-B, similar to 40 V mm(-1)). The pentavalent antimony or niobium acts as donor and increases the electronic conductivity. The crucial parameter for obtaining low breakdown voltage is the grain size, which depends upon sintering duration and temperature of these oxide ceramics.

}, keywords = {Chemical synthesis, electronic materials, Microstructure, tin oxide, X-ray diffraction}, issn = {0250-4707}, doi = {10.1007/s12034-007-0092-8}, author = {Dhage, S. R. and Ravi, V. and Yang, O. B.} } @article { ISI:000255692100010, title = {Fe-doped SnO(2) nanomaterial: a low temperature hydrogen sulfide gas sensor}, journal = {Materials Chemistry and Physics}, volume = {109}, number = {2-3}, year = {2008}, month = {JUN}, pages = {230-234}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

The effect of Fe-doping on the surface chemistry and gas-sensing properties of nanocrystalline tin oxide is analyzed. The pristine and Fe-doped SnO(2) are synthesized by the modified Pechini citrate route that produces around 40 and 18 nm sized nanoparticles, respectively. 1 at.\% Fe-doped SnO(2) shows significantly high selectivity towards hydrogen sulfide gas with capability to detect even 10 ppm of hydrogen sulfide at room temperature, with change of about one order of magnitude in the resistance within 5-15 s. In comparison, pristine SnO(2) shows negligible response towards H(2)S at room temperature. The ideal response and recovery of Fe-doped SnO(2) at low concentration of gas suggests Fe-doped SnO(2) nanomaterial as a potential low cost, low temperature H(2)S gas sensor. (C) 2007 Elsevier B.V. All rights reserved.

}, keywords = {Fe-doping, H(2)S, nanomaterial, Sensor, tin oxide}, issn = {0254-0584}, doi = {10.1016/j.matchemphys.2007.11.024}, author = {Vaishampayan, Mukta V. and Deshmukh, Rupah G. and Walke, Pravin and Mulla, Imtiaz S.} } @article { ISI:000256116100044, title = {Influence of Pd doping on morphology and LPG response of SnO2}, journal = {Sensors and Actuators B-Chemical}, volume = {131}, number = {2}, year = {2008}, month = {MAY}, pages = {665-672}, publisher = {ELSEVIER SCIENCE SA}, type = {Article}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

In the present study nanocrystalline pristine and Pd-doped SnO2 (Pd:SnO2) with various mol\% Pd have been synthesized by a modified Pechini citrate route. Transmission electron microscopy and X-ray powder diffraction studies were used to characterize the morphology, crystallinity, and structure of the SnO2 and Pd:SnO2. The response of the pristine SnO2 and Pd:SnO2 was studied towards different reducing gases. The 1.5 mol\% Pd doping showed an enhanced response of 75 and 95\% towards LPG at as low as 50 and 100 degrees C, respectively, which were quite large high value as compared with pristine SnO2 (38 and 35\% at 50 and 100 degrees C, respectively). Structural characterization revealed that Pd doping reduced the crystallite size of SnO2 and helps in the formation of distinct spherical nanospheres at a calcinations temperature of 500 degrees C. Thus the increase in LPG response can be correlated with the spherical morphology, a decrease in the crystallite size (11 nm) due to doping with Pd as compared with the pristine SnO2 (26 nm) and main role of Pd as a catalyst. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {LPG sensor, nanospheres, palladium doping, tin oxide}, issn = {0925-4005}, doi = {10.1016/j.snb.2007.12.055}, author = {Vaishampayan, Mukta V. and Deshmukh, Rupali G. and Mulla, Imtiaz S.} } @article { ISI:000258037300073, title = {RuO(2) doped SnO(2) nanobipyramids on Si (100) as a field emitter}, journal = {Thin Solid Films}, volume = {516}, number = {18}, year = {2008}, month = {JUL}, pages = {6388-6391}, publisher = {ELSEVIER SCIENCE SA}, address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND}, abstract = {

Thin films of RuO(2): SnO(2) nanobipyramids have been grown on silicon (100) flat substrates, and their field emission behavior has been investigated. The field emission experiments have been performed in parallel plate configuration. In this experiment, the onset field for 0. 1 gA/ cm 2 current density has been found to be 0.2 V/mu m. The Fowler-Nordheim plot shows non-linear nature typical that of a semiconductor. The field enhancement factor has been estimated to be 35,600 cm(-1), indicating that the field emission originates from the nanometric features of the emitter. The current stability recorded at a preset value of I tA is observed to be good. Our field emission results on RuO(2): SnO(2) nanobipyramids indicate that, RuO(2): SnO(2) nanobipyramids are a potential candidate for futuristic field emission based devices. (c) 2008 Elsevier B.V. All rights reserved.

}, keywords = {doped semiconductor, field emitter, field enhancement factor, ruthenium oxide, tin oxide}, issn = {0040-6090}, doi = {10.1016/j.tsf.2007.12.160}, author = {Bhise, Ashok B. and Late, Dattatray J. and Ramgir, Niranjan S. and More, Mahendra A. and Mulla, Imtiaz S. and Pillai, Vijayamohanan K. and Joag, Dilip S.} } @article {45744, title = {Concurrent synthesis of SnO/SnO2 nanocomposites and their enhanced photocatalytic activity}, journal = {Journal of Solid State Electrochemistry}, volume = {21}, year = {2017}, month = {JAN}, pages = {9-17}, type = {Article}, abstract = {

The SnO/SnO2 nanocomposites were synthesized using semisolvothermal reaction technique. These nanocomposites were prepared using different combination of solvents viz., ethanol, water, and ethylene glycol at 180 A degrees C for 24 h. The synthesized nanocomposites were analyzed with various characterization techniques. Structural analysis indicates the formation of tetragonal phase of SnO2 for the sample prepared in ethanol, whereas for other solvent combinations, the mixture of SnO and SnO2 having tetragonal crystal structures were observed. The optical study shows enhanced absorbance in the visible region for all the prepared SnO/SnO2 nanocomposites. The observed band gap was found to be in the range of 3.0 to 3.25 eV. Microstructural determinations confirm the formation of nanostructures having spherical as well as rod-like morphology. The size of nanoparticles in ethanol-mediated solvent was found to be in the range of 5 to 7 nm. Thermogravimetric analysis indicate the weight gain around 1.3 wt\% confirming the conversion of SnO to SnO2 material. The photocatalytic activity of synthesized nanocomposites was evaluated by following the aqueous methylene blue (MB) degradation. The sample prepared in ethylene glycol-mediated solvent showed highest photoactivity having apparent rate constant (K-app) 0.62 x 10(-2) min(-1).

}, keywords = {Dye-degradation, Nanocomposite, Photocatalysis, tin oxide}, issn = {1432-8488}, doi = {10.1007/s10008-016-3328-y}, author = {Roy, Animesh and Arbuj, Sudhir and Waghadkar, Yogesh and Shinde, Manish and Umarji, Govind and Rane, Sunit and Patil, Kashinath and Gosavi, Suresh and Chauhan, Ratna} }